diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 7ecf15e66a3f..b590f8468693 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -20,7 +20,6 @@ * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf */ - #include #include #include @@ -64,12 +63,16 @@ /* OFFSETS for Devices 4,5 and 6 Function 0 */ #define MC_CHANNEL_ADDR_MATCH 0xf0 - -#define MC_MASK_DIMM (1 << 41) -#define MC_MASK_RANK (1 << 40) -#define MC_MASK_BANK (1 << 39) -#define MC_MASK_PAGE (1 << 38) -#define MC_MASK_COL (1 << 37) +#define MC_CHANNEL_ERROR_MASK 0xf8 +#define MC_CHANNEL_ERROR_INJECT 0xfc + #define INJECT_ADDR_PARITY 0x10 + #define INJECT_ECC 0x08 + #define MASK_CACHELINE 0x06 + #define MASK_FULL_CACHELINE 0x06 + #define MASK_MSB32_CACHELINE 0x04 + #define MASK_LSB32_CACHELINE 0x02 + #define NO_MASK_CACHELINE 0x00 + #define REPEAT_EN 0x01 /* * i7core structs @@ -84,10 +87,23 @@ struct i7core_info { u32 max_dod; }; + +struct i7core_inject { + int enable; + + u32 section; + u32 type; + u32 eccmask; + + /* Error address mask */ + int channel, dimm, rank, bank, page, col; +}; + struct i7core_pvt { struct pci_dev *pci_mcr; /* Dev 3:0 */ struct pci_dev *pci_ch[NUM_CHANS][NUM_FUNCS]; struct i7core_info info; + struct i7core_inject inject; }; /* Device name and register DID (Device ID) */ @@ -166,6 +182,7 @@ static inline int maxnumcol(struct i7core_pvt *pvt) return cols[((pvt->info.max_dod >> 9) & 0x3) << 12]; } + /**************************************************************************** Memory check routines ****************************************************************************/ @@ -199,6 +216,390 @@ static int get_dimm_config(struct mem_ctl_info *mci) return 0; } +/**************************************************************************** + Error insertion routines + ****************************************************************************/ + +/* The i7core has independent error injection features per channel. + However, to have a simpler code, we don't allow enabling error injection + on more than one channel. + Also, since a change at an inject parameter will be applied only at enable, + we're disabling error injection on all write calls to the sysfs nodes that + controls the error code injection. + */ +static void disable_inject(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + + pvt->inject.enable = 0; + + pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, 0); +} + +/* + * i7core inject inject.section + * + * accept and store error injection inject.section value + * bit 0 - refers to the lower 32-byte half cacheline + * bit 1 - refers to the upper 32-byte half cacheline + */ +static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if ((rc < 0) || (value > 3)) + return 0; + + pvt->inject.section = (u32) value; + return count; +} + +static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.section); +} + +/* + * i7core inject.type + * + * accept and store error injection inject.section value + * bit 0 - repeat enable - Enable error repetition + * bit 1 - inject ECC error + * bit 2 - inject parity error + */ +static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if ((rc < 0) || (value > 7)) + return 0; + + pvt->inject.type = (u32) value; + return count; +} + +static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.type); +} + +/* + * i7core_inject_inject.eccmask_store + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ +static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = strict_strtoul(data, 10, &value); + if (rc < 0) + return 0; + + pvt->inject.eccmask = (u32) value; + return count; +} + +static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.eccmask); +} + +/* + * i7core_addrmatch + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ +static ssize_t i7core_inject_addrmatch_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + char *cmd, *val; + long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + do { + cmd = strsep((char **) &data, ":"); + if (!cmd) + break; + val = strsep((char **) &data, " \n\t"); + if (!val) + return cmd - data; + + if (!strcasecmp(val,"any")) + value = -1; + else { + rc = strict_strtol(val, 10, &value); + if ((rc < 0) || (value < 0)) + return cmd - data; + } + + if (!strcasecmp(cmd,"channel")) { + if (value < 3) + pvt->inject.channel = value; + else + return cmd - data; + } else if (!strcasecmp(cmd,"dimm")) { + if (value < 4) + pvt->inject.dimm = value; + else + return cmd - data; + } else if (!strcasecmp(cmd,"rank")) { + if (value < 4) + pvt->inject.rank = value; + else + return cmd - data; + } else if (!strcasecmp(cmd,"bank")) { + if (value < 4) + pvt->inject.bank = value; + else + return cmd - data; + } else if (!strcasecmp(cmd,"page")) { + if (value <= 0xffff) + pvt->inject.page = value; + else + return cmd - data; + } else if (!strcasecmp(cmd,"col") || + !strcasecmp(cmd,"column")) { + if (value <= 0x3fff) + pvt->inject.col = value; + else + return cmd - data; + } + } while (1); + + return count; +} + +static ssize_t i7core_inject_addrmatch_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + char channel[4], dimm[4], bank[4], rank[4], page[7], col[7]; + + if (pvt->inject.channel < 0) + sprintf(channel, "any"); + else + sprintf(channel, "%d", pvt->inject.channel); + if (pvt->inject.dimm < 0) + sprintf(dimm, "any"); + else + sprintf(dimm, "%d", pvt->inject.dimm); + if (pvt->inject.bank < 0) + sprintf(bank, "any"); + else + sprintf(bank, "%d", pvt->inject.bank); + if (pvt->inject.rank < 0) + sprintf(rank, "any"); + else + sprintf(rank, "%d", pvt->inject.rank); + if (pvt->inject.page < 0) + sprintf(page, "any"); + else + sprintf(page, "0x%04x", pvt->inject.page); + if (pvt->inject.col < 0) + sprintf(col, "any"); + else + sprintf(col, "0x%04x", pvt->inject.col); + + return sprintf(data, "channel: %s\ndimm: %s\nbank: %s\n" + "rank: %s\npage: %s\ncolumn: %s\n", + channel, dimm, bank, rank, page, col); +} + +/* + * This routine prepares the Memory Controller for error injection. + * The error will be injected when some process tries to write to the + * memory that matches the given criteria. + * The criteria can be set in terms of a mask where dimm, rank, bank, page + * and col can be specified. + * A -1 value for any of the mask items will make the MCU to ignore + * that matching criteria for error injection. + * + * It should be noticed that the error will only happen after a write operation + * on a memory that matches the condition. if REPEAT_EN is not enabled at + * inject mask, then it will produce just one error. Otherwise, it will repeat + * until the injectmask would be cleaned. + * + * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD + * is reliable enough to check if the MC is using the + * three channels. However, this is not clear at the datasheet. + */ +static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci, + const char *data, size_t count) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 injectmask; + u64 mask = 0; + int rc; + long enable; + + rc = strict_strtoul(data, 10, &enable); + if ((rc < 0)) + return 0; + + if (enable) { + pvt->inject.enable = 1; + } else { + disable_inject(mci); + return count; + } + + /* Sets pvt->inject.dimm mask */ + if (pvt->inject.dimm < 0) + mask |= 1l << 41; + else { + if (maxnumdimms(pvt) > 2) + mask |= (pvt->inject.dimm & 0x3l) << 35; + else + mask |= (pvt->inject.dimm & 0x1l) << 36; + } + + /* Sets pvt->inject.rank mask */ + if (pvt->inject.rank < 0) + mask |= 1l << 40; + else { + if (maxnumdimms(pvt) > 2) + mask |= (pvt->inject.rank & 0x1l) << 34; + else + mask |= (pvt->inject.rank & 0x3l) << 34; + } + + /* Sets pvt->inject.bank mask */ + if (pvt->inject.bank < 0) + mask |= 1l << 39; + else + mask |= (pvt->inject.bank & 0x15l) << 30; + + /* Sets pvt->inject.page mask */ + if (pvt->inject.page < 0) + mask |= 1l << 38; + else + mask |= (pvt->inject.page & 0xffffl) << 14; + + /* Sets pvt->inject.column mask */ + if (pvt->inject.col < 0) + mask |= 1l << 37; + else + mask |= (pvt->inject.col & 0x3fffl); + + pci_write_config_qword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ADDR_MATCH, mask); + + pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask); + + /* + * bit 0: REPEAT_EN + * bits 1-2: MASK_HALF_CACHELINE + * bit 3: INJECT_ECC + * bit 4: INJECT_ADDR_PARITY + */ + + injectmask = (pvt->inject.type & 1) && + (pvt->inject.section & 0x3) << 1 && + (pvt->inject.type & 0x6) << (3 - 1); + + pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, injectmask); + + + debugf0("Error inject addr match 0x%016llx, ecc 0x%08x, inject 0x%08x\n", + mask, pvt->inject.eccmask, injectmask); + + return count; +} + +static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci, + char *data) +{ + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "%d\n", pvt->inject.enable); +} + +/* + * Sysfs struct + */ +static struct mcidev_sysfs_attribute i7core_inj_attrs[] = { + + { + .attr = { + .name = "inject_section", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_section_show, + .store = i7core_inject_section_store, + }, { + .attr = { + .name = "inject_type", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_type_show, + .store = i7core_inject_type_store, + }, { + .attr = { + .name = "inject_eccmask", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_eccmask_show, + .store = i7core_inject_eccmask_store, + }, { + .attr = { + .name = "inject_addrmatch", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_addrmatch_show, + .store = i7core_inject_addrmatch_store, + }, { + .attr = { + .name = "inject_enable", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = i7core_inject_enable_show, + .store = i7core_inject_enable_store, + }, +}; + /**************************************************************************** Device initialization routines: put/get, init/exit ****************************************************************************/ @@ -322,10 +723,11 @@ static int __devinit i7core_probe(struct pci_dev *pdev, debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); - mci->dev = &pdev->dev; /* record ptr to the generic device */ + mci->dev = &pdev->dev; /* record ptr to the generic device */ dev_set_drvdata(mci->dev, mci); pvt = mci->pvt_info; + // pvt->system_address = pdev; /* Record this device in our private */ // pvt->maxch = num_channels; // pvt->maxdimmperch = num_dimms_per_channel; @@ -343,6 +745,7 @@ static int __devinit i7core_probe(struct pci_dev *pdev, mci->ctl_name = i7core_devs[dev_idx].ctl_name; mci->dev_name = pci_name(pdev); mci->ctl_page_to_phys = NULL; + mci->mc_driver_sysfs_attributes = i7core_inj_attrs; /* add this new MC control structure to EDAC's list of MCs */ if (edac_mc_add_mc(mci)) { @@ -365,6 +768,14 @@ static int __devinit i7core_probe(struct pci_dev *pdev, __func__); } + /* Default error mask is any memory */ + pvt->inject.channel = -1; + pvt->inject.dimm = -1; + pvt->inject.rank = -1; + pvt->inject.bank = -1; + pvt->inject.page = -1; + pvt->inject.col = -1; + return 0; fail1: