ARM: 5955/1: ep93xx: move timer defines into core.c and document
The timer defines are only used in core.c. Move them so they will not be globaly exposed. While here, add additional defines to document the magic numbers used in the registers. Also, add some comments for clarification. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Родитель
d056ab7855
Коммит
1587a373f0
|
@ -84,13 +84,40 @@ void __init ep93xx_map_io(void)
|
|||
* to use this timer for something else. We also use timer 4 for keeping
|
||||
* track of lost jiffies.
|
||||
*/
|
||||
static unsigned int last_jiffy_time;
|
||||
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
|
||||
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
|
||||
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
|
||||
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
|
||||
#define EP93XX_TIMER123_CONTROL_ENABLE (1 << 7)
|
||||
#define EP93XX_TIMER123_CONTROL_MODE (1 << 6)
|
||||
#define EP93XX_TIMER123_CONTROL_CLKSEL (1 << 3)
|
||||
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
|
||||
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
|
||||
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
|
||||
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
|
||||
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
|
||||
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
|
||||
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
|
||||
#define EP93XX_TIMER4_VALUE_HIGH_ENABLE (1 << 8)
|
||||
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
|
||||
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
|
||||
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
|
||||
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
|
||||
|
||||
#define EP93XX_TIMER123_CLOCK 508469
|
||||
#define EP93XX_TIMER4_CLOCK 983040
|
||||
|
||||
#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
|
||||
#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
|
||||
|
||||
static unsigned int last_jiffy_time;
|
||||
|
||||
static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
/* Writing any value clears the timer interrupt */
|
||||
__raw_writel(1, EP93XX_TIMER1_CLEAR);
|
||||
|
||||
/* Recover lost jiffies */
|
||||
while ((signed long)
|
||||
(__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time)
|
||||
>= TIMER4_TICKS_PER_JIFFY) {
|
||||
|
@ -109,13 +136,18 @@ static struct irqaction ep93xx_timer_irq = {
|
|||
|
||||
static void __init ep93xx_timer_init(void)
|
||||
{
|
||||
u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
|
||||
EP93XX_TIMER123_CONTROL_CLKSEL;
|
||||
|
||||
/* Enable periodic HZ timer. */
|
||||
__raw_writel(0x48, EP93XX_TIMER1_CONTROL);
|
||||
__raw_writel((508469 / HZ) - 1, EP93XX_TIMER1_LOAD);
|
||||
__raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
|
||||
__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
|
||||
__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
|
||||
__raw_writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE,
|
||||
EP93XX_TIMER1_CONTROL);
|
||||
|
||||
/* Enable lost jiffy timer. */
|
||||
__raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
|
||||
__raw_writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
|
||||
EP93XX_TIMER4_VALUE_HIGH);
|
||||
|
||||
setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
|
||||
}
|
||||
|
|
|
@ -92,21 +92,6 @@
|
|||
|
||||
/* APB peripherals */
|
||||
#define EP93XX_TIMER_BASE EP93XX_APB_IOMEM(0x00010000)
|
||||
#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
|
||||
#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
|
||||
#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
|
||||
#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
|
||||
#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
|
||||
#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
|
||||
#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
|
||||
#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
|
||||
#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
|
||||
#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
|
||||
#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
|
||||
#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
|
||||
#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
|
||||
#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
|
||||
#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
|
||||
|
||||
#define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
|
||||
|
||||
|
|
Загрузка…
Ссылка в новой задаче