From 15de8c6efd0effef3a5226bd5ab7f101c9f4948f Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 19 Mar 2019 15:53:58 +0100 Subject: [PATCH] mtd: rawnand: ingenic: Separate top-level and SoC specific code The ingenic-nand driver uses an API provided by the jz4780-bch driver. This makes it difficult to support other SoCs in the jz4780-bch driver. To work around this, we separate the API functions from the SoC-specific code, so that these API functions are SoC-agnostic. Signed-off-by: Paul Cercueil Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/ingenic/Kconfig | 17 ++ drivers/mtd/nand/raw/ingenic/Makefile | 5 +- drivers/mtd/nand/raw/ingenic/ingenic_ecc.c | 156 ++++++++++++++++++ drivers/mtd/nand/raw/ingenic/ingenic_ecc.h | 83 ++++++++++ drivers/mtd/nand/raw/ingenic/ingenic_nand.c | 40 ++--- drivers/mtd/nand/raw/ingenic/jz4780_bch.c | 170 ++++---------------- drivers/mtd/nand/raw/ingenic/jz4780_bch.h | 40 ----- 7 files changed, 309 insertions(+), 202 deletions(-) create mode 100644 drivers/mtd/nand/raw/ingenic/ingenic_ecc.c create mode 100644 drivers/mtd/nand/raw/ingenic/ingenic_ecc.h delete mode 100644 drivers/mtd/nand/raw/ingenic/jz4780_bch.h diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig index 67806c87b2c4..4bf7d7af3b0a 100644 --- a/drivers/mtd/nand/raw/ingenic/Kconfig +++ b/drivers/mtd/nand/raw/ingenic/Kconfig @@ -11,3 +11,20 @@ config MTD_NAND_JZ4780 help Enables support for NAND Flash connected to the NEMC on JZ4780 SoC based boards, using the BCH controller for hardware error correction. + +if MTD_NAND_JZ4780 + +config MTD_NAND_INGENIC_ECC + tristate + +config MTD_NAND_JZ4780_BCH + tristate "Hardware BCH support for JZ4780 SoC" + select MTD_NAND_INGENIC_ECC + help + Enable this driver to support the BCH error-correction hardware + present on the JZ4780 SoC from Ingenic. + + This driver can also be built as a module. If so, the module + will be called jz4780-bch. + +endif # MTD_NAND_JZ4780 diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile index af2d5de21f60..f3c3c0f230b0 100644 --- a/drivers/mtd/nand/raw/ingenic/Makefile +++ b/drivers/mtd/nand/raw/ingenic/Makefile @@ -1,2 +1,5 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o -obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o jz4780_bch.o +obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o + +obj-$(CONFIG_MTD_NAND_INGENIC_ECC) += ingenic_ecc.o +obj-$(CONFIG_MTD_NAND_JZ4780_BCH) += jz4780_bch.o diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c new file mode 100644 index 000000000000..2aa71595a9e8 --- /dev/null +++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * JZ47xx ECC common code + * + * Copyright (c) 2015 Imagination Technologies + * Author: Alex Smith + */ + +#include +#include +#include +#include +#include + +#include "ingenic_ecc.h" + +/** + * ingenic_ecc_calculate() - calculate ECC for a data buffer + * @ecc: ECC device. + * @params: ECC parameters. + * @buf: input buffer with raw data. + * @ecc_code: output buffer with ECC. + * + * Return: 0 on success, -ETIMEDOUT if timed out while waiting for ECC + * controller. + */ +int ingenic_ecc_calculate(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code) +{ + return ecc->ops->calculate(ecc, params, buf, ecc_code); +} +EXPORT_SYMBOL(ingenic_ecc_calculate); + +/** + * ingenic_ecc_correct() - detect and correct bit errors + * @ecc: ECC device. + * @params: ECC parameters. + * @buf: raw data read from the chip. + * @ecc_code: ECC read from the chip. + * + * Given the raw data and the ECC read from the NAND device, detects and + * corrects errors in the data. + * + * Return: the number of bit errors corrected, -EBADMSG if there are too many + * errors to correct or -ETIMEDOUT if we timed out waiting for the controller. + */ +int ingenic_ecc_correct(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + u8 *buf, u8 *ecc_code) +{ + return ecc->ops->correct(ecc, params, buf, ecc_code); +} +EXPORT_SYMBOL(ingenic_ecc_correct); + +/** + * ingenic_ecc_get() - get the ECC controller device + * @np: ECC device tree node. + * + * Gets the ECC controller device from the specified device tree node. The + * device must be released with ingenic_ecc_release() when it is no longer being + * used. + * + * Return: a pointer to ingenic_ecc, errors are encoded into the pointer. + * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet. + */ +static struct ingenic_ecc *ingenic_ecc_get(struct device_node *np) +{ + struct platform_device *pdev; + struct ingenic_ecc *ecc; + + pdev = of_find_device_by_node(np); + if (!pdev || !platform_get_drvdata(pdev)) + return ERR_PTR(-EPROBE_DEFER); + + get_device(&pdev->dev); + + ecc = platform_get_drvdata(pdev); + clk_prepare_enable(ecc->clk); + + return ecc; +} + +/** + * of_ingenic_ecc_get() - get the ECC controller from a DT node + * @of_node: the node that contains a bch-controller property. + * + * Get the bch-controller property from the given device tree + * node and pass it to ingenic_ecc_get to do the work. + * + * Return: a pointer to ingenic_ecc, errors are encoded into the pointer. + * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet. + */ +struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *of_node) +{ + struct ingenic_ecc *ecc = NULL; + struct device_node *np; + + np = of_parse_phandle(of_node, "ingenic,bch-controller", 0); + + if (np) { + ecc = ingenic_ecc_get(np); + of_node_put(np); + } + return ecc; +} +EXPORT_SYMBOL(of_ingenic_ecc_get); + +/** + * ingenic_ecc_release() - release the ECC controller device + * @ecc: ECC device. + */ +void ingenic_ecc_release(struct ingenic_ecc *ecc) +{ + clk_disable_unprepare(ecc->clk); + put_device(ecc->dev); +} +EXPORT_SYMBOL(ingenic_ecc_release); + +int ingenic_ecc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ingenic_ecc *ecc; + struct resource *res; + + ecc = devm_kzalloc(dev, sizeof(*ecc), GFP_KERNEL); + if (!ecc) + return -ENOMEM; + + ecc->ops = device_get_match_data(dev); + if (!ecc->ops) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ecc->base = devm_ioremap_resource(dev, res); + if (IS_ERR(ecc->base)) + return PTR_ERR(ecc->base); + + ecc->ops->disable(ecc); + + ecc->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ecc->clk)) { + dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(ecc->clk)); + return PTR_ERR(ecc->clk); + } + + mutex_init(&ecc->lock); + + ecc->dev = dev; + platform_set_drvdata(pdev, ecc); + + return 0; +} +EXPORT_SYMBOL(ingenic_ecc_probe); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h new file mode 100644 index 000000000000..2cda439b5e11 --- /dev/null +++ b/drivers/mtd/nand/raw/ingenic/ingenic_ecc.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ +#define __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ + +#include +#include +#include +#include +#include + +struct clk; +struct device; +struct ingenic_ecc; +struct platform_device; + +/** + * struct ingenic_ecc_params - ECC parameters + * @size: data bytes per ECC step. + * @bytes: ECC bytes per step. + * @strength: number of correctable bits per ECC step. + */ +struct ingenic_ecc_params { + int size; + int bytes; + int strength; +}; + +#if IS_ENABLED(CONFIG_MTD_NAND_INGENIC_ECC) +int ingenic_ecc_calculate(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code); +int ingenic_ecc_correct(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, u8 *buf, + u8 *ecc_code); + +void ingenic_ecc_release(struct ingenic_ecc *ecc); +struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np); +#else /* CONFIG_MTD_NAND_INGENIC_ECC */ +int ingenic_ecc_calculate(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code) +{ + return -ENODEV; +} + +int ingenic_ecc_correct(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, u8 *buf, + u8 *ecc_code) +{ + return -ENODEV; +} + +void ingenic_ecc_release(struct ingenic_ecc *ecc) +{ +} + +struct ingenic_ecc *of_ingenic_ecc_get(struct device_node *np) +{ + return ERR_PTR(-ENODEV); +} +#endif /* CONFIG_MTD_NAND_INGENIC_ECC */ + +struct ingenic_ecc_ops { + void (*disable)(struct ingenic_ecc *ecc); + int (*calculate)(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code); + int (*correct)(struct ingenic_ecc *ecc, + struct ingenic_ecc_params *params, + u8 *buf, u8 *ecc_code); +}; + +struct ingenic_ecc { + struct device *dev; + const struct ingenic_ecc_ops *ops; + void __iomem *base; + struct clk *clk; + struct mutex lock; +}; + +int ingenic_ecc_probe(struct platform_device *pdev); + +#endif /* __DRIVERS_MTD_NAND_INGENIC_ECC_INTERNAL_H__ */ diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c index 8c73f7c5be9a..a5f2f21c5198 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand.c @@ -22,7 +22,7 @@ #include -#include "jz4780_bch.h" +#include "ingenic_ecc.h" #define DRV_NAME "ingenic-nand" @@ -40,7 +40,7 @@ struct ingenic_nand_cs { struct ingenic_nfc { struct device *dev; - struct jz4780_bch *bch; + struct ingenic_ecc *ecc; struct nand_controller controller; unsigned int num_banks; struct list_head chips; @@ -124,11 +124,11 @@ static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat, { struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip)); struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller); - struct jz4780_bch_params params; + struct ingenic_ecc_params params; /* - * Don't need to generate the ECC when reading, BCH does it for us as - * part of decoding/correction. + * Don't need to generate the ECC when reading, the ECC engine does it + * for us as part of decoding/correction. */ if (nand->reading) return 0; @@ -137,7 +137,7 @@ static int ingenic_nand_ecc_calculate(struct nand_chip *chip, const u8 *dat, params.bytes = nand->chip.ecc.bytes; params.strength = nand->chip.ecc.strength; - return jz4780_bch_calculate(nfc->bch, ¶ms, dat, ecc_code); + return ingenic_ecc_calculate(nfc->ecc, ¶ms, dat, ecc_code); } static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat, @@ -145,13 +145,13 @@ static int ingenic_nand_ecc_correct(struct nand_chip *chip, u8 *dat, { struct ingenic_nand *nand = to_ingenic_nand(nand_to_mtd(chip)); struct ingenic_nfc *nfc = to_ingenic_nfc(nand->chip.controller); - struct jz4780_bch_params params; + struct ingenic_ecc_params params; params.size = nand->chip.ecc.size; params.bytes = nand->chip.ecc.bytes; params.strength = nand->chip.ecc.strength; - return jz4780_bch_correct(nfc->bch, ¶ms, dat, read_ecc); + return ingenic_ecc_correct(nfc->ecc, ¶ms, dat, read_ecc); } static int ingenic_nand_attach_chip(struct nand_chip *chip) @@ -165,8 +165,8 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip) switch (chip->ecc.mode) { case NAND_ECC_HW: - if (!nfc->bch) { - dev_err(nfc->dev, "HW BCH selected, but BCH controller not found\n"); + if (!nfc->ecc) { + dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n"); return -ENODEV; } @@ -176,7 +176,7 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip) /* fall through */ case NAND_ECC_SOFT: dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n", - (nfc->bch) ? "hardware BCH" : "software ECC", + (nfc->ecc) ? "hardware ECC" : "software ECC", chip->ecc.strength, chip->ecc.size, chip->ecc.bytes); break; case NAND_ECC_NONE: @@ -354,12 +354,12 @@ static int ingenic_nand_probe(struct platform_device *pdev) return -ENOMEM; /* - * Check for BCH HW before we call nand_scan_ident, to prevent us from - * having to call it again if the BCH driver returns -EPROBE_DEFER. + * Check for ECC HW before we call nand_scan_ident, to prevent us from + * having to call it again if the ECC driver returns -EPROBE_DEFER. */ - nfc->bch = of_jz4780_bch_get(dev->of_node); - if (IS_ERR(nfc->bch)) - return PTR_ERR(nfc->bch); + nfc->ecc = of_ingenic_ecc_get(dev->of_node); + if (IS_ERR(nfc->ecc)) + return PTR_ERR(nfc->ecc); nfc->dev = dev; nfc->num_banks = num_banks; @@ -369,8 +369,8 @@ static int ingenic_nand_probe(struct platform_device *pdev) ret = ingenic_nand_init_chips(nfc, pdev); if (ret) { - if (nfc->bch) - jz4780_bch_release(nfc->bch); + if (nfc->ecc) + ingenic_ecc_release(nfc->ecc); return ret; } @@ -382,8 +382,8 @@ static int ingenic_nand_remove(struct platform_device *pdev) { struct ingenic_nfc *nfc = platform_get_drvdata(pdev); - if (nfc->bch) - jz4780_bch_release(nfc->bch); + if (nfc->ecc) + ingenic_ecc_release(nfc->ecc); ingenic_nand_cleanup_chips(nfc); diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c index 7635753bd7ea..079266a0d6cf 100644 --- a/drivers/mtd/nand/raw/ingenic/jz4780_bch.c +++ b/drivers/mtd/nand/raw/ingenic/jz4780_bch.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * JZ4780 BCH controller + * JZ4780 BCH controller driver * * Copyright (c) 2015 Imagination Technologies * Author: Alex Smith @@ -8,18 +8,15 @@ #include #include -#include -#include +#include +#include #include #include #include -#include #include #include -#include -#include -#include "jz4780_bch.h" +#include "ingenic_ecc.h" #define BCH_BHCR 0x0 #define BCH_BHCCR 0x8 @@ -62,15 +59,8 @@ /* Timeout for BCH calculation/correction. */ #define BCH_TIMEOUT_US 100000 -struct jz4780_bch { - struct device *dev; - void __iomem *base; - struct clk *clk; - struct mutex lock; -}; - -static void jz4780_bch_reset(struct jz4780_bch *bch, - struct jz4780_bch_params *params, bool encode) +static void jz4780_bch_reset(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, bool encode) { u32 reg; @@ -90,13 +80,13 @@ static void jz4780_bch_reset(struct jz4780_bch *bch, writel(reg, bch->base + BCH_BHCR); } -static void jz4780_bch_disable(struct jz4780_bch *bch) +static void jz4780_bch_disable(struct ingenic_ecc *bch) { writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT); writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR); } -static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf, +static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf, size_t size) { size_t size32 = size / sizeof(u32); @@ -113,7 +103,7 @@ static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf, writeb(*src8++, bch->base + BCH_BHDR); } -static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf, +static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf, size_t size) { size_t size32 = size / sizeof(u32); @@ -143,7 +133,7 @@ static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf, } } -static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq, +static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq, u32 *status) { u32 reg; @@ -167,18 +157,9 @@ static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq, return true; } -/** - * jz4780_bch_calculate() - calculate ECC for a data buffer - * @bch: BCH device. - * @params: BCH parameters. - * @buf: input buffer with raw data. - * @ecc_code: output buffer with ECC. - * - * Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH - * controller. - */ -int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params, - const u8 *buf, u8 *ecc_code) +static int jz4780_calculate(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + const u8 *buf, u8 *ecc_code) { int ret = 0; @@ -198,23 +179,10 @@ int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *param mutex_unlock(&bch->lock); return ret; } -EXPORT_SYMBOL(jz4780_bch_calculate); -/** - * jz4780_bch_correct() - detect and correct bit errors - * @bch: BCH device. - * @params: BCH parameters. - * @buf: raw data read from the chip. - * @ecc_code: ECC read from the chip. - * - * Given the raw data and the ECC read from the NAND device, detects and - * corrects errors in the data. - * - * Return: the number of bit errors corrected, -EBADMSG if there are too many - * errors to correct or -ETIMEDOUT if we timed out waiting for the controller. - */ -int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params, - u8 *buf, u8 *ecc_code) +static int jz4780_correct(struct ingenic_ecc *bch, + struct ingenic_ecc_params *params, + u8 *buf, u8 *ecc_code) { u32 reg, mask, index; int i, ret, count; @@ -260,110 +228,30 @@ out: mutex_unlock(&bch->lock); return ret; } -EXPORT_SYMBOL(jz4780_bch_correct); - -/** - * jz4780_bch_get() - get the BCH controller device - * @np: BCH device tree node. - * - * Gets the BCH controller device from the specified device tree node. The - * device must be released with jz4780_bch_release() when it is no longer being - * used. - * - * Return: a pointer to jz4780_bch, errors are encoded into the pointer. - * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet. - */ -static struct jz4780_bch *jz4780_bch_get(struct device_node *np) -{ - struct platform_device *pdev; - struct jz4780_bch *bch; - - pdev = of_find_device_by_node(np); - if (!pdev) - return ERR_PTR(-EPROBE_DEFER); - - bch = platform_get_drvdata(pdev); - if (!bch) { - put_device(&pdev->dev); - return ERR_PTR(-EPROBE_DEFER); - } - - clk_prepare_enable(bch->clk); - - return bch; -} - -/** - * of_jz4780_bch_get() - get the BCH controller from a DT node - * @of_node: the node that contains a bch-controller property. - * - * Get the bch-controller property from the given device tree - * node and pass it to jz4780_bch_get to do the work. - * - * Return: a pointer to jz4780_bch, errors are encoded into the pointer. - * PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet. - */ -struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node) -{ - struct jz4780_bch *bch = NULL; - struct device_node *np; - - np = of_parse_phandle(of_node, "ingenic,bch-controller", 0); - - if (np) { - bch = jz4780_bch_get(np); - of_node_put(np); - } - return bch; -} -EXPORT_SYMBOL(of_jz4780_bch_get); - -/** - * jz4780_bch_release() - release the BCH controller device - * @bch: BCH device. - */ -void jz4780_bch_release(struct jz4780_bch *bch) -{ - clk_disable_unprepare(bch->clk); - put_device(bch->dev); -} -EXPORT_SYMBOL(jz4780_bch_release); static int jz4780_bch_probe(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct jz4780_bch *bch; - struct resource *res; + struct ingenic_ecc *bch; + int ret; - bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL); - if (!bch) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bch->base = devm_ioremap_resource(dev, res); - if (IS_ERR(bch->base)) - return PTR_ERR(bch->base); - - jz4780_bch_disable(bch); - - bch->clk = devm_clk_get(dev, NULL); - if (IS_ERR(bch->clk)) { - dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk)); - return PTR_ERR(bch->clk); - } + ret = ingenic_ecc_probe(pdev); + if (ret) + return ret; + bch = platform_get_drvdata(pdev); clk_set_rate(bch->clk, BCH_CLK_RATE); - mutex_init(&bch->lock); - - bch->dev = dev; - platform_set_drvdata(pdev, bch); - return 0; } +static const struct ingenic_ecc_ops jz4780_bch_ops = { + .disable = jz4780_bch_disable, + .calculate = jz4780_calculate, + .correct = jz4780_correct, +}; + static const struct of_device_id jz4780_bch_dt_match[] = { - { .compatible = "ingenic,jz4780-bch" }, + { .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops }, {}, }; MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match); diff --git a/drivers/mtd/nand/raw/ingenic/jz4780_bch.h b/drivers/mtd/nand/raw/ingenic/jz4780_bch.h deleted file mode 100644 index 451e0c770160..000000000000 --- a/drivers/mtd/nand/raw/ingenic/jz4780_bch.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * JZ4780 BCH controller - * - * Copyright (c) 2015 Imagination Technologies - * Author: Alex Smith - */ - -#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__ -#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__ - -#include - -struct device; -struct device_node; -struct jz4780_bch; - -/** - * struct jz4780_bch_params - BCH parameters - * @size: data bytes per ECC step. - * @bytes: ECC bytes per step. - * @strength: number of correctable bits per ECC step. - */ -struct jz4780_bch_params { - int size; - int bytes; - int strength; -}; - -int jz4780_bch_calculate(struct jz4780_bch *bch, - struct jz4780_bch_params *params, - const u8 *buf, u8 *ecc_code); -int jz4780_bch_correct(struct jz4780_bch *bch, - struct jz4780_bch_params *params, u8 *buf, - u8 *ecc_code); - -void jz4780_bch_release(struct jz4780_bch *bch); -struct jz4780_bch *of_jz4780_bch_get(struct device_node *np); - -#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */