microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Second Round of Renesas ARM Based SoC DT Updates for v4.16 

* r8a7745 (RZ/G1E) SoC
   - Enable SMP
 
     Fabrizio Castro says "Add DT node for the Advanced Power Management
     Unit (APMU), add the second CPU core, and use "renesas,apmu" as
     "enable-method"."
 
 * r8a7743 (RZ/G1M) SoC
   - Add node for thermal sensor module with thermal-zone support
 
 * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
   - Add:
     + Renesas Core Match Timer (CMT) support
     + Renesas Timer Pulse Unit PWM Controller (TPU) support
     + Renesas PWM Timer Controller (PWM) support
 
 * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
   r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
   - Add sound support
 
 * r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
   - Allow DTBs of boards of these SoCs to build without any warnings when
     compiled with W=1 using gcc-linaro-5.4.1-2017.05
     + Move nodes which have no reg property out of bus, they don't belong there
     + Also sort sub-nodes of root node to allow for easier maintenance
 
 * r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
   - Correct critical CPU temperature
 
     Chris Paterson says "The current R-Car Gen2 device trees define the CPU
     critical temperature as 115°C.
 
     The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
     sensor has an accuracy of ±5°C and there can be a temperature
     difference of 1 or 2 degrees between Tjmax and the thermal sensor due
     to the location of the latter.
 
     This means that 95°C is a safer value to use.
 
     This value should also apply to r8a7792 but thermal sensor support has
     not been added yet."
 
 * r8a7740 (R-Mobile A1) SoC
   - Correct TPU register block size
 
     Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
     outside the declared register block.  Enlarge the register block size to
     fix this.
 
     This was probably based on the old platform code, which also assumed a
     register block size of 0x100."
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlo83NsACgkQ189kaWo3
 T75/Ug/+K0JFjXfzVGLLhQ0GYV+nJLD2Rz5J0WOISZSKQ2MMuIDNPYa/r2edOzkV
 qp75Fjp0FE0XvYQQwPsKSY8Nt0CRg1j/wYw9wMvJZ1lJUgeL9DuLhzqZ2mlvv0v9
 gLaZau011QpKv3k/MoOVEPOUrKBSqhBJaTZ3ufv/tYvpI/if//8jRafdkLPzSPcQ
 IktmihGIiB2uJeCwZsEfhn3kWvjc4PegVbL6jkTrHd21oDA7KYnCLP7XBi3eut1C
 smVzcN+NofAIDgk7x+R6XdEl6bJejUEox/ixk/HgJ2yjD2bsI8ILL6Mx2BKREg6x
 oYJlmXo6/XNep+9H45JaTCgRJfzhfFQu15PAYE8qROeGcoFm7tnGLXYe0zEaXy9G
 K22dkZog+uLpwCeHpXYsXFDknhQPds3a/nd4crpVlmsnfuhdLYwAn4IxWnBBl/SV
 u9xHegfrexqT8pE44JDA+cWqGQz2gss33pBejJqB+3HEijg/CQ43eZbQVEYpMx01
 a/9mQqJvk3IyC6EyzxMWfq9k8e0rcq6APRu+dd2oPyUTVNKgWuQXHHyyzIlzn55w
 NvbUf5W6wyxa/kA2l8XeBHToKAn1pBbhEakIF1tGYKB1a8AfHbuHXeuXLFLNmQDN
 3ON16LEEzqBlHjn2kxHG/gbFUTHXDl1gwBPo92CATuHe+P8TG+Q=
 =2oL+
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.16

* r8a7745 (RZ/G1E) SoC
  - Enable SMP

    Fabrizio Castro says "Add DT node for the Advanced Power Management
    Unit (APMU), add the second CPU core, and use "renesas,apmu" as
    "enable-method"."

* r8a7743 (RZ/G1M) SoC
  - Add node for thermal sensor module with thermal-zone support

* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
  - Add:
    + Renesas Core Match Timer (CMT) support
    + Renesas Timer Pulse Unit PWM Controller (TPU) support
    + Renesas PWM Timer Controller (PWM) support

* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
  r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
  - Add sound support

* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
  - Allow DTBs of boards of these SoCs to build without any warnings when
    compiled with W=1 using gcc-linaro-5.4.1-2017.05
    + Move nodes which have no reg property out of bus, they don't belong there
    + Also sort sub-nodes of root node to allow for easier maintenance

* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
  - Correct critical CPU temperature

    Chris Paterson says "The current R-Car Gen2 device trees define the CPU
    critical temperature as 115°C.

    The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
    sensor has an accuracy of ±5°C and there can be a temperature
    difference of 1 or 2 degrees between Tjmax and the thermal sensor due
    to the location of the latter.

    This means that 95°C is a safer value to use.

    This value should also apply to r8a7792 but thermal sensor support has
    not been added yet."

* r8a7740 (R-Mobile A1) SoC
  - Correct TPU register block size

    Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
    outside the declared register block.  Enlarge the register block size to
    fix this.

    This was probably based on the old platform code, which also assumed a
    register block size of 0x100."

* tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits)
  ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
  ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
  ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
  ARM: dts: iwg22d-sodimm: Sound PIO support
  ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
  ARM: dts: r8a7745: Add sound support
  ARM: dts: r8a7745: Add audio DMAC support
  ARM: dts: r8a7745: Add audio clocks
  ARM: dts: r8a7740: Correct TPU register block size
  ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
  ARM: dts: r8a7743: sort root sub-nodes alphabetically
  ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
  ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
  ARM: dts: iwg20d-q7-common: Sound PIO support
  ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
  ARM: dts: r8a7792: move timer node out of bus
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2018-01-04 22:51:06 -08:00
Родитель 052f6026cc 5b06201067
Коммит 150daec9dc
9 изменённых файлов: 1052 добавлений и 109 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

88
arch/arm/boot/dts/iwg20d-q7-common.dtsi
Просмотреть файл

@ -8,6 +8,29 @@
* kind, whether express or implied.
*/
/*
* SSI-SGTL5000
*
* This command is required when Playback/Capture
*
* amixer set "DVC Out" 100%
* amixer set "DVC In" 100%
*
* You can use Mute
*
* amixer set "DVC Out Mute" on
* amixer set "DVC In Mute" on
*
* You can use Volume Ramp
*
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
* amixer set "DVC Out Ramp" on
* aplay xxx.wav &
* amixer set "DVC Out" 80% // Volume Down
* amixer set "DVC Out" 100% // Volume Up
*/
/ {
aliases {
serial0 = &scif0;
@ -20,6 +43,36 @@
stdout-path = "serial0:115200n8";
};
audio_clock: audio_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
reg_1p5v: 1p5v {
compatible = "regulator-fixed";
regulator-name = "1P5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
rsnd_sgtl5000: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
};
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
@ -83,6 +136,16 @@
compatible = "ti,bq32000";
reg = <0x68>;
};
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
clocks = <&audio_clock>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p5v>;
};
};
&pci0 {
@ -142,6 +205,11 @@
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@ -153,6 +221,22 @@
};
};
&rcar_sound {
pinctrl-0 = <&sound_pins>;
pinctrl-names = "default";
status = "okay";
/* Single DAI */
#sound-dai-cells = <0>;
rcar_sound,dai {
dai0 {
playback = <&ssi1 &src3 &dvc1>;
capture = <&ssi0 &src2 &dvc0>;
};
};
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
@ -181,6 +265,10 @@
status = "okay";
};
&ssi1 {
shared-pin;
};
&usbphy {
status = "okay";
};

2
arch/arm/boot/dts/r8a7740.dtsi
Просмотреть файл

@ -317,7 +317,7 @@
tpu: pwm@e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
reg = <0xe6600000 0x148>;
clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
power-domains = <&pd_a3sp>;
status = "disabled";

488
arch/arm/boot/dts/r8a7743.dtsi
Просмотреть файл

@ -37,6 +37,37 @@
vin2 = &vin2;
};
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
* Boards that provide audio clocks should override them.
*/
audio_clk_a: audio_clk_a {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clk_b: audio_clk_b {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clk_c: audio_clk_c {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -79,6 +110,29 @@
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External PCIe clock - can be overridden by the board */
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@ -250,16 +304,48 @@
resets = <&cpg 407>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>;
thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7743",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
cmt0: timer@ffca0000 {
compatible = "renesas,r8a7743-cmt0",
"renesas,rcar-gen2-cmt0";
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 124>;
status = "disabled";
};
cmt1: timer@e6130000 {
compatible = "renesas,r8a7743-cmt1",
"renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 329>;
status = "disabled";
};
cpg: clock-controller@e6150000 {
@ -359,6 +445,68 @@
dma-channels = <15>;
};
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
audma1: dma-controller@ec720000 {
compatible = "renesas,dmac-r8a7743",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7743-usb-dmac",
"renesas,usb-dmac";
@ -956,6 +1104,86 @@
status = "disabled";
};
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm1: pwm@e6e31000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e31000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@e6e32000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e32000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@e6e33000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e33000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@e6e34000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e34000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm5: pwm@e6e35000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e35000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm6: pwm@e6e36000 {
compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar";
reg = <0 0xe6e36000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
tpu: pwm@e60f0000 {
compatible = "renesas,tpu-r8a7743", "renesas,tpu";
reg = <0 0xe60f0000 0 0x148>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7743",
"renesas,rcar-gen2-sdhi";
@ -1228,14 +1456,219 @@
resets = <&cpg 319>;
status = "disabled";
};
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
* Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
* Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
*/
compatible = "renesas,rcar_sound-r8a7743",
"renesas,rcar_sound-gen2";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
<&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
<&cpg CPG_CORE R8A7743_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
"ctu.0", "ctu.1",
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 1005>,
<&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
<&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
<&cpg 1014>, <&cpg 1015>;
reset-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
rcar_sound,dvc {
dvc0: dvc-0 {
dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
mix0: mix-0 { };
mix1: mix-1 { };
};
rcar_sound,ctu {
ctu00: ctu-0 { };
ctu01: ctu-1 { };
ctu02: ctu-2 { };
ctu03: ctu-3 { };
ctu10: ctu-4 { };
ctu11: ctu-5 { };
ctu12: ctu-6 { };
ctu13: ctu-7 { };
};
rcar_sound,src {
src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
};
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <95000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
timer {
compatible = "arm,armv7-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
/* External USB clock - can be overridden by the board */
@ -1244,27 +1677,4 @@
#clock-cells = <0>;
clock-frequency = <48000000>;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External PCIe clock - can be overridden by the board */
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
};

92
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
Просмотреть файл

@ -8,6 +8,29 @@
* kind, whether express or implied.
*/
/*
* SSI-SGTL5000
*
* This command is required when Playback/Capture
*
* amixer set "DVC Out" 100%
* amixer set "DVC In" 100%
*
* You can use Mute
*
* amixer set "DVC Out Mute" on
* amixer set "DVC In Mute" on
*
* You can use Volume Ramp
*
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
* amixer set "DVC Out Ramp" on
* aplay xxx.wav &
* amixer set "DVC Out" 80% // Volume Down
* amixer set "DVC Out" 100% // Volume Up
*/
/dts-v1/;
#include "r8a7745-iwg22m.dtsi"
@ -26,6 +49,27 @@
stdout-path = "serial3:115200n8";
};
audio_clock: audio_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
rsnd_sgtl5000: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&sgtl5000>;
};
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
@ -80,6 +124,23 @@
pinctrl-names = "default";
};
&i2c5 {
pinctrl-0 = <&i2c5_pins>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <400000>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
#sound-dai-cells = <0>;
reg = <0x0a>;
clocks = <&audio_clock>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
};
&pci1 {
status = "okay";
pinctrl-0 = <&usb1_pins>;
@ -102,6 +163,11 @@
function = "hscif1";
};
i2c5_pins: i2c5 {
groups = "i2c5_b";
function = "i2c5";
};
scif4_pins: scif4 {
groups = "scif4_data_b";
function = "scif4";
@ -113,6 +179,11 @@
power-source = <3300>;
};
sound_pins: sound {
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
function = "ssi";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@ -124,6 +195,23 @@
};
};
&rcar_sound {
pinctrl-0 = <&sound_pins>;
pinctrl-names = "default";
status = "okay";
/* Single DAI */
#sound-dai-cells = <0>;
rcar_sound,dai {
dai0 {
playback = <&ssi3 &src3 &dvc0>;
capture = <&ssi4 &src4 &dvc1>;
};
};
};
&scif4 {
pinctrl-0 = <&scif4_pins>;
pinctrl-names = "default";
@ -141,6 +229,10 @@
status = "okay";
};
&ssi4 {
shared-pin;
};
&usbphy {
status = "okay";
};

421
arch/arm/boot/dts/r8a7745.dtsi
Просмотреть файл

@ -35,9 +35,39 @@
vin1 = &vin1;
};
/*
* The external audio clocks are configured as 0 Hz fixed
* frequency clocks by default. Boards that provide audio
* clocks should override them.
*/
audio_clka: audio_clka {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clkb: audio_clkb {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
audio_clkc: audio_clkc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
@ -49,6 +79,16 @@
next-level-cache = <&L2_CA7>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
power-domains = <&sysc R8A7745_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
L2_CA7: cache-controller-0 {
compatible = "cache";
cache-unified;
@ -57,6 +97,22 @@
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@ -65,6 +121,12 @@
#size-cells = <2>;
ranges;
apmu@e6151000 {
compatible = "renesas,r8a7745-apmu", "renesas,apmu";
reg = <0 0xe6151000 0 0x188>;
cpus = <&cpu0 &cpu1>;
};
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@ -207,16 +269,36 @@
resets = <&cpg 407>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>;
cmt0: timer@ffca0000 {
compatible = "renesas,r8a7745-cmt0",
"renesas,rcar-gen2-cmt0";
reg = <0 0xffca0000 0 0x1004>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 124>;
status = "disabled";
};
cmt1: timer@e6130000 {
compatible = "renesas,r8a7745-cmt1",
"renesas,rcar-gen2-cmt1";
reg = <0 0xe6130000 0 0x1004>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 329>;
status = "disabled";
};
cpg: clock-controller@e6150000 {
@ -316,6 +398,37 @@
dma-channels = <15>;
};
audma0: dma-controller@ec700000 {
compatible = "renesas,dmac-r8a7745",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12";
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7745-usb-dmac",
"renesas,usb-dmac";
@ -920,6 +1033,86 @@
status = "disabled";
};
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm1: pwm@e6e31000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e31000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@e6e32000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e32000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@e6e33000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e33000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@e6e34000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e34000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm5: pwm@e6e35000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e35000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
pwm6: pwm@e6e36000 {
compatible = "renesas,pwm-r8a7745", "renesas,pwm-rcar";
reg = <0 0xe6e36000 0 0x8>;
clocks = <&cpg CPG_MOD 523>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 523>;
#pwm-cells = <2>;
status = "disabled";
};
tpu: pwm@e60f0000 {
compatible = "renesas,tpu-r8a7745", "renesas,tpu";
reg = <0 0xe60f0000 0 0x148>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7745",
"renesas,rcar-gen2-sdhi";
@ -1101,14 +1294,194 @@
resets = <&cpg 915>;
status = "disabled";
};
rcar_sound: sound@ec500000 {
/*
* #sound-dai-cells is required
*
* Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
* Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
*/
compatible = "renesas,rcar_sound-r8a7745",
"renesas,rcar_sound-gen2";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri */
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
<&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
<&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
<&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
<&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clka>, <&audio_clkb>, <&audio_clkc>,
<&cpg CPG_CORE R8A7745_CLK_M2>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6",
"ssi.5", "ssi.4", "ssi.3", "ssi.2",
"ssi.1", "ssi.0",
"src.6", "src.5", "src.4", "src.3",
"src.2", "src.1",
"ctu.0", "ctu.1",
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
resets = <&cpg 1005>,
<&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
<&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
<&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
<&cpg 1015>;
reset-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6",
"ssi.5", "ssi.4", "ssi.3", "ssi.2",
"ssi.1", "ssi.0";
status = "disabled";
rcar_sound,dvc {
dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
mix0: mix-0 { };
mix1: mix-1 { };
};
rcar_sound,ctu {
ctu00: ctu-0 { };
ctu01: ctu-1 { };
ctu02: ctu-2 { };
ctu03: ctu-3 { };
ctu10: ctu-4 { };
ctu11: ctu-5 { };
ctu12: ctu-6 { };
ctu13: ctu-7 { };
};
rcar_sound,src {
src-0 {
status = "disabled";
};
src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma0 0x9c>;
dma-names = "rx", "tx";
};
src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma0 0x9e>;
dma-names = "rx", "tx";
};
src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma0 0xa0>;
dma-names = "rx", "tx";
};
src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma0 0xb0>;
dma-names = "rx", "tx";
};
src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma0 0xb2>;
dma-names = "rx", "tx";
};
src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma0 0xb4>;
dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma0 0x02>,
<&audma0 0x15>, <&audma0 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma0 0x04>,
<&audma0 0x49>, <&audma0 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma0 0x06>,
<&audma0 0x63>, <&audma0 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma0 0x08>,
<&audma0 0x6f>, <&audma0 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma0 0x0a>,
<&audma0 0x71>, <&audma0 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma0 0x0c>,
<&audma0 0x73>, <&audma0 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma0 0x0e>,
<&audma0 0x75>, <&audma0 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma0 0x10>,
<&audma0 0x79>, <&audma0 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma0 0x12>,
<&audma0 0x7b>, <&audma0 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma0 0x14>,
<&audma0 0x7d>, <&audma0 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
};
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
timer {
compatible = "arm,armv7-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
/* External USB clock - can be overridden by the board */
@ -1117,20 +1490,4 @@
#clock-cells = <0>;
clock-frequency = <48000000>;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
};

2
arch/arm/boot/dts/r8a7790.dtsi
Просмотреть файл

@ -168,7 +168,7 @@
trips {
cpu-crit {
temperature = <115000>;
temperature = <95000>;
hysteresis = <0>;
type = "critical";
};

2
arch/arm/boot/dts/r8a7791.dtsi
Просмотреть файл

@ -92,7 +92,7 @@
trips {
cpu-crit {
temperature = <115000>;
temperature = <95000>;
hysteresis = <0>;
type = "critical";
};

64
arch/arm/boot/dts/r8a7792.dtsi
Просмотреть файл

@ -36,6 +36,14 @@
vin5 = &vin5;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
@ -69,6 +77,22 @@
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@ -113,18 +137,6 @@
resets = <&cpg 407>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_LOW)>;
};
rst: reset-controller@e6160000 {
compatible = "renesas,r8a7792-rst";
reg = <0 0xe6160000 0 0x0100>;
@ -834,27 +846,11 @@
};
};
/* External root clock */
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External SCIF clock */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
};
/* External CAN clock */
can_clk: can {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
timer {
compatible = "arm,armv7-timer";
interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
};

2
arch/arm/boot/dts/r8a7793.dtsi
Просмотреть файл

@ -89,7 +89,7 @@
trips {
cpu-crit {
temperature = <115000>;
temperature = <95000>;
hysteresis = <0>;
type = "critical";
};