dt-bindings: leds: add pca955x
This adds the devicetree bindings for the PCA955x I2C LED blinkers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This commit is contained in:
Родитель
561099a1a2
Коммит
15201b5de9
|
@ -0,0 +1,88 @@
|
|||
* NXP - pca955x LED driver
|
||||
|
||||
The PCA955x family of chips are I2C LED blinkers whose pins not used
|
||||
to control LEDs can be used as general purpose I/Os. The GPIO pins can
|
||||
be input or output, and output pins can also be pulse-width controlled.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be one of :
|
||||
"nxp,pca9550"
|
||||
"nxp,pca9551"
|
||||
"nxp,pca9552"
|
||||
"nxp,pca9553"
|
||||
- #address-cells: must be 1
|
||||
- #size-cells: must be 0
|
||||
- reg: I2C slave address. depends on the model.
|
||||
|
||||
Optional properties:
|
||||
- gpio-controller: allows pins to be used as GPIOs.
|
||||
- #gpio-cells: must be 2.
|
||||
- gpio-line-names: define the names of the GPIO lines
|
||||
|
||||
LED sub-node properties:
|
||||
- reg : number of LED line.
|
||||
from 0 to 1 for the pca9550
|
||||
from 0 to 7 for the pca9551
|
||||
from 0 to 15 for the pca9552
|
||||
from 0 to 3 for the pca9553
|
||||
- type: (optional) either
|
||||
PCA9532_TYPE_NONE
|
||||
PCA9532_TYPE_LED
|
||||
PCA9532_TYPE_GPIO
|
||||
see dt-bindings/leds/leds-pca955x.h (default to LED)
|
||||
- label : (optional)
|
||||
see Documentation/devicetree/bindings/leds/common.txt
|
||||
- linux,default-trigger : (optional)
|
||||
see Documentation/devicetree/bindings/leds/common.txt
|
||||
|
||||
Examples:
|
||||
|
||||
pca9552: pca9552@60 {
|
||||
compatible = "nxp,pca9552";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x60>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
|
||||
|
||||
gpio@12 {
|
||||
reg = <12>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@13 {
|
||||
reg = <13>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@14 {
|
||||
reg = <14>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@15 {
|
||||
reg = <15>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
|
||||
led@0 {
|
||||
label = "red:power";
|
||||
linux,default-trigger = "default-on";
|
||||
reg = <0>;
|
||||
type = <PCA955X_TYPE_LED>;
|
||||
};
|
||||
led@1 {
|
||||
label = "green:power";
|
||||
reg = <1>;
|
||||
type = <PCA955X_TYPE_LED>;
|
||||
};
|
||||
led@2 {
|
||||
label = "pca9552:yellow";
|
||||
reg = <2>;
|
||||
type = <PCA955X_TYPE_LED>;
|
||||
};
|
||||
led@3 {
|
||||
label = "pca9552:white";
|
||||
reg = <3>;
|
||||
type = <PCA955X_TYPE_LED>;
|
||||
};
|
||||
};
|
Загрузка…
Ссылка в новой задаче