dt-bindings: display: rockchip: add document for rk3066 hdmi
This patch adds a binding that describes the HDMI controller for rk3066. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-5-jbx6244@gmail.com
This commit is contained in:
Родитель
a5c0fa44e9
Коммит
17e5bb37c5
|
@ -0,0 +1,72 @@
|
|||
Rockchip specific extensions for rk3066 HDMI
|
||||
============================================
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
"rockchip,rk3066-hdmi";
|
||||
- reg:
|
||||
Physical base address and length of the controller's registers.
|
||||
- clocks, clock-names:
|
||||
Phandle to HDMI controller clock, name should be "hclk".
|
||||
- interrupts:
|
||||
HDMI interrupt number.
|
||||
- power-domains:
|
||||
Phandle to the RK3066_PD_VIO power domain.
|
||||
- rockchip,grf:
|
||||
This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
|
||||
- ports:
|
||||
Contains one port node with two endpoints, numbered 0 and 1,
|
||||
connected respectively to vop0 and vop1.
|
||||
Contains one port node with one endpoint
|
||||
connected to a hdmi-connector node.
|
||||
- pinctrl-0, pinctrl-name:
|
||||
Switch the iomux for the HPD/I2C pins to HDMI function.
|
||||
|
||||
Example:
|
||||
hdmi: hdmi@10116000 {
|
||||
compatible = "rockchip,rk3066-hdmi";
|
||||
reg = <0x10116000 0x2000>;
|
||||
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_HDMI>;
|
||||
clock-names = "hclk";
|
||||
power-domains = <&power RK3066_PD_VIO>;
|
||||
rockchip,grf = <&grf>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
hdmi_in: port@0 {
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
hdmi_in_vop0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&vop0_out_hdmi>;
|
||||
};
|
||||
hdmi_in_vop1: endpoint@1 {
|
||||
reg = <1>;
|
||||
remote-endpoint = <&vop1_out_hdmi>;
|
||||
};
|
||||
};
|
||||
hdmi_out: port@1 {
|
||||
reg = <1>;
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hdmi {
|
||||
hdmi_hpd: hdmi-hpd {
|
||||
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
|
||||
};
|
||||
hdmii2c_xfer: hdmii2c-xfer {
|
||||
rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
|
||||
<0 RK_PA2 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
Загрузка…
Ссылка в новой задаче