mmc: dw_mmc: k3: remove clk_table

Remove clk_table and directly use ios->clock as clock source rate.
Abstract init clock rate and max clock limitation in clk.c

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <chris@printf.net>
This commit is contained in:
Zhangfei Gao 2014-01-13 17:14:29 +08:00 коммит произвёл Chris Ball
Родитель 7cf347bd20
Коммит 0e662440e9
2 изменённых файлов: 2 добавлений и 53 удалений

Просмотреть файл

@ -14,18 +14,6 @@ Required Properties:
* compatible: should be one of the following.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions.
* clock-freq-table: should be the frequency (in Hz) array of the ciu clock
in each supported mode.
0. CIU clock rate in Hz for DS mode
1. CIU clock rate in Hz for MMC HS mode
2. CIU clock rate in Hz for SD HS mode
3. CIU clock rate in Hz for SDR12 mode
4. CIU clock rate in Hz for SDR25 mode
5. CIU clock rate in Hz for SDR50 mode
6. CIU clock rate in Hz for SDR104 mode
7. CIU clock rate in Hz for DDR50 mode
8. CIU clock rate in Hz for HS200 mode
Example:
/* for Hi3620 */
@ -39,8 +27,6 @@ Example:
#size-cells = <0>;
clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
clock-names = "ciu", "biu";
clock-freq-table =
<25000000 0 50000000 25000000 50000000 100000000 0 50000000>;
};
/* Board portion */

Просмотреть файл

@ -18,56 +18,19 @@
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
#define MAX_NUMS 10
struct dw_mci_k3_priv_data {
u32 clk_table[MAX_NUMS];
};
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
struct dw_mci_k3_priv_data *priv = host->priv;
u32 rate = priv->clk_table[ios->timing];
int ret;
if (!rate) {
dev_warn(host->dev,
"no specified rate in timing %u\n", ios->timing);
return;
}
ret = clk_set_rate(host->ciu_clk, rate);
ret = clk_set_rate(host->ciu_clk, ios->clock);
if (ret)
dev_warn(host->dev, "failed to set clock rate %uHz\n", rate);
dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
host->bus_hz = clk_get_rate(host->ciu_clk);
}
static int dw_mci_k3_parse_dt(struct dw_mci *host)
{
struct dw_mci_k3_priv_data *priv;
struct device_node *node = host->dev->of_node;
struct property *prop;
const __be32 *cur;
u32 val, num = 0;
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(host->dev, "mem alloc failed for private data\n");
return -ENOMEM;
}
host->priv = priv;
of_property_for_each_u32(node, "clock-freq-table", prop, cur, val) {
if (num >= MAX_NUMS)
break;
priv->clk_table[num++] = val;
}
return 0;
}
static const struct dw_mci_drv_data k3_drv_data = {
.set_ios = dw_mci_k3_set_ios,
.parse_dt = dw_mci_k3_parse_dt,
};
static const struct of_device_id dw_mci_k3_match[] = {