arm64: dts: msm8996: Add device node for qcom qmp-phy for pcie

Add required device node for QMP phy based 3-lane PCIe phy
present on msm8996 chipset to enable support for the same.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -89,6 +89,10 @@
 			status = "okay";
 		};
 
+		phy@34000 {
+			status = "okay";
+		};
+
 		phy@7410000 {
 			status = "okay";
 		};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -556,6 +556,68 @@
 			};
 		};
 
+		phy@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x34000 0x488>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			vdda-phy-supply = <&pm8994_l28>;
+			vdda-pll-supply = <&pm8994_l12>;
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+			status = "disabled";
+
+			pciephy_0: lane@35000 {
+				reg = <0x035000 0x130>,
+					<0x035200 0x200>,
+					<0x035400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_0_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+			};
+
+			pciephy_1: lane@36000 {
+				reg = <0x036000 0x130>,
+					<0x036200 0x200>,
+					<0x036400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_1_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+			};
+
+			pciephy_2: lane@37000 {
+				reg = <0x037000 0x130>,
+					<0x037200 0x200>,
+					<0x037400 0x1dc>;
+				#phy-cells = <0>;
+
+				clock-output-names = "pcie_2_pipe_clk_src";
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+			};
+		};
+
 		phy@7410000 {
 			compatible = "qcom,msm8996-qmp-usb3-phy";
 			reg = <0x7410000 0x1c4>;