ARM: moxart: add MOXA ART SoC platform files

The MOXA ART SoC is based on Faraday's FA526. This is a ARMv4 32-bit
192 MHz CPU with MMU and 16KB/8KB D/I-cache.

Add platform support for this SoC.

Also add UC-7112-LX as a machine.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Jonas Jensen 2013-12-18 13:58:45 +01:00 коммит произвёл Olof Johansson
Родитель 345bc449e7
Коммит 17723fd357
6 изменённых файлов: 201 добавлений и 0 удалений

Просмотреть файл

@ -969,6 +969,8 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-imx/Kconfig"

Просмотреть файл

@ -169,6 +169,7 @@ machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood
machine-$(CONFIG_ARCH_KS8695) += ks8695
machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu

Просмотреть файл

@ -0,0 +1,149 @@
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_ELF_CORE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_MULTI_V4T=y
# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_ARCH_MOXART=y
CONFIG_MACH_UC7112LX=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
CONFIG_ARM_APPENDED_DTB=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_ARM_MOXART_ETHER=y
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_REALTEK_PHY=y
CONFIG_MDIO_MOXART=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MOXART=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_MOXART_WDT=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHCI_MOXART=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MOXART=y
CONFIG_DMADEVICES=y
CONFIG_MOXART_DMA=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_PROVE_LOCKING=y
CONFIG_DMA_API_DEBUG=y
CONFIG_KGDB=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_8250=y
CONFIG_DEBUG_UART_PHYS=0x98200000
CONFIG_DEBUG_UART_VIRT=0xf9820000
CONFIG_EARLY_PRINTK=y
CONFIG_KEYS=y
CONFIG_CRC32_BIT=y

Просмотреть файл

@ -0,0 +1,31 @@
config ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4T
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
select DMA_OF
select USE_OF
select CLKSRC_OF
select CLKSRC_MMIO
select HAVE_CLK
select COMMON_CLK
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
MOXA ART SoC.
The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
if ARCH_MOXART
config MACH_UC7112LX
bool "MOXA UC-7112-LX"
depends on ARCH_MOXART
help
Say Y here if you intend to run this kernel on a MOXA
UC-7112-LX embedded computer.
endif

Просмотреть файл

@ -0,0 +1,3 @@
# Object file lists.
obj-$(CONFIG_MACH_UC7112LX) += moxart.o

Просмотреть файл

@ -0,0 +1,15 @@
/*
* arch/arm/mach-moxart/moxart.c
*
* (C) Copyright 2013, Jonas Jensen <jonas.jensen@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/