microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

wlcore: split wl12xx/wl18xx sg parameters 

Align to new wl18xx sg parameters.
This requires to split both wl12xx/wl18xx enumerators.

Signed-off-by: Guy Mishol <guym@ti.com>
Acked-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This commit is contained in:
Guy Mishol 2015-12-02 10:28:22 +02:00 коммит произвёл Kalle Valo
Родитель 264a4aca53
Коммит 133b7326e9
7 изменённых файлов: 463 добавлений и 357 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

233
drivers/net/wireless/ti/wl12xx/conf.h
Просмотреть файл

@ -47,4 +47,237 @@ struct wl12xx_priv_conf {
struct conf_memory_settings mem_wl127x;
};
enum wl12xx_sg_params {
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master basic rate
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master EDR
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave BR
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave EDR
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
/* TODO: explain these values */
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
* during BT voice/ACL link.
*
* Range: 0 - 255 (%)
*/
WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
/*
* Compensation percentage of probe requests when active scan initiated
* during BT voice
*
* Range: 0 - 255 (%)
*/
WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP BR
*
* Range: 0 - 1000 (%)
*/
WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP EDR
*
* Range: 0 - 1000 (%)
*/
WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 1000 (%)
*/
WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,
/* TODO: explain these values */
WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
/*
* Defines whether the SG will force WLAN host to enter/exit PSM
*
* Range: 1 - SG can force, 0 - host handles PSM
*/
WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
/*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
*/
WL12XX_CONF_SG_ANTENNA_CONFIGURATION,
/*
* The threshold (percent) of max consecutive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
*/
WL12XX_CONF_SG_BEACON_MISS_PERCENT,
/*
* Protection time of the DHCP procedure.
*
* Range: 0 - 100000 (ms)
*/
WL12XX_CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
* which no new WLAN trigger frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
WL12XX_CONF_SG_RXT,
/*
* TX guard time before the beginning of a new BT voice frame during
* which no new WLAN frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
WL12XX_CONF_SG_TXT,
/*
* Enable adaptive RXT/TXT algorithm. If disabled, the host values
* will be utilized.
*
* Range: 0 - disable, 1 - enable
*/
WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,
/* TODO: explain this value */
WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
/*
* Number of consecutive BT voice frames not interrupted by WLAN
*
* Range: 0 - 100
*/
WL12XX_CONF_SG_HV3_MAX_SERVED,
/*
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_PS_POLL_TIMEOUT,
/*
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
WL12XX_CONF_SG_UPSD_TIMEOUT,
WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
/* AP params */
WL12XX_CONF_AP_BEACON_MISS_TX,
WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
/* CTS Diluting params */
WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
WL12XX_CONF_SG_TEMP_PARAM_1,
WL12XX_CONF_SG_TEMP_PARAM_2,
WL12XX_CONF_SG_TEMP_PARAM_3,
WL12XX_CONF_SG_TEMP_PARAM_4,
WL12XX_CONF_SG_TEMP_PARAM_5,
WL12XX_CONF_SG_TEMP_PARAM_6,
WL12XX_CONF_SG_TEMP_PARAM_7,
WL12XX_CONF_SG_TEMP_PARAM_8,
WL12XX_CONF_SG_TEMP_PARAM_9,
WL12XX_CONF_SG_TEMP_PARAM_10,
WL12XX_CONF_SG_PARAMS_MAX,
WL12XX_CONF_SG_PARAMS_ALL = 0xff
};
#endif /* __WL12XX_CONF_H__ */

116
drivers/net/wireless/ti/wl12xx/main.c
Просмотреть файл

@ -39,6 +39,7 @@
#include "scan.h"
#include "event.h"
#include "debugfs.h"
#include "conf.h"
static char *fref_param;
static char *tcxo_param;
@ -46,69 +47,69 @@ static char *tcxo_param;
static struct wlcore_conf wl12xx_conf = {
.sg = {
.params = {
[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
[WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
[WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
[WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
[WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
[WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
[WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
[WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
[WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
[WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
[WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
[WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
[WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
[WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
[WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
[WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
[WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
/* active scan params */
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
[WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
/* passive scan params */
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR] = 800,
[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR] = 200,
[WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3] = 200,
/* passive scan in dual antenna params */
[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
[WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN] = 0,
[WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0,
/* general params */
[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
[WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[WL12XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
[WL12XX_CONF_SG_BEACON_MISS_PERCENT] = 60,
[WL12XX_CONF_SG_DHCP_TIME] = 5000,
[WL12XX_CONF_SG_RXT] = 1200,
[WL12XX_CONF_SG_TXT] = 1000,
[WL12XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[WL12XX_CONF_SG_HV3_MAX_SERVED] = 6,
[WL12XX_CONF_SG_PS_POLL_TIMEOUT] = 10,
[WL12XX_CONF_SG_UPSD_TIMEOUT] = 10,
[WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
[WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
/* AP params */
[CONF_AP_BEACON_MISS_TX] = 3,
[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
[WL12XX_CONF_AP_BEACON_MISS_TX] = 3,
[WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
[WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
[WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
[WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
[WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
/* CTS Diluting params */
[CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
[CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
[WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
[WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
},
.state = CONF_SG_PROTECTIVE,
},
@ -1809,6 +1810,7 @@ static int wl12xx_setup(struct wl1271 *wl)
BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS);
BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS);
BUILD_BUG_ON(WL12XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX);
wl->rtable = wl12xx_rtable;
wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS;

90
drivers/net/wireless/ti/wl18xx/conf.h
Просмотреть файл

@ -139,4 +139,94 @@ struct wl18xx_priv_conf {
struct conf_ap_sleep_settings ap_sleep;
} __packed;
enum wl18xx_sg_params {
WL18XX_CONF_SG_PARAM_0 = 0,
/* Configuration Parameters */
WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
WL18XX_CONF_SG_ZIGBEE_COEX,
WL18XX_CONF_SG_TIME_SYNC,
WL18XX_CONF_SG_PARAM_4,
WL18XX_CONF_SG_PARAM_5,
WL18XX_CONF_SG_PARAM_6,
WL18XX_CONF_SG_PARAM_7,
WL18XX_CONF_SG_PARAM_8,
WL18XX_CONF_SG_PARAM_9,
WL18XX_CONF_SG_PARAM_10,
WL18XX_CONF_SG_PARAM_11,
WL18XX_CONF_SG_PARAM_12,
WL18XX_CONF_SG_PARAM_13,
WL18XX_CONF_SG_PARAM_14,
WL18XX_CONF_SG_PARAM_15,
WL18XX_CONF_SG_PARAM_16,
WL18XX_CONF_SG_PARAM_17,
WL18XX_CONF_SG_PARAM_18,
WL18XX_CONF_SG_PARAM_19,
WL18XX_CONF_SG_PARAM_20,
WL18XX_CONF_SG_PARAM_21,
WL18XX_CONF_SG_PARAM_22,
WL18XX_CONF_SG_PARAM_23,
WL18XX_CONF_SG_PARAM_24,
WL18XX_CONF_SG_PARAM_25,
/* Active Scan Parameters */
WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
WL18XX_CONF_SG_PARAM_28,
/* Passive Scan Parameters */
WL18XX_CONF_SG_PARAM_29,
WL18XX_CONF_SG_PARAM_30,
WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/* Passive Scan in Dual Antenna Parameters */
WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
/* General Parameters */
WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
WL18XX_CONF_SG_PARAM_36,
WL18XX_CONF_SG_BEACON_MISS_PERCENT,
WL18XX_CONF_SG_PARAM_38,
WL18XX_CONF_SG_RXT,
WL18XX_CONF_SG_UNUSED,
WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
WL18XX_CONF_SG_HV3_MAX_SERVED,
WL18XX_CONF_SG_PARAM_44,
WL18XX_CONF_SG_PARAM_45,
WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
WL18XX_CONF_SG_GEMINI_PARAM_47,
WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
/* AP Parameters */
WL18XX_CONF_SG_AP_BEACON_MISS_TX,
WL18XX_CONF_SG_PARAM_50,
WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
WL18XX_CONF_SG_PARAM_53,
WL18XX_CONF_SG_PARAM_54,
/* CTS Diluting Parameters */
WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
WL18XX_CONF_SG_TEMP_PARAM_1,
WL18XX_CONF_SG_TEMP_PARAM_2,
WL18XX_CONF_SG_TEMP_PARAM_3,
WL18XX_CONF_SG_TEMP_PARAM_4,
WL18XX_CONF_SG_TEMP_PARAM_5,
WL18XX_CONF_SG_TEMP_PARAM_6,
WL18XX_CONF_SG_TEMP_PARAM_7,
WL18XX_CONF_SG_TEMP_PARAM_8,
WL18XX_CONF_SG_TEMP_PARAM_9,
WL18XX_CONF_SG_TEMP_PARAM_10,
WL18XX_CONF_SG_PARAMS_MAX,
WL18XX_CONF_SG_PARAMS_ALL = 0xff
};
#endif /* __WL18XX_CONF_H__ */

138
drivers/net/wireless/ti/wl18xx/main.c
Просмотреть файл

@ -177,69 +177,80 @@ enum wl18xx_hw_rates {
static struct wlcore_conf wl18xx_conf = {
.sg = {
.params = {
[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,
[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,
[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,
[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,
[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,
[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,
[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,
[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,
[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,
[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,
[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,
[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,
[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,
[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,
[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,
[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,
/* active scan params */
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,
/* passive scan params */
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,
[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
/* passive scan in dual antenna params */
[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,
[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,
/* general params */
[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
[CONF_SG_BEACON_MISS_PERCENT] = 60,
[CONF_SG_DHCP_TIME] = 5000,
[CONF_SG_RXT] = 1200,
[CONF_SG_TXT] = 1000,
[CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[CONF_SG_HV3_MAX_SERVED] = 6,
[CONF_SG_PS_POLL_TIMEOUT] = 10,
[CONF_SG_UPSD_TIMEOUT] = 10,
[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,
[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,
/* AP params */
[CONF_AP_BEACON_MISS_TX] = 3,
[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,
[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,
[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,
[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,
[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,
/* CTS Diluting params */
[CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
[CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
[WL18XX_CONF_SG_PARAM_0] = 0,
/* Configuartion Parameters */
[WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0,
[WL18XX_CONF_SG_ZIGBEE_COEX] = 0,
[WL18XX_CONF_SG_TIME_SYNC] = 0,
[WL18XX_CONF_SG_PARAM_4] = 0,
[WL18XX_CONF_SG_PARAM_5] = 0,
[WL18XX_CONF_SG_PARAM_6] = 0,
[WL18XX_CONF_SG_PARAM_7] = 0,
[WL18XX_CONF_SG_PARAM_8] = 0,
[WL18XX_CONF_SG_PARAM_9] = 0,
[WL18XX_CONF_SG_PARAM_10] = 0,
[WL18XX_CONF_SG_PARAM_11] = 0,
[WL18XX_CONF_SG_PARAM_12] = 0,
[WL18XX_CONF_SG_PARAM_13] = 0,
[WL18XX_CONF_SG_PARAM_14] = 0,
[WL18XX_CONF_SG_PARAM_15] = 0,
[WL18XX_CONF_SG_PARAM_16] = 0,
[WL18XX_CONF_SG_PARAM_17] = 0,
[WL18XX_CONF_SG_PARAM_18] = 0,
[WL18XX_CONF_SG_PARAM_19] = 0,
[WL18XX_CONF_SG_PARAM_20] = 0,
[WL18XX_CONF_SG_PARAM_21] = 0,
[WL18XX_CONF_SG_PARAM_22] = 0,
[WL18XX_CONF_SG_PARAM_23] = 0,
[WL18XX_CONF_SG_PARAM_24] = 0,
[WL18XX_CONF_SG_PARAM_25] = 0,
/* Active Scan Parameters */
[WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[WL18XX_CONF_SG_PARAM_28] = 0,
/* Passive Scan Parameters */
[WL18XX_CONF_SG_PARAM_29] = 0,
[WL18XX_CONF_SG_PARAM_30] = 0,
[WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,
/* Passive Scan in Dual Antenna Parameters */
[WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,
[WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN] = 0,
[WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0,
/* General Parameters */
[WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,
[WL18XX_CONF_SG_PARAM_36] = 0,
[WL18XX_CONF_SG_BEACON_MISS_PERCENT] = 60,
[WL18XX_CONF_SG_PARAM_38] = 0,
[WL18XX_CONF_SG_RXT] = 1200,
[WL18XX_CONF_SG_UNUSED] = 0,
[WL18XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1,
[WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,
[WL18XX_CONF_SG_HV3_MAX_SERVED] = 6,
[WL18XX_CONF_SG_PARAM_44] = 0,
[WL18XX_CONF_SG_PARAM_45] = 0,
[WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,
[WL18XX_CONF_SG_GEMINI_PARAM_47] = 0,
[WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 0,
/* AP Parameters */
[WL18XX_CONF_SG_AP_BEACON_MISS_TX] = 3,
[WL18XX_CONF_SG_PARAM_50] = 0,
[WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL] = 2,
[WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 30,
[WL18XX_CONF_SG_PARAM_53] = 0,
[WL18XX_CONF_SG_PARAM_54] = 0,
/* CTS Diluting Parameters */
[WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0,
[WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_1] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_2] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_3] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_4] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_5] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_6] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_7] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_8] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_9] = 0,
[WL18XX_CONF_SG_TEMP_PARAM_10] = 0,
},
.state = CONF_SG_PROTECTIVE,
},
@ -1895,6 +1906,7 @@ static int wl18xx_setup(struct wl1271 *wl)
BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS);
BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS);
BUILD_BUG_ON(WL18XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX);
wl->rtable = wl18xx_rtable;
wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS;

4
drivers/net/wireless/ti/wlcore/acx.c
Просмотреть файл

@ -534,9 +534,9 @@ int wl12xx_acx_sg_cfg(struct wl1271 *wl)
}
/* BT-WLAN coext parameters */
for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
for (i = 0; i < WLCORE_CONF_SG_PARAMS_MAX; i++)
param->params[i] = cpu_to_le32(c->params[i]);
param->param_idx = CONF_SG_PARAMS_ALL;
param->param_idx = WLCORE_CONF_SG_PARAMS_ALL;
ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
if (ret < 0) {

2
drivers/net/wireless/ti/wlcore/acx.h
Просмотреть файл

@ -300,7 +300,7 @@ struct acx_bt_wlan_coex {
struct acx_bt_wlan_coex_param {
struct acx_header header;
__le32 params[CONF_SG_PARAMS_MAX];
__le32 params[WLCORE_CONF_SG_PARAMS_MAX];
u8 param_idx;
u8 padding[3];
} __packed;

237
drivers/net/wireless/ti/wlcore/conf.h
Просмотреть файл

@ -110,242 +110,11 @@ enum {
CONF_SG_OPPORTUNISTIC
};
enum {
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_SLAVE_MIN_BR,
CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_MASTER_MIN_EDR,
CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_SLAVE_MIN_EDR,
CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave BR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_WLAN_PS_MASTER_BR,
CONF_SG_ACL_WLAN_PS_SLAVE_BR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_WLAN_PS_MASTER_EDR,
CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
/* TODO: explain these values */
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
* during BT voice/ACL link.
*
* Range: 0 - 255 (%)
*/
CONF_SG_AUTO_SCAN_PROBE_REQ,
/*
* Compensation percentage of probe requests when active scan initiated
* during BT voice
*
* Range: 0 - 255 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP BR
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP EDR
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/* TODO: explain these values */
CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
/*
* Defines whether the SG will force WLAN host to enter/exit PSM
*
* Range: 1 - SG can force, 0 - host handles PSM
*/
CONF_SG_STA_FORCE_PS_IN_BT_SCO,
/*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
*/
CONF_SG_ANTENNA_CONFIGURATION,
/*
* The threshold (percent) of max consecutive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
*/
CONF_SG_BEACON_MISS_PERCENT,
/*
* Protection time of the DHCP procedure.
*
* Range: 0 - 100000 (ms)
*/
CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
* which no new WLAN trigger frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_RXT,
/*
* TX guard time before the beginning of a new BT voice frame during
* which no new WLAN frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_TXT,
/*
* Enable adaptive RXT/TXT algorithm. If disabled, the host values
* will be utilized.
*
* Range: 0 - disable, 1 - enable
*/
CONF_SG_ADAPTIVE_RXT_TXT,
/* TODO: explain this value */
CONF_SG_GENERAL_USAGE_BIT_MAP,
/*
* Number of consecutive BT voice frames not interrupted by WLAN
*
* Range: 0 - 100
*/
CONF_SG_HV3_MAX_SERVED,
/*
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_PS_POLL_TIMEOUT,
/*
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_UPSD_TIMEOUT,
CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
CONF_SG_STA_CONNECTION_PROTECTION_TIME,
/* AP params */
CONF_AP_BEACON_MISS_TX,
CONF_AP_RX_WINDOW_AFTER_BEACON,
CONF_AP_BEACON_WINDOW_INTERVAL,
CONF_AP_CONNECTION_PROTECTION_TIME,
CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
/* CTS Diluting params */
CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
CONF_SG_PARAMS_MAX,
CONF_SG_PARAMS_ALL = 0xff
};
#define WLCORE_CONF_SG_PARAMS_MAX 67
#define WLCORE_CONF_SG_PARAMS_ALL 0xff
struct conf_sg_settings {
u32 params[CONF_SG_PARAMS_MAX];
u32 params[WLCORE_CONF_SG_PARAMS_MAX];
u8 state;
} __packed;