Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
  ixgbe: Allow Priority Flow Control settings to survive a device reset
  net: core: remove unneeded include in net/core/utils.c.
  e1000e: update version number
  e1000e: fix close interrupt race
  e1000e: fix loss of multicast packets
  e1000e: commonize tx cleanup routine to match e1000 & igb
  netfilter: fix nf_logger name in ebt_ulog.
  netfilter: fix warning in ebt_ulog init function.
  netfilter: fix warning about invalid const usage
  e1000: fix close race with interrupt
  e1000: cleanup clean_tx_irq routine so that it completely cleans ring
  e1000: fix tx hang detect logic and address dma mapping issues
  bridge: bad error handling when adding invalid ether address
  bonding: select current active slave when enslaving device for mode tlb and alb
  gianfar: reallocate skb when headroom is not enough for fcb
  Bump release date to 25Mar2009 and version to 0.22
  r6040: Fix second PHY address
  qeth: fix wait_event_timeout handling
  qeth: check for completion of a running recovery
  qeth: unregister MAC addresses during recovery.
  ...

Manually fixed up conflicts in:
	drivers/infiniband/hw/cxgb3/cxio_hal.h
	drivers/infiniband/hw/nes/nes_nic.c

Documentation/DocBook/mac80211.tmpl

@@ -17,8 +17,7 @@
     </authorgroup>
 
     <copyright>
-      <year>2007</year>
+      <year>2007-2009</year>
-      <year>2008</year>
       <holder>Johannes Berg</holder>
     </copyright>
 
@@ -165,8 +164,8 @@ usage should require reading the full document.
 !Pinclude/net/mac80211.h Frame format
       </sect1>
       <sect1>
-        <title>Alignment issues</title>
+        <title>Packet alignment</title>
-        <para>TBD</para>
+!Pnet/mac80211/rx.c Packet alignment
       </sect1>
       <sect1>
         <title>Calling into mac80211 from interrupts</title>
@@ -223,6 +222,11 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_key_flags
     </chapter>
 
+    <chapter id="powersave">
+      <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+    </chapter>
+
     <chapter id="qos">
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>

Documentation/feature-removal-schedule.txt

@@ -229,7 +229,9 @@ Who:	Jan Engelhardt <jengelh@computergmbh.de>
 ---------------------------
 
 What:	b43 support for firmware revision < 410
-When:	July 2008
+When:	The schedule was July 2008, but it was decided that we are going to keep the
+        code as long as there are no major maintanance headaches.
+	So it _could_ be removed _any_ time now, if it conflicts with something new.
 Why:	The support code for the old firmware hurts code readability/maintainability
 	and slightly hurts runtime performance. Bugfixes for the old firmware
 	are not provided by Broadcom anymore.

Documentation/networking/dccp.txt

@@ -141,7 +141,8 @@ rx_ccid = 2
 	Default CCID for the receiver-sender half-connection; see tx_ccid.
 
 seq_window = 100
-	The initial sequence window (sec. 7.5.2).
+	The initial sequence window (sec. 7.5.2) of the sender. This influences
+	the local ackno validity and the remote seqno validity windows (7.5.1).
 
 tx_qlen = 5
 	The size of the transmit buffer in packets. A value of 0 corresponds

Documentation/networking/ip-sysctl.txt

@@ -625,11 +625,11 @@ log_martians - BOOLEAN
 accept_redirects - BOOLEAN
 	Accept ICMP redirect messages.
 	accept_redirects for the interface will be enabled if:
-	- both conf/{all,interface}/accept_redirects are TRUE in the case forwarding
+	- both conf/{all,interface}/accept_redirects are TRUE in the case
-	  for the interface is enabled
+	  forwarding for the interface is enabled
 	or
-	- at least one of conf/{all,interface}/accept_redirects is TRUE in the case
+	- at least one of conf/{all,interface}/accept_redirects is TRUE in the
-	  forwarding for the interface is disabled
+	  case forwarding for the interface is disabled
 	accept_redirects for the interface will be disabled otherwise
 	default TRUE (host)
 		FALSE (router)
@@ -640,8 +640,8 @@ forwarding - BOOLEAN
 mc_forwarding - BOOLEAN
 	Do multicast routing. The kernel needs to be compiled with CONFIG_MROUTE
 	and a multicast routing daemon is required.
-	conf/all/mc_forwarding must also be set to TRUE to enable multicast routing
+	conf/all/mc_forwarding must also be set to TRUE to enable multicast
-	for the interface
+	routing	for the interface
 
 medium_id - INTEGER
 	Integer value used to differentiate the devices by the medium they
@@ -699,16 +699,22 @@ accept_source_route - BOOLEAN
 	default TRUE (router)
 		FALSE (host)
 
-rp_filter - BOOLEAN
+rp_filter - INTEGER
-	1 - do source validation by reversed path, as specified in RFC1812
-	    Recommended option for single homed hosts and stub network
-	    routers. Could cause troubles for complicated (not loop free)
-	    networks running a slow unreliable protocol (sort of RIP),
-	    or using static routes.
-
 	0 - No source validation.
+	1 - Strict mode as defined in RFC3704 Strict Reverse Path
+	    Each incoming packet is tested against the FIB and if the interface
+	    is not the best reverse path the packet check will fail.
+	    By default failed packets are discarded.
+	2 - Loose mode as defined in RFC3704 Loose Reverse Path
+	    Each incoming packet's source address is also tested against the FIB
+	    and if the source address is not reachable via any interface
+	    the packet check will fail.
 
-	conf/all/rp_filter must also be set to TRUE to do source validation
+	Current recommended practice in RFC3704 is to enable strict mode
+	to prevent IP spoofing from DDos attacks. If using asymmetric routing
+	or other complicated routing, then loose mode is recommended.
+
+	conf/all/rp_filter must also be set to non-zero to do source validation
 	on the interface
 
 	Default value is 0. Note that some distributions enable it
@@ -782,6 +788,12 @@ arp_ignore - INTEGER
 	The max value from conf/{all,interface}/arp_ignore is used
 	when ARP request is received on the {interface}
 
+arp_notify - BOOLEAN
+	Define mode for notification of address and device changes.
+	0 - (default): do nothing
+	1 - Generate gratuitous arp replies when device is brought up
+	    or hardware address changes.
+
 arp_accept - BOOLEAN
 	Define behavior when gratuitous arp replies are received:
 	0 - drop gratuitous arp frames
@@ -1031,7 +1043,9 @@ max_addresses - INTEGER
 	Default: 16
 
 disable_ipv6 - BOOLEAN
-	Disable IPv6 operation.
+	Disable IPv6 operation.  If accept_dad is set to 2, this value
+	will be dynamically set to TRUE if DAD fails for the link-local
+	address.
 	Default: FALSE (enable IPv6 operation)
 
 accept_dad - INTEGER

Documentation/networking/ixgbe.txt

@@ -0,0 +1,199 @@
+Linux Base Driver for 10 Gigabit PCI Express Intel(R) Network Connection
+========================================================================
+
+March 10, 2009
+
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Building and Installation
+- Additional Configurations
+- Support
+
+
+
+In This Release
+===============
+
+This file describes the ixgbe Linux Base Driver for the 10 Gigabit PCI
+Express Intel(R) Network Connection.  This driver includes support for
+Itanium(R)2-based systems.
+
+For questions related to hardware requirements, refer to the documentation
+supplied with your 10 Gigabit adapter.  All hardware requirements listed apply
+to use with Linux.
+
+The following features are available in this kernel:
+ - Native VLANs
+ - Channel Bonding (teaming)
+ - SNMP
+ - Generic Receive Offload
+ - Data Center Bridging
+
+Channel Bonding documentation can be found in the Linux kernel source:
+/Documentation/networking/bonding.txt
+
+Ethtool, lspci, and ifconfig can be used to display device and driver
+specific information.
+
+
+Identifying Your Adapter
+========================
+
+This driver supports devices based on the 82598 controller and the 82599
+controller.
+
+For specific information on identifying which adapter you have, please visit:
+
+    http://support.intel.com/support/network/sb/CS-008441.htm
+
+
+Building and Installation
+=========================
+
+select m for "Intel(R) 10GbE PCI Express adapters support" located at:
+      Location:
+        -> Device Drivers
+          -> Network device support (NETDEVICES [=y])
+            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+
+1. make modules & make modules_install
+
+2. Load the module:
+
+# modprobe ixgbe
+
+   The insmod command can be used if the full
+   path to the driver module is specified.  For example:
+
+     insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgbe/ixgbe.ko
+
+   With 2.6 based kernels also make sure that older ixgbe drivers are
+   removed from the kernel, before loading the new module:
+
+     rmmod ixgbe; modprobe ixgbe
+
+3. Assign an IP address to the interface by entering the following, where
+   x is the interface number:
+
+     ifconfig ethx <IP_address>
+
+4. Verify that the interface works. Enter the following, where <IP_address>
+   is the IP address for another machine on the same subnet as the interface
+   that is being tested:
+
+     ping  <IP_address>
+
+
+Additional Configurations
+=========================
+
+  Viewing Link Messages
+  ---------------------
+  Link messages will not be displayed to the console if the distribution is
+  restricting system messages. In order to see network driver link messages on
+  your console, set dmesg to eight by entering the following:
+
+       dmesg -n 8
+
+  NOTE: This setting is not saved across reboots.
+
+
+  Jumbo Frames
+  ------------
+  The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
+  enabled by changing the MTU to a value larger than the default of 1500.
+  The maximum value for the MTU is 16110.  Use the ifconfig command to
+  increase the MTU size.  For example:
+
+        ifconfig ethx mtu 9000 up
+
+  The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
+  with the maximum Jumbo Frames size of 16128.
+
+  Generic Receive Offload, aka GRO
+  --------------------------------
+  The driver supports the in-kernel software implementation of GRO.  GRO has
+  shown that by coalescing Rx traffic into larger chunks of data, CPU
+  utilization can be significantly reduced when under large Rx load.  GRO is an
+  evolution of the previously-used LRO interface.  GRO is able to coalesce
+  other protocols besides TCP.  It's also safe to use with configurations that
+  are problematic for LRO, namely bridging and iSCSI.
+
+  GRO is enabled by default in the driver.  Future versions of ethtool will
+  support disabling and re-enabling GRO on the fly.
+
+
+  Data Center Bridging, aka DCB
+  -----------------------------
+
+  DCB is a configuration Quality of Service implementation in hardware.
+  It uses the VLAN priority tag (802.1p) to filter traffic.  That means
+  that there are 8 different priorities that traffic can be filtered into.
+  It also enables priority flow control which can limit or eliminate the
+  number of dropped packets during network stress.  Bandwidth can be
+  allocated to each of these priorities, which is enforced at the hardware
+  level.
+
+  To enable DCB support in ixgbe, you must enable the DCB netlink layer to
+  allow the userspace tools (see below) to communicate with the driver.
+  This can be found in the kernel configuration here:
+
+        -> Networking support
+          -> Networking options
+            -> Data Center Bridging support
+
+  Once this is selected, DCB support must be selected for ixgbe.  This can
+  be found here:
+
+        -> Device Drivers
+          -> Network device support (NETDEVICES [=y])
+            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+              -> Intel(R) 10GbE PCI Express adapters support
+                -> Data Center Bridging (DCB) Support
+
+  After these options are selected, you must rebuild your kernel and your
+  modules.
+
+  In order to use DCB, userspace tools must be downloaded and installed.
+  The dcbd tools can be found at:
+
+        http://e1000.sf.net
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  Ethtool
+  version 3.0 or later is required for this functionality.
+
+  The latest release of ethtool can be found from
+  http://sourceforge.net/projects/gkernel.
+
+
+  NAPI
+  ----
+
+  NAPI (Rx polling mode) is supported in the ixgbe driver.  NAPI is enabled
+  by default in the driver.
+
+  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://e1000.sourceforge.net
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net

Documentation/networking/rds.txt

@@ -0,0 +1,356 @@
+
+Overview
+========
+
+This readme tries to provide some background on the hows and whys of RDS,
+and will hopefully help you find your way around the code.
+
+In addition, please see this email about RDS origins:
+http://oss.oracle.com/pipermail/rds-devel/2007-November/000228.html
+
+RDS Architecture
+================
+
+RDS provides reliable, ordered datagram delivery by using a single
+reliable connection between any two nodes in the cluster. This allows
+applications to use a single socket to talk to any other process in the
+cluster - so in a cluster with N processes you need N sockets, in contrast
+to N*N if you use a connection-oriented socket transport like TCP.
+
+RDS is not Infiniband-specific; it was designed to support different
+transports.  The current implementation used to support RDS over TCP as well
+as IB. Work is in progress to support RDS over iWARP, and using DCE to
+guarantee no dropped packets on Ethernet, it may be possible to use RDS over
+UDP in the future.
+
+The high-level semantics of RDS from the application's point of view are
+
+ *	Addressing
+        RDS uses IPv4 addresses and 16bit port numbers to identify
+        the end point of a connection. All socket operations that involve
+        passing addresses between kernel and user space generally
+        use a struct sockaddr_in.
+
+        The fact that IPv4 addresses are used does not mean the underlying
+        transport has to be IP-based. In fact, RDS over IB uses a
+        reliable IB connection; the IP address is used exclusively to
+        locate the remote node's GID (by ARPing for the given IP).
+
+        The port space is entirely independent of UDP, TCP or any other
+        protocol.
+
+ *	Socket interface
+        RDS sockets work *mostly* as you would expect from a BSD
+        socket. The next section will cover the details. At any rate,
+        all I/O is performed through the standard BSD socket API.
+        Some additions like zerocopy support are implemented through
+        control messages, while other extensions use the getsockopt/
+        setsockopt calls.
+
+        Sockets must be bound before you can send or receive data.
+        This is needed because binding also selects a transport and
+        attaches it to the socket. Once bound, the transport assignment
+        does not change. RDS will tolerate IPs moving around (eg in
+        a active-active HA scenario), but only as long as the address
+        doesn't move to a different transport.
+
+ *	sysctls
+        RDS supports a number of sysctls in /proc/sys/net/rds
+
+
+Socket Interface
+================
+
+  AF_RDS, PF_RDS, SOL_RDS
+        These constants haven't been assigned yet, because RDS isn't in
+        mainline yet. Currently, the kernel module assigns some constant
+        and publishes it to user space through two sysctl files
+                /proc/sys/net/rds/pf_rds
+                /proc/sys/net/rds/sol_rds
+
+  fd = socket(PF_RDS, SOCK_SEQPACKET, 0);
+        This creates a new, unbound RDS socket.
+
+  setsockopt(SOL_SOCKET): send and receive buffer size
+        RDS honors the send and receive buffer size socket options.
+        You are not allowed to queue more than SO_SNDSIZE bytes to
+        a socket. A message is queued when sendmsg is called, and
+        it leaves the queue when the remote system acknowledges
+        its arrival.
+
+        The SO_RCVSIZE option controls the maximum receive queue length.
+        This is a soft limit rather than a hard limit - RDS will
+        continue to accept and queue incoming messages, even if that
+        takes the queue length over the limit. However, it will also
+        mark the port as "congested" and send a congestion update to
+        the source node. The source node is supposed to throttle any
+        processes sending to this congested port.
+
+  bind(fd, &sockaddr_in, ...)
+        This binds the socket to a local IP address and port, and a
+        transport.
+
+  sendmsg(fd, ...)
+        Sends a message to the indicated recipient. The kernel will
+        transparently establish the underlying reliable connection
+        if it isn't up yet.
+
+        An attempt to send a message that exceeds SO_SNDSIZE will
+        return with -EMSGSIZE
+
+        An attempt to send a message that would take the total number
+        of queued bytes over the SO_SNDSIZE threshold will return
+        EAGAIN.
+
+        An attempt to send a message to a destination that is marked
+        as "congested" will return ENOBUFS.
+
+  recvmsg(fd, ...)
+        Receives a message that was queued to this socket. The sockets
+        recv queue accounting is adjusted, and if the queue length
+        drops below SO_SNDSIZE, the port is marked uncongested, and
+        a congestion update is sent to all peers.
+
+        Applications can ask the RDS kernel module to receive
+        notifications via control messages (for instance, there is a
+        notification when a congestion update arrived, or when a RDMA
+        operation completes). These notifications are received through
+        the msg.msg_control buffer of struct msghdr. The format of the
+        messages is described in manpages.
+
+  poll(fd)
+        RDS supports the poll interface to allow the application
+        to implement async I/O.
+
+        POLLIN handling is pretty straightforward. When there's an
+        incoming message queued to the socket, or a pending notification,
+        we signal POLLIN.
+
+        POLLOUT is a little harder. Since you can essentially send
+        to any destination, RDS will always signal POLLOUT as long as
+        there's room on the send queue (ie the number of bytes queued
+        is less than the sendbuf size).
+
+        However, the kernel will refuse to accept messages to
+        a destination marked congested - in this case you will loop
+        forever if you rely on poll to tell you what to do.
+        This isn't a trivial problem, but applications can deal with
+        this - by using congestion notifications, and by checking for
+        ENOBUFS errors returned by sendmsg.
+
+  setsockopt(SOL_RDS, RDS_CANCEL_SENT_TO, &sockaddr_in)
+        This allows the application to discard all messages queued to a
+        specific destination on this particular socket.
+
+        This allows the application to cancel outstanding messages if
+        it detects a timeout. For instance, if it tried to send a message,
+        and the remote host is unreachable, RDS will keep trying forever.
+        The application may decide it's not worth it, and cancel the
+        operation. In this case, it would use RDS_CANCEL_SENT_TO to
+        nuke any pending messages.
+
+
+RDMA for RDS
+============
+
+  see rds-rdma(7) manpage (available in rds-tools)
+
+
+Congestion Notifications
+========================
+
+  see rds(7) manpage
+
+
+RDS Protocol
+============
+
+  Message header
+
+    The message header is a 'struct rds_header' (see rds.h):
+    Fields:
+      h_sequence:
+          per-packet sequence number
+      h_ack:
+          piggybacked acknowledgment of last packet received
+      h_len:
+          length of data, not including header
+      h_sport:
+          source port
+      h_dport:
+          destination port
+      h_flags:
+          CONG_BITMAP - this is a congestion update bitmap
+          ACK_REQUIRED - receiver must ack this packet
+          RETRANSMITTED - packet has previously been sent
+      h_credit:
+          indicate to other end of connection that
+          it has more credits available (i.e. there is
+          more send room)
+      h_padding[4]:
+          unused, for future use
+      h_csum:
+          header checksum
+      h_exthdr:
+          optional data can be passed here. This is currently used for
+          passing RDMA-related information.
+
+  ACK and retransmit handling
+
+      One might think that with reliable IB connections you wouldn't need
+      to ack messages that have been received.  The problem is that IB
+      hardware generates an ack message before it has DMAed the message
+      into memory.  This creates a potential message loss if the HCA is
+      disabled for any reason between when it sends the ack and before
+      the message is DMAed and processed.  This is only a potential issue
+      if another HCA is available for fail-over.
+
+      Sending an ack immediately would allow the sender to free the sent
+      message from their send queue quickly, but could cause excessive
+      traffic to be used for acks. RDS piggybacks acks on sent data
+      packets.  Ack-only packets are reduced by only allowing one to be
+      in flight at a time, and by the sender only asking for acks when
+      its send buffers start to fill up. All retransmissions are also
+      acked.
+
+  Flow Control
+
+      RDS's IB transport uses a credit-based mechanism to verify that
+      there is space in the peer's receive buffers for more data. This
+      eliminates the need for hardware retries on the connection.
+
+  Congestion
+
+      Messages waiting in the receive queue on the receiving socket
+      are accounted against the sockets SO_RCVBUF option value.  Only
+      the payload bytes in the message are accounted for.  If the
+      number of bytes queued equals or exceeds rcvbuf then the socket
+      is congested.  All sends attempted to this socket's address
+      should return block or return -EWOULDBLOCK.
+
+      Applications are expected to be reasonably tuned such that this
+      situation very rarely occurs.  An application encountering this
+      "back-pressure" is considered a bug.
+
+      This is implemented by having each node maintain bitmaps which
+      indicate which ports on bound addresses are congested.  As the
+      bitmap changes it is sent through all the connections which
+      terminate in the local address of the bitmap which changed.
+
+      The bitmaps are allocated as connections are brought up.  This
+      avoids allocation in the interrupt handling path which queues
+      sages on sockets.  The dense bitmaps let transports send the
+      entire bitmap on any bitmap change reasonably efficiently.  This
+      is much easier to implement than some finer-grained
+      communication of per-port congestion.  The sender does a very
+      inexpensive bit test to test if the port it's about to send to
+      is congested or not.
+
+
+RDS Transport Layer
+==================
+
+  As mentioned above, RDS is not IB-specific. Its code is divided
+  into a general RDS layer and a transport layer.
+
+  The general layer handles the socket API, congestion handling,
+  loopback, stats, usermem pinning, and the connection state machine.
+
+  The transport layer handles the details of the transport. The IB
+  transport, for example, handles all the queue pairs, work requests,
+  CM event handlers, and other Infiniband details.
+
+
+RDS Kernel Structures
+=====================
+
+  struct rds_message
+    aka possibly "rds_outgoing", the generic RDS layer copies data to
+    be sent and sets header fields as needed, based on the socket API.
+    This is then queued for the individual connection and sent by the
+    connection's transport.
+  struct rds_incoming
+    a generic struct referring to incoming data that can be handed from
+    the transport to the general code and queued by the general code
+    while the socket is awoken. It is then passed back to the transport
+    code to handle the actual copy-to-user.
+  struct rds_socket
+    per-socket information
+  struct rds_connection
+    per-connection information
+  struct rds_transport
+    pointers to transport-specific functions
+  struct rds_statistics
+    non-transport-specific statistics
+  struct rds_cong_map
+    wraps the raw congestion bitmap, contains rbnode, waitq, etc.
+
+Connection management
+=====================
+
+  Connections may be in UP, DOWN, CONNECTING, DISCONNECTING, and
+  ERROR states.
+
+  The first time an attempt is made by an RDS socket to send data to
+  a node, a connection is allocated and connected. That connection is
+  then maintained forever -- if there are transport errors, the
+  connection will be dropped and re-established.
+
+  Dropping a connection while packets are queued will cause queued or
+  partially-sent datagrams to be retransmitted when the connection is
+  re-established.
+
+
+The send path
+=============
+
+  rds_sendmsg()
+    struct rds_message built from incoming data
+    CMSGs parsed (e.g. RDMA ops)
+    transport connection alloced and connected if not already
+    rds_message placed on send queue
+    send worker awoken
+  rds_send_worker()
+    calls rds_send_xmit() until queue is empty
+  rds_send_xmit()
+    transmits congestion map if one is pending
+    may set ACK_REQUIRED
+    calls transport to send either non-RDMA or RDMA message
+    (RDMA ops never retransmitted)
+  rds_ib_xmit()
+    allocs work requests from send ring
+    adds any new send credits available to peer (h_credits)
+    maps the rds_message's sg list
+    piggybacks ack
+    populates work requests
+    post send to connection's queue pair
+
+The recv path
+=============
+
+  rds_ib_recv_cq_comp_handler()
+    looks at write completions
+    unmaps recv buffer from device
+    no errors, call rds_ib_process_recv()
+    refill recv ring
+  rds_ib_process_recv()
+    validate header checksum
+    copy header to rds_ib_incoming struct if start of a new datagram
+    add to ibinc's fraglist
+    if competed datagram:
+      update cong map if datagram was cong update
+      call rds_recv_incoming() otherwise
+      note if ack is required
+  rds_recv_incoming()
+    drop duplicate packets
+    respond to pings
+    find the sock associated with this datagram
+    add to sock queue
+    wake up sock
+    do some congestion calculations
+  rds_recvmsg
+    copy data into user iovec
+    handle CMSGs
+    return to application
+
+

Documentation/networking/timestamping.txt

@@ -0,0 +1,180 @@
+The existing interfaces for getting network packages time stamped are:
+
+* SO_TIMESTAMP
+  Generate time stamp for each incoming packet using the (not necessarily
+  monotonous!) system time. Result is returned via recv_msg() in a
+  control message as timeval (usec resolution).
+
+* SO_TIMESTAMPNS
+  Same time stamping mechanism as SO_TIMESTAMP, but returns result as
+  timespec (nsec resolution).
+
+* IP_MULTICAST_LOOP + SO_TIMESTAMP[NS]
+  Only for multicasts: approximate send time stamp by receiving the looped
+  packet and using its receive time stamp.
+
+The following interface complements the existing ones: receive time
+stamps can be generated and returned for arbitrary packets and much
+closer to the point where the packet is really sent. Time stamps can
+be generated in software (as before) or in hardware (if the hardware
+has such a feature).
+
+SO_TIMESTAMPING:
+
+Instructs the socket layer which kind of information is wanted. The
+parameter is an integer with some of the following bits set. Setting
+other bits is an error and doesn't change the current state.
+
+SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamp in hardware
+SOF_TIMESTAMPING_TX_SOFTWARE:  if SOF_TIMESTAMPING_TX_HARDWARE is off or
+                               fails, then do it in software
+SOF_TIMESTAMPING_RX_HARDWARE:  return the original, unmodified time stamp
+                               as generated by the hardware
+SOF_TIMESTAMPING_RX_SOFTWARE:  if SOF_TIMESTAMPING_RX_HARDWARE is off or
+                               fails, then do it in software
+SOF_TIMESTAMPING_RAW_HARDWARE: return original raw hardware time stamp
+SOF_TIMESTAMPING_SYS_HARDWARE: return hardware time stamp transformed to
+                               the system time base
+SOF_TIMESTAMPING_SOFTWARE:     return system time stamp generated in
+                               software
+
+SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
+SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
+following control message:
+    struct scm_timestamping {
+           struct timespec systime;
+           struct timespec hwtimetrans;
+           struct timespec hwtimeraw;
+    };
+
+recvmsg() can be used to get this control message for regular incoming
+packets. For send time stamps the outgoing packet is looped back to
+the socket's error queue with the send time stamp(s) attached. It can
+be received with recvmsg(flags=MSG_ERRQUEUE). The call returns the
+original outgoing packet data including all headers preprended down to
+and including the link layer, the scm_timestamping control message and
+a sock_extended_err control message with ee_errno==ENOMSG and
+ee_origin==SO_EE_ORIGIN_TIMESTAMPING. A socket with such a pending
+bounced packet is ready for reading as far as select() is concerned.
+If the outgoing packet has to be fragmented, then only the first
+fragment is time stamped and returned to the sending socket.
+
+All three values correspond to the same event in time, but were
+generated in different ways. Each of these values may be empty (= all
+zero), in which case no such value was available. If the application
+is not interested in some of these values, they can be left blank to
+avoid the potential overhead of calculating them.
+
+systime is the value of the system time at that moment. This
+corresponds to the value also returned via SO_TIMESTAMP[NS]. If the
+time stamp was generated by hardware, then this field is
+empty. Otherwise it is filled in if SOF_TIMESTAMPING_SOFTWARE is
+set.
+
+hwtimeraw is the original hardware time stamp. Filled in if
+SOF_TIMESTAMPING_RAW_HARDWARE is set. No assumptions about its
+relation to system time should be made.
+
+hwtimetrans is the hardware time stamp transformed so that it
+corresponds as good as possible to system time. This correlation is
+not perfect; as a consequence, sorting packets received via different
+NICs by their hwtimetrans may differ from the order in which they were
+received. hwtimetrans may be non-monotonic even for the same NIC.
+Filled in if SOF_TIMESTAMPING_SYS_HARDWARE is set. Requires support
+by the network device and will be empty without that support.
+
+
+SIOCSHWTSTAMP:
+
+Hardware time stamping must also be initialized for each device driver
+that is expected to do hardware time stamping. The parameter is:
+
+struct hwtstamp_config {
+    int flags;           /* no flags defined right now, must be zero */
+    int tx_type;         /* HWTSTAMP_TX_* */
+    int rx_filter;       /* HWTSTAMP_FILTER_* */
+};
+
+Desired behavior is passed into the kernel and to a specific device by
+calling ioctl(SIOCSHWTSTAMP) with a pointer to a struct ifreq whose
+ifr_data points to a struct hwtstamp_config. The tx_type and
+rx_filter are hints to the driver what it is expected to do. If
+the requested fine-grained filtering for incoming packets is not
+supported, the driver may time stamp more than just the requested types
+of packets.
+
+A driver which supports hardware time stamping shall update the struct
+with the actual, possibly more permissive configuration. If the
+requested packets cannot be time stamped, then nothing should be
+changed and ERANGE shall be returned (in contrast to EINVAL, which
+indicates that SIOCSHWTSTAMP is not supported at all).
+
+Only a processes with admin rights may change the configuration. User
+space is responsible to ensure that multiple processes don't interfere
+with each other and that the settings are reset.
+
+/* possible values for hwtstamp_config->tx_type */
+enum {
+	/*
+	 * no outgoing packet will need hardware time stamping;
+	 * should a packet arrive which asks for it, no hardware
+	 * time stamping will be done
+	 */
+	HWTSTAMP_TX_OFF,
+
+	/*
+	 * enables hardware time stamping for outgoing packets;
+	 * the sender of the packet decides which are to be
+	 * time stamped by setting SOF_TIMESTAMPING_TX_SOFTWARE
+	 * before sending the packet
+	 */
+	HWTSTAMP_TX_ON,
+};
+
+/* possible values for hwtstamp_config->rx_filter */
+enum {
+	/* time stamp no incoming packet at all */
+	HWTSTAMP_FILTER_NONE,
+
+	/* time stamp any incoming packet */
+	HWTSTAMP_FILTER_ALL,
+
+        /* return value: time stamp all packets requested plus some others */
+        HWTSTAMP_FILTER_SOME,
+
+	/* PTP v1, UDP, any kind of event packet */
+	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
+
+        ...
+};
+
+
+DEVICE IMPLEMENTATION
+
+A driver which supports hardware time stamping must support the
+SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
+in the skb with skb_hwtstamp_set().
+
+Time stamps for outgoing packets are to be generated as follows:
+- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
+  returns non-zero. If yes, then the driver is expected
+  to do hardware time stamping.
+- If this is possible for the skb and requested, then declare
+  that the driver is doing the time stamping by calling
+  skb_hwtstamp_tx_in_progress(). A driver not supporting
+  hardware time stamping doesn't do that. A driver must never
+  touch sk_buff::tstamp! It is used to store how time stamping
+  for an outgoing packets is to be done.
+- As soon as the driver has sent the packet and/or obtained a
+  hardware time stamp for it, it passes the time stamp back by
+  calling skb_hwtstamp_tx() with the original skb, the raw
+  hardware time stamp and a handle to the device (necessary
+  to convert the hardware time stamp to system time). If obtaining
+  the hardware time stamp somehow fails, then the driver should
+  not fall back to software time stamping. The rationale is that
+  this would occur at a later time in the processing pipeline
+  than other software time stamping and therefore could lead
+  to unexpected deltas between time stamps.
+- If the driver did not call skb_hwtstamp_tx_in_progress(), then
+  dev_hard_start_xmit() checks whether software time stamping
+  is wanted as fallback and potentially generates the time stamp.

Documentation/networking/timestamping/.gitignore

@@ -0,0 +1 @@
+timestamping

Documentation/networking/timestamping/Makefile

@@ -0,0 +1,6 @@
+CPPFLAGS = -I../../../include
+
+timestamping: timestamping.c
+
+clean:
+	rm -f timestamping

Documentation/networking/timestamping/timestamping.c

@@ -0,0 +1,533 @@
+/*
+ * This program demonstrates how the various time stamping features in
+ * the Linux kernel work. It emulates the behavior of a PTP
+ * implementation in stand-alone master mode by sending PTPv1 Sync
+ * multicasts once every second. It looks for similar packets, but
+ * beyond that doesn't actually implement PTP.
+ *
+ * Outgoing packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support.
+ *
+ * Incoming packets are time stamped with SO_TIMESTAMPING with or
+ * without hardware support, SIOCGSTAMP[NS] (per-socket time stamp) and
+ * SO_TIMESTAMP[NS].
+ *
+ * Copyright (C) 2009 Intel Corporation.
+ * Author: Patrick Ohly <patrick.ohly@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+#include <sys/ioctl.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+
+#include "asm/types.h"
+#include "linux/net_tstamp.h"
+#include "linux/errqueue.h"
+
+#ifndef SO_TIMESTAMPING
+# define SO_TIMESTAMPING         37
+# define SCM_TIMESTAMPING        SO_TIMESTAMPING
+#endif
+
+#ifndef SO_TIMESTAMPNS
+# define SO_TIMESTAMPNS 35
+#endif
+
+#ifndef SIOCGSTAMPNS
+# define SIOCGSTAMPNS 0x8907
+#endif
+
+#ifndef SIOCSHWTSTAMP
+# define SIOCSHWTSTAMP 0x89b0
+#endif
+
+static void usage(const char *error)
+{
+	if (error)
+		printf("invalid option: %s\n", error);
+	printf("timestamping interface option*\n\n"
+	       "Options:\n"
+	       "  IP_MULTICAST_LOOP - looping outgoing multicasts\n"
+	       "  SO_TIMESTAMP - normal software time stamping, ms resolution\n"
+	       "  SO_TIMESTAMPNS - more accurate software time stamping\n"
+	       "  SOF_TIMESTAMPING_TX_HARDWARE - hardware time stamping of outgoing packets\n"
+	       "  SOF_TIMESTAMPING_TX_SOFTWARE - software fallback for outgoing packets\n"
+	       "  SOF_TIMESTAMPING_RX_HARDWARE - hardware time stamping of incoming packets\n"
+	       "  SOF_TIMESTAMPING_RX_SOFTWARE - software fallback for incoming packets\n"
+	       "  SOF_TIMESTAMPING_SOFTWARE - request reporting of software time stamps\n"
+	       "  SOF_TIMESTAMPING_SYS_HARDWARE - request reporting of transformed HW time stamps\n"
+	       "  SOF_TIMESTAMPING_RAW_HARDWARE - request reporting of raw HW time stamps\n"
+	       "  SIOCGSTAMP - check last socket time stamp\n"
+	       "  SIOCGSTAMPNS - more accurate socket time stamp\n");
+	exit(1);
+}
+
+static void bail(const char *error)
+{
+	printf("%s: %s\n", error, strerror(errno));
+	exit(1);
+}
+
+static const unsigned char sync[] = {
+	0x00, 0x01, 0x00, 0x01,
+	0x5f, 0x44, 0x46, 0x4c,
+	0x54, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x01, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x01, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x08,
+	0x00, 0x00, 0x00, 0x00,
+	0x49, 0x05, 0xcd, 0x01,
+	0x29, 0xb1, 0x8d, 0xb0,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x37,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x01, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x01,
+	0x00, 0x00, 0xf0, 0x60,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x04,
+	0x44, 0x46, 0x4c, 0x54,
+	0x00, 0x01,
+
+	/* fake uuid */
+	0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05,
+
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00
+};
+
+static void sendpacket(int sock, struct sockaddr *addr, socklen_t addr_len)
+{
+	struct timeval now;
+	int res;
+
+	res = sendto(sock, sync, sizeof(sync), 0,
+		addr, addr_len);
+	gettimeofday(&now, 0);
+	if (res < 0)
+		printf("%s: %s\n", "send", strerror(errno));
+	else
+		printf("%ld.%06ld: sent %d bytes\n",
+		       (long)now.tv_sec, (long)now.tv_usec,
+		       res);
+}
+
+static void printpacket(struct msghdr *msg, int res,
+			char *data,
+			int sock, int recvmsg_flags,
+			int siocgstamp, int siocgstampns)
+{
+	struct sockaddr_in *from_addr = (struct sockaddr_in *)msg->msg_name;
+	struct cmsghdr *cmsg;
+	struct timeval tv;
+	struct timespec ts;
+	struct timeval now;
+
+	gettimeofday(&now, 0);
+
+	printf("%ld.%06ld: received %s data, %d bytes from %s, %d bytes control messages\n",
+	       (long)now.tv_sec, (long)now.tv_usec,
+	       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+	       res,
+	       inet_ntoa(from_addr->sin_addr),
+	       msg->msg_controllen);
+	for (cmsg = CMSG_FIRSTHDR(msg);
+	     cmsg;
+	     cmsg = CMSG_NXTHDR(msg, cmsg)) {
+		printf("   cmsg len %d: ", cmsg->cmsg_len);
+		switch (cmsg->cmsg_level) {
+		case SOL_SOCKET:
+			printf("SOL_SOCKET ");
+			switch (cmsg->cmsg_type) {
+			case SO_TIMESTAMP: {
+				struct timeval *stamp =
+					(struct timeval *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMP %ld.%06ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_usec);
+				break;
+			}
+			case SO_TIMESTAMPNS: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPNS %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			case SO_TIMESTAMPING: {
+				struct timespec *stamp =
+					(struct timespec *)CMSG_DATA(cmsg);
+				printf("SO_TIMESTAMPING ");
+				printf("SW %ld.%09ld ",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				stamp++;
+				printf("HW transformed %ld.%09ld ",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				stamp++;
+				printf("HW raw %ld.%09ld",
+				       (long)stamp->tv_sec,
+				       (long)stamp->tv_nsec);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		case IPPROTO_IP:
+			printf("IPPROTO_IP ");
+			switch (cmsg->cmsg_type) {
+			case IP_RECVERR: {
+				struct sock_extended_err *err =
+					(struct sock_extended_err *)CMSG_DATA(cmsg);
+				printf("IP_RECVERR ee_errno '%s' ee_origin %d => %s",
+					strerror(err->ee_errno),
+					err->ee_origin,
+#ifdef SO_EE_ORIGIN_TIMESTAMPING
+					err->ee_origin == SO_EE_ORIGIN_TIMESTAMPING ?
+					"bounced packet" : "unexpected origin"
+#else
+					"probably SO_EE_ORIGIN_TIMESTAMPING"
+#endif
+					);
+				if (res < sizeof(sync))
+					printf(" => truncated data?!");
+				else if (!memcmp(sync, data + res - sizeof(sync),
+							sizeof(sync)))
+					printf(" => GOT OUR DATA BACK (HURRAY!)");
+				break;
+			}
+			case IP_PKTINFO: {
+				struct in_pktinfo *pktinfo =
+					(struct in_pktinfo *)CMSG_DATA(cmsg);
+				printf("IP_PKTINFO interface index %u",
+					pktinfo->ipi_ifindex);
+				break;
+			}
+			default:
+				printf("type %d", cmsg->cmsg_type);
+				break;
+			}
+			break;
+		default:
+			printf("level %d type %d",
+				cmsg->cmsg_level,
+				cmsg->cmsg_type);
+			break;
+		}
+		printf("\n");
+	}
+
+	if (siocgstamp) {
+		if (ioctl(sock, SIOCGSTAMP, &tv))
+			printf("   %s: %s\n", "SIOCGSTAMP", strerror(errno));
+		else
+			printf("SIOCGSTAMP %ld.%06ld\n",
+			       (long)tv.tv_sec,
+			       (long)tv.tv_usec);
+	}
+	if (siocgstampns) {
+		if (ioctl(sock, SIOCGSTAMPNS, &ts))
+			printf("   %s: %s\n", "SIOCGSTAMPNS", strerror(errno));
+		else
+			printf("SIOCGSTAMPNS %ld.%09ld\n",
+			       (long)ts.tv_sec,
+			       (long)ts.tv_nsec);
+	}
+}
+
+static void recvpacket(int sock, int recvmsg_flags,
+		       int siocgstamp, int siocgstampns)
+{
+	char data[256];
+	struct msghdr msg;
+	struct iovec entry;
+	struct sockaddr_in from_addr;
+	struct {
+		struct cmsghdr cm;
+		char control[512];
+	} control;
+	int res;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.msg_iov = &entry;
+	msg.msg_iovlen = 1;
+	entry.iov_base = data;
+	entry.iov_len = sizeof(data);
+	msg.msg_name = (caddr_t)&from_addr;
+	msg.msg_namelen = sizeof(from_addr);
+	msg.msg_control = &control;
+	msg.msg_controllen = sizeof(control);
+
+	res = recvmsg(sock, &msg, recvmsg_flags|MSG_DONTWAIT);
+	if (res < 0) {
+		printf("%s %s: %s\n",
+		       "recvmsg",
+		       (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
+		       strerror(errno));
+	} else {
+		printpacket(&msg, res, data,
+			    sock, recvmsg_flags,
+			    siocgstamp, siocgstampns);
+	}
+}
+
+int main(int argc, char **argv)
+{
+	int so_timestamping_flags = 0;
+	int so_timestamp = 0;
+	int so_timestampns = 0;
+	int siocgstamp = 0;
+	int siocgstampns = 0;
+	int ip_multicast_loop = 0;
+	char *interface;
+	int i;
+	int enabled = 1;
+	int sock;
+	struct ifreq device;
+	struct ifreq hwtstamp;
+	struct hwtstamp_config hwconfig, hwconfig_requested;
+	struct sockaddr_in addr;
+	struct ip_mreq imr;
+	struct in_addr iaddr;
+	int val;
+	socklen_t len;
+	struct timeval next;
+
+	if (argc < 2)
+		usage(0);
+	interface = argv[1];
+
+	for (i = 2; i < argc; i++) {
+		if (!strcasecmp(argv[i], "SO_TIMESTAMP"))
+			so_timestamp = 1;
+		else if (!strcasecmp(argv[i], "SO_TIMESTAMPNS"))
+			so_timestampns = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMP"))
+			siocgstamp = 1;
+		else if (!strcasecmp(argv[i], "SIOCGSTAMPNS"))
+			siocgstampns = 1;
+		else if (!strcasecmp(argv[i], "IP_MULTICAST_LOOP"))
+			ip_multicast_loop = 1;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_TX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_TX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RX_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RX_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SOFTWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_SOFTWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SYS_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_SYS_HARDWARE;
+		else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RAW_HARDWARE"))
+			so_timestamping_flags |= SOF_TIMESTAMPING_RAW_HARDWARE;
+		else
+			usage(argv[i]);
+	}
+
+	sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
+	if (socket < 0)
+		bail("socket");
+
+	memset(&device, 0, sizeof(device));
+	strncpy(device.ifr_name, interface, sizeof(device.ifr_name));
+	if (ioctl(sock, SIOCGIFADDR, &device) < 0)
+		bail("getting interface IP address");
+
+	memset(&hwtstamp, 0, sizeof(hwtstamp));
+	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
+	hwtstamp.ifr_data = (void *)&hwconfig;
+	memset(&hwconfig, 0, sizeof(&hwconfig));
+	hwconfig.tx_type =
+		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
+		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
+	hwconfig.rx_filter =
+		(so_timestamping_flags & SOF_TIMESTAMPING_RX_HARDWARE) ?
+		HWTSTAMP_FILTER_PTP_V1_L4_SYNC : HWTSTAMP_FILTER_NONE;
+	hwconfig_requested = hwconfig;
+	if (ioctl(sock, SIOCSHWTSTAMP, &hwtstamp) < 0) {
+		if ((errno == EINVAL || errno == ENOTSUP) &&
+		    hwconfig_requested.tx_type == HWTSTAMP_TX_OFF &&
+		    hwconfig_requested.rx_filter == HWTSTAMP_FILTER_NONE)
+			printf("SIOCSHWTSTAMP: disabling hardware time stamping not possible\n");
+		else
+			bail("SIOCSHWTSTAMP");
+	}
+	printf("SIOCSHWTSTAMP: tx_type %d requested, got %d; rx_filter %d requested, got %d\n",
+	       hwconfig_requested.tx_type, hwconfig.tx_type,
+	       hwconfig_requested.rx_filter, hwconfig.rx_filter);
+
+	/* bind to PTP port */
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = htons(319 /* PTP event port */);
+	if (bind(sock,
+		 (struct sockaddr *)&addr,
+		 sizeof(struct sockaddr_in)) < 0)
+		bail("bind");
+
+	/* set multicast group for outgoing packets */
+	inet_aton("224.0.1.130", &iaddr); /* alternate PTP domain 1 */
+	addr.sin_addr = iaddr;
+	imr.imr_multiaddr.s_addr = iaddr.s_addr;
+	imr.imr_interface.s_addr =
+		((struct sockaddr_in *)&device.ifr_addr)->sin_addr.s_addr;
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_IF,
+		       &imr.imr_interface.s_addr, sizeof(struct in_addr)) < 0)
+		bail("set multicast");
+
+	/* join multicast group, loop our own packet */
+	if (setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP,
+		       &imr, sizeof(struct ip_mreq)) < 0)
+		bail("join multicast group");
+
+	if (setsockopt(sock, IPPROTO_IP, IP_MULTICAST_LOOP,
+		       &ip_multicast_loop, sizeof(enabled)) < 0) {
+		bail("loop multicast");
+	}
+
+	/* set socket options for time stamping */
+	if (so_timestamp &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMP,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMP");
+
+	if (so_timestampns &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS,
+			   &enabled, sizeof(enabled)) < 0)
+		bail("setsockopt SO_TIMESTAMPNS");
+
+	if (so_timestamping_flags &&
+		setsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING,
+			   &so_timestamping_flags,
+			   sizeof(so_timestamping_flags)) < 0)
+		bail("setsockopt SO_TIMESTAMPING");
+
+	/* request IP_PKTINFO for debugging purposes */
+	if (setsockopt(sock, SOL_IP, IP_PKTINFO,
+		       &enabled, sizeof(enabled)) < 0)
+		printf("%s: %s\n", "setsockopt IP_PKTINFO", strerror(errno));
+
+	/* verify socket options */
+	len = sizeof(val);
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMP, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMP", strerror(errno));
+	else
+		printf("SO_TIMESTAMP %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPNS, &val, &len) < 0)
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPNS",
+		       strerror(errno));
+	else
+		printf("SO_TIMESTAMPNS %d\n", val);
+
+	if (getsockopt(sock, SOL_SOCKET, SO_TIMESTAMPING, &val, &len) < 0) {
+		printf("%s: %s\n", "getsockopt SO_TIMESTAMPING",
+		       strerror(errno));
+	} else {
+		printf("SO_TIMESTAMPING %d\n", val);
+		if (val != so_timestamping_flags)
+			printf("   not the expected value %d\n",
+			       so_timestamping_flags);
+	}
+
+	/* send packets forever every five seconds */
+	gettimeofday(&next, 0);
+	next.tv_sec = (next.tv_sec + 1) / 5 * 5;
+	next.tv_usec = 0;
+	while (1) {
+		struct timeval now;
+		struct timeval delta;
+		long delta_us;
+		int res;
+		fd_set readfs, errorfs;
+
+		gettimeofday(&now, 0);
+		delta_us = (long)(next.tv_sec - now.tv_sec) * 1000000 +
+			(long)(next.tv_usec - now.tv_usec);
+		if (delta_us > 0) {
+			/* continue waiting for timeout or data */
+			delta.tv_sec = delta_us / 1000000;
+			delta.tv_usec = delta_us % 1000000;
+
+			FD_ZERO(&readfs);
+			FD_ZERO(&errorfs);
+			FD_SET(sock, &readfs);
+			FD_SET(sock, &errorfs);
+			printf("%ld.%06ld: select %ldus\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       delta_us);
+			res = select(sock + 1, &readfs, 0, &errorfs, &delta);
+			gettimeofday(&now, 0);
+			printf("%ld.%06ld: select returned: %d, %s\n",
+			       (long)now.tv_sec, (long)now.tv_usec,
+			       res,
+			       res < 0 ? strerror(errno) : "success");
+			if (res > 0) {
+				if (FD_ISSET(sock, &readfs))
+					printf("ready for reading\n");
+				if (FD_ISSET(sock, &errorfs))
+					printf("has error\n");
+				recvpacket(sock, 0,
+					   siocgstamp,
+					   siocgstampns);
+				recvpacket(sock, MSG_ERRQUEUE,
+					   siocgstamp,
+					   siocgstampns);
+			}
+		} else {
+			/* write one packet */
+			sendpacket(sock,
+				   (struct sockaddr *)&addr,
+				   sizeof(addr));
+			next.tv_sec += 5;
+			continue;
+		}
+	}
+
+	return 0;
+}

Documentation/powerpc/dts-bindings/fsl/tsec.txt

@@ -56,6 +56,12 @@ Properties:
     hardware.
   - fsl,magic-packet : If present, indicates that the hardware supports
     waking up via magic packet.
+  - bd-stash : If present, indicates that the hardware supports stashing
+    buffer descriptors in the L2.
+  - rx-stash-len : Denotes the number of bytes of a received buffer to stash
+    in the L2.
+  - rx-stash-idx : Denotes the index of the first byte from the received
+    buffer to stash in the L2.
 
 Example:
 	ethernet@24000 {

MAINTAINERS

@@ -1011,6 +1011,8 @@ L:	netdev@vger.kernel.org
 S:	Supported
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
+P:	Matt Carlson
+M:	mcarlson@broadcom.com
 P:	Michael Chan
 M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
@@ -3646,6 +3648,12 @@ M:	florian.fainelli@telecomint.eu
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+RDS - RELIABLE DATAGRAM SOCKETS
+P:	Andy Grover
+M:	andy.grover@oracle.com
+L:	rds-devel@oss.oracle.com
+S:	Supported
+
 READ-COPY UPDATE (RCU)
 P:	Dipankar Sarma
 M:	dipankar@in.ibm.com

arch/alpha/include/asm/socket.h

@@ -62,6 +62,9 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */

arch/arm/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */

arch/arm/mach-kirkwood/common.c

@@ -231,14 +231,17 @@ static struct platform_device kirkwood_switch_device = {
 
 void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
 {
+	int i;
+
 	if (irq != NO_IRQ) {
 		kirkwood_switch_resources[0].start = irq;
 		kirkwood_switch_resources[0].end = irq;
 		kirkwood_switch_device.num_resources = 1;
 	}
 
-	d->mii_bus = &kirkwood_ge00_shared.dev;
 	d->netdev = &kirkwood_ge00.dev;
+	for (i = 0; i < d->nr_chips; i++)
+		d->chip[i].mii_bus = &kirkwood_ge00_shared.dev;
 	kirkwood_switch_device.dev.platform_data = d;
 
 	platform_device_register(&kirkwood_switch_device);

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -75,7 +75,7 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f6281_switch_data = {
+static struct dsa_chip_data rd88f6281_switch_chip_data = {
 	.port_names[0]	= "lan1",
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
@@ -83,6 +83,11 @@ static struct dsa_platform_data rd88f6281_switch_data = {
 	.port_names[5]	= "cpu",
 };
 
+static struct dsa_platform_data rd88f6281_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f6281_switch_chip_data,
+};
+
 static struct mv643xx_eth_platform_data rd88f6281_ge01_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
 };
@@ -105,12 +110,12 @@ static void __init rd88f6281_init(void)
 	kirkwood_ge00_init(&rd88f6281_ge00_data);
 	kirkwood_pcie_id(&dev, &rev);
 	if (rev == MV88F6281_REV_A0) {
-		rd88f6281_switch_data.sw_addr = 10;
+		rd88f6281_switch_chip_data.sw_addr = 10;
 		kirkwood_ge01_init(&rd88f6281_ge01_data);
 	} else {
-		rd88f6281_switch_data.port_names[4] = "wan";
+		rd88f6281_switch_chip_data.port_names[4] = "wan";
 	}
-	kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ);
+	kirkwood_ge00_switch_init(&rd88f6281_switch_plat_data, NO_IRQ);
 
 	kirkwood_rtc_init();
 	kirkwood_sata_init(&rd88f6281_sata_data);

arch/arm/mach-orion5x/common.c

@@ -220,14 +220,17 @@ static struct platform_device orion5x_switch_device = {
 
 void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
 {
+	int i;
+
 	if (irq != NO_IRQ) {
 		orion5x_switch_resources[0].start = irq;
 		orion5x_switch_resources[0].end = irq;
 		orion5x_switch_device.num_resources = 1;
 	}
 
-	d->mii_bus = &orion5x_eth_shared.dev;
 	d->netdev = &orion5x_eth.dev;
+	for (i = 0; i < d->nr_chips; i++)
+		d->chip[i].mii_bus = &orion5x_eth_shared.dev;
 	orion5x_switch_device.dev.platform_data = d;
 
 	platform_device_register(&orion5x_switch_device);

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -94,7 +94,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -103,6 +103,11 @@ static struct dsa_platform_data rd88f5181l_fxo_switch_data = {
 	.port_names[7]	= "lan3",
 };
 
+static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f5181l_fxo_switch_chip_data,
+};
+
 static void __init rd88f5181l_fxo_init(void)
 {
 	/*
@@ -117,7 +122,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE,

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -95,7 +95,7 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f5181l_ge_switch_data = {
+static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -104,6 +104,11 @@ static struct dsa_platform_data rd88f5181l_ge_switch_data = {
 	.port_names[7]	= "lan3",
 };
 
+static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f5181l_ge_switch_chip_data,
+};
+
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 	I2C_BOARD_INFO("ds1338", 0x68),
 };
@@ -122,7 +127,8 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8));
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
+				gpio_to_irq(8));
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 

arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

@@ -35,7 +35,7 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
+static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[0]	= "lan1",
 	.port_names[1]	= "lan2",
 	.port_names[2]	= "lan3",
@@ -44,6 +44,11 @@ static struct dsa_platform_data rd88f6183ap_ge_switch_data = {
 	.port_names[5]	= "cpu",
 };
 
+static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &rd88f6183ap_ge_switch_chip_data,
+};
+
 static struct mtd_partition rd88f6183ap_ge_partitions[] = {
 	{
 		.name	= "kernel",
@@ -89,7 +94,8 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3));
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
+				gpio_to_irq(3));
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -106,7 +106,7 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.duplex		= DUPLEX_FULL,
 };
 
-static struct dsa_platform_data wrt350n_v2_switch_data = {
+static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[0]	= "lan2",
 	.port_names[1]	= "lan1",
 	.port_names[2]	= "wan",
@@ -115,6 +115,11 @@ static struct dsa_platform_data wrt350n_v2_switch_data = {
 	.port_names[7]	= "lan4",
 };
 
+static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+	.nr_chips	= 1,
+	.chip		= &wrt350n_v2_switch_chip_data,
+};
+
 static void __init wrt350n_v2_init(void)
 {
 	/*
@@ -129,7 +134,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,

arch/avr32/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* __ASM_AVR32_SOCKET_H */

arch/blackfin/include/asm/socket.h

@@ -53,4 +53,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif				/* _ASM_SOCKET_H */

arch/cris/include/asm/socket.h

@@ -56,6 +56,9 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */
 
 

arch/h8300/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */

arch/ia64/include/asm/socket.h

@@ -63,4 +63,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_IA64_SOCKET_H */

arch/m68k/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */

arch/m68knommu/platform/520x/config.c

@@ -49,8 +49,39 @@ static struct platform_device m520x_uart = {
 	.dev.platform_data	= m520x_uart_platform,
 };
 
+static struct resource m520x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x30000,
+		.end		= MCF_MBAR + 0x30000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 36,
+		.end		= 64 + 36,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 40,
+		.end		= 64 + 40,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 42,
+		.end		= 64 + 42,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m520x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m520x_fec_resources),
+	.resource		= m520x_fec_resources,
+};
+
 static struct platform_device *m520x_devices[] __initdata = {
 	&m520x_uart,
+	&m520x_fec,
 };
 
 /***************************************************************************/
@@ -103,6 +134,30 @@ static void __init m520x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m520x_fec_init(void)
+{
+	u32 imr;
+	u8 v;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
+	writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0x0001FFF0;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+
+	/* Set multi-function pins to ethernet mode */
+	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
+	writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
+
+	v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+	writeb(v | 0x0f, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
 /*
  *  Program the vector to be an auto-vectored.
  */
@@ -118,6 +173,7 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = coldfire_reset;
 	m520x_uarts_init();
+	m520x_fec_init();
 }
 
 /***************************************************************************/

arch/m68knommu/platform/523x/config.c

@@ -50,8 +50,39 @@ static struct platform_device m523x_uart = {
 	.dev.platform_data	= m523x_uart_platform,
 };
 
+static struct resource m523x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m523x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m523x_fec_resources),
+	.resource		= m523x_fec_resources,
+};
+
 static struct platform_device *m523x_devices[] __initdata = {
 	&m523x_uart,
+	&m523x_fec,
 };
 
 /***************************************************************************/
@@ -83,6 +114,25 @@ static void __init m523x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m523x_fec_init(void)
+{
+	u32 imr;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
+	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
+	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -103,6 +153,7 @@ void __init config_BSP(char *commandp, int size)
 	mcf_disableall();
 	mach_reset = coldfire_reset;
 	m523x_uarts_init();
+	m523x_fec_init();
 }
 
 /***************************************************************************/

arch/m68knommu/platform/5272/config.c

@@ -55,8 +55,39 @@ static struct platform_device m5272_uart = {
 	.dev.platform_data	= m5272_uart_platform,
 };
 
+static struct resource m5272_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x840,
+		.end		= MCF_MBAR + 0x840 + 0x1cf,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 86,
+		.end		= 86,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 87,
+		.end		= 87,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 88,
+		.end		= 88,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5272_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5272_fec_resources),
+	.resource		= m5272_fec_resources,
+};
+
 static struct platform_device *m5272_devices[] __initdata = {
 	&m5272_uart,
+	&m5272_fec,
 };
 
 /***************************************************************************/
@@ -91,6 +122,22 @@ static void __init m5272_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m5272_fec_init(void)
+{
+	u32 imr;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	imr = readl(MCF_MBAR + MCFSIM_ICR3);
+	imr = (imr & ~0x00000fff) | 0x00000ddd;
+	writel(imr, MCF_MBAR + MCFSIM_ICR3);
+
+	imr = readl(MCF_MBAR + MCFSIM_ICR1);
+	imr = (imr & ~0x0f000000) | 0x0d000000;
+	writel(imr, MCF_MBAR + MCFSIM_ICR1);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	volatile unsigned long	*icrp;
@@ -155,6 +202,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m5272_uarts_init();
+	m5272_fec_init();
 	platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
 	return 0;
 }

arch/m68knommu/platform/527x/config.c

@@ -50,8 +50,73 @@ static struct platform_device m527x_uart = {
 	.dev.platform_data	= m527x_uart_platform,
 };
 
+static struct resource m527x_fec0_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource m527x_fec1_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1800,
+		.end		= MCF_MBAR + 0x1800 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 128 + 23,
+		.end		= 128 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 128 + 27,
+		.end		= 128 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 128 + 29,
+		.end		= 128 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m527x_fec[] = {
+	{
+		.name		= "fec",
+		.id		= 0,
+		.num_resources	= ARRAY_SIZE(m527x_fec0_resources),
+		.resource	= m527x_fec0_resources,
+	},
+	{
+		.name		= "fec",
+		.id		= 1,
+		.num_resources	= ARRAY_SIZE(m527x_fec1_resources),
+		.resource	= m527x_fec1_resources,
+	},
+};
+
 static struct platform_device *m527x_devices[] __initdata = {
 	&m527x_uart,
+	&m527x_fec[0],
+#ifdef CONFIG_FEC2
+	&m527x_fec[1],
+#endif
 };
 
 /***************************************************************************/
@@ -97,6 +162,51 @@ static void __init m527x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m527x_fec_irq_init(int nr)
+{
+	unsigned long base;
+	u32 imr;
+
+	base = MCF_IPSBAR + (nr ? MCFICM_INTC1 : MCFICM_INTC0);
+
+	writeb(0x28, base + MCFINTC_ICR0 + 23);
+	writeb(0x27, base + MCFINTC_ICR0 + 27);
+	writeb(0x26, base + MCFINTC_ICR0 + 29);
+
+	imr = readl(base + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, base + MCFINTC_IMRH);
+	imr = readl(base + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, base + MCFINTC_IMRL);
+}
+
+static void __init m527x_fec_init(void)
+{
+	u16 par;
+	u8 v;
+
+	m527x_fec_irq_init(0);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100078);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+
+#ifdef CONFIG_FEC2
+	m527x_fec_irq_init(1);
+
+	/* Set multi-function pins to ethernet mode for fec1 */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100079);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+#endif
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -116,13 +226,14 @@ void __init config_BSP(char *commandp, int size)
 {
 	mcf_disableall();
 	mach_reset = coldfire_reset;
+	m527x_uarts_init();
+	m527x_fec_init();
 }
 
 /***************************************************************************/
 
 static int __init init_BSP(void)
 {
-	m527x_uarts_init();
 	platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
 	return 0;
 }

arch/m68knommu/platform/528x/config.c

@@ -57,8 +57,40 @@ static struct platform_device m528x_uart = {
 	.dev.platform_data	= m528x_uart_platform,
 };
 
+static struct resource m528x_fec_resources[] = {
+	{
+		.start		= MCF_MBAR + 0x1000,
+		.end		= MCF_MBAR + 0x1000 + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 23,
+		.end		= 64 + 23,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 27,
+		.end		= 64 + 27,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 29,
+		.end		= 64 + 29,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m528x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m528x_fec_resources),
+	.resource		= m528x_fec_resources,
+};
+
+
 static struct platform_device *m528x_devices[] __initdata = {
 	&m528x_uart,
+	&m528x_fec,
 };
 
 /***************************************************************************/
@@ -99,6 +131,31 @@ static void __init m528x_uarts_init(void)
 
 /***************************************************************************/
 
+static void __init m528x_fec_init(void)
+{
+	u32 imr;
+	u16 v16;
+
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23);
+	writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27);
+	writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29);
+
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr &= ~0xf;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
+	imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+	imr &= ~0xff800001;
+	writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	v16 = readw(MCF_IPSBAR + 0x100056);
+	writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
+	writeb(0xc0, MCF_IPSBAR + 0x100058);
+}
+
+/***************************************************************************/
+
 void mcf_disableall(void)
 {
 	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
@@ -158,6 +215,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m528x_uarts_init();
+	m528x_fec_init();
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
 	return 0;
 }

arch/m68knommu/platform/532x/config.c

@@ -61,8 +61,38 @@ static struct platform_device m532x_uart = {
 	.dev.platform_data	= m532x_uart_platform,
 };
 
+static struct resource m532x_fec_resources[] = {
+	{
+		.start		= 0xfc030000,
+		.end		= 0xfc0307ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= 64 + 36,
+		.end		= 64 + 36,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 40,
+		.end		= 64 + 40,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= 64 + 42,
+		.end		= 64 + 42,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m532x_fec = {
+	.name			= "fec",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m532x_fec_resources),
+	.resource		= m532x_fec_resources,
+};
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
+	&m532x_fec,
 };
 
 /***************************************************************************/
@@ -93,6 +123,24 @@ static void __init m532x_uarts_init(void)
 	for (line = 0; (line < nrlines); line++)
 		m532x_uart_init_line(line, m532x_uart_platform[line].irq);
 }
+/***************************************************************************/
+
+static void __init m532x_fec_init(void)
+{
+	/* Unmask FEC interrupts at ColdFire interrupt controller */
+	MCF_INTC0_ICR36 = 0x2;
+	MCF_INTC0_ICR40 = 0x2;
+	MCF_INTC0_ICR42 = 0x2;
+
+	MCF_INTC0_IMRH &= ~(MCF_INTC_IMRH_INT_MASK36 |
+		MCF_INTC_IMRH_INT_MASK40 | MCF_INTC_IMRH_INT_MASK42);
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+	MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+		MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+	MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+		MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
 
 /***************************************************************************/
 
@@ -150,6 +198,7 @@ void __init config_BSP(char *commandp, int size)
 static int __init init_BSP(void)
 {
 	m532x_uarts_init();
+	m532x_fec_init();
 	platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
 	return 0;
 }

arch/mips/include/asm/socket.h

@@ -75,6 +75,9 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types

arch/parisc/include/asm/socket.h

@@ -54,6 +54,9 @@
 
 #define SO_MARK			0x401f
 
+#define SO_TIMESTAMPING		0x4020
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */

arch/powerpc/include/asm/socket.h

@@ -61,4 +61,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif	/* _ASM_POWERPC_SOCKET_H */

arch/s390/include/asm/socket.h

@@ -62,4 +62,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_SOCKET_H */

arch/sh/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* __ASM_SH_SOCKET_H */

arch/sparc/include/asm/socket.h

@@ -50,6 +50,9 @@
 
 #define SO_MARK			0x0022
 
+#define SO_TIMESTAMPING		0x0023
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002

arch/x86/include/asm/socket.h

@@ -54,4 +54,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif /* _ASM_X86_SOCKET_H */

arch/xtensa/include/asm/socket.h

@@ -65,4 +65,7 @@
 
 #define SO_MARK			36
 
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
 #endif	/* _XTENSA_SOCKET_H */

drivers/acpi/event.c

@@ -235,11 +235,7 @@ int acpi_bus_generate_netlink_event(const char *device_class,
 		return result;
 	}
 
-	result =
 	genlmsg_multicast(skb, 0, acpi_event_mcgrp.id, GFP_ATOMIC);
-	if (result)
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Failed to send a Genetlink message!\n"));
 	return 0;
 }
 

drivers/atm/firestream.c

@@ -1690,17 +1690,17 @@ static int __devinit fs_init (struct fs_dev *dev)
 		  | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */
 		  | (1 * SARMODE0_INTMODE_READCLEAR)
 		  | (1 * SARMODE0_CWRE)
-		  | IS_FS50(dev)?SARMODE0_PRPWT_FS50_5: 
+		  | (IS_FS50(dev) ? SARMODE0_PRPWT_FS50_5:
-		                 SARMODE0_PRPWT_FS155_3
+			  SARMODE0_PRPWT_FS155_3)
 		  | (1 * SARMODE0_CALSUP_1)
-		  | IS_FS50 (dev)?(0
+		  | (IS_FS50(dev) ? (0
 				   | SARMODE0_RXVCS_32
 				   | SARMODE0_ABRVCS_32 
 				   | SARMODE0_TXVCS_32):
 		                  (0
 				   | SARMODE0_RXVCS_1k
 				   | SARMODE0_ABRVCS_1k 
-				   | SARMODE0_TXVCS_1k));
+				   | SARMODE0_TXVCS_1k)));
 
 	/* 10ms * 100 is 1 second. That should be enough, as AN3:9 says it takes
 	   1ms. */

drivers/atm/iphase.c

@@ -977,9 +977,7 @@ static void xdump( u_char*  cp, int  length, char*  prefix )
             else
                 pBuf += sprintf( pBuf, "." );
                 }
-        sprintf( pBuf, "\n" );
+        printk("%s\n", prntBuf);
-        // SPrint(prntBuf);
-        printk(prntBuf);
         count += col;
         pBuf = prntBuf;
     }

drivers/atm/solos-attrlist.c

@@ -0,0 +1,70 @@
+SOLOS_ATTR_RO(DriverVersion)
+SOLOS_ATTR_RO(APIVersion)
+SOLOS_ATTR_RO(FirmwareVersion)
+// SOLOS_ATTR_RO(DspVersion)
+// SOLOS_ATTR_RO(CommonHandshake)
+SOLOS_ATTR_RO(Connected)
+SOLOS_ATTR_RO(OperationalMode)
+SOLOS_ATTR_RO(State)
+SOLOS_ATTR_RO(Watchdog)
+SOLOS_ATTR_RO(OperationProgress)
+SOLOS_ATTR_RO(LastFailed)
+SOLOS_ATTR_RO(TxBitRate)
+SOLOS_ATTR_RO(RxBitRate)
+// SOLOS_ATTR_RO(DeltACTATPds)
+// SOLOS_ATTR_RO(DeltACTATPus)
+SOLOS_ATTR_RO(TxATTNDR)
+SOLOS_ATTR_RO(RxATTNDR)
+SOLOS_ATTR_RO(AnnexType)
+SOLOS_ATTR_RO(GeneralFailure)
+SOLOS_ATTR_RO(InterleaveDpDn)
+SOLOS_ATTR_RO(InterleaveDpUp)
+SOLOS_ATTR_RO(RSCorrectedErrorsDn)
+SOLOS_ATTR_RO(RSUnCorrectedErrorsDn)
+SOLOS_ATTR_RO(RSCorrectedErrorsUp)
+SOLOS_ATTR_RO(RSUnCorrectedErrorsUp)
+SOLOS_ATTR_RO(InterleaveRDn)
+SOLOS_ATTR_RO(InterleaveRUp)
+SOLOS_ATTR_RO(ShowtimeStart)
+SOLOS_ATTR_RO(ATURVendor)
+SOLOS_ATTR_RO(ATUCCountry)
+SOLOS_ATTR_RO(ATURANSIRev)
+SOLOS_ATTR_RO(ATURANSISTD)
+SOLOS_ATTR_RO(ATUCANSIRev)
+SOLOS_ATTR_RO(ATUCANSIId)
+SOLOS_ATTR_RO(ATUCANSISTD)
+SOLOS_ATTR_RO(DataBoost)
+SOLOS_ATTR_RO(LocalITUCountryCode)
+SOLOS_ATTR_RO(LocalSEF)
+SOLOS_ATTR_RO(LocalEndLOS)
+SOLOS_ATTR_RO(LocalSNRMargin)
+SOLOS_ATTR_RO(LocalLineAttn)
+SOLOS_ATTR_RO(RawAttn)
+SOLOS_ATTR_RO(LocalTxPower)
+SOLOS_ATTR_RO(RemoteTxPower)
+SOLOS_ATTR_RO(RemoteSEF)
+SOLOS_ATTR_RO(RemoteLOS)
+SOLOS_ATTR_RO(RemoteLineAttn)
+SOLOS_ATTR_RO(RemoteSNRMargin)
+SOLOS_ATTR_RO(LineUpCount)
+SOLOS_ATTR_RO(SRACnt)
+SOLOS_ATTR_RO(SRACntUp)
+SOLOS_ATTR_RO(ProfileStatus)
+SOLOS_ATTR_RW(Action)
+SOLOS_ATTR_RW(ActivateLine)
+SOLOS_ATTR_RO(LineStatus)
+SOLOS_ATTR_RW(HostControl)
+SOLOS_ATTR_RW(AutoStart)
+SOLOS_ATTR_RW(Failsafe)
+SOLOS_ATTR_RW(ShowtimeLed)
+SOLOS_ATTR_RW(Retrain)
+SOLOS_ATTR_RW(Defaults)
+SOLOS_ATTR_RW(LineMode)
+SOLOS_ATTR_RW(Profile)
+SOLOS_ATTR_RW(DetectNoise)
+SOLOS_ATTR_RO(SupportedAnnexes)
+SOLOS_ATTR_RO(Status)
+SOLOS_ATTR_RO(TotalStart)
+SOLOS_ATTR_RO(RecentShowtimeStart)
+SOLOS_ATTR_RO(TotalRxBlocks)
+SOLOS_ATTR_RO(TotalTxBlocks)

drivers/block/aoe/aoenet.c

@@ -151,7 +151,7 @@ exit:
 	return 0;
 }
 
-static struct packet_type aoe_pt = {
+static struct packet_type aoe_pt __read_mostly = {
 	.type = __constant_htons(ETH_P_AOE),
 	.func = aoenet_rcv,
 };

drivers/bluetooth/bfusb.c

@@ -257,7 +257,6 @@ static inline int bfusb_recv_block(struct bfusb_data *data, int hdr, unsigned ch
 
 	if (hdr & 0x10) {
 		BT_ERR("%s error in block", data->hdev->name);
-		if (data->reassembly)
 		kfree_skb(data->reassembly);
 		data->reassembly = NULL;
 		return -EIO;

drivers/bluetooth/bt3c_cs.c

@@ -359,9 +359,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 			BT_ERR("Very strange (stat=0x%04x)", stat);
 		} else if ((stat & 0xff) != 0xff) {
 			if (stat & 0x0020) {
-				int stat = bt3c_read(iobase, 0x7002) & 0x10;
+				int status = bt3c_read(iobase, 0x7002) & 0x10;
 				BT_INFO("%s: Antenna %s", info->hdev->name,
-							stat ? "out" : "in");
+							status ? "out" : "in");
 			}
 			if (stat & 0x0001)
 				bt3c_receive(info);

drivers/bluetooth/btusb.c

@@ -35,7 +35,7 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "0.4"
+#define VERSION "0.5"
 
 static int ignore_dga;
 static int ignore_csr;
@@ -171,6 +171,7 @@ struct btusb_data {
 
 	__u8 cmdreq_type;
 
+	unsigned int sco_num;
 	int isoc_altsetting;
 	int suspend_count;
 };
@@ -496,11 +497,23 @@ static int btusb_open(struct hci_dev *hdev)
 		return 0;
 
 	err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
+	if (err < 0)
+		goto failed;
+
+	err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
 	if (err < 0) {
-		clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->intr_anchor);
-		clear_bit(HCI_RUNNING, &hdev->flags);
+		goto failed;
 	}
 
+	set_bit(BTUSB_BULK_RUNNING, &data->flags);
+	btusb_submit_bulk_urb(hdev, GFP_KERNEL);
+
+	return 0;
+
+failed:
+	clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+	clear_bit(HCI_RUNNING, &hdev->flags);
 	return err;
 }
 
@@ -655,20 +668,11 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
 
 	BT_DBG("%s evt %d", hdev->name, evt);
 
-	if (hdev->conn_hash.acl_num > 0) {
+	if (hdev->conn_hash.sco_num != data->sco_num) {
-		if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+		data->sco_num = hdev->conn_hash.sco_num;
-			if (btusb_submit_bulk_urb(hdev, GFP_ATOMIC) < 0)
-				clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-			else
-				btusb_submit_bulk_urb(hdev, GFP_ATOMIC);
-		}
-	} else {
-		clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-		usb_unlink_anchored_urbs(&data->bulk_anchor);
-	}
-
 		schedule_work(&data->work);
 	}
+}
 
 static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
 {
@@ -982,9 +986,11 @@ static int btusb_resume(struct usb_interface *intf)
 	}
 
 	if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
-		if (btusb_submit_bulk_urb(hdev, GFP_NOIO) < 0)
+		err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
+		if (err < 0) {
 			clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-		else
+			return err;
+		} else
 			btusb_submit_bulk_urb(hdev, GFP_NOIO);
 	}
 

drivers/bluetooth/hci_h4.c

@@ -102,7 +102,6 @@ static int h4_close(struct hci_uart *hu)
 
 	skb_queue_purge(&h4->txq);
 
-	if (h4->rx_skb)
 	kfree_skb(h4->rx_skb);
 
 	hu->priv = NULL;

drivers/bluetooth/hci_ll.c

@@ -163,7 +163,6 @@ static int ll_close(struct hci_uart *hu)
 	skb_queue_purge(&ll->tx_wait_q);
 	skb_queue_purge(&ll->txq);
 
-	if (ll->rx_skb)
 	kfree_skb(ll->rx_skb);
 
 	hu->priv = NULL;

drivers/char/pcmcia/synclink_cs.c

@@ -4311,10 +4311,17 @@ static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
 	dev->stats.rx_bytes += size;
 
 	netif_rx(skb);
-
-	dev->last_rx = jiffies;
 }
 
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
 /**
  * called by device driver when adding device instance
  * do generic HDLC initialization
@@ -4341,10 +4348,7 @@ static int hdlcdev_init(MGSLPC_INFO *info)
 	dev->irq       = info->irq_level;
 
 	/* network layer callbacks and settings */
-	dev->do_ioctl       = hdlcdev_ioctl;
+	dev->netdev_ops	    = &hdlcdev_ops;
-	dev->open           = hdlcdev_open;
-	dev->stop           = hdlcdev_close;
-	dev->tx_timeout     = hdlcdev_tx_timeout;
 	dev->watchdog_timeo = 10 * HZ;
 	dev->tx_queue_len   = 50;
 

drivers/char/synclink.c

@@ -8007,10 +8007,17 @@ static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
 	dev->stats.rx_bytes += size;
 
 	netif_rx(skb);
-
-	dev->last_rx = jiffies;
 }
 
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
 /**
  * called by device driver when adding device instance
  * do generic HDLC initialization
@@ -8038,10 +8045,7 @@ static int hdlcdev_init(struct mgsl_struct *info)
 	dev->dma       = info->dma_level;
 
 	/* network layer callbacks and settings */
-	dev->do_ioctl       = hdlcdev_ioctl;
+	dev->netdev_ops     = &hdlcdev_ops;
-	dev->open           = hdlcdev_open;
-	dev->stop           = hdlcdev_close;
-	dev->tx_timeout     = hdlcdev_tx_timeout;
 	dev->watchdog_timeo = 10 * HZ;
 	dev->tx_queue_len   = 50;
 

drivers/char/synclink_gt.c

@@ -1763,10 +1763,17 @@ static void hdlcdev_rx(struct slgt_info *info, char *buf, int size)
 	dev->stats.rx_bytes += size;
 
 	netif_rx(skb);
-
-	dev->last_rx = jiffies;
 }
 
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
 /**
  * called by device driver when adding device instance
  * do generic HDLC initialization
@@ -1794,10 +1801,7 @@ static int hdlcdev_init(struct slgt_info *info)
 	dev->irq       = info->irq_level;
 
 	/* network layer callbacks and settings */
-	dev->do_ioctl       = hdlcdev_ioctl;
+	dev->netdev_ops	    = &hdlcdev_ops;
-	dev->open           = hdlcdev_open;
-	dev->stop           = hdlcdev_close;
-	dev->tx_timeout     = hdlcdev_tx_timeout;
 	dev->watchdog_timeo = 10 * HZ;
 	dev->tx_queue_len   = 50;
 

drivers/char/synclinkmp.c

@@ -1907,10 +1907,17 @@ static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
 	dev->stats.rx_bytes += size;
 
 	netif_rx(skb);
-
-	dev->last_rx = jiffies;
 }
 
+static const struct net_device_ops hdlcdev_ops = {
+	.ndo_open       = hdlcdev_open,
+	.ndo_stop       = hdlcdev_close,
+	.ndo_change_mtu = hdlc_change_mtu,
+	.ndo_start_xmit = hdlc_start_xmit,
+	.ndo_do_ioctl   = hdlcdev_ioctl,
+	.ndo_tx_timeout = hdlcdev_tx_timeout,
+};
+
 /**
  * called by device driver when adding device instance
  * do generic HDLC initialization
@@ -1938,10 +1945,7 @@ static int hdlcdev_init(SLMP_INFO *info)
 	dev->irq       = info->irq_level;
 
 	/* network layer callbacks and settings */
-	dev->do_ioctl       = hdlcdev_ioctl;
+	dev->netdev_ops	    = &hdlcdev_ops;
-	dev->open           = hdlcdev_open;
-	dev->stop           = hdlcdev_close;
-	dev->tx_timeout     = hdlcdev_tx_timeout;
 	dev->watchdog_timeo = 10 * HZ;
 	dev->tx_queue_len   = 50;
 

drivers/connector/cn_queue.c

@@ -31,6 +31,48 @@
 #include <linux/connector.h>
 #include <linux/delay.h>
 
+
+/*
+ * This job is sent to the kevent workqueue.
+ * While no event is once sent to any callback, the connector workqueue
+ * is not created to avoid a useless waiting kernel task.
+ * Once the first event is received, we create this dedicated workqueue which
+ * is necessary because the flow of data can be high and we don't want
+ * to encumber keventd with that.
+ */
+static void cn_queue_create(struct work_struct *work)
+{
+	struct cn_queue_dev *dev;
+
+	dev = container_of(work, struct cn_queue_dev, wq_creation);
+
+	dev->cn_queue = create_singlethread_workqueue(dev->name);
+	/* If we fail, we will use keventd for all following connector jobs */
+	WARN_ON(!dev->cn_queue);
+}
+
+/*
+ * Queue a data sent to a callback.
+ * If the connector workqueue is already created, we queue the job on it.
+ * Otherwise, we queue the job to kevent and queue the connector workqueue
+ * creation too.
+ */
+int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work)
+{
+	struct cn_queue_dev *pdev = cbq->pdev;
+
+	if (likely(pdev->cn_queue))
+		return queue_work(pdev->cn_queue, work);
+
+	/* Don't create the connector workqueue twice */
+	if (atomic_inc_return(&pdev->wq_requested) == 1)
+		schedule_work(&pdev->wq_creation);
+	else
+		atomic_dec(&pdev->wq_requested);
+
+	return schedule_work(work);
+}
+
 void cn_queue_wrapper(struct work_struct *work)
 {
 	struct cn_callback_entry *cbq =
@@ -65,6 +107,9 @@ static struct cn_callback_entry *cn_queue_alloc_callback_entry(char *name, struc
 
 static void cn_queue_free_callback(struct cn_callback_entry *cbq)
 {
+	/* The first jobs have been sent to kevent, flush them too */
+	flush_scheduled_work();
+	if (cbq->pdev->cn_queue)
 		flush_workqueue(cbq->pdev->cn_queue);
 
 	kfree(cbq);
@@ -143,14 +188,11 @@ struct cn_queue_dev *cn_queue_alloc_dev(char *name, struct sock *nls)
 	atomic_set(&dev->refcnt, 0);
 	INIT_LIST_HEAD(&dev->queue_list);
 	spin_lock_init(&dev->queue_lock);
+	init_waitqueue_head(&dev->wq_created);
 
 	dev->nls = nls;
 
-	dev->cn_queue = create_singlethread_workqueue(dev->name);
+	INIT_WORK(&dev->wq_creation, cn_queue_create);
-	if (!dev->cn_queue) {
-		kfree(dev);
-		return NULL;
-	}
 
 	return dev;
 }
@@ -158,9 +200,25 @@ struct cn_queue_dev *cn_queue_alloc_dev(char *name, struct sock *nls)
 void cn_queue_free_dev(struct cn_queue_dev *dev)
 {
 	struct cn_callback_entry *cbq, *n;
+	long timeout;
+	DEFINE_WAIT(wait);
 
+	/* Flush the first pending jobs queued on kevent */
+	flush_scheduled_work();
+
+	/* If the connector workqueue creation is still pending, wait for it */
+	prepare_to_wait(&dev->wq_created, &wait, TASK_UNINTERRUPTIBLE);
+	if (atomic_read(&dev->wq_requested) && !dev->cn_queue) {
+		timeout = schedule_timeout(HZ * 2);
+		if (!timeout && !dev->cn_queue)
+			WARN_ON(1);
+	}
+	finish_wait(&dev->wq_created, &wait);
+
+	if (dev->cn_queue) {
 		flush_workqueue(dev->cn_queue);
 		destroy_workqueue(dev->cn_queue);
+	}
 
 	spin_lock_bh(&dev->queue_lock);
 	list_for_each_entry_safe(cbq, n, &dev->queue_list, callback_entry)

drivers/connector/connector.c

@@ -145,8 +145,7 @@ static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), v
 				__cbq->data.ddata = data;
 				__cbq->data.destruct_data = destruct_data;
 
-				if (queue_work(dev->cbdev->cn_queue,
+				if (queue_cn_work(__cbq, &__cbq->work))
-							&__cbq->work))
 					err = 0;
 				else
 					err = -EINVAL;
@@ -163,10 +162,12 @@ static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), v
 					d->destruct_data = destruct_data;
 					d->free = __new_cbq;
 
+					__new_cbq->pdev = __cbq->pdev;
+
 					INIT_WORK(&__new_cbq->work,
 							&cn_queue_wrapper);
 
-					if (queue_work(dev->cbdev->cn_queue,
+					if (queue_cn_work(__new_cbq,
 						    &__new_cbq->work))
 						err = 0;
 					else {

drivers/infiniband/hw/amso1100/c2.c

@@ -76,7 +76,6 @@ static irqreturn_t c2_interrupt(int irq, void *dev_id);
 static void c2_tx_timeout(struct net_device *netdev);
 static int c2_change_mtu(struct net_device *netdev, int new_mtu);
 static void c2_reset(struct c2_port *c2_port);
-static struct net_device_stats *c2_get_stats(struct net_device *netdev);
 
 static struct pci_device_id c2_pci_table[] = {
 	{ PCI_DEVICE(0x18b8, 0xb001) },
@@ -349,7 +348,7 @@ static void c2_tx_clean(struct c2_port *c2_port)
 					     elem->hw_desc + C2_TXP_ADDR);
 				__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_DONE),
 					     elem->hw_desc + C2_TXP_FLAGS);
-				c2_port->netstats.tx_dropped++;
+				c2_port->netdev->stats.tx_dropped++;
 				break;
 			} else {
 				__raw_writew(0,
@@ -457,7 +456,7 @@ static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem)
 		     elem->hw_desc + C2_RXP_FLAGS);
 
 	pr_debug("packet dropped\n");
-	c2_port->netstats.rx_dropped++;
+	c2_port->netdev->stats.rx_dropped++;
 }
 
 static void c2_rx_interrupt(struct net_device *netdev)
@@ -532,8 +531,8 @@ static void c2_rx_interrupt(struct net_device *netdev)
 		netif_rx(skb);
 
 		netdev->last_rx = jiffies;
-		c2_port->netstats.rx_packets++;
+		netdev->stats.rx_packets++;
-		c2_port->netstats.rx_bytes += buflen;
+		netdev->stats.rx_bytes += buflen;
 	}
 
 	/* Save where we left off */
@@ -797,8 +796,8 @@ static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
 		     elem->hw_desc + C2_TXP_FLAGS);
 
-	c2_port->netstats.tx_packets++;
+	netdev->stats.tx_packets++;
-	c2_port->netstats.tx_bytes += maplen;
+	netdev->stats.tx_bytes += maplen;
 
 	/* Loop thru additional data fragments and queue them */
 	if (skb_shinfo(skb)->nr_frags) {
@@ -823,8 +822,8 @@ static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 			__raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
 				     elem->hw_desc + C2_TXP_FLAGS);
 
-			c2_port->netstats.tx_packets++;
+			netdev->stats.tx_packets++;
-			c2_port->netstats.tx_bytes += maplen;
+			netdev->stats.tx_bytes += maplen;
 		}
 	}
 
@@ -845,13 +844,6 @@ static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	return NETDEV_TX_OK;
 }
 
-static struct net_device_stats *c2_get_stats(struct net_device *netdev)
-{
-	struct c2_port *c2_port = netdev_priv(netdev);
-
-	return &c2_port->netstats;
-}
-
 static void c2_tx_timeout(struct net_device *netdev)
 {
 	struct c2_port *c2_port = netdev_priv(netdev);
@@ -880,6 +872,16 @@ static int c2_change_mtu(struct net_device *netdev, int new_mtu)
 	return ret;
 }
 
+static const struct net_device_ops c2_netdev = {
+	.ndo_open 		= c2_up,
+	.ndo_stop 		= c2_down,
+	.ndo_start_xmit		= c2_xmit_frame,
+	.ndo_tx_timeout		= c2_tx_timeout,
+	.ndo_change_mtu		= c2_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /* Initialize network device */
 static struct net_device *c2_devinit(struct c2_dev *c2dev,
 				     void __iomem * mmio_addr)
@@ -894,12 +896,7 @@ static struct net_device *c2_devinit(struct c2_dev *c2dev,
 
 	SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev);
 
-	netdev->open = c2_up;
+	netdev->netdev_ops = &c2_netdev;
-	netdev->stop = c2_down;
-	netdev->hard_start_xmit = c2_xmit_frame;
-	netdev->get_stats = c2_get_stats;
-	netdev->tx_timeout = c2_tx_timeout;
-	netdev->change_mtu = c2_change_mtu;
 	netdev->watchdog_timeo = C2_TX_TIMEOUT;
 	netdev->irq = c2dev->pcidev->irq;
 

drivers/infiniband/hw/amso1100/c2.h

@@ -369,8 +369,6 @@ struct c2_port {
 	unsigned long mem_size;
 
 	u32 rx_buf_size;
-
-	struct net_device_stats netstats;
 };
 
 /*

drivers/infiniband/hw/amso1100/c2_provider.c

@@ -708,26 +708,27 @@ static int c2_pseudo_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 static int c2_pseudo_change_mtu(struct net_device *netdev, int new_mtu)
 {
-	int ret = 0;
-
 	if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
 		return -EINVAL;
 
 	netdev->mtu = new_mtu;
 
 	/* TODO: Tell rnic about new rmda interface mtu */
-	return ret;
+	return 0;
 }
 
+static const struct net_device_ops c2_pseudo_netdev_ops = {
+	.ndo_open 		= c2_pseudo_up,
+	.ndo_stop 		= c2_pseudo_down,
+	.ndo_start_xmit 	= c2_pseudo_xmit_frame,
+	.ndo_change_mtu 	= c2_pseudo_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static void setup(struct net_device *netdev)
 {
-	netdev->open = c2_pseudo_up;
+	netdev->netdev_ops = &c2_pseudo_netdev_ops;
-	netdev->stop = c2_pseudo_down;
+
-	netdev->hard_start_xmit = c2_pseudo_xmit_frame;
-	netdev->get_stats = NULL;
-	netdev->tx_timeout = NULL;
-	netdev->set_mac_address = NULL;
-	netdev->change_mtu = c2_pseudo_change_mtu;
 	netdev->watchdog_timeo = 0;
 	netdev->type = ARPHRD_ETHER;
 	netdev->mtu = 1500;
@@ -735,7 +736,6 @@ static void setup(struct net_device *netdev)
 	netdev->addr_len = ETH_ALEN;
 	netdev->tx_queue_len = 0;
 	netdev->flags |= IFF_NOARP;
-	return;
 }
 
 static struct net_device *c2_pseudo_netdev_init(struct c2_dev *c2dev)

drivers/infiniband/hw/cxgb3/cxio_hal.c

@@ -701,6 +701,9 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry,
 	u32 stag_idx;
 	u32 wptr;
 
+	if (rdev_p->flags)
+		return -EIO;
+
 	stag_state = stag_state > 0;
 	stag_idx = (*stag) >> 8;
 

drivers/infiniband/hw/cxgb3/cxio_hal.h

@@ -111,6 +111,8 @@ struct cxio_rdev {
 	struct gen_pool *rqt_pool;
 	struct list_head entry;
 	struct ch_embedded_info fw_info;
+	u32	flags;
+#define	CXIO_ERROR_FATAL	1
 };
 
 static inline int cxio_num_stags(struct cxio_rdev *rdev_p)

drivers/infiniband/hw/cxgb3/iwch.c

@@ -51,13 +51,15 @@ cxgb3_cpl_handler_func t3c_handlers[NUM_CPL_CMDS];
 
 static void open_rnic_dev(struct t3cdev *);
 static void close_rnic_dev(struct t3cdev *);
+static void iwch_err_handler(struct t3cdev *, u32, u32);
 
 struct cxgb3_client t3c_client = {
 	.name = "iw_cxgb3",
 	.add = open_rnic_dev,
 	.remove = close_rnic_dev,
 	.handlers = t3c_handlers,
-	.redirect = iwch_ep_redirect
+	.redirect = iwch_ep_redirect,
+	.err_handler = iwch_err_handler
 };
 
 static LIST_HEAD(dev_list);
@@ -160,6 +162,17 @@ static void close_rnic_dev(struct t3cdev *tdev)
 	mutex_unlock(&dev_mutex);
 }
 
+static void iwch_err_handler(struct t3cdev *tdev, u32 status, u32 error)
+{
+	struct cxio_rdev *rdev = tdev->ulp;
+
+	if (status == OFFLOAD_STATUS_DOWN)
+		rdev->flags = CXIO_ERROR_FATAL;
+
+	return;
+
+}
+
 static int __init iwch_init_module(void)
 {
 	int err;

drivers/infiniband/hw/nes/nes_hw.c

@@ -2550,7 +2550,7 @@ static void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic
 {
 	struct nes_vnic *nesvnic = container_of(cq, struct nes_vnic, nic_cq);
 
-	netif_rx_schedule(&nesvnic->napi);
+	napi_schedule(&nesvnic->napi);
 }
 
 

drivers/infiniband/hw/nes/nes_nic.c

@@ -111,7 +111,7 @@ static int nes_netdev_poll(struct napi_struct *napi, int budget)
 	nes_nic_ce_handler(nesdev, nescq);
 
 	if (nescq->cqes_pending == 0) {
-		netif_rx_complete(napi);
+		napi_complete(napi);
 		/* clear out completed cqes and arm */
 		nes_write32(nesdev->regs+NES_CQE_ALLOC, NES_CQE_ALLOC_NOTIFY_NEXT |
 				nescq->cq_number | (nescq->cqe_allocs_pending << 16));
@@ -1551,6 +1551,19 @@ static void nes_netdev_vlan_rx_register(struct net_device *netdev, struct vlan_g
 	spin_unlock_irqrestore(&nesadapter->phy_lock, flags);
 }
 
+static const struct net_device_ops nes_netdev_ops = {
+	.ndo_open 		= nes_netdev_open,
+	.ndo_stop		= nes_netdev_stop,
+	.ndo_start_xmit 	= nes_netdev_start_xmit,
+	.ndo_get_stats		= nes_netdev_get_stats,
+	.ndo_tx_timeout 	= nes_netdev_tx_timeout,
+	.ndo_set_mac_address	= nes_netdev_set_mac_address,
+	.ndo_set_multicast_list = nes_netdev_set_multicast_list,
+	.ndo_change_mtu		= nes_netdev_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_vlan_rx_register 	= nes_netdev_vlan_rx_register,
+};
 
 /**
  * nes_netdev_init - initialize network device
@@ -1559,7 +1572,7 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 		void __iomem *mmio_addr)
 {
 	u64 u64temp;
-	struct nes_vnic *nesvnic = NULL;
+	struct nes_vnic *nesvnic;
 	struct net_device *netdev;
 	struct nic_qp_map *curr_qp_map;
 	u32 u32temp;
@@ -1571,22 +1584,12 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 		printk(KERN_ERR PFX "nesvnic etherdev alloc failed");
 		return NULL;
 	}
+	nesvnic = netdev_priv(netdev);
 
 	nes_debug(NES_DBG_INIT, "netdev = %p, %s\n", netdev, netdev->name);
 
 	SET_NETDEV_DEV(netdev, &nesdev->pcidev->dev);
 
-	nesvnic = netdev_priv(netdev);
-	memset(nesvnic, 0, sizeof(*nesvnic));
-
-	netdev->open = nes_netdev_open;
-	netdev->stop = nes_netdev_stop;
-	netdev->hard_start_xmit = nes_netdev_start_xmit;
-	netdev->get_stats = nes_netdev_get_stats;
-	netdev->tx_timeout = nes_netdev_tx_timeout;
-	netdev->set_mac_address = nes_netdev_set_mac_address;
-	netdev->set_multicast_list = nes_netdev_set_multicast_list;
-	netdev->change_mtu = nes_netdev_change_mtu;
 	netdev->watchdog_timeo = NES_TX_TIMEOUT;
 	netdev->irq = nesdev->pcidev->irq;
 	netdev->mtu = ETH_DATA_LEN;
@@ -1594,11 +1597,13 @@ struct net_device *nes_netdev_init(struct nes_device *nesdev,
 	netdev->addr_len = ETH_ALEN;
 	netdev->type = ARPHRD_ETHER;
 	netdev->features = NETIF_F_HIGHDMA;
+	netdev->netdev_ops = &nes_netdev_ops;
 	netdev->ethtool_ops = &nes_ethtool_ops;
 	netif_napi_add(netdev, &nesvnic->napi, nes_netdev_poll, 128);
 	nes_debug(NES_DBG_INIT, "Enabling VLAN Insert/Delete.\n");
 	netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 	netdev->vlan_rx_register = nes_netdev_vlan_rx_register;
+	netdev->features |= NETIF_F_LLTX;
 
 	/* Fill in the port structure */
 	nesvnic->netdev = netdev;

drivers/infiniband/ulp/ipoib/ipoib_ib.c

@@ -446,11 +446,11 @@ poll_more:
 		if (dev->features & NETIF_F_LRO)
 			lro_flush_all(&priv->lro.lro_mgr);
 
-		netif_rx_complete(napi);
+		napi_complete(napi);
 		if (unlikely(ib_req_notify_cq(priv->recv_cq,
 					      IB_CQ_NEXT_COMP |
 					      IB_CQ_REPORT_MISSED_EVENTS)) &&
-		    netif_rx_reschedule(napi))
+		    napi_reschedule(napi))
 			goto poll_more;
 	}
 
@@ -462,7 +462,7 @@ void ipoib_ib_completion(struct ib_cq *cq, void *dev_ptr)
 	struct net_device *dev = dev_ptr;
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 
-	netif_rx_schedule(&priv->napi);
+	napi_schedule(&priv->napi);
 }
 
 static void drain_tx_cq(struct net_device *dev)

drivers/infiniband/ulp/ipoib/ipoib_main.c

@@ -1021,18 +1021,22 @@ static void ipoib_lro_setup(struct ipoib_dev_priv *priv)
 	priv->lro.lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
 }
 
+static const struct net_device_ops ipoib_netdev_ops = {
+	.ndo_open		 = ipoib_open,
+	.ndo_stop		 = ipoib_stop,
+	.ndo_change_mtu		 = ipoib_change_mtu,
+	.ndo_start_xmit	 	 = ipoib_start_xmit,
+	.ndo_tx_timeout		 = ipoib_timeout,
+	.ndo_set_multicast_list	 = ipoib_set_mcast_list,
+	.ndo_neigh_setup	 = ipoib_neigh_setup_dev,
+};
+
 static void ipoib_setup(struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 
-	dev->open		 = ipoib_open;
+	dev->netdev_ops		 = &ipoib_netdev_ops;
-	dev->stop		 = ipoib_stop;
-	dev->change_mtu		 = ipoib_change_mtu;
-	dev->hard_start_xmit	 = ipoib_start_xmit;
-	dev->tx_timeout		 = ipoib_timeout;
 	dev->header_ops		 = &ipoib_header_ops;
-	dev->set_multicast_list	 = ipoib_set_mcast_list;
-	dev->neigh_setup	 = ipoib_neigh_setup_dev;
 
 	ipoib_set_ethtool_ops(dev);
 

drivers/isdn/act2000/act2000_isa.c

@@ -257,9 +257,9 @@ act2000_isa_receive(act2000_card *card)
 					printk(KERN_WARNING
 					       "act2000_isa_receive: Invalid CAPI msg\n");
 					{
-						int i; __u8 *p; __u8 *c; __u8 tmp[30];
+						int i; __u8 *p; __u8 *t; __u8 tmp[30];
-						for (i = 0, p = (__u8 *)&card->idat.isa.rcvhdr, c = tmp; i < 8; i++)
+						for (i = 0, p = (__u8 *)&card->idat.isa.rcvhdr, t = tmp; i < 8; i++)
-							c += sprintf(c, "%02x ", *(p++));
+							t += sprintf(t, "%02x ", *(p++));
 						printk(KERN_WARNING "act2000_isa_receive: %s\n", tmp);
 					}
 				}

drivers/isdn/capi/capi.c

@@ -277,7 +277,7 @@ static void capiminor_free(struct capiminor *mp)
 	list_del(&mp->list);
 	write_unlock_irqrestore(&capiminor_list_lock, flags);
 
-	if (mp->ttyskb) kfree_skb(mp->ttyskb);
+	kfree_skb(mp->ttyskb);
 	mp->ttyskb = NULL;
 	skb_queue_purge(&mp->inqueue);
 	skb_queue_purge(&mp->outqueue);

drivers/isdn/capi/kcapi_proc.c

@@ -239,6 +239,7 @@ static const struct file_operations proc_applstats_ops = {
 // ---------------------------------------------------------------------------
 
 static void *capi_driver_start(struct seq_file *seq, loff_t *pos)
+	__acquires(&capi_drivers_list_lock)
 {
 	read_lock(&capi_drivers_list_lock);
 	return seq_list_start(&capi_drivers, *pos);
@@ -250,6 +251,7 @@ static void *capi_driver_next(struct seq_file *seq, void *v, loff_t *pos)
 }
 
 static void capi_driver_stop(struct seq_file *seq, void *v)
+	__releases(&capi_drivers_list_lock)
 {
 	read_unlock(&capi_drivers_list_lock);
 }

drivers/isdn/gigaset/Kconfig

@@ -1,5 +1,5 @@
 menuconfig ISDN_DRV_GIGASET
-	tristate "Siemens Gigaset support (isdn)"
+	tristate "Siemens Gigaset support"
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -11,11 +11,11 @@ menuconfig ISDN_DRV_GIGASET
 	  one of the connection specific parts that follow.
 	  This will build a module called "gigaset".
 
-if ISDN_DRV_GIGASET!=n
+if ISDN_DRV_GIGASET
 
 config GIGASET_BASE
 	tristate "Gigaset base station support"
-	depends on ISDN_DRV_GIGASET && USB
+	depends on USB
 	help
 	  Say M here if you want to use the USB interface of the Gigaset
 	  base for connection to your system.
@@ -23,7 +23,7 @@ config GIGASET_BASE
 
 config GIGASET_M105
 	tristate "Gigaset M105 support"
-	depends on ISDN_DRV_GIGASET && USB
+	depends on USB
 	help
 	  Say M here if you want to connect to the Gigaset base via DECT
 	  using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
@@ -31,7 +31,6 @@ config GIGASET_M105
 
 config GIGASET_M101
 	tristate "Gigaset M101 support"
-	depends on ISDN_DRV_GIGASET
 	help
 	  Say M here if you want to connect to the Gigaset base via DECT
 	  using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
@@ -48,7 +47,6 @@ config GIGASET_UNDOCREQ
 	help
 	  This enables support for USB requests we only know from
 	  reverse engineering (currently M105 only). If you need
-	  features like configuration mode of M105, say yes. If you
+	  features like configuration mode of M105, say yes.
-	  care about your device, say no.
 
-endif # ISDN_DRV_GIGASET != n
+endif # ISDN_DRV_GIGASET

drivers/isdn/gigaset/usb-gigaset.c

@@ -278,17 +278,17 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
 				  unsigned new_state)
 {
-	return -EINVAL;
+	return -ENOTTY;
 }
 
 static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
 {
-	return -EINVAL;
+	return -ENOTTY;
 }
 
 static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
 {
-	return -EINVAL;
+	return -ENOTTY;
 }
 #endif
 
@@ -577,7 +577,7 @@ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
 	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41,
 			       0, 0, &buf, 6, 2000);
 #else
-	return -EINVAL;
+	return -ENOTTY;
 #endif
 }
 

drivers/isdn/hardware/eicon/debug.c

@@ -1198,7 +1198,7 @@ int SuperTraceASSIGN (void* AdapterHandle, byte* data) {
         pC->xbuffer[5] = (byte)(rx_dma_magic >>  8);
         pC->xbuffer[6] = (byte)(rx_dma_magic >> 16);
         pC->xbuffer[7] = (byte)(rx_dma_magic >> 24);
-        pC->xbuffer[8] = (byte)DIVA_MAX_MANAGEMENT_TRANSFER_SIZE;
+	pC->xbuffer[8] = (byte)(DIVA_MAX_MANAGEMENT_TRANSFER_SIZE & 0xFF);
         pC->xbuffer[9] = (byte)(DIVA_MAX_MANAGEMENT_TRANSFER_SIZE >> 8);
         pC->xbuffer[10] = 0;
 

drivers/isdn/hardware/eicon/message.c

@@ -1194,7 +1194,8 @@ static char hex_digit_table[0x10] =
 /* translation function for each message                            */
 /*------------------------------------------------------------------*/
 
-byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ch;
   word i;
@@ -1411,7 +1412,8 @@ byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return 2;
 }
 
-byte connect_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word i, Info;
   word Reject;
@@ -1567,13 +1569,15 @@ byte connect_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return 1;
 }
 
-byte connect_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte connect_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			  PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   dbug(1,dprintf("connect_a_res"));
   return false;
 }
 
-byte disconnect_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte disconnect_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			   PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   word Info;
   word i;
@@ -1628,7 +1632,8 @@ byte disconnect_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plc
   return false;
 }
 
-byte disconnect_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte disconnect_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			   PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   dbug(1,dprintf("disconnect_res"));
   if(plci)
@@ -1655,7 +1660,8 @@ byte disconnect_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plc
   return 0;
 }
 
-byte listen_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte listen_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+		       PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word Info;
   byte i;
@@ -1704,7 +1710,8 @@ byte listen_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, A
   return false;
 }
 
-byte info_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte info_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+		     PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   word i;
   API_PARSE * ai;
@@ -1813,13 +1820,15 @@ byte info_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APP
   return false;
 }
 
-byte info_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte info_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+		     PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   dbug(1,dprintf("info_res"));
   return false;
 }
 
-byte alert_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte alert_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+		      PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   word Info;
   byte ret;
@@ -1849,7 +1858,8 @@ byte alert_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, AP
   return ret;
 }
 
-byte facility_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte facility_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			 PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   word Info = 0;
   word i    = 0;
@@ -2599,13 +2609,15 @@ byte facility_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return false;
 }
 
-byte facility_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte facility_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			 PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   dbug(1,dprintf("facility_res"));
   return false;
 }
 
-byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			   PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word Info = 0;
   byte req;
@@ -2839,7 +2851,8 @@ byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plc
   return false;
 }
 
-byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			   PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ncci;
   API_PARSE * ncpi;
@@ -2954,7 +2967,8 @@ byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plc
   return false;
 }
 
-byte connect_b3_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_b3_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			     PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ncci;
 
@@ -2974,7 +2988,8 @@ byte connect_b3_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * p
   return false;
 }
 
-byte disconnect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte disconnect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			      PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word Info;
   word ncci;
@@ -3030,7 +3045,8 @@ byte disconnect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   *
   return false;
 }
 
-byte disconnect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte disconnect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			      PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ncci;
   word i;
@@ -3086,7 +3102,8 @@ byte disconnect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   *
   return false;
 }
 
-byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   NCCI   *ncci_ptr;
   DATA_B3_DESC   *data;
@@ -3163,7 +3180,8 @@ byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return false;
 }
 
-byte data_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte data_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word n;
   word ncci;
@@ -3196,7 +3214,8 @@ byte data_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return false;
 }
 
-byte reset_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte reset_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			 PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word Info;
   word ncci;
@@ -3237,7 +3256,8 @@ byte reset_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return false;
 }
 
-byte reset_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte reset_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			 PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ncci;
 
@@ -3261,7 +3281,8 @@ byte reset_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci,
   return false;
 }
 
-byte connect_b3_t90_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * parms)
+static byte connect_b3_t90_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+				 PLCI *plci, APPL *appl, API_PARSE *parms)
 {
   word ncci;
   API_PARSE * ncpi;
@@ -3295,7 +3316,8 @@ byte connect_b3_t90_a_res(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI
 }
 
 
-byte select_b_req(dword Id, word Number, DIVA_CAPI_ADAPTER   * a, PLCI   * plci, APPL   * appl, API_PARSE * msg)
+static byte select_b_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
+			 PLCI *plci, APPL *appl, API_PARSE *msg)
 {
   word Info=0;
   word i;
@@ -8689,7 +8711,7 @@ static word add_modem_b23 (PLCI  * plci, API_PARSE* bp_parms)
 /* send a request for the signaling entity                          */
 /*------------------------------------------------------------------*/
 
-void sig_req(PLCI   * plci, byte req, byte Id)
+static void sig_req(PLCI *plci, byte req, byte Id)
 {
   if(!plci) return;
   if(plci->adapter->adapter_disabled) return;
@@ -8789,7 +8811,7 @@ static void send_req(PLCI *plci)
   dbug(1,dprintf("send_ok"));
 }
 
-void send_data(PLCI   * plci)
+static void send_data(PLCI *plci)
 {
   DIVA_CAPI_ADAPTER   * a;
   DATA_B3_DESC   * data;

drivers/isdn/hardware/mISDN/hfcpci.c

@@ -56,8 +56,8 @@ static const char *hfcpci_revision = "2.0";
 static int HFC_cnt;
 static uint debug;
 static uint poll, tics;
-struct timer_list hfc_tl;
+static struct timer_list hfc_tl;
-u32	hfc_jiffies;
+static unsigned long hfc_jiffies;
 
 MODULE_AUTHOR("Karsten Keil");
 MODULE_LICENSE("GPL");

drivers/isdn/hardware/mISDN/hfcsusb.c

@@ -35,7 +35,7 @@
 #include <linux/mISDNhw.h>
 #include "hfcsusb.h"
 
-const char *hfcsusb_rev = "Revision: 0.3.3 (socket), 2008-11-05";
+static const char *hfcsusb_rev = "Revision: 0.3.3 (socket), 2008-11-05";
 
 static unsigned int debug;
 static int poll = DEFAULT_TRANSP_BURST_SZ;
@@ -974,7 +974,7 @@ hfcsusb_rx_frame(struct usb_fifo *fifo, __u8 *data, unsigned int len,
 	spin_unlock(&hw->lock);
 }
 
-void
+static void
 fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
 	      void *buf, int num_packets, int packet_size, int interval,
 	      usb_complete_t complete, void *context)
@@ -1720,7 +1720,7 @@ hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel)
 
 
 /* Hardware Initialization */
-int
+static int
 setup_hfcsusb(struct hfcsusb *hw)
 {
 	int err;

drivers/isdn/hardware/mISDN/hfcsusb.h

@@ -198,7 +198,7 @@ validconf[][19] = {
 };
 
 /* string description of chosen config */
-char *conf_str[] = {
+static char *conf_str[] = {
 	"4 Interrupt IN + 3 Isochron OUT",
 	"3 Interrupt IN + 3 Isochron OUT",
 	"4 Isochron IN + 3 Isochron OUT",
@@ -316,7 +316,7 @@ struct hfcsusb_vdata {
 #define HFC_MAX_TE_LAYER1_STATE 8
 #define HFC_MAX_NT_LAYER1_STATE 4
 
-const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
+static const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
 	"TE F0 - Reset",
 	"TE F1 - Reset",
 	"TE F2 - Sensing",
@@ -328,7 +328,7 @@ const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = {
 	"TE F8 - Lost framing",
 };
 
-const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
+static const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = {
 	"NT G0 - Reset",
 	"NT G1 - Deactive",
 	"NT G2 - Pending activation",

drivers/isdn/hisax/callc.c

@@ -24,7 +24,6 @@
 const char *lli_revision = "$Revision: 2.59.2.4 $";
 
 extern struct IsdnCard cards[];
-extern int nrcards;
 
 static int init_b_st(struct Channel *chanp, int incoming);
 static void release_b_st(struct Channel *chanp);

drivers/isdn/hisax/config.c

@@ -361,12 +361,6 @@ module_param_array(io1, int, NULL, 0);
 
 int nrcards;
 
-extern const char *l1_revision;
-extern const char *l2_revision;
-extern const char *l3_revision;
-extern const char *lli_revision;
-extern const char *tei_revision;
-
 char *HiSax_getrev(const char *revision)
 {
 	char *rev;

drivers/isdn/hisax/hfcscard.c

@@ -16,8 +16,6 @@
 #include "hfc_2bds0.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *hfcs_revision = "$Revision: 1.10.2.4 $";
 
 static irqreturn_t

drivers/isdn/hisax/hisax.h

@@ -121,6 +121,15 @@
 
 #ifdef __KERNEL__
 
+extern const char *CardType[];
+extern int nrcards;
+
+extern const char *l1_revision;
+extern const char *l2_revision;
+extern const char *l3_revision;
+extern const char *lli_revision;
+extern const char *tei_revision;
+
 /* include l3dss1 & ni1 specific process structures, but no other defines */
 #ifdef CONFIG_HISAX_EURO
   #define l3dss1_process

drivers/isdn/hisax/isdnl1.c

@@ -18,12 +18,12 @@
  *
  */
 
-const char *l1_revision = "$Revision: 2.46.2.5 $";
-
 #include <linux/init.h>
 #include "hisax.h"
 #include "isdnl1.h"
 
+const char *l1_revision = "$Revision: 2.46.2.5 $";
+
 #define TIMER3_VALUE 7000
 
 static struct Fsm l1fsm_b;

drivers/isdn/hisax/sedlbauer.c

@@ -48,8 +48,6 @@
 #include <linux/pci.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
-
 static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
 
 static const char *Sedlbauer_Types[] =

drivers/isdn/hisax/teles0.c

@@ -21,8 +21,6 @@
 #include "isac.h"
 #include "hscx.h"
 
-extern const char *CardType[];
-
 static const char *teles0_revision = "$Revision: 2.15.2.4 $";
 
 #define TELES_IOMEM_SIZE	0x400

drivers/isdn/hisax/teles3.c

@@ -20,7 +20,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *teles3_revision = "$Revision: 2.19.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)

drivers/isdn/mISDN/clock.c

@@ -41,11 +41,11 @@
 
 static u_int *debug;
 static LIST_HEAD(iclock_list);
-DEFINE_RWLOCK(iclock_lock);
+static DEFINE_RWLOCK(iclock_lock);
-u16	iclock_count;		/* counter of last clock */
+static u16 iclock_count;		/* counter of last clock */
-struct	timeval iclock_tv;	/* time stamp of last clock */
+static struct timeval iclock_tv;	/* time stamp of last clock */
-int	iclock_tv_valid;	/* already received one timestamp */
+static int iclock_tv_valid;		/* already received one timestamp */
-struct	mISDNclock *iclock_current;
+static struct mISDNclock *iclock_current;
 
 void
 mISDN_init_clock(u_int *dp)

drivers/isdn/mISDN/timerdev.c

@@ -152,8 +152,7 @@ dev_expire_timer(unsigned long data)
 	u_long			flags;
 
 	spin_lock_irqsave(&timer->dev->lock, flags);
-	list_del(&timer->list);
+	list_move_tail(&timer->list, &timer->dev->expired);
-	list_add_tail(&timer->list, &timer->dev->expired);
 	spin_unlock_irqrestore(&timer->dev->lock, flags);
 	wake_up_interruptible(&timer->dev->wait);
 }

drivers/isdn/pcbit/layer2.c

@@ -347,7 +347,6 @@ pcbit_receive(struct pcbit_dev *dev)
 		if (dev->read_frame) {
 			printk(KERN_DEBUG "pcbit_receive: Type 0 frame and read_frame != NULL\n");
 			/* discard previous queued frame */
-			if (dev->read_frame->skb)
 			kfree_skb(dev->read_frame->skb);
 			kfree(dev->read_frame);
 			dev->read_frame = NULL;
@@ -601,7 +600,6 @@ pcbit_l2_err_recover(unsigned long data)
 	dev->w_busy = dev->r_busy = 1;
 
 	if (dev->read_frame) {
-		if (dev->read_frame->skb)
 		kfree_skb(dev->read_frame->skb);
 		kfree(dev->read_frame);
 		dev->read_frame = NULL;

drivers/leds/Kconfig

@@ -223,4 +223,7 @@ config LEDS_TRIGGER_DEFAULT_ON
 	  This allows LEDs to be initialised in the ON state.
 	  If unsure, say Y.
 
+comment "iptables trigger is under Netfilter config (LED target)"
+	depends on LEDS_TRIGGERS
+
 endif # NEW_LEDS

drivers/net/3c501.c

@@ -197,6 +197,17 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops el_netdev_ops = {
+	.ndo_open		= el_open,
+	.ndo_stop		= el1_close,
+	.ndo_start_xmit 	= el_start_xmit,
+	.ndo_tx_timeout		= el_timeout,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /**
  *	el1_probe1:
  *	@dev: The device structure to use
@@ -305,12 +316,8 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	 *	The EL1-specific entries in the device structure.
 	 */
 
-	dev->open = &el_open;
+	dev->netdev_ops = &el_netdev_ops;
-	dev->hard_start_xmit = &el_start_xmit;
-	dev->tx_timeout = &el_timeout;
 	dev->watchdog_timeo = HZ;
-	dev->stop = &el1_close;
-	dev->set_multicast_list = &set_multicast_list;
 	dev->ethtool_ops = &netdev_ethtool_ops;
 	return 0;
 }

drivers/net/3c505.c

@@ -1354,6 +1354,17 @@ static int __init elp_autodetect(struct net_device *dev)
 	return 0;		/* Because of this, the layer above will return -ENODEV */
 }
 
+static const struct net_device_ops elp_netdev_ops = {
+	.ndo_open		= elp_open,
+	.ndo_stop		= elp_close,
+	.ndo_get_stats 		= elp_get_stats,
+	.ndo_start_xmit		= elp_start_xmit,
+	.ndo_tx_timeout 	= elp_timeout,
+	.ndo_set_multicast_list = elp_set_mc_list,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
 
 /******************************************************
  *
@@ -1558,13 +1569,8 @@ static int __init elplus_setup(struct net_device *dev)
 		printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
 	}
 
-	dev->open = elp_open;				/* local */
+	dev->netdev_ops = &elp_netdev_ops;
-	dev->stop = elp_close;				/* local */
-	dev->get_stats = elp_get_stats;			/* local */
-	dev->hard_start_xmit = elp_start_xmit;		/* local */
-	dev->tx_timeout = elp_timeout;			/* local */
 	dev->watchdog_timeo = 10*HZ;
-	dev->set_multicast_list = elp_set_mc_list;	/* local */
 	dev->ethtool_ops = &netdev_ethtool_ops;		/* local */
 
 	dev->mem_start = dev->mem_end = 0;

drivers/net/3c507.c

@@ -352,6 +352,16 @@ out:
 	return ERR_PTR(err);
 }
 
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= el16_open,
+	.ndo_stop		= el16_close,
+	.ndo_start_xmit 	= el16_send_packet,
+	.ndo_tx_timeout 	= el16_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 static int __init el16_probe1(struct net_device *dev, int ioaddr)
 {
 	static unsigned char init_ID_done, version_printed;
@@ -449,10 +459,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr)
 		goto out1;
 	}
 
- 	dev->open = el16_open;
+	dev->netdev_ops = &netdev_ops;
- 	dev->stop = el16_close;
-	dev->hard_start_xmit = el16_send_packet;
-	dev->tx_timeout = el16_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
 	dev->ethtool_ops = &netdev_ethtool_ops;
  	dev->flags &= ~IFF_MULTICAST;	/* Multicast doesn't work */

drivers/net/3c509.c

@@ -537,6 +537,21 @@ static struct mca_driver el3_mca_driver = {
 static int mca_registered;
 #endif /* CONFIG_MCA */
 
+static const struct net_device_ops netdev_ops = {
+	.ndo_open 		= el3_open,
+	.ndo_stop	 	= el3_close,
+	.ndo_start_xmit 	= el3_start_xmit,
+	.ndo_get_stats 		= el3_get_stats,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_tx_timeout 	= el3_tx_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= el3_poll_controller,
+#endif
+};
+
 static int __devinit el3_common_init(struct net_device *dev)
 {
 	struct el3_private *lp = netdev_priv(dev);
@@ -553,16 +568,8 @@ static int __devinit el3_common_init(struct net_device *dev)
 	}
 
 	/* The EL3-specific entries in the device structure. */
-	dev->open = &el3_open;
+	dev->netdev_ops = &netdev_ops;
-	dev->hard_start_xmit = &el3_start_xmit;
-	dev->stop = &el3_close;
-	dev->get_stats = &el3_get_stats;
-	dev->set_multicast_list = &set_multicast_list;
-	dev->tx_timeout = el3_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = el3_poll_controller;
-#endif
 	SET_ETHTOOL_OPS(dev, &ethtool_ops);
 
 	err = register_netdev(dev);

drivers/net/3c515.c

@@ -563,6 +563,20 @@ no_pnp:
 	return NULL;
 }
 
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= corkscrew_open,
+	.ndo_stop		= corkscrew_close,
+	.ndo_start_xmit		= corkscrew_start_xmit,
+	.ndo_tx_timeout		= corkscrew_timeout,
+	.ndo_get_stats		= corkscrew_get_stats,
+	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+
 static int corkscrew_setup(struct net_device *dev, int ioaddr,
 			    struct pnp_dev *idev, int card_number)
 {
@@ -681,13 +695,8 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 	vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
 
 	/* The 3c51x-specific entries in the device structure. */
-	dev->open = &corkscrew_open;
+	dev->netdev_ops = &netdev_ops;
-	dev->hard_start_xmit = &corkscrew_start_xmit;
-	dev->tx_timeout = &corkscrew_timeout;
 	dev->watchdog_timeo = (400 * HZ) / 1000;
-	dev->stop = &corkscrew_close;
-	dev->get_stats = &corkscrew_get_stats;
-	dev->set_multicast_list = &set_rx_mode;
 	dev->ethtool_ops = &netdev_ethtool_ops;
 
 	return register_netdev(dev);

drivers/net/3c523.c

@@ -403,6 +403,20 @@ static int elmc_getinfo(char *buf, int slot, void *d)
 	return len;
 }				/* elmc_getinfo() */
 
+static const struct net_device_ops netdev_ops = {
+	.ndo_open 		= elmc_open,
+	.ndo_stop		= elmc_close,
+	.ndo_get_stats		= elmc_get_stats,
+	.ndo_start_xmit		= elmc_send_packet,
+	.ndo_tx_timeout		= elmc_timeout,
+#ifdef ELMC_MULTICAST
+	.ndo_set_multicast_list = set_multicast_list,
+#endif
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /*****************************************************************/
 
 static int __init do_elmc_probe(struct net_device *dev)
@@ -544,17 +558,8 @@ static int __init do_elmc_probe(struct net_device *dev)
 	printk(KERN_INFO "%s: hardware address %pM\n",
 	       dev->name, dev->dev_addr);
 
-	dev->open = &elmc_open;
+	dev->netdev_ops = &netdev_ops;
-	dev->stop = &elmc_close;
-	dev->get_stats = &elmc_get_stats;
-	dev->hard_start_xmit = &elmc_send_packet;
-	dev->tx_timeout = &elmc_timeout;
 	dev->watchdog_timeo = HZ;
-#ifdef ELMC_MULTICAST
-	dev->set_multicast_list = &set_multicast_list;
-#else
-	dev->set_multicast_list = NULL;
-#endif
 	dev->ethtool_ops = &netdev_ethtool_ops;
 
 	/* note that we haven't actually requested the IRQ from the kernel.

drivers/net/3c527.c

@@ -288,6 +288,18 @@ struct net_device *__init mc32_probe(int unit)
 	return ERR_PTR(-ENODEV);
 }
 
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= mc32_open,
+	.ndo_stop		= mc32_close,
+	.ndo_start_xmit		= mc32_send_packet,
+	.ndo_get_stats		= mc32_get_stats,
+	.ndo_set_multicast_list = mc32_set_multicast_list,
+	.ndo_tx_timeout		= mc32_timeout,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
 /**
  * mc32_probe1	-	Check a given slot for a board and test the card
  * @dev:  Device structure to fill in
@@ -518,12 +530,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
 		dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
 
-	dev->open		= mc32_open;
+	dev->netdev_ops		= &netdev_ops;
-	dev->stop		= mc32_close;
-	dev->hard_start_xmit	= mc32_send_packet;
-	dev->get_stats		= mc32_get_stats;
-	dev->set_multicast_list = mc32_set_multicast_list;
-	dev->tx_timeout		= mc32_timeout;
 	dev->watchdog_timeo	= HZ*5;	/* Board does all the work */
 	dev->ethtool_ops	= &netdev_ethtool_ops;
 

drivers/net/3c59x.c

@@ -102,7 +102,7 @@ static int vortex_debug = 1;
 #include <linux/delay.h>
 
 
-static char version[] __devinitdata =
+static const char version[] __devinitconst =
 	DRV_NAME ": Donald Becker and others.\n";
 
 MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
@@ -992,6 +992,42 @@ out:
 	return rc;
 }
 
+static const struct net_device_ops boomrang_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= boomerang_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_do_ioctl 		= vortex_ioctl,
+#endif
+	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
+static const struct net_device_ops vortex_netdev_ops = {
+	.ndo_open		= vortex_open,
+	.ndo_stop		= vortex_close,
+	.ndo_start_xmit		= vortex_start_xmit,
+	.ndo_tx_timeout		= vortex_tx_timeout,
+	.ndo_get_stats		= vortex_get_stats,
+#ifdef CONFIG_PCI
+	.ndo_do_ioctl 		= vortex_ioctl,
+#endif
+	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= poll_vortex,
+#endif
+};
+
 /*
  * Start up the PCI/EISA device which is described by *gendev.
  * Return 0 on success.
@@ -1366,18 +1402,16 @@ static int __devinit vortex_probe1(struct device *gendev,
 	}
 
 	/* The 3c59x-specific entries in the device structure. */
-	dev->open = vortex_open;
 	if (vp->full_bus_master_tx) {
-		dev->hard_start_xmit = boomerang_start_xmit;
+		dev->netdev_ops = &boomrang_netdev_ops;
 		/* Actually, it still should work with iommu. */
 		if (card_idx < MAX_UNITS &&
 		    ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
 				hw_checksums[card_idx] == 1)) {
 			dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		}
-	} else {
+	} else
-		dev->hard_start_xmit = vortex_start_xmit;
+		dev->netdev_ops =  &vortex_netdev_ops;
-	}
 
 	if (print_info) {
 		printk(KERN_INFO "%s: scatter/gather %sabled. h/w checksums %sabled\n",
@@ -1386,18 +1420,9 @@ static int __devinit vortex_probe1(struct device *gendev,
 				(dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
 	}
 
-	dev->stop = vortex_close;
-	dev->get_stats = vortex_get_stats;
-#ifdef CONFIG_PCI
-	dev->do_ioctl = vortex_ioctl;
-#endif
 	dev->ethtool_ops = &vortex_ethtool_ops;
-	dev->set_multicast_list = set_rx_mode;
-	dev->tx_timeout = vortex_tx_timeout;
 	dev->watchdog_timeo = (watchdog * HZ) / 1000;
-#ifdef CONFIG_NET_POLL_CONTROLLER
+
-	dev->poll_controller = poll_vortex;
-#endif
 	if (pdev) {
 		vp->pm_state_valid = 1;
  		pci_save_state(VORTEX_PCI(vp));
@@ -2883,7 +2908,7 @@ static void vortex_get_drvinfo(struct net_device *dev,
 		strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
 	} else {
 		if (VORTEX_EISA(vp))
-			sprintf(info->bus_info, dev_name(vp->gendev));
+			strcpy(info->bus_info, dev_name(vp->gendev));
 		else
 			sprintf(info->bus_info, "EISA 0x%lx %d",
 					dev->base_addr, dev->irq);

drivers/net/8139cp.c

@@ -604,7 +604,7 @@ rx_next:
 
 		spin_lock_irqsave(&cp->lock, flags);
 		cpw16_f(IntrMask, cp_intr_mask);
-		__netif_rx_complete(napi);
+		__napi_complete(napi);
 		spin_unlock_irqrestore(&cp->lock, flags);
 	}
 
@@ -641,9 +641,9 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	}
 
 	if (status & (RxOK | RxErr | RxEmpty | RxFIFOOvr))
-		if (netif_rx_schedule_prep(&cp->napi)) {
+		if (napi_schedule_prep(&cp->napi)) {
 			cpw16_f(IntrMask, cp_norx_intr_mask);
-			__netif_rx_schedule(&cp->napi);
+			__napi_schedule(&cp->napi);
 		}
 
 	if (status & (TxOK | TxErr | TxEmpty | SWInt))
@@ -1602,6 +1602,28 @@ static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
 	return rc;
 }
 
+static int cp_set_mac_address(struct net_device *dev, void *p)
+{
+	struct cp_private *cp = netdev_priv(dev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	spin_lock_irq(&cp->lock);
+
+	cpw8_f(Cfg9346, Cfg9346_Unlock);
+	cpw32_f(MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
+	cpw32_f(MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
+	cpw8_f(Cfg9346, Cfg9346_Lock);
+
+	spin_unlock_irq(&cp->lock);
+
+	return 0;
+}
+
 /* Serial EEPROM section. */
 
 /*  EEPROM_Ctrl bits. */
@@ -1821,7 +1843,7 @@ static const struct net_device_ops cp_netdev_ops = {
 	.ndo_open		= cp_open,
 	.ndo_stop		= cp_close,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= cp_set_mac_address,
 	.ndo_set_multicast_list	= cp_set_rx_mode,
 	.ndo_get_stats		= cp_get_stats,
 	.ndo_do_ioctl		= cp_ioctl,

drivers/net/8139too.c

@@ -640,6 +640,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void rtl8139_poll_controller(struct net_device *dev);
 #endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
 static int rtl8139_poll(struct napi_struct *napi, int budget);
 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
 static int rtl8139_close (struct net_device *dev);
@@ -917,7 +918,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
 	.ndo_stop		= rtl8139_close,
 	.ndo_get_stats		= rtl8139_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= rtl8139_set_mac_address,
 	.ndo_start_xmit		= rtl8139_start_xmit,
 	.ndo_set_multicast_list	= rtl8139_set_rx_mode,
 	.ndo_do_ioctl		= netdev_ioctl,
@@ -2128,7 +2129,7 @@ static int rtl8139_poll(struct napi_struct *napi, int budget)
 		 */
 		spin_lock_irqsave(&tp->lock, flags);
 		RTL_W16_F(IntrMask, rtl8139_intr_mask);
-		__netif_rx_complete(napi);
+		__napi_complete(napi);
 		spin_unlock_irqrestore(&tp->lock, flags);
 	}
 	spin_unlock(&tp->rx_lock);
@@ -2178,9 +2179,9 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
 	/* Receive packets are processed by poll routine.
 	   If not running start it now. */
 	if (status & RxAckBits){
-		if (netif_rx_schedule_prep(&tp->napi)) {
+		if (napi_schedule_prep(&tp->napi)) {
 			RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
-			__netif_rx_schedule(&tp->napi);
+			__napi_schedule(&tp->napi);
 		}
 	}
 
@@ -2215,6 +2216,29 @@ static void rtl8139_poll_controller(struct net_device *dev)
 }
 #endif
 
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+	struct rtl8139_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	spin_lock_irq(&tp->lock);
+
+	RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+	RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+	RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+	RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+	spin_unlock_irq(&tp->lock);
+
+	return 0;
+}
+
 static int rtl8139_close (struct net_device *dev)
 {
 	struct rtl8139_private *tp = netdev_priv(dev);