x86/mm: Avoid incomplete Global INVLPG flushes

commit ce0b15d11a upstream.

The INVLPG instruction is used to invalidate TLB entries for a
specified virtual address.  When PCIDs are enabled, INVLPG is supposed
to invalidate TLB entries for the specified address for both the
current PCID *and* Global entries.  (Note: Only kernel mappings set
Global=1.)

Unfortunately, some INVLPG implementations can leave Global
translations unflushed when PCIDs are enabled.

As a workaround, never enable PCIDs on affected processors.

I expect there to eventually be microcode mitigations to replace this
software workaround.  However, the exact version numbers where that
will happen are not known today.  Once the version numbers are set in
stone, the processor list can be tweaked to only disable PCIDs on
affected processors with affected microcode.

Note: if anyone wants a quick fix that doesn't require patching, just
stick 'nopcid' on your kernel command-line.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/x86/include/asm/intel-family.h

@@ -112,6 +112,11 @@
 
 #define INTEL_FAM6_ALDERLAKE		0x97	/* Golden Cove / Gracemont */
 #define INTEL_FAM6_ALDERLAKE_L		0x9A	/* Golden Cove / Gracemont */
+#define INTEL_FAM6_ALDERLAKE_N		0xBE
+
+#define INTEL_FAM6_RAPTORLAKE		0xB7
+#define INTEL_FAM6_RAPTORLAKE_P		0xBA
+#define INTEL_FAM6_RAPTORLAKE_S		0xBF
 
 #define INTEL_FAM6_LUNARLAKE_M		0xBD
 

arch/x86/mm/init.c

@@ -9,6 +9,7 @@
 #include <linux/sched/task.h>
 
 #include <asm/set_memory.h>
+#include <asm/cpu_device_id.h>
 #include <asm/e820/api.h>
 #include <asm/init.h>
 #include <asm/page.h>
@@ -261,6 +262,24 @@ static void __init probe_page_size_mask(void)
 	}
 }
 
+#define INTEL_MATCH(_model) { .vendor  = X86_VENDOR_INTEL,	\
+			      .family  = 6,			\
+			      .model = _model,			\
+			    }
+/*
+ * INVLPG may not properly flush Global entries
+ * on these CPUs when PCIDs are enabled.
+ */
+static const struct x86_cpu_id invlpg_miss_ids[] = {
+	INTEL_MATCH(INTEL_FAM6_ALDERLAKE   ),
+	INTEL_MATCH(INTEL_FAM6_ALDERLAKE_L ),
+	INTEL_MATCH(INTEL_FAM6_ALDERLAKE_N ),
+	INTEL_MATCH(INTEL_FAM6_RAPTORLAKE  ),
+	INTEL_MATCH(INTEL_FAM6_RAPTORLAKE_P),
+	INTEL_MATCH(INTEL_FAM6_RAPTORLAKE_S),
+	{}
+};
+
 static void setup_pcid(void)
 {
 	if (!IS_ENABLED(CONFIG_X86_64))
@@ -269,6 +288,12 @@ static void setup_pcid(void)
 	if (!boot_cpu_has(X86_FEATURE_PCID))
 		return;
 
+	if (x86_match_cpu(invlpg_miss_ids)) {
+		pr_info("Incomplete global flushes, disabling PCID");
+		setup_clear_cpu_cap(X86_FEATURE_PCID);
+		return;
+	}
+
 	if (boot_cpu_has(X86_FEATURE_PGE)) {
 		/*
 		 * This can't be cr4_set_bits_and_update_boot() -- the