Merge commit 'v2.6.36-rc7' into core/memblock

Merge reason: Update from -rc3 to -rc7.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2010-10-08 09:14:51 +02:00
Родитель 5fd03ddab7 cb655d0f3d
Коммит 153db80f8c
964 изменённых файлов: 10076 добавлений и 5634 удалений

Просмотреть файл

@ -3554,12 +3554,12 @@ E: cvance@nai.com
D: portions of the Linux Security Module (LSM) framework and security modules
N: Petr Vandrovec
E: vandrove@vc.cvut.cz
E: petr@vandrovec.name
D: Small contributions to ncpfs
D: Matrox framebuffer driver
S: Chudenicka 8
S: 10200 Prague 10, Hostivar
S: Czech Republic
S: 21513 Conradia Ct
S: Cupertino, CA 95014
S: USA
N: Thibaut Varene
E: T-Bone@parisc-linux.org

Просмотреть файл

@ -46,7 +46,6 @@
<sect1><title>Atomic and pointer manipulation</title>
!Iarch/x86/include/asm/atomic.h
!Iarch/x86/include/asm/unaligned.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>

Просмотреть файл

@ -57,7 +57,6 @@
</para>
<sect1><title>String Conversions</title>
!Ilib/vsprintf.c
!Elib/vsprintf.c
</sect1>
<sect1><title>String Manipulation</title>

Просмотреть файл

@ -1961,6 +1961,12 @@ machines due to caching.
</sect1>
</chapter>
<chapter id="apiref">
<title>Mutex API reference</title>
!Iinclude/linux/mutex.h
!Ekernel/mutex.c
</chapter>
<chapter id="references">
<title>Further reading</title>

Просмотреть файл

@ -104,4 +104,9 @@
<title>Block IO</title>
!Iinclude/trace/events/block.h
</chapter>
<chapter id="workqueue">
<title>Workqueue</title>
!Iinclude/trace/events/workqueue.h
</chapter>
</book>

Просмотреть файл

@ -0,0 +1,45 @@
CFQ ioscheduler tunables
========================
slice_idle
----------
This specifies how long CFQ should idle for next request on certain cfq queues
(for sequential workloads) and service trees (for random workloads) before
queue is expired and CFQ selects next queue to dispatch from.
By default slice_idle is a non-zero value. That means by default we idle on
queues/service trees. This can be very helpful on highly seeky media like
single spindle SATA/SAS disks where we can cut down on overall number of
seeks and see improved throughput.
Setting slice_idle to 0 will remove all the idling on queues/service tree
level and one should see an overall improved throughput on faster storage
devices like multiple SATA/SAS disks in hardware RAID configuration. The down
side is that isolation provided from WRITES also goes down and notion of
IO priority becomes weaker.
So depending on storage and workload, it might be useful to set slice_idle=0.
In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
keeping slice_idle enabled should be useful. For any configurations where
there are multiple spindles behind single LUN (Host based hardware RAID
controller or for storage arrays), setting slice_idle=0 might end up in better
throughput and acceptable latencies.
CFQ IOPS Mode for group scheduling
===================================
Basic CFQ design is to provide priority based time slices. Higher priority
process gets bigger time slice and lower priority process gets smaller time
slice. Measuring time becomes harder if storage is fast and supports NCQ and
it would be better to dispatch multiple requests from multiple cfq queues in
request queue at a time. In such scenario, it is not possible to measure time
consumed by single queue accurately.
What is possible though is to measure number of requests dispatched from a
single queue and also allow dispatch from multiple cfq queue at the same time.
This effectively becomes the fairness in terms of IOPS (IO operations per
second).
If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
to IOPS mode and starts providing fairness in terms of number of requests
dispatched. Note that this mode switching takes effect only for group
scheduling. For non-cgroup users nothing should change.

Просмотреть файл

@ -217,6 +217,7 @@ Details of cgroup files
CFQ sysfs tunable
=================
/sys/block/<disk>/queue/iosched/group_isolation
-----------------------------------------------
If group_isolation=1, it provides stronger isolation between groups at the
expense of throughput. By default group_isolation is 0. In general that
@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
and one wants stronger isolation between groups, then set group_isolation=1
but this will come at cost of reduced throughput.
/sys/block/<disk>/queue/iosched/slice_idle
------------------------------------------
On a faster hardware CFQ can be slow, especially with sequential workload.
This happens because CFQ idles on a single queue and single queue might not
drive deeper request queue depths to keep the storage busy. In such scenarios
one can try setting slice_idle=0 and that would switch CFQ to IOPS
(IO operations per second) mode on NCQ supporting hardware.
That means CFQ will not idle between cfq queues of a cfq group and hence be
able to driver higher queue depth and achieve better throughput. That also
means that cfq provides fairness among groups in terms of IOPS and not in
terms of disk time.
/sys/block/<disk>/queue/iosched/group_idle
------------------------------------------
If one disables idling on individual cfq queues and cfq service trees by
setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
on the group in an attempt to provide fairness among groups.
By default group_idle is same as slice_idle and does not do anything if
slice_idle is enabled.
One can experience an overall throughput drop if you have created multiple
groups and put applications in that group which are not driving enough
IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
on individual groups and throughput should improve.
What works
==========
- Currently only sync IO queues are support. All the buffered writes are

Просмотреть файл

@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
If you want to initialize a structure with an invalid GPIO number, use
some negative number (perhaps "-EINVAL"); that will never be valid. To
test if a number could reference a GPIO, you may use this predicate:
test if such number from such a structure could reference a GPIO, you
may use this predicate:
int gpio_is_valid(int number);
A number that's not valid will be rejected by calls which may request
or free GPIOs (see below). Other numbers may also be rejected; for
example, a number might be valid but unused on a given board.
Whether a platform supports multiple GPIO controllers is currently a
platform-specific implementation issue.
example, a number might be valid but temporarily unused on a given board.
Whether a platform supports multiple GPIO controllers is a platform-specific
implementation issue, as are whether that support can leave "holes" in the space
of GPIO numbers, and whether new controllers can be added at runtime. Such issues
can affect things including whether adjacent GPIO numbers are both valid.
Using GPIOs
-----------
@ -480,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
They may also want to provide a custom value for ARCH_NR_GPIOS.
ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
It may also provide a custom value for ARCH_NR_GPIOS, so that it better
reflects the number of GPIOs in actual use on that platform, without
wasting static table space. (It should count both built-in/SoC GPIOs and
also ones on GPIO expanders.
ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
into the kernel on that architecture.
ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
can enable it and build it into the kernel optionally.
If neither of these options are selected, the platform does not support

Просмотреть файл

@ -91,12 +91,11 @@ name The chip name.
I2C devices get this attribute created automatically.
RO
update_rate The rate at which the chip will update readings.
update_interval The interval at which the chip will update readings.
Unit: millisecond
RW
Some devices have a variable update rate. This attribute
can be used to change the update rate to the desired
frequency.
Some devices have a variable update rate or interval.
This attribute can be used to change it to the desired value.
************

Просмотреть файл

@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
section titled <section title> from <filename>.
Spaces are allowed in <section title>; do not quote the <section title>.
!C<filename> is replaced by nothing, but makes the tools check that
all DOC: sections and documented functions, symbols, etc. are used.
This makes sense to use when you use !F/!P only and want to verify
that all documentation is included.
Tim.
*/ <twaugh@redhat.com>

Просмотреть файл

@ -1974,15 +1974,18 @@ and is between 256 and 4096 characters. It is defined in the file
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
pcie_ports= [PCIE] PCIe ports handling:
auto Ask the BIOS whether or not to use native PCIe services
associated with PCIe ports (PME, hot-plug, AER). Use
them only if that is allowed by the BIOS.
native Use native PCIe services associated with PCIe ports
unconditionally.
compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
ports driver.
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
Format: {auto|force}[,nomsi]
auto Use native PCIe PME signaling if the BIOS allows the
kernel to control PCIe config registers of root ports.
force Use native PCIe PME signaling even if the BIOS refuses
to allow the kernel to control the relevant PCIe config
registers.
nomsi Do not use MSI for native PCIe PME signaling (this makes
all PCIe root ports use INTx for everything).
all PCIe root ports use INTx for all services).
pcmv= [HW,PCMCIA] BadgePAD 4

Просмотреть файл

@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
mutex semantics are sufficient for your code, then there are a couple
of advantages of mutexes:
- 'struct mutex' is smaller on most architectures: .e.g on x86,
- 'struct mutex' is smaller on most architectures: E.g. on x86,
'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
A smaller structure size means less RAM footprint, and better
CPU-cache utilization.
@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
int mutex_lock_interruptible_nested(struct mutex *lock,
unsigned int subclass);
int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);

Просмотреть файл

@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
current limit is controllable).
(C) 2008 Wolfson Microelectronics PLC.
Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Author: Liam Girdwood <lrg@slimlogic.co.uk>
Nomenclature

Просмотреть файл

@ -296,6 +296,7 @@ Conexant 5051
Conexant 5066
=============
laptop Basic Laptop config (default)
hp-laptop HP laptops, e g G60
dell-laptop Dell laptops
dell-vostro Dell Vostro
olpc-xo-1_5 OLPC XO 1.5

