fbdev/cirrusfb: Add support for Picasso IV in Zorro II mode

In Zorro II mode, the Village Tronic Picasso IV graphics card shows up as
either 2 or 3 Zorro devices:
  - One for the registers of the Cirrus Logic graphics chip,
  - One for the first bank of 2 MiB of graphics memory,
  - An optional one for the second bank of 2 MiB of graphics memory,
    if there was enough free Zorro II address space.

Based on src/sys/arch/amiga/dev/grf_cl.c from NetBSD.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
This commit is contained in:
Geert Uytterhoeven 2011-10-20 13:42:24 +02:00 коммит произвёл Florian Tobias Schandinat
Родитель 0e0d13364b
Коммит 17bdf48952
1 изменённых файлов: 21 добавлений и 0 удалений

Просмотреть файл

@ -287,6 +287,7 @@ struct zorrocl {
/* If zero, use autoprobe on RAM device */
u32 ramoffset; /* Offset of video RAM in first Zorro device */
zorro_id ramid; /* Zorro ID of RAM device */
zorro_id ramid2; /* Zorro ID of optional second RAM device */
};
static const struct zorrocl zcl_sd64 __devinitconst = {
@ -316,6 +317,13 @@ static const struct zorrocl zcl_picasso4_z3 __devinitconst = {
.ramoffset = 0x01000000,
};
static const struct zorrocl zcl_picasso4_z2 __devinitconst = {
.type = BT_PICASSO4,
.regoffset = 0x10000,
.ramid = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM1,
.ramid2 = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_RAM2,
};
static const struct zorro_device_id cirrusfb_zorro_table[] __devinitconst = {
{
@ -333,6 +341,9 @@ static const struct zorro_device_id cirrusfb_zorro_table[] __devinitconst = {
}, {
.id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z3,
.driver_data = (unsigned long)&zcl_picasso4_z3,
}, {
.id = ZORRO_PROD_VILLAGE_TRONIC_PICASSO_IV_Z2_REG,
.driver_data = (unsigned long)&zcl_picasso4_z2,
},
{ 0 }
};
@ -2257,6 +2268,16 @@ static int __devinit cirrusfb_zorro_register(struct zorro_dev *z,
}
rambase = zorro_resource_start(ram);
ramsize = zorro_resource_len(ram);
if (zcl->ramid2 &&
(ram = zorro_find_device(zcl->ramid2, NULL))) {
if (zorro_resource_start(ram) != rambase + ramsize) {
dev_warn(info->device,
"Skipping non-contiguous RAM at %pR\n",
&ram->resource);
} else {
ramsize += zorro_resource_len(ram);
}
}
}
dev_info(info->device,