thermal: exynos: Provide separate TMU data for Exynos4412

Up till now Exynos5250 and Exynos4412 had the same definitions for TMU
data. Following commit changes that, by introducing separate
exynos4412_default_tmu_data structure.

Since Exynos4412 was chronologically first, the corresponding name for
TMU registers and default data was renamed.

Additionally, new SOC_ARCH_EXYNOS4412 type has been defined.

Moreover, the SOC_ARCH_EXYNOS name has been changed to SOC_ARCH_EXYNOS5250.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

drivers/thermal/samsung/exynos_tmu.c

@@ -488,7 +488,7 @@ static const struct of_device_id exynos_tmu_match[] = {
 	},
 	{
 		.compatible = "samsung,exynos4412-tmu",
-		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
+		.data = (void *)EXYNOS4412_TMU_DRV_DATA,
 	},
 	{
 		.compatible = "samsung,exynos5250-tmu",
@@ -629,9 +629,10 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (pdata->type == SOC_ARCH_EXYNOS ||
-		pdata->type == SOC_ARCH_EXYNOS4210 ||
-				pdata->type == SOC_ARCH_EXYNOS5440)
+	if (pdata->type == SOC_ARCH_EXYNOS4210 ||
+	    pdata->type == SOC_ARCH_EXYNOS4412 ||
+	    pdata->type == SOC_ARCH_EXYNOS5250 ||
+	    pdata->type == SOC_ARCH_EXYNOS5440)
 		data->soc = pdata->type;
 	else {
 		ret = -EINVAL;

drivers/thermal/samsung/exynos_tmu.h

@@ -41,7 +41,8 @@ enum calibration_mode {
 
 enum soc_type {
 	SOC_ARCH_EXYNOS4210 = 1,
-	SOC_ARCH_EXYNOS,
+	SOC_ARCH_EXYNOS4412,
+	SOC_ARCH_EXYNOS5250,
 	SOC_ARCH_EXYNOS5440,
 };
 

drivers/thermal/samsung/exynos_tmu_data.c

@@ -90,8 +90,8 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
 };
 #endif
 
-#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
-static const struct exynos_tmu_registers exynos5250_tmu_registers = {
+#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
+static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
 	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
 	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
@@ -128,7 +128,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
 	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
 };
 
-#define EXYNOS5250_TMU_DATA \
+#define EXYNOS4412_TMU_DATA \
 	.threshold_falling = 10, \
 	.trigger_levels[0] = 85, \
 	.trigger_levels[1] = 103, \
@@ -162,15 +162,31 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = {
 		.temp_level = 103, \
 	}, \
 	.freq_tab_count = 2, \
-	.type = SOC_ARCH_EXYNOS, \
-	.registers = &exynos5250_tmu_registers, \
+	.registers = &exynos4412_tmu_registers, \
 	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
 			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
 			TMU_SUPPORT_EMUL_TIME)
+#endif
 
+#if defined(CONFIG_SOC_EXYNOS4412)
+struct exynos_tmu_init_data const exynos4412_default_tmu_data = {
+	.tmu_data = {
+		{
+			EXYNOS4412_TMU_DATA,
+			.type = SOC_ARCH_EXYNOS4412,
+		},
+	},
+	.tmu_count = 1,
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
 struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 	.tmu_data = {
-		{ EXYNOS5250_TMU_DATA },
+		{
+			EXYNOS4412_TMU_DATA,
+			.type = SOC_ARCH_EXYNOS5250,
+		},
 	},
 	.tmu_count = 1,
 };

drivers/thermal/samsung/exynos_tmu_data.h

@@ -138,7 +138,14 @@ extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
 #define EXYNOS4210_TMU_DRV_DATA (NULL)
 #endif
 
-#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412))
+#if defined(CONFIG_SOC_EXYNOS4412)
+extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
+#define EXYNOS4412_TMU_DRV_DATA (&exynos4412_default_tmu_data)
+#else
+#define EXYNOS4412_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
 extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
 #define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
 #else