Documentation: HID: Intel ISH HID document
Document explaining ISH HID operation and implementation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Srinivas Pandruvada
Jiri Kosina
Родитель
884316deb4
Коммит
17e2adf2a7
|
|
@ -0,0 +1,454 @@
|
|||
Intel Integrated Sensor Hub (ISH)
|
||||
===============================
|
||||
|
||||
A sensor hub enables the ability to offload sensor polling and algorithm
|
||||
processing to a dedicated low power co-processor. This allows the core
|
||||
processor to go into low power modes more often, resulting in the increased
|
||||
battery life.
|
||||
|
||||
There are many vendors providing external sensor hubs confirming to HID
|
||||
Sensor usage tables, and used in several tablets, 2 in 1 convertible laptops
|
||||
and embedded products. Linux had this support since Linux 3.9.
|
||||
|
||||
Intel® introduced integrated sensor hubs as a part of the SoC starting from
|
||||
Cherry Trail and now supported on multiple generations of CPU packages. There
|
||||
are many commercial devices already shipped with Integrated Sensor Hubs (ISH).
|
||||
These ISH also comply to HID sensor specification, but the difference is the
|
||||
transport protocol used for communication. The current external sensor hubs
|
||||
mainly use HID over i2C or USB. But ISH doesn't use either i2c or USB.
|
||||
|
||||
1. Overview
|
||||
|
||||
Using a analogy with a usbhid implementation, the ISH follows a similar model
|
||||
for a very high speed communication:
|
||||
|
||||
----------------- ----------------------
|
||||
| USB HID | --> | ISH HID |
|
||||
----------------- ----------------------
|
||||
----------------- ----------------------
|
||||
| USB protocol | --> | ISH Transport |
|
||||
----------------- ----------------------
|
||||
----------------- ----------------------
|
||||
| EHCI/XHCI | --> | ISH IPC |
|
||||
----------------- ----------------------
|
||||
PCI PCI
|
||||
----------------- ----------------------
|
||||
|Host controller| --> | ISH processor |
|
||||
----------------- ----------------------
|
||||
USB Link
|
||||
----------------- ----------------------
|
||||
| USB End points| --> | ISH Clients |
|
||||
----------------- ----------------------
|
||||
|
||||
Like USB protocol provides a method for device enumeration, link management
|
||||
and user data encapsulation, the ISH also provides similar services. But it is
|
||||
very light weight tailored to manage and communicate with ISH client
|
||||
applications implemented in the firmware.
|
||||
|
||||
The ISH allows multiple sensor management applications executing in the
|
||||
firmware. Like USB endpoints the messaging can be to/from a client. As part of
|
||||
enumeration process, these clients are identified. These clients can be simple
|
||||
HID sensor applications, sensor calibration application or senor firmware
|
||||
update application.
|
||||
|
||||
The implementation model is similar, like USB bus, ISH transport is also
|
||||
implemented as a bus. Each client application executing in the ISH processor
|
||||
is registered as a device on this bus. The driver, which binds each device
|
||||
(ISH HID driver) identifies the device type and registers with the hid core.
|
||||
|
||||
2. ISH Implementation: Block Diagram
|
||||
|
||||
---------------------------
|
||||
| User Space Applications |
|
||||
---------------------------
|
||||
|
||||
----------------IIO ABI----------------
|
||||
--------------------------
|
||||
| IIO Sensor Drivers |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| IIO core |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| HID Sensor Hub MFD |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| HID Core |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| HID over ISH Client |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| ISH Transport (ISHTP) |
|
||||
--------------------------
|
||||
--------------------------
|
||||
| IPC Drivers |
|
||||
--------------------------
|
||||
OS
|
||||
---------------- PCI -----------------
|
||||
Hardware + Firmware
|
||||
----------------------------
|
||||
| ISH Hardware/Firmware(FW) |
|
||||
----------------------------
|
||||
|
||||
3. High level processing in above blocks
|
||||
|
||||
3.1 Hardware Interface
|
||||
|
||||
The ISH is exposed as "Non-VGA unclassified PCI device" to the host. The PCI
|
||||
product and vendor IDs are changed from different generations of processors. So
|
||||
the source code which enumerate drivers needs to update from generation to
|
||||
generation.
|
||||
|
||||
3.2 Inter Processor Communication (IPC) driver
|
||||
Location: drivers/hid/intel-ish-hid/ipc
|
||||
|
||||
The IPC message used memory mapped I/O. The registers are defined in
|
||||
hw-ish-regs.h.
|
||||
|
||||
3.2.1 IPC/FW message types
|
||||
|
||||
There are two types of messages, one for management of link and other messages
|
||||
are to and from transport layers.
|
||||
|
||||
TX and RX of Transport messages
|
||||
|
||||
A set of memory mapped register offers support of multi byte messages TX and
|
||||
RX (E.g.IPC_REG_ISH2HOST_MSG, IPC_REG_HOST2ISH_MSG). The IPC layer maintains
|
||||
internal queues to sequence messages and send them in order to the FW.
|
||||
Optionally the caller can register handler to get notification of completion.
|
||||
A door bell mechanism is used in messaging to trigger processing in host and
|
||||
client firmware side. When ISH interrupt handler is called, the ISH2HOST
|
||||
doorbell register is used by host drivers to determine that the interrupt
|
||||
is for ISH.
|
||||
|
||||
Each side has 32 32-bit message registers and a 32-bit doorbell. Doorbell
|
||||
register has the following format:
|
||||
Bits 0..6: fragment length (7 bits are used)
|
||||
Bits 10..13: encapsulated protocol
|
||||
Bits 16..19: management command (for IPC management protocol)
|
||||
Bit 31: doorbell trigger (signal H/W interrupt to the other side)
|
||||
Other bits are reserved, should be 0.
|
||||
|
||||
3.2.2 Transport layer interface
|
||||
|
||||
To abstract HW level IPC communication, a set of callbacks are registered.
|
||||
The transport layer uses them to send and receive messages.
|
||||
Refer to struct ishtp_hw_ops for callbacks.
|
||||
|
||||
3.3 ISH Transport layer
|
||||
Location: drivers/hid/intel-ish-hid/ishtp/
|
||||
|
||||
3.3.1 A Generic Transport Layer
|
||||
|
||||
The transport layer is a bi-directional protocol, which defines:
|
||||
- Set of commands to start, stop, connect, disconnect and flow control
|
||||
(ishtp/hbm.h) for details
|
||||
- A flow control mechanism to avoid buffer overflows
|
||||
|
||||
This protocol resembles bus messages described in the following document:
|
||||
http://www.intel.com/content/dam/www/public/us/en/documents/technical-\
|
||||
specifications/dcmi-hi-1-0-spec.pdf "Chapter 7: Bus Message Layer"
|
||||
|
||||
3.3.2 Connection and Flow Control Mechanism
|
||||
|
||||
Each FW client and a protocol is identified by an UUID. In order to communicate
|
||||
to a FW client, a connection must be established using connect request and
|
||||
response bus messages. If successful, a pair (host_client_id and fw_client_id)
|
||||
will identify the connection.
|
||||
|
||||
Once connection is established, peers send each other flow control bus messages
|
||||
independently. Every peer may send a message only if it has received a
|
||||
flow-control credit before. Once it sent a message, it may not send another one
|
||||
before receiving the next flow control credit.
|
||||
Either side can send disconnect request bus message to end communication. Also
|
||||
the link will be dropped if major FW reset occurs.
|
||||
|
||||
3.3.3 Peer to Peer data transfer
|
||||
|
||||
Peer to Peer data transfer can happen with or without using DMA. Depending on
|
||||
the sensor bandwidth requirement DMA can be enabled by using module parameter
|
||||
ishtp_use_dma under intel_ishtp.
|
||||
|
||||
Each side (host and FW) manages its DMA transfer memory independently. When an
|
||||
ISHTP client from either host or FW side wants to send something, it decides
|
||||
whether to send over IPC or over DMA; for each transfer the decision is
|
||||
independent. The sending side sends DMA_XFER message when the message is in
|
||||
the respective host buffer (TX when host client sends, RX when FW client
|
||||
sends). The recipient of DMA message responds with DMA_XFER_ACK, indicating
|
||||
the sender that the memory region for that message may be reused.
|
||||
|
||||
DMA initialization is started with host sending DMA_ALLOC_NOTIFY bus message
|
||||
(that includes RX buffer) and FW responds with DMA_ALLOC_NOTIFY_ACK.
|
||||
Additionally to DMA address communication, this sequence checks capabilities:
|
||||
if thw host doesn't support DMA, then it won't send DMA allocation, so FW can't
|
||||
send DMA; if FW doesn't support DMA then it won't respond with
|
||||
DMA_ALLOC_NOTIFY_ACK, in which case host will not use DMA transfers.
|
||||
Here ISH acts as busmaster DMA controller. Hence when host sends DMA_XFER,
|
||||
it's request to do host->ISH DMA transfer; when FW sends DMA_XFER, it means
|
||||
that it already did DMA and the message resides at host. Thus, DMA_XFER
|
||||
and DMA_XFER_ACK act as ownership indicators.
|
||||
|
||||
At initial state all outgoing memory belongs to the sender (TX to host, RX to
|
||||
FW), DMA_XFER transfers ownership on the region that contains ISHTP message to
|
||||
the receiving side, DMA_XFER_ACK returns ownership to the sender. A sender
|
||||
needs not wait for previous DMA_XFER to be ack'ed, and may send another message
|
||||
as long as remaining continuous memory in its ownership is enough.
|
||||
In principle, multiple DMA_XFER and DMA_XFER_ACK messages may be sent at once
|
||||
(up to IPC MTU), thus allowing for interrupt throttling.
|
||||
Currently, ISH FW decides to send over DMA if ISHTP message is more than 3 IPC
|
||||
fragments and via IPC otherwise.
|
||||
|
||||
3.3.4 Ring Buffers
|
||||
|
||||
When a client initiate a connection, a ring or RX and TX buffers are allocated.
|
||||
The size of ring can be specified by the client. HID client set 16 and 32 for
|
||||
TX and RX buffers respectively. On send request from client, the data to be
|
||||
sent is copied to one of the send ring buffer and scheduled to be sent using
|
||||
bus message protocol. These buffers are required because the FW may have not
|
||||
have processed the last message and may not have enough flow control credits
|
||||
to send. Same thing holds true on receive side and flow control is required.
|
||||
|
||||
3.3.5 Host Enumeration
|
||||
|
||||
The host enumeration bus command allow discovery of clients present in the FW.
|
||||
There can be multiple sensor clients and clients for calibration function.
|
||||
|
||||
To ease in implantation and allow independent driver handle each client
|
||||
this transport layer takes advantage of Linux Bus driver model. Each
|
||||
client is registered as device on the the transport bus (ishtp bus).
|
||||
|
||||
Enumeration sequence of messages:
|
||||
- Host sends HOST_START_REQ_CMD, indicating that host ISHTP layer is up.
|
||||
- FW responds with HOST_START_RES_CMD
|
||||
- Host sends HOST_ENUM_REQ_CMD (enumerate FW clients)
|
||||
- FW responds with HOST_ENUM_RES_CMD that includes bitmap of available FW
|
||||
client IDs
|
||||
- For each FW ID found in that bitmap host sends
|
||||
HOST_CLIENT_PROPERTIES_REQ_CMD
|
||||
- FW responds with HOST_CLIENT_PROPERTIES_RES_CMD. Properties include UUID,
|
||||
max ISHTP message size, etc.
|
||||
- Once host received properties for that last discovered client, it considers
|
||||
ISHTP device fully functional (and allocates DMA buffers)
|
||||
|
||||
3.4 HID over ISH Client
|
||||
Location: drivers/hid/intel-ish-hid
|
||||
|
||||
The ISHTP client driver is responsible for:
|
||||
- enumerate HID devices under FW ISH client
|
||||
- Get Report descriptor
|
||||
- Register with HID core as a LL driver
|
||||
- Process Get/Set feature request
|
||||
- Get input reports
|
||||
|
||||
3.5 HID Sensor Hub MFD and IIO sensor drivers
|
||||
|
||||
The functionality in these drivers is the same as an external sensor hub.
|
||||
Refer to
|
||||
Documentation/hid/hid-sensor.txt for HID sensor
|
||||
Documentation/ABI/testing/sysfs-bus-iio for IIO ABIs to user space
|
||||
|
||||
3.6 End to End HID transport Sequence Diagram
|
||||
|
||||
HID-ISH-CLN ISHTP IPC HW
|
||||
| | | |
|
||||
| | |-----WAKE UP------------------>|
|
||||
| | | |
|
||||
| | |-----HOST READY--------------->|
|
||||
| | | |
|
||||
| | |<----MNG_RESET_NOTIFY_ACK----- |
|
||||
| | | |
|
||||
| |<----ISHTP_START------ | |
|
||||
| | | |
|
||||
| |<-----------------HOST_START_RES_CMD-------------------|
|
||||
| | | |
|
||||
| |------------------QUERY_SUBSCRIBER-------------------->|
|
||||
| | | |
|
||||
| |------------------HOST_ENUM_REQ_CMD------------------->|
|
||||
| | | |
|
||||
| |<-----------------HOST_ENUM_RES_CMD--------------------|
|
||||
| | | |
|
||||
| |------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
|
||||
| | | |
|
||||
| |<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
|
||||
| Create new device on in ishtp bus | |
|
||||
| | | |
|
||||
| |------------------HOST_CLIENT_PROPERTIES_REQ_CMD------>|
|
||||
| | | |
|
||||
| |<-----------------HOST_CLIENT_PROPERTIES_RES_CMD-------|
|
||||
| Create new device on in ishtp bus | |
|
||||
| | | |
|
||||
| |--Repeat HOST_CLIENT_PROPERTIES_REQ_CMD-till last one--|
|
||||
| | | |
|
||||
probed()
|
||||
|----ishtp_cl_connect-->|----------------- CLIENT_CONNECT_REQ_CMD-------------->|
|
||||
| | | |
|
||||
| |<----------------CLIENT_CONNECT_RES_CMD----------------|
|
||||
| | | |
|
||||
|register event callback| | |
|
||||
| | | |
|
||||
|ishtp_cl_send(
|
||||
HOSTIF_DM_ENUM_DEVICES) |----------fill ishtp_msg_hdr struct write to HW----- >|
|
||||
| | | |
|
||||
| | |<-----IRQ(IPC_PROTOCOL_ISHTP---|
|
||||
| | | |
|
||||
|<--ENUM_DEVICE RSP-----| | |
|
||||
| | | |
|
||||
for each enumerated device
|
||||
|ishtp_cl_send(
|
||||
HOSTIF_GET_HID_DESCRIPTOR |----------fill ishtp_msg_hdr struct write to HW--- >|
|
||||
| | | |
|
||||
...Response
|
||||
| | | |
|
||||
for each enumerated device
|
||||
|ishtp_cl_send(
|
||||
HOSTIF_GET_REPORT_DESCRIPTOR |----------fill ishtp_msg_hdr struct write to HW- >|
|
||||
| | | |
|
||||
| | | |
|
||||
hid_allocate_device
|
||||
| | | |
|
||||
hid_add_device | | |
|
||||
| | | |
|
||||
|
||||
|
||||
3.7 ISH Debugging
|
||||
|
||||
To debug ISH, event tracing mechanism is used. To enable debug logs
|
||||
echo 1 > /sys/kernel/debug/tracing/events/intel_ish/enable
|
||||
cat sys/kernel/debug/tracing/trace
|
||||
|
||||
3.8 ISH IIO sysfs Example on Lenovo thinkpad Yoga 260
|
||||
|
||||
root@otcpl-ThinkPad-Yoga-260:~# tree -l /sys/bus/iio/devices/
|
||||
/sys/bus/iio/devices/
|
||||
├── iio:device0 -> ../../../devices/0044:8086:22D8.0001/HID-SENSOR-200073.9.auto/iio:device0
|
||||
│ ├── buffer
|
||||
│ │ ├── enable
|
||||
│ │ ├── length
|
||||
│ │ └── watermark
|
||||
...
|
||||
│ ├── in_accel_hysteresis
|
||||
│ ├── in_accel_offset
|
||||
│ ├── in_accel_sampling_frequency
|
||||
│ ├── in_accel_scale
|
||||
│ ├── in_accel_x_raw
|
||||
│ ├── in_accel_y_raw
|
||||
│ ├── in_accel_z_raw
|
||||
│ ├── name
|
||||
│ ├── scan_elements
|
||||
│ │ ├── in_accel_x_en
|
||||
│ │ ├── in_accel_x_index
|
||||
│ │ ├── in_accel_x_type
|
||||
│ │ ├── in_accel_y_en
|
||||
│ │ ├── in_accel_y_index
|
||||
│ │ ├── in_accel_y_type
|
||||
│ │ ├── in_accel_z_en
|
||||
│ │ ├── in_accel_z_index
|
||||
│ │ └── in_accel_z_type
|
||||
...
|
||||
│ │ ├── devices
|
||||
│ │ │ │ ├── buffer
|
||||
│ │ │ │ │ ├── enable
|
||||
│ │ │ │ │ ├── length
|
||||
│ │ │ │ │ └── watermark
|
||||
│ │ │ │ ├── dev
|
||||
│ │ │ │ ├── in_intensity_both_raw
|
||||
│ │ │ │ ├── in_intensity_hysteresis
|
||||
│ │ │ │ ├── in_intensity_offset
|
||||
│ │ │ │ ├── in_intensity_sampling_frequency
|
||||
│ │ │ │ ├── in_intensity_scale
|
||||
│ │ │ │ ├── name
|
||||
│ │ │ │ ├── scan_elements
|
||||
│ │ │ │ │ ├── in_intensity_both_en
|
||||
│ │ │ │ │ ├── in_intensity_both_index
|
||||
│ │ │ │ │ └── in_intensity_both_type
|
||||
│ │ │ │ ├── trigger
|
||||
│ │ │ │ │ └── current_trigger
|
||||
...
|
||||
│ │ │ │ ├── buffer
|
||||
│ │ │ │ │ ├── enable
|
||||
│ │ │ │ │ ├── length
|
||||
│ │ │ │ │ └── watermark
|
||||
│ │ │ │ ├── dev
|
||||
│ │ │ │ ├── in_magn_hysteresis
|
||||
│ │ │ │ ├── in_magn_offset
|
||||
│ │ │ │ ├── in_magn_sampling_frequency
|
||||
│ │ │ │ ├── in_magn_scale
|
||||
│ │ │ │ ├── in_magn_x_raw
|
||||
│ │ │ │ ├── in_magn_y_raw
|
||||
│ │ │ │ ├── in_magn_z_raw
|
||||
│ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_raw
|
||||
│ │ │ │ ├── in_rot_hysteresis
|
||||
│ │ │ │ ├── in_rot_offset
|
||||
│ │ │ │ ├── in_rot_sampling_frequency
|
||||
│ │ │ │ ├── in_rot_scale
|
||||
│ │ │ │ ├── name
|
||||
...
|
||||
│ │ │ │ ├── scan_elements
|
||||
│ │ │ │ │ ├── in_magn_x_en
|
||||
│ │ │ │ │ ├── in_magn_x_index
|
||||
│ │ │ │ │ ├── in_magn_x_type
|
||||
│ │ │ │ │ ├── in_magn_y_en
|
||||
│ │ │ │ │ ├── in_magn_y_index
|
||||
│ │ │ │ │ ├── in_magn_y_type
|
||||
│ │ │ │ │ ├── in_magn_z_en
|
||||
│ │ │ │ │ ├── in_magn_z_index
|
||||
│ │ │ │ │ ├── in_magn_z_type
|
||||
│ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_en
|
||||
│ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_index
|
||||
│ │ │ │ │ └── in_rot_from_north_magnetic_tilt_comp_type
|
||||
│ │ │ │ ├── trigger
|
||||
│ │ │ │ │ └── current_trigger
|
||||
...
|
||||
│ │ │ │ ├── buffer
|
||||
│ │ │ │ │ ├── enable
|
||||
│ │ │ │ │ ├── length
|
||||
│ │ │ │ │ └── watermark
|
||||
│ │ │ │ ├── dev
|
||||
│ │ │ │ ├── in_anglvel_hysteresis
|
||||
│ │ │ │ ├── in_anglvel_offset
|
||||
│ │ │ │ ├── in_anglvel_sampling_frequency
|
||||
│ │ │ │ ├── in_anglvel_scale
|
||||
│ │ │ │ ├── in_anglvel_x_raw
|
||||
│ │ │ │ ├── in_anglvel_y_raw
|
||||
│ │ │ │ ├── in_anglvel_z_raw
|
||||
│ │ │ │ ├── name
|
||||
│ │ │ │ ├── scan_elements
|
||||
│ │ │ │ │ ├── in_anglvel_x_en
|
||||
│ │ │ │ │ ├── in_anglvel_x_index
|
||||
│ │ │ │ │ ├── in_anglvel_x_type
|
||||
│ │ │ │ │ ├── in_anglvel_y_en
|
||||
│ │ │ │ │ ├── in_anglvel_y_index
|
||||
│ │ │ │ │ ├── in_anglvel_y_type
|
||||
│ │ │ │ │ ├── in_anglvel_z_en
|
||||
│ │ │ │ │ ├── in_anglvel_z_index
|
||||
│ │ │ │ │ └── in_anglvel_z_type
|
||||
│ │ │ │ ├── trigger
|
||||
│ │ │ │ │ └── current_trigger
|
||||
...
|
||||
│ │ │ │ ├── buffer
|
||||
│ │ │ │ │ ├── enable
|
||||
│ │ │ │ │ ├── length
|
||||
│ │ │ │ │ └── watermark
|
||||
│ │ │ │ ├── dev
|
||||
│ │ │ │ ├── in_anglvel_hysteresis
|
||||
│ │ │ │ ├── in_anglvel_offset
|
||||
│ │ │ │ ├── in_anglvel_sampling_frequency
|
||||
│ │ │ │ ├── in_anglvel_scale
|
||||
│ │ │ │ ├── in_anglvel_x_raw
|
||||
│ │ │ │ ├── in_anglvel_y_raw
|
||||
│ │ │ │ ├── in_anglvel_z_raw
|
||||
│ │ │ │ ├── name
|
||||
│ │ │ │ ├── scan_elements
|
||||
│ │ │ │ │ ├── in_anglvel_x_en
|
||||
│ │ │ │ │ ├── in_anglvel_x_index
|
||||
│ │ │ │ │ ├── in_anglvel_x_type
|
||||
│ │ │ │ │ ├── in_anglvel_y_en
|
||||
│ │ │ │ │ ├── in_anglvel_y_index
|
||||
│ │ │ │ │ ├── in_anglvel_y_type
|
||||
│ │ │ │ │ ├── in_anglvel_z_en
|
||||
│ │ │ │ │ ├── in_anglvel_z_index
|
||||
│ │ │ │ │ └── in_anglvel_z_type
|
||||
│ │ │ │ ├── trigger
|
||||
│ │ │ │ │ └── current_trigger
|
||||
...
|
||||
Загрузка…
Ссылка в новой задаче