i2c: add support for Socionext SynQuacer I2C controller
This is a cleaned up version of the I2C controller driver for the Fujitsu F_I2C IP, which was never supported upstream, and has now been incorporated into the Socionext SynQuacer SoC. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [wsa: updated MAINTAINERS entry and removed two empty lines] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Ard Biesheuvel
Wolfram Sang
Родитель
730b35e08c
Коммит
0d676a6c43
|
|
@ -12816,6 +12816,13 @@ F: include/media/soc*
|
|||
F: drivers/media/i2c/soc_camera/
|
||||
F: drivers/media/platform/soc_camera/
|
||||
|
||||
SOCIONEXT SYNQUACER I2C DRIVER
|
||||
M: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/i2c/busses/i2c-synquacer.c
|
||||
F: Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
|
||||
|
||||
SOCIONEXT UNIPHIER SOUND DRIVER
|
||||
M: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
|
||||
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
|
||||
|
|
|
|||
|
|
@ -997,6 +997,16 @@ config I2C_SUN6I_P2WI
|
|||
This interface is used to connect to specific PMIC devices (like the
|
||||
AXP221).
|
||||
|
||||
config I2C_SYNQUACER
|
||||
tristate "Socionext SynQuacer I2C controller"
|
||||
depends on ARCH_SYNQUACER || COMPILE_TEST
|
||||
help
|
||||
Say Y here to include support for the I2C controller used in some
|
||||
Fujitsu and Socionext SoCs.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-synquacer.
|
||||
|
||||
config I2C_TEGRA
|
||||
tristate "NVIDIA Tegra internal I2C controller"
|
||||
depends on ARCH_TEGRA
|
||||
|
|
|
|||
|
|
@ -98,6 +98,7 @@ obj-$(CONFIG_I2C_STM32F4) += i2c-stm32f4.o
|
|||
obj-$(CONFIG_I2C_STM32F7) += i2c-stm32f7.o
|
||||
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
|
||||
obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o
|
||||
obj-$(CONFIG_I2C_SYNQUACER) += i2c-synquacer.o
|
||||
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
|
||||
obj-$(CONFIG_I2C_TEGRA_BPMP) += i2c-tegra-bpmp.o
|
||||
obj-$(CONFIG_I2C_UNIPHIER) += i2c-uniphier.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,667 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 FUJITSU SEMICONDUCTOR LIMITED
|
||||
*/
|
||||
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#define WAIT_PCLK(n, rate) \
|
||||
ndelay(DIV_ROUND_UP(DIV_ROUND_UP(1000000000, rate), n) + 10)
|
||||
|
||||
/* I2C register address definitions */
|
||||
#define SYNQUACER_I2C_REG_BSR (0x00 << 2) // Bus Status
|
||||
#define SYNQUACER_I2C_REG_BCR (0x01 << 2) // Bus Control
|
||||
#define SYNQUACER_I2C_REG_CCR (0x02 << 2) // Clock Control
|
||||
#define SYNQUACER_I2C_REG_ADR (0x03 << 2) // Address
|
||||
#define SYNQUACER_I2C_REG_DAR (0x04 << 2) // Data
|
||||
#define SYNQUACER_I2C_REG_CSR (0x05 << 2) // Expansion CS
|
||||
#define SYNQUACER_I2C_REG_FSR (0x06 << 2) // Bus Clock Freq
|
||||
#define SYNQUACER_I2C_REG_BC2R (0x07 << 2) // Bus Control 2
|
||||
|
||||
/* I2C register bit definitions */
|
||||
#define SYNQUACER_I2C_BSR_FBT BIT(0) // First Byte Transfer
|
||||
#define SYNQUACER_I2C_BSR_GCA BIT(1) // General Call Address
|
||||
#define SYNQUACER_I2C_BSR_AAS BIT(2) // Address as Slave
|
||||
#define SYNQUACER_I2C_BSR_TRX BIT(3) // Transfer/Receive
|
||||
#define SYNQUACER_I2C_BSR_LRB BIT(4) // Last Received Bit
|
||||
#define SYNQUACER_I2C_BSR_AL BIT(5) // Arbitration Lost
|
||||
#define SYNQUACER_I2C_BSR_RSC BIT(6) // Repeated Start Cond.
|
||||
#define SYNQUACER_I2C_BSR_BB BIT(7) // Bus Busy
|
||||
|
||||
#define SYNQUACER_I2C_BCR_INT BIT(0) // Interrupt
|
||||
#define SYNQUACER_I2C_BCR_INTE BIT(1) // Interrupt Enable
|
||||
#define SYNQUACER_I2C_BCR_GCAA BIT(2) // Gen. Call Access Ack.
|
||||
#define SYNQUACER_I2C_BCR_ACK BIT(3) // Acknowledge
|
||||
#define SYNQUACER_I2C_BCR_MSS BIT(4) // Master Slave Select
|
||||
#define SYNQUACER_I2C_BCR_SCC BIT(5) // Start Condition Cont.
|
||||
#define SYNQUACER_I2C_BCR_BEIE BIT(6) // Bus Error Int Enable
|
||||
#define SYNQUACER_I2C_BCR_BER BIT(7) // Bus Error
|
||||
|
||||
#define SYNQUACER_I2C_CCR_CS_MASK (0x1f) // CCR Clock Period Sel.
|
||||
#define SYNQUACER_I2C_CCR_EN BIT(5) // Enable
|
||||
#define SYNQUACER_I2C_CCR_FM BIT(6) // Speed Mode Select
|
||||
|
||||
#define SYNQUACER_I2C_CSR_CS_MASK (0x3f) // CSR Clock Period Sel.
|
||||
|
||||
#define SYNQUACER_I2C_BC2R_SCLL BIT(0) // SCL Low Drive
|
||||
#define SYNQUACER_I2C_BC2R_SDAL BIT(1) // SDA Low Drive
|
||||
#define SYNQUACER_I2C_BC2R_SCLS BIT(4) // SCL Status
|
||||
#define SYNQUACER_I2C_BC2R_SDAS BIT(5) // SDA Status
|
||||
|
||||
/* PCLK frequency */
|
||||
#define SYNQUACER_I2C_BUS_CLK_FR(rate) (((rate) / 20000000) + 1)
|
||||
|
||||
/* STANDARD MODE frequency */
|
||||
#define SYNQUACER_I2C_CLK_MASTER_STD(rate) \
|
||||
DIV_ROUND_UP(DIV_ROUND_UP((rate), 100000) - 2, 2)
|
||||
/* FAST MODE frequency */
|
||||
#define SYNQUACER_I2C_CLK_MASTER_FAST(rate) \
|
||||
DIV_ROUND_UP((DIV_ROUND_UP((rate), 400000) - 2) * 2, 3)
|
||||
|
||||
/* (clkrate <= 18000000) */
|
||||
/* calculate the value of CS bits in CCR register on standard mode */
|
||||
#define SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rate) \
|
||||
((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 65) \
|
||||
& SYNQUACER_I2C_CCR_CS_MASK)
|
||||
|
||||
/* calculate the value of CS bits in CSR register on standard mode */
|
||||
#define SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rate) 0x00
|
||||
|
||||
/* calculate the value of CS bits in CCR register on fast mode */
|
||||
#define SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rate) \
|
||||
((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
|
||||
& SYNQUACER_I2C_CCR_CS_MASK)
|
||||
|
||||
/* calculate the value of CS bits in CSR register on fast mode */
|
||||
#define SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rate) 0x00
|
||||
|
||||
/* (clkrate > 18000000) */
|
||||
/* calculate the value of CS bits in CCR register on standard mode */
|
||||
#define SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rate) \
|
||||
((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) \
|
||||
& SYNQUACER_I2C_CCR_CS_MASK)
|
||||
|
||||
/* calculate the value of CS bits in CSR register on standard mode */
|
||||
#define SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rate) \
|
||||
(((SYNQUACER_I2C_CLK_MASTER_STD(rate) - 1) >> 5) \
|
||||
& SYNQUACER_I2C_CSR_CS_MASK)
|
||||
|
||||
/* calculate the value of CS bits in CCR register on fast mode */
|
||||
#define SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rate) \
|
||||
((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) \
|
||||
& SYNQUACER_I2C_CCR_CS_MASK)
|
||||
|
||||
/* calculate the value of CS bits in CSR register on fast mode */
|
||||
#define SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rate) \
|
||||
(((SYNQUACER_I2C_CLK_MASTER_FAST(rate) - 1) >> 5) \
|
||||
& SYNQUACER_I2C_CSR_CS_MASK)
|
||||
|
||||
/* min I2C clock frequency 14M */
|
||||
#define SYNQUACER_I2C_MIN_CLK_RATE (14 * 1000000)
|
||||
/* max I2C clock frequency 200M */
|
||||
#define SYNQUACER_I2C_MAX_CLK_RATE (200 * 1000000)
|
||||
/* I2C clock frequency 18M */
|
||||
#define SYNQUACER_I2C_CLK_RATE_18M (18 * 1000000)
|
||||
|
||||
#define SYNQUACER_I2C_SPEED_FM 400 // Fast Mode
|
||||
#define SYNQUACER_I2C_SPEED_SM 100 // Standard Mode
|
||||
|
||||
enum i2c_state {
|
||||
STATE_IDLE,
|
||||
STATE_START,
|
||||
STATE_READ,
|
||||
STATE_WRITE
|
||||
};
|
||||
|
||||
struct synquacer_i2c {
|
||||
struct completion completion;
|
||||
|
||||
struct i2c_msg *msg;
|
||||
u32 msg_num;
|
||||
u32 msg_idx;
|
||||
u32 msg_ptr;
|
||||
|
||||
int irq;
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct clk *pclk;
|
||||
u32 pclkrate;
|
||||
u32 speed_khz;
|
||||
u32 timeout_ms;
|
||||
enum i2c_state state;
|
||||
struct i2c_adapter adapter;
|
||||
|
||||
bool is_suspended;
|
||||
};
|
||||
|
||||
static inline int is_lastmsg(struct synquacer_i2c *i2c)
|
||||
{
|
||||
return i2c->msg_idx >= (i2c->msg_num - 1);
|
||||
}
|
||||
|
||||
static inline int is_msglast(struct synquacer_i2c *i2c)
|
||||
{
|
||||
return i2c->msg_ptr == (i2c->msg->len - 1);
|
||||
}
|
||||
|
||||
static inline int is_msgend(struct synquacer_i2c *i2c)
|
||||
{
|
||||
return i2c->msg_ptr >= i2c->msg->len;
|
||||
}
|
||||
|
||||
static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c,
|
||||
struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
unsigned long bit_count = 0;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < num; i++, msgs++)
|
||||
bit_count += msgs->len;
|
||||
|
||||
return DIV_ROUND_UP((bit_count * 9 + num * 10) * 3, 200) + 10;
|
||||
}
|
||||
|
||||
static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret)
|
||||
{
|
||||
/*
|
||||
* clear IRQ (INT=0, BER=0)
|
||||
* set Stop Condition (MSS=0)
|
||||
* Interrupt Disable
|
||||
*/
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
|
||||
i2c->state = STATE_IDLE;
|
||||
|
||||
i2c->msg_ptr = 0;
|
||||
i2c->msg = NULL;
|
||||
i2c->msg_idx++;
|
||||
i2c->msg_num = 0;
|
||||
if (ret)
|
||||
i2c->msg_idx = ret;
|
||||
|
||||
complete(&i2c->completion);
|
||||
}
|
||||
|
||||
static void synquacer_i2c_hw_init(struct synquacer_i2c *i2c)
|
||||
{
|
||||
unsigned char ccr_cs, csr_cs;
|
||||
u32 rt = i2c->pclkrate;
|
||||
|
||||
/* Set own Address */
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_ADR);
|
||||
|
||||
/* Set PCLK frequency */
|
||||
writeb(SYNQUACER_I2C_BUS_CLK_FR(i2c->pclkrate),
|
||||
i2c->base + SYNQUACER_I2C_REG_FSR);
|
||||
|
||||
switch (i2c->speed_khz) {
|
||||
case SYNQUACER_I2C_SPEED_FM:
|
||||
if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
|
||||
ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MAX_18M(rt);
|
||||
csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MAX_18M(rt);
|
||||
} else {
|
||||
ccr_cs = SYNQUACER_I2C_CCR_CS_FAST_MIN_18M(rt);
|
||||
csr_cs = SYNQUACER_I2C_CSR_CS_FAST_MIN_18M(rt);
|
||||
}
|
||||
|
||||
/* Set Clock and enable, Set fast mode */
|
||||
writeb(ccr_cs | SYNQUACER_I2C_CCR_FM |
|
||||
SYNQUACER_I2C_CCR_EN,
|
||||
i2c->base + SYNQUACER_I2C_REG_CCR);
|
||||
writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
|
||||
break;
|
||||
case SYNQUACER_I2C_SPEED_SM:
|
||||
if (i2c->pclkrate <= SYNQUACER_I2C_CLK_RATE_18M) {
|
||||
ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MAX_18M(rt);
|
||||
csr_cs = SYNQUACER_I2C_CSR_CS_STD_MAX_18M(rt);
|
||||
} else {
|
||||
ccr_cs = SYNQUACER_I2C_CCR_CS_STD_MIN_18M(rt);
|
||||
csr_cs = SYNQUACER_I2C_CSR_CS_STD_MIN_18M(rt);
|
||||
}
|
||||
|
||||
/* Set Clock and enable, Set standard mode */
|
||||
writeb(ccr_cs | SYNQUACER_I2C_CCR_EN,
|
||||
i2c->base + SYNQUACER_I2C_REG_CCR);
|
||||
writeb(csr_cs, i2c->base + SYNQUACER_I2C_REG_CSR);
|
||||
break;
|
||||
default:
|
||||
WARN_ON(1);
|
||||
}
|
||||
|
||||
/* clear IRQ (INT=0, BER=0), Interrupt Disable */
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_BC2R);
|
||||
}
|
||||
|
||||
static void synquacer_i2c_hw_reset(struct synquacer_i2c *i2c)
|
||||
{
|
||||
/* Disable clock */
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_CCR);
|
||||
writeb(0, i2c->base + SYNQUACER_I2C_REG_CSR);
|
||||
|
||||
WAIT_PCLK(100, i2c->pclkrate);
|
||||
}
|
||||
|
||||
static int synquacer_i2c_master_start(struct synquacer_i2c *i2c,
|
||||
struct i2c_msg *pmsg)
|
||||
{
|
||||
unsigned char bsr, bcr;
|
||||
|
||||
writeb(i2c_8bit_addr_from_msg(pmsg), i2c->base + SYNQUACER_I2C_REG_DAR);
|
||||
|
||||
dev_dbg(i2c->dev, "slave:0x%02x\n", pmsg->addr);
|
||||
|
||||
/* Generate Start Condition */
|
||||
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
||||
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
||||
|
||||
if ((bsr & SYNQUACER_I2C_BSR_BB) &&
|
||||
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
||||
dev_dbg(i2c->dev, "bus is busy");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
if (bsr & SYNQUACER_I2C_BSR_BB) { /* Bus is busy */
|
||||
dev_dbg(i2c->dev, "Continuous Start");
|
||||
writeb(bcr | SYNQUACER_I2C_BCR_SCC,
|
||||
i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
} else {
|
||||
if (bcr & SYNQUACER_I2C_BCR_MSS) {
|
||||
dev_dbg(i2c->dev, "not in master mode");
|
||||
return -EAGAIN;
|
||||
}
|
||||
dev_dbg(i2c->dev, "Start Condition");
|
||||
/* Start Condition + Enable Interrupts */
|
||||
writeb(bcr | SYNQUACER_I2C_BCR_MSS |
|
||||
SYNQUACER_I2C_BCR_INTE | SYNQUACER_I2C_BCR_BEIE,
|
||||
i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
}
|
||||
|
||||
WAIT_PCLK(10, i2c->pclkrate);
|
||||
|
||||
/* get BSR & BCR registers */
|
||||
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
||||
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
||||
|
||||
if ((bsr & SYNQUACER_I2C_BSR_AL) ||
|
||||
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
||||
dev_dbg(i2c->dev, "arbitration lost\n");
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
|
||||
struct i2c_msg *msgs, int num)
|
||||
{
|
||||
unsigned char bsr;
|
||||
unsigned long timeout;
|
||||
int ret;
|
||||
|
||||
if (i2c->is_suspended)
|
||||
return -EBUSY;
|
||||
|
||||
synquacer_i2c_hw_init(i2c);
|
||||
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
||||
if (bsr & SYNQUACER_I2C_BSR_BB) {
|
||||
dev_err(i2c->dev, "cannot get bus (bus busy)\n");
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
reinit_completion(&i2c->completion);
|
||||
|
||||
i2c->msg = msgs;
|
||||
i2c->msg_num = num;
|
||||
i2c->msg_ptr = 0;
|
||||
i2c->msg_idx = 0;
|
||||
i2c->state = STATE_START;
|
||||
|
||||
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
||||
if (ret < 0) {
|
||||
dev_dbg(i2c->dev, "Address failed: (%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
timeout = wait_for_completion_timeout(&i2c->completion,
|
||||
msecs_to_jiffies(i2c->timeout_ms));
|
||||
if (timeout == 0) {
|
||||
dev_dbg(i2c->dev, "timeout\n");
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
ret = i2c->msg_idx;
|
||||
if (ret != num) {
|
||||
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
|
||||
return -EAGAIN;
|
||||
}
|
||||
|
||||
/* wait 2 clock periods to ensure the stop has been through the bus */
|
||||
udelay(DIV_ROUND_UP(2 * 1000, i2c->speed_khz));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct synquacer_i2c *i2c = dev_id;
|
||||
|
||||
unsigned char byte;
|
||||
unsigned char bsr, bcr;
|
||||
int ret;
|
||||
|
||||
bcr = readb(i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
bsr = readb(i2c->base + SYNQUACER_I2C_REG_BSR);
|
||||
dev_dbg(i2c->dev, "bsr:0x%02x, bcr:0x%02x\n", bsr, bcr);
|
||||
|
||||
if (bcr & SYNQUACER_I2C_BCR_BER) {
|
||||
dev_err(i2c->dev, "bus error\n");
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
goto out;
|
||||
}
|
||||
if ((bsr & SYNQUACER_I2C_BSR_AL) ||
|
||||
!(bcr & SYNQUACER_I2C_BCR_MSS)) {
|
||||
dev_dbg(i2c->dev, "arbitration lost\n");
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
goto out;
|
||||
}
|
||||
|
||||
switch (i2c->state) {
|
||||
case STATE_START:
|
||||
if (bsr & SYNQUACER_I2C_BSR_LRB) {
|
||||
dev_dbg(i2c->dev, "ack was not received\n");
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (i2c->msg->flags & I2C_M_RD)
|
||||
i2c->state = STATE_READ;
|
||||
else
|
||||
i2c->state = STATE_WRITE;
|
||||
|
||||
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
|
||||
synquacer_i2c_stop(i2c, 0);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (i2c->state == STATE_READ)
|
||||
goto prepare_read;
|
||||
|
||||
/* fallthru */
|
||||
|
||||
case STATE_WRITE:
|
||||
if (bsr & SYNQUACER_I2C_BSR_LRB) {
|
||||
dev_dbg(i2c->dev, "WRITE: No Ack\n");
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (!is_msgend(i2c)) {
|
||||
writeb(i2c->msg->buf[i2c->msg_ptr++],
|
||||
i2c->base + SYNQUACER_I2C_REG_DAR);
|
||||
|
||||
/* clear IRQ, and continue */
|
||||
writeb(SYNQUACER_I2C_BCR_BEIE |
|
||||
SYNQUACER_I2C_BCR_MSS |
|
||||
SYNQUACER_I2C_BCR_INTE,
|
||||
i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
break;
|
||||
}
|
||||
if (is_lastmsg(i2c)) {
|
||||
synquacer_i2c_stop(i2c, 0);
|
||||
break;
|
||||
}
|
||||
dev_dbg(i2c->dev, "WRITE: Next Message\n");
|
||||
|
||||
i2c->msg_ptr = 0;
|
||||
i2c->msg_idx++;
|
||||
i2c->msg++;
|
||||
|
||||
/* send the new start */
|
||||
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
||||
if (ret < 0) {
|
||||
dev_dbg(i2c->dev, "restart error (%d)\n", ret);
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
break;
|
||||
}
|
||||
i2c->state = STATE_START;
|
||||
break;
|
||||
|
||||
case STATE_READ:
|
||||
byte = readb(i2c->base + SYNQUACER_I2C_REG_DAR);
|
||||
if (!(bsr & SYNQUACER_I2C_BSR_FBT)) /* data */
|
||||
i2c->msg->buf[i2c->msg_ptr++] = byte;
|
||||
else /* address */
|
||||
dev_dbg(i2c->dev, "address:0x%02x. ignore it.\n", byte);
|
||||
|
||||
prepare_read:
|
||||
if (is_msglast(i2c)) {
|
||||
writeb(SYNQUACER_I2C_BCR_MSS |
|
||||
SYNQUACER_I2C_BCR_BEIE |
|
||||
SYNQUACER_I2C_BCR_INTE,
|
||||
i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
break;
|
||||
}
|
||||
if (!is_msgend(i2c)) {
|
||||
writeb(SYNQUACER_I2C_BCR_MSS |
|
||||
SYNQUACER_I2C_BCR_BEIE |
|
||||
SYNQUACER_I2C_BCR_INTE |
|
||||
SYNQUACER_I2C_BCR_ACK,
|
||||
i2c->base + SYNQUACER_I2C_REG_BCR);
|
||||
break;
|
||||
}
|
||||
if (is_lastmsg(i2c)) {
|
||||
/* last message, send stop and complete */
|
||||
dev_dbg(i2c->dev, "READ: Send Stop\n");
|
||||
synquacer_i2c_stop(i2c, 0);
|
||||
break;
|
||||
}
|
||||
dev_dbg(i2c->dev, "READ: Next Transfer\n");
|
||||
|
||||
i2c->msg_ptr = 0;
|
||||
i2c->msg_idx++;
|
||||
i2c->msg++;
|
||||
|
||||
ret = synquacer_i2c_master_start(i2c, i2c->msg);
|
||||
if (ret < 0) {
|
||||
dev_dbg(i2c->dev, "restart error (%d)\n", ret);
|
||||
synquacer_i2c_stop(i2c, -EAGAIN);
|
||||
} else {
|
||||
i2c->state = STATE_START;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
dev_err(i2c->dev, "called in err STATE (%d)\n", i2c->state);
|
||||
break;
|
||||
}
|
||||
|
||||
out:
|
||||
WAIT_PCLK(10, i2c->pclkrate);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int synquacer_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct synquacer_i2c *i2c;
|
||||
int retry;
|
||||
int ret;
|
||||
|
||||
i2c = i2c_get_adapdata(adap);
|
||||
i2c->timeout_ms = calc_timeout_ms(i2c, msgs, num);
|
||||
|
||||
dev_dbg(i2c->dev, "calculated timeout %d ms\n", i2c->timeout_ms);
|
||||
|
||||
for (retry = 0; retry < adap->retries; retry++) {
|
||||
ret = synquacer_i2c_doxfer(i2c, msgs, num);
|
||||
if (ret != -EAGAIN)
|
||||
return ret;
|
||||
|
||||
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
|
||||
|
||||
synquacer_i2c_hw_reset(i2c);
|
||||
}
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static u32 synquacer_i2c_functionality(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm synquacer_i2c_algo = {
|
||||
.master_xfer = synquacer_i2c_xfer,
|
||||
.functionality = synquacer_i2c_functionality,
|
||||
};
|
||||
|
||||
static struct i2c_adapter synquacer_i2c_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "synquacer_i2c-adapter",
|
||||
.algo = &synquacer_i2c_algo,
|
||||
.retries = 5,
|
||||
};
|
||||
|
||||
static int synquacer_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct synquacer_i2c *i2c;
|
||||
struct resource *r;
|
||||
u32 bus_speed;
|
||||
int ret;
|
||||
|
||||
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
|
||||
if (!i2c)
|
||||
return -ENOMEM;
|
||||
|
||||
bus_speed = i2c_acpi_find_bus_speed(&pdev->dev);
|
||||
if (!bus_speed)
|
||||
device_property_read_u32(&pdev->dev, "clock-frequency",
|
||||
&bus_speed);
|
||||
|
||||
device_property_read_u32(&pdev->dev, "socionext,pclk-rate",
|
||||
&i2c->pclkrate);
|
||||
|
||||
i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
|
||||
if (IS_ERR(i2c->pclk) && PTR_ERR(i2c->pclk) == -EPROBE_DEFER)
|
||||
return -EPROBE_DEFER;
|
||||
if (!IS_ERR_OR_NULL(i2c->pclk)) {
|
||||
dev_dbg(&pdev->dev, "clock source %p\n", i2c->pclk);
|
||||
|
||||
ret = clk_prepare_enable(i2c->pclk);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to enable clock (%d)\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
i2c->pclkrate = clk_get_rate(i2c->pclk);
|
||||
}
|
||||
|
||||
if (i2c->pclkrate < SYNQUACER_I2C_MIN_CLK_RATE ||
|
||||
i2c->pclkrate > SYNQUACER_I2C_MAX_CLK_RATE) {
|
||||
dev_err(&pdev->dev, "PCLK missing or out of range (%d)\n",
|
||||
i2c->pclkrate);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
i2c->base = devm_ioremap_resource(&pdev->dev, r);
|
||||
if (IS_ERR(i2c->base))
|
||||
return PTR_ERR(i2c->base);
|
||||
|
||||
i2c->irq = platform_get_irq(pdev, 0);
|
||||
if (i2c->irq < 0) {
|
||||
dev_err(&pdev->dev, "no IRQ resource found\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ret = devm_request_irq(&pdev->dev, i2c->irq, synquacer_i2c_isr,
|
||||
0, dev_name(&pdev->dev), i2c);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
|
||||
return ret;
|
||||
}
|
||||
|
||||
i2c->state = STATE_IDLE;
|
||||
i2c->dev = &pdev->dev;
|
||||
i2c->adapter = synquacer_i2c_ops;
|
||||
i2c_set_adapdata(&i2c->adapter, i2c);
|
||||
i2c->adapter.dev.parent = &pdev->dev;
|
||||
i2c->adapter.nr = pdev->id;
|
||||
init_completion(&i2c->completion);
|
||||
|
||||
if (bus_speed < 400000)
|
||||
i2c->speed_khz = SYNQUACER_I2C_SPEED_SM;
|
||||
else
|
||||
i2c->speed_khz = SYNQUACER_I2C_SPEED_FM;
|
||||
|
||||
synquacer_i2c_hw_init(i2c);
|
||||
|
||||
ret = i2c_add_numbered_adapter(&i2c->adapter);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to add bus to i2c core\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
dev_info(&pdev->dev, "%s: synquacer_i2c adapter\n",
|
||||
dev_name(&i2c->adapter.dev));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int synquacer_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct synquacer_i2c *i2c = platform_get_drvdata(pdev);
|
||||
|
||||
i2c_del_adapter(&i2c->adapter);
|
||||
if (!IS_ERR(i2c->pclk))
|
||||
clk_disable_unprepare(i2c->pclk);
|
||||
|
||||
return 0;
|
||||
};
|
||||
|
||||
static const struct of_device_id synquacer_i2c_dt_ids[] = {
|
||||
{ .compatible = "socionext,synquacer-i2c" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids);
|
||||
|
||||
#ifdef CONFIG_ACPI
|
||||
static const struct acpi_device_id synquacer_i2c_acpi_ids[] = {
|
||||
{ "SCX0003" },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, synquacer_i2c_acpi_ids);
|
||||
#endif
|
||||
|
||||
static struct platform_driver synquacer_i2c_driver = {
|
||||
.probe = synquacer_i2c_probe,
|
||||
.remove = synquacer_i2c_remove,
|
||||
.driver = {
|
||||
.name = "synquacer_i2c",
|
||||
.of_match_table = of_match_ptr(synquacer_i2c_dt_ids),
|
||||
.acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids),
|
||||
},
|
||||
};
|
||||
module_platform_driver(synquacer_i2c_driver);
|
||||
|
||||
MODULE_AUTHOR("Fujitsu Semiconductor Ltd");
|
||||
MODULE_DESCRIPTION("Socionext SynQuacer I2C Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче