xtensa: add support for the XTFPGA boards
The Avnet LX60/LX110/LX200 board is an FPGA board that can be configured with an Xtensa processor and an OpenCores Ethernet device. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
This commit is contained in:
Родитель
da844a8177
Коммит
0d456bad36
|
@ -151,6 +151,15 @@ config XTENSA_PLATFORM_S6105
|
||||||
select SERIAL_CONSOLE
|
select SERIAL_CONSOLE
|
||||||
select NO_IOPORT
|
select NO_IOPORT
|
||||||
|
|
||||||
|
config XTENSA_PLATFORM_XTFPGA
|
||||||
|
bool "XTFPGA"
|
||||||
|
select SERIAL_CONSOLE
|
||||||
|
select ETHOC
|
||||||
|
select XTENSA_CALIBRATE_CCOUNT
|
||||||
|
help
|
||||||
|
XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
|
||||||
|
This hardware is capable of running a full Linux distribution.
|
||||||
|
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
|
|
||||||
|
|
|
@ -38,6 +38,7 @@ endif
|
||||||
platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000
|
platform-$(CONFIG_XTENSA_PLATFORM_XT2000) := xt2000
|
||||||
platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss
|
platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss
|
||||||
platform-$(CONFIG_XTENSA_PLATFORM_S6105) := s6105
|
platform-$(CONFIG_XTENSA_PLATFORM_S6105) := s6105
|
||||||
|
platform-$(CONFIG_XTENSA_PLATFORM_XTFPGA) := xtfpga
|
||||||
|
|
||||||
PLATFORM = $(platform-y)
|
PLATFORM = $(platform-y)
|
||||||
export PLATFORM
|
export PLATFORM
|
||||||
|
|
|
@ -23,6 +23,7 @@ subdir-y := lib
|
||||||
|
|
||||||
bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
|
bootdir-$(CONFIG_XTENSA_PLATFORM_ISS) += boot-elf
|
||||||
bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
|
bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
|
||||||
|
bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
|
||||||
|
|
||||||
|
|
||||||
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
|
BUILTIN_DTB := $(patsubst "%",%,$(CONFIG_BUILTIN_DTB)).dtb.o
|
||||||
|
|
|
@ -0,0 +1,9 @@
|
||||||
|
# Makefile for the Tensilica xtavnet Emulation Board
|
||||||
|
#
|
||||||
|
# Note! Dependencies are done automagically by 'make dep', which also
|
||||||
|
# removes any old dependencies. DON'T put your own dependencies here
|
||||||
|
# unless it's something special (ie not a .c file).
|
||||||
|
#
|
||||||
|
# Note 2! The CFLAGS definitions are in the main makefile...
|
||||||
|
|
||||||
|
obj-y = setup.o lcd.o
|
|
@ -0,0 +1,69 @@
|
||||||
|
/*
|
||||||
|
* arch/xtensa/platform/xtavnet/include/platform/hardware.h
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU General Public
|
||||||
|
* License. See the file "COPYING" in the main directory of this archive
|
||||||
|
* for more details.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2006 Tensilica Inc.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This file contains the hardware configuration of the XTAVNET boards.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __XTENSA_XTAVNET_HARDWARE_H
|
||||||
|
#define __XTENSA_XTAVNET_HARDWARE_H
|
||||||
|
|
||||||
|
/* By default NO_IRQ is defined to 0 in Linux, but we use the
|
||||||
|
interrupt 0 for UART... */
|
||||||
|
#define NO_IRQ -1
|
||||||
|
|
||||||
|
/* Memory configuration. */
|
||||||
|
|
||||||
|
#define PLATFORM_DEFAULT_MEM_START 0x00000000
|
||||||
|
#define PLATFORM_DEFAULT_MEM_SIZE 0x04000000
|
||||||
|
|
||||||
|
/* Interrupt configuration. */
|
||||||
|
|
||||||
|
#define PLATFORM_NR_IRQS 10
|
||||||
|
|
||||||
|
/* Default assignment of LX60 devices to external interrupts. */
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_HAS_SMP
|
||||||
|
#define DUART16552_INTNUM XCHAL_EXTINT3_NUM
|
||||||
|
#define OETH_IRQ XCHAL_EXTINT4_NUM
|
||||||
|
#else
|
||||||
|
#define DUART16552_INTNUM XCHAL_EXTINT0_NUM
|
||||||
|
#define OETH_IRQ XCHAL_EXTINT1_NUM
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device addresses and parameters.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* UART */
|
||||||
|
#define DUART16552_PADDR (XCHAL_KIO_PADDR + 0x0D050020)
|
||||||
|
/* LCD instruction and data addresses. */
|
||||||
|
#define LCD_INSTR_ADDR ((char *)IOADDR(0x0D040000))
|
||||||
|
#define LCD_DATA_ADDR ((char *)IOADDR(0x0D040004))
|
||||||
|
|
||||||
|
/* Misc. */
|
||||||
|
#define XTFPGA_FPGAREGS_VADDR IOADDR(0x0D020000)
|
||||||
|
/* Clock frequency in Hz (read-only): */
|
||||||
|
#define XTFPGA_CLKFRQ_VADDR (XTFPGA_FPGAREGS_VADDR + 0x04)
|
||||||
|
/* Setting of 8 DIP switches: */
|
||||||
|
#define DIP_SWITCHES_VADDR (XTFPGA_FPGAREGS_VADDR + 0x0C)
|
||||||
|
/* Software reset (write 0xdead): */
|
||||||
|
#define XTFPGA_SWRST_VADDR (XTFPGA_FPGAREGS_VADDR + 0x10)
|
||||||
|
|
||||||
|
/* OpenCores Ethernet controller: */
|
||||||
|
/* regs + RX/TX descriptors */
|
||||||
|
#define OETH_REGS_PADDR (XCHAL_KIO_PADDR + 0x0D030000)
|
||||||
|
#define OETH_REGS_SIZE 0x1000
|
||||||
|
#define OETH_SRAMBUFF_PADDR (XCHAL_KIO_PADDR + 0x0D800000)
|
||||||
|
|
||||||
|
/* 5*rx buffs + 5*tx buffs */
|
||||||
|
#define OETH_SRAMBUFF_SIZE (5 * 0x600 + 5 * 0x600)
|
||||||
|
|
||||||
|
#endif /* __XTENSA_XTAVNET_HARDWARE_H */
|
|
@ -0,0 +1,20 @@
|
||||||
|
/*
|
||||||
|
* arch/xtensa/platform/xtavnet/include/platform/lcd.h
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU General Public
|
||||||
|
* License. See the file "COPYING" in the main directory of this archive
|
||||||
|
* for more details.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2001, 2006 Tensilica Inc.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __XTENSA_XTAVNET_LCD_H
|
||||||
|
#define __XTENSA_XTAVNET_LCD_H
|
||||||
|
|
||||||
|
/* Display string STR at position POS on the LCD. */
|
||||||
|
void lcd_disp_at_pos(char *str, unsigned char pos);
|
||||||
|
|
||||||
|
/* Shift the contents of the LCD display left or right. */
|
||||||
|
void lcd_shiftleft(void);
|
||||||
|
void lcd_shiftright(void);
|
||||||
|
#endif
|
|
@ -0,0 +1,18 @@
|
||||||
|
/*
|
||||||
|
* arch/xtensa/platform/xtavnet/include/platform/serial.h
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU General Public
|
||||||
|
* License. See the file "COPYING" in the main directory of this archive
|
||||||
|
* for more details.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2001, 2006 Tensilica Inc.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __ASM_XTENSA_XTAVNET_SERIAL_H
|
||||||
|
#define __ASM_XTENSA_XTAVNET_SERIAL_H
|
||||||
|
|
||||||
|
#include <platform/hardware.h>
|
||||||
|
|
||||||
|
#define BASE_BAUD (*(long *)XTFPGA_CLKFRQ_VADDR / 16)
|
||||||
|
|
||||||
|
#endif /* __ASM_XTENSA_XTAVNET_SERIAL_H */
|
|
@ -0,0 +1,76 @@
|
||||||
|
/*
|
||||||
|
* Driver for the LCD display on the Tensilica LX60 Board.
|
||||||
|
*
|
||||||
|
* This file is subject to the terms and conditions of the GNU General Public
|
||||||
|
* License. See the file "COPYING" in the main directory of this archive
|
||||||
|
* for more details.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2001, 2006 Tensilica Inc.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
*
|
||||||
|
* FIXME: this code is from the examples from the LX60 user guide.
|
||||||
|
*
|
||||||
|
* The lcd_pause function does busy waiting, which is probably not
|
||||||
|
* great. Maybe the code could be changed to use kernel timers, or
|
||||||
|
* change the hardware to not need to wait.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/io.h>
|
||||||
|
|
||||||
|
#include <platform/hardware.h>
|
||||||
|
#include <platform/lcd.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
|
||||||
|
#define LCD_PAUSE_ITERATIONS 4000
|
||||||
|
#define LCD_CLEAR 0x1
|
||||||
|
#define LCD_DISPLAY_ON 0xc
|
||||||
|
|
||||||
|
/* 8bit and 2 lines display */
|
||||||
|
#define LCD_DISPLAY_MODE8BIT 0x38
|
||||||
|
#define LCD_DISPLAY_POS 0x80
|
||||||
|
#define LCD_SHIFT_LEFT 0x18
|
||||||
|
#define LCD_SHIFT_RIGHT 0x1c
|
||||||
|
|
||||||
|
static int __init lcd_init(void)
|
||||||
|
{
|
||||||
|
*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
|
||||||
|
mdelay(5);
|
||||||
|
*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
|
||||||
|
udelay(200);
|
||||||
|
*LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
|
||||||
|
udelay(50);
|
||||||
|
*LCD_INSTR_ADDR = LCD_DISPLAY_ON;
|
||||||
|
udelay(50);
|
||||||
|
*LCD_INSTR_ADDR = LCD_CLEAR;
|
||||||
|
mdelay(10);
|
||||||
|
lcd_disp_at_pos("XTENSA LINUX", 0);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void lcd_disp_at_pos(char *str, unsigned char pos)
|
||||||
|
{
|
||||||
|
*LCD_INSTR_ADDR = LCD_DISPLAY_POS | pos;
|
||||||
|
udelay(100);
|
||||||
|
while (*str != 0) {
|
||||||
|
*LCD_DATA_ADDR = *str;
|
||||||
|
udelay(200);
|
||||||
|
str++;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void lcd_shiftleft(void)
|
||||||
|
{
|
||||||
|
*LCD_INSTR_ADDR = LCD_SHIFT_LEFT;
|
||||||
|
udelay(50);
|
||||||
|
}
|
||||||
|
|
||||||
|
void lcd_shiftright(void)
|
||||||
|
{
|
||||||
|
*LCD_INSTR_ADDR = LCD_SHIFT_RIGHT;
|
||||||
|
udelay(50);
|
||||||
|
}
|
||||||
|
|
||||||
|
arch_initcall(lcd_init);
|
|
@ -0,0 +1,269 @@
|
||||||
|
/*
|
||||||
|
*
|
||||||
|
* arch/xtensa/platform/xtavnet/setup.c
|
||||||
|
*
|
||||||
|
* ...
|
||||||
|
*
|
||||||
|
* Authors: Chris Zankel <chris@zankel.net>
|
||||||
|
* Joe Taylor <joe@tensilica.com>
|
||||||
|
*
|
||||||
|
* Copyright 2001 - 2006 Tensilica Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify it
|
||||||
|
* under the terms of the GNU General Public License as published by the
|
||||||
|
* Free Software Foundation; either version 2 of the License, or (at your
|
||||||
|
* option) any later version.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#include <linux/stddef.h>
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/errno.h>
|
||||||
|
#include <linux/reboot.h>
|
||||||
|
#include <linux/kdev_t.h>
|
||||||
|
#include <linux/types.h>
|
||||||
|
#include <linux/major.h>
|
||||||
|
#include <linux/console.h>
|
||||||
|
#include <linux/delay.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
|
||||||
|
#include <asm/timex.h>
|
||||||
|
#include <asm/processor.h>
|
||||||
|
#include <asm/platform.h>
|
||||||
|
#include <asm/bootparam.h>
|
||||||
|
#include <platform/lcd.h>
|
||||||
|
|
||||||
|
void platform_halt(void)
|
||||||
|
{
|
||||||
|
lcd_disp_at_pos(" HALT ", 0);
|
||||||
|
local_irq_disable();
|
||||||
|
while (1)
|
||||||
|
cpu_relax();
|
||||||
|
}
|
||||||
|
|
||||||
|
void platform_power_off(void)
|
||||||
|
{
|
||||||
|
lcd_disp_at_pos("POWEROFF", 0);
|
||||||
|
local_irq_disable();
|
||||||
|
while (1)
|
||||||
|
cpu_relax();
|
||||||
|
}
|
||||||
|
|
||||||
|
void platform_restart(void)
|
||||||
|
{
|
||||||
|
/* Flush and reset the mmu, simulate a processor reset, and
|
||||||
|
* jump to the reset vector. */
|
||||||
|
|
||||||
|
|
||||||
|
__asm__ __volatile__ ("movi a2, 15\n\t"
|
||||||
|
"wsr a2, icountlevel\n\t"
|
||||||
|
"movi a2, 0\n\t"
|
||||||
|
"wsr a2, icount\n\t"
|
||||||
|
"wsr a2, ibreakenable\n\t"
|
||||||
|
"wsr a2, lcount\n\t"
|
||||||
|
"movi a2, 0x1f\n\t"
|
||||||
|
"wsr a2, ps\n\t"
|
||||||
|
"isync\n\t"
|
||||||
|
"jx %0\n\t"
|
||||||
|
:
|
||||||
|
: "a" (XCHAL_RESET_VECTOR_VADDR)
|
||||||
|
: "a2"
|
||||||
|
);
|
||||||
|
|
||||||
|
/* control never gets here */
|
||||||
|
}
|
||||||
|
|
||||||
|
void __init platform_setup(char **cmdline)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_OF
|
||||||
|
|
||||||
|
static void __init update_clock_frequency(struct device_node *node)
|
||||||
|
{
|
||||||
|
struct property *newfreq;
|
||||||
|
u32 freq;
|
||||||
|
|
||||||
|
if (!of_property_read_u32(node, "clock-frequency", &freq) &&
|
||||||
|
freq != 0)
|
||||||
|
return;
|
||||||
|
|
||||||
|
newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL);
|
||||||
|
if (!newfreq)
|
||||||
|
return;
|
||||||
|
newfreq->value = newfreq + 1;
|
||||||
|
newfreq->length = sizeof(freq);
|
||||||
|
newfreq->name = kstrdup("clock-frequency", GFP_KERNEL);
|
||||||
|
if (!newfreq->name) {
|
||||||
|
kfree(newfreq);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
*(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
|
||||||
|
prom_update_property(node, newfreq);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int __init machine_setup(void)
|
||||||
|
{
|
||||||
|
struct device_node *serial = NULL;
|
||||||
|
|
||||||
|
while ((serial = of_find_compatible_node(serial, NULL, "ns16550a")))
|
||||||
|
update_clock_frequency(serial);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
arch_initcall(machine_setup);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* early initialization */
|
||||||
|
|
||||||
|
void __init platform_init(bp_tag_t *first)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Heartbeat. */
|
||||||
|
|
||||||
|
void platform_heartbeat(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
|
||||||
|
|
||||||
|
void platform_calibrate_ccount(void)
|
||||||
|
{
|
||||||
|
long clk_freq = 0;
|
||||||
|
#ifdef CONFIG_OF
|
||||||
|
struct device_node *cpu =
|
||||||
|
of_find_compatible_node(NULL, NULL, "xtensa,cpu");
|
||||||
|
if (cpu) {
|
||||||
|
u32 freq;
|
||||||
|
update_clock_frequency(cpu);
|
||||||
|
if (!of_property_read_u32(cpu, "clock-frequency", &freq))
|
||||||
|
clk_freq = freq;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
if (!clk_freq)
|
||||||
|
clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
|
||||||
|
|
||||||
|
ccount_per_jiffy = clk_freq / HZ;
|
||||||
|
nsec_per_ccount = 1000000000UL / clk_freq;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_OF
|
||||||
|
|
||||||
|
#include <linux/serial_8250.h>
|
||||||
|
#include <linux/if.h>
|
||||||
|
#include <net/ethoc.h>
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Ethernet -- OpenCores Ethernet MAC (ethoc driver)
|
||||||
|
*/
|
||||||
|
|
||||||
|
static struct resource ethoc_res[] __initdata = {
|
||||||
|
[0] = { /* register space */
|
||||||
|
.start = OETH_REGS_PADDR,
|
||||||
|
.end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
|
||||||
|
.flags = IORESOURCE_MEM,
|
||||||
|
},
|
||||||
|
[1] = { /* buffer space */
|
||||||
|
.start = OETH_SRAMBUFF_PADDR,
|
||||||
|
.end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
|
||||||
|
.flags = IORESOURCE_MEM,
|
||||||
|
},
|
||||||
|
[2] = { /* IRQ number */
|
||||||
|
.start = OETH_IRQ,
|
||||||
|
.end = OETH_IRQ,
|
||||||
|
.flags = IORESOURCE_IRQ,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct ethoc_platform_data ethoc_pdata __initdata = {
|
||||||
|
/*
|
||||||
|
* The MAC address for these boards is 00:50:c2:13:6f:xx.
|
||||||
|
* The last byte (here as zero) is read from the DIP switches on the
|
||||||
|
* board.
|
||||||
|
*/
|
||||||
|
.hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
|
||||||
|
.phy_id = -1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct platform_device ethoc_device __initdata = {
|
||||||
|
.name = "ethoc",
|
||||||
|
.id = -1,
|
||||||
|
.num_resources = ARRAY_SIZE(ethoc_res),
|
||||||
|
.resource = ethoc_res,
|
||||||
|
.dev = {
|
||||||
|
.platform_data = ðoc_pdata,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* UART
|
||||||
|
*/
|
||||||
|
|
||||||
|
static struct resource serial_resource __initdata = {
|
||||||
|
.start = DUART16552_PADDR,
|
||||||
|
.end = DUART16552_PADDR + 0x1f,
|
||||||
|
.flags = IORESOURCE_MEM,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct plat_serial8250_port serial_platform_data[] __initdata = {
|
||||||
|
[0] = {
|
||||||
|
.mapbase = DUART16552_PADDR,
|
||||||
|
.irq = DUART16552_INTNUM,
|
||||||
|
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
|
||||||
|
UPF_IOREMAP,
|
||||||
|
.iotype = UPIO_MEM32,
|
||||||
|
.regshift = 2,
|
||||||
|
.uartclk = 0, /* set in xtavnet_init() */
|
||||||
|
},
|
||||||
|
{ },
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct platform_device xtavnet_uart __initdata = {
|
||||||
|
.name = "serial8250",
|
||||||
|
.id = PLAT8250_DEV_PLATFORM,
|
||||||
|
.dev = {
|
||||||
|
.platform_data = serial_platform_data,
|
||||||
|
},
|
||||||
|
.num_resources = 1,
|
||||||
|
.resource = &serial_resource,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* platform devices */
|
||||||
|
static struct platform_device *platform_devices[] __initdata = {
|
||||||
|
ðoc_device,
|
||||||
|
&xtavnet_uart,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static int __init xtavnet_init(void)
|
||||||
|
{
|
||||||
|
/* Ethernet MAC address. */
|
||||||
|
ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
|
||||||
|
|
||||||
|
/* Clock rate varies among FPGA bitstreams; board specific FPGA register
|
||||||
|
* reports the actual clock rate.
|
||||||
|
*/
|
||||||
|
serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
|
||||||
|
|
||||||
|
|
||||||
|
/* register platform devices */
|
||||||
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
||||||
|
|
||||||
|
/* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
|
||||||
|
* knows whether they set it correctly on the DIP switches.
|
||||||
|
*/
|
||||||
|
pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Register to be done during do_initcalls().
|
||||||
|
*/
|
||||||
|
arch_initcall(xtavnet_init);
|
||||||
|
|
||||||
|
#endif /* CONFIG_OF */
|
Загрузка…
Ссылка в новой задаче