microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

regulator: stpmic1: Remove support for regulator pull down 

Regulator high pull down are enabled by default so remove support in the
driver.

Signed-off-by: pascal paillet <p.paillet@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Pascal PAILLET-LME 2019-02-19 10:04:33 +00:00 коммит произвёл Mark Brown
Родитель f369788894
Коммит 1614f086d5
Не найден ключ, соответствующий данной подписи
Идентификатор ключа GPG: 24D68B725D5487D0
1 изменённых файлов: 0 добавлений и 12 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

12
drivers/regulator/stpmic1_regulator.c
Просмотреть файл

@ -133,7 +133,6 @@ static const struct regulator_ops stpmic1_ldo_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
@ -145,7 +144,6 @@ static const struct regulator_ops stpmic1_ldo3_ops = {
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
.set_over_current_protection = stpmic1_set_icc,
@ -155,7 +153,6 @@ static const struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
.set_over_current_protection = stpmic1_set_icc,
};
@ -177,7 +174,6 @@ static const struct regulator_ops stpmic1_vref_ddr_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_pull_down = regulator_set_pull_down_regmap,
};
static const struct regulator_ops stpmic1_switch_regul_ops = {
@ -203,8 +199,6 @@ static const struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -228,8 +222,6 @@ static const struct regulator_ops stpmic1_switch_regul_ops = {
.bypass_mask = LDO_BYPASS_MASK, \
.bypass_val_on = LDO_BYPASS_MASK, \
.bypass_val_off = 0, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -247,8 +239,6 @@ static const struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}
@ -288,8 +278,6 @@ static const struct regulator_ops stpmic1_switch_regul_ops = {
.enable_val = 1, \
.disable_val = 0, \
.enable_time = PMIC_ENABLE_TIME_US, \
.pull_down_reg = ids##_PULL_DOWN_REG, \
.pull_down_mask = ids##_PULL_DOWN_MASK, \
.supply_name = #base, \
}