usb: dwc3: ep0: explicitly call dwc3_ep0_prepare_one_trb()

Let's call dwc3_ep0_prepare_one_trb() explicitly
because there are occasions where we will need more
than one TRB to handle an EP0 transfer.

A follow-up patch will fix one bug related to
multiple-TRB Data Phases when it comes to
mapping/unmapping requests for DMA.

Cc: <stable@vger.kernel.org>
Reported-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc3/ep0.c

@@ -69,8 +69,7 @@ static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum,
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
-static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
+static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum)
-		u32 len, u32 type, bool chain)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_ep			*dep;
@@ -80,8 +79,6 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 	if (dep->flags & DWC3_EP_BUSY)
 		return 0;
 
-	dwc3_ep0_prepare_one_trb(dwc, epnum, buf_dma, len, type, chain);
-
 	memset(&params, 0, sizeof(params));
 	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
 	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
@@ -286,8 +283,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
 
 	complete(&dwc->ep0_in_setup);
 
-	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+	dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8,
 			DWC3_TRBCTL_CONTROL_SETUP, false);
+	ret = dwc3_ep0_start_trans(dwc, 0);
 	WARN_ON(ret < 0);
 }
 
@@ -918,9 +916,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 			dwc->ep0_next_event = DWC3_EP0_COMPLETE;
 
-			ret = dwc3_ep0_start_trans(dwc, epnum,
+			dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr,
-					dwc->ctrl_req_addr, 0,
+					0, DWC3_TRBCTL_CONTROL_DATA, false);
-					DWC3_TRBCTL_CONTROL_DATA, false);
+			ret = dwc3_ep0_start_trans(dwc, epnum);
 			WARN_ON(ret < 0);
 		}
 	}
@@ -999,9 +997,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 	req->direction = !!dep->number;
 
 	if (req->request.length == 0) {
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ctrl_req_addr, 0,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
 			&& (dep->number == 0)) {
 		u32	transfer_size = 0;
@@ -1017,7 +1016,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
 			transfer_size = ALIGN(req->request.length - maxpacket,
 					      maxpacket);
-			ret = dwc3_ep0_start_trans(dwc, dep->number,
+			dwc3_ep0_prepare_one_trb(dwc, dep->number,
 						   req->request.dma,
 						   transfer_size,
 						   DWC3_TRBCTL_CONTROL_DATA,
@@ -1029,18 +1028,20 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 
 		dwc->ep0_bounced = true;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number,
 				dwc->ep0_bounce_addr, transfer_size,
 				DWC3_TRBCTL_CONTROL_DATA, false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	} else {
 		ret = usb_gadget_map_request_by_dev(dwc->sysdev,
 				&req->request, dep->number);
 		if (ret)
 			return;
 
-		ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
+		dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma,
 				req->request.length, DWC3_TRBCTL_CONTROL_DATA,
 				false);
+		ret = dwc3_ep0_start_trans(dwc, dep->number);
 	}
 
 	WARN_ON(ret < 0);
@@ -1054,8 +1055,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
 	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
 		: DWC3_TRBCTL_CONTROL_STATUS2;
 
-	return dwc3_ep0_start_trans(dwc, dep->number,
+	dwc3_ep0_prepare_one_trb(dwc, dep->number,
 			dwc->ctrl_req_addr, 0, type, false);
+	return dwc3_ep0_start_trans(dwc, dep->number);
 }
 
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)