arm64: dts: rockchip: add support for firefly-rk3399 board
Firefly-rk3399 is a bord from T-Firefly, you can find detail about it here: http://en.t-firefly.com/en/firenow/Firefly_RK3399/ This patch add basic node for the board and make it able to bring up. Peripheral works: - usb hub which connect to ehci controller; - UART2 debug - eMMC - PCIe Not work: - USB 3.0 HOST, type-C port - sdio, sd-card Not test for other peripheral: - HDMI - Ethernet - OPTICAL - WiFi/BT - MIPI CSI/DSI - IR - EDP/DP Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Kever Yang
Heiko Stuebner
Родитель
09effa5c31
Коммит
171582e00d
|
|
@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,690 @@
|
|||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly-RK3399 Board";
|
||||
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
brightness-levels = <
|
||||
0 1 2 3 4 5 6 7
|
||||
8 9 10 11 12 13 14 15
|
||||
16 17 18 19 20 21 22 23
|
||||
24 25 26 27 28 29 30 31
|
||||
32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47
|
||||
48 49 50 51 52 53 54 55
|
||||
56 57 58 59 60 61 62 63
|
||||
64 65 66 67 68 69 70 71
|
||||
72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87
|
||||
88 89 90 91 92 93 94 95
|
||||
96 97 98 99 100 101 102 103
|
||||
104 105 106 107 108 109 110 111
|
||||
112 113 114 115 116 117 118 119
|
||||
120 121 122 123 124 125 126 127
|
||||
128 129 130 131 132 133 134 135
|
||||
136 137 138 139 140 141 142 143
|
||||
144 145 146 147 148 149 150 151
|
||||
152 153 154 155 156 157 158 159
|
||||
160 161 162 163 164 165 166 167
|
||||
168 169 170 171 172 173 174 175
|
||||
176 177 178 179 180 181 182 183
|
||||
184 185 186 187 188 189 190 191
|
||||
192 193 194 195 196 197 198 199
|
||||
200 201 202 203 204 205 206 207
|
||||
208 209 210 211 212 213 214 215
|
||||
216 217 218 219 220 221 222 223
|
||||
224 225 226 227 228 229 230 231
|
||||
232 233 234 235 236 237 238 239
|
||||
240 241 242 243 244 245 246 247
|
||||
248 249 250 251 252 253 254 255>;
|
||||
default-brightness-level = <200>;
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
rt5640-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,rt5640-codec";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphone Jack";
|
||||
simple-audio-card,routing =
|
||||
"Mic Jack", "MICBIAS1",
|
||||
"IN1P", "Mic Jack",
|
||||
"Headphone Jack", "HPOL",
|
||||
"Headphone Jack", "HPOR";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rt5640>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_drv>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
};
|
||||
|
||||
vccadc_ref: vccadc-ref {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_tp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <0>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
|
||||
rt5640: rt5640@1c {
|
||||
compatible = "realtek,rt5640";
|
||||
reg = <0x1c>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
realtek,in1-differential;
|
||||
#sound-dai-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rt5640_hpcon>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
accelerometer@68 {
|
||||
compatible = "invensense,mpu6500";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
bt656-supply = <&vcc1v8_dvp>;
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
buttons {
|
||||
pwrbtn: pwrbtn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd-panel {
|
||||
lcd_panel_reset: lcd-panel-reset {
|
||||
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_drv: pcie-drv {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_3g_drv: pcie-3g-drv {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
rt5640 {
|
||||
rt5640_hpcon: rt5640-hpcon {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vccadc_ref>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче