mfd: add PCAP driver
The PCAP Asic as present on EZX phones is a multi function device with voltage regulators, ADC, touch screen controller, RTC, USB transceiver, leds controller, and audio codec. It has two SPI ports, typically one is connected to the application processor and another to the baseband, this driver provides read/write functions to its registers, irq demultiplexer and ADC queueing/abstraction. This chip is used on a lot of Motorola phones, it was manufactured by TI as a custom product with the name PTWL93017, later this design evolved into the ATLAS PMIC from Freescale (MC13783). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Родитель
14fa56917d
Коммит
13a09f93d2
|
@ -255,6 +255,13 @@ config AB3100_CORE
|
|||
LEDs, vibrator, system power and temperature, power management
|
||||
and ALSA sound.
|
||||
|
||||
config EZX_PCAP
|
||||
bool "PCAP Support"
|
||||
depends on GENERIC_HARDIRQS && SPI_MASTER
|
||||
help
|
||||
This enables the PCAP ASIC present on EZX Phones. This is
|
||||
needed for MMC, TouchScreen, Sound, USB, etc..
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Multimedia Capabilities Port drivers"
|
||||
|
|
|
@ -26,6 +26,8 @@ obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o
|
|||
|
||||
obj-$(CONFIG_MFD_CORE) += mfd-core.o
|
||||
|
||||
obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
|
||||
|
||||
obj-$(CONFIG_MCP) += mcp-core.o
|
||||
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
|
||||
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
|
||||
|
|
|
@ -0,0 +1,505 @@
|
|||
/*
|
||||
* Driver for Motorola PCAP2 as present in EZX phones
|
||||
*
|
||||
* Copyright (C) 2006 Harald Welte <laforge@openezx.org>
|
||||
* Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/mfd/ezx-pcap.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#define PCAP_ADC_MAXQ 8
|
||||
struct pcap_adc_request {
|
||||
u8 bank;
|
||||
u8 ch[2];
|
||||
u32 flags;
|
||||
void (*callback)(void *, u16[]);
|
||||
void *data;
|
||||
};
|
||||
|
||||
struct pcap_adc_sync_request {
|
||||
u16 res[2];
|
||||
struct completion completion;
|
||||
};
|
||||
|
||||
struct pcap_chip {
|
||||
struct spi_device *spi;
|
||||
|
||||
/* IO */
|
||||
u32 buf;
|
||||
struct mutex io_mutex;
|
||||
|
||||
/* IRQ */
|
||||
unsigned int irq_base;
|
||||
u32 msr;
|
||||
struct work_struct isr_work;
|
||||
struct work_struct msr_work;
|
||||
struct workqueue_struct *workqueue;
|
||||
|
||||
/* ADC */
|
||||
struct pcap_adc_request *adc_queue[PCAP_ADC_MAXQ];
|
||||
u8 adc_head;
|
||||
u8 adc_tail;
|
||||
struct mutex adc_mutex;
|
||||
};
|
||||
|
||||
/* IO */
|
||||
static int ezx_pcap_putget(struct pcap_chip *pcap, u32 *data)
|
||||
{
|
||||
struct spi_transfer t;
|
||||
struct spi_message m;
|
||||
int status;
|
||||
|
||||
memset(&t, 0, sizeof t);
|
||||
spi_message_init(&m);
|
||||
t.len = sizeof(u32);
|
||||
spi_message_add_tail(&t, &m);
|
||||
|
||||
pcap->buf = *data;
|
||||
t.tx_buf = (u8 *) &pcap->buf;
|
||||
t.rx_buf = (u8 *) &pcap->buf;
|
||||
status = spi_sync(pcap->spi, &m);
|
||||
|
||||
if (status == 0)
|
||||
*data = pcap->buf;
|
||||
|
||||
return status;
|
||||
}
|
||||
|
||||
int ezx_pcap_write(struct pcap_chip *pcap, u8 reg_num, u32 value)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&pcap->io_mutex);
|
||||
value &= PCAP_REGISTER_VALUE_MASK;
|
||||
value |= PCAP_REGISTER_WRITE_OP_BIT
|
||||
| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
|
||||
ret = ezx_pcap_putget(pcap, &value);
|
||||
mutex_unlock(&pcap->io_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ezx_pcap_write);
|
||||
|
||||
int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&pcap->io_mutex);
|
||||
*value = PCAP_REGISTER_READ_OP_BIT
|
||||
| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
|
||||
|
||||
ret = ezx_pcap_putget(pcap, value);
|
||||
mutex_unlock(&pcap->io_mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ezx_pcap_read);
|
||||
|
||||
/* IRQ */
|
||||
static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
|
||||
{
|
||||
return 1 << (irq - pcap->irq_base);
|
||||
}
|
||||
|
||||
int pcap_to_irq(struct pcap_chip *pcap, int irq)
|
||||
{
|
||||
return pcap->irq_base + irq;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pcap_to_irq);
|
||||
|
||||
static void pcap_mask_irq(unsigned int irq)
|
||||
{
|
||||
struct pcap_chip *pcap = get_irq_chip_data(irq);
|
||||
|
||||
pcap->msr |= irq2pcap(pcap, irq);
|
||||
queue_work(pcap->workqueue, &pcap->msr_work);
|
||||
}
|
||||
|
||||
static void pcap_unmask_irq(unsigned int irq)
|
||||
{
|
||||
struct pcap_chip *pcap = get_irq_chip_data(irq);
|
||||
|
||||
pcap->msr &= ~irq2pcap(pcap, irq);
|
||||
queue_work(pcap->workqueue, &pcap->msr_work);
|
||||
}
|
||||
|
||||
static struct irq_chip pcap_irq_chip = {
|
||||
.name = "pcap",
|
||||
.mask = pcap_mask_irq,
|
||||
.unmask = pcap_unmask_irq,
|
||||
};
|
||||
|
||||
static void pcap_msr_work(struct work_struct *work)
|
||||
{
|
||||
struct pcap_chip *pcap = container_of(work, struct pcap_chip, msr_work);
|
||||
|
||||
ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
|
||||
}
|
||||
|
||||
static void pcap_isr_work(struct work_struct *work)
|
||||
{
|
||||
struct pcap_chip *pcap = container_of(work, struct pcap_chip, isr_work);
|
||||
struct pcap_platform_data *pdata = pcap->spi->dev.platform_data;
|
||||
u32 msr, isr, int_sel, service;
|
||||
int irq;
|
||||
|
||||
ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
|
||||
ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
|
||||
|
||||
/* We cant service/ack irqs that are assigned to port 2 */
|
||||
if (!(pdata->config & PCAP_SECOND_PORT)) {
|
||||
ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
|
||||
isr &= ~int_sel;
|
||||
}
|
||||
ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
|
||||
|
||||
local_irq_disable();
|
||||
service = isr & ~msr;
|
||||
|
||||
for (irq = pcap->irq_base; service; service >>= 1, irq++) {
|
||||
if (service & 1) {
|
||||
struct irq_desc *desc = irq_to_desc(irq);
|
||||
|
||||
if (WARN(!desc, KERN_WARNING
|
||||
"Invalid PCAP IRQ %d\n", irq))
|
||||
break;
|
||||
|
||||
if (desc->status & IRQ_DISABLED)
|
||||
note_interrupt(irq, desc, IRQ_NONE);
|
||||
else
|
||||
desc->handle_irq(irq, desc);
|
||||
}
|
||||
}
|
||||
local_irq_enable();
|
||||
}
|
||||
|
||||
static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
struct pcap_chip *pcap = get_irq_data(irq);
|
||||
|
||||
desc->chip->ack(irq);
|
||||
queue_work(pcap->workqueue, &pcap->isr_work);
|
||||
return;
|
||||
}
|
||||
|
||||
/* ADC */
|
||||
static void pcap_disable_adc(struct pcap_chip *pcap)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
|
||||
tmp &= ~(PCAP_ADC_ADEN|PCAP_ADC_BATT_I_ADC|PCAP_ADC_BATT_I_POLARITY);
|
||||
ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
|
||||
}
|
||||
|
||||
static void pcap_adc_trigger(struct pcap_chip *pcap)
|
||||
{
|
||||
u32 tmp;
|
||||
u8 head;
|
||||
|
||||
mutex_lock(&pcap->adc_mutex);
|
||||
head = pcap->adc_head;
|
||||
if (!pcap->adc_queue[head]) {
|
||||
/* queue is empty, save power */
|
||||
pcap_disable_adc(pcap);
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
return;
|
||||
}
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
|
||||
/* start conversion on requested bank */
|
||||
tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
|
||||
|
||||
if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
|
||||
tmp |= PCAP_ADC_AD_SEL1;
|
||||
|
||||
ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
|
||||
ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
|
||||
}
|
||||
|
||||
static irqreturn_t pcap_adc_irq(int irq, void *_pcap)
|
||||
{
|
||||
struct pcap_chip *pcap = _pcap;
|
||||
struct pcap_adc_request *req;
|
||||
u16 res[2];
|
||||
u32 tmp;
|
||||
|
||||
mutex_lock(&pcap->adc_mutex);
|
||||
req = pcap->adc_queue[pcap->adc_head];
|
||||
|
||||
if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
|
||||
return IRQ_HANDLED;
|
||||
|
||||
/* read requested channels results */
|
||||
ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
|
||||
tmp &= ~(PCAP_ADC_ADA1_MASK | PCAP_ADC_ADA2_MASK);
|
||||
tmp |= (req->ch[0] << PCAP_ADC_ADA1_SHIFT);
|
||||
tmp |= (req->ch[1] << PCAP_ADC_ADA2_SHIFT);
|
||||
ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
|
||||
ezx_pcap_read(pcap, PCAP_REG_ADR, &tmp);
|
||||
res[0] = (tmp & PCAP_ADR_ADD1_MASK) >> PCAP_ADR_ADD1_SHIFT;
|
||||
res[1] = (tmp & PCAP_ADR_ADD2_MASK) >> PCAP_ADR_ADD2_SHIFT;
|
||||
|
||||
pcap->adc_queue[pcap->adc_head] = NULL;
|
||||
pcap->adc_head = (pcap->adc_head + 1) & (PCAP_ADC_MAXQ - 1);
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
|
||||
/* pass the results and release memory */
|
||||
req->callback(req->data, res);
|
||||
kfree(req);
|
||||
|
||||
/* trigger next conversion (if any) on queue */
|
||||
pcap_adc_trigger(pcap);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
int pcap_adc_async(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
|
||||
void *callback, void *data)
|
||||
{
|
||||
struct pcap_adc_request *req;
|
||||
|
||||
/* This will be freed after we have a result */
|
||||
req = kmalloc(sizeof(struct pcap_adc_request), GFP_KERNEL);
|
||||
if (!req)
|
||||
return -ENOMEM;
|
||||
|
||||
req->bank = bank;
|
||||
req->flags = flags;
|
||||
req->ch[0] = ch[0];
|
||||
req->ch[1] = ch[1];
|
||||
req->callback = callback;
|
||||
req->data = data;
|
||||
|
||||
mutex_lock(&pcap->adc_mutex);
|
||||
if (pcap->adc_queue[pcap->adc_tail]) {
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
kfree(req);
|
||||
return -EBUSY;
|
||||
}
|
||||
pcap->adc_queue[pcap->adc_tail] = req;
|
||||
pcap->adc_tail = (pcap->adc_tail + 1) & (PCAP_ADC_MAXQ - 1);
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
|
||||
/* start conversion */
|
||||
pcap_adc_trigger(pcap);
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pcap_adc_async);
|
||||
|
||||
static void pcap_adc_sync_cb(void *param, u16 res[])
|
||||
{
|
||||
struct pcap_adc_sync_request *req = param;
|
||||
|
||||
req->res[0] = res[0];
|
||||
req->res[1] = res[1];
|
||||
complete(&req->completion);
|
||||
}
|
||||
|
||||
int pcap_adc_sync(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
|
||||
u16 res[])
|
||||
{
|
||||
struct pcap_adc_sync_request sync_data;
|
||||
int ret;
|
||||
|
||||
init_completion(&sync_data.completion);
|
||||
ret = pcap_adc_async(pcap, bank, flags, ch, pcap_adc_sync_cb,
|
||||
&sync_data);
|
||||
if (ret)
|
||||
return ret;
|
||||
wait_for_completion(&sync_data.completion);
|
||||
res[0] = sync_data.res[0];
|
||||
res[1] = sync_data.res[1];
|
||||
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(pcap_adc_sync);
|
||||
|
||||
/* subdevs */
|
||||
static int pcap_remove_subdev(struct device *dev, void *unused)
|
||||
{
|
||||
platform_device_unregister(to_platform_device(dev));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit pcap_add_subdev(struct pcap_chip *pcap,
|
||||
struct pcap_subdev *subdev)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
|
||||
pdev = platform_device_alloc(subdev->name, subdev->id);
|
||||
pdev->dev.parent = &pcap->spi->dev;
|
||||
pdev->dev.platform_data = subdev->platform_data;
|
||||
platform_set_drvdata(pdev, pcap);
|
||||
|
||||
return platform_device_add(pdev);
|
||||
}
|
||||
|
||||
static int __devexit ezx_pcap_remove(struct spi_device *spi)
|
||||
{
|
||||
struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
|
||||
struct pcap_platform_data *pdata = spi->dev.platform_data;
|
||||
int i, adc_irq;
|
||||
|
||||
/* remove all registered subdevs */
|
||||
device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
|
||||
|
||||
/* cleanup ADC */
|
||||
adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
|
||||
PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
|
||||
free_irq(adc_irq, pcap);
|
||||
mutex_lock(&pcap->adc_mutex);
|
||||
for (i = 0; i < PCAP_ADC_MAXQ; i++)
|
||||
kfree(pcap->adc_queue[i]);
|
||||
mutex_unlock(&pcap->adc_mutex);
|
||||
|
||||
/* cleanup irqchip */
|
||||
for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
|
||||
set_irq_chip_and_handler(i, NULL, NULL);
|
||||
|
||||
destroy_workqueue(pcap->workqueue);
|
||||
|
||||
kfree(pcap);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit ezx_pcap_probe(struct spi_device *spi)
|
||||
{
|
||||
struct pcap_platform_data *pdata = spi->dev.platform_data;
|
||||
struct pcap_chip *pcap;
|
||||
int i, adc_irq;
|
||||
int ret = -ENODEV;
|
||||
|
||||
/* platform data is required */
|
||||
if (!pdata)
|
||||
goto ret;
|
||||
|
||||
pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
|
||||
if (!pcap) {
|
||||
ret = -ENOMEM;
|
||||
goto ret;
|
||||
}
|
||||
|
||||
mutex_init(&pcap->io_mutex);
|
||||
mutex_init(&pcap->adc_mutex);
|
||||
INIT_WORK(&pcap->isr_work, pcap_isr_work);
|
||||
INIT_WORK(&pcap->msr_work, pcap_msr_work);
|
||||
dev_set_drvdata(&spi->dev, pcap);
|
||||
|
||||
/* setup spi */
|
||||
spi->bits_per_word = 32;
|
||||
spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
|
||||
ret = spi_setup(spi);
|
||||
if (ret)
|
||||
goto free_pcap;
|
||||
|
||||
pcap->spi = spi;
|
||||
|
||||
/* setup irq */
|
||||
pcap->irq_base = pdata->irq_base;
|
||||
pcap->workqueue = create_singlethread_workqueue("pcapd");
|
||||
if (!pcap->workqueue) {
|
||||
dev_err(&spi->dev, "cant create pcap thread\n");
|
||||
goto free_pcap;
|
||||
}
|
||||
|
||||
/* redirect interrupts to AP, except adcdone2 */
|
||||
if (!(pdata->config & PCAP_SECOND_PORT))
|
||||
ezx_pcap_write(pcap, PCAP_REG_INT_SEL,
|
||||
(1 << PCAP_IRQ_ADCDONE2));
|
||||
|
||||
/* setup irq chip */
|
||||
for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++) {
|
||||
set_irq_chip_and_handler(i, &pcap_irq_chip, handle_simple_irq);
|
||||
set_irq_chip_data(i, pcap);
|
||||
#ifdef CONFIG_ARM
|
||||
set_irq_flags(i, IRQF_VALID);
|
||||
#else
|
||||
set_irq_noprobe(i);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* mask/ack all PCAP interrupts */
|
||||
ezx_pcap_write(pcap, PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
|
||||
ezx_pcap_write(pcap, PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
|
||||
pcap->msr = PCAP_MASK_ALL_INTERRUPT;
|
||||
|
||||
set_irq_type(spi->irq, IRQ_TYPE_EDGE_RISING);
|
||||
set_irq_data(spi->irq, pcap);
|
||||
set_irq_chained_handler(spi->irq, pcap_irq_handler);
|
||||
set_irq_wake(spi->irq, 1);
|
||||
|
||||
/* ADC */
|
||||
adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
|
||||
PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
|
||||
|
||||
ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
|
||||
if (ret)
|
||||
goto free_irqchip;
|
||||
|
||||
/* setup subdevs */
|
||||
for (i = 0; i < pdata->num_subdevs; i++) {
|
||||
ret = pcap_add_subdev(pcap, &pdata->subdevs[i]);
|
||||
if (ret)
|
||||
goto remove_subdevs;
|
||||
}
|
||||
|
||||
/* board specific quirks */
|
||||
if (pdata->init)
|
||||
pdata->init(pcap);
|
||||
|
||||
return 0;
|
||||
|
||||
remove_subdevs:
|
||||
device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
|
||||
/* free_adc: */
|
||||
free_irq(adc_irq, pcap);
|
||||
free_irqchip:
|
||||
for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
|
||||
set_irq_chip_and_handler(i, NULL, NULL);
|
||||
/* destroy_workqueue: */
|
||||
destroy_workqueue(pcap->workqueue);
|
||||
free_pcap:
|
||||
kfree(pcap);
|
||||
ret:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct spi_driver ezxpcap_driver = {
|
||||
.probe = ezx_pcap_probe,
|
||||
.remove = __devexit_p(ezx_pcap_remove),
|
||||
.driver = {
|
||||
.name = "ezx-pcap",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init ezx_pcap_init(void)
|
||||
{
|
||||
return spi_register_driver(&ezxpcap_driver);
|
||||
}
|
||||
|
||||
static void __exit ezx_pcap_exit(void)
|
||||
{
|
||||
spi_unregister_driver(&ezxpcap_driver);
|
||||
}
|
||||
|
||||
module_init(ezx_pcap_init);
|
||||
module_exit(ezx_pcap_exit);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
|
||||
MODULE_DESCRIPTION("Motorola PCAP2 ASIC Driver");
|
|
@ -0,0 +1,256 @@
|
|||
/*
|
||||
* Copyright 2009 Daniel Ribeiro <drwyrm@gmail.com>
|
||||
*
|
||||
* For further information, please see http://wiki.openezx.org/PCAP2
|
||||
*/
|
||||
|
||||
#ifndef EZX_PCAP_H
|
||||
#define EZX_PCAP_H
|
||||
|
||||
struct pcap_subdev {
|
||||
int id;
|
||||
const char *name;
|
||||
void *platform_data;
|
||||
};
|
||||
|
||||
struct pcap_platform_data {
|
||||
unsigned int irq_base;
|
||||
unsigned int config;
|
||||
void (*init) (void *); /* board specific init */
|
||||
int num_subdevs;
|
||||
struct pcap_subdev *subdevs;
|
||||
};
|
||||
|
||||
struct pcap_chip;
|
||||
|
||||
int ezx_pcap_write(struct pcap_chip *, u8, u32);
|
||||
int ezx_pcap_read(struct pcap_chip *, u8, u32 *);
|
||||
int pcap_to_irq(struct pcap_chip *, int);
|
||||
int pcap_adc_async(struct pcap_chip *, u8, u32, u8[], void *, void *);
|
||||
int pcap_adc_sync(struct pcap_chip *, u8, u32, u8[], u16[]);
|
||||
|
||||
#define PCAP_SECOND_PORT 1
|
||||
#define PCAP_CS_AH 2
|
||||
|
||||
#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000
|
||||
#define PCAP_REGISTER_READ_OP_BIT 0x00000000
|
||||
|
||||
#define PCAP_REGISTER_VALUE_MASK 0x01ffffff
|
||||
#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000
|
||||
#define PCAP_REGISTER_ADDRESS_SHIFT 26
|
||||
#define PCAP_REGISTER_NUMBER 32
|
||||
#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
|
||||
#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff
|
||||
|
||||
/* registers acessible by both pcap ports */
|
||||
#define PCAP_REG_ISR 0x0 /* Interrupt Status */
|
||||
#define PCAP_REG_MSR 0x1 /* Interrupt Mask */
|
||||
#define PCAP_REG_PSTAT 0x2 /* Processor Status */
|
||||
#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */
|
||||
#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */
|
||||
#define PCAP_REG_BATT 0x8 /* Battery Control */
|
||||
#define PCAP_REG_ADC 0x9 /* AD Control */
|
||||
#define PCAP_REG_ADR 0xa /* AD Result */
|
||||
#define PCAP_REG_CODEC 0xb /* Audio Codec Control */
|
||||
#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */
|
||||
#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */
|
||||
#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */
|
||||
#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */
|
||||
#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */
|
||||
#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */
|
||||
#define PCAP_REG_GP 0x1b /* General Purpose */
|
||||
#define PCAP_REG_TEST1 0x1c
|
||||
#define PCAP_REG_TEST2 0x1d
|
||||
#define PCAP_REG_VENDOR_TEST1 0x1e
|
||||
#define PCAP_REG_VENDOR_TEST2 0x1f
|
||||
|
||||
/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
|
||||
#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */
|
||||
#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
|
||||
#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
|
||||
#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */
|
||||
#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */
|
||||
#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */
|
||||
#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */
|
||||
#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */
|
||||
#define PCAP_REG_PWR 0x13 /* Power Control */
|
||||
#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */
|
||||
#define PCAP_REG_VENDOR_REV 0x17
|
||||
#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */
|
||||
|
||||
/* PCAP2 Interrupts */
|
||||
#define PCAP_NIRQS 23
|
||||
#define PCAP_IRQ_ADCDONE 0 /* ADC done port 1 */
|
||||
#define PCAP_IRQ_TS 1 /* Touch Screen */
|
||||
#define PCAP_IRQ_1HZ 2 /* 1HZ timer */
|
||||
#define PCAP_IRQ_WH 3 /* ADC above high limit */
|
||||
#define PCAP_IRQ_WL 4 /* ADC below low limit */
|
||||
#define PCAP_IRQ_TODA 5 /* Time of day alarm */
|
||||
#define PCAP_IRQ_USB4V 6 /* USB above 4V */
|
||||
#define PCAP_IRQ_ONOFF 7 /* On/Off button */
|
||||
#define PCAP_IRQ_ONOFF2 8 /* On/Off button 2 */
|
||||
#define PCAP_IRQ_USB1V 9 /* USB above 1V */
|
||||
#define PCAP_IRQ_MOBPORT 10
|
||||
#define PCAP_IRQ_MIC 11 /* Mic attach/HS button */
|
||||
#define PCAP_IRQ_HS 12 /* Headset attach */
|
||||
#define PCAP_IRQ_ST 13
|
||||
#define PCAP_IRQ_PC 14 /* Power Cut */
|
||||
#define PCAP_IRQ_WARM 15
|
||||
#define PCAP_IRQ_EOL 16 /* Battery End Of Life */
|
||||
#define PCAP_IRQ_CLK 17
|
||||
#define PCAP_IRQ_SYSRST 18 /* System Reset */
|
||||
#define PCAP_IRQ_DUMMY 19
|
||||
#define PCAP_IRQ_ADCDONE2 20 /* ADC done port 2 */
|
||||
#define PCAP_IRQ_SOFTRESET 21
|
||||
#define PCAP_IRQ_MNEXB 22
|
||||
|
||||
/* voltage regulators */
|
||||
#define V1 0
|
||||
#define V2 1
|
||||
#define V3 2
|
||||
#define V4 3
|
||||
#define V5 4
|
||||
#define V6 5
|
||||
#define V7 6
|
||||
#define V8 7
|
||||
#define V9 8
|
||||
#define V10 9
|
||||
#define VAUX1 10
|
||||
#define VAUX2 11
|
||||
#define VAUX3 12
|
||||
#define VAUX4 13
|
||||
#define VSIM 14
|
||||
#define VSIM2 15
|
||||
#define VVIB 16
|
||||
#define SW1 17
|
||||
#define SW2 18
|
||||
#define SW3 19
|
||||
#define SW1S 20
|
||||
#define SW2S 21
|
||||
|
||||
#define PCAP_BATT_DAC_MASK 0x000000ff
|
||||
#define PCAP_BATT_DAC_SHIFT 0
|
||||
#define PCAP_BATT_B_FDBK (1 << 8)
|
||||
#define PCAP_BATT_EXT_ISENSE (1 << 9)
|
||||
#define PCAP_BATT_V_COIN_MASK 0x00003c00
|
||||
#define PCAP_BATT_V_COIN_SHIFT 10
|
||||
#define PCAP_BATT_I_COIN (1 << 14)
|
||||
#define PCAP_BATT_COIN_CH_EN (1 << 15)
|
||||
#define PCAP_BATT_EOL_SEL_MASK 0x000e0000
|
||||
#define PCAP_BATT_EOL_SEL_SHIFT 17
|
||||
#define PCAP_BATT_EOL_CMP_EN (1 << 20)
|
||||
#define PCAP_BATT_BATT_DET_EN (1 << 21)
|
||||
#define PCAP_BATT_THERMBIAS_CTRL (1 << 22)
|
||||
|
||||
#define PCAP_ADC_ADEN (1 << 0)
|
||||
#define PCAP_ADC_RAND (1 << 1)
|
||||
#define PCAP_ADC_AD_SEL1 (1 << 2)
|
||||
#define PCAP_ADC_AD_SEL2 (1 << 3)
|
||||
#define PCAP_ADC_ADA1_MASK 0x00000070
|
||||
#define PCAP_ADC_ADA1_SHIFT 4
|
||||
#define PCAP_ADC_ADA2_MASK 0x00000380
|
||||
#define PCAP_ADC_ADA2_SHIFT 7
|
||||
#define PCAP_ADC_ATO_MASK 0x00003c00
|
||||
#define PCAP_ADC_ATO_SHIFT 10
|
||||
#define PCAP_ADC_ATOX (1 << 14)
|
||||
#define PCAP_ADC_MTR1 (1 << 15)
|
||||
#define PCAP_ADC_MTR2 (1 << 16)
|
||||
#define PCAP_ADC_TS_M_MASK 0x000e0000
|
||||
#define PCAP_ADC_TS_M_SHIFT 17
|
||||
#define PCAP_ADC_TS_REF_LOWPWR (1 << 20)
|
||||
#define PCAP_ADC_TS_REFENB (1 << 21)
|
||||
#define PCAP_ADC_BATT_I_POLARITY (1 << 22)
|
||||
#define PCAP_ADC_BATT_I_ADC (1 << 23)
|
||||
|
||||
#define PCAP_ADC_BANK_0 0
|
||||
#define PCAP_ADC_BANK_1 1
|
||||
/* ADC bank 0 */
|
||||
#define PCAP_ADC_CH_COIN 0
|
||||
#define PCAP_ADC_CH_BATT 1
|
||||
#define PCAP_ADC_CH_BPLUS 2
|
||||
#define PCAP_ADC_CH_MOBPORTB 3
|
||||
#define PCAP_ADC_CH_TEMPERATURE 4
|
||||
#define PCAP_ADC_CH_CHARGER_ID 5
|
||||
#define PCAP_ADC_CH_AD6 6
|
||||
/* ADC bank 1 */
|
||||
#define PCAP_ADC_CH_AD7 0
|
||||
#define PCAP_ADC_CH_AD8 1
|
||||
#define PCAP_ADC_CH_AD9 2
|
||||
#define PCAP_ADC_CH_TS_X1 3
|
||||
#define PCAP_ADC_CH_TS_X2 4
|
||||
#define PCAP_ADC_CH_TS_Y1 5
|
||||
#define PCAP_ADC_CH_TS_Y2 6
|
||||
|
||||
#define PCAP_ADC_T_NOW 0
|
||||
#define PCAP_ADC_T_IN_BURST 1
|
||||
#define PCAP_ADC_T_OUT_BURST 2
|
||||
|
||||
#define PCAP_ADC_ATO_IN_BURST 6
|
||||
#define PCAP_ADC_ATO_OUT_BURST 0
|
||||
|
||||
#define PCAP_ADC_TS_M_XY 1
|
||||
#define PCAP_ADC_TS_M_PRESSURE 2
|
||||
#define PCAP_ADC_TS_M_PLATE_X 3
|
||||
#define PCAP_ADC_TS_M_PLATE_Y 4
|
||||
#define PCAP_ADC_TS_M_STANDBY 5
|
||||
#define PCAP_ADC_TS_M_NONTS 6
|
||||
|
||||
#define PCAP_ADR_ADD1_MASK 0x000003ff
|
||||
#define PCAP_ADR_ADD1_SHIFT 0
|
||||
#define PCAP_ADR_ADD2_MASK 0x000ffc00
|
||||
#define PCAP_ADR_ADD2_SHIFT 10
|
||||
#define PCAP_ADR_ADINC1 (1 << 20)
|
||||
#define PCAP_ADR_ADINC2 (1 << 21)
|
||||
#define PCAP_ADR_ASC (1 << 22)
|
||||
#define PCAP_ADR_ONESHOT (1 << 23)
|
||||
|
||||
#define PCAP_BUSCTRL_FSENB (1 << 0)
|
||||
#define PCAP_BUSCTRL_USB_SUSPEND (1 << 1)
|
||||
#define PCAP_BUSCTRL_USB_PU (1 << 2)
|
||||
#define PCAP_BUSCTRL_USB_PD (1 << 3)
|
||||
#define PCAP_BUSCTRL_VUSB_EN (1 << 4)
|
||||
#define PCAP_BUSCTRL_USB_PS (1 << 5)
|
||||
#define PCAP_BUSCTRL_VUSB_MSTR_EN (1 << 6)
|
||||
#define PCAP_BUSCTRL_VBUS_PD_ENB (1 << 7)
|
||||
#define PCAP_BUSCTRL_CURRLIM (1 << 8)
|
||||
#define PCAP_BUSCTRL_RS232ENB (1 << 9)
|
||||
#define PCAP_BUSCTRL_RS232_DIR (1 << 10)
|
||||
#define PCAP_BUSCTRL_SE0_CONN (1 << 11)
|
||||
#define PCAP_BUSCTRL_USB_PDM (1 << 12)
|
||||
#define PCAP_BUSCTRL_BUS_PRI_ADJ (1 << 24)
|
||||
|
||||
/* leds */
|
||||
#define PCAP_LED0 0
|
||||
#define PCAP_LED1 1
|
||||
#define PCAP_BL0 2
|
||||
#define PCAP_BL1 3
|
||||
#define PCAP_VIB 4
|
||||
#define PCAP_LED_3MA 0
|
||||
#define PCAP_LED_4MA 1
|
||||
#define PCAP_LED_5MA 2
|
||||
#define PCAP_LED_9MA 3
|
||||
#define PCAP_LED_GPIO_VAL_MASK 0x00ffffff
|
||||
#define PCAP_LED_GPIO_EN 0x01000000
|
||||
#define PCAP_LED_GPIO_INVERT 0x02000000
|
||||
#define PCAP_LED_T_MASK 0xf
|
||||
#define PCAP_LED_C_MASK 0x3
|
||||
#define PCAP_BL_MASK 0x1f
|
||||
#define PCAP_BL0_SHIFT 0
|
||||
#define PCAP_LED0_EN (1 << 5)
|
||||
#define PCAP_LED1_EN (1 << 6)
|
||||
#define PCAP_LED0_T_SHIFT 7
|
||||
#define PCAP_LED1_T_SHIFT 11
|
||||
#define PCAP_LED0_C_SHIFT 15
|
||||
#define PCAP_LED1_C_SHIFT 17
|
||||
#define PCAP_BL1_SHIFT 20
|
||||
#define PCAP_VIB_MASK 0x3
|
||||
#define PCAP_VIB_SHIFT 20
|
||||
#define PCAP_VIB_EN (1 << 19)
|
||||
|
||||
/* RTC */
|
||||
#define PCAP_RTC_DAY_MASK 0x3fff
|
||||
#define PCAP_RTC_TOD_MASK 0xffff
|
||||
#define PCAP_RTC_PC_MASK 0x7
|
||||
#define SEC_PER_DAY 86400
|
||||
|
||||
#endif
|
Загрузка…
Ссылка в новой задаче