power: supply: sbs-battery: Add TI BQ20Z65 support

Add support for BQ20Z65 manufacturer data to the sbs-battery
driver. Implementation has been verified using the public TRM
available from [0] and tested using a GE Flex 3S2P battery.

[0] http://www.ti.com/lit/pdf/sluu386

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
Sebastian Reichel 2020-05-13 20:56:01 +02:00 коммит произвёл Sebastian Reichel
Родитель 601c2a543f
Коммит 0ff969158a
2 изменённых файлов: 11 добавлений и 5 удалений

Просмотреть файл

@ -6,6 +6,7 @@ Required properties :
part number compatible string might be used in order to take care of
vendor specific registers.
Known <vendor>,<part-number>:
ti,bq20z65
ti,bq20z75
Optional properties :

Просмотреть файл

@ -149,8 +149,8 @@ static enum power_supply_property sbs_properties[] = {
POWER_SUPPLY_PROP_MODEL_NAME
};
/* Supports special manufacturer commands from TI BQ20Z75 IC. */
#define SBS_FLAGS_TI_BQ20Z75 BIT(0)
/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
#define SBS_FLAGS_TI_BQ20ZX5 BIT(0)
struct sbs_info {
struct i2c_client *client;
@ -626,7 +626,7 @@ static int sbs_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_HEALTH:
if (chip->flags & SBS_FLAGS_TI_BQ20Z75)
if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
ret = sbs_get_ti_battery_presence_and_health(client,
psp, val);
else
@ -950,7 +950,7 @@ static int sbs_suspend(struct device *dev)
if (chip->poll_time > 0)
cancel_delayed_work_sync(&chip->work);
if (chip->flags & SBS_FLAGS_TI_BQ20Z75) {
if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
/* Write to manufacturer access with sleep command. */
ret = sbs_write_word_data(client,
sbs_data[REG_MANUFACTURER_DATA].addr,
@ -970,6 +970,7 @@ static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
#endif
static const struct i2c_device_id sbs_id[] = {
{ "bq20z65", 0 },
{ "bq20z75", 0 },
{ "sbs-battery", 1 },
{}
@ -978,9 +979,13 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
static const struct of_device_id sbs_dt_ids[] = {
{ .compatible = "sbs,sbs-battery" },
{
.compatible = "ti,bq20z65",
.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
},
{
.compatible = "ti,bq20z75",
.data = (void *)SBS_FLAGS_TI_BQ20Z75,
.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
},
{ }
};