powerpc/5121: add initial support for PDM360NG board
Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer <markus.fischer.ec@ifm.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Anatolij Gustschin
Grant Likely
Родитель
1044ea8cfd
Коммит
12fb0eb4c9
|
|
@ -0,0 +1,410 @@
|
|||
/*
|
||||
* Device Tree Source for IFM PDM360NG.
|
||||
*
|
||||
* Copyright 2009 - 2010 DENX Software Engineering.
|
||||
* Anatolij Gustschin <agust@denx.de>
|
||||
*
|
||||
* Based on MPC5121E ADS dts.
|
||||
* Copyright 2008 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
model = "pdm360ng";
|
||||
compatible = "ifm,pdm360ng";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&ipic>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = ð0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,5121@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
d-cache-line-size = <0x20>; // 32 bytes
|
||||
i-cache-line-size = <0x20>; // 32 bytes
|
||||
d-cache-size = <0x8000>; // L1, 32K
|
||||
i-cache-size = <0x8000>; // L1, 32K
|
||||
timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
|
||||
bus-frequency = <198000000>; // 198 MHz csb bus
|
||||
clock-frequency = <396000000>; // 396 MHz ppc core
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; // 512MB at 0
|
||||
};
|
||||
|
||||
nfc@40000000 {
|
||||
compatible = "fsl,mpc5121-nfc";
|
||||
reg = <0x40000000 0x100000>;
|
||||
interrupts = <0x6 0x8>;
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
bank-width = <0x1>;
|
||||
chips = <0x1>;
|
||||
|
||||
partition@0 {
|
||||
label = "nand0";
|
||||
reg = <0x0 0x40000000>;
|
||||
};
|
||||
};
|
||||
|
||||
sram@50000000 {
|
||||
compatible = "fsl,mpc5121-sram";
|
||||
reg = <0x50000000 0x20000>; // 128K at 0x50000000
|
||||
};
|
||||
|
||||
localbus@80000020 {
|
||||
compatible = "fsl,mpc5121-localbus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x80000020 0x40>;
|
||||
|
||||
ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */
|
||||
0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
|
||||
|
||||
flash@0,0 {
|
||||
compatible = "amd,s29gl01gp", "cfi-flash";
|
||||
reg = <0 0x00000000 0x08000000
|
||||
0 0x08000000 0x08000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
bank-width = <4>;
|
||||
device-width = <2>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x00000000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition@80000 {
|
||||
label = "environment";
|
||||
reg = <0x00080000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition@100000 {
|
||||
label = "splash-image";
|
||||
reg = <0x00100000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
partition@180000 {
|
||||
label = "device-tree";
|
||||
reg = <0x00180000 0x00040000>;
|
||||
};
|
||||
partition@1c0000 {
|
||||
label = "kernel";
|
||||
reg = <0x001c0000 0x00500000>;
|
||||
};
|
||||
partition@6c0000 {
|
||||
label = "filesystem";
|
||||
reg = <0x006c0000 0x07940000>;
|
||||
};
|
||||
};
|
||||
|
||||
mram0@2,0 {
|
||||
compatible = "mtd-ram";
|
||||
reg = <2 0x00000 0x10000>;
|
||||
bank-width = <2>;
|
||||
};
|
||||
|
||||
mram1@2,10000 {
|
||||
compatible = "mtd-ram";
|
||||
reg = <2 0x010000 0x10000>;
|
||||
bank-width = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
soc@80000000 {
|
||||
compatible = "fsl,mpc5121-immr";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#interrupt-cells = <2>;
|
||||
ranges = <0x0 0x80000000 0x400000>;
|
||||
reg = <0x80000000 0x400000>;
|
||||
bus-frequency = <66000000>; // 66 MHz ips bus
|
||||
|
||||
// IPIC
|
||||
// interrupts cell = <intr #, sense>
|
||||
// sense values match linux IORESOURCE_IRQ_* defines:
|
||||
// sense == 8: Level, low assertion
|
||||
// sense == 2: Edge, high-to-low change
|
||||
//
|
||||
ipic: interrupt-controller@c00 {
|
||||
compatible = "fsl,mpc5121-ipic", "fsl,ipic";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0xc00 0x100>;
|
||||
};
|
||||
|
||||
rtc@a00 { // Real time clock
|
||||
compatible = "fsl,mpc5121-rtc";
|
||||
reg = <0xa00 0x100>;
|
||||
interrupts = <79 0x8 80 0x8>;
|
||||
};
|
||||
|
||||
reset@e00 { // Reset module
|
||||
compatible = "fsl,mpc5121-reset";
|
||||
reg = <0xe00 0x100>;
|
||||
};
|
||||
|
||||
clock@f00 { // Clock control
|
||||
compatible = "fsl,mpc5121-clock";
|
||||
reg = <0xf00 0x100>;
|
||||
};
|
||||
|
||||
pmc@1000{ //Power Management Controller
|
||||
compatible = "fsl,mpc5121-pmc";
|
||||
reg = <0x1000 0x100>;
|
||||
interrupts = <83 0x2>;
|
||||
};
|
||||
|
||||
gpio@1100 {
|
||||
compatible = "fsl,mpc5121-gpio";
|
||||
reg = <0x1100 0x100>;
|
||||
interrupts = <78 0x8>;
|
||||
};
|
||||
|
||||
can@1300 {
|
||||
compatible = "fsl,mpc5121-mscan";
|
||||
interrupts = <12 0x8>;
|
||||
reg = <0x1300 0x80>;
|
||||
};
|
||||
|
||||
can@1380 {
