Merge 'mmc/upstream' into late/mvebu2

These patches from the mmc tree were merged into v3.9 already
and the later mvebu patches depend on them.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2013-02-28 18:53:01 +01:00
Родитель 04ee16bdf4 6f1989bc98
Коммит 168268a225
250 изменённых файлов: 2094 добавлений и 1179 удалений

Просмотреть файл

@ -141,3 +141,4 @@ Version History
1.2.0 Handle creation of arrays that contain failed devices.
1.3.0 Added support for RAID 10
1.3.1 Allow device replacement/rebuild for RAID 10
1.3.2 Fix/improve redundancy checking for RAID10

0
Documentation/hid/hid-sensor.txt Executable file → Normal file
Просмотреть файл

Просмотреть файл

@ -57,6 +57,10 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover
protocol entry point.
Protocol 2.12: (Kernel 3.9) Added the xloadflags field and extension fields
to struct boot_params for for loading bzImage and ramdisk
above 4G in 64bit.
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
@ -182,7 +186,7 @@ Offset Proto Name Meaning
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
0235/1 2.10+ min_alignment Minimum alignment, as a power of two
0236/2 N/A pad3 Unused
0236/2 2.12+ xloadflags Boot protocol option flags
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
@ -582,6 +586,27 @@ Protocol: 2.10+
misaligned kernel. Therefore, a loader should typically try each
power-of-two alignment from kernel_alignment down to this alignment.
Field name: xloadflags
Type: read
Offset/size: 0x236/2
Protocol: 2.12+
This field is a bitmask.
Bit 0 (read): XLF_KERNEL_64
- If 1, this kernel has the legacy 64-bit entry point at 0x200.
Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
- If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
Bit 2 (read): XLF_EFI_HANDOVER_32
- If 1, the kernel supports the 32-bit EFI handoff entry point
given at handover_offset.
Bit 3 (read): XLF_EFI_HANDOVER_64
- If 1, the kernel supports the 64-bit EFI handoff entry point
given at handover_offset + 0x200.
Field name: cmdline_size
Type: read
Offset/size: 0x238/4

Просмотреть файл

@ -19,6 +19,9 @@ Offset Proto Name Meaning
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
0C0/004 ALL ext_ramdisk_image ramdisk_image high 32bits
0C4/004 ALL ext_ramdisk_size ramdisk_size high 32bits
0C8/004 ALL ext_cmd_line_ptr cmd_line_ptr high 32bits
140/080 ALL edid_info Video mode setup (struct edid_info)
1C0/020 ALL efi_info EFI 32 information (struct efi_info)
1E0/004 ALL alk_mem_k Alternative mem check, in KB
@ -27,6 +30,7 @@ Offset Proto Name Meaning
1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below)
1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer
(below)
1EF/001 ALL sentinel Used to detect broken bootloaders
290/040 ALL edd_mbr_sig_buffer EDD MBR signatures
2D0/A00 ALL e820_map E820 memory map table
(array of struct e820entry)

Просмотреть файл

@ -2966,7 +2966,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -4905,7 +4905,7 @@ S: Maintained
MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
M: Mirko Lindner <mlindner@marvell.com>
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -5180,7 +5180,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@vyatta.com>
M: Stephen Hemminger <stephen@networkplumber.org>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -7088,7 +7088,7 @@ F: include/uapi/sound/
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
M: Liam Girdwood <lrg@ti.com>
M: Liam Girdwood <lgirdwood@gmail.com>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
L: alsa-devel@alsa-project.org (moderated for non-subscribers)

Просмотреть файл

@ -1,8 +1,8 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc5
NAME = Terrified Chipmunk
EXTRAVERSION = -rc6
NAME = Unicycling Gorilla
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

Просмотреть файл

@ -8,8 +8,10 @@ config BCM47XX_SSB
select SSB_DRIVER_EXTIF
select SSB_EMBEDDED
select SSB_B43_PCI_BRIDGE if PCI
select SSB_DRIVER_PCICORE if PCI
select SSB_PCICORE_HOSTMODE if PCI
select SSB_DRIVER_GPIO
select GPIOLIB
default y
help
Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@ -25,6 +27,7 @@ config BCM47XX_BCMA
select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
select BCMA_DRIVER_GPIO
select GPIOLIB
default y
help
Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

Просмотреть файл

@ -30,6 +30,7 @@
* measurement, and debugging facilities.
*/
#include <linux/compiler.h>
#include <linux/irqflags.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-l2c.h>
@ -285,22 +286,22 @@ uint64_t cvmx_l2c_read_perf(uint32_t counter)
*/
static void fault_in(uint64_t addr, int len)
{
volatile char *ptr;
volatile char dummy;
char *ptr;
/*
* Adjust addr and length so we get all cache lines even for
* small ranges spanning two cache lines.
*/
len += addr & CVMX_CACHE_LINE_MASK;
addr &= ~CVMX_CACHE_LINE_MASK;
ptr = (volatile char *)cvmx_phys_to_ptr(addr);
ptr = cvmx_phys_to_ptr(addr);
/*
* Invalidate L1 cache to make sure all loads result in data
* being in L2.
*/
CVMX_DCACHE_INVALIDATE;
while (len > 0) {
dummy += *ptr;
ACCESS_ONCE(*ptr);
len -= CVMX_CACHE_LINE_SIZE;
ptr += CVMX_CACHE_LINE_SIZE;
}

Просмотреть файл

@ -16,7 +16,7 @@
#include <asm/mipsregs.h>
#define DSP_DEFAULT 0x00000000
#define DSP_MASK 0x3ff
#define DSP_MASK 0x3f
#define __enable_dsp_hazard() \
do { \

Просмотреть файл

@ -353,6 +353,7 @@ union mips_instruction {
struct u_format u_format;
struct c_format c_format;
struct r_format r_format;
struct p_format p_format;
struct f_format f_format;
struct ma_format ma_format;
struct b_format b_format;

Просмотреть файл

@ -21,4 +21,4 @@
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */
#endif /* __ASM_MIPS_MACH_PNX833X_WAR_H */

Просмотреть файл

@ -230,6 +230,7 @@ static inline void pud_clear(pud_t *pudp)
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT))
#define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
#define pfn_pmd(pfn, prot) __pmd(((pfn) << _PFN_SHIFT) | pgprot_val(prot))
#endif
#define __pgd_offset(address) pgd_index(address)

Просмотреть файл

@ -3,6 +3,7 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += auxvec.h
header-y += bitsperlong.h
header-y += break.h
header-y += byteorder.h
header-y += cachectl.h
header-y += errno.h

Просмотреть файл

Просмотреть файл

@ -25,6 +25,12 @@
#define MCOUNT_OFFSET_INSNS 4
#endif
/* Arch override because MIPS doesn't need to run this from stop_machine() */
void arch_ftrace_update_code(int command)
{
ftrace_modify_all_code(command);
}
/*
* Check if the address is in kernel space
*
@ -89,6 +95,24 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
return 0;
}
#ifndef CONFIG_64BIT
static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1,
unsigned int new_code2)
{
int faulted;
safe_store_code(new_code1, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
ip += 4;
safe_store_code(new_code2, ip, faulted);
if (unlikely(faulted))
return -EFAULT;
flush_icache_range(ip, ip + 8); /* original ip + 12 */
return 0;
}
#endif
/*
* The details about the calling site of mcount on MIPS
*
@ -131,8 +155,18 @@ int ftrace_make_nop(struct module *mod,
* needed.
*/
new = in_kernel_space(ip) ? INSN_NOP : INSN_B_1F;
#ifdef CONFIG_64BIT
return ftrace_modify_code(ip, new);
#else
/*
* On 32 bit MIPS platforms, gcc adds a stack adjust
* instruction in the delay slot after the branch to
* mcount and expects mcount to restore the sp on return.
* This is based on a legacy API and does nothing but
* waste instructions so it's being removed at runtime.
*/
return ftrace_modify_code_2(ip, new, INSN_NOP);
#endif
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)

Просмотреть файл

@ -46,9 +46,8 @@
PTR_L a5, PT_R9(sp)
PTR_L a6, PT_R10(sp)
PTR_L a7, PT_R11(sp)
PTR_ADDIU sp, PT_SIZE
#else
PTR_ADDIU sp, (PT_SIZE + 8)
PTR_ADDIU sp, PT_SIZE
#endif
.endm
@ -69,7 +68,9 @@ NESTED(ftrace_caller, PT_SIZE, ra)
.globl _mcount
_mcount:
b ftrace_stub
nop
addiu sp,sp,8
/* When tracing is activated, it calls ftrace_caller+8 (aka here) */
lw t1, function_trace_stop
bnez t1, ftrace_stub
nop

Просмотреть файл

@ -705,7 +705,7 @@ static int vpe_run(struct vpe * v)
printk(KERN_WARNING
"VPE loader: TC %d is already in use.\n",
t->index);
v->tc->index);
return -ENOEXEC;
}
} else {

Просмотреть файл

@ -408,7 +408,7 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
#endif
/* tell oprofile which irq to use */
cp0_perfcount_irq = LTQ_PERF_IRQ;
cp0_perfcount_irq = irq_create_mapping(ltq_domain, LTQ_PERF_IRQ);
/*
* if the timer irq is not one of the mips irqs we need to

Просмотреть файл

@ -21,7 +21,7 @@ void __delay(unsigned long loops)
" .set noreorder \n"
" .align 3 \n"
"1: bnez %0, 1b \n"
#if __SIZEOF_LONG__ == 4
#if BITS_PER_LONG == 32
" subu %0, 1 \n"
#else
" dsubu %0, 1 \n"

Просмотреть файл

@ -190,9 +190,3 @@ void __iounmap(const volatile void __iomem *addr)
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(__iounmap);
int __virt_addr_valid(const volatile void *kaddr)
{
return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
}
EXPORT_SYMBOL_GPL(__virt_addr_valid);

Просмотреть файл

@ -192,3 +192,9 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
return ret;
}
int __virt_addr_valid(const volatile void *kaddr)
{
return pfn_valid(PFN_DOWN(virt_to_phys(kaddr)));
}
EXPORT_SYMBOL_GPL(__virt_addr_valid);

Просмотреть файл

@ -193,8 +193,11 @@ static void nlm_init_node(void)
void __init prom_init(void)
{
int i, *argv, *envp; /* passed as 32 bit ptrs */
int *argv, *envp; /* passed as 32 bit ptrs */
struct psb_info *prom_infop;
#ifdef CONFIG_SMP
int i;
#endif
/* truncate to 32 bit and sign extend all args */
argv = (int *)(long)(int)fw_arg1;

Просмотреть файл

@ -24,7 +24,7 @@
#include <asm/mach-ath79/pci.h>
#define AR71XX_PCI_MEM_BASE 0x10000000
#define AR71XX_PCI_MEM_SIZE 0x08000000
#define AR71XX_PCI_MEM_SIZE 0x07000000
#define AR71XX_PCI_WIN0_OFFS 0x10000000
#define AR71XX_PCI_WIN1_OFFS 0x11000000

Просмотреть файл

@ -21,7 +21,7 @@
#define AR724X_PCI_CTRL_SIZE 0x100
#define AR724X_PCI_MEM_BASE 0x10000000
#define AR724X_PCI_MEM_SIZE 0x08000000
#define AR724X_PCI_MEM_SIZE 0x04000000
#define AR724X_PCI_REG_RESET 0x18
#define AR724X_PCI_REG_INT_STATUS 0x4c

Просмотреть файл

@ -439,6 +439,8 @@ ret_from_fork:
ret_from_kernel_thread:
REST_NVGPRS(r1)
bl schedule_tail
li r3,0
stw r3,0(r1)
mtlr r14
mr r3,r15
PPC440EP_ERR42

Просмотреть файл

@ -664,6 +664,19 @@ resume_kernel:
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
/*
* arch_local_irq_restore() from preempt_schedule_irq above may
* enable hard interrupt but we really should disable interrupts
* when we return from the interrupt, and so that we don't get
* interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq

Просмотреть файл

@ -154,12 +154,12 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
static int kgdb_singlestep(struct pt_regs *regs)
{
struct thread_info *thread_info, *exception_thread_info;
struct thread_info *backup_current_thread_info = \
(struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
struct thread_info *backup_current_thread_info;
if (user_mode(regs))
return 0;
backup_current_thread_info = (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL);
/*
* On Book E and perhaps other processors, singlestep is handled on
* the critical exception stack. This causes current_thread_info()
@ -185,6 +185,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
/* Restore current_thread_info lastly. */
memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
kfree(backup_current_thread_info);
return 1;
}

Просмотреть файл

@ -494,10 +494,15 @@ void timer_interrupt(struct pt_regs * regs)
set_dec(DECREMENTER_MAX);
/* Some implementations of hotplug will get timer interrupts while
* offline, just ignore these
* offline, just ignore these and we also need to set
* decrementers_next_tb as MAX to make sure __check_irq_replay
* don't replay timer interrupt when return, otherwise we'll trap
* here infinitely :(
*/
if (!cpu_online(smp_processor_id()))
if (!cpu_online(smp_processor_id())) {
*next_tb = ~(u64)0;
return;
}
/* Conditionally hard-enable interrupts now that the DEC has been
* bumped to its maximum value

Просмотреть файл

@ -52,7 +52,7 @@ static int power7_marked_instr_event(u64 mmcr1)
for (pmc = 0; pmc < 4; pmc++) {
psel = mmcr1 & (OPROFILE_PM_PMCSEL_MSK
<< (OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_MAX_PMC_NUM);
* OPROFILE_PMSEL_FIELD_WIDTH);
psel = (psel >> ((OPROFILE_MAX_PMC_NUM - pmc)
* OPROFILE_PMSEL_FIELD_WIDTH)) & ~1ULL;
unit = mmcr1 & (OPROFILE_PM_UNIT_MSK

Просмотреть файл

@ -236,6 +236,13 @@ out:
static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
/*
* We don't support CPU hotplug. Don't unmap after the system
* has already made it to a running state.
*/
if (system_state != SYSTEM_BOOTING)
return 0;
if (sdcasr_mapbase)
iounmap(sdcasr_mapbase);
if (sdcpwr_mapbase)

Просмотреть файл

@ -1365,6 +1365,18 @@ static inline void pmdp_invalidate(struct vm_area_struct *vma,
__pmd_idte(address, pmdp);
}
#define __HAVE_ARCH_PMDP_SET_WRPROTECT
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long address, pmd_t *pmdp)
{
pmd_t pmd = *pmdp;
if (pmd_write(pmd)) {
__pmd_idte(address, pmdp);
set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
}
}
static inline pmd_t mk_pmd_phys(unsigned long physpage, pgprot_t pgprot)
{
pmd_t __pmd;

Просмотреть файл

@ -2138,6 +2138,7 @@ config OLPC_XO1_RTC
config OLPC_XO1_SCI
bool "OLPC XO-1 SCI extras"
depends on OLPC && OLPC_XO1_PM
depends on INPUT=y
select POWER_SUPPLY
select GPIO_CS5535
select MFD_CORE

Просмотреть файл

@ -71,7 +71,7 @@ GCOV_PROFILE := n
$(obj)/bzImage: asflags-y := $(SVGA_MODE)
quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@
cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@
$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@ -92,7 +92,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)
sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@

Просмотреть файл

@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
int i;
struct setup_data *data;
data = (struct setup_data *)params->hdr.setup_data;
data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
while (data && data->next)
data = (struct setup_data *)data->next;
data = (struct setup_data *)(unsigned long)data->next;
status = efi_call_phys5(sys_table->boottime->locate_handle,
EFI_LOCATE_BY_PROTOCOL, &pci_proto,
@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
if (!pci)
continue;
#ifdef CONFIG_X86_64
status = efi_call_phys4(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0,
&attributes);
#else
status = efi_call_phys5(pci->attributes, pci,
EfiPciIoAttributeOperationGet, 0, 0,
&attributes);
#endif
if (status != EFI_SUCCESS)
continue;
if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM))
continue;
if (!pci->romimage || !pci->romsize)
continue;
@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params)
memcpy(rom->romdata, pci->romimage, pci->romsize);
if (data)
data->next = (uint64_t)rom;
data->next = (unsigned long)rom;
else
params->hdr.setup_data = (uint64_t)rom;
params->hdr.setup_data = (unsigned long)rom;
data = (struct setup_data *)rom;
@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto,
* Once we've found a GOP supporting ConOut,
* don't bother looking any further.
*/
first_gop = gop;
if (conout_found)
break;
first_gop = gop;
}
}

Просмотреть файл

@ -35,11 +35,11 @@ ENTRY(startup_32)
#ifdef CONFIG_EFI_STUB
jmp preferred_addr
.balign 0x10
/*
* We don't need the return address, so set up the stack so
* efi_main() can find its arugments.
* efi_main() can find its arguments.
*/
ENTRY(efi_pe_entry)
add $0x4, %esp
call make_boot_params
@ -50,8 +50,10 @@ ENTRY(startup_32)
pushl %eax
pushl %esi
pushl %ecx
sub $0x4, %esp
.org 0x30,0x90
ENTRY(efi_stub_entry)
add $0x4, %esp
call efi_main
cmpl $0, %eax
movl %eax, %esi

Просмотреть файл

@ -201,12 +201,12 @@ ENTRY(startup_64)
*/
#ifdef CONFIG_EFI_STUB
/*
* The entry point for the PE/COFF executable is 0x210, so only
* legacy boot loaders will execute this jmp.
* The entry point for the PE/COFF executable is efi_pe_entry, so
* only legacy boot loaders will execute this jmp.
*/
jmp preferred_addr
.org 0x210
ENTRY(efi_pe_entry)
mov %rcx, %rdi
mov %rdx, %rsi
pushq %rdi
@ -218,7 +218,7 @@ ENTRY(startup_64)
popq %rsi
popq %rdi
.org 0x230,0x90
ENTRY(efi_stub_entry)
call efi_main
movq %rax,%rsi
cmpq $0,%rax

Просмотреть файл

@ -21,6 +21,7 @@
#include <asm/e820.h>
#include <asm/page_types.h>
#include <asm/setup.h>
#include <asm/bootparam.h>
#include "boot.h"
#include "voffset.h"
#include "zoffset.h"
@ -255,6 +256,9 @@ section_table:
# header, from the old boot sector.
.section ".header", "a"
.globl sentinel
sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */
.globl hdr
hdr:
setup_sects: .byte 0 /* Filled in by build.c */
@ -279,7 +283,7 @@ _start:
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
.word 0x020b # header version number (>= 0x0105)
.word 0x020c # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@ -297,13 +301,7 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer
# flags, unused bits must be zero (RFU) bit within loadflags
loadflags:
LOADED_HIGH = 1 # If set, the kernel is loaded high
CAN_USE_HEAP = 0x80 # If set, the loader also has set
# heap_end_ptr to tell how much
# space behind setup.S can be used for
# heap purposes.
# Only the loader knows what is free
.byte LOADED_HIGH
.byte LOADED_HIGH # The kernel is to be loaded high
setup_move_size: .word 0x8000 # size to move, when setup is not
# loaded at 0x90000. We will move setup
@ -369,7 +367,23 @@ relocatable_kernel: .byte 1
relocatable_kernel: .byte 0
#endif
min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0
xloadflags:
#ifdef CONFIG_X86_64
# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */
#else
# define XLF0 0
#endif
#ifdef CONFIG_EFI_STUB
# ifdef CONFIG_X86_64
# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */
# else
# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */
# endif
#else
# define XLF23 0
#endif
.word XLF0 | XLF23
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
#added with boot protocol
@ -397,8 +411,13 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
#define INIT_SIZE VO_INIT_SIZE
#endif
init_size: .long INIT_SIZE # kernel initialization size
handover_offset: .long 0x30 # offset to the handover
handover_offset:
#ifdef CONFIG_EFI_STUB
.long 0x30 # offset to the handover
# protocol entry point
#else
.long 0
#endif
# End of setup header #####################################################

Просмотреть файл

@ -13,7 +13,7 @@ SECTIONS
.bstext : { *(.bstext) }
.bsdata : { *(.bsdata) }
. = 497;
. = 495;
.header : { *(.header) }
.entrytext : { *(.entrytext) }
.inittext : { *(.inittext) }

Просмотреть файл

@ -52,6 +52,10 @@ int is_big_kernel;
#define PECOFF_RELOC_RESERVE 0x20
unsigned long efi_stub_entry;
unsigned long efi_pe_entry;
unsigned long startup_64;
/*----------------------------------------------------------------------*/
static const u32 crctab32[] = {
@ -132,7 +136,7 @@ static void die(const char * str, ...)
static void usage(void)
{
die("Usage: build setup system [> image]");
die("Usage: build setup system [zoffset.h] [> image]");
}
#ifdef CONFIG_EFI_STUB
@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz)
*/
put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]);
#ifdef CONFIG_X86_32
/*
* Address of entry point.
*
* The EFI stub entry point is +16 bytes from the start of
* the .text section.
* Address of entry point for PE/COFF executable
*/
put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]);
#else
/*
* Address of entry point. startup_32 is at the beginning and
* the 64-bit entry point (startup_64) is always 512 bytes
* after. The EFI stub entry point is 16 bytes after that, as
* the first instruction allows legacy loaders to jump over
* the EFI stub initialisation
*/
put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]);
#endif /* CONFIG_X86_32 */
put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]);
update_pecoff_section_header(".text", text_start, text_sz);
}
#endif /* CONFIG_EFI_STUB */
/*
* Parse zoffset.h and find the entry points. We could just #include zoffset.h
* but that would mean tools/build would have to be rebuilt every time. It's
* not as if parsing it is hard...
*/
#define PARSE_ZOFS(p, sym) do { \
if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \
sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \
} while (0)
static void parse_zoffset(char *fname)
{
FILE *file;
char *p;
int c;
file = fopen(fname, "r");
if (!file)
die("Unable to open `%s': %m", fname);
c = fread(buf, 1, sizeof(buf) - 1, file);
if (ferror(file))
die("read-error on `zoffset.h'");
buf[c] = 0;
p = (char *)buf;
while (p && *p) {
PARSE_ZOFS(p, efi_stub_entry);
PARSE_ZOFS(p, efi_pe_entry);
PARSE_ZOFS(p, startup_64);
p = strchr(p, '\n');
while (p && (*p == '\r' || *p == '\n'))
p++;
}
}
int main(int argc, char ** argv)
{
unsigned int i, sz, setup_sectors;
@ -241,7 +269,19 @@ int main(int argc, char ** argv)
void *kernel;
u32 crc = 0xffffffffUL;
if (argc != 3)
/* Defaults for old kernel */
#ifdef CONFIG_X86_32
efi_pe_entry = 0x10;
efi_stub_entry = 0x30;
#else
efi_pe_entry = 0x210;
efi_stub_entry = 0x230;
startup_64 = 0x200;
#endif
if (argc == 4)
parse_zoffset(argv[3]);
else if (argc != 3)
usage();
/* Copy the setup code */
@ -299,6 +339,11 @@ int main(int argc, char ** argv)
#ifdef CONFIG_EFI_STUB
update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz));
#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */
efi_stub_entry -= 0x200;
#endif
put_unaligned_le32(efi_stub_entry, &buf[0x264]);
#endif
crc = partial_crc32(buf, i, crc);

Просмотреть файл

@ -94,6 +94,7 @@ extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
#endif /* CONFIG_X86_32 */
extern int add_efi_memmap;
extern unsigned long x86_efi_facility;
extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
extern int efi_memblock_x86_reserve_range(void);
extern void efi_call_phys_prelog(void);

Просмотреть файл

@ -16,7 +16,7 @@ extern void uv_system_init(void);
extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm,
unsigned long start,
unsigned end,
unsigned long end,
unsigned int cpu);
#else /* X86_UV */

Просмотреть файл

@ -1,6 +1,31 @@
#ifndef _ASM_X86_BOOTPARAM_H
#define _ASM_X86_BOOTPARAM_H
/* setup_data types */
#define SETUP_NONE 0
#define SETUP_E820_EXT 1
#define SETUP_DTB 2
#define SETUP_PCI 3
/* ram_size flags */
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
/* loadflags */
#define LOADED_HIGH (1<<0)
#define QUIET_FLAG (1<<5)
#define KEEP_SEGMENTS (1<<6)
#define CAN_USE_HEAP (1<<7)
/* xloadflags */
#define XLF_KERNEL_64 (1<<0)
#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1)
#define XLF_EFI_HANDOVER_32 (1<<2)
#define XLF_EFI_HANDOVER_64 (1<<3)
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <linux/screen_info.h>
#include <linux/apm_bios.h>
@ -9,12 +34,6 @@
#include <asm/ist.h>
#include <video/edid.h>
/* setup data types */
#define SETUP_NONE 0
#define SETUP_E820_EXT 1
#define SETUP_DTB 2
#define SETUP_PCI 3
/* extensible setup data list node */
struct setup_data {
__u64 next;
@ -28,9 +47,6 @@ struct setup_header {
__u16 root_flags;
__u32 syssize;
__u16 ram_size;
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
__u16 vid_mode;
__u16 root_dev;
__u16 boot_flag;
@ -42,10 +58,6 @@ struct setup_header {
__u16 kernel_version;
__u8 type_of_loader;
__u8 loadflags;
#define LOADED_HIGH (1<<0)
#define QUIET_FLAG (1<<5)
#define KEEP_SEGMENTS (1<<6)
#define CAN_USE_HEAP (1<<7)
__u16 setup_move_size;
__u32 code32_start;
__u32 ramdisk_image;
@ -58,7 +70,8 @@ struct setup_header {
__u32 initrd_addr_max;
__u32 kernel_alignment;
__u8 relocatable_kernel;
__u8 _pad2[3];
__u8 min_alignment;
__u16 xloadflags;
__u32 cmdline_size;
__u32 hardware_subarch;
__u64 hardware_subarch_data;
@ -106,7 +119,10 @@ struct boot_params {
__u8 hd1_info[16]; /* obsolete! */ /* 0x090 */
struct sys_desc_table sys_desc_table; /* 0x0a0 */
struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */
__u8 _pad4[128]; /* 0x0c0 */
__u32 ext_ramdisk_image; /* 0x0c0 */
__u32 ext_ramdisk_size; /* 0x0c4 */
__u32 ext_cmd_line_ptr; /* 0x0c8 */
__u8 _pad4[116]; /* 0x0cc */
struct edid_info edid_info; /* 0x140 */
struct efi_info efi_info; /* 0x1c0 */
__u32 alt_mem_k; /* 0x1e0 */
@ -115,7 +131,20 @@ struct boot_params {
__u8 eddbuf_entries; /* 0x1e9 */
__u8 edd_mbr_sig_buf_entries; /* 0x1ea */
__u8 kbd_status; /* 0x1eb */
__u8 _pad6[5]; /* 0x1ec */
__u8 _pad5[3]; /* 0x1ec */
/*
* The sentinel is set to a nonzero value (0xff) in header.S.
*
* A bootloader is supposed to only take setup_header and put
* it into a clean boot_params buffer. If it turns out that
* it is clumsy or too generous with the buffer, it most
* probably will pick up the sentinel variable too. The fact
* that this variable then is still 0xff will let kernel
* know that some variables in boot_params are invalid and
* kernel should zero out certain portions of boot_params.
*/
__u8 sentinel; /* 0x1ef */
__u8 _pad6[1]; /* 0x1f0 */
struct setup_header hdr; /* setup header */ /* 0x1f1 */
__u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)];
__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
@ -134,6 +163,6 @@ enum {
X86_NR_SUBARCHS,
};
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_BOOTPARAM_H */

Просмотреть файл

@ -1781,6 +1781,7 @@ first_nmi:
* Leave room for the "copied" frame
*/
subq $(5*8), %rsp
CFI_ADJUST_CFA_OFFSET 5*8
/* Copy the stack frame to the Saved frame */
.rept 5
@ -1863,10 +1864,8 @@ end_repeat_nmi:
nmi_swapgs:
SWAPGS_UNSAFE_STACK
nmi_restore:
RESTORE_ALL 8
/* Pop the extra iret frame */
addq $(5*8), %rsp
/* Pop the extra iret frame at once */
RESTORE_ALL 6*8
/* Clear the NMI executing stack variable */
movq $0, 5*8(%rsp)

Просмотреть файл

@ -300,6 +300,12 @@ ENTRY(startup_32_smp)
leal -__PAGE_OFFSET(%ecx),%esp
default_entry:
#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \
X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \
X86_CR0_PG)
movl $(CR0_STATE & ~X86_CR0_PG),%eax
movl %eax,%cr0
/*
* New page tables may be in 4Mbyte page mode and may
* be using the global pages.
@ -364,8 +370,7 @@ default_entry:
*/
movl $pa(initial_page_table), %eax
movl %eax,%cr3 /* set the page table pointer.. */
movl %cr0,%eax
orl $X86_CR0_PG,%eax
movl $CR0_STATE,%eax
movl %eax,%cr0 /* ..and set paging (PG) bit */
ljmp $__BOOT_CS,$1f /* Clear prefetch and normalize %eip */
1:

Просмотреть файл

@ -174,6 +174,9 @@ static int msr_open(struct inode *inode, struct file *file)
unsigned int cpu;
struct cpuinfo_x86 *c;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
cpu = iminor(file->f_path.dentry->d_inode);
if (cpu >= nr_cpu_ids || !cpu_online(cpu))
return -ENXIO; /* No such CPU */

Просмотреть файл

@ -56,7 +56,7 @@ struct device x86_dma_fallback_dev = {
EXPORT_SYMBOL(x86_dma_fallback_dev);
/* Number of entries preallocated for DMA-API debugging */
#define PREALLOC_DMA_DEBUG_ENTRIES 32768
#define PREALLOC_DMA_DEBUG_ENTRIES 65536
int dma_set_mask(struct device *dev, u64 mask)
{

Просмотреть файл

@ -584,7 +584,7 @@ static void native_machine_emergency_restart(void)
break;
case BOOT_EFI:
if (efi_enabled)
if (efi_enabled(EFI_RUNTIME_SERVICES))
efi.reset_system(reboot_mode ?
EFI_RESET_WARM :
EFI_RESET_COLD,

Просмотреть файл

@ -807,15 +807,15 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_EFI
if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
"EL32", 4)) {
efi_enabled = 1;
efi_64bit = false;
set_bit(EFI_BOOT, &x86_efi_facility);
} else if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
"EL64", 4)) {
efi_enabled = 1;
efi_64bit = true;
set_bit(EFI_BOOT, &x86_efi_facility);
set_bit(EFI_64BIT, &x86_efi_facility);
}
if (efi_enabled && efi_memblock_x86_reserve_range())
efi_enabled = 0;
if (efi_enabled(EFI_BOOT))
efi_memblock_x86_reserve_range();
#endif
x86_init.oem.arch_setup();
@ -888,7 +888,7 @@ void __init setup_arch(char **cmdline_p)
finish_e820_parsing();
if (efi_enabled)
if (efi_enabled(EFI_BOOT))
efi_init();
dmi_scan_machine();
@ -971,7 +971,7 @@ void __init setup_arch(char **cmdline_p)
* The EFI specification says that boot service code won't be called
* after ExitBootServices(). This is, in fact, a lie.
*/
if (efi_enabled)
if (efi_enabled(EFI_MEMMAP))
efi_reserve_boot_services();
/* preallocate 4k for mptable mpc */
@ -1114,7 +1114,7 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
@ -1131,14 +1131,14 @@ void __init setup_arch(char **cmdline_p)
register_refined_jiffies(CLOCK_TICK_RATE);
#ifdef CONFIG_EFI
/* Once setup is done above, disable efi_enabled on mismatched
* firmware/kernel archtectures since there is no support for
* runtime services.
/* Once setup is done above, unmap the EFI memory map on
* mismatched firmware/kernel archtectures since there is no
* support for runtime services.
*/
if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
if (efi_enabled(EFI_BOOT) &&
IS_ENABLED(CONFIG_X86_64) != efi_enabled(EFI_64BIT)) {
pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
efi_unmap_memmap();
efi_enabled = 0;
}
#endif
}

Просмотреть файл

@ -51,9 +51,6 @@
#define EFI_DEBUG 1
int efi_enabled;
EXPORT_SYMBOL(efi_enabled);
struct efi __read_mostly efi = {
.mps = EFI_INVALID_TABLE_ADDR,
.acpi = EFI_INVALID_TABLE_ADDR,
@ -69,19 +66,28 @@ EXPORT_SYMBOL(efi);
struct efi_memory_map memmap;
bool efi_64bit;
static struct efi efi_phys __initdata;
static efi_system_table_t efi_systab __initdata;
static inline bool efi_is_native(void)
{
return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
return IS_ENABLED(CONFIG_X86_64) == efi_enabled(EFI_64BIT);
}
unsigned long x86_efi_facility;
/*
* Returns 1 if 'facility' is enabled, 0 otherwise.
*/
int efi_enabled(int facility)
{
return test_bit(facility, &x86_efi_facility) != 0;
}
EXPORT_SYMBOL(efi_enabled);
static int __init setup_noefi(char *arg)
{
efi_enabled = 0;
clear_bit(EFI_BOOT, &x86_efi_facility);
return 0;
}
early_param("noefi", setup_noefi);
@ -426,6 +432,7 @@ void __init efi_reserve_boot_services(void)
void __init efi_unmap_memmap(void)
{
clear_bit(EFI_MEMMAP, &x86_efi_facility);
if (memmap.map) {
early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
memmap.map = NULL;
@ -460,7 +467,7 @@ void __init efi_free_boot_services(void)
static int __init efi_systab_init(void *phys)
{
if (efi_64bit) {
if (efi_enabled(EFI_64BIT)) {
efi_system_table_64_t *systab64;
u64 tmp = 0;
@ -552,7 +559,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
void *config_tables, *tablep;
int i, sz;
if (efi_64bit)
if (efi_enabled(EFI_64BIT))
sz = sizeof(efi_config_table_64_t);
else
sz = sizeof(efi_config_table_32_t);
@ -572,7 +579,7 @@ static int __init efi_config_init(u64 tables, int nr_tables)
efi_guid_t guid;
unsigned long table;
if (efi_64bit) {
if (efi_enabled(EFI_64BIT)) {
u64 table64;
guid = ((efi_config_table_64_t *)tablep)->guid;
table64 = ((efi_config_table_64_t *)tablep)->table;
@ -684,7 +691,6 @@ void __init efi_init(void)
if (boot_params.efi_info.efi_systab_hi ||
boot_params.efi_info.efi_memmap_hi) {
pr_info("Table located above 4GB, disabling EFI.\n");
efi_enabled = 0;
return;
}
efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
@ -694,10 +700,10 @@ void __init efi_init(void)
((__u64)boot_params.efi_info.efi_systab_hi<<32));
#endif
if (efi_systab_init(efi_phys.systab)) {
efi_enabled = 0;
if (efi_systab_init(efi_phys.systab))
return;
}
set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility);
/*
* Show what we know for posterity
@ -715,10 +721,10 @@ void __init efi_init(void)
efi.systab->hdr.revision >> 16,
efi.systab->hdr.revision & 0xffff, vendor);
if (efi_config_init(efi.systab->tables, efi.systab->nr_tables)) {
efi_enabled = 0;
if (efi_config_init(efi.systab->tables, efi.systab->nr_tables))
return;
}
set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
/*
* Note: We currently don't support runtime services on an EFI
@ -727,15 +733,17 @@ void __init efi_init(void)
if (!efi_is_native())
pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
else if (efi_runtime_init()) {
efi_enabled = 0;
return;
else {
if (efi_runtime_init())
return;
set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
}
if (efi_memmap_init()) {
efi_enabled = 0;
if (efi_memmap_init())
return;
}
set_bit(EFI_MEMMAP, &x86_efi_facility);
#ifdef CONFIG_X86_32
if (efi_is_native()) {
x86_platform.get_wallclock = efi_get_time;
@ -941,7 +949,7 @@ void __init efi_enter_virtual_mode(void)
*
* Call EFI services through wrapper functions.
*/
efi.runtime_version = efi_systab.fw_revision;
efi.runtime_version = efi_systab.hdr.revision;
efi.get_time = virt_efi_get_time;
efi.set_time = virt_efi_set_time;
efi.get_wakeup_time = virt_efi_get_wakeup_time;
@ -969,6 +977,9 @@ u32 efi_mem_type(unsigned long phys_addr)
efi_memory_desc_t *md;
void *p;
if (!efi_enabled(EFI_MEMMAP))
return 0;
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
md = p;
if ((md->phys_addr <= phys_addr) &&

Просмотреть файл

@ -38,7 +38,7 @@
#include <asm/cacheflush.h>
#include <asm/fixmap.h>
static pgd_t save_pgd __initdata;
static pgd_t *save_pgd __initdata;
static unsigned long efi_flags __initdata;
static void __init early_code_mapping_set_exec(int executable)
@ -61,12 +61,20 @@ static void __init early_code_mapping_set_exec(int executable)
void __init efi_call_phys_prelog(void)
{
unsigned long vaddress;
int pgd;
int n_pgds;
early_code_mapping_set_exec(1);
local_irq_save(efi_flags);
vaddress = (unsigned long)__va(0x0UL);
save_pgd = *pgd_offset_k(0x0UL);
set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress));
n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL);
for (pgd = 0; pgd < n_pgds; pgd++) {
save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
}
__flush_tlb_all();
}
@ -75,7 +83,11 @@ void __init efi_call_phys_epilog(void)
/*
* After the lock is released, the original page table is restored.
*/
set_pgd(pgd_offset_k(0x0UL), save_pgd);
int pgd;
int n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
for (pgd = 0; pgd < n_pgds; pgd++)
set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), save_pgd[pgd]);
kfree(save_pgd);
__flush_tlb_all();
local_irq_restore(efi_flags);
early_code_mapping_set_exec(0);

Просмотреть файл

@ -1034,7 +1034,8 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
* globally purge translation cache of a virtual address or all TLB's
* @cpumask: mask of all cpu's in which the address is to be removed
* @mm: mm_struct containing virtual address range
* @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu)
* @start: start virtual address to be removed from TLB
* @end: end virtual address to be remove from TLB
* @cpu: the current cpu
*
* This is the entry point for initiating any UV global TLB shootdown.
@ -1056,7 +1057,7 @@ static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
*/
const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm, unsigned long start,
unsigned end, unsigned int cpu)
unsigned long end, unsigned int cpu)
{
int locals = 0;
int remotes = 0;
@ -1113,7 +1114,10 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
record_send_statistics(stat, locals, hubs, remotes, bau_desc);
bau_desc->payload.address = start;
if (!end || (end - start) <= PAGE_SIZE)
bau_desc->payload.address = start;
else
bau_desc->payload.address = TLB_FLUSH_ALL;
bau_desc->payload.sending_cpu = cpu;
/*
* uv_flush_send_and_wait returns 0 if all cpu's were messaged,

Просмотреть файл

@ -814,12 +814,14 @@ int main(int argc, char **argv)
read_relocs(fp);
if (show_absolute_syms) {
print_absolute_symbols();
return 0;
goto out;
}
if (show_absolute_relocs) {
print_absolute_relocs();
return 0;
goto out;
}
emit_relocs(as_text, use_real_mode);
out:
fclose(fp);
return 0;
}

Просмотреть файл

@ -250,7 +250,7 @@ acpi_physical_address __init acpi_os_get_root_pointer(void)
return acpi_rsdp;
#endif
if (efi_enabled) {
if (efi_enabled(EFI_CONFIG_TABLES)) {
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)

Просмотреть файл

@ -77,10 +77,15 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x13d3, 0x3393) },
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@ -104,10 +109,15 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

Просмотреть файл

@ -135,10 +135,15 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },

Просмотреть файл

@ -340,7 +340,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
/*
* Alocate and fill the csrow/channels structs
*/
mci->csrows = kcalloc(sizeof(*mci->csrows), tot_csrows, GFP_KERNEL);
mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL);
if (!mci->csrows)
goto error;
for (row = 0; row < tot_csrows; row++) {
@ -351,7 +351,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
csr->csrow_idx = row;
csr->mci = mci;
csr->nr_channels = tot_channels;
csr->channels = kcalloc(sizeof(*csr->channels), tot_channels,
csr->channels = kcalloc(tot_channels, sizeof(*csr->channels),
GFP_KERNEL);
if (!csr->channels)
goto error;
@ -369,7 +369,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
/*
* Allocate and fill the dimm structs
*/
mci->dimms = kcalloc(sizeof(*mci->dimms), tot_dimms, GFP_KERNEL);
mci->dimms = kcalloc(tot_dimms, sizeof(*mci->dimms), GFP_KERNEL);
if (!mci->dimms)
goto error;

Просмотреть файл

@ -256,7 +256,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj,
struct edac_pci_dev_attribute *edac_pci_dev;
edac_pci_dev = (struct edac_pci_dev_attribute *)attr;
if (edac_pci_dev->show)
if (edac_pci_dev->store)
return edac_pci_dev->store(edac_pci_dev->value, buffer, count);
return -EIO;
}

Просмотреть файл

@ -471,7 +471,7 @@ void __init dmi_scan_machine(void)
char __iomem *p, *q;
int rc;
if (efi_enabled) {
if (efi_enabled(EFI_CONFIG_TABLES)) {
if (efi.smbios == EFI_INVALID_TABLE_ADDR)
goto error;

Просмотреть файл

@ -674,7 +674,7 @@ static int efi_status_to_err(efi_status_t status)
err = -EACCES;
break;
case EFI_NOT_FOUND:
err = -ENOENT;
err = -EIO;
break;
default:
err = -EINVAL;
@ -793,6 +793,7 @@ static ssize_t efivarfs_file_write(struct file *file,
spin_unlock(&efivars->lock);
efivar_unregister(var);
drop_nlink(inode);
d_delete(file->f_dentry);
dput(file->f_dentry);
} else {
@ -994,7 +995,7 @@ static int efivarfs_unlink(struct inode *dir, struct dentry *dentry)
list_del(&var->list);
spin_unlock(&efivars->lock);
efivar_unregister(var);
drop_nlink(dir);
drop_nlink(dentry->d_inode);
dput(dentry);
return 0;
}
@ -1782,7 +1783,7 @@ efivars_init(void)
printk(KERN_INFO "EFI Variables Facility v%s %s\n", EFIVARS_VERSION,
EFIVARS_DATE);
if (!efi_enabled)
if (!efi_enabled(EFI_RUNTIME_SERVICES))
return 0;
/* For now we'll register the efi directory at /sys/firmware/efi */
@ -1822,7 +1823,7 @@ err_put:
static void __exit
efivars_exit(void)
{
if (efi_enabled) {
if (efi_enabled(EFI_RUNTIME_SERVICES)) {
unregister_efivars(&__efivars);
kobject_put(efi_kobj);
}

Просмотреть файл

@ -99,7 +99,7 @@ unsigned long __init find_ibft_region(unsigned long *sizep)
/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
* only use ACPI for this */
if (!efi_enabled)
if (!efi_enabled(EFI_BOOT))
find_ibft_in_mem();
if (ibft_addr) {

Просмотреть файл

@ -24,7 +24,7 @@ config DRM_EXYNOS_DMABUF
config DRM_EXYNOS_FIMD
bool "Exynos DRM FIMD"
depends on DRM_EXYNOS && !FB_S3C
depends on DRM_EXYNOS && !FB_S3C && !ARCH_MULTIPLATFORM
help
Choose this option if you want to use Exynos FIMD for DRM.
@ -48,7 +48,7 @@ config DRM_EXYNOS_G2D
config DRM_EXYNOS_IPP
bool "Exynos DRM IPP"
depends on DRM_EXYNOS
depends on DRM_EXYNOS && !ARCH_MULTIPLATFORM
help
Choose this option if you want to use IPP feature for DRM.

Просмотреть файл

@ -18,7 +18,6 @@
#include "exynos_drm_drv.h"
#include "exynos_drm_encoder.h"
#define MAX_EDID 256
#define to_exynos_connector(x) container_of(x, struct exynos_drm_connector,\
drm_connector)
@ -96,7 +95,9 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
to_exynos_connector(connector);
struct exynos_drm_manager *manager = exynos_connector->manager;
struct exynos_drm_display_ops *display_ops = manager->display_ops;
unsigned int count;
struct edid *edid = NULL;
unsigned int count = 0;
int ret;
DRM_DEBUG_KMS("%s\n", __FILE__);
@ -114,27 +115,21 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
* because lcd panel has only one mode.
*/
if (display_ops->get_edid) {
int ret;
void *edid;
edid = kzalloc(MAX_EDID, GFP_KERNEL);
if (!edid) {
DRM_ERROR("failed to allocate edid\n");
return 0;
edid = display_ops->get_edid(manager->dev, connector);
if (IS_ERR_OR_NULL(edid)) {
ret = PTR_ERR(edid);
edid = NULL;
DRM_ERROR("Panel operation get_edid failed %d\n", ret);
goto out;
}
ret = display_ops->get_edid(manager->dev, connector,
edid, MAX_EDID);
if (ret < 0) {
DRM_ERROR("failed to get edid data.\n");
kfree(edid);
edid = NULL;
return 0;
count = drm_add_edid_modes(connector, edid);
if (count < 0) {
DRM_ERROR("Add edid modes failed %d\n", count);
goto out;
}
drm_mode_connector_update_edid_property(connector, edid);
count = drm_add_edid_modes(connector, edid);
kfree(edid);
} else {
struct exynos_drm_panel_info *panel;
struct drm_display_mode *mode = drm_mode_create(connector->dev);
@ -161,6 +156,8 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
count = 1;
}
out:
kfree(edid);
return count;
}

Просмотреть файл

@ -19,6 +19,7 @@
struct exynos_drm_dmabuf_attachment {
struct sg_table sgt;
enum dma_data_direction dir;
bool is_mapped;
};
static int exynos_gem_attach_dma_buf(struct dma_buf *dmabuf,
@ -72,17 +73,10 @@ static struct sg_table *
DRM_DEBUG_PRIME("%s\n", __FILE__);
if (WARN_ON(dir == DMA_NONE))
return ERR_PTR(-EINVAL);
/* just return current sgt if already requested. */
if (exynos_attach->dir == dir)
if (exynos_attach->dir == dir && exynos_attach->is_mapped)
return &exynos_attach->sgt;
/* reattaching is not allowed. */
if (WARN_ON(exynos_attach->dir != DMA_NONE))
return ERR_PTR(-EBUSY);
buf = gem_obj->buffer;
if (!buf) {
DRM_ERROR("buffer is null.\n");
@ -107,13 +101,17 @@ static struct sg_table *
wr = sg_next(wr);
}
nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir);
if (!nents) {
DRM_ERROR("failed to map sgl with iommu.\n");
sgt = ERR_PTR(-EIO);
goto err_unlock;
if (dir != DMA_NONE) {
nents = dma_map_sg(attach->dev, sgt->sgl, sgt->orig_nents, dir);
if (!nents) {
DRM_ERROR("failed to map sgl with iommu.\n");
sg_free_table(sgt);
sgt = ERR_PTR(-EIO);
goto err_unlock;
}
}
exynos_attach->is_mapped = true;
exynos_attach->dir = dir;
attach->priv = exynos_attach;

Просмотреть файл

@ -148,8 +148,8 @@ struct exynos_drm_overlay {
struct exynos_drm_display_ops {
enum exynos_drm_output_type type;
bool (*is_connected)(struct device *dev);
int (*get_edid)(struct device *dev, struct drm_connector *connector,
u8 *edid, int len);
struct edid *(*get_edid)(struct device *dev,
struct drm_connector *connector);
void *(*get_panel)(struct device *dev);
int (*check_timing)(struct device *dev, void *timing);
int (*power_on)(struct device *dev, int mode);

Просмотреть файл

@ -324,7 +324,7 @@ out:
g2d_userptr = NULL;
}
dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
unsigned long userptr,
unsigned long size,
struct drm_file *filp,

Просмотреть файл

@ -108,18 +108,17 @@ static bool drm_hdmi_is_connected(struct device *dev)
return false;
}
static int drm_hdmi_get_edid(struct device *dev,
struct drm_connector *connector, u8 *edid, int len)
static struct edid *drm_hdmi_get_edid(struct device *dev,
struct drm_connector *connector)
{
struct drm_hdmi_context *ctx = to_context(dev);
DRM_DEBUG_KMS("%s\n", __FILE__);
if (hdmi_ops && hdmi_ops->get_edid)
return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector, edid,
len);
return hdmi_ops->get_edid(ctx->hdmi_ctx->ctx, connector);
return 0;
return NULL;
}
static int drm_hdmi_check_timing(struct device *dev, void *timing)

Просмотреть файл

@ -30,8 +30,8 @@ struct exynos_drm_hdmi_context {
struct exynos_hdmi_ops {
/* display */
bool (*is_connected)(void *ctx);
int (*get_edid)(void *ctx, struct drm_connector *connector,
u8 *edid, int len);
struct edid *(*get_edid)(void *ctx,
struct drm_connector *connector);
int (*check_timing)(void *ctx, void *timing);
int (*power_on)(void *ctx, int mode);

Просмотреть файл

@ -869,7 +869,7 @@ static void ipp_put_event(struct drm_exynos_ipp_cmd_node *c_node,
}
}
void ipp_handle_cmd_work(struct device *dev,
static void ipp_handle_cmd_work(struct device *dev,
struct exynos_drm_ippdrv *ippdrv,
struct drm_exynos_ipp_cmd_work *cmd_work,
struct drm_exynos_ipp_cmd_node *c_node)

Просмотреть файл

@ -734,7 +734,7 @@ static int rotator_remove(struct platform_device *pdev)
return 0;
}
struct rot_limit_table rot_limit_tbl = {
static struct rot_limit_table rot_limit_tbl = {
.ycbcr420_2p = {
.min_w = 32,
.min_h = 32,
@ -751,7 +751,7 @@ struct rot_limit_table rot_limit_tbl = {
},
};
struct platform_device_id rotator_driver_ids[] = {
static struct platform_device_id rotator_driver_ids[] = {
{
.name = "exynos-rot",
.driver_data = (unsigned long)&rot_limit_tbl,

Просмотреть файл

@ -98,10 +98,12 @@ static bool vidi_display_is_connected(struct device *dev)
return ctx->connected ? true : false;
}
static int vidi_get_edid(struct device *dev, struct drm_connector *connector,
u8 *edid, int len)
static struct edid *vidi_get_edid(struct device *dev,
struct drm_connector *connector)
{
struct vidi_context *ctx = get_vidi_context(dev);
struct edid *edid;
int edid_len;
DRM_DEBUG_KMS("%s\n", __FILE__);
@ -111,13 +113,18 @@ static int vidi_get_edid(struct device *dev, struct drm_connector *connector,
*/
if (!ctx->raw_edid) {
DRM_DEBUG_KMS("raw_edid is null.\n");
return -EFAULT;
return ERR_PTR(-EFAULT);
}
memcpy(edid, ctx->raw_edid, min((1 + ctx->raw_edid->extensions)
* EDID_LENGTH, len));
edid_len = (1 + ctx->raw_edid->extensions) * EDID_LENGTH;
edid = kzalloc(edid_len, GFP_KERNEL);
if (!edid) {
DRM_DEBUG_KMS("failed to allocate edid\n");
return ERR_PTR(-ENOMEM);
}
return 0;
memcpy(edid, ctx->raw_edid, edid_len);
return edid;
}
static void *vidi_get_panel(struct device *dev)
@ -514,7 +521,6 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data,
struct exynos_drm_manager *manager;
struct exynos_drm_display_ops *display_ops;
struct drm_exynos_vidi_connection *vidi = data;
struct edid *raw_edid;
int edid_len;
DRM_DEBUG_KMS("%s\n", __FILE__);
@ -551,11 +557,11 @@ int vidi_connection_ioctl(struct drm_device *drm_dev, void *data,
}
if (vidi->connection) {
if (!vidi->edid) {
DRM_DEBUG_KMS("edid data is null.\n");
struct edid *raw_edid = (struct edid *)(uint32_t)vidi->edid;
if (!drm_edid_is_valid(raw_edid)) {
DRM_DEBUG_KMS("edid data is invalid.\n");
return -EINVAL;
}
raw_edid = (struct edid *)(uint32_t)vidi->edid;
edid_len = (1 + raw_edid->extensions) * EDID_LENGTH;
ctx->raw_edid = kzalloc(edid_len, GFP_KERNEL);
if (!ctx->raw_edid) {

Просмотреть файл

@ -34,7 +34,6 @@
#include <linux/regulator/consumer.h>
#include <linux/io.h>
#include <linux/of_gpio.h>
#include <plat/gpio-cfg.h>
#include <drm/exynos_drm.h>
@ -98,8 +97,7 @@ struct hdmi_context {
void __iomem *regs;
void *parent_ctx;
int external_irq;
int internal_irq;
int irq;
struct i2c_client *ddc_port;
struct i2c_client *hdmiphy_port;
@ -1391,8 +1389,7 @@ static bool hdmi_is_connected(void *ctx)
return hdata->hpd;
}
static int hdmi_get_edid(void *ctx, struct drm_connector *connector,
u8 *edid, int len)
static struct edid *hdmi_get_edid(void *ctx, struct drm_connector *connector)
{
struct edid *raw_edid;
struct hdmi_context *hdata = ctx;
@ -1400,22 +1397,18 @@ static int hdmi_get_edid(void *ctx, struct drm_connector *connector,
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
if (!hdata->ddc_port)
return -ENODEV;
return ERR_PTR(-ENODEV);
raw_edid = drm_get_edid(connector, hdata->ddc_port->adapter);
if (raw_edid) {
hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid);
memcpy(edid, raw_edid, min((1 + raw_edid->extensions)
* EDID_LENGTH, len));
DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n",
(hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"),
raw_edid->width_cm, raw_edid->height_cm);
kfree(raw_edid);
} else {
return -ENODEV;
}
if (!raw_edid)
return ERR_PTR(-ENODEV);
return 0;
hdata->dvi_mode = !drm_detect_hdmi_monitor(raw_edid);
DRM_DEBUG_KMS("%s : width[%d] x height[%d]\n",
(hdata->dvi_mode ? "dvi monitor" : "hdmi monitor"),
raw_edid->width_cm, raw_edid->height_cm);
return raw_edid;
}
static int hdmi_v13_check_timing(struct fb_videomode *check_timing)
@ -1652,16 +1645,16 @@ static void hdmi_conf_reset(struct hdmi_context *hdata)
/* resetting HDMI core */
hdmi_reg_writemask(hdata, reg, 0, HDMI_CORE_SW_RSTOUT);
mdelay(10);
usleep_range(10000, 12000);
hdmi_reg_writemask(hdata, reg, ~0, HDMI_CORE_SW_RSTOUT);
mdelay(10);
usleep_range(10000, 12000);
}
static void hdmi_conf_init(struct hdmi_context *hdata)
{
struct hdmi_infoframe infoframe;
/* disable HPD interrupts */
/* disable HPD interrupts from HDMI IP block, use GPIO instead */
hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
HDMI_INTC_EN_HPD_PLUG | HDMI_INTC_EN_HPD_UNPLUG);
@ -1779,7 +1772,7 @@ static void hdmi_v13_timing_apply(struct hdmi_context *hdata)
u32 val = hdmi_reg_read(hdata, HDMI_V13_PHY_STATUS);
if (val & HDMI_PHY_STATUS_READY)
break;
mdelay(1);
usleep_range(1000, 2000);
}
/* steady state not achieved */
if (tries == 0) {
@ -1946,7 +1939,7 @@ static void hdmi_v14_timing_apply(struct hdmi_context *hdata)
u32 val = hdmi_reg_read(hdata, HDMI_PHY_STATUS_0);
if (val & HDMI_PHY_STATUS_READY)
break;
mdelay(1);
usleep_range(1000, 2000);
}
/* steady state not achieved */
if (tries == 0) {
@ -1998,9 +1991,9 @@ static void hdmiphy_conf_reset(struct hdmi_context *hdata)
/* reset hdmiphy */
hdmi_reg_writemask(hdata, reg, ~0, HDMI_PHY_SW_RSTOUT);
mdelay(10);
usleep_range(10000, 12000);
hdmi_reg_writemask(hdata, reg, 0, HDMI_PHY_SW_RSTOUT);
mdelay(10);
usleep_range(10000, 12000);
}
static void hdmiphy_poweron(struct hdmi_context *hdata)
@ -2048,7 +2041,7 @@ static void hdmiphy_conf_apply(struct hdmi_context *hdata)
return;
}
mdelay(10);
usleep_range(10000, 12000);
/* operation mode */
operation[0] = 0x1f;
@ -2170,6 +2163,13 @@ static void hdmi_commit(void *ctx)
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
mutex_lock(&hdata->hdmi_mutex);
if (!hdata->powered) {
mutex_unlock(&hdata->hdmi_mutex);
return;
}
mutex_unlock(&hdata->hdmi_mutex);
hdmi_conf_apply(hdata);
}
@ -2265,7 +2265,7 @@ static struct exynos_hdmi_ops hdmi_ops = {
.dpms = hdmi_dpms,
};
static irqreturn_t hdmi_external_irq_thread(int irq, void *arg)
static irqreturn_t hdmi_irq_thread(int irq, void *arg)
{
struct exynos_drm_hdmi_context *ctx = arg;
struct hdmi_context *hdata = ctx->ctx;
@ -2280,31 +2280,6 @@ static irqreturn_t hdmi_external_irq_thread(int irq, void *arg)
return IRQ_HANDLED;
}
static irqreturn_t hdmi_internal_irq_thread(int irq, void *arg)
{
struct exynos_drm_hdmi_context *ctx = arg;
struct hdmi_context *hdata = ctx->ctx;
u32 intc_flag;
intc_flag = hdmi_reg_read(hdata, HDMI_INTC_FLAG);
/* clearing flags for HPD plug/unplug */
if (intc_flag & HDMI_INTC_FLAG_HPD_UNPLUG) {
DRM_DEBUG_KMS("unplugged\n");
hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0,
HDMI_INTC_FLAG_HPD_UNPLUG);
}
if (intc_flag & HDMI_INTC_FLAG_HPD_PLUG) {
DRM_DEBUG_KMS("plugged\n");
hdmi_reg_writemask(hdata, HDMI_INTC_FLAG, ~0,
HDMI_INTC_FLAG_HPD_PLUG);
}
if (ctx->drm_dev)
drm_helper_hpd_irq_event(ctx->drm_dev);
return IRQ_HANDLED;
}
static int hdmi_resources_init(struct hdmi_context *hdata)
{
struct device *dev = hdata->dev;
@ -2555,39 +2530,24 @@ static int hdmi_probe(struct platform_device *pdev)
hdata->hdmiphy_port = hdmi_hdmiphy;
hdata->external_irq = gpio_to_irq(hdata->hpd_gpio);
if (hdata->external_irq < 0) {
DRM_ERROR("failed to get GPIO external irq\n");
ret = hdata->external_irq;
goto err_hdmiphy;
}
hdata->internal_irq = platform_get_irq(pdev, 0);
if (hdata->internal_irq < 0) {
DRM_ERROR("failed to get platform internal irq\n");
ret = hdata->internal_irq;
hdata->irq = gpio_to_irq(hdata->hpd_gpio);
if (hdata->irq < 0) {
DRM_ERROR("failed to get GPIO irq\n");
ret = hdata->irq;
goto err_hdmiphy;
}
hdata->hpd = gpio_get_value(hdata->hpd_gpio);
ret = request_threaded_irq(hdata->external_irq, NULL,
hdmi_external_irq_thread, IRQF_TRIGGER_RISING |
ret = request_threaded_irq(hdata->irq, NULL,
hdmi_irq_thread, IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"hdmi_external", drm_hdmi_ctx);
"hdmi", drm_hdmi_ctx);
if (ret) {
DRM_ERROR("failed to register hdmi external interrupt\n");
DRM_ERROR("failed to register hdmi interrupt\n");
goto err_hdmiphy;
}
ret = request_threaded_irq(hdata->internal_irq, NULL,
hdmi_internal_irq_thread, IRQF_ONESHOT,
"hdmi_internal", drm_hdmi_ctx);
if (ret) {
DRM_ERROR("failed to register hdmi internal interrupt\n");
goto err_free_irq;
}
/* Attach HDMI Driver to common hdmi. */
exynos_hdmi_drv_attach(drm_hdmi_ctx);
@ -2598,8 +2558,6 @@ static int hdmi_probe(struct platform_device *pdev)
return 0;
err_free_irq:
free_irq(hdata->external_irq, drm_hdmi_ctx);
err_hdmiphy:
i2c_del_driver(&hdmiphy_driver);
err_ddc:
@ -2617,8 +2575,7 @@ static int hdmi_remove(struct platform_device *pdev)
pm_runtime_disable(dev);
free_irq(hdata->internal_irq, hdata);
free_irq(hdata->external_irq, hdata);
free_irq(hdata->irq, hdata);
/* hdmiphy i2c driver */
@ -2637,8 +2594,7 @@ static int hdmi_suspend(struct device *dev)
DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__);
disable_irq(hdata->internal_irq);
disable_irq(hdata->external_irq);
disable_irq(hdata->irq);
hdata->hpd = false;
if (ctx->drm_dev)
@ -2663,8 +2619,7 @@ static int hdmi_resume(struct device *dev)
hdata->hpd = gpio_get_value(hdata->hpd_gpio);
enable_irq(hdata->external_irq);
enable_irq(hdata->internal_irq);
enable_irq(hdata->irq);
if (!pm_runtime_suspended(dev)) {
DRM_DEBUG_KMS("%s : Already resumed\n", __func__);

Просмотреть файл

@ -600,7 +600,7 @@ static void vp_win_reset(struct mixer_context *ctx)
/* waiting until VP_SRESET_PROCESSING is 0 */
if (~vp_reg_read(res, VP_SRESET) & VP_SRESET_PROCESSING)
break;
mdelay(10);
usleep_range(10000, 12000);
}
WARN(tries == 0, "failed to reset Video Processor\n");
}
@ -776,6 +776,13 @@ static void mixer_win_commit(void *ctx, int win)
DRM_DEBUG_KMS("[%d] %s, win: %d\n", __LINE__, __func__, win);
mutex_lock(&mixer_ctx->mixer_mutex);
if (!mixer_ctx->powered) {
mutex_unlock(&mixer_ctx->mixer_mutex);
return;
}
mutex_unlock(&mixer_ctx->mixer_mutex);
if (win > 1 && mixer_ctx->vp_enabled)
vp_video_buffer(mixer_ctx, win);
else

Просмотреть файл

@ -30,6 +30,7 @@
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <generated/utsrelease.h>
#include <drm/drmP.h>
#include "intel_drv.h"
#include "intel_ringbuffer.h"
@ -690,6 +691,7 @@ static int i915_error_state(struct seq_file *m, void *unused)
seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
error->time.tv_usec);
seq_printf(m, "Kernel: " UTS_RELEASE);
seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, "IER: 0x%08x\n", error->ier);

Просмотреть файл

@ -533,6 +533,7 @@
#define MI_MODE 0x0209c
# define VS_TIMER_DISPATCH (1 << 6)
# define MI_FLUSH_ENABLE (1 << 12)
# define ASYNC_FLIP_PERF_DISABLE (1 << 14)
#define GEN6_GT_MODE 0x20d0
#define GEN6_GT_MODE_HI (1 << 9)

Просмотреть файл

@ -505,13 +505,25 @@ static int init_render_ring(struct intel_ring_buffer *ring)
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = init_ring_common(ring);
if (INTEL_INFO(dev)->gen > 3) {
if (INTEL_INFO(dev)->gen > 3)
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH));
if (IS_GEN7(dev))
I915_WRITE(GFX_MODE_GEN7,
_MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
_MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
}
/* We need to disable the AsyncFlip performance optimisations in order
* to use MI_WAIT_FOR_EVENT within the CS. It should already be
* programmed to '1' on all products.
*/
if (INTEL_INFO(dev)->gen >= 6)
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE));
/* Required for the hardware to program scanline values for waiting */
if (INTEL_INFO(dev)->gen == 6)
I915_WRITE(GFX_MODE,
_MASKED_BIT_ENABLE(GFX_TLB_INVALIDATE_ALWAYS));
if (IS_GEN7(dev))
I915_WRITE(GFX_MODE_GEN7,
_MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
_MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
if (INTEL_INFO(dev)->gen >= 5) {
ret = init_pipe_control(ring);

Просмотреть файл

@ -1216,7 +1216,7 @@ void cayman_dma_stop(struct radeon_device *rdev)
int cayman_dma_resume(struct radeon_device *rdev)
{
struct radeon_ring *ring;
u32 rb_cntl, dma_cntl;
u32 rb_cntl, dma_cntl, ib_cntl;
u32 rb_bufsz;
u32 reg_offset, wb_offset;
int i, r;
@ -1265,7 +1265,11 @@ int cayman_dma_resume(struct radeon_device *rdev)
WREG32(DMA_RB_BASE + reg_offset, ring->gpu_addr >> 8);
/* enable DMA IBs */
WREG32(DMA_IB_CNTL + reg_offset, DMA_IB_ENABLE | CMD_VMID_FORCE);
ib_cntl = DMA_IB_ENABLE | CMD_VMID_FORCE;
#ifdef __BIG_ENDIAN
ib_cntl |= DMA_IB_SWAP_ENABLE;
#endif
WREG32(DMA_IB_CNTL + reg_offset, ib_cntl);
dma_cntl = RREG32(DMA_CNTL + reg_offset);
dma_cntl &= ~CTXEMPTY_INT_ENABLE;

Просмотреть файл

@ -2313,7 +2313,7 @@ void r600_dma_stop(struct radeon_device *rdev)
int r600_dma_resume(struct radeon_device *rdev)
{
struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_DMA_INDEX];
u32 rb_cntl, dma_cntl;
u32 rb_cntl, dma_cntl, ib_cntl;
u32 rb_bufsz;
int r;
@ -2353,7 +2353,11 @@ int r600_dma_resume(struct radeon_device *rdev)
WREG32(DMA_RB_BASE, ring->gpu_addr >> 8);
/* enable DMA IBs */
WREG32(DMA_IB_CNTL, DMA_IB_ENABLE);
ib_cntl = DMA_IB_ENABLE;
#ifdef __BIG_ENDIAN
ib_cntl |= DMA_IB_SWAP_ENABLE;
#endif
WREG32(DMA_IB_CNTL, ib_cntl);
dma_cntl = RREG32(DMA_CNTL);
dma_cntl &= ~CTXEMPTY_INT_ENABLE;

Просмотреть файл

@ -286,6 +286,8 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
p->chunks[p->chunk_ib_idx].kpage[1] == NULL) {
kfree(p->chunks[p->chunk_ib_idx].kpage[0]);
kfree(p->chunks[p->chunk_ib_idx].kpage[1]);
p->chunks[p->chunk_ib_idx].kpage[0] = NULL;
p->chunks[p->chunk_ib_idx].kpage[1] = NULL;
return -ENOMEM;
}
}

Просмотреть файл

@ -241,7 +241,8 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
y = 0;
}
if (ASIC_IS_AVIVO(rdev)) {
/* fixed on DCE6 and newer */
if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE6(rdev)) {
int i = 0;
struct drm_crtc *crtc_p;

Просмотреть файл

@ -429,7 +429,8 @@ bool radeon_card_posted(struct radeon_device *rdev)
{
uint32_t reg;
if (efi_enabled && rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE)
if (efi_enabled(EFI_BOOT) &&
rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE)
return false;
/* first check CRTCs */

Просмотреть файл

@ -1122,7 +1122,7 @@ radeon_user_framebuffer_create(struct drm_device *dev,
if (ret) {
kfree(radeon_fb);
drm_gem_object_unreference_unlocked(obj);
return NULL;
return ERR_PTR(ret);
}
return &radeon_fb->base;

Просмотреть файл

@ -306,6 +306,9 @@
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
#define USB_VENDOR_ID_FORMOSA 0x147a
#define USB_DEVICE_ID_FORMOSA_IR_RECEIVER 0xe03e
#define USB_VENDOR_ID_FREESCALE 0x15A2
#define USB_DEVICE_ID_FREESCALE_MX28 0x004F

Просмотреть файл

@ -540,13 +540,24 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
{
struct i2c_client *client = hid->driver_data;
int report_id = buf[0];
int ret;
if (report_type == HID_INPUT_REPORT)
return -EINVAL;
return i2c_hid_set_report(client,
if (report_id) {
buf++;
count--;
}
ret = i2c_hid_set_report(client,
report_type == HID_FEATURE_REPORT ? 0x03 : 0x02,
report_id, buf, count);
if (report_id && ret >= 0)
ret++; /* add report_id to the number of transfered bytes */
return ret;
}
static int i2c_hid_parse(struct hid_device *hid)

Просмотреть файл

@ -70,6 +70,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },

Просмотреть файл

@ -974,6 +974,38 @@ static void __init free_iommu_all(void)
}
}
/*
* Family15h Model 10h-1fh erratum 746 (IOMMU Logging May Stall Translations)
* Workaround:
* BIOS should disable L2B micellaneous clock gating by setting
* L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b
*/
static void __init amd_iommu_erratum_746_workaround(struct amd_iommu *iommu)
{
u32 value;
if ((boot_cpu_data.x86 != 0x15) ||
(boot_cpu_data.x86_model < 0x10) ||
(boot_cpu_data.x86_model > 0x1f))
return;
pci_write_config_dword(iommu->dev, 0xf0, 0x90);
pci_read_config_dword(iommu->dev, 0xf4, &value);
if (value & BIT(2))
return;
/* Select NB indirect register 0x90 and enable writing */
pci_write_config_dword(iommu->dev, 0xf0, 0x90 | (1 << 8));
pci_write_config_dword(iommu->dev, 0xf4, value | 0x4);
pr_info("AMD-Vi: Applying erratum 746 workaround for IOMMU at %s\n",
dev_name(&iommu->dev->dev));
/* Clear the enable writing bit */
pci_write_config_dword(iommu->dev, 0xf0, 0x90);
}
/*
* This function clues the initialization function for one IOMMU
* together and also allocates the command buffer and programs the
@ -1172,6 +1204,8 @@ static int iommu_init_pci(struct amd_iommu *iommu)
iommu->stored_l2[i] = iommu_read_l2(iommu, i);
}
amd_iommu_erratum_746_workaround(iommu);
return pci_enable_device(iommu->dev);
}

Просмотреть файл

@ -4234,6 +4234,21 @@ static struct iommu_ops intel_iommu_ops = {
.pgsize_bitmap = INTEL_IOMMU_PGSIZES,
};
static void quirk_iommu_g4x_gfx(struct pci_dev *dev)
{
/* G4x/GM45 integrated gfx dmar support is totally busted. */
printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
dmar_map_gfx = 0;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_g4x_gfx);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_g4x_gfx);
static void quirk_iommu_rwbf(struct pci_dev *dev)
{
/*
@ -4242,12 +4257,6 @@ static void quirk_iommu_rwbf(struct pci_dev *dev)
*/
printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
/* https://bugzilla.redhat.com/show_bug.cgi?id=538163 */
if (dev->revision == 0x07) {
printk(KERN_INFO "DMAR: Disabling IOMMU for graphics on this chipset\n");
dmar_map_gfx = 0;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);

Просмотреть файл

@ -248,6 +248,8 @@ static inline void dump_rawmsg(enum debuglevel level, const char *tag,
CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l,
CAPIMSG_CONTROL(data));
l -= 12;
if (l <= 0)
return;
dbgline = kmalloc(3 * l, GFP_ATOMIC);
if (!dbgline)
return;

Просмотреть файл

@ -340,24 +340,22 @@ static int validate_region_size(struct raid_set *rs, unsigned long region_size)
}
/*
* validate_rebuild_devices
* validate_raid_redundancy
* @rs
*
* Determine if the devices specified for rebuild can result in a valid
* usable array that is capable of rebuilding the given devices.
* Determine if there are enough devices in the array that haven't
* failed (or are being rebuilt) to form a usable array.
*
* Returns: 0 on success, -EINVAL on failure.
*/
static int validate_rebuild_devices(struct raid_set *rs)
static int validate_raid_redundancy(struct raid_set *rs)
{
unsigned i, rebuild_cnt = 0;
unsigned rebuilds_per_group, copies, d;
if (!(rs->print_flags & DMPF_REBUILD))
return 0;
for (i = 0; i < rs->md.raid_disks; i++)
if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
if (!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
!rs->dev[i].rdev.sb_page)
rebuild_cnt++;
switch (rs->raid_type->level) {
@ -393,27 +391,24 @@ static int validate_rebuild_devices(struct raid_set *rs)
* A A B B C
* C D D E E
*/
rebuilds_per_group = 0;
for (i = 0; i < rs->md.raid_disks * copies; i++) {
if (!(i % copies))
rebuilds_per_group = 0;
d = i % rs->md.raid_disks;
if (!test_bit(In_sync, &rs->dev[d].rdev.flags) &&
if ((!rs->dev[d].rdev.sb_page ||
!test_bit(In_sync, &rs->dev[d].rdev.flags)) &&
(++rebuilds_per_group >= copies))
goto too_many;
if (!((i + 1) % copies))
rebuilds_per_group = 0;
}
break;
default:
DMERR("The rebuild parameter is not supported for %s",
rs->raid_type->name);
rs->ti->error = "Rebuild not supported for this RAID type";
return -EINVAL;
if (rebuild_cnt)
return -EINVAL;
}
return 0;
too_many:
rs->ti->error = "Too many rebuild devices specified";
return -EINVAL;
}
@ -664,9 +659,6 @@ static int parse_raid_params(struct raid_set *rs, char **argv,
}
rs->md.dev_sectors = sectors_per_dev;
if (validate_rebuild_devices(rs))
return -EINVAL;
/* Assume there are no metadata devices until the drives are parsed */
rs->md.persistent = 0;
rs->md.external = 1;
@ -995,28 +987,10 @@ static int super_validate(struct mddev *mddev, struct md_rdev *rdev)
static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
{
int ret;
unsigned redundancy = 0;
struct raid_dev *dev;
struct md_rdev *rdev, *tmp, *freshest;
struct mddev *mddev = &rs->md;
switch (rs->raid_type->level) {
case 1:
redundancy = rs->md.raid_disks - 1;
break;
case 4:
case 5:
case 6:
redundancy = rs->raid_type->parity_devs;
break;
case 10:
redundancy = raid10_md_layout_to_copies(mddev->layout) - 1;
break;
default:
ti->error = "Unknown RAID type";
return -EINVAL;
}
freshest = NULL;
rdev_for_each_safe(rdev, tmp, mddev) {
/*
@ -1045,44 +1019,43 @@ static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs)
break;
default:
dev = container_of(rdev, struct raid_dev, rdev);
if (redundancy--) {
if (dev->meta_dev)
dm_put_device(ti, dev->meta_dev);
if (dev->meta_dev)
dm_put_device(ti, dev->meta_dev);
dev->meta_dev = NULL;
rdev->meta_bdev = NULL;
dev->meta_dev = NULL;
rdev->meta_bdev = NULL;
if (rdev->sb_page)
put_page(rdev->sb_page);
if (rdev->sb_page)
put_page(rdev->sb_page);
rdev->sb_page = NULL;
rdev->sb_page = NULL;
rdev->sb_loaded = 0;
rdev->sb_loaded = 0;
/*
* We might be able to salvage the data device
* even though the meta device has failed. For
* now, we behave as though '- -' had been
* set for this device in the table.
*/
if (dev->data_dev)
dm_put_device(ti, dev->data_dev);
/*
* We might be able to salvage the data device
* even though the meta device has failed. For
* now, we behave as though '- -' had been
* set for this device in the table.
*/
if (dev->data_dev)
dm_put_device(ti, dev->data_dev);
dev->data_dev = NULL;
rdev->bdev = NULL;
dev->data_dev = NULL;
rdev->bdev = NULL;
list_del(&rdev->same_set);
continue;
}
ti->error = "Failed to load superblock";
return ret;
list_del(&rdev->same_set);
}
}
if (!freshest)
return 0;
if (validate_raid_redundancy(rs)) {
rs->ti->error = "Insufficient redundancy to activate array";
return -EINVAL;
}
/*
* Validation of the freshest device provides the source of
* validation for the remaining devices.
@ -1432,7 +1405,7 @@ static void raid_resume(struct dm_target *ti)
static struct target_type raid_target = {
.name = "raid",
.version = {1, 4, 0},
.version = {1, 4, 1},
.module = THIS_MODULE,
.ctr = raid_ctr,
.dtr = raid_dtr,

Просмотреть файл

@ -2746,19 +2746,9 @@ static int thin_iterate_devices(struct dm_target *ti,
return 0;
}
/*
* A thin device always inherits its queue limits from its pool.
*/
static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits)
{
struct thin_c *tc = ti->private;
*limits = bdev_get_queue(tc->pool_dev->bdev)->limits;
}
static struct target_type thin_target = {
.name = "thin",
.version = {1, 6, 0},
.version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = thin_ctr,
.dtr = thin_dtr,
@ -2767,7 +2757,6 @@ static struct target_type thin_target = {
.postsuspend = thin_postsuspend,
.status = thin_status,
.iterate_devices = thin_iterate_devices,
.io_hints = thin_io_hints,
};
/*----------------------------------------------------------------*/

Просмотреть файл

@ -1188,6 +1188,7 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
{
struct dm_target *ti;
sector_t len;
unsigned num_requests;
do {
ti = dm_table_find_target(ci->map, ci->sector);
@ -1200,7 +1201,8 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
* reconfiguration might also have changed that since the
* check was performed.
*/
if (!get_num_requests || !get_num_requests(ti))
num_requests = get_num_requests ? get_num_requests(ti) : 0;
if (!num_requests)
return -EOPNOTSUPP;
if (is_split_required && !is_split_required(ti))
@ -1208,7 +1210,7 @@ static int __clone_and_map_changing_extent_only(struct clone_info *ci,
else
len = min(ci->sector_count, max_io_len(ci->sector, ti));
__issue_target_requests(ci, ti, ti->num_discard_requests, len);
__issue_target_requests(ci, ti, num_requests, len);
ci->sector += len;
} while (ci->sector_count -= len);

Просмотреть файл

@ -237,6 +237,7 @@ config MFD_TPS65910
depends on I2C=y && GPIOLIB
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
select IRQ_DOMAIN
help
if you say yes here you get support for the TPS65910 series of

Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/ab8500.h>
#include <linux/of.h>

Просмотреть файл

@ -239,7 +239,12 @@ static int arizona_runtime_resume(struct device *dev)
return ret;
}
regcache_sync(arizona->regmap);
ret = regcache_sync(arizona->regmap);
if (ret != 0) {
dev_err(arizona->dev, "Failed to restore register cache\n");
regulator_disable(arizona->dcvdd);
return ret;
}
return 0;
}

Просмотреть файл

@ -176,14 +176,7 @@ int arizona_irq_init(struct arizona *arizona)
aod = &wm5102_aod;
irq = &wm5102_irq;
switch (arizona->rev) {
case 0:
case 1:
ctrlif_error = false;
break;
default:
break;
}
ctrlif_error = false;
break;
#endif
#ifdef CONFIG_MFD_WM5110
@ -191,14 +184,7 @@ int arizona_irq_init(struct arizona *arizona)
aod = &wm5110_aod;
irq = &wm5110_irq;
switch (arizona->rev) {
case 0:
case 1:
ctrlif_error = false;
break;
default:
break;
}
ctrlif_error = false;
break;
#endif
default:

Просмотреть файл

@ -27,6 +27,66 @@
#include <linux/of_device.h>
#endif
/* I2C safe register check */
static inline bool i2c_safe_reg(unsigned char reg)
{
switch (reg) {
case DA9052_STATUS_A_REG:
case DA9052_STATUS_B_REG:
case DA9052_STATUS_C_REG:
case DA9052_STATUS_D_REG:
case DA9052_ADC_RES_L_REG:
case DA9052_ADC_RES_H_REG:
case DA9052_VDD_RES_REG:
case DA9052_ICHG_AV_REG:
case DA9052_TBAT_RES_REG:
case DA9052_ADCIN4_RES_REG:
case DA9052_ADCIN5_RES_REG:
case DA9052_ADCIN6_RES_REG:
case DA9052_TJUNC_RES_REG:
case DA9052_TSI_X_MSB_REG:
case DA9052_TSI_Y_MSB_REG:
case DA9052_TSI_LSB_REG:
case DA9052_TSI_Z_MSB_REG:
return true;
default:
return false;
}
}
/*
* There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
* gets lockup up or fails to respond following a system reset.
* This fix is to follow any read or write with a dummy read to a safe
* register.
*/
int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
{
int val;
switch (da9052->chip_id) {
case DA9052:
case DA9053_AA:
case DA9053_BA:
case DA9053_BB:
/* A dummy read to a safe register address. */
if (!i2c_safe_reg(reg))
return regmap_read(da9052->regmap,
DA9052_PARK_REGISTER,
&val);
break;
default:
/*
* For other chips parking of I2C register
* to a safe place is not required.
*/
break;
}
return 0;
}
EXPORT_SYMBOL(da9052_i2c_fix);
static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
{
int reg_val, ret;
@ -83,6 +143,7 @@ static int da9052_i2c_probe(struct i2c_client *client,
da9052->dev = &client->dev;
da9052->chip_irq = client->irq;
da9052->fix_io = da9052_i2c_fix;
i2c_set_clientdata(client, da9052);

Просмотреть файл

@ -2524,7 +2524,7 @@ static bool read_mailbox_0(void)
for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
if (ev & prcmu_irq_bit[n])
generic_handle_irq(IRQ_PRCMU_BASE + n);
generic_handle_irq(irq_find_mapping(db8500_irq_domain, n));
}
r = true;
break;
@ -2737,13 +2737,14 @@ static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
}
static struct irq_domain_ops db8500_irq_ops = {
.map = db8500_irq_map,
.xlate = irq_domain_xlate_twocell,
.map = db8500_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static int db8500_irq_init(struct device_node *np)
{
int irq_base = -1;
int irq_base = 0;
int i;
/* In the device tree case, just take some IRQs */
if (!np)
@ -2758,6 +2759,10 @@ static int db8500_irq_init(struct device_node *np)
return -ENOSYS;
}
/* All wakeups will be used, so create mappings for all */
for (i = 0; i < NUM_PRCMU_WAKEUPS; i++)
irq_create_mapping(db8500_irq_domain, i);
return 0;
}

Просмотреть файл

@ -93,15 +93,6 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
if (max77686 == NULL)
return -ENOMEM;
max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
if (IS_ERR(max77686->regmap)) {
ret = PTR_ERR(max77686->regmap);
dev_err(max77686->dev, "Failed to allocate register map: %d\n",
ret);
kfree(max77686);
return ret;
}
i2c_set_clientdata(i2c, max77686);
max77686->dev = &i2c->dev;
max77686->i2c = i2c;
@ -111,6 +102,15 @@ static int max77686_i2c_probe(struct i2c_client *i2c,
max77686->irq_gpio = pdata->irq_gpio;
max77686->irq = i2c->irq;
max77686->regmap = regmap_init_i2c(i2c, &max77686_regmap_config);
if (IS_ERR(max77686->regmap)) {
ret = PTR_ERR(max77686->regmap);
dev_err(max77686->dev, "Failed to allocate register map: %d\n",
ret);
kfree(max77686);
return ret;
}
if (regmap_read(max77686->regmap,
MAX77686_REG_DEVICE_ID, &data) < 0) {
dev_err(max77686->dev,

Просмотреть файл

@ -114,35 +114,37 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
u8 reg_data;
int ret = 0;
if (!pdata) {
dev_err(&i2c->dev, "No platform data found.\n");
return -EINVAL;
}
max77693 = devm_kzalloc(&i2c->dev,
sizeof(struct max77693_dev), GFP_KERNEL);
if (max77693 == NULL)
return -ENOMEM;
max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config);
if (IS_ERR(max77693->regmap)) {
ret = PTR_ERR(max77693->regmap);
dev_err(max77693->dev,"failed to allocate register map: %d\n",
ret);
goto err_regmap;
}
i2c_set_clientdata(i2c, max77693);
max77693->dev = &i2c->dev;
max77693->i2c = i2c;
max77693->irq = i2c->irq;
max77693->type = id->driver_data;
if (!pdata)
goto err_regmap;
max77693->regmap = devm_regmap_init_i2c(i2c, &max77693_regmap_config);
if (IS_ERR(max77693->regmap)) {
ret = PTR_ERR(max77693->regmap);
dev_err(max77693->dev, "failed to allocate register map: %d\n",
ret);
return ret;
}
max77693->wakeup = pdata->wakeup;
if (max77693_read_reg(max77693->regmap,
MAX77693_PMIC_REG_PMIC_ID2, &reg_data) < 0) {
ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
&reg_data);
if (ret < 0) {
dev_err(max77693->dev, "device not found on this channel\n");
ret = -ENODEV;
goto err_regmap;
return ret;
} else
dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
@ -163,7 +165,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
"failed to allocate register map: %d\n", ret);
goto err_regmap;
goto err_regmap_muic;
}
ret = max77693_irq_init(max77693);
@ -184,9 +186,9 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
err_mfd:
max77693_irq_exit(max77693);
err_irq:
err_regmap_muic:
i2c_unregister_device(max77693->muic);
i2c_unregister_device(max77693->haptic);
err_regmap:
return ret;
}

Просмотреть файл

@ -208,6 +208,8 @@ static int pcf50633_probe(struct i2c_client *client,
if (!pcf)
return -ENOMEM;
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
pcf->pdata = pdata;
mutex_init(&pcf->lock);
@ -219,9 +221,6 @@ static int pcf50633_probe(struct i2c_client *client,
return ret;
}
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
version = pcf50633_reg_read(pcf, 0);
variant = pcf50633_reg_read(pcf, 1);
if (version < 0 || variant < 0) {

Просмотреть файл

@ -112,6 +112,21 @@ static int rtl8411_card_power_off(struct rtsx_pcr *pcr, int card)
BPP_LDO_POWB, BPP_LDO_SUSPEND);
}
static int rtl8411_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
{
u8 mask, val;
mask = (BPP_REG_TUNED18 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_MASK;
if (voltage == OUTPUT_3V3)
val = (BPP_ASIC_3V3 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_3V3;
else if (voltage == OUTPUT_1V8)
val = (BPP_ASIC_1V8 << BPP_TUNED18_SHIFT_8411) | BPP_PAD_1V8;
else
return -EINVAL;
return rtsx_pci_write_register(pcr, LDO_CTL, mask, val);
}
static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
{
unsigned int card_exist;
@ -163,6 +178,18 @@ static unsigned int rtl8411_cd_deglitch(struct rtsx_pcr *pcr)
return card_exist;
}
static int rtl8411_conv_clk_and_div_n(int input, int dir)
{
int output;
if (dir == CLK_TO_DIV_N)
output = input * 4 / 5 - 2;
else
output = (input + 2) * 5 / 4;
return output;
}
static const struct pcr_ops rtl8411_pcr_ops = {
.extra_init_hw = rtl8411_extra_init_hw,
.optimize_phy = NULL,
@ -172,7 +199,9 @@ static const struct pcr_ops rtl8411_pcr_ops = {
.disable_auto_blink = rtl8411_disable_auto_blink,
.card_power_on = rtl8411_card_power_on,
.card_power_off = rtl8411_card_power_off,
.switch_output_voltage = rtl8411_switch_output_voltage,
.cd_deglitch = rtl8411_cd_deglitch,
.conv_clk_and_div_n = rtl8411_conv_clk_and_div_n,
};
/* SD Pull Control Enable:

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше