net/mlx5: E-Switch, Avoid setup attempt if not being e-switch manager

In smartnic env, the host (PF) driver might not be an e-switch
manager, hence the FW will err on driver attempts to deal with
setting/unsetting the eswitch and as a result the overall setup
of sriov will fail.

Fix that by avoiding the operation if e-switch management is not
allowed for this driver instance. While here, move to use the
correct name for the esw manager capability name.

Fixes: 81848731ff ('net/mlx5: E-Switch, Add SR-IOV (FDB) support')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Guy Kushnir <guyk@mellanox.com>
Reviewed-by: Eli Cohen <eli@melloanox.com>
Tested-by: Eli Cohen <eli@melloanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c

@@ -839,7 +839,7 @@ static bool mlx5e_is_vf_vport_rep(struct mlx5e_priv *priv)
 	struct mlx5e_rep_priv *rpriv = priv->ppriv;
 	struct mlx5_eswitch_rep *rep;
 
-	if (!MLX5_CAP_GEN(priv->mdev, eswitch_flow_table))
+	if (!MLX5_ESWITCH_MANAGER(priv->mdev))
 		return false;
 
 	rep = rpriv->rep;

drivers/net/ethernet/mellanox/mlx5/core/eswitch.c

@@ -1604,7 +1604,7 @@ int mlx5_eswitch_enable_sriov(struct mlx5_eswitch *esw, int nvfs, int mode)
 	if (!ESW_ALLOWED(esw))
 		return 0;
 
-	if (!MLX5_CAP_GEN(esw->dev, eswitch_flow_table) ||
+	if (!MLX5_ESWITCH_MANAGER(esw->dev) ||
 	    !MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, ft_support)) {
 		esw_warn(esw->dev, "E-Switch FDB is not supported, aborting ...\n");
 		return -EOPNOTSUPP;

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

@@ -32,6 +32,7 @@
 
 #include <linux/mutex.h>
 #include <linux/mlx5/driver.h>
+#include <linux/mlx5/eswitch.h>
 
 #include "mlx5_core.h"
 #include "fs_core.h"
@@ -2652,7 +2653,7 @@ int mlx5_init_fs(struct mlx5_core_dev *dev)
 			goto err;
 	}
 
-	if (MLX5_CAP_GEN(dev, eswitch_flow_table)) {
+	if (MLX5_ESWITCH_MANAGER(dev)) {
 		if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) {
 			err = init_fdb_root_ns(steering);
 			if (err)

drivers/net/ethernet/mellanox/mlx5/core/fw.c

@@ -32,6 +32,7 @@
 
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/cmd.h>
+#include <linux/mlx5/eswitch.h>
 #include <linux/module.h>
 #include "mlx5_core.h"
 #include "../../mlxfw/mlxfw.h"
@@ -159,13 +160,13 @@ int mlx5_query_hca_caps(struct mlx5_core_dev *dev)
 	}
 
 	if (MLX5_CAP_GEN(dev, vport_group_manager) &&
-	    MLX5_CAP_GEN(dev, eswitch_flow_table)) {
+	    MLX5_ESWITCH_MANAGER(dev)) {
 		err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH_FLOW_TABLE);
 		if (err)
 			return err;
 	}
 
-	if (MLX5_CAP_GEN(dev, eswitch_flow_table)) {
+	if (MLX5_ESWITCH_MANAGER(dev)) {
 		err = mlx5_core_get_caps(dev, MLX5_CAP_ESWITCH);
 		if (err)
 			return err;

drivers/net/ethernet/mellanox/mlx5/core/sriov.c

@@ -88,6 +88,9 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs)
 		return -EBUSY;
 	}
 
+	if (!MLX5_ESWITCH_MANAGER(dev))
+		goto enable_vfs_hca;
+
 	err = mlx5_eswitch_enable_sriov(dev->priv.eswitch, num_vfs, SRIOV_LEGACY);
 	if (err) {
 		mlx5_core_warn(dev,
@@ -95,6 +98,7 @@ static int mlx5_device_enable_sriov(struct mlx5_core_dev *dev, int num_vfs)
 		return err;
 	}
 
+enable_vfs_hca:
 	for (vf = 0; vf < num_vfs; vf++) {
 		err = mlx5_core_enable_hca(dev, vf + 1);
 		if (err) {
@@ -140,7 +144,8 @@ static void mlx5_device_disable_sriov(struct mlx5_core_dev *dev)
 	}
 
 out:
-	mlx5_eswitch_disable_sriov(dev->priv.eswitch);
+	if (MLX5_ESWITCH_MANAGER(dev))
+		mlx5_eswitch_disable_sriov(dev->priv.eswitch);
 
 	if (mlx5_wait_for_vf_pages(dev))
 		mlx5_core_warn(dev, "timeout reclaiming VFs pages\n");

include/linux/mlx5/eswitch.h

@@ -8,6 +8,8 @@
 
 #include <linux/mlx5/driver.h>
 
+#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager)
+
 enum {
 	SRIOV_NONE,
 	SRIOV_LEGACY,

include/linux/mlx5/mlx5_ifc.h

@@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits {
 	u8         vnic_env_queue_counters[0x1];
 	u8         ets[0x1];
 	u8         nic_flow_table[0x1];
-	u8         eswitch_flow_table[0x1];
+	u8         eswitch_manager[0x1];
 	u8         device_memory[0x1];
 	u8         mcam_reg[0x1];
 	u8         pcam_reg[0x1];