s390/pci: separate zbus registration from scanning
Now that the zbus can be created without being scanned we can go one step further and make registering a device to a zbus independent from scanning it. This way the zbus handling becomes much more natural in that functions can be registered on the zbus to be scanned later more closely resembling the handling of both real PCI hardware and other virtual PCI busses like Hyper-V's virtual PCI bus (see for example drivers/pci/controller/pci-hyperv.c:create_root_hv_pci_bus()). Having zbus registration separate from scanning allows us to return fully initialized but still disabled zdevs from zpci_create_device() which can then be configured just as we would configure a zdev from standby (minus the SCLP Configure already done by the platform). There is still the exception that a PCI function with non-zero devfn can be plugged before its PCI bus, which depends on the function with zero devfn, is created. In this case the zdev returend from zpci_create_device() is still missing its bus, hotplug slot, and resources which need to be created later but at least it doesn't wait in the enabled state and can otherwise be treated as initialized. With this we also separate the initial PCI scan using CLP List PCI Functions into two phases. In the CLP loop's callback we only register each function with a virtual zbus creating the latter as needed. Then, after we have built this virtual PCI topology based on our list of zbusses, we can make use of the common code functionality to scan each complete zbus as a separate child bus. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This commit is contained in:
Родитель
0350276168
Коммит
14c87ba812
|
@ -201,7 +201,7 @@ extern unsigned int s390_pci_no_rid;
|
|||
Prototypes
|
||||
----------------------------------------------------------------------------- */
|
||||
/* Base stuff */
|
||||
int zpci_create_device(u32 fid, u32 fh, enum zpci_state state);
|
||||
struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state);
|
||||
int zpci_enable_device(struct zpci_dev *);
|
||||
int zpci_disable_device(struct zpci_dev *);
|
||||
int zpci_configure_device(struct zpci_dev *zdev, u32 fh);
|
||||
|
|
|
@ -690,9 +690,9 @@ int zpci_disable_device(struct zpci_dev *zdev)
|
|||
* Creates a new zpci device and adds it to its, possibly newly created, zbus
|
||||
* as well as zpci_list.
|
||||
*
|
||||
* Returns: 0 on success, an error value otherwise
|
||||
* Returns: the zdev on success or an error pointer otherwise
|
||||
*/
|
||||
int zpci_create_device(u32 fid, u32 fh, enum zpci_state state)
|
||||
struct zpci_dev *zpci_create_device(u32 fid, u32 fh, enum zpci_state state)
|
||||
{
|
||||
struct zpci_dev *zdev;
|
||||
int rc;
|
||||
|
@ -700,7 +700,7 @@ int zpci_create_device(u32 fid, u32 fh, enum zpci_state state)
|
|||
zpci_dbg(3, "add fid:%x, fh:%x, c:%d\n", fid, fh, state);
|
||||
zdev = kzalloc(sizeof(*zdev), GFP_KERNEL);
|
||||
if (!zdev)
|
||||
return -ENOMEM;
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
/* FID and Function Handle are the static/dynamic identifiers */
|
||||
zdev->fid = fid;
|
||||
|
@ -727,14 +727,14 @@ int zpci_create_device(u32 fid, u32 fh, enum zpci_state state)
|
|||
list_add_tail(&zdev->entry, &zpci_list);
|
||||
spin_unlock(&zpci_list_lock);
|
||||
|
||||
return 0;
|
||||
return zdev;
|
||||
|
||||
error_destroy_iommu:
|
||||
zpci_destroy_iommu(zdev);
|
||||
error:
|
||||
zpci_dbg(0, "add fid:%x, rc:%d\n", fid, rc);
|
||||
kfree(zdev);
|
||||
return rc;
|
||||
return ERR_PTR(rc);
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -959,6 +959,7 @@ static int __init pci_base_init(void)
|
|||
rc = clp_scan_pci_devices();
|
||||
if (rc)
|
||||
goto out_find;
|
||||
zpci_bus_scan_busses();
|
||||
|
||||
s390_pci_initialized = 1;
|
||||
return 0;
|
||||
|
|
|
@ -160,6 +160,23 @@ int zpci_bus_scan_bus(struct zpci_bus *zbus)
|
|||
return ret;
|
||||
}
|
||||
|
||||
/* zpci_bus_scan_busses - Scan all registered busses
|
||||
*
|
||||
* Scan all available zbusses
|
||||
*
|
||||
*/
|
||||
void zpci_bus_scan_busses(void)
|
||||
{
|
||||
struct zpci_bus *zbus = NULL;
|
||||
|
||||
mutex_lock(&zbus_list_lock);
|
||||
list_for_each_entry(zbus, &zbus_list, bus_next) {
|
||||
zpci_bus_scan_bus(zbus);
|
||||
cond_resched();
|
||||
}
|
||||
mutex_unlock(&zbus_list_lock);
|
||||
}
|
||||
|
||||
/* zpci_bus_create_pci_bus - Create the PCI bus associated with this zbus
|
||||
* @zbus: the zbus holding the zdevices
|
||||
* @f0: function 0 of the bus
|
||||
|
@ -387,24 +404,6 @@ int zpci_bus_device_register(struct zpci_dev *zdev, struct pci_ops *ops)
|
|||
if (rc)
|
||||
goto error;
|
||||
|
||||
if (zdev->state != ZPCI_FN_STATE_CONFIGURED)
|
||||
return 0;
|
||||
|
||||
/* the PCI function will be scanned once function 0 appears */
|
||||
if (!zdev->zbus->bus)
|
||||
return 0;
|
||||
|
||||
/* For function 0 scan whole bus as we might have to pick up existing
|
||||
* functions waiting for it to allow creating the PCI bus
|
||||
*/
|
||||
if (zdev->devfn == 0 && zdev->zbus->multifunction)
|
||||
rc = zpci_bus_scan_bus(zdev->zbus);
|
||||
else
|
||||
rc = zpci_bus_scan_device(zdev);
|
||||
|
||||
if (rc)
|
||||
goto error;
|
||||
|
||||
return 0;
|
||||
|
||||
error:
|
||||
|
|
|
@ -11,6 +11,7 @@ int zpci_bus_device_register(struct zpci_dev *zdev, struct pci_ops *ops);
|
|||
void zpci_bus_device_unregister(struct zpci_dev *zdev);
|
||||
|
||||
int zpci_bus_scan_bus(struct zpci_bus *zbus);
|
||||
void zpci_bus_scan_busses(void);
|
||||
|
||||
int zpci_bus_scan_device(struct zpci_dev *zdev);
|
||||
void zpci_bus_remove_device(struct zpci_dev *zdev, bool set_error);
|
||||
|
|
|
@ -104,13 +104,15 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
|
|||
switch (ccdf->pec) {
|
||||
case 0x0301: /* Reserved|Standby -> Configured */
|
||||
if (!zdev) {
|
||||
zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_CONFIGURED);
|
||||
break;
|
||||
zdev = zpci_create_device(ccdf->fid, ccdf->fh, ZPCI_FN_STATE_CONFIGURED);
|
||||
if (IS_ERR(zdev))
|
||||
break;
|
||||
} else {
|
||||
/* the configuration request may be stale */
|
||||
if (zdev->state != ZPCI_FN_STATE_STANDBY)
|
||||
break;
|
||||
zdev->state = ZPCI_FN_STATE_CONFIGURED;
|
||||
}
|
||||
/* the configuration request may be stale */
|
||||
if (zdev->state != ZPCI_FN_STATE_STANDBY)
|
||||
break;
|
||||
zdev->state = ZPCI_FN_STATE_CONFIGURED;
|
||||
zpci_configure_device(zdev, ccdf->fh);
|
||||
break;
|
||||
case 0x0302: /* Reserved -> Standby */
|
||||
|
|
Загрузка…
Ссылка в новой задаче