|
||||
compatible = "fsl,mpc5121-mscan";
|
||||
interrupts = <13 0x8>;
|
||||
reg = <0x1380 0x80>;
|
||||
};
|
||||
|
||||
i2c@1700 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5121-i2c";
|
||||
reg = <0x1700 0x20>;
|
||||
interrupts = <0x9 0x8>;
|
||||
fsl,preserve-clocking;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "at,24c01";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "stm,m41t00";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1740 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc5121-i2c";
|
||||
reg = <0x1740 0x20>;
|
||||
interrupts = <0xb 0x8>;
|
||||
fsl,preserve-clocking;
|
||||
};
|
||||
|
||||
i2ccontrol@1760 {
|
||||
compatible = "fsl,mpc5121-i2c-ctrl";
|
||||
reg = <0x1760 0x8>;
|
||||
};
|
||||
|
||||
axe@2000 {
|
||||
compatible = "fsl,mpc5121-axe";
|
||||
reg = <0x2000 0x100>;
|
||||
interrupts = <42 0x8>;
|
||||
};
|
||||
|
||||
display@2100 {
|
||||
compatible = "fsl,mpc5121-diu";
|
||||
reg = <0x2100 0x100>;
|
||||
interrupts = <64 0x8>;
|
||||
};
|
||||
|
||||
can@2300 {
|
||||
compatible = "fsl,mpc5121-mscan";
|
||||
interrupts = <90 0x8>;
|
||||
reg = <0x2300 0x80>;
|
||||
};
|
||||
|
||||
can@2380 {
|
||||
compatible = "fsl,mpc5121-mscan";
|
||||
interrupts = <91 0x8>;
|
||||
reg = <0x2380 0x80>;
|
||||
};
|
||||
|
||||
viu@2400 {
|
||||
compatible = "fsl,mpc5121-viu";
|
||||
reg = <0x2400 0x400>;
|
||||
interrupts = <67 0x8>;
|
||||
};
|
||||
|
||||
mdio@2800 {
|
||||
compatible = "fsl,mpc5121-fec-mdio";
|
||||
reg = <0x2800 0x200>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
phy: ethernet-phy@0 {
|
||||
compatible = "smsc,lan8700";
|
||||
reg = <0x1f>;
|
||||
};
|
||||
};
|
||||
|
||||
eth0: ethernet@2800 {
|
||||
compatible = "fsl,mpc5121-fec";
|
||||
reg = <0x2800 0x200>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <4 0x8>;
|
||||
phy-handle = < &phy >;
|
||||
};
|
||||
|
||||
// USB1 using external ULPI PHY
|
||||
usb@3000 {
|
||||
compatible = "fsl,mpc5121-usb2-dr";
|
||||
reg = <0x3000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <43 0x8>;
|
||||
dr_mode = "host";
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
// USB0 using internal UTMI PHY
|
||||
usb@4000 {
|
||||
compatible = "fsl,mpc5121-usb2-dr";
|
||||
reg = <0x4000 0x600>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <44 0x8>;
|
||||
dr_mode = "otg";
|
||||
phy_type = "utmi_wide";
|
||||
fsl,invert-pwr-fault;
|
||||
};
|
||||
|
||||
// IO control
|
||||
ioctl@a000 {
|
||||
compatible = "fsl,mpc5121-ioctl";
|
||||
reg = <0xA000 0x1000>;
|
||||
};
|
||||
|
||||
// 512x PSCs are not 52xx PSCs compatible
|
||||
serial@11000 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <0>;
|
||||
reg = <0x11000 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11100 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <1>;
|
||||
reg = <0x11100 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11200 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <2>;
|
||||
reg = <0x11200 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11300 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <3>;
|
||||
reg = <0x11300 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11400 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <4>;
|
||||
reg = <0x11400 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11600 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <6>;
|
||||
reg = <0x11600 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11800 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <8>;
|
||||
reg = <0x11800 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
serial@11B00 {
|
||||
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
||||
cell-index = <11>;
|
||||
reg = <0x11B00 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
};
|
||||
|
||||
pscfifo@11f00 {
|
||||
compatible = "fsl,mpc5121-psc-fifo";
|
||||
reg = <0x11f00 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
};
|
||||
|
||||
spi@11900 {
|
||||
compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
|
||||
cell-index = <9>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x11900 0x100>;
|
||||
interrupts = <40 0x8>;
|
||||
fsl,rx-fifo-size = <16>;
|
||||
fsl,tx-fifo-size = <16>;
|
||||
|
||||
// 7845 touch screen controller
|
||||
ts@0 {
|
||||
compatible = "ti,ads7846";
|
||||
reg = <0x0>;
|
||||
spi-max-frequency = <3000000>;
|
||||
// pen irq is GPIO25
|
||||
interrupts = <78 0x8>;
|
||||
};
|
||||
};
|
||||
|
||||
dma@14000 {
|
||||
compatible = "fsl,mpc5121-dma";
|
||||
reg = <0x14000 0x1800>;
|
||||
interrupts = <65 0x8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -25,3 +25,10 @@ config MPC5121_GENERIC
|
|||
|
||||
Compatible boards include: Protonic LVT base boards (ZANMCU
|
||||
and VICVT2).
|
||||
|
||||
config PDM360NG
|
||||
bool "ifm PDM360NG board"
|
||||
depends on PPC_MPC512x
|
||||
select DEFAULT_UIMAGE
|
||||
help
|
||||
This option enables support for the PDM360NG board.
|
||||
|
|
|
|||
|
|
@ -4,3 +4,4 @@
|
|||
obj-y += clock.o mpc512x_shared.o
|
||||
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
|
||||
obj-$(CONFIG_MPC5121_GENERIC) += mpc5121_generic.o
|
||||
obj-$(CONFIG_PDM360NG) += pdm360ng.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,129 @@
|
|||
/*
|
||||
* Copyright (C) 2010 DENX Software Engineering
|
||||
*
|
||||
* Anatolij Gustschin, <agust@denx.de>
|
||||
*
|
||||
* PDM360NG board setup
|
||||
*
|
||||
* This is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/ipic.h>
|
||||
|
||||
#include "mpc512x.h"
|
||||
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
|
||||
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/spi/ads7846.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/notifier.h>
|
||||
|
||||
static void *pdm360ng_gpio_base;
|
||||
|
||||
static int pdm360ng_get_pendown_state(void)
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
reg = in_be32(pdm360ng_gpio_base + 0xc);
|
||||
if (reg & 0x40)
|
||||
setbits32(pdm360ng_gpio_base + 0xc, 0x40);
|
||||
|
||||
reg = in_be32(pdm360ng_gpio_base + 0x8);
|
||||
|
||||
/* return 1 if pen is down */
|
||||
return (reg & 0x40) == 0;
|
||||
}
|
||||
|
||||
static struct ads7846_platform_data pdm360ng_ads7846_pdata = {
|
||||
.model = 7845,
|
||||
.get_pendown_state = pdm360ng_get_pendown_state,
|
||||
.irq_flags = IRQF_TRIGGER_LOW,
|
||||
};
|
||||
|
||||
static int __init pdm360ng_penirq_init(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio");
|
||||
if (!np) {
|
||||
pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
pdm360ng_gpio_base = of_iomap(np, 0);
|
||||
of_node_put(np);
|
||||
if (!pdm360ng_gpio_base) {
|
||||
pr_err("%s: Can't map gpio regs.\n", __func__);
|
||||
return -ENODEV;
|
||||
}
|
||||
out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff);
|
||||
setbits32(pdm360ng_gpio_base + 0x18, 0x2000);
|
||||
setbits32(pdm360ng_gpio_base + 0x10, 0x40);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb,
|
||||
unsigned long event, void *__dev)
|
||||
{
|
||||
struct device *dev = __dev;
|
||||
|
||||
if ((event == BUS_NOTIFY_ADD_DEVICE) &&
|
||||
of_device_is_compatible(dev->of_node, "ti,ads7846")) {
|
||||
dev->platform_data = &pdm360ng_ads7846_pdata;
|
||||
return NOTIFY_OK;
|
||||
}
|
||||
return NOTIFY_DONE;
|
||||
}
|
||||
|
||||
static struct notifier_block pdm360ng_touchscreen_nb = {
|
||||
.notifier_call = pdm360ng_touchscreen_notifier_call,
|
||||
};
|
||||
|
||||
static void __init pdm360ng_touchscreen_init(void)
|
||||
{
|
||||
if (pdm360ng_penirq_init())
|
||||
return;
|
||||
|
||||
bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb);
|
||||
}
|
||||
#else
|
||||
static inline void __init pdm360ng_touchscreen_init(void)
|
||||
{
|
||||
}
|
||||
#endif /* CONFIG_TOUCHSCREEN_ADS7846 */
|
||||
|
||||
void __init pdm360ng_init(void)
|
||||
{
|
||||
mpc512x_init();
|
||||
pdm360ng_touchscreen_init();
|
||||
}
|
||||
|
||||
static int __init pdm360ng_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
return of_flat_dt_is_compatible(root, "ifm,pdm360ng");
|
||||
}
|
||||
|
||||
define_machine(pdm360ng) {
|
||||
.name = "PDM360NG",
|
||||
.probe = pdm360ng_probe,
|
||||
.setup_arch = mpc512x_setup_diu,
|
||||
.init = pdm360ng_init,
|
||||
.init_early = mpc512x_init_diu,
|
||||
.init_IRQ = mpc512x_init_IRQ,
|
||||
.get_irq = ipic_get_irq,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.restart = mpc512x_restart,
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче