scsi: mpt3sas: Fix indentation

Modify the indentation such that smatch no longer complains about
inconsistent indenting.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Chaitra P B <chaitra.basappa@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -661,7 +661,7 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc)
 	if (!ioc->fault_reset_work_q) {
 		pr_err(MPT3SAS_FMT "%s: failed (line=%d)\n",
 		    ioc->name, __func__, __LINE__);
-			return;
+		return;
 	}
 	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 	if (ioc->fault_reset_work_q)

drivers/scsi/mpt3sas/mpt3sas_scsih.c

@@ -2256,7 +2256,7 @@ scsih_slave_configure(struct scsi_device *sdev)
 			ds = "SSP";
 		} else {
 			qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
-			 if (raid_device->device_info &
+			if (raid_device->device_info &
 			    MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
 				ds = "SATA";
 			else
@@ -4003,19 +4003,19 @@ _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, U16 event,
 static void
 _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
 					u16 smid, u16 handle)
-	{
-		Mpi2SasIoUnitControlRequest_t *mpi_request;
-		u32 ioc_state;
-		int i = smid - ioc->internal_smid;
-		unsigned long flags;
+{
+	Mpi2SasIoUnitControlRequest_t *mpi_request;
+	u32 ioc_state;
+	int i = smid - ioc->internal_smid;
+	unsigned long flags;
 
-		if (ioc->remove_host) {
-			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+	if (ioc->remove_host) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
 			    "%s: host has been removed\n",
 			     __func__, ioc->name));
-			return;
-		} else if (ioc->pci_error_recovery) {
-			dewtprintk(ioc, pr_info(MPT3SAS_FMT
+		return;
+	} else if (ioc->pci_error_recovery) {
+		dewtprintk(ioc, pr_info(MPT3SAS_FMT
 			    "%s: host in pci error recovery\n",
 			    __func__, ioc->name));
 		return;
@@ -4673,19 +4673,19 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 	}
 
 
-	/* host recovery or link resets sent via IOCTLs */
-	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
+	if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress) {
+		/* host recovery or link resets sent via IOCTLs */
 		return SCSI_MLQUEUE_HOST_BUSY;
-
-	/* device has been deleted */
-	else if (sas_target_priv_data->deleted) {
+	} else if (sas_target_priv_data->deleted) {
+		/* device has been deleted */
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
-	/* device busy with task management */
 	} else if (sas_target_priv_data->tm_busy ||
-	    sas_device_priv_data->block)
+		   sas_device_priv_data->block) {
+		/* device busy with task management */
 		return SCSI_MLQUEUE_DEVICE_BUSY;
+	}
 
 	/*
 	 * Bug work around for firmware SATL handling.  The loop
@@ -5811,7 +5811,7 @@ _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 	}
 
 	_scsih_expander_node_add(ioc, sas_expander);
-	 return 0;
+	return 0;
 
  out_fail:
 
@@ -9522,7 +9522,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
 		break;
 	case MPT3SAS_PORT_ENABLE_COMPLETE:
 		ioc->start_scan = 0;
-	if (missing_delay[0] != -1 && missing_delay[1] != -1)
+		if (missing_delay[0] != -1 && missing_delay[1] != -1)
 			mpt3sas_base_update_missing_delay(ioc, missing_delay[0],
 			    missing_delay[1]);
 		dewtprintk(ioc, pr_info(MPT3SAS_FMT

drivers/scsi/mpt3sas/mpt3sas_transport.c

@@ -563,7 +563,7 @@ _transport_add_phy_to_an_existing_port(struct MPT3SAS_ADAPTER *ioc,
 				return;
 		}
 		_transport_add_phy(ioc, mpt3sas_port, mpt3sas_phy);
-			return;
+		return;
 	}
 
 }