Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyjIrAQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgTCuB/9wEiNDr5DvIYHdQM0/TrAWzMepdaO2YAHI 5v2NaZ3l0LDB1yXEJUJn/f7PRbGW9IETaldXLWKca8g8zJq6tM60p4gWx0XHw2hq szajRwBhbvo16u3vSNOJ1LlK8SdfI+ENx9129qWVtXToODK/0TIo+ubOpPT3uBxt P2Og+2F0zoj1WSWTXPEaGexF0YnwRp1v5NODF9XV6jpB9wAL+CYsllse7GFLxc52 sdp2Lfp/r/3VzHOCDOJ8e9YPXmLIYrjBQNw12/XkGdbnMKucCnI8GYxdkU7gSUh8 9ryBAAjOWREopY8GwdBfX+C+l1AKUFi8YFvC6PCxqFoseglzvAK0 =/JXo -----END PGP SIGNATURE----- Merge tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Core new soc features are hdmi-cec for rk3328, scheduler capacity-values and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. * tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. arm64: dts: rockchip: Add nanopi4 ethernet phy arm64: dts: rockchip: Add PWM fan for NanoPC-T4 arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 arm64: dts: rockchip: Add Nanopi NEO4 initial support arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. arm64: dts: rockchip: enable mali on rock960 boards arm64: dts: rockchip: enable mali on Rock Pi 4 arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes arm64: dts: rockchip: give some life to the rk3328-roc-cc leds arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 arm64: dts: rockchip: add leds node on rk3328-rock64 ... Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
Коммит
1a88083b93
|
|
@ -97,6 +97,7 @@ properties:
|
|||
- enum:
|
||||
- friendlyarm,nanopc-t4
|
||||
- friendlyarm,nanopi-m4
|
||||
- friendlyarm,nanopi-neo4
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: GeekBuying GeekBox
|
||||
|
|
@ -325,6 +326,11 @@ properties:
|
|||
- const: netxeon,r89
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Orange Pi RK3399 board
|
||||
items:
|
||||
- const: rockchip,rk3399-orangepi
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Phytec phyCORE-RK3288 Rapid Development Kit
|
||||
items:
|
||||
- const: phytec,rk3288-pcm-947
|
||||
|
|
|
|||
|
|
@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
|
||||
|
|
|
|||
|
|
@ -81,12 +81,44 @@
|
|||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "firefly:blue:power";
|
||||
linux,default-trigger = "heartbeat";
|
||||
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
mode = <0x23>;
|
||||
};
|
||||
|
||||
user {
|
||||
label = "firefly:yellow:user";
|
||||
linux,default-trigger = "mmc1";
|
||||
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
mode = <0x05>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
|
|
|
|||
|
|
@ -65,6 +65,27 @@
|
|||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&ir_int>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
standby {
|
||||
gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rockchip,rk3328";
|
||||
|
|
@ -157,6 +178,8 @@
|
|||
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk805-clkout2";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
|
|
@ -218,7 +241,7 @@
|
|||
};
|
||||
|
||||
vcc_18: LDO_REG1 {
|
||||
regulator-name = "vdd_18";
|
||||
regulator-name = "vcc_18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
|
|
@ -230,7 +253,7 @@
|
|||
};
|
||||
|
||||
vcc18_emmc: LDO_REG2 {
|
||||
regulator-name = "vcc_18emmc";
|
||||
regulator-name = "vcc18_emmc";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
|
|
@ -281,6 +304,12 @@
|
|||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_int: ir-int {
|
||||
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
|
|
|
|||
|
|
@ -657,14 +657,17 @@
|
|||
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru PCLK_HDMI>,
|
||||
<&cru SCLK_HDMI_SFC>;
|
||||
<&cru SCLK_HDMI_SFC>,
|
||||
<&cru SCLK_RTC32K>;
|
||||
clock-names = "iahb",
|
||||
"isfr";
|
||||
"isfr",
|
||||
"cec";
|
||||
phys = <&hdmiphy>;
|
||||
phy-names = "hdmi";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
|
||||
rockchip,grf = <&grf>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
|
|
|
|||
|
|
@ -52,6 +52,73 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_rx>;
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
/*
|
||||
* With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
|
||||
* work out to 0, ~1200, ~3000, and 5000RPM respectively.
|
||||
*/
|
||||
cooling-levels = <0 12 18 255>;
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vcc12v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
cpu_warm: cpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_hot: cpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map2 {
|
||||
trip = <&cpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu_thermal {
|
||||
trips {
|
||||
gpu_warm: gpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
gpu_hot: gpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
cooling-maps {
|
||||
map1 {
|
||||
trip = <&gpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
trip = <&gpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,50 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2019 Amarula Solutions B.V.
|
||||
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3399-nanopi4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "FriendlyARM NanoPi NEO4";
|
||||
compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
|
||||
|
||||
vdd_5v: vdd-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_5v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc5v0_core: vcc5v0-core {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_core";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vdd_5v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb1: vcc5v0-usb1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb1";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&vcc3v3_sys {
|
||||
vin-supply = <&vcc5v0_core>;
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb1>;
|
||||
};
|
||||
|
||||
&vbus_typec {
|
||||
regulator-always-on;
|
||||
vin-supply = <&vdd_5v>;
|
||||
};
|
||||
|
|
@ -148,15 +148,28 @@
|
|||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
|
||||
phy-handle = <&rtl8211e>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc3v3_s3>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
snps,reset-delays-us = <0 10000 30000>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8211e: phy@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
|
|
@ -481,6 +494,16 @@
|
|||
};
|
||||
};
|
||||
|
||||
phy {
|
||||
phy_intb: phy-intb {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_rstb: phy-rstb {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
cpu_b_sleep: cpu-b-sleep {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,790 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "dt-bindings/pwm/pwm.h"
|
||||
#include "dt-bindings/input/input.h"
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Orange Pi RK3399 Board";
|
||||
compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
press-threshold-microvolt = <100000>;
|
||||
};
|
||||
|
||||
button-down {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
press-threshold-microvolt = <300000>;
|
||||
};
|
||||
|
||||
back {
|
||||
label = "Back";
|
||||
linux,code = <KEY_BACK>;
|
||||
press-threshold-microvolt = <985000>;
|
||||
};
|
||||
|
||||
menu {
|
||||
label = "Menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
press-threshold-microvolt = <1314000>;
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
linux,input-type = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_btn>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_reg_on_h>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v0_sd: vcc3v0-sd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_pwr_h>;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-name = "vcc3v0_sd";
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vbus_typec: vbus-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_typec_en>;
|
||||
regulator-name = "vbus_typec";
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc3v3_s3>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_3v0>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_tp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmupll: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmupll";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <2500000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3400000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
|
||||
ak09911@c {
|
||||
compatible = "asahi-kasei,ak09911";
|
||||
reg = <0x0c>;
|
||||
vdd-supply = <&vcc3v3_s3>;
|
||||
vid-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
mpu6500@68 {
|
||||
compatible = "invensense,mpu6500";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gsensor_int_l>;
|
||||
vddio-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
lsm6ds3@6a {
|
||||
compatible = "st,lsm6ds3";
|
||||
reg = <0x6a>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gyr_int_l>;
|
||||
vdd-supply = <&vcc3v3_s3>;
|
||||
vddio-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
cm32181@10 {
|
||||
compatible = "capella,cm32181";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&light_int_l>;
|
||||
vdd-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
fusb302@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&chg_cc_int_l>;
|
||||
vbus-supply = <&vbus_typec>;
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
buttons {
|
||||
pwr_btn: pwr-btn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sd {
|
||||
sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||||
rockchip,pins =
|
||||
<RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_typec_en: vcc5v0-typec-en {
|
||||
rockchip,pins =
|
||||
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_reg_on_h: wifi-reg-on-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_host_wake_l: wifi-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
bluetooth {
|
||||
bt_reg_on_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
mpu6500 {
|
||||
gsensor_int_l: gsensor-int-l {
|
||||
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lsm6ds3 {
|
||||
gyr_int_l: gyr-int-l {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
cm32181 {
|
||||
light_int_l: light-int-l {
|
||||
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb302 {
|
||||
chg_cc_int_l: chg-cc-int-l {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
clock-frequency = <50000000>;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <50000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
clock-frequency = <150000000>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
vmmc-supply = <&vcc3v0_sd>;
|
||||
vqmmc-supply = <&vcc_sdio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
phy-supply = <&vbus_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -146,6 +146,7 @@
|
|||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
drive-impedance-ohm = <33>;
|
||||
};
|
||||
|
||||
&gmac {
|
||||
|
|
|
|||
|
|
@ -157,6 +157,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
|
|
|
|||
|
|
@ -18,6 +18,15 @@
|
|||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc1v8_s0: vcc1v8-s0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s0";
|
||||
|
|
@ -26,12 +35,13 @@
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
|
|
@ -40,7 +50,7 @@
|
|||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
|
|
@ -64,7 +74,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -96,6 +106,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -123,7 +138,7 @@
|
|||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
status = "okay";
|
||||
|
||||
regulator-state-mem {
|
||||
|
|
@ -141,7 +156,7 @@
|
|||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
|
@ -159,16 +174,16 @@
|
|||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc_sys>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
|
||||
|
|
|
|||
|
|
@ -222,6 +222,10 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -71,6 +71,7 @@
|
|||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <485>;
|
||||
clocks = <&cru ARMCLKL>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <100>;
|
||||
|
|
@ -82,6 +83,7 @@
|
|||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <485>;
|
||||
clocks = <&cru ARMCLKL>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <100>;
|
||||
|
|
@ -93,6 +95,7 @@
|
|||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <485>;
|
||||
clocks = <&cru ARMCLKL>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <100>;
|
||||
|
|
@ -104,6 +107,7 @@
|
|||
compatible = "arm,cortex-a53";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <485>;
|
||||
clocks = <&cru ARMCLKL>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <100>;
|
||||
|
|
@ -115,6 +119,7 @@
|
|||
compatible = "arm,cortex-a72";
|
||||
reg = <0x0 0x100>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
clocks = <&cru ARMCLKB>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <436>;
|
||||
|
|
@ -126,6 +131,7 @@
|
|||
compatible = "arm,cortex-a72";
|
||||
reg = <0x0 0x101>;
|
||||
enable-method = "psci";
|
||||
capacity-dmips-mhz = <1024>;
|
||||
clocks = <&cru ARMCLKB>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
dynamic-power-coefficient = <436>;
|
||||
|
|
@ -333,6 +339,7 @@
|
|||
phys = <&emmc_phy>;
|
||||
phy-names = "phy_arasan";
|
||||
power-domains = <&power RK3399_PD_EMMC>;
|
||||
disable-cqe-dcmd;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -1450,6 +1457,7 @@
|
|||
clock-names = "refclk";
|
||||
#phy-cells = <1>;
|
||||
resets = <&cru SRST_PCIEPHY>;
|
||||
drive-impedance-ohm = <50>;
|
||||
reset-names = "phy";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче