Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

This commit is contained in:
David S. Miller 2008-10-30 23:35:23 -07:00
Родитель 263e69cbc9 adef199c61
Коммит 19b8cba2e8
9 изменённых файлов: 18 добавлений и 24 удалений

Просмотреть файл

@ -743,6 +743,8 @@ P: Nick Kossifidis
M: mickflemm@gmail.com
P: Luis R. Rodriguez
M: mcgrof@gmail.com
P: Bob Copeland
M: me@bobcopeland.com
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained

Просмотреть файл

@ -2942,10 +2942,8 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
if (sc->opmode == NL80211_IFTYPE_STATION ||
sc->opmode == NL80211_IFTYPE_ADHOC) {
if (sc->opmode == NL80211_IFTYPE_ADHOC)
rfilt |= AR5K_RX_FILTER_BEACON;
}
/* Set filters */
ath5k_hw_set_rx_filter(ah,rfilt);

Просмотреть файл

@ -339,7 +339,7 @@ static struct {
{ ATH5K_DEBUG_BEACON, "beacon", "beacon handling" },
{ ATH5K_DEBUG_CALIBRATE, "calib", "periodic calibration" },
{ ATH5K_DEBUG_TXPOWER, "txpower", "transmit power setting" },
{ ATH5K_DEBUG_LED, "led", "LED mamagement" },
{ ATH5K_DEBUG_LED, "led", "LED management" },
{ ATH5K_DEBUG_DUMP_RX, "dumprx", "print received skb content" },
{ ATH5K_DEBUG_DUMP_TX, "dumptx", "print transmit skb content" },
{ ATH5K_DEBUG_DUMPBANDS, "dumpbands", "dump bands" },

Просмотреть файл

@ -806,6 +806,8 @@ static const struct ath5k_ini_mode ar5212_rf5111_ini_mode_end[] = {
{ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
{ AR5K_PHY(642),
{ 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
{ 0xa228,
{ 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5, 0x000001b5 } },
{ 0xa23c,
{ 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af } },
};

Просмотреть файл

@ -537,9 +537,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
mdelay(1);
/*
* Write some more initial register settings
* Write some more initial register settings for revised chips
*/
if (ah->ah_version == AR5K_AR5212) {
if (ah->ah_version == AR5K_AR5212 &&
ah->ah_phy_revision > 0x41) {
ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
if (channel->hw_value == CHANNEL_G)
@ -558,19 +559,10 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
else
ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
/* Some bits are disabled here, we know nothing about
* register 0xa228 yet, most of the times this ends up
* with a value 0x9b5 -haven't seen any dump with
* a different value- */
/* Got this from decompiling binary HAL */
data = ath5k_hw_reg_read(ah, 0xa228);
data &= 0xfffffdff;
ath5k_hw_reg_write(ah, data, 0xa228);
/* Got this from legacy-hal */
AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200);
data = ath5k_hw_reg_read(ah, 0xa228);
data &= 0xfffe03ff;
ath5k_hw_reg_write(ah, data, 0xa228);
data = 0;
AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff);
/* Just write 0x9b5 ? */
/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */

Просмотреть файл

@ -2090,7 +2090,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
iwl4965_error_recovery(priv);
iwl_power_update_mode(priv, 1);
ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
if (test_and_clear_bit(STATUS_MODE_PENDING, &priv->status))
iwl4965_set_mode(priv, priv->iw_mode);
@ -2342,6 +2341,7 @@ static void iwl_bg_alive_start(struct work_struct *data)
mutex_lock(&priv->mutex);
iwl_alive_start(priv);
mutex_unlock(&priv->mutex);
ieee80211_notify_mac(priv->hw, IEEE80211_NOTIFY_RE_ASSOC);
}
static void iwl4965_bg_rf_kill(struct work_struct *work)

Просмотреть файл

@ -605,9 +605,9 @@ int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
if (ret == 0) {
*curlevel = le16_to_cpu(cmd.curlevel);
if (minlevel)
*minlevel = le16_to_cpu(cmd.minlevel);
*minlevel = cmd.minlevel;
if (maxlevel)
*maxlevel = le16_to_cpu(cmd.maxlevel);
*maxlevel = cmd.maxlevel;
}
lbs_deb_leave(LBS_DEB_CMD);

Просмотреть файл

@ -598,8 +598,8 @@ static int lbs_process_bss(struct bss_descriptor *bss,
switch (elem->id) {
case MFIE_TYPE_SSID:
bss->ssid_len = elem->len;
memcpy(bss->ssid, elem->data, elem->len);
bss->ssid_len = min_t(int, 32, elem->len);
memcpy(bss->ssid, elem->data, bss->ssid_len);
lbs_deb_scan("got SSID IE: '%s', len %u\n",
escape_essid(bss->ssid, bss->ssid_len),
bss->ssid_len);

Просмотреть файл

@ -1,5 +1,5 @@
menuconfig RT2X00
bool "Ralink driver support"
tristate "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,