380
Documentation/workqueue.txt Normal file
Просмотреть файл

@ -0,0 +1,380 @@
Concurrency Managed Workqueue (cmwq)
September, 2010 Tejun Heo <tj@kernel.org>
Florian Mickler <florian@mickler.org>
CONTENTS
1. Introduction
2. Why cmwq?
3. The Design
4. Application Programming Interface (API)
5. Example Execution Scenarios
6. Guidelines
1. Introduction
There are many cases where an asynchronous process execution context
is needed and the workqueue (wq) API is the most commonly used
mechanism for such cases.
When such an asynchronous execution context is needed, a work item
describing which function to execute is put on a queue. An
independent thread serves as the asynchronous execution context. The
queue is called workqueue and the thread is called worker.
While there are work items on the workqueue the worker executes the
functions associated with the work items one after the other. When
there is no work item left on the workqueue the worker becomes idle.
When a new work item gets queued, the worker begins executing again.
2. Why cmwq?
In the original wq implementation, a multi threaded (MT) wq had one
worker thread per CPU and a single threaded (ST) wq had one worker
thread system-wide. A single MT wq needed to keep around the same
number of workers as the number of CPUs. The kernel grew a lot of MT
wq users over the years and with the number of CPU cores continuously
rising, some systems saturated the default 32k PID space just booting
up.
Although MT wq wasted a lot of resource, the level of concurrency
provided was unsatisfactory. The limitation was common to both ST and
MT wq albeit less severe on MT. Each wq maintained its own separate
worker pool. A MT wq could provide only one execution context per CPU
while a ST wq one for the whole system. Work items had to compete for
those very limited execution contexts leading to various problems
including proneness to deadlocks around the single execution context.
The tension between the provided level of concurrency and resource
usage also forced its users to make unnecessary tradeoffs like libata
choosing to use ST wq for polling PIOs and accepting an unnecessary
limitation that no two polling PIOs can progress at the same time. As
MT wq don't provide much better concurrency, users which require
higher level of concurrency, like async or fscache, had to implement
their own thread pool.
Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
focus on the following goals.
* Maintain compatibility with the original workqueue API.
* Use per-CPU unified worker pools shared by all wq to provide
flexible level of concurrency on demand without wasting a lot of
resource.
* Automatically regulate worker pool and level of concurrency so that
the API users don't need to worry about such details.
3. The Design
In order to ease the asynchronous execution of functions a new
abstraction, the work item, is introduced.
A work item is a simple struct that holds a pointer to the function
that is to be executed asynchronously. Whenever a driver or subsystem
wants a function to be executed asynchronously it has to set up a work
item pointing to that function and queue that work item on a
workqueue.
Special purpose threads, called worker threads, execute the functions
off of the queue, one after the other. If no work is queued, the
worker threads become idle. These worker threads are managed in so
called thread-pools.
The cmwq design differentiates between the user-facing workqueues that
subsystems and drivers queue work items on and the backend mechanism
which manages thread-pool and processes the queued work items.
The backend is called gcwq. There is one gcwq for each possible CPU
and one gcwq to serve work items queued on unbound workqueues.
Subsystems and drivers can create and queue work items through special
workqueue API functions as they see fit. They can influence some
aspects of the way the work items are executed by setting flags on the
workqueue they are putting the work item on. These flags include
things like CPU locality, reentrancy, concurrency limits and more. To
get a detailed overview refer to the API description of
alloc_workqueue() below.
When a work item is queued to a workqueue, the target gcwq is
determined according to the queue parameters and workqueue attributes
and appended on the shared worklist of the gcwq. For example, unless
specifically overridden, a work item of a bound workqueue will be
queued on the worklist of exactly that gcwq that is associated to the
CPU the issuer is running on.
For any worker pool implementation, managing the concurrency level
(how many execution contexts are active) is an important issue. cmwq
tries to keep the concurrency at a minimal but sufficient level.
Minimal to save resources and sufficient in that the system is used at
its full capacity.
Each gcwq bound to an actual CPU implements concurrency management by
hooking into the scheduler. The gcwq is notified whenever an active
worker wakes up or sleeps and keeps track of the number of the
currently runnable workers. Generally, work items are not expected to
hog a CPU and consume many cycles. That means maintaining just enough
concurrency to prevent work processing from stalling should be
optimal. As long as there are one or more runnable workers on the
CPU, the gcwq doesn't start execution of a new work, but, when the
last running worker goes to sleep, it immediately schedules a new
worker so that the CPU doesn't sit idle while there are pending work
items. This allows using a minimal number of workers without losing
execution bandwidth.
Keeping idle workers around doesn't cost other than the memory space
for kthreads, so cmwq holds onto idle ones for a while before killing
them.
For an unbound wq, the above concurrency management doesn't apply and
the gcwq for the pseudo unbound CPU tries to start executing all work
items as soon as possible. The responsibility of regulating
concurrency level is on the users. There is also a flag to mark a
bound wq to ignore the concurrency management. Please refer to the
API section for details.
Forward progress guarantee relies on that workers can be created when
more execution contexts are necessary, which in turn is guaranteed
through the use of rescue workers. All work items which might be used
on code paths that handle memory reclaim are required to be queued on
wq's that have a rescue-worker reserved for execution under memory
pressure. Else it is possible that the thread-pool deadlocks waiting
for execution contexts to free up.
4. Application Programming Interface (API)
alloc_workqueue() allocates a wq. The original create_*workqueue()
functions are deprecated and scheduled for removal. alloc_workqueue()
takes three arguments - @name, @flags and @max_active. @name is the
name of the wq and also used as the name of the rescuer thread if
there is one.
A wq no longer manages execution resources but serves as a domain for
forward progress guarantee, flush and work item attributes. @flags
and @max_active control how work items are assigned execution
resources, scheduled and executed.
@flags:
WQ_NON_REENTRANT
By default, a wq guarantees non-reentrance only on the same
CPU. A work item may not be executed concurrently on the same
CPU by multiple workers but is allowed to be executed
concurrently on multiple CPUs. This flag makes sure
non-reentrance is enforced across all CPUs. Work items queued
to a non-reentrant wq are guaranteed to be executed by at most
one worker system-wide at any given time.
WQ_UNBOUND
Work items queued to an unbound wq are served by a special
gcwq which hosts workers which are not bound to any specific
CPU. This makes the wq behave as a simple execution context
provider without concurrency management. The unbound gcwq
tries to start execution of work items as soon as possible.
Unbound wq sacrifices locality but is useful for the following
cases.
* Wide fluctuation in the concurrency level requirement is
expected and using bound wq may end up creating large number
of mostly unused workers across different CPUs as the issuer
hops through different CPUs.
* Long running CPU intensive workloads which can be better
managed by the system scheduler.
WQ_FREEZEABLE
A freezeable wq participates in the freeze phase of the system
suspend operations. Work items on the wq are drained and no
new work item starts execution until thawed.
WQ_RESCUER
All wq which might be used in the memory reclaim paths _MUST_
have this flag set. This reserves one worker exclusively for
the execution of this wq under memory pressure.
WQ_HIGHPRI
Work items of a highpri wq are queued at the head of the
worklist of the target gcwq and start execution regardless of
the current concurrency level. In other words, highpri work
items will always start execution as soon as execution
resource is available.
Ordering among highpri work items is preserved - a highpri
work item queued after another highpri work item will start
execution after the earlier highpri work item starts.
Although highpri work items are not held back by other
runnable work items, they still contribute to the concurrency
level. Highpri work items in runnable state will prevent
non-highpri work items from starting execution.
This flag is meaningless for unbound wq.
WQ_CPU_INTENSIVE
Work items of a CPU intensive wq do not contribute to the
concurrency level. In other words, runnable CPU intensive
work items will not prevent other work items from starting
execution. This is useful for bound work items which are
expected to hog CPU cycles so that their execution is
regulated by the system scheduler.
Although CPU intensive work items don't contribute to the
concurrency level, start of their executions is still
regulated by the concurrency management and runnable
non-CPU-intensive work items can delay execution of CPU
intensive work items.
This flag is meaningless for unbound wq.
WQ_HIGHPRI | WQ_CPU_INTENSIVE
This combination makes the wq avoid interaction with
concurrency management completely and behave as a simple
per-CPU execution context provider. Work items queued on a
highpri CPU-intensive wq start execution as soon as resources
are available and don't affect execution of other work items.
@max_active:
@max_active determines the maximum number of execution contexts per
CPU which can be assigned to the work items of a wq. For example,
with @max_active of 16, at most 16 work items of the wq can be
executing at the same time per CPU.
Currently, for a bound wq, the maximum limit for @max_active is 512
and the default value used when 0 is specified is 256. For an unbound
wq, the limit is higher of 512 and 4 * num_possible_cpus(). These
values are chosen sufficiently high such that they are not the
limiting factor while providing protection in runaway cases.
The number of active work items of a wq is usually regulated by the
users of the wq, more specifically, by how many work items the users
may queue at the same time. Unless there is a specific need for
throttling the number of active work items, specifying '0' is
recommended.
Some users depend on the strict execution ordering of ST wq. The
combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
behavior. Work items on such wq are always queued to the unbound gcwq
and only one work item can be active at any given time thus achieving
the same ordering property as ST wq.
5. Example Execution Scenarios
The following example execution scenarios try to illustrate how cmwq
behave under different configurations.
Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
again before finishing. w1 and w2 burn CPU for 5ms then sleep for
10ms.
Ignoring all other tasks, works and processing overhead, and assuming
simple FIFO scheduling, the following is one highly simplified version
of possible sequences of events with the original wq.
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 starts and burns CPU
25 w1 sleeps
35 w1 wakes up and finishes
35 w2 starts and burns CPU
40 w2 sleeps
50 w2 wakes up and finishes
And with cmwq with @max_active >= 3,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 starts and burns CPU
10 w1 sleeps
10 w2 starts and burns CPU
15 w2 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
25 w2 wakes up and finishes
If @max_active == 2,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 starts and burns CPU
10 w1 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
20 w2 starts and burns CPU
25 w2 sleeps
35 w2 wakes up and finishes
Now, let's assume w1 and w2 are queued to a different wq q1 which has
WQ_HIGHPRI set,
TIME IN MSECS EVENT
0 w1 and w2 start and burn CPU
5 w1 sleeps
10 w2 sleeps
10 w0 starts and burns CPU
15 w0 sleeps
15 w1 wakes up and finishes
20 w2 wakes up and finishes
25 w0 wakes up and burns CPU
30 w0 finishes
If q1 has WQ_CPU_INTENSIVE set,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 and w2 start and burn CPU
10 w1 sleeps
15 w2 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
25 w2 wakes up and finishes
6. Guidelines
* Do not forget to use WQ_RESCUER if a wq may process work items which
are used during memory reclaim. Each wq with WQ_RESCUER set has one
rescuer thread reserved for it. If there is dependency among
multiple work items used during memory reclaim, they should be
queued to separate wq each with WQ_RESCUER.
* Unless strict ordering is required, there is no need to use ST wq.
* Unless there is a specific need, using 0 for @max_active is
recommended. In most use cases, concurrency level usually stays
well under the default limit.
* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
flush and work item attributes. Work items which are not involved
in memory reclaim and don't need to be flushed as a part of a group
of work items, and don't require any special attribute, can use one
of the system wq. There is no difference in execution
characteristics between using a dedicated wq and a system wq.
* Unless work items are expected to consume a huge amount of CPU
cycles, using a bound wq is usually beneficial due to the increased
level of locality in wq operations and work item execution.

Просмотреть файл

@ -962,6 +962,13 @@ W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c6410/
ARM/S5P ARM ARCHITECTURES
M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
ARM/SHMOBILE ARM ARCHITECTURE
M: Paul Mundt <lethal@linux-sh.org>
M: Magnus Damm <magnus.damm@gmail.com>
@ -1135,7 +1142,7 @@ ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
M: Jie Yang <jie.yang@atheros.com>
L: atl1-devel@lists.sourceforge.net
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
@ -1220,7 +1227,7 @@ F: drivers/auxdisplay/
F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
M: Haavard Skinnemoen <hskinnemoen@atmel.com>
M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
W: http://www.atmel.com/products/AVR32/
W: http://avr32linux.org/
W: http://avrfreaks.net/
@ -1228,7 +1235,7 @@ S: Supported
F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
M: Haavard Skinnemoen <hskinnemoen@atmel.com>
M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
S: Supported
F: arch/avr32/mach-at32ap/
@ -1445,6 +1452,16 @@ S: Maintained
F: Documentation/video4linux/cafe_ccic
F: drivers/media/video/cafe_ccic*
CAIF NETWORK LAYER
M: Sjur Braendeland <sjur.brandeland@stericsson.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/caif/
F: drivers/net/caif/
F: include/linux/caif/
F: include/net/caif/
F: net/caif/
CALGARY x86-64 IOMMU
M: Muli Ben-Yehuda <muli@il.ibm.com>
M: "Jon D. Mason" <jdmason@kudzu.us>
@ -2189,6 +2206,12 @@ W: http://acpi4asus.sf.net
S: Maintained
F: drivers/platform/x86/eeepc-laptop.c
EFIFB FRAMEBUFFER DRIVER
L: linux-fbdev@vger.kernel.org
M: Peter Jones <pjones@redhat.com>
S: Maintained
F: drivers/video/efifb.c
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
@ -2201,6 +2224,12 @@ L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/ehca/
EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
M: Breno Leitao <leitao@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ehea/
EMBEDDED LINUX
M: Paul Gortmaker <paul.gortmaker@windriver.com>
M: Matt Mackall <mpm@selenic.com>
@ -2641,9 +2670,14 @@ S: Maintained
F: drivers/media/video/gspca/
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
S: Orphan
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
T: quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
F: drivers/hwmon/
F: include/linux/hwmon*.h
@ -2781,11 +2815,6 @@ S: Maintained
F: arch/x86/kernel/hpet.c
F: arch/x86/include/asm/hpet.h
HPET: ACPI
M: Bob Picco <bob.picco@hp.com>
S: Maintained
F: drivers/char/hpet.c
HPFS FILESYSTEM
M: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
@ -3398,7 +3427,7 @@ F: drivers/s390/kvm/
KEXEC
M: Eric Biederman <ebiederm@xmission.com>
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
W: http://kernel.org/pub/linux/utils/kernel/kexec/
L: kexec@lists.infradead.org
S: Maintained
F: include/linux/kexec.h
@ -3759,9 +3788,8 @@ W: http://www.syskonnect.com
S: Supported
MATROX FRAMEBUFFER DRIVER
M: Petr Vandrovec <vandrove@vc.cvut.cz>
L: linux-fbdev@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
@ -3885,10 +3913,8 @@ F: Documentation/serial/moxa-smartio
F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
M: Lennart Poettering <mzxreary@0pointer.de>
M: Lee, Chun-Yi <jlee@novell.com>
L: platform-driver-x86@vger.kernel.org
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
F: drivers/platform/x86/msi-laptop.c
@ -3905,8 +3931,10 @@ S: Supported
F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
S: Orphan
M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
F: drivers/mmc/
F: include/linux/mmc/
@ -3923,13 +3951,12 @@ F: Documentation/sound/oss/MultiSound
F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
S: Orphan
F: drivers/char/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <felipe.balbi@nokia.com>
M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/usb/usb.git
S: Maintained
@ -3949,8 +3976,8 @@ S: Maintained
F: drivers/net/natsemi.c
NCP FILESYSTEM
M: Petr Vandrovec <vandrove@vc.cvut.cz>
S: Maintained
M: Petr Vandrovec <petr@vandrovec.name>
S: Odd Fixes
F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
@ -4227,7 +4254,7 @@ S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
M: Felipe Balbi <felipe.balbi@nokia.com>
M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
@ -4604,7 +4631,7 @@ F: include/linux/preempt.h
PRISM54 WIRELESS DRIVER
M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
F: drivers/net/wireless/prism54/
@ -4805,6 +4832,7 @@ RCUTORTURE MODULE
M: Josh Triplett <josh@freedesktop.org>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Supported
T: git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
@ -4829,6 +4857,7 @@ M: Dipankar Sarma <dipankar@in.ibm.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/rclock/
S: Supported
T: git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
F: Documentation/RCU/
F: include/linux/rcu*
F: include/linux/srcu*
@ -4836,12 +4865,10 @@ F: kernel/rcu*
F: kernel/srcu*
X: kernel/rcutorture.c
REAL TIME CLOCK DRIVER
REAL TIME CLOCK DRIVER (LEGACY)
M: Paul Gortmaker <p_gortmaker@yahoo.com>
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
F: include/linux/rtc.h
F: drivers/char/rtc.c
REAL TIME CLOCK (RTC) SUBSYSTEM
M: Alessandro Zummo <a.zummo@towertech.it>
@ -5078,8 +5105,10 @@ S: Maintained
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
S: Orphan
M: Chris Ball <cjb@laptop.org>
L: linux-mmc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)

Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION = -rc3
EXTRAVERSION = -rc7
NAME = Sheep on Meth
# *DOCUMENTATION*

Просмотреть файл

@ -32,8 +32,9 @@ config HAVE_OPROFILE
config KPROBES
bool "Kprobes"
depends on KALLSYMS && MODULES
depends on MODULES
depends on HAVE_KPROBES
select KALLSYMS
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
@ -45,7 +46,6 @@ config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES
depends on !PREEMPT
select KALLSYMS_ALL
config HAVE_EFFICIENT_UNALIGNED_ACCESS
bool

Просмотреть файл

@ -17,7 +17,6 @@
# define L1_CACHE_SHIFT 5
#endif
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#endif

Просмотреть файл

@ -43,6 +43,8 @@ extern void smp_imb(void);
/* ??? Ought to use this in arch/alpha/kernel/signal.c too. */
#ifndef CONFIG_SMP
#include <linux/sched.h>
extern void __load_new_mm_context(struct mm_struct *);
static inline void
flush_icache_user_range(struct vm_area_struct *vma, struct page *page,

Просмотреть файл

@ -449,10 +449,13 @@
#define __NR_pwritev 491
#define __NR_rt_tgsigqueueinfo 492
#define __NR_perf_event_open 493
#define __NR_fanotify_init 494
#define __NR_fanotify_mark 495
#define __NR_prlimit64 496
#ifdef __KERNEL__
#define NR_SYSCALLS 494
#define NR_SYSCALLS 497
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
@ -463,6 +466,7 @@
#define __ARCH_WANT_SYS_OLD_GETRLIMIT
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/* "Conditional" syscalls. What we want is

Просмотреть файл

@ -73,8 +73,6 @@
ldq $20, HAE_REG($19); \
stq $21, HAE_CACHE($19); \
stq $21, 0($20); \
ldq $0, 0($sp); \
ldq $1, 8($sp); \
99:; \
ldq $19, 72($sp); \
ldq $20, 80($sp); \
@ -316,19 +314,24 @@ ret_from_sys_call:
cmovne $26, 0, $19 /* $19 = 0 => non-restartable */
ldq $0, SP_OFF($sp)
and $0, 8, $0
beq $0, restore_all
ret_from_reschedule:
beq $0, ret_to_kernel
ret_to_user:
/* Make sure need_resched and sigpending don't change between
sampling and the rti. */
lda $16, 7
call_pal PAL_swpipl
ldl $5, TI_FLAGS($8)
and $5, _TIF_WORK_MASK, $2
bne $5, work_pending
bne $2, work_pending
restore_all:
RESTORE_ALL
call_pal PAL_rti
ret_to_kernel:
lda $16, 7
call_pal PAL_swpipl
br restore_all
.align 3
$syscall_error:
/*
@ -363,7 +366,7 @@ $ret_success:
* $8: current.
* $19: The old syscall number, or zero if this is not a return
* from a syscall that errored and is possibly restartable.
* $20: Error indication.
* $20: The old a3 value
*/
.align 4
@ -392,12 +395,18 @@ $work_resched:
$work_notifysig:
mov $sp, $16
br $1, do_switch_stack
bsr $1, do_switch_stack
mov $sp, $17
mov $5, $18
mov $19, $9 /* save old syscall number */
mov $20, $10 /* save old a3 */
and $5, _TIF_SIGPENDING, $2
cmovne $2, 0, $9 /* we don't want double syscall restarts */
jsr $26, do_notify_resume
mov $9, $19
mov $10, $20
bsr $1, undo_switch_stack
br restore_all
br ret_to_user
.end work_pending
/*
@ -430,6 +439,7 @@ strace:
beq $1, 1f
ldq $27, 0($2)
1: jsr $26, ($27), sys_gettimeofday
ret_from_straced:
ldgp $gp, 0($26)
/* check return.. */
@ -650,7 +660,7 @@ kernel_thread:
/* We don't actually care for a3 success widgetry in the kernel.
Not for positive errno values. */
stq $0, 0($sp) /* $0 */
br restore_all
br ret_to_kernel
.end kernel_thread
/*
@ -757,11 +767,15 @@ sys_vfork:
.ent sys_sigreturn
sys_sigreturn:
.prologue 0
lda $9, ret_from_straced
cmpult $26, $9, $9
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_sigreturn
br $1, undo_switch_stack
bne $9, 1f
jsr $26, syscall_trace
1: br $1, undo_switch_stack
br ret_from_sys_call
.end sys_sigreturn
@ -770,46 +784,18 @@ sys_sigreturn:
.ent sys_rt_sigreturn
sys_rt_sigreturn:
.prologue 0
lda $9, ret_from_straced
cmpult $26, $9, $9
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_rt_sigreturn
br $1, undo_switch_stack
bne $9, 1f
jsr $26, syscall_trace
1: br $1, undo_switch_stack
br ret_from_sys_call
.end sys_rt_sigreturn
.align 4
.globl sys_sigsuspend
.ent sys_sigsuspend
sys_sigsuspend:
.prologue 0
mov $sp, $17
br $1, do_switch_stack
mov $sp, $18
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_sigsuspend
.align 4
.globl sys_rt_sigsuspend
.ent sys_rt_sigsuspend
sys_rt_sigsuspend:
.prologue 0
mov $sp, $18
br $1, do_switch_stack
mov $sp, $19
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_rt_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_rt_sigsuspend
.align 4
.globl sys_sethae
.ent sys_sethae
@ -928,15 +914,6 @@ sys_execve:
jmp $31, do_sys_execve
.end sys_execve
.align 4
.globl osf_sigprocmask
.ent osf_sigprocmask
osf_sigprocmask:
.prologue 0
mov $sp, $18
jmp $31, sys_osf_sigprocmask
.end osf_sigprocmask
.align 4
.globl alpha_ni_syscall
.ent alpha_ni_syscall

Просмотреть файл

@ -90,11 +90,13 @@ static int
ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn,
u64 c_stat, u64 c_sts, int print)
{
char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
"MEMORY", "BCACHE", "DCACHE",
"BCACHE PROBE", "BCACHE PROBE" };
char *streamname[] = { "D", "I" };
char *bitsname[] = { "SINGLE", "DOUBLE" };
static const char * const sourcename[] = {
"UNKNOWN", "UNKNOWN", "UNKNOWN",
"MEMORY", "BCACHE", "DCACHE",
"BCACHE PROBE", "BCACHE PROBE"
};
static const char * const streamname[] = { "D", "I" };
static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
int status = MCHK_DISPOSITION_REPORT;
int source = -1, stream = -1, bits = -1;

Просмотреть файл

@ -109,7 +109,7 @@ marvel_print_err_cyc(u64 err_cyc)
#define IO7__ERR_CYC__CYCLE__M (0x7)
printk("%s Packet In Error: %s\n"
"%s Error in %s, cycle %ld%s%s\n",
"%s Error in %s, cycle %lld%s%s\n",
err_print_prefix,
packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
err_print_prefix,
@ -313,7 +313,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
}
printk("%s Up Hose Garbage Symptom:\n"
"%s Source Port: %ld - Dest PID: %ld - OpCode: %s\n",
"%s Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
err_print_prefix,
err_print_prefix,
EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
@ -552,7 +552,7 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M (0xfff)
printk("%s Split Completion Error:\n"
"%s Source (Bus:Dev:Func): %ld:%ld:%ld\n",
"%s Source (Bus:Dev:Func): %lld:%lld:%lld\n",
err_print_prefix,
err_print_prefix,
EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
static void
marvel_print_pox_trans_sum(u64 trans_sum)
{
char *pcix_cmd[] = { "Interrupt Acknowledge",
"Special Cycle",
"I/O Read",
"I/O Write",
"Reserved",
"Reserved / Device ID Message",
"Memory Read",
"Memory Write",
"Reserved / Alias to Memory Read Block",
"Reserved / Alias to Memory Write Block",
"Configuration Read",
"Configuration Write",
"Memory Read Multiple / Split Completion",
"Dual Address Cycle",
"Memory Read Line / Memory Read Block",
"Memory Write and Invalidate / Memory Write Block"
static const char * const pcix_cmd[] = {
"Interrupt Acknowledge",
"Special Cycle",
"I/O Read",
"I/O Write",
"Reserved",
"Reserved / Device ID Message",
"Memory Read",
"Memory Write",
"Reserved / Alias to Memory Read Block",
"Reserved / Alias to Memory Write Block",
"Configuration Read",
"Configuration Write",
"Memory Read Multiple / Split Completion",
"Dual Address Cycle",
"Memory Read Line / Memory Read Block",
"Memory Write and Invalidate / Memory Write Block"
};
#define IO7__POX_TRANSUM__PCI_ADDR__S (0)

Просмотреть файл

@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
int status = MCHK_DISPOSITION_REPORT;
#ifdef CONFIG_VERBOSE_MCHECK
char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
static const char * const serror_src[] = {
"GPCI", "APCI", "AGP HP", "AGP LP"
};
static const char * const serror_cmd[] = {
"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
};
#endif /* CONFIG_VERBOSE_MCHECK */
#define TITAN__PCHIP_SERROR__LOST_UECC (1UL << 0)
@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
int status = MCHK_DISPOSITION_REPORT;
#ifdef CONFIG_VERBOSE_MCHECK
char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
"I/O Read", "I/O Write",
"Reserved", "Reserved",
"Memory Read", "Memory Write",
"Reserved", "Reserved",
"Configuration Read", "Configuration Write",
"Memory Read Multiple", "Dual Address Cycle",
"Memory Read Line","Memory Write and Invalidate"
static const char * const perror_cmd[] = {
"Interrupt Acknowledge", "Special Cycle",
"I/O Read", "I/O Write",
"Reserved", "Reserved",
"Memory Read", "Memory Write",
"Reserved", "Reserved",
"Configuration Read", "Configuration Write",
"Memory Read Multiple", "Dual Address Cycle",
"Memory Read Line", "Memory Write and Invalidate"
};
#endif /* CONFIG_VERBOSE_MCHECK */
@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
int cmd, len;
unsigned long addr;
char *agperror_cmd[] = { "Read (low-priority)", "Read (high-priority)",
"Write (low-priority)",
"Write (high-priority)",
"Reserved", "Reserved",
"Flush", "Fence"
static const char * const agperror_cmd[] = {
"Read (low-priority)", "Read (high-priority)",
"Write (low-priority)", "Write (high-priority)",
"Reserved", "Reserved",
"Flush", "Fence"
};
#endif /* CONFIG_VERBOSE_MCHECK */

Просмотреть файл

@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/syscalls.h>
#include <linux/unistd.h>
@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
{
struct mm_struct *mm;
lock_kernel();
mm = current->mm;
mm->end_code = bss_start + bss_len;
mm->start_brk = bss_start + bss_len;
@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
printk("set_program_attributes(%lx %lx %lx %lx)\n",
text_start, text_len, bss_start, bss_len);
#endif
unlock_kernel();
return 0;
}
@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
long error;
int __user *min_buf_size_ptr;
lock_kernel();
switch (code) {
case PL_SET:
if (get_user(error, &args->set.nbytes))
@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
error = -EOPNOTSUPP;
break;
};
unlock_kernel();
return error;
}
@ -594,7 +589,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
{
char *sysinfo_table[] = {
const char *sysinfo_table[] = {
utsname()->sysname,
utsname()->nodename,
utsname()->release,
@ -606,7 +601,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
"dummy", /* secure RPC domain */
};
unsigned long offset;
char *res;
const char *res;
long len, err = -EINVAL;
offset = command-1;

Просмотреть файл

@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
struct resource *res = (struct resource *)attr->private;
struct resource *res = attr->private;
enum pci_mmap_state mmap_type;
struct pci_bus_region bar;
int i;

Просмотреть файл

@ -241,20 +241,20 @@ static inline unsigned long alpha_read_pmc(int idx)
static int alpha_perf_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
long left = atomic64_read(&hwc->period_left);
long left = local64_read(&hwc->period_left);
long period = hwc->sample_period;
int ret = 0;
if (unlikely(left <= -period)) {
left = period;
atomic64_set(&hwc->period_left, left);
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
atomic64_set(&hwc->period_left, left);
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
@ -269,7 +269,7 @@ static int alpha_perf_event_set_period(struct perf_event *event,
if (left > (long)alpha_pmu->pmc_max_period[idx])
left = alpha_pmu->pmc_max_period[idx];
atomic64_set(&hwc->prev_count, (unsigned long)(-left));
local64_set(&hwc->prev_count, (unsigned long)(-left));
alpha_write_pmc(idx, (unsigned long)(-left));
@ -300,10 +300,10 @@ static unsigned long alpha_perf_event_update(struct perf_event *event,
long delta;
again:
prev_raw_count = atomic64_read(&hwc->prev_count);
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = alpha_read_pmc(idx);
if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
@ -316,8 +316,8 @@ again:
delta += alpha_pmu->pmc_max_period[idx] + 1;
}
atomic64_add(delta, &event->count);
atomic64_sub(delta, &hwc->period_left);
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return new_raw_count;
}
@ -636,7 +636,7 @@ static int __hw_perf_event_init(struct perf_event *event)
if (!hwc->sample_period) {
hwc->sample_period = alpha_pmu->pmc_max_period[0];
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
local64_set(&hwc->period_left, hwc->sample_period);
}
return 0;

Просмотреть файл

@ -356,7 +356,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
dest[27] = pt->r27;
dest[28] = pt->r28;
dest[29] = pt->gp;
dest[30] = rdusp();
dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
dest[31] = pt->pc;
/* Once upon a time this was the PS value. Which is stupid

Просмотреть файл

@ -156,9 +156,6 @@ extern void SMC669_Init(int);
/* es1888.c */
extern void es1888_init(void);
/* ns87312.c */
extern void ns87312_enable_ide(long ide_base);
/* ../lib/fpreg.c */
extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
extern unsigned long alpha_read_fp_reg (unsigned long reg);

Просмотреть файл

@ -41,46 +41,20 @@ static void do_signal(struct pt_regs *, struct switch_stack *,
/*
* The OSF/1 sigprocmask calling sequence is different from the
* C sigprocmask() sequence..
*
* how:
* 1 - SIG_BLOCK
* 2 - SIG_UNBLOCK
* 3 - SIG_SETMASK
*
* We change the range to -1 .. 1 in order to let gcc easily
* use the conditional move instructions.
*
* Note that we don't need to acquire the kernel lock for SMP
* operation, as all of this is local to this thread.
*/
SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
struct pt_regs *, regs)
SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
{
unsigned long oldmask = -EINVAL;
sigset_t oldmask;
sigset_t mask;
unsigned long res;
if ((unsigned long)how-1 <= 2) {
long sign = how-2; /* -1 .. 1 */
unsigned long block, unblock;
newmask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
oldmask = current->blocked.sig[0];
unblock = oldmask & ~newmask;
block = oldmask | newmask;
if (!sign)
block = unblock;
if (sign <= 0)
newmask = block;
if (_NSIG_WORDS > 1 && sign > 0)
sigemptyset(&current->blocked);
current->blocked.sig[0] = newmask;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
regs->r0 = 0; /* special no error return */
siginitset(&mask, newmask & _BLOCKABLE);
res = sigprocmask(how, &mask, &oldmask);
if (!res) {
force_successful_syscall_return();
res = oldmask.sig[0];
}
return oldmask;
return res;
}
SYSCALL_DEFINE3(osf_sigaction, int, sig,
@ -94,9 +68,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_flags, &act->sa_flags))
__get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
__get_user(mask, &act->sa_mask))
return -EFAULT;
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
new_ka.ka_restorer = NULL;
}
@ -106,9 +80,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_flags, &oact->sa_flags))
__put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
return -EFAULT;
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
return ret;
@ -144,8 +118,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
@ -154,41 +127,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
/* Indicate EINTR on return from any possible signal handler,
which will not come back through here, but via sigreturn. */
regs->r0 = EINTR;
regs->r19 = 1;
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return -ERESTARTNOHAND;
}
asmlinkage int
do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
struct pt_regs *regs, struct switch_stack *sw)
{
sigset_t set;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&set, uset, sizeof(set)))
return -EFAULT;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->saved_sigmask = current->blocked;
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
/* Indicate EINTR on return from any possible signal handler,
which will not come back through here, but via sigreturn. */
regs->r0 = EINTR;
regs->r19 = 1;
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
@ -239,6 +177,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
unsigned long usp;
long i, err = __get_user(regs->pc, &sc->sc_pc);
current_thread_info()->restart_block.fn = do_no_restart_syscall;
sw->r26 = (unsigned long) ret_from_sys_call;
err |= __get_user(regs->r0, sc->sc_regs+0);
@ -591,7 +531,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
current_thread_info()->restart_block.fn = do_no_restart_syscall;
regs->r0 = EINTR;
break;
}

Просмотреть файл

@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
srm_env_t *entry;
char *page;
entry = (srm_env_t *)m->private;
entry = m->private;
page = (char *)__get_free_page(GFP_USER);
if (!page)
return -ENOMEM;

Просмотреть файл

@ -33,7 +33,7 @@
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
#include "pc873xx.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned long cached_irq_mask = ~0UL;
@ -235,18 +235,31 @@ cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
return COMMON_TABLE_LOOKUP;
}
static inline void __init
cabriolet_enable_ide(void)
{
if (pc873xx_probe() == -1) {
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
} else {
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
pc873xx_get_model(), pc873xx_get_base());
pc873xx_enable_ide();
}
}
static inline void __init
cabriolet_init_pci(void)
{
common_init_pci();
ns87312_enable_ide(0x398);
cabriolet_enable_ide();
}
static inline void __init
cia_cab_init_pci(void)
{
cia_init_pci();
ns87312_enable_ide(0x398);
cabriolet_enable_ide();
}
/*

Просмотреть файл

@ -29,7 +29,7 @@
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
#include "pc873xx.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned long cached_irq_mask[2] = { -1, -1 };
@ -264,7 +264,14 @@ takara_init_pci(void)
alpha_mv.pci_map_irq = takara_map_irq_srm;
cia_init_pci();
ns87312_enable_ide(0x26e);
if (pc873xx_probe() == -1) {
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
} else {
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
pc873xx_get_model(), pc873xx_get_base());
pc873xx_enable_ide();
}
}

Просмотреть файл

@ -58,7 +58,7 @@ sys_call_table:
.quad sys_open /* 45 */
.quad alpha_ni_syscall
.quad sys_getxgid
.quad osf_sigprocmask
.quad sys_osf_sigprocmask
.quad alpha_ni_syscall
.quad alpha_ni_syscall /* 50 */
.quad sys_acct
@ -512,6 +512,9 @@ sys_call_table:
.quad sys_pwritev
.quad sys_rt_tgsigqueueinfo
.quad sys_perf_event_open
.quad sys_fanotify_init
.quad sys_fanotify_mark /* 495 */
.quad sys_prlimit64
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object

Просмотреть файл

@ -191,16 +191,16 @@ irqreturn_t timer_interrupt(int irq, void *dev)
write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
while (nticks--)
update_process_times(user_mode(get_irq_regs()));
#endif
if (test_perf_event_pending()) {
clear_perf_event_pending();
perf_event_do_pending();
}
#ifndef CONFIG_SMP
while (nticks--)
update_process_times(user_mode(get_irq_regs()));
#endif
return IRQ_HANDLED;
}

Просмотреть файл

@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
return;
}
lock_kernel();
printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
pc, va, opcode, reg);
do_exit(SIGSEGV);
@ -646,7 +644,6 @@ got_exception:
* Yikes! No one to forward the exception to.
* Since the registers are in a weird format, dump them ourselves.
*/
lock_kernel();
printk("%s(%d): unhandled unaligned exception\n",
current->comm, task_pid_nr(current));

Просмотреть файл

@ -271,7 +271,6 @@ config ARCH_AT91
bool "Atmel AT91"
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@ -1051,6 +1050,32 @@ config ARM_ERRATA_460075
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
config ARM_ERRATA_742230
bool "ARM errata: DMB operation may be faulty"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742230 Cortex-A9
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
between two write operations may not ensure the correct visibility
ordering of the two writes. This workaround sets a specific bit in
the diagnostic register of the Cortex-A9 which causes the DMB
instruction to behave as a DSB, ensuring the correct behaviour of
the two writes.
config ARM_ERRATA_742231
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 742231 Cortex-A9
(r2p0..r2p2) erratum. Under certain conditions, specific to the
Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
accessing some data located in the same cache line, may get corrupted
data due to bad handling of the address hazard when the line gets
replaced from one of the CPUs at the same time as another CPU is
accessing it. This workaround sets specific bits in the diagnostic
register of the Cortex-A9 which reduces the linefill issuing
capabilities of the processor.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0 && ARCH_OMAP4
@ -1576,96 +1601,6 @@ config AUTO_ZRELADDR
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
config ZRELADDR
hex "Physical address of the decompressed kernel image"
depends on !AUTO_ZRELADDR
default 0x00008000 if ARCH_BCMRING ||\
ARCH_CNS3XXX ||\
ARCH_DOVE ||\
ARCH_EBSA110 ||\
ARCH_FOOTBRIDGE ||\
ARCH_INTEGRATOR ||\
ARCH_IOP13XX ||\
ARCH_IOP33X ||\
ARCH_IXP2000 ||\
ARCH_IXP23XX ||\
ARCH_IXP4XX ||\
ARCH_KIRKWOOD ||\
ARCH_KS8695 ||\
ARCH_LOKI ||\
ARCH_MMP ||\
ARCH_MV78XX0 ||\
ARCH_NOMADIK ||\
ARCH_NUC93X ||\
ARCH_NS9XXX ||\
ARCH_ORION5X ||\
ARCH_SPEAR3XX ||\
ARCH_SPEAR6XX ||\
ARCH_U8500 ||\
ARCH_VERSATILE ||\
ARCH_W90X900
default 0x08008000 if ARCH_MX1 ||\
ARCH_SHARK
default 0x10008000 if ARCH_MSM ||\
ARCH_OMAP1 ||\
ARCH_RPC
default 0x20008000 if ARCH_S5P6440 ||\
ARCH_S5P6442 ||\
ARCH_S5PC100 ||\
ARCH_S5PV210
default 0x30008000 if ARCH_S3C2410 ||\
ARCH_S3C2400 ||\
ARCH_S3C2412 ||\
ARCH_S3C2416 ||\
ARCH_S3C2440 ||\
ARCH_S3C2443
default 0x40008000 if ARCH_STMP378X ||\
ARCH_STMP37XX ||\
ARCH_SH7372 ||\
ARCH_SH7377 ||\
ARCH_S5PV310
default 0x50008000 if ARCH_S3C64XX ||\
ARCH_SH7367
default 0x60008000 if ARCH_VEXPRESS
default 0x80008000 if ARCH_MX25 ||\
ARCH_MX3 ||\
ARCH_NETX ||\
ARCH_OMAP2PLUS ||\
ARCH_PNX4008
default 0x90008000 if ARCH_MX5 ||\
ARCH_MX91231
default 0xa0008000 if ARCH_IOP32X ||\
ARCH_PXA ||\
MACH_MX27
default 0xc0008000 if ARCH_LH7A40X ||\
MACH_MX21
default 0xf0008000 if ARCH_AAEC2000 ||\
ARCH_L7200
default 0xc0028000 if ARCH_CLPS711X
default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
default 0xc0208000 if ARCH_SA1100 && SA1111
default 0xc0008000 if ARCH_SA1100 && !SA1111
default 0x30108000 if ARCH_S3C2410 && PM_H1940
default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. ZRELADDR has to be specified when the
assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
selected.
endmenu
menu "CPU Power Management"

Просмотреть файл

@ -14,16 +14,18 @@
MKIMAGE := $(srctree)/scripts/mkuboot.sh
ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
include $(srctree)/$(MACHINE)/Makefile.boot
endif
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
ZRELADDR := $(zreladdr-y)
PARAMS_PHYS := $(params_phys-y)
INITRD_PHYS := $(initrd_phys-y)
export INITRD_PHYS PARAMS_PHYS
export ZRELADDR INITRD_PHYS PARAMS_PHYS
targets := Image zImage xipImage bootpImage uImage
@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
else
$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)

Просмотреть файл

@ -79,6 +79,10 @@ endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS := -Wa,-march=all
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
@ -112,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
$(obj)/font.c: $(FONTC)
$(call cmd,shipped)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@

Просмотреть файл

@ -177,7 +177,7 @@ not_angel:
and r4, pc, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =CONFIG_ZRELADDR
ldr r4, =zreladdr
#endif
subs r0, r0, r1 @ calculate the delta offset

Просмотреть файл

@ -263,6 +263,22 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
return 0;
}
int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
__func__, dma_addr, size);
return (dev->bus == &pci_bus_type) &&
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
return -EIO;
}
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;

Просмотреть файл

@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *);
* DMA access and 1 if the buffer needs to be bounced.
*
*/
#ifdef CONFIG_SA1111
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
#else
static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
size_t size)
{
return 0;
}
#endif
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.

Просмотреть файл

@ -17,7 +17,7 @@
* counter interrupts are regular interrupts and not an NMI. This
* means that when we receive the interrupt we can call
* perf_event_do_pending() that handles all of the work with
* interrupts enabled.
* interrupts disabled.
*/
static inline void
set_perf_event_pending(void)

Просмотреть файл

@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
#define __HAVE_PHYS_MEM_ACCESS_PROT
struct file;
extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot);
#else
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)

Просмотреть файл

@ -393,6 +393,9 @@
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
/*
* The following SWIs are ARM private.

Просмотреть файл

@ -376,6 +376,9 @@
CALL(sys_perf_event_open)
/* 365 */ CALL(sys_recvmmsg)
CALL(sys_accept4)
CALL(sys_fanotify_init)
CALL(sys_fanotify_mark)
CALL(sys_prlimit64)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

Просмотреть файл

@ -48,6 +48,8 @@ work_pending:
beq no_work_pending
mov r0, sp @ 'regs'
mov r2, why @ 'syscall'
tst r1, #_TIF_SIGPENDING @ delivering a signal?
movne why, #0 @ prevent further restarts
bl do_notify_resume
b ret_slow_syscall @ Check work again
@ -418,11 +420,13 @@ ENDPROC(sys_clone_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)

Просмотреть файл

@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc,
{
struct hw_perf_event fake_event = event->hw;
if (event->pmu && event->pmu != &pmu)
return 0;
if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
}
@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num,
/*
* Handle the pending perf events.
*
* Note: this call *must* be run with interrupts enabled. For
* platforms that can have the PMU interrupts raised as a PMI, this
* Note: this call *must* be run with interrupts disabled. For
* platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();
@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
/*
* Handle the pending perf events.
*
* Note: this call *must* be run with interrupts enabled. For
* platforms that can have the PMU interrupts raised as a PMI, this
* Note: this call *must* be run with interrupts disabled. For
* platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();

Просмотреть файл

@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
.pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb_clk = {
.name = "tcb_clk",
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
@ -192,6 +192,14 @@ static struct clk ohci_clk = {
.parent = &uhphs_clk,
};
/* One additional fake clock for second TC block */
static struct clk tcb1_clk = {
.name = "tcb1_clk",
.pmc_mask = 0,
.type = CLK_TYPE_PERIPHERAL,
.parent = &tcb0_clk,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
&spi1_clk,
&ssc0_clk,
&ssc1_clk,
&tcb_clk,
&tcb0_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
&mmc1_clk,
// irq0
&ohci_clk,
&tcb1_clk,
};
/*

Просмотреть файл

@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
[1] = {
.start = AT91SAM9G45_ID_DMA,
.end = AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PA21,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi0_device = {
@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
.sda_is_open_drain = 1,
.scl_pin = AT91_PIN_PB11,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.udelay = 5, /* ~100 kHz */
};
static struct platform_device at91sam9g45_twi1_device = {
@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has one clock and irq for all six TC channels */
at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb0_device);
at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb1_device);
}
#else

Просмотреть файл

@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct dm9000_plat_data dm9000_platdata = {
.flags = DM9000_PLATF_16BITONLY,
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device dm9000_device = {
@ -167,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
};
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
// .det_pin = ... not connected
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
};
/*
* NAND flash
*/
@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
at91_add_device_nand(&ek_nand_data);
}
/*
* SPI related devices
*/
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
/*
* ADS7846 Touchscreen
@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
#else /* CONFIG_SPI_ATMEL_* */
/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
/*
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
};
#endif /* CONFIG_SPI_ATMEL_* */
/*
* LCD Controller

Просмотреть файл

@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
int __init clk_register(struct clk *clk)
{
if (clk_is_peripheral(clk)) {
clk->parent = &mck;
if (!clk->parent)
clk->parent = &mck;
clk->mode = pmc_periph_mode;
list_add_tail(&clk->node, &clocks);
}

Просмотреть файл

@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

Просмотреть файл

@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

Просмотреть файл

@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00008000),
.length = SZ_16K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

Просмотреть файл

@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
.type = MT_MEMORY_NONCACHED,
},
};

Просмотреть файл

@ -13,8 +13,8 @@
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#endif

Просмотреть файл

@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void)
clkdev_add_table(clocks, ARRAY_SIZE(clocks));
return 0;
}
arch_initcall(ep93xx_clock_init);
postcore_initcall(ep93xx_clock_init);

Просмотреть файл

@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
}
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (mask >= SZ_64M - 1)
return 0;
return -EIO;
}
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);

Просмотреть файл

@ -26,6 +26,8 @@
#define PCIBIOS_MAX_MEM 0x4BFFFFFF
#endif
#define ARCH_HAS_DMA_SET_COHERENT_MASK
#define pcibios_assign_all_busses() 1
/* Register locations and bits */

Просмотреть файл

@ -38,7 +38,7 @@
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000

Просмотреть файл

@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 0 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;

Просмотреть файл

@ -9,6 +9,8 @@
#ifndef __ASM_MACH_SYSTEM_H
#define __ASM_MACH_SYSTEM_H
#include <mach/cputype.h>
static inline void arch_idle(void)
{
cpu_do_idle();
@ -16,6 +18,9 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
cpu_reset(0);
if (cpu_is_pxa168())
cpu_reset(0xffff0000);
else
cpu_reset(0);
}
#endif /* __ASM_MACH_SYSTEM_H */

Просмотреть файл

@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd_baseboard_init(void)
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))

Просмотреть файл

@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
if (!otg_mode_host)
mxc_register_device(&otg_udc_device, &otg_device_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
eukrea_mbimxsd_baseboard_init();
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
#endif
}

Просмотреть файл

@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
if (aad->sel)
fref = fref * 2 / 3;
fref = fref * 3 / 4;
return fref / aad->arm;
}
@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
unsigned long fref = get_rate_arm();
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
return get_rate_ahb(NULL) >> 1;
}
static unsigned long get_3_3_div(unsigned long in)
{
return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
}
static unsigned long get_rate_uart(struct clk *clk)
{
unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
unsigned long div = get_3_3_div(pdr4 >> 10);
unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
if (pdr3 & (1 << 14))
return get_rate_arm() / div;
@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
break;
}
return rate / get_3_3_div(div);
return rate / (div + 1);
}
static unsigned long get_rate_mshc(struct clk *clk)
@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
else
rate = get_rate_ppll();
return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
return rate / (((pdr2 >> 16) & 0x3f) + 1);
}
static unsigned long get_rate_otg(struct clk *clk)
@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk)
else
rate = get_rate_ppll();
return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
return rate / (((pdr4 >> 22) & 0x3f) + 1);
}
static unsigned long get_rate_ipg_per(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
unsigned long div1, div2;
unsigned long div;
if (pdr0 & (1 << 26)) {
div1 = (pdr4 >> 19) & 0x7;
div2 = (pdr4 >> 16) & 0x7;
return get_rate_arm() / ((div1 + 1) * (div2 + 1));
div = (pdr4 >> 16) & 0x3f;
return get_rate_arm() / (div + 1);
} else {
div1 = (pdr0 >> 12) & 0x7;
return get_rate_ahb(NULL) / div1;
div = (pdr0 >> 12) & 0x7;
return get_rate_ahb(NULL) / (div + 1);
}
}
static unsigned long get_rate_hsp(struct clk *clk)
{
unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
unsigned long fref = get_rate_mpll();
if (fref > 400 * 1000 * 1000) {
switch (hsp_podf) {
case 0:
return fref >> 2;
case 1:
return fref >> 3;
case 2:
return fref / 3;
}
} else {
switch (hsp_podf) {
case 0:
case 2:
return fref / 3;
case 1:
return fref / 6;
}
}
return 0;
}
static int clk_cgr_enable(struct clk *clk)
{
u32 reg;
@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL);
DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL);
DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL);
DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL);
@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
int __init mx35_clocks_init()
{
unsigned int ll = 0;
unsigned int cgr2 = 3 << 26, cgr3 = 0;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
cgr2 |= 3 << 16;
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@ -499,8 +520,20 @@ int __init mx35_clocks_init()
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
/*
* Check if we came up in internal boot mode. If yes, we need some
* extra clocks turned on, otherwise the MX35 boot ROM code will
* hang after a watchdog reset.
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
cgr2 |= 3 << 16 | 3 << 4;
cgr3 |= 3 << 2;
}
__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);

Просмотреть файл

@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd_baseboard_init(void)
void __init eukrea_mbimxsd35_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))

Просмотреть файл

@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
eukrea_mbimxsd_baseboard_init();
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
eukrea_mbimxsd35_baseboard_init();
#endif
}

Просмотреть файл

@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}

Просмотреть файл

@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
freqs.cpu = policy->cpu;
if (freq_debug)
pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
"(SDRAM %d Mhz)\n",
pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
(new_freq_mem / 2000) : (new_freq_mem / 1000));
@ -398,7 +397,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
return 0;
}
static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
static int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
unsigned int freq;

Просмотреть файл

@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
return 0;
}
static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
{
int ret = -EINVAL;

Просмотреть файл

@ -264,23 +264,35 @@
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
* == 0x3 for pxa300/pxa310/pxa320
*/
#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
#define __cpu_is_pxa2xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id <= 0x2; \
})
#else
#define __cpu_is_pxa2xx(id) (0)
#endif
#ifdef CONFIG_PXA3xx
#define __cpu_is_pxa3xx(id) \
({ \
unsigned int _id = (id) >> 13 & 0x7; \
_id == 0x3; \
})
#else
#define __cpu_is_pxa3xx(id) (0)
#endif
#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
})
#else
#define __cpu_is_pxa93x(id) (0)
#endif
#define cpu_is_pxa2xx() \
({ \
@ -309,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void);
#define PCIBIOS_MIN_IO 0
#define PCIBIOS_MIN_MEM 0
#define pcibios_assign_all_busses() 1
#define ARCH_HAS_DMA_SET_COHERENT_MASK
#endif
#endif /* _ASM_ARCH_HARDWARE_H */

Просмотреть файл

@ -6,6 +6,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <mach/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
/*

Просмотреть файл

@ -71,10 +71,10 @@
#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
#define GPIO51_CI_HSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
#define GPIO52_CI_VSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
/* KEYPAD */
#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)

Просмотреть файл

@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
},
};
static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
.use_pio = 1,
};
void __init palm27x_pmic_init(void)
{
i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
pxa27x_set_i2c_power_info(NULL);
pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
}
#endif

Просмотреть файл

@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static struct pxamci_platform_data vpac270_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_power = -1,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
.detect_delay_ms = 200,

Просмотреть файл

@ -18,10 +18,11 @@
#include <mach/map.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
#include <plat/devs.h>
static char *spi_src_clks[] = {
[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

Просмотреть файл

@ -30,73 +30,73 @@
#include <plat/devs.h>
#include <plat/regs-serial.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource real6410_dm9k_resource[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = S3C64XX_PA_XM0CSN1 + 4,
.end = S3C64XX_PA_XM0CSN1 + 5,
.flags = IORESOURCE_MEM
},
[2] = {
.start = S3C_EINT(7),
.end = S3C_EINT(7),
.flags = IORESOURCE_IRQ,
}
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = S3C64XX_PA_XM0CSN1 + 4,
.end = S3C64XX_PA_XM0CSN1 + 5,
.flags = IORESOURCE_MEM
},
[2] = {
.start = S3C_EINT(7),
.end = S3C_EINT(7),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
}
};
static struct dm9000_plat_data real6410_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device real6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
};
static struct platform_device *real6410_devices[] __initdata = {
@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}

Просмотреть файл

@ -280,6 +280,24 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<29),
}, {
.name = "fimc",
.id = 0,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 24),
}, {
.name = "fimc",
.id = 1,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 25),
}, {
.name = "fimc",
.id = 2,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 26),
}, {
.name = "otg",
.id = -1,
@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = {
.id = 1,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<8),
.ctrlbit = (1 << 10),
}, {
.name = "i2c",
.id = 2,

Просмотреть файл

@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
.length = SZ_1M,
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC2,

Просмотреть файл

@ -3,7 +3,7 @@
#
# Common objects
obj-y := timer.o console.o clock.o
obj-y := timer.o console.o clock.o pm_runtime.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o

Просмотреть файл

@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mfd/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -39,6 +40,7 @@
#include <linux/sh_clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_ocr_mask = MMC_VDD_165_195,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi1_resources[] = {
@ -558,7 +561,7 @@ static struct resource fsi_resources[] = {
static struct platform_device fsi_device = {
.name = "sh_fsi2",
.id = 0,
.id = -1,
.num_resources = ARRAY_SIZE(fsi_resources),
.resource = fsi_resources,
.dev = {
@ -650,7 +653,44 @@ static struct platform_device hdmi_device = {
},
};
static struct gpio_led ap4evb_leds[] = {
{
.name = "led4",
.gpio = GPIO_PORT185,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led2",
.gpio = GPIO_PORT186,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led3",
.gpio = GPIO_PORT187,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led1",
.gpio = GPIO_PORT188,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}
};
static struct gpio_led_platform_data ap4evb_leds_pdata = {
.num_leds = ARRAY_SIZE(ap4evb_leds),
.leds = ap4evb_leds,
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &ap4evb_leds_pdata,
},
};
static struct platform_device *ap4evb_devices[] __initdata = {
&leds_device,
&nor_flash_device,
&smc911x_device,
&sdhi0_device,
@ -840,20 +880,6 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_CS5A, NULL);
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable LED 1 - 4 */
gpio_request(GPIO_PORT185, NULL);
gpio_request(GPIO_PORT186, NULL);
gpio_request(GPIO_PORT187, NULL);
gpio_request(GPIO_PORT188, NULL);
gpio_direction_output(GPIO_PORT185, 1);
gpio_direction_output(GPIO_PORT186, 1);
gpio_direction_output(GPIO_PORT187, 1);
gpio_direction_output(GPIO_PORT188, 1);
gpio_export(GPIO_PORT185, 0);
gpio_export(GPIO_PORT186, 0);
gpio_export(GPIO_PORT187, 0);
gpio_export(GPIO_PORT188, 0);
/* enable Debug switch (S6) */
gpio_request(GPIO_PORT32, NULL);
gpio_request(GPIO_PORT33, NULL);

Просмотреть файл

@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = {
struct clk pllc2_clk = {
.ops = &pllc2_clk_ops,
.flags = CLK_ENABLE_ON_INIT,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
.parent_table = pllc2_parent,
@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
enum { MSTP001,
MSTP131, MSTP130,
MSTP129, MSTP128,
MSTP129, MSTP128, MSTP127, MSTP126,
MSTP118, MSTP117, MSTP116,
MSTP106, MSTP101, MSTP100,
MSTP223,
@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */

Просмотреть файл

@ -1,8 +1,10 @@
/*
* SH-Mobile Timer
* SH-Mobile Clock Framework
*
* Copyright (C) 2010 Magnus Damm
*
* Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.

Просмотреть файл

@ -0,0 +1,169 @@
/*
* arch/arm/mach-shmobile/pm_runtime.c
*
* Runtime PM support code for SuperH Mobile ARM
*
* Copyright (C) 2009-2010 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/bitmap.h>
#ifdef CONFIG_PM_RUNTIME
#define BIT_ONCE 0
#define BIT_ACTIVE 1
#define BIT_CLK_ENABLED 2
struct pm_runtime_data {
unsigned long flags;
struct clk *clk;
};
static void __devres_release(struct device *dev, void *res)
{
struct pm_runtime_data *prd = res;
dev_dbg(dev, "__devres_release()\n");
if (test_bit(BIT_CLK_ENABLED, &prd->flags))
clk_disable(prd->clk);
if (test_bit(BIT_ACTIVE, &prd->flags))
clk_put(prd->clk);
}
static struct pm_runtime_data *__to_prd(struct device *dev)
{
return devres_find(dev, __devres_release, NULL, NULL);
}
static void platform_pm_runtime_init(struct device *dev,
struct pm_runtime_data *prd)
{
if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
prd->clk = clk_get(dev, NULL);
if (!IS_ERR(prd->clk)) {
set_bit(BIT_ACTIVE, &prd->flags);
dev_info(dev, "clocks managed by runtime pm\n");
}
}
}
static void platform_pm_runtime_bug(struct device *dev,
struct pm_runtime_data *prd)
{
if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
dev_err(dev, "runtime pm suspend before resume\n");
}
int platform_pm_runtime_suspend(struct device *dev)
{
struct pm_runtime_data *prd = __to_prd(dev);
dev_dbg(dev, "platform_pm_runtime_suspend()\n");
platform_pm_runtime_bug(dev, prd);
if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
clk_disable(prd->clk);
clear_bit(BIT_CLK_ENABLED, &prd->flags);
}
return 0;
}
int platform_pm_runtime_resume(struct device *dev)
{
struct pm_runtime_data *prd = __to_prd(dev);
dev_dbg(dev, "platform_pm_runtime_resume()\n");
platform_pm_runtime_init(dev, prd);
if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
clk_enable(prd->clk);
set_bit(BIT_CLK_ENABLED, &prd->flags);
}
return 0;
}
int platform_pm_runtime_idle(struct device *dev)
{
/* suspend synchronously to disable clocks immediately */
return pm_runtime_suspend(dev);
}
static int platform_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct pm_runtime_data *prd;
dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
if (action == BUS_NOTIFY_BIND_DRIVER) {
prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
if (prd)
devres_add(dev, prd);
else
dev_err(dev, "unable to alloc memory for runtime pm\n");
}
return 0;
}
#else /* CONFIG_PM_RUNTIME */
static int platform_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct clk *clk;
dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
switch (action) {
case BUS_NOTIFY_BIND_DRIVER:
clk = clk_get(dev, NULL);
if (!IS_ERR(clk)) {
clk_enable(clk);
clk_put(clk);
dev_info(dev, "runtime pm disabled, clock forced on\n");
}
break;
case BUS_NOTIFY_UNBOUND_DRIVER:
clk = clk_get(dev, NULL);
if (!IS_ERR(clk)) {
clk_disable(clk);
clk_put(clk);
dev_info(dev, "runtime pm disabled, clock forced off\n");
}
break;
}
return 0;
}
#endif /* CONFIG_PM_RUNTIME */
static struct notifier_block platform_bus_notifier = {
.notifier_call = platform_bus_notify
};
static int __init sh_pm_runtime_init(void)
{
bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);

Просмотреть файл

@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
extern int gpio_get_value(unsigned gpio);
extern void gpio_set_value(unsigned gpio, int value);
#define gpio_get_value_cansleep gpio_get_value
#define gpio_set_value_cansleep gpio_set_value
/* wrappers to sleep-enable the previous two functions */
static inline unsigned gpio_to_irq(unsigned gpio)
{

Просмотреть файл

@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
int i;
#ifdef CONFIG_CACHE_L2X0
l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));

Просмотреть файл

@ -398,7 +398,7 @@ config CPU_V6
# ARMv6k
config CPU_32v6K
bool "Support ARM V6K processor extensions" if !SMP
depends on CPU_V6
depends on CPU_V6 || CPU_V7
default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
help
Say Y here if your ARMv6 processor supports the 'K' extension.

Просмотреть файл

@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
else {
/*
* We're about to disable the alignment trap and return to
* user space. But if an interrupt occurs before actually
* reaching user space, then the IRQ vector entry code will
* notice that we were still in kernel space and therefore
* the alignment trap won't be re-enabled in that case as it
* is presumed to be always on from kernel space.
* Let's prevent that race by disabling interrupts here (they
* are disabled on the way back to user space anyway in
* entry-common.S) and disable the alignment trap only if
* there is no work pending for this thread.
*/
raw_local_irq_disable();
if (!(current_thread_info()->flags & _TIF_WORK_MASK))
set_cr(cr_no_alignment);
}
return 0;
}

Просмотреть файл

@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
}
} while (size -= PAGE_SIZE);
dsb();
return (void *)c->vm_start;
}
return NULL;

Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/sort.h>
#include <linux/fs.h>
#include <asm/cputype.h>
#include <asm/sections.h>
@ -246,6 +247,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_USER,
},
[MT_MEMORY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -254,6 +258,9 @@ static struct mem_type mem_types[] = {
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
@ -411,9 +418,12 @@ static void __init build_mem_type_table(void)
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
if (arch_is_coherent() && cpu_is_xsc3())
if (arch_is_coherent() && cpu_is_xsc3()) {
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
}
/*
* ARMv6 and above have extended page tables.
*/
@ -438,7 +448,9 @@ static void __init build_mem_type_table(void)
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
#endif
}
@ -475,6 +487,8 @@ static void __init build_mem_type_table(void)
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
switch (cp->pmd) {
@ -498,6 +512,19 @@ static void __init build_mem_type_table(void)
}
}
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (!pfn_valid(pfn))
return pgprot_noncached(vma_prot);
else if (file->f_flags & O_SYNC)
return pgprot_writecombine(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
#endif
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
static void __init *early_alloc(unsigned long sz)

Просмотреть файл

@ -186,13 +186,14 @@ cpu_v7_name:
* It is assumed that:
* - cache type register is implemented
*/
__v7_setup:
__v7_ca9mp_setup:
#ifdef CONFIG_SMP
mrc p15, 0, r0, c1, c0, 1
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
@ -201,11 +202,16 @@ __v7_setup:
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
and r10, r0, #0xff000000 @ ARM?
teq r10, #0x41000000
bne 2f
bne 3f
and r5, r0, #0x00f00000 @ variant
and r6, r0, #0x0000000f @ revision
orr r0, r6, r5, lsr #20-4 @ combine variant and revision
orr r6, r6, r5, lsr #20-4 @ combine variant and revision
ubfx r0, r0, #4, #12 @ primary part number
/* Cortex-A8 Errata */
ldr r10, =0x00000c08 @ Cortex-A8 primary part number
teq r0, r10
bne 2f
#ifdef CONFIG_ARM_ERRATA_430973
teq r5, #0x00100000 @ only present in r1p*
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
@ -213,21 +219,42 @@ __v7_setup:
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
teq r0, #0x20 @ only present in r2p0
teq r6, #0x20 @ only present in r2p0
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
tsteq r10, #1 << 22
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
b 3f
2: mov r10, #0
/* Cortex-A9 Errata */
2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number
teq r0, r10
bne 3f
#ifdef CONFIG_ARM_ERRATA_742230
cmp r6, #0x22 @ only present up to r2p2
mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register
orrle r10, r10, #1 << 4 @ set bit #4
mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_742231
teq r6, #0x20 @ present in r2p0
teqne r6, #0x21 @ present in r2p1
teqne r6, #0x22 @ present in r2p2
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 12 @ set bit #12
orreq r10, r10, #1 << 22 @ set bit #22
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
3: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
@ -323,6 +350,29 @@ cpu_elf_name:
.section ".proc.info.init", #alloc, #execinstr
.type __v7_ca9mp_proc_info, #object
__v7_ca9mp_proc_info:
.long 0x410fc090 @ Required ID value
.long 0xff0ffff0 @ Mask for ID
.long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ | \
PMD_FLAGS
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
/*
* Match any ARMv7 processor core.
*/

Просмотреть файл

@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event)
if (IS_ERR(pevent)) {
ret = PTR_ERR(pevent);
} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
perf_event_release_kernel(pevent);
pr_warning("oprofile: failed to enable event %d "
"on CPU %d\n", event, cpu);
ret = -EBUSY;
@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
ret = init_driverfs();
if (ret) {
kfree(counter_config);
counter_config = NULL;
return ret;
}
@ -402,7 +404,6 @@ void oprofile_arch_exit(void)
struct perf_event *event;
if (*perf_events) {
exit_driverfs();
for_each_possible_cpu(cpu) {
for (id = 0; id < perf_num_counters; ++id) {
event = perf_events[cpu][id];
@ -413,8 +414,10 @@ void oprofile_arch_exit(void)
}
}
if (counter_config)
if (counter_config) {
kfree(counter_config);
exit_driverfs();
}
}
#else
int __init oprofile_arch_init(struct oprofile_operations *ops)

Просмотреть файл

@ -43,6 +43,7 @@ config ARCH_MXC91231
config ARCH_MX5
bool "MX5-based"
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
This enables support for systems based on the Freescale i.MX51 family

Просмотреть файл

@ -37,9 +37,9 @@
* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
*/
extern void eukrea_mbimx25_baseboard_init(void);
extern void eukrea_mbimxsd25_baseboard_init(void);
extern void eukrea_mbimx27_baseboard_init(void);
extern void eukrea_mbimx35_baseboard_init(void);
extern void eukrea_mbimxsd35_baseboard_init(void);
extern void eukrea_mbimx51_baseboard_init(void);
#endif

Просмотреть файл

@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
return -EAGAIN;
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
__raw_writel(v, TZIC_WAKEUP0(i));
v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
wakeup_intr[i];
__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
return 0;

Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/arch/arm/mach-nomadik/timer.c
* linux/arch/arm/plat-nomadik/timer.c
*
* Copyright (C) 2008 STMicroelectronics
* Copyright (C) 2010 Alessandro Rubini
@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
cr = readl(mtu_base + MTU_CR(1));
writel(0, mtu_base + MTU_LR(1));
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
writel(0x2, mtu_base + MTU_IMSC);
writel(1 << 1, mtu_base + MTU_IMSC);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
struct clk *clk1;
u32 cr;
u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
clk1 = clk_get_sys("mtu1", NULL);
BUG_ON(IS_ERR(clk1));
clk_enable(clk0);
clk_enable(clk1);
/*
* Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
* use a divide-by-16 counter if it's more than 16MHz
* Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
* for ux500.
* Use a divide-by-16 counter if the tick rate is more than 32MHz.
* At 32 MHz, the timer (with 32 bit counter) can be programmed
* to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
* with 16 gives too low timer resolution.
*/
cr = MTU_CRn_32BITS;;
rate = clk_get_rate(clk0);
if (rate > 16 << 20) {
if (rate > 32000000) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
pr_err("timer: failed to initialize clock source %s\n",
nmdk_clksrc.name);
/* Timer 1 is used for events, fix according to rate */
cr = MTU_CRn_32BITS;
rate = clk_get_rate(clk1);
if (rate > 16 << 20) {
rate /= 16;
cr |= MTU_CRn_PRESCALE_16;
} else {
cr |= MTU_CRn_PRESCALE_1;
}
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */

Просмотреть файл

@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
default y if LEDS
default y if LEDS_CLASS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"

Просмотреть файл

@ -156,7 +156,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
/* Writing zero to RSYNC_ERR clears the IRQ */
MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
} else {
complete(&mcbsp_rx->tx_irq_completion);
complete(&mcbsp_rx->rx_irq_completion);
}
return IRQ_HANDLED;

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше