drm/tilcdc: add support for LCD panels (v5)

Add an output panel driver for LCD panels.  Tested with LCD3 cape on
beaglebone.

v1: original
v2: s/of_find_node_by_name()/of_get_child_by_name()/ from Pantelis
    Antoniou
v3: add backlight support
v4: rebase to latest of video timing helpers
v5: remove some unneeded fields from panel-info struct, add DT bindings
    docs

Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
This commit is contained in:
Rob Clark 2012-12-18 17:34:16 -06:00
Родитель 6e8de0bd6a
Коммит 0d4bbaf9f3
6 изменённых файлов: 528 добавлений и 0 удалений

Просмотреть файл

@ -0,0 +1,59 @@
Device-Tree bindings for tilcdc DRM generic panel output driver
Required properties:
- compatible: value should be "ti,tilcdc,panel".
- panel-info: configuration info to configure LCDC correctly for the panel
- ac-bias: AC Bias Pin Frequency
- ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
- dma-burst-sz: DMA burst size
- bpp: Bits per pixel
- fdd: FIFO DMA Request Delay
- sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
- sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
- raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
- fifo-th: DMA FIFO threshold
- display-timings: typical videomode of lcd panel. Multiple video modes
can be listed if the panel supports multiple timings, but the 'native-mode'
should be the preferred/default resolution. Refer to
Documentation/devicetree/bindings/video/display-timing.txt for display
timing binding details.
Recommended properties:
- pinctrl-names, pinctrl-0: the pincontrol settings to configure
muxing properly for pins that connect to TFP410 device
Example:
/* Settings for CDTech_S035Q01 / LCD3 cape: */
lcd3 {
compatible = "ti,tilcdc,panel";
pinctrl-names = "default";
pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
panel-info {
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <16>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
native-mode = <&timing0>;
timing0: 320x240 {
hactive = <320>;
vactive = <240>;
hback-porch = <21>;
hfront-porch = <58>;
hsync-len = <47>;
vback-porch = <11>;
vfront-porch = <23>;
vsync-len = <2>;
clock-frequency = <8000000>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};

Просмотреть файл

@ -4,6 +4,9 @@ config DRM_TILCDC
select DRM_KMS_HELPER
select DRM_KMS_CMA_HELPER
select DRM_GEM_CMA_HELPER
select OF_VIDEOMODE
select OF_DISPLAY_TIMING
select BACKLIGHT_CLASS_DEVICE
help
Choose this option if you have an TI SoC with LCDC display
controller, for example AM33xx in beagle-bone, DA8xx, or

Просмотреть файл

@ -4,6 +4,7 @@ tilcdc-y := \
tilcdc_crtc.o \
tilcdc_tfp410.o \
tilcdc_slave.o \
tilcdc_panel.o \
tilcdc_drv.o
obj-$(CONFIG_DRM_TILCDC) += tilcdc.o

Просмотреть файл

@ -21,6 +21,7 @@
#include "tilcdc_regs.h"
#include "tilcdc_tfp410.h"
#include "tilcdc_slave.h"
#include "tilcdc_panel.h"
#include "drm_fb_helper.h"
@ -589,6 +590,7 @@ static int __init tilcdc_drm_init(void)
DBG("init");
tilcdc_tfp410_init();
tilcdc_slave_init();
tilcdc_panel_init();
return platform_driver_register(&tilcdc_platform_driver);
}
@ -597,6 +599,7 @@ static void __exit tilcdc_drm_fini(void)
DBG("fini");
tilcdc_tfp410_fini();
tilcdc_slave_fini();
tilcdc_panel_fini();
platform_driver_unregister(&tilcdc_platform_driver);
}

Просмотреть файл

@ -0,0 +1,436 @@
/*
* Copyright (C) 2012 Texas Instruments
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/consumer.h>
#include <linux/backlight.h>
#include <video/display_timing.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
#include "tilcdc_drv.h"
struct panel_module {
struct tilcdc_module base;
struct tilcdc_panel_info *info;
struct display_timings *timings;
struct backlight_device *backlight;
};
#define to_panel_module(x) container_of(x, struct panel_module, base)
/*
* Encoder:
*/
struct panel_encoder {
struct drm_encoder base;
struct panel_module *mod;
};
#define to_panel_encoder(x) container_of(x, struct panel_encoder, base)
static void panel_encoder_destroy(struct drm_encoder *encoder)
{
struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
drm_encoder_cleanup(encoder);
kfree(panel_encoder);
}
static void panel_encoder_dpms(struct drm_encoder *encoder, int mode)
{
struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
struct backlight_device *backlight = panel_encoder->mod->backlight;
if (!backlight)
return;
backlight->props.power = mode == DRM_MODE_DPMS_ON
? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
backlight_update_status(backlight);
}
static bool panel_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/* nothing needed */
return true;
}
static void panel_encoder_prepare(struct drm_encoder *encoder)
{
struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
panel_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
tilcdc_crtc_set_panel_info(encoder->crtc, panel_encoder->mod->info);
}
static void panel_encoder_commit(struct drm_encoder *encoder)
{
panel_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
}
static void panel_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
/* nothing needed */
}
static const struct drm_encoder_funcs panel_encoder_funcs = {
.destroy = panel_encoder_destroy,
};
static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
.dpms = panel_encoder_dpms,
.mode_fixup = panel_encoder_mode_fixup,
.prepare = panel_encoder_prepare,
.commit = panel_encoder_commit,
.mode_set = panel_encoder_mode_set,
};
static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
struct panel_module *mod)
{
struct panel_encoder *panel_encoder;
struct drm_encoder *encoder;
int ret;
panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL);
if (!panel_encoder) {
dev_err(dev->dev, "allocation failed\n");
return NULL;
}
panel_encoder->mod = mod;
encoder = &panel_encoder->base;
encoder->possible_crtcs = 1;
ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
DRM_MODE_ENCODER_LVDS);
if (ret < 0)
goto fail;
drm_encoder_helper_add(encoder, &panel_encoder_helper_funcs);
return encoder;
fail:
panel_encoder_destroy(encoder);
return NULL;
}
/*
* Connector:
*/
struct panel_connector {
struct drm_connector base;
struct drm_encoder *encoder; /* our connected encoder */
struct panel_module *mod;
};
#define to_panel_connector(x) container_of(x, struct panel_connector, base)
static void panel_connector_destroy(struct drm_connector *connector)
{
struct panel_connector *panel_connector = to_panel_connector(connector);
drm_connector_cleanup(connector);
kfree(panel_connector);
}
static enum drm_connector_status panel_connector_detect(
struct drm_connector *connector,
bool force)
{
return connector_status_connected;
}
static int panel_connector_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct panel_connector *panel_connector = to_panel_connector(connector);
struct display_timings *timings = panel_connector->mod->timings;
int i;
for (i = 0; i < timings->num_timings; i++) {
struct drm_display_mode *mode = drm_mode_create(dev);
struct videomode vm;
if (videomode_from_timing(timings, &vm, i))
break;
drm_display_mode_from_videomode(&vm, mode);
mode->type = DRM_MODE_TYPE_DRIVER;
if (timings->native_mode == i)
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
}
return i;
}
static int panel_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct tilcdc_drm_private *priv = connector->dev->dev_private;
/* our only constraints are what the crtc can generate: */
return tilcdc_crtc_mode_valid(priv->crtc, mode);
}
static struct drm_encoder *panel_connector_best_encoder(
struct drm_connector *connector)
{
struct panel_connector *panel_connector = to_panel_connector(connector);
return panel_connector->encoder;
}
static const struct drm_connector_funcs panel_connector_funcs = {
.destroy = panel_connector_destroy,
.dpms = drm_helper_connector_dpms,
.detect = panel_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
};
static const struct drm_connector_helper_funcs panel_connector_helper_funcs = {
.get_modes = panel_connector_get_modes,
.mode_valid = panel_connector_mode_valid,
.best_encoder = panel_connector_best_encoder,
};
static struct drm_connector *panel_connector_create(struct drm_device *dev,
struct panel_module *mod, struct drm_encoder *encoder)
{
struct panel_connector *panel_connector;
struct drm_connector *connector;
int ret;
panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL);
if (!panel_connector) {
dev_err(dev->dev, "allocation failed\n");
return NULL;
}
panel_connector->encoder = encoder;
panel_connector->mod = mod;
connector = &panel_connector->base;
drm_connector_init(dev, connector, &panel_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_connector_helper_add(connector, &panel_connector_helper_funcs);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
ret = drm_mode_connector_attach_encoder(connector, encoder);
if (ret)
goto fail;
drm_sysfs_connector_add(connector);
return connector;
fail:
panel_connector_destroy(connector);
return NULL;
}
/*
* Module:
*/
static int panel_modeset_init(struct tilcdc_module *mod, struct drm_device *dev)
{
struct panel_module *panel_mod = to_panel_module(mod);
struct tilcdc_drm_private *priv = dev->dev_private;
struct drm_encoder *encoder;
struct drm_connector *connector;
encoder = panel_encoder_create(dev, panel_mod);
if (!encoder)
return -ENOMEM;
connector = panel_connector_create(dev, panel_mod, encoder);
if (!connector)
return -ENOMEM;
priv->encoders[priv->num_encoders++] = encoder;
priv->connectors[priv->num_connectors++] = connector;
return 0;
}
static void panel_destroy(struct tilcdc_module *mod)
{
struct panel_module *panel_mod = to_panel_module(mod);
if (panel_mod->timings) {
display_timings_release(panel_mod->timings);
kfree(panel_mod->timings);
}
tilcdc_module_cleanup(mod);
kfree(panel_mod->info);
kfree(panel_mod);
}
static const struct tilcdc_module_ops panel_module_ops = {
.modeset_init = panel_modeset_init,
.destroy = panel_destroy,
};
/*
* Device:
*/
/* maybe move this somewhere common if it is needed by other outputs? */
static struct tilcdc_panel_info * of_get_panel_info(struct device_node *np)
{
struct device_node *info_np;
struct tilcdc_panel_info *info;
int ret = 0;
if (!np) {
pr_err("%s: no devicenode given\n", __func__);
return NULL;
}
info_np = of_get_child_by_name(np, "panel-info");
if (!info_np) {
pr_err("%s: could not find panel-info node\n", __func__);
return NULL;
}
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
pr_err("%s: allocation failed\n", __func__);
return NULL;
}
ret |= of_property_read_u32(info_np, "ac-bias", &info->ac_bias);
ret |= of_property_read_u32(info_np, "ac-bias-intrpt", &info->ac_bias_intrpt);
ret |= of_property_read_u32(info_np, "dma-burst-sz", &info->dma_burst_sz);
ret |= of_property_read_u32(info_np, "bpp", &info->bpp);
ret |= of_property_read_u32(info_np, "fdd", &info->fdd);
ret |= of_property_read_u32(info_np, "sync-edge", &info->sync_edge);
ret |= of_property_read_u32(info_np, "sync-ctrl", &info->sync_ctrl);
ret |= of_property_read_u32(info_np, "raster-order", &info->raster_order);
ret |= of_property_read_u32(info_np, "fifo-th", &info->fifo_th);
/* optional: */
info->tft_alt_mode = of_property_read_bool(info_np, "tft-alt-mode");
info->invert_pxl_clk = of_property_read_bool(info_np, "invert-pxl-clk");
if (ret) {
pr_err("%s: error reading panel-info properties\n", __func__);
kfree(info);
return NULL;
}
return info;
}
static struct of_device_id panel_of_match[];
static int panel_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct panel_module *panel_mod;
struct tilcdc_module *mod;
struct pinctrl *pinctrl;
int ret = -EINVAL;
/* bail out early if no DT data: */
if (!node) {
dev_err(&pdev->dev, "device-tree data is missing\n");
return -ENXIO;
}
panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
if (!panel_mod)
return -ENOMEM;
mod = &panel_mod->base;
tilcdc_module_init(mod, "panel", &panel_module_ops);
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev, "pins are not configured\n");
panel_mod->timings = of_get_display_timings(node);
if (!panel_mod->timings) {
dev_err(&pdev->dev, "could not get panel timings\n");
goto fail;
}
panel_mod->info = of_get_panel_info(node);
if (!panel_mod->info) {
dev_err(&pdev->dev, "could not get panel info\n");
goto fail;
}
panel_mod->backlight = of_find_backlight_by_node(node);
if (panel_mod->backlight)
dev_info(&pdev->dev, "found backlight\n");
return 0;
fail:
panel_destroy(mod);
return ret;
}
static int panel_remove(struct platform_device *pdev)
{
return 0;
}
static struct of_device_id panel_of_match[] = {
{ .compatible = "ti,tilcdc,panel", },
{ },
};
MODULE_DEVICE_TABLE(of, panel_of_match);
struct platform_driver panel_driver = {
.probe = panel_probe,
.remove = panel_remove,
.driver = {
.owner = THIS_MODULE,
.name = "panel",
.of_match_table = panel_of_match,
},
};
int __init tilcdc_panel_init(void)
{
return platform_driver_register(&panel_driver);
}
void __exit tilcdc_panel_fini(void)
{
platform_driver_unregister(&panel_driver);
}

Просмотреть файл

@ -0,0 +1,26 @@
/*
* Copyright (C) 2012 Texas Instruments
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __TILCDC_PANEL_H__
#define __TILCDC_PANEL_H__
/* sub-module for generic lcd panel output */
int tilcdc_panel_init(void);
void tilcdc_panel_fini(void);
#endif /* __TILCDC_PANEL_H__ */