arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support
This patch adds basic i.MM8MN DDR4 EVK board support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Anson Huang
Shawn Guo
Родитель
ee8696be68
Коммит
13cb15e0a6
|
|
@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
|
|||
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
|
||||
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,221 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright 2019 NXP
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "imx8mn.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NXP i.MX8MNano DDR4 EVK board";
|
||||
compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
reg_usdhc2_vmmc: regulator-usdhc2 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
||||
regulator-name = "VSD_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
|
||||
pinctrl_fec1: fec1grp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
||||
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
||||
MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
||||
MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
||||
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
||||
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
||||
MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
||||
MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
||||
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
||||
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
||||
MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
||||
MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
||||
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
||||
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
||||
MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
||||
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_gpio: usdhc2grpgpio {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2: usdhc2grp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
||||
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
||||
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
||||
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
||||
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
||||
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
||||
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
||||
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
||||
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
||||
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
||||
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
||||
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
||||
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
||||
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
||||
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
||||
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
||||
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
||||
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
||||
MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
|
||||
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
|
||||
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
|
||||
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
|
||||
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
|
||||
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
|
||||
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
|
||||
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
|
||||
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
|
||||
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
|
||||
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
|
||||
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
|
||||
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
|
||||
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
|
||||
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
|
||||
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
|
||||
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
|
||||
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
|
||||
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
|
||||
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
|
||||
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
|
||||
MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
|
||||
MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
|
||||
MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
|
||||
MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
|
||||
MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
|
||||
MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
|
||||
MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
|
||||
MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
|
||||
MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
|
||||
MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_wdog: wdoggrp {
|
||||
fsl,pins = <
|
||||
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_fec1>;
|
||||
phy-mode = "rgmii-id";
|
||||
phy-handle = <ðphy0>;
|
||||
fsl,magic-packet;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
at803x,led-act-blind-workaround;
|
||||
at803x,eee-disabled;
|
||||
at803x,vddio-1p8v;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&snvs_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 { /* console */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
||||
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <®_usdhc2_vmmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||||
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdog1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdog>;
|
||||
fsl,ext-reset-output;
|
||||
status = "okay";
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче