ARM: Device-tree updates

New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST + Reference boards for stm32mp15 - ST Ericsson + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based) -----BEGIN PGP SIGNATURE----- iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl4+kmIPHG9sb2ZAbGl4 b20ubmV0AAoJEIwa5zzehBx3WIIP/2Nbbe0AKMbWK4tr53UffdZ+/voO5zp/M6Eq 6yeUmbMYSLqq4N3jRpFGoEnIPUVccLKffIi5EjdFygVl3C6D54O4IhgHPh4jBvWJ wr+vKpbNX6wekI2/LoHRnNTKz4xX2RcmW7eI/2RGvJgL3/7jaXm9g9QqZHf1Ne0T /JHEkl2xkgbIvgQ8UCTB38VHQKe2FdC6bzGRDttBJOv5NJvQScZSqyS91iiB0IWe uYMSI9A/k2LMgTDA+QD6uaL4U3RO2fxmMOTQI72QKLgLePaoUyG844R3RGsU1axc n9MiazspS6V/c3zsfJAUU6MQivD0arBWJrkb8CCVDIW6Az8QhR/0HnkvcwUXPd35 tzhCX0idJb3z7TKVx+SWuFDnmVma9g9nplEPcQc2MSaQxnwG0Xulxgsp1Pq69xZ5 mh+k065Xdk4J7MENNQpBtlpfUUX8f9doIz7zA4LpLTQEXBdgy1TtPMdMrzdbhH5u T/a29u8CubJjhBoZ70P6LabvtMVOmZYhi46hhdEylfINYnOKOQq7uokJU6SV5Vha cYZFuNzhAk2PsujDpoYQPY1eqjoKbzheBRtunNJ9or+ALWO/NRXq+9QdUW4CnSXo xy3dXMj2vJ4B+3XRuxEcFhS/L9nJsf5YyPs8xjaYmcy1BMcH2mJz3e8s0+ayUk1t QjU6sWVt =Upyw -----END PGP SIGNATURE----- Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
2020-02-08 13:58:44 -08:00 · 2020-02-08 13:58:44 -08:00 · 1afa9c3b7c
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@ -59,6 +59,7 @@ properties:
              - friendlyarm,nanopi-k2
              - hardkernel,odroid-c2
              - nexbox,a95x
+              - videostrong,kii-pro
              - wetek,hub
              - wetek,play2
          - const: amlogic,meson-gxbb
@ -104,6 +105,7 @@ properties:
          - enum:
              - amlogic,p230
              - amlogic,p231
+              - libretech,aml-s905d-pc
              - phicomm,n1
          - const: amlogic,s905d
          - const: amlogic,meson-gxl
@ -115,6 +117,7 @@ properties:
              - amlogic,q201
              - khadas,vim2
              - kingnovel,r-box-pro
+              - libretech,aml-s912-pc
              - nexbox,a1
              - tronsmart,vega-s96
          - const: amlogic,s912
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@ -35,6 +35,16 @@ properties:
              - atmel,at91sam9x60
          - const: atmel,at91sam9

+      - items:
+          - enum:
+              - overkiz,kizboxmini-base # Overkiz kizbox Mini Base Board
+              - overkiz,kizboxmini-mb   # Overkiz kizbox Mini Mother Board
+              - overkiz,kizboxmini-rd   # Overkiz kizbox Mini RailDIN
+              - overkiz,smartkiz        # Overkiz SmartKiz Board
+          - const: atmel,at91sam9g25
+          - const: atmel,at91sam9x5
+          - const: atmel,at91sam9
+
      - items:
          - enum:
              - atmel,at91sam9g15
@ -52,11 +62,32 @@ properties:
          - const: atmel,sama5d2
          - const: atmel,sama5

+      - description: Microchip SAMA5D27 WLSOM1
+        items:
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
+      - description: Microchip SAMA5D27 WLSOM1 Evaluation Kit
+        items:
+          - const: microchip,sama5d27-wlsom1-ek
+          - const: microchip,sama5d27-wlsom1
+          - const: atmel,sama5d27
+          - const: atmel,sama5d2
+          - const: atmel,sama5
+
      - items:
          - const: atmel,sama5d27
          - const: atmel,sama5d2
          - const: atmel,sama5

+      - description: SAM9X60-EK board
+        items:
+          - const: microchip,sam9x60ek
+          - const: microchip,sam9x60
+          - const: atmel,at91sam9
+
      - description: Nattis v2 board with Natte v2 power board
        items:
          - const: axentia,nattis-2
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@ -45,6 +45,7 @@ RAMC SDRAM/DDR Controller required properties:
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc"
 - reg: Should contain registers location and length

 Examples:
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@ -128,6 +128,27 @@ properties:
              - variscite,dt6customboard
          - const: fsl,imx6q

+      - description: i.MX6Q Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6q-gw51xx
+              - gw,imx6q-gw52xx
+              - gw,imx6q-gw53xx
+              - gw,imx6q-gw5400-a
+              - gw,imx6q-gw54xx
+              - gw,imx6q-gw551x
+              - gw,imx6q-gw552x
+              - gw,imx6q-gw553x
+              - gw,imx6q-gw560x
+              - gw,imx6q-gw5903
+              - gw,imx6q-gw5904
+              - gw,imx6q-gw5907
+              - gw,imx6q-gw5910
+              - gw,imx6q-gw5912
+              - gw,imx6q-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6q
+
      - description: i.MX6QP based Boards
        items:
          - enum:
@ -154,10 +175,31 @@ properties:
              - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
          - const: fsl,imx6dl

+      - description: i.MX6DL Gateworks Ventana Boards
+        items:
+          - enum:
+              - gw,imx6dl-gw51xx
+              - gw,imx6dl-gw52xx
+              - gw,imx6dl-gw53xx
+              - gw,imx6dl-gw54xx
+              - gw,imx6dl-gw551x
+              - gw,imx6dl-gw552x
+              - gw,imx6dl-gw553x
+              - gw,imx6dl-gw560x
+              - gw,imx6dl-gw5903
+              - gw,imx6dl-gw5904
+              - gw,imx6dl-gw5907
+              - gw,imx6dl-gw5910
+              - gw,imx6dl-gw5912
+              - gw,imx6dl-gw5913
+          - const: gw,ventana
+          - const: fsl,imx6dl
+
      - description: i.MX6SL based Boards
        items:
          - enum:
              - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,tolino-shine3
          - const: fsl,imx6sl

      - description: i.MX6SLL based Boards
@ -172,6 +214,7 @@ properties:
          - enum:
              - fsl,imx6sx-sabreauto      # i.MX6 SoloX Sabre Auto Board
              - fsl,imx6sx-sdb            # i.MX6 SoloX SDB Board
+              - fsl,imx6sx-sdb-reva       # i.MX6 SoloX SDB Rev-A Board
          - const: fsl,imx6sx

      - description: i.MX6UL based Boards
@ -239,6 +282,7 @@ properties:
        items:
          - enum:
              - fsl,imx7d-sdb             # i.MX7 SabreSD Board
+              - fsl,imx7d-sdb-reva        # i.MX7 SabreSD Rev-A Board
              - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
              - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
              - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
@ -263,6 +307,7 @@ properties:
      - description: i.MX7ULP based Boards
        items:
          - enum:
+              - ea,imx7ulp-com           # i.MX7ULP Embedded Artists COM Board
              - fsl,imx7ulp-evk           # i.MX7ULP Evaluation Kit
          - const: fsl,imx7ulp

@ -283,7 +328,9 @@ properties:
        items:
          - enum:
              - boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
+              - einfochips,imx8mq-thor96  # i.MX8MQ Thor96 Board
              - fsl,imx8mq-evk            # i.MX8MQ EVK Board
+              - google,imx8mq-phanbell    # Google Coral Edge TPU
              - purism,librem5-devkit     # Purism Librem5 devkit
              - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
              - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
@ -385,6 +432,13 @@ properties:
              - fsl,ls2088a-rdb
          - const: fsl,ls2088a

+      - description: LX2160A based Boards
+        items:
+          - enum:
+              - fsl,lx2160a-qds
+              - fsl,lx2160a-rdb
+          - const: fsl,lx2160a
+
      - description: S32V234 based Boards
        items:
          - enum:
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@ -24,28 +24,30 @@ description: |

  The 'SoC' element must be one of the following strings:

-  	apq8016
-  	apq8074
-  	apq8084
-  	apq8096
-  	msm8916
-  	msm8974
-  	msm8992
-  	msm8994
-  	msm8996
-  	mdm9615
-  	ipq8074
-  	sdm845
+        apq8016
+        apq8074
+        apq8084
+        apq8096
+        ipq8074
+        mdm9615
+        msm8916
+        msm8974
+        msm8992
+        msm8994
+        msm8996
+        sc7180
+        sdm845

  The 'board' element must be one of the following strings:

-  	cdp
-  	liquid
-  	dragonboard
-  	mtp
-  	sbc
-  	hk01
-  	qrd
+        cdp
+        dragonboard
+        hk01
+        idp
+        liquid
+        mtp
+        qrd
+        sbc

  The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
  where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@ -144,4 +146,8 @@ properties:
              - qcom,ipq8074-hk01
          - const: qcom,ipq8074

+      - items:
+          - enum:
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
 ...
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@ -409,6 +409,9 @@ properties:

      - description: Pine64 RockPro64
        items:
+          - enum:
+              - pine64,rockpro64-v2.1
+              - pine64,rockpro64-v2.0
          - const: pine64,rockpro64
          - const: rockchip,rk3399

@ -422,6 +425,12 @@ properties:
          - const: radxa,rockpi4
          - const: rockchip,rk3399

+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
+
      - description: Radxa Rock2 Square
        items:
          - const: radxa,rock2-square
--- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@ -2,7 +2,7 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/sprd.yaml#
+$id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Unisoc platforms device tree bindings
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@ -342,6 +342,16 @@ properties:
          - const: libretech,all-h3-cc-h5
          - const: allwinner,sun50i-h5

+      - description: Libre Computer Board ALL-H3-IT H5
+        items:
+          - const: libretech,all-h3-it-h5
+          - const: allwinner,sun50i-h5
+
+      - description: Libre Computer Board ALL-H5-CC H5
+        items:
+          - const: libretech,all-h5-cc-h5
+          - const: allwinner,sun50i-h5
+
      - description: Lichee Pi One
        items:
          - const: licheepi,licheepi-one
@ -470,6 +480,12 @@ properties:
          - const: emlid,neutis-n5
          - const: allwinner,sun50i-h5

+      - description: Emlid Neutis N5H3 Developper Board
+        items:
+          - const: emlid,neutis-n5h3-devboard
+          - const: emlid,neutis-n5h3
+          - const: allwinner,sun8i-h3
+
      - description: NextThing Co. CHIP
        items:
          - const: nextthing,chip
@ -599,11 +615,16 @@ properties:
          - const: pine64,pine64-plus
          - const: allwinner,sun50i-a64

-      - description: Pine64 PineH64
+      - description: Pine64 PineH64 model A
        items:
          - const: pine64,pine-h64
          - const: allwinner,sun50i-h6

+      - description: Pine64 PineH64 model B
+        items:
+          - const: pine64,pine-h64-model-b
+          - const: allwinner,sun50i-h6
+
      - description: Pine64 LTS
        items:
          - const: pine64,pine64-lts
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/ux500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ux500 platforms device tree bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: ST-Ericsson HREF (pre-v60)
+        items:
+          - const: st-ericsson,mop500
+          - const: st-ericsson,u8500
+
+      - description: ST-Ericsson HREF (v60+)
+        items:
+          - const: st-ericsson,hrefv60+
+          - const: st-ericsson,u8500
+
+      - description: Calao Systems Snowball
+        items:
+          - const: calaosystems,snowball-a9500
+          - const: st-ericsson,u9500
+
+      - description: Samsung Galaxy S III mini (GT-I8190)
+        items:
+          - const: samsung,golden
+          - const: st-ericsson,u8500
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - const: allwinner,sun8i-a83t-de2-clk
+      - const: allwinner,sun8i-h3-de2-clk
+      - const: allwinner,sun8i-v3s-de2-clk
+      - const: allwinner,sun50i-a64-de2-clk
+      - const: allwinner,sun50i-h5-de2-clk
+      - const: allwinner,sun50i-h6-de2-clk
+      - items:
+          - const: allwinner,sun8i-r40-de2-clk
+          - const: allwinner,sun8i-h3-de2-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun8i-h3-ccu.h>
+    #include <dt-bindings/reset/sun8i-h3-ccu.h>
+
+    de2_clocks: clock@1000000 {
+        compatible = "allwinner,sun8i-h3-de2-clk";
+        reg = <0x01000000 0x100000>;
+        clocks = <&ccu CLK_BUS_DE>,
+                 <&ccu CLK_DE>;
+        clock-names = "bus",
+                      "mod";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-de-clks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: RAM Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: mod
+      - const: dram
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+    #include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+    de_clocks: clock@3000000 {
+        compatible = "allwinner,sun9i-a80-de-clks";
+        reg = <0x03000000 0x30>;
+        clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+        clock-names = "mod", "dram", "bus";
+        resets = <&ccu RST_BUS_DE>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clocks.yaml
@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 USB Clock Controller Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  compatible:
+    const: allwinner,sun9i-a80-usb-clocks
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: High Frequency Oscillator
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hosc
+
+required:
+  - "#clock-cells"
+  - "#reset-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun9i-a80-ccu.h>
+
+    usb_clocks: clock@a08000 {
+        compatible = "allwinner,sun9i-a80-usb-clks";
+        reg = <0x00a08000 0x8>;
+        clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+        clock-names = "bus", "hosc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt
+++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
@ -1,34 +0,0 @@
-Allwinner Display Engine 2.0/3.0 Clock Control Binding
------------------------------------------------------
-
-Required properties :
- compatible: must contain one of the following compatibles:
-		- "allwinner,sun8i-a83t-de2-clk"
-		- "allwinner,sun8i-h3-de2-clk"
-		- "allwinner,sun8i-v3s-de2-clk"
-		- "allwinner,sun50i-a64-de2-clk"
-		- "allwinner,sun50i-h5-de2-clk"
-		- "allwinner,sun50i-h6-de3-clk"
-
- reg: Must contain the registers base address and length
- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock (on A83T it's the DE PLL)
-  - "bus": the bus clock for the whole display engine subsystem
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset control for the display engine subsystem.
- #clock-cells : must contain 1
- #reset-cells : must contain 1
-
-Example:
-de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-h3-de2-clk";
-	reg = <0x01000000 0x100000>;
-	clocks = <&ccu CLK_BUS_DE>,
-		 <&ccu CLK_DE>;
-	clock-names = "bus",
-		      "mod";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
--- a/Documentation/devicetree/bindings/clock/sun9i-de.txt
+++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
@ -1,28 +0,0 @@
-Allwinner A80 Display Engine Clock Control Binding
--------------------------------------------------
-
-Required properties :
- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-de-clks"
-
- reg: Must contain the registers base address and length
- clocks: phandle to the clocks feeding the display engine subsystem.
-	  Three are needed:
-  - "mod": the display engine module clock
-  - "dram": the DRAM bus clock for the system
-  - "bus": the bus clock for the whole display engine subsystem
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset control for the display engine subsystem.
- #clock-cells : must contain 1
- #reset-cells : must contain 1
-
-Example:
-de_clocks: clock@3000000 {
-	compatible = "allwinner,sun9i-a80-de-clks";
-	reg = <0x03000000 0x30>;
-	clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
-	clock-names = "mod", "dram", "bus";
-	resets = <&ccu RST_BUS_DE>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
--- a/Documentation/devicetree/bindings/clock/sun9i-usb.txt
+++ b/Documentation/devicetree/bindings/clock/sun9i-usb.txt
@ -1,24 +0,0 @@
-Allwinner A80 USB Clock Control Binding
---------------------------------------
-
-Required properties :
- compatible: must contain one of the following compatibles:
-		- "allwinner,sun9i-a80-usb-clocks"
-
- reg: Must contain the registers base address and length
- clocks: phandle to the clocks feeding the USB subsystem. Two are needed:
-  - "bus": the bus clock for the whole USB subsystem
-  - "hosc": the high frequency oscillator (usually at 24MHz)
- clock-names: Must contain the clock names described just above
- #clock-cells : must contain 1
- #reset-cells : must contain 1
-
-Example:
-usb_clocks: clock@a08000 {
-	compatible = "allwinner,sun9i-a80-usb-clks";
-	reg = <0x00a08000 0x8>;
-	clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
-	clock-names = "bus", "hosc";
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ b/Documentation/devicetree/bindings/display/mxsfb.txt
@ -6,6 +6,7 @@ Required properties:
 - compatible:	Should be "fsl,imx23-lcdif" for i.MX23.
 		Should be "fsl,imx28-lcdif" for i.MX28.
 		Should be "fsl,imx6sx-lcdif" for i.MX6SX.
+		Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
 - reg:		Address and length of the register set for LCDIF
 - interrupts:	Should contain LCDIF interrupt
 - clocks:	A list of phandle + clock-specifier pairs, one for each
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@ -2,9 +2,7 @@

 * XDMA Controller
 Required properties:
- compatible: Should be "atmel,<chip>-dma".
-  <chip> compatible description:
-  - sama5d4: first SoC adding the XDMAC
+- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@ -18,6 +18,7 @@ properties:
      - enum:
          - amlogic,meson-g12a-mali
          - realtek,rtd1619-mali
+          - rockchip,px30-mali
      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable

  reg:
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@ -1,7 +1,7 @@
 * AT91 SAMA5D2 Analog to Digital Converter (ADC)

 Required properties:
-  - compatible: Should be "atmel,sama5d2-adc".
+  - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
  - reg: Should contain ADC registers location and length.
  - interrupts: Should contain the IRQ line for the ADC.
  - clocks: phandle to device clock.
--- a/Documentation/devicetree/bindings/media/atmel-isi.txt
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
 ----------------------------------

 Required properties for ISI:
- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
 - reg: physical base address and length of the registers set for the device.
 - interrupts: should contain IRQ line for the ISI.
 - clocks: list of clock specifiers, corresponding to entries in the clock-names
--- a/Documentation/devicetree/bindings/media/fsl-pxp.txt
+++ b/Documentation/devicetree/bindings/media/fsl-pxp.txt
@ -8,7 +8,7 @@ i.MX SoCs from i.MX23 to i.MX7.

 Required properties:
 - compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
-  imx6dl, imx6sl, imx6ul, imx6sx, imx6ull, or imx7d.
+  imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
 - reg: the register base and size for the device registers
 - interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
 - clock-names: should be "axi"
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@ -123,6 +123,7 @@ properties:
          - rc-su3000
          - rc-tango
          - rc-tanix-tx3mini
+          - rc-tanix-tx5max
          - rc-tbs-nec
          - rc-technisat-ts35
          - rc-technisat-usb2
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt
@ -1,374 +0,0 @@
-NVIDIA Tegra124 SoC EMC (external memory controller)
-====================================================
-
-Required properties :
- compatible : Should be "nvidia,tegra124-emc".
- reg : physical base address and length of the controller's registers.
- nvidia,memory-controller : phandle of the MC driver.
-
-The node should contain a "emc-timings" subnode for each supported RAM type
-(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
-being its RAM_CODE.
-
-Required properties for "emc-timings" nodes :
- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
-used for.
-
-Each "emc-timings" node should contain a "timing" subnode for every supported
-EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
-their unit address.
-
-Required properties for "timing" nodes :
- clock-frequency : Should contain the memory clock rate in Hz.
- The following properties contain EMC timing characterization values
-(specified in the board documentation) :
-  - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
-  - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
-  - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
-  - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
-  - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
-  - nvidia,emc-cfg : EMC_CFG
-  - nvidia,emc-cfg-2 : EMC_CFG_2
-  - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
-  - nvidia,emc-mode-1 : Mode Register 1
-  - nvidia,emc-mode-2 : Mode Register 2
-  - nvidia,emc-mode-4 : Mode Register 4
-  - nvidia,emc-mode-reset : Mode Register 0
-  - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
-  - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
-  - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
-  - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
-  - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
- nvidia,emc-configuration : EMC timing characterization data. These are the
-registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
-be specified, according to the board documentation:
-
-	EMC_RC
-	EMC_RFC
-	EMC_RFC_SLR
-	EMC_RAS
-	EMC_RP
-	EMC_R2W
-	EMC_W2R
-	EMC_R2P
-	EMC_W2P
-	EMC_RD_RCD
-	EMC_WR_RCD
-	EMC_RRD
-	EMC_REXT
-	EMC_WEXT
-	EMC_WDV
-	EMC_WDV_MASK
-	EMC_QUSE
-	EMC_QUSE_WIDTH
-	EMC_IBDLY
-	EMC_EINPUT
-	EMC_EINPUT_DURATION
-	EMC_PUTERM_EXTRA
-	EMC_PUTERM_WIDTH
-	EMC_PUTERM_ADJ
-	EMC_CDB_CNTL_1
-	EMC_CDB_CNTL_2
-	EMC_CDB_CNTL_3
-	EMC_QRST
-	EMC_QSAFE
-	EMC_RDV
-	EMC_RDV_MASK
-	EMC_REFRESH
-	EMC_BURST_REFRESH_NUM
-	EMC_PRE_REFRESH_REQ_CNT
-	EMC_PDEX2WR
-	EMC_PDEX2RD
-	EMC_PCHG2PDEN
-	EMC_ACT2PDEN
-	EMC_AR2PDEN
-	EMC_RW2PDEN
-	EMC_TXSR
-	EMC_TXSRDLL
-	EMC_TCKE
-	EMC_TCKESR
-	EMC_TPD
-	EMC_TFAW
-	EMC_TRPAB
-	EMC_TCLKSTABLE
-	EMC_TCLKSTOP
-	EMC_TREFBW
-	EMC_FBIO_CFG6
-	EMC_ODT_WRITE
-	EMC_ODT_READ
-	EMC_FBIO_CFG5
-	EMC_CFG_DIG_DLL
-	EMC_CFG_DIG_DLL_PERIOD
-	EMC_DLL_XFORM_DQS0
-	EMC_DLL_XFORM_DQS1
-	EMC_DLL_XFORM_DQS2
-	EMC_DLL_XFORM_DQS3
-	EMC_DLL_XFORM_DQS4
-	EMC_DLL_XFORM_DQS5
-	EMC_DLL_XFORM_DQS6
-	EMC_DLL_XFORM_DQS7
-	EMC_DLL_XFORM_DQS8
-	EMC_DLL_XFORM_DQS9
-	EMC_DLL_XFORM_DQS10
-	EMC_DLL_XFORM_DQS11
-	EMC_DLL_XFORM_DQS12
-	EMC_DLL_XFORM_DQS13
-	EMC_DLL_XFORM_DQS14
-	EMC_DLL_XFORM_DQS15
-	EMC_DLL_XFORM_QUSE0
-	EMC_DLL_XFORM_QUSE1
-	EMC_DLL_XFORM_QUSE2
-	EMC_DLL_XFORM_QUSE3
-	EMC_DLL_XFORM_QUSE4
-	EMC_DLL_XFORM_QUSE5
-	EMC_DLL_XFORM_QUSE6
-	EMC_DLL_XFORM_QUSE7
-	EMC_DLL_XFORM_ADDR0
-	EMC_DLL_XFORM_ADDR1
-	EMC_DLL_XFORM_ADDR2
-	EMC_DLL_XFORM_ADDR3
-	EMC_DLL_XFORM_ADDR4
-	EMC_DLL_XFORM_ADDR5
-	EMC_DLL_XFORM_QUSE8
-	EMC_DLL_XFORM_QUSE9
-	EMC_DLL_XFORM_QUSE10
-	EMC_DLL_XFORM_QUSE11
-	EMC_DLL_XFORM_QUSE12
-	EMC_DLL_XFORM_QUSE13
-	EMC_DLL_XFORM_QUSE14
-	EMC_DLL_XFORM_QUSE15
-	EMC_DLI_TRIM_TXDQS0
-	EMC_DLI_TRIM_TXDQS1
-	EMC_DLI_TRIM_TXDQS2
-	EMC_DLI_TRIM_TXDQS3
-	EMC_DLI_TRIM_TXDQS4
-	EMC_DLI_TRIM_TXDQS5
-	EMC_DLI_TRIM_TXDQS6
-	EMC_DLI_TRIM_TXDQS7
-	EMC_DLI_TRIM_TXDQS8
-	EMC_DLI_TRIM_TXDQS9
-	EMC_DLI_TRIM_TXDQS10
-	EMC_DLI_TRIM_TXDQS11
-	EMC_DLI_TRIM_TXDQS12
-	EMC_DLI_TRIM_TXDQS13
-	EMC_DLI_TRIM_TXDQS14
-	EMC_DLI_TRIM_TXDQS15
-	EMC_DLL_XFORM_DQ0
-	EMC_DLL_XFORM_DQ1
-	EMC_DLL_XFORM_DQ2
-	EMC_DLL_XFORM_DQ3
-	EMC_DLL_XFORM_DQ4
-	EMC_DLL_XFORM_DQ5
-	EMC_DLL_XFORM_DQ6
-	EMC_DLL_XFORM_DQ7
-	EMC_XM2CMDPADCTRL
-	EMC_XM2CMDPADCTRL4
-	EMC_XM2CMDPADCTRL5
-	EMC_XM2DQPADCTRL2
-	EMC_XM2DQPADCTRL3
-	EMC_XM2CLKPADCTRL
-	EMC_XM2CLKPADCTRL2
-	EMC_XM2COMPPADCTRL
-	EMC_XM2VTTGENPADCTRL
-	EMC_XM2VTTGENPADCTRL2
-	EMC_XM2VTTGENPADCTRL3
-	EMC_XM2DQSPADCTRL3
-	EMC_XM2DQSPADCTRL4
-	EMC_XM2DQSPADCTRL5
-	EMC_XM2DQSPADCTRL6
-	EMC_DSR_VTTGEN_DRV
-	EMC_TXDSRVTTGEN
-	EMC_FBIO_SPARE
-	EMC_ZCAL_WAIT_CNT
-	EMC_MRS_WAIT_CNT2
-	EMC_CTT
-	EMC_CTT_DURATION
-	EMC_CFG_PIPE
-	EMC_DYN_SELF_REF_CONTROL
-	EMC_QPOP
-
-Example SoC include file:
-
-/ {
-	emc@7001b000 {
-		compatible = "nvidia,tegra124-emc";
-		reg = <0x0 0x7001b000 0x0 0x1000>;
-
-		nvidia,memory-controller = <&mc>;
-	};
-};
-
-Example board file:
-
-/ {
-	emc@7001b000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emc-zcal-cnt-long = <0x00000042>;
-				nvidia,emc-auto-cal-interval = <0x001fffff>;
-				nvidia,emc-ctt-term-ctrl = <0x00000802>;
-				nvidia,emc-cfg = <0x73240000>;
-				nvidia,emc-cfg-2 = <0x000008c5>;
-				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
-				nvidia,emc-bgbias-ctl0 = <0x00000008>;
-				nvidia,emc-auto-cal-config = <0xa1430000>;
-				nvidia,emc-auto-cal-config2 = <0x00000000>;
-				nvidia,emc-auto-cal-config3 = <0x00000000>;
-				nvidia,emc-mode-reset = <0x80001221>;
-				nvidia,emc-mode-1 = <0x80100003>;
-				nvidia,emc-mode-2 = <0x80200008>;
-				nvidia,emc-mode-4 = <0x00000000>;
-
-				nvidia,emc-configuration = <
-					0x00000000 /* EMC_RC */
-					0x00000003 /* EMC_RFC */
-					0x00000000 /* EMC_RFC_SLR */
-					0x00000000 /* EMC_RAS */
-					0x00000000 /* EMC_RP */
-					0x00000004 /* EMC_R2W */
-					0x0000000a /* EMC_W2R */
-					0x00000003 /* EMC_R2P */
-					0x0000000b /* EMC_W2P */
-					0x00000000 /* EMC_RD_RCD */
-					0x00000000 /* EMC_WR_RCD */
-					0x00000003 /* EMC_RRD */
-					0x00000003 /* EMC_REXT */
-					0x00000000 /* EMC_WEXT */
-					0x00000006 /* EMC_WDV */
-					0x00000006 /* EMC_WDV_MASK */
-					0x00000006 /* EMC_QUSE */
-					0x00000002 /* EMC_QUSE_WIDTH */
-					0x00000000 /* EMC_IBDLY */
-					0x00000005 /* EMC_EINPUT */
-					0x00000005 /* EMC_EINPUT_DURATION */
-					0x00010000 /* EMC_PUTERM_EXTRA */
-					0x00000003 /* EMC_PUTERM_WIDTH */
-					0x00000000 /* EMC_PUTERM_ADJ */
-					0x00000000 /* EMC_CDB_CNTL_1 */
-					0x00000000 /* EMC_CDB_CNTL_2 */
-					0x00000000 /* EMC_CDB_CNTL_3 */
-					0x00000004 /* EMC_QRST */
-					0x0000000c /* EMC_QSAFE */
-					0x0000000d /* EMC_RDV */
-					0x0000000f /* EMC_RDV_MASK */
-					0x00000060 /* EMC_REFRESH */
-					0x00000000 /* EMC_BURST_REFRESH_NUM */
-					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
-					0x00000002 /* EMC_PDEX2WR */
-					0x00000002 /* EMC_PDEX2RD */
-					0x00000001 /* EMC_PCHG2PDEN */
-					0x00000000 /* EMC_ACT2PDEN */
-					0x00000007 /* EMC_AR2PDEN */
-					0x0000000f /* EMC_RW2PDEN */
-					0x00000005 /* EMC_TXSR */
-					0x00000005 /* EMC_TXSRDLL */
-					0x00000004 /* EMC_TCKE */
-					0x00000005 /* EMC_TCKESR */
-					0x00000004 /* EMC_TPD */
-					0x00000000 /* EMC_TFAW */
-					0x00000000 /* EMC_TRPAB */
-					0x00000005 /* EMC_TCLKSTABLE */
-					0x00000005 /* EMC_TCLKSTOP */
-					0x00000064 /* EMC_TREFBW */
-					0x00000000 /* EMC_FBIO_CFG6 */
-					0x00000000 /* EMC_ODT_WRITE */
-					0x00000000 /* EMC_ODT_READ */
-					0x106aa298 /* EMC_FBIO_CFG5 */
-					0x002c00a0 /* EMC_CFG_DIG_DLL */
-					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-					0x00064000 /* EMC_DLL_XFORM_DQS0 */
-					0x00064000 /* EMC_DLL_XFORM_DQS1 */
-					0x00064000 /* EMC_DLL_XFORM_DQS2 */
-					0x00064000 /* EMC_DLL_XFORM_DQS3 */
-					0x00064000 /* EMC_DLL_XFORM_DQS4 */
-					0x00064000 /* EMC_DLL_XFORM_DQS5 */
-					0x00064000 /* EMC_DLL_XFORM_DQS6 */
-					0x00064000 /* EMC_DLL_XFORM_DQS7 */
-					0x00064000 /* EMC_DLL_XFORM_DQS8 */
-					0x00064000 /* EMC_DLL_XFORM_DQS9 */
-					0x00064000 /* EMC_DLL_XFORM_DQS10 */
-					0x00064000 /* EMC_DLL_XFORM_DQS11 */
-					0x00064000 /* EMC_DLL_XFORM_DQS12 */
-					0x00064000 /* EMC_DLL_XFORM_DQS13 */
-					0x00064000 /* EMC_DLL_XFORM_DQS14 */
-					0x00064000 /* EMC_DLL_XFORM_DQS15 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
-					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
-					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
-					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
-					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
-					0x10000280 /* EMC_XM2CMDPADCTRL */
-					0x00000000 /* EMC_XM2CMDPADCTRL4 */
-					0x00111111 /* EMC_XM2CMDPADCTRL5 */
-					0x00000000 /* EMC_XM2DQPADCTRL2 */
-					0x00000000 /* EMC_XM2DQPADCTRL3 */
-					0x77ffc081 /* EMC_XM2CLKPADCTRL */
-					0x00000e0e /* EMC_XM2CLKPADCTRL2 */
-					0x81f1f108 /* EMC_XM2COMPPADCTRL */
-					0x07070004 /* EMC_XM2VTTGENPADCTRL */
-					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
-					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
-					0x51451400 /* EMC_XM2DQSPADCTRL3 */
-					0x00514514 /* EMC_XM2DQSPADCTRL4 */
-					0x00514514 /* EMC_XM2DQSPADCTRL5 */
-					0x51451400 /* EMC_XM2DQSPADCTRL6 */
-					0x0000003f /* EMC_DSR_VTTGEN_DRV */
-					0x00000007 /* EMC_TXDSRVTTGEN */
-					0x00000000 /* EMC_FBIO_SPARE */
-					0x00000042 /* EMC_ZCAL_WAIT_CNT */
-					0x000e000e /* EMC_MRS_WAIT_CNT2 */
-					0x00000000 /* EMC_CTT */
-					0x00000003 /* EMC_CTT_DURATION */
-					0x0000f2f3 /* EMC_CFG_PIPE */
-					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
-					0x0000000a /* EMC_QPOP */
-				>;
-			};
-		};
-	};
-};
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@ -0,0 +1,528 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra124-emc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 SoC External Memory Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The EMC interfaces with the off-chip SDRAM to service the request stream
+  sent from the memory controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra124-emc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: external memory clock
+
+  clock-names:
+    items:
+      - const: emc
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of the memory controller node
+
+patternProperties:
+  "^emc-timings-[0-9]+$":
+    type: object
+    properties:
+      nvidia,ram-code:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          value of the RAM_CODE field in the PMC_STRAPPING_OPT_A register that
+          this timing set is used for
+
+    patternProperties:
+      "^timing-[0-9]+$":
+        type: object
+        properties:
+          clock-frequency:
+            description:
+              external memory clock rate in Hz
+            minimum: 1000000
+            maximum: 1000000000
+
+          nvidia,emc-auto-cal-config:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG2 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-config3:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_AUTO_CAL_CONFIG3 register for this set of
+              timings
+
+          nvidia,emc-auto-cal-interval:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              pad calibration interval in microseconds
+            minimum: 0
+            maximum: 2097151
+
+          nvidia,emc-bgbias-ctl0:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_BGBIAS_CTL0 register for this set of timings
+
+          nvidia,emc-cfg:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG register for this set of timings
+
+          nvidia,emc-cfg-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CFG_2 register for this set of timings
+
+          nvidia,emc-ctt-term-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_CTT_TERM_CTRL register for this set of timings
+
+          nvidia,emc-mode-1:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW register for this set of timings
+
+          nvidia,emc-mode-2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW2 register for this set of timings
+
+          nvidia,emc-mode-4:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_MRW4 register for this set of timings
+
+          nvidia,emc-mode-reset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              reset value of the EMC_MRS register for this set of timings
+
+          nvidia,emc-mrs-wait-cnt:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMR_MRS_WAIT_CNT register for this set of timings
+
+          nvidia,emc-sel-dpd-ctrl:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_SEL_DPD_CTRL register for this set of timings
+
+          nvidia,emc-xm2dqspadctrl2:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_XM2DQSPADCTRL2 register for this set of timings
+
+          nvidia,emc-zcal-cnt-long:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              number of EMC clocks to wait before issuing any commands after
+              clock change
+            minimum: 0
+            maximum: 1023
+
+          nvidia,emc-zcal-interval:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              value of the EMC_ZCAL_INTERVAL register for this set of timings
+
+          nvidia,emc-configuration:
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32-array
+            description:
+              EMC timing characterization data. These are the registers (see
+              section "15.6.2 EMC Registers" in the TRM) whose values need to
+              be specified, according to the board documentation.
+            items:
+              - description: EMC_RC
+              - description: EMC_RFC
+              - description: EMC_RFC_SLR
+              - description: EMC_RAS
+              - description: EMC_RP
+              - description: EMC_R2W
+              - description: EMC_W2R
+              - description: EMC_R2P
+              - description: EMC_W2P
+              - description: EMC_RD_RCD
+              - description: EMC_WR_RCD
+              - description: EMC_RRD
+              - description: EMC_REXT
+              - description: EMC_WEXT
+              - description: EMC_WDV
+              - description: EMC_WDV_MASK
+              - description: EMC_QUSE
+              - description: EMC_QUSE_WIDTH
+              - description: EMC_IBDLY
+              - description: EMC_EINPUT
+              - description: EMC_EINPUT_DURATION
+              - description: EMC_PUTERM_EXTRA
+              - description: EMC_PUTERM_WIDTH
+              - description: EMC_PUTERM_ADJ
+              - description: EMC_CDB_CNTL_1
+              - description: EMC_CDB_CNTL_2
+              - description: EMC_CDB_CNTL_3
+              - description: EMC_QRST
+              - description: EMC_QSAFE
+              - description: EMC_RDV
+              - description: EMC_RDV_MASK
+              - description: EMC_REFRESH
+              - description: EMC_BURST_REFRESH_NUM
+              - description: EMC_PRE_REFRESH_REQ_CNT
+              - description: EMC_PDEX2WR
+              - description: EMC_PDEX2RD
+              - description: EMC_PCHG2PDEN
+              - description: EMC_ACT2PDEN
+              - description: EMC_AR2PDEN
+              - description: EMC_RW2PDEN
+              - description: EMC_TXSR
+              - description: EMC_TXSRDLL
+              - description: EMC_TCKE
+              - description: EMC_TCKESR
+              - description: EMC_TPD
+              - description: EMC_TFAW
+              - description: EMC_TRPAB
+              - description: EMC_TCLKSTABLE
+              - description: EMC_TCLKSTOP
+              - description: EMC_TREFBW
+              - description: EMC_FBIO_CFG6
+              - description: EMC_ODT_WRITE
+              - description: EMC_ODT_READ
+              - description: EMC_FBIO_CFG5
+              - description: EMC_CFG_DIG_DLL
+              - description: EMC_CFG_DIG_DLL_PERIOD
+              - description: EMC_DLL_XFORM_DQS0
+              - description: EMC_DLL_XFORM_DQS1
+              - description: EMC_DLL_XFORM_DQS2
+              - description: EMC_DLL_XFORM_DQS3
+              - description: EMC_DLL_XFORM_DQS4
+              - description: EMC_DLL_XFORM_DQS5
+              - description: EMC_DLL_XFORM_DQS6
+              - description: EMC_DLL_XFORM_DQS7
+              - description: EMC_DLL_XFORM_DQS8
+              - description: EMC_DLL_XFORM_DQS9
+              - description: EMC_DLL_XFORM_DQS10
+              - description: EMC_DLL_XFORM_DQS11
+              - description: EMC_DLL_XFORM_DQS12
+              - description: EMC_DLL_XFORM_DQS13
+              - description: EMC_DLL_XFORM_DQS14
+              - description: EMC_DLL_XFORM_DQS15
+              - description: EMC_DLL_XFORM_QUSE0
+              - description: EMC_DLL_XFORM_QUSE1
+              - description: EMC_DLL_XFORM_QUSE2
+              - description: EMC_DLL_XFORM_QUSE3
+              - description: EMC_DLL_XFORM_QUSE4
+              - description: EMC_DLL_XFORM_QUSE5
+              - description: EMC_DLL_XFORM_QUSE6
+              - description: EMC_DLL_XFORM_QUSE7
+              - description: EMC_DLL_XFORM_ADDR0
+              - description: EMC_DLL_XFORM_ADDR1
+              - description: EMC_DLL_XFORM_ADDR2
+              - description: EMC_DLL_XFORM_ADDR3
+              - description: EMC_DLL_XFORM_ADDR4
+              - description: EMC_DLL_XFORM_ADDR5
+              - description: EMC_DLL_XFORM_QUSE8
+              - description: EMC_DLL_XFORM_QUSE9
+              - description: EMC_DLL_XFORM_QUSE10
+              - description: EMC_DLL_XFORM_QUSE11
+              - description: EMC_DLL_XFORM_QUSE12
+              - description: EMC_DLL_XFORM_QUSE13
+              - description: EMC_DLL_XFORM_QUSE14
+              - description: EMC_DLL_XFORM_QUSE15
+              - description: EMC_DLI_TRIM_TXDQS0
+              - description: EMC_DLI_TRIM_TXDQS1
+              - description: EMC_DLI_TRIM_TXDQS2
+              - description: EMC_DLI_TRIM_TXDQS3
+              - description: EMC_DLI_TRIM_TXDQS4
+              - description: EMC_DLI_TRIM_TXDQS5
+              - description: EMC_DLI_TRIM_TXDQS6
+              - description: EMC_DLI_TRIM_TXDQS7
+              - description: EMC_DLI_TRIM_TXDQS8
+              - description: EMC_DLI_TRIM_TXDQS9
+              - description: EMC_DLI_TRIM_TXDQS10
+              - description: EMC_DLI_TRIM_TXDQS11
+              - description: EMC_DLI_TRIM_TXDQS12
+              - description: EMC_DLI_TRIM_TXDQS13
+              - description: EMC_DLI_TRIM_TXDQS14
+              - description: EMC_DLI_TRIM_TXDQS15
+              - description: EMC_DLL_XFORM_DQ0
+              - description: EMC_DLL_XFORM_DQ1
+              - description: EMC_DLL_XFORM_DQ2
+              - description: EMC_DLL_XFORM_DQ3
+              - description: EMC_DLL_XFORM_DQ4
+              - description: EMC_DLL_XFORM_DQ5
+              - description: EMC_DLL_XFORM_DQ6
+              - description: EMC_DLL_XFORM_DQ7
+              - description: EMC_XM2CMDPADCTRL
+              - description: EMC_XM2CMDPADCTRL4
+              - description: EMC_XM2CMDPADCTRL5
+              - description: EMC_XM2DQPADCTRL2
+              - description: EMC_XM2DQPADCTRL3
+              - description: EMC_XM2CLKPADCTRL
+              - description: EMC_XM2CLKPADCTRL2
+              - description: EMC_XM2COMPPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL
+              - description: EMC_XM2VTTGENPADCTRL2
+              - description: EMC_XM2VTTGENPADCTRL3
+              - description: EMC_XM2DQSPADCTRL3
+              - description: EMC_XM2DQSPADCTRL4
+              - description: EMC_XM2DQSPADCTRL5
+              - description: EMC_XM2DQSPADCTRL6
+              - description: EMC_DSR_VTTGEN_DRV
+              - description: EMC_TXDSRVTTGEN
+              - description: EMC_FBIO_SPARE
+              - description: EMC_ZCAL_WAIT_CNT
+              - description: EMC_MRS_WAIT_CNT2
+              - description: EMC_CTT
+              - description: EMC_CTT_DURATION
+              - description: EMC_CFG_PIPE
+              - description: EMC_DYN_SELF_REF_CONTROL
+              - description: EMC_QPOP
+
+        required:
+          - clock-frequency
+          - nvidia,emc-auto-cal-config
+          - nvidia,emc-auto-cal-config2
+          - nvidia,emc-auto-cal-config3
+          - nvidia,emc-auto-cal-interval
+          - nvidia,emc-bgbias-ctl0
+          - nvidia,emc-cfg
+          - nvidia,emc-cfg-2
+          - nvidia,emc-ctt-term-ctrl
+          - nvidia,emc-mode-1
+          - nvidia,emc-mode-2
+          - nvidia,emc-mode-4
+          - nvidia,emc-mode-reset
+          - nvidia,emc-mrs-wait-cnt
+          - nvidia,emc-sel-dpd-ctrl
+          - nvidia,emc-xm2dqspadctrl2
+          - nvidia,emc-zcal-cnt-long
+          - nvidia,emc-zcal-interval
+          - nvidia,emc-configuration
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - nvidia,memory-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@70019000 {
+        compatible = "nvidia,tegra124-mc";
+        reg = <0x0 0x70019000 0x0 0x1000>;
+        clocks = <&tegra_car TEGRA124_CLK_MC>;
+        clock-names = "mc";
+
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+        #iommu-cells = <1>;
+    };
+
+    external-memory-controller@7001b000 {
+        compatible = "nvidia,tegra124-emc";
+        reg = <0x0 0x7001b000 0x0 0x1000>;
+        clocks = <&car TEGRA124_CLK_EMC>;
+        clock-names = "emc";
+
+        nvidia,memory-controller = <&mc>;
+
+        emc-timings-0 {
+            nvidia,ram-code = <3>;
+
+            timing-0 {
+                clock-frequency = <12750000>;
+
+                nvidia,emc-zcal-cnt-long = <0x00000042>;
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-ctt-term-ctrl = <0x00000802>;
+                nvidia,emc-cfg = <0x73240000>;
+                nvidia,emc-cfg-2 = <0x000008c5>;
+                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+                nvidia,emc-bgbias-ctl0 = <0x00000008>;
+                nvidia,emc-auto-cal-config = <0xa1430000>;
+                nvidia,emc-auto-cal-config2 = <0x00000000>;
+                nvidia,emc-auto-cal-config3 = <0x00000000>;
+                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-mode-1 = <0x80100003>;
+                nvidia,emc-mode-2 = <0x80200008>;
+                nvidia,emc-mode-4 = <0x00000000>;
+
+                nvidia,emc-configuration = <
+                    0x00000000 /* EMC_RC */
+                    0x00000003 /* EMC_RFC */
+                    0x00000000 /* EMC_RFC_SLR */
+                    0x00000000 /* EMC_RAS */
+                    0x00000000 /* EMC_RP */
+                    0x00000004 /* EMC_R2W */
+                    0x0000000a /* EMC_W2R */
+                    0x00000003 /* EMC_R2P */
+                    0x0000000b /* EMC_W2P */
+                    0x00000000 /* EMC_RD_RCD */
+                    0x00000000 /* EMC_WR_RCD */
+                    0x00000003 /* EMC_RRD */
+                    0x00000003 /* EMC_REXT */
+                    0x00000000 /* EMC_WEXT */
+                    0x00000006 /* EMC_WDV */
+                    0x00000006 /* EMC_WDV_MASK */
+                    0x00000006 /* EMC_QUSE */
+                    0x00000002 /* EMC_QUSE_WIDTH */
+                    0x00000000 /* EMC_IBDLY */
+                    0x00000005 /* EMC_EINPUT */
+                    0x00000005 /* EMC_EINPUT_DURATION */
+                    0x00010000 /* EMC_PUTERM_EXTRA */
+                    0x00000003 /* EMC_PUTERM_WIDTH */
+                    0x00000000 /* EMC_PUTERM_ADJ */
+                    0x00000000 /* EMC_CDB_CNTL_1 */
+                    0x00000000 /* EMC_CDB_CNTL_2 */
+                    0x00000000 /* EMC_CDB_CNTL_3 */
+                    0x00000004 /* EMC_QRST */
+                    0x0000000c /* EMC_QSAFE */
+                    0x0000000d /* EMC_RDV */
+                    0x0000000f /* EMC_RDV_MASK */
+                    0x00000060 /* EMC_REFRESH */
+                    0x00000000 /* EMC_BURST_REFRESH_NUM */
+                    0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+                    0x00000002 /* EMC_PDEX2WR */
+                    0x00000002 /* EMC_PDEX2RD */
+                    0x00000001 /* EMC_PCHG2PDEN */
+                    0x00000000 /* EMC_ACT2PDEN */
+                    0x00000007 /* EMC_AR2PDEN */
+                    0x0000000f /* EMC_RW2PDEN */
+                    0x00000005 /* EMC_TXSR */
+                    0x00000005 /* EMC_TXSRDLL */
+                    0x00000004 /* EMC_TCKE */
+                    0x00000005 /* EMC_TCKESR */
+                    0x00000004 /* EMC_TPD */
+                    0x00000000 /* EMC_TFAW */
+                    0x00000000 /* EMC_TRPAB */
+                    0x00000005 /* EMC_TCLKSTABLE */
+                    0x00000005 /* EMC_TCLKSTOP */
+                    0x00000064 /* EMC_TREFBW */
+                    0x00000000 /* EMC_FBIO_CFG6 */
+                    0x00000000 /* EMC_ODT_WRITE */
+                    0x00000000 /* EMC_ODT_READ */
+                    0x106aa298 /* EMC_FBIO_CFG5 */
+                    0x002c00a0 /* EMC_CFG_DIG_DLL */
+                    0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+                    0x00064000 /* EMC_DLL_XFORM_DQS0 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS1 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS2 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS3 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS4 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS5 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS6 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS7 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS8 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS9 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS10 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS11 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS12 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS13 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS14 */
+                    0x00064000 /* EMC_DLL_XFORM_DQS15 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+                    0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+                    0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+                    0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+                    0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+                    0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+                    0x10000280 /* EMC_XM2CMDPADCTRL */
+                    0x00000000 /* EMC_XM2CMDPADCTRL4 */
+                    0x00111111 /* EMC_XM2CMDPADCTRL5 */
+                    0x00000000 /* EMC_XM2DQPADCTRL2 */
+                    0x00000000 /* EMC_XM2DQPADCTRL3 */
+                    0x77ffc081 /* EMC_XM2CLKPADCTRL */
+                    0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+                    0x81f1f108 /* EMC_XM2COMPPADCTRL */
+                    0x07070004 /* EMC_XM2VTTGENPADCTRL */
+                    0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+                    0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL3 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL4 */
+                    0x00514514 /* EMC_XM2DQSPADCTRL5 */
+                    0x51451400 /* EMC_XM2DQSPADCTRL6 */
+                    0x0000003f /* EMC_DSR_VTTGEN_DRV */
+                    0x00000007 /* EMC_TXDSRVTTGEN */
+                    0x00000000 /* EMC_FBIO_SPARE */
+                    0x00000042 /* EMC_ZCAL_WAIT_CNT */
+                    0x000e000e /* EMC_MRS_WAIT_CNT2 */
+                    0x00000000 /* EMC_CTT */
+                    0x00000003 /* EMC_CTT_DURATION */
+                    0x0000f2f3 /* EMC_CFG_PIPE */
+                    0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+                    0x0000000a /* EMC_QPOP */
+                >;
+            };
+        };
+    };
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra186-mc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) SoC Memory Controller
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  The NVIDIA Tegra186 SoC features a 128 bit memory controller that is split
+  into four 32 bit channels to support LPDDR4 with x16 subpartitions. The MC
+  handles memory requests for 40-bit virtual addresses from internal clients
+  and arbitrates among them to allocate memory bandwidth.
+
+  Up to 15 GiB of physical memory can be supported. Security features such as
+  encryption of traffic to and from DRAM via general security apertures are
+  available for video and other secure applications, as well as DRAM ECC for
+  automotive safety applications (single bit error correction and double bit
+  error detection).
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nvidia,tegra186-mc
+          - nvidia,tegra194-mc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  dma-ranges: true
+
+patternProperties:
+  "^external-memory-controller@[0-9a-f]+$":
+    description:
+      The bulk of the work involved in controlling the external memory
+      controller on NVIDIA Tegra186 and later is performed on the BPMP. This
+      coprocessor exposes the EMC clock that is used to set the frequency at
+      which the external memory is clocked and a remote procedure call that
+      can be used to obtain the set of available frequencies.
+    type: object
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nvidia,tegra186-emc
+              - nvidia,tegra194-emc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: external memory clock
+
+      clock-names:
+        items:
+          - const: emc
+
+      nvidia,bpmp:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description:
+          phandle of the node representing the BPMP
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@2c00000 {
+        compatible = "nvidia,tegra186-mc";
+        reg = <0x0 0x02c00000 0x0 0xb0000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+
+        /*
+         * Memory clients have access to all 40 bits that the memory
+         * controller can address.
+         */
+        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+        external-memory-controller@2c60000 {
+            compatible = "nvidia,tegra186-emc";
+            reg = <0x0 0x02c60000 0x0 0x50000>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_EMC>;
+            clock-names = "emc";
+
+            nvidia,bpmp = <&bpmp>;
+        };
+    };
+
+    bpmp: bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        #clock-cells = <1>;
+    };
--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@ -3,7 +3,9 @@
 The GPBR are a set of battery-backed registers.

 Required properties:
- compatible:		"atmel,at91sam9260-gpbr", "syscon"
+- compatible:		Should be one of the following:
+			"atmel,at91sam9260-gpbr", "syscon"
+			"microchip,sam9x60-gpbr", "syscon"
 - reg:			contains offset/length value of the GPBR memory
 			region.

--- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@ -13,6 +13,7 @@ Required properties:
 			"atmel,at91sam9n12-matrix", "syscon"
 			"atmel,at91sam9x5-matrix", "syscon"
 			"atmel,sama5d3-matrix", "syscon"
+			"microchip,sam9x60-matrix", "syscon"
 - reg:			Contains offset/length value of the Bus Matrix
 			memory region.

--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@ -9,6 +9,7 @@ Required properties:
 			"atmel,at91sam9260-smc", "syscon"
 			"atmel,sama5d3-smc", "syscon"
 			"atmel,sama5d2-smc", "syscon"
+			"microchip,sam9x60-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.

--- a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
@ -18,6 +18,7 @@ Required properties:
 Optional properties:
 ===================

+- reg: A hint for the memory regions associated with the P2A controller
 - memory-region: A phandle to a reserved_memory region to be used for the PCI
 		to AHB mapping

--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@ -57,6 +57,7 @@ Required properties:
 	"atmel,at91sam9g45-pmecc"
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
+	"microchip,sam9x60-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
       block, and the second one to the PMECC_ERRLOC block.

--- a/Documentation/devicetree/bindings/net/can/atmel-can.txt
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@ -1,7 +1,8 @@
 * AT91 CAN *

 Required properties:
-  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+    "microchip,sam9x60-can"
  - reg: Should contain CAN controller registers location and length
  - interrupts: Should contain IRQ line for the CAN controller

--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@ -7,6 +7,7 @@ Required properties:
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
 	      "renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
 	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
+	      "renesas,can-r8a774b1" if CAN controller is a part of R8A774B1 SoC.
 	      "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
@ -36,8 +37,8 @@ Required properties:
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".

-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
 For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
 be used by both CAN and CAN FD controller at the same time. It needs to be
 scaled to maximum frequency if any of these controllers use it. This is done
--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@ -5,6 +5,7 @@ Required properties:
 - compatible: Must contain one or more of the following:
  - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
  - "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
+  - "renesas,r8a774b1-canfd" for R8A774B1 (RZ/G2N) compatible controller.
  - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
  - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
@ -31,8 +32,8 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
 child node supports the "status" property only, which is used to
 enable/disable the respective channel.

-Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
-R8A77990, and R8A77995:
+Required properties for R8A774A1, R8A774B1, R8A774C0, R8A7795, R8A7796,
+R8A77965, R8A77990, and R8A77995:
 In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
 and CAN FD controller at the same time. It needs to be scaled to maximum
 frequency if any of these controllers use it. This is done using the below
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell MMP3 HSIC PHY
+
+maintainers:
+  - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+  compatible:
+    const: marvell,mmp3-hsic-phy
+
+  reg:
+    maxItems: 1
+    description: base address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to reset
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - "#phy-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    hsic-phy@f0001800 {
+            compatible = "marvell,mmp3-hsic-phy";
+            reg = <0xf0001800 0x40>;
+            reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+            #phy-cells = <0>;
+    };
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@ -22,6 +22,9 @@ description: |+
 properties:
  compatible:
    const: aspeed,ast2400-pinctrl
+  reg:
+    description: |
+      A hint for the memory regions associated with the pin-controller

 patternProperties:
  '^.*$':
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@ -23,6 +23,9 @@ description: |+
 properties:
  compatible:
    const: aspeed,ast2500-pinctrl
+  reg:
+    description: |
+      A hint for the memory regions associated with the pin-controller
  aspeed,external-nodes:
    minItems: 2
    maxItems: 2
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@ -30,13 +30,51 @@ properties:
      - items:
          - const: allwinner,sun50i-h5-pwm
          - const: allwinner,sun5i-a13-pwm
+      - const: allwinner,sun50i-h6-pwm

  reg:
    maxItems: 1

  clocks:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Module Clock
+      - description: Bus Clock
+
+  # Even though it only applies to subschemas under the conditionals,
+  # not listing them here will trigger a warning because of the
+  # additionalsProperties set to false.
+  clock-names: true
+
+  resets:
    maxItems: 1

+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun50i-h6-pwm
+
+then:
+  properties:
+    clocks:
+      maxItems: 2
+
+    clock-names:
+      items:
+        - const: mod
+        - const: bus
+
+  required:
+    - clock-names
+    - resets
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
 required:
  - "#pwm-cells"
  - compatible
@ -54,4 +92,17 @@ examples:
        #pwm-cells = <3>;
    };

+  - |
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    pwm@300a000 {
+      compatible = "allwinner,sun50i-h6-pwm";
+      reg = <0x0300a000 0x400>;
+      clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+      clock-names = "mod", "bus";
+      resets = <&ccu RST_BUS_PWM>;
+      #pwm-cells = <3>;
+    };
+
 ...
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@ -11,6 +11,7 @@ Required Properties:
  - compatible: must contain one or more of the following:
    - "renesas,tmu-r8a7740" for the r8a7740 TMU
    - "renesas,tmu-r8a774a1" for the r8a774A1 TMU
+    - "renesas,tmu-r8a774b1" for the r8a774B1 TMU
    - "renesas,tmu-r8a774c0" for the r8a774C0 TMU
    - "renesas,tmu-r8a7778" for the r8a7778 TMU
    - "renesas,tmu-r8a7779" for the r8a7779 TMU
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@ -1034,6 +1034,8 @@ patternProperties:
    description: Variscite Ltd.
  "^via,.*":
    description: VIA Technologies, Inc.
+  "^videostrong,.*":
+    description: Videostrong Technology Co., Ltd.
  "^virtio,.*":
    description: Virtual I/O Device Specification, developed by the OASIS consortium
  "^vishay,.*":
--- a/1
+++ b/1
@ -2092,6 +2092,7 @@ F:	drivers/rtc/rtc-pl031.c
 F:	drivers/watchdog/coh901327_wdt.c
 F:	Documentation/devicetree/bindings/arm/ste-*
 F:	Documentation/devicetree/bindings/arm/ux500/
+F:	Documentation/devicetree/bindings/arm/ux500.yaml
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git

 ARM/NUVOTON NPCM ARCHITECTURE
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -37,18 +37,24 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91-ariag25.dtb \
 	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
-	at91-kizboxmini.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-smartkiz.dtb \
 	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2-2.dtb \
 	at91-kizbox3-hs.dtb \
 	at91-nattis-2-natte-2.dtb \
 	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
@ -422,6 +428,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw560x.dtb \
 	imx6dl-gw5903.dtb \
 	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-hummingboard-emmc-som-v15.dtb \
 	imx6dl-hummingboard-som-v15.dtb \
@ -493,6 +503,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw560x.dtb \
 	imx6q-gw5903.dtb \
 	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-hummingboard-emmc-som-v15.dtb \
@ -554,6 +568,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-zii-rdu2.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
+	imx6sl-tolino-shine3.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SLL) += \
 	imx6sll-evk.dtb \
@ -612,6 +627,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
 	imx7ulp-evk.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-moxa-uc-8410a.dtb \
@ -691,6 +707,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-devkit8000.dtb \
 	omap3-devkit8000-lcd43.dtb \
 	omap3-devkit8000-lcd70.dtb \
+	omap3-echo.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-gta04a3.dtb \
@ -1129,6 +1146,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-orangepi-zero-plus2.dtb \
 	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
 	sun8i-r16-bananapi-m2m.dtb \
 	sun8i-r16-nintendo-nes-classic.dtb \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
@ -1182,7 +1200,9 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
 	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb
+	ste-hrefv60plus-tvk.dtb \
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
@ -1238,6 +1258,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
 	armada-385-db-88f6820-amc.dtb \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@ -113,7 +113,7 @@
 		};
 	};

-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@ -121,35 +121,15 @@
 	};

 	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
+		compatible = "tfc,s9700rtwv43tr-01b";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
+		backlight = <&backlight>;

-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@ -500,6 +480,12 @@
 	status = "okay";

 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };

 &elm {
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@ -183,36 +183,16 @@
 	};

 	panel {
-		compatible = "ti,tilcdc,panel";
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&lcd_pins_default>;
 		pinctrl-1 = <&lcd_pins_sleep>;
 		backlight = <&lcd_bl>;
-		status = "okay";
-		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <32>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive		= <480>;
-				vactive		= <272>;
-				hback-porch	= <43>;
-				hfront-porch	= <8>;
-				hsync-len	= <4>;
-				vback-porch	= <12>;
-				vfront-porch	= <4>;
-				vsync-len	= <10>;
-				clock-frequency = <9000000>;
-				hsync-active	= <0>;
-				vsync-active	= <0>;
+
+		port {
+			panel_0: endpoint@0 {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@ -725,6 +705,12 @@
 	status = "okay";

 	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };

 &rtc {
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@ -287,6 +287,19 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
 };

 &spi0 {
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@ -225,7 +225,6 @@

 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@ -1009,7 +1008,6 @@

 		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@ -1134,7 +1132,6 @@

 		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@ -1160,7 +1157,6 @@

 		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@ -1187,7 +1183,6 @@

 		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@ -1214,7 +1209,6 @@

 		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@ -1241,7 +1235,6 @@

 		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@ -1344,7 +1337,6 @@

 		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@ -1412,7 +1404,6 @@

 		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@ -1533,7 +1524,6 @@

 		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@ -1749,7 +1739,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
 				 <&dcan0_fck>;
@ -1773,7 +1762,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
 				 <&dcan1_fck>;
@ -1863,7 +1851,6 @@

 		target-module@0 {			/* 0x48300000, ap 66 48.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@ -1916,7 +1903,6 @@

 		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@ -1969,7 +1955,6 @@

 		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@ -2022,7 +2007,6 @@

 		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "lcdc";
 			reg = <0xe000 0x4>,
 			      <0xe054 0x4>;
 			reg-names = "rev", "sysc";
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@ -439,23 +439,62 @@
 			status = "disabled";
 		};

-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+			};
 		};

-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6 0>,
-			       <&edma 5 0>;
-			dma-names = "tx", "rx";
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 	};
 };
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@ -74,7 +74,7 @@
 			clock-names = "ick";
 		};

-		davinci_mdio: ethernet@5c030000 {
+		davinci_mdio: mdio@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";
--- a/arch/arm/boot/dts/am3703.dtsi
+++ b/arch/arm/boot/dts/am3703.dtsi
@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
+
+&sgx_module {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/am3715.dtsi
+++ b/arch/arm/boot/dts/am3715.dtsi
@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@ -256,33 +256,92 @@
 			};
 		};

-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};

-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6 0>,
-				<&edma 5 0>;
-			dma-names = "tx", "rx";
+		aes_target: target-module@53501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53501080 0x4>,
+			      <0x53501084 0x4>,
+			      <0x53501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53501000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 6 0>,
+				      <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};

-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34 0>,
-				<&edma 33 0>;
-			dma-names = "tx", "rx";
+		des_target: target-module@53701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53701030 0x4>,
+			      <0x53701034 0x4>,
+			      <0x53701038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x53701000 0x1000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 34 0>,
+				       <&edma 33 0>;
+				dma-names = "tx", "rx";
+			};
 		};

 		gpmc: gpmc@50000000 {
@ -305,17 +364,34 @@
 			status = "disabled";
 		};

-		qspi: spi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>,
-			      <0x30000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
+		target-module@47900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47900000 0x4>,
+			      <0x47900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x47900000 0x1000>,
+				 <0x30000000 0x30000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,am4372-qspi";
+				reg = <0 0x100>,
+				      <0x30000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks = <&dpll_per_m2_div4_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 138 0x4>;
+				num-cs = <4>;
+			};
 		};

 		dss: dss@4832a000 {
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@ -225,7 +225,6 @@

 		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "adc_tsc";
 			reg = <0xd000 0x4>,
 			      <0xd010 0x4>;
 			reg-names = "rev", "sysc";
@ -763,7 +762,6 @@

 		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi0";
 			reg = <0x30000 0x4>,
 			      <0x30110 0x4>,
 			      <0x30114 0x4>;
@ -900,7 +898,6 @@

 		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer3";
 			reg = <0x42000 0x4>,
 			      <0x42010 0x4>,
 			      <0x42014 0x4>;
@ -927,7 +924,6 @@

 		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer4";
 			reg = <0x44000 0x4>,
 			      <0x44010 0x4>,
 			      <0x44014 0x4>;
@ -955,7 +951,6 @@

 		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x46000 0x4>,
 			      <0x46010 0x4>,
 			      <0x46014 0x4>;
@ -983,7 +978,6 @@

 		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x48000 0x4>,
 			      <0x48010 0x4>,
 			      <0x48014 0x4>;
@ -1011,7 +1005,6 @@

 		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x4a000 0x4>,
 			      <0x4a010 0x4>,
 			      <0x4a014 0x4>;
@ -1107,7 +1100,6 @@

 		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@ -1169,7 +1161,6 @@

 		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xca000 0x4>,
 			      <0xca010 0x4>,
 			      <0xca014 0x4>;
@ -1282,7 +1273,6 @@

 		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi1";
 			reg = <0xa0000 0x4>,
 			      <0xa0110 0x4>,
 			      <0xa0114 0x4>;
@ -1313,7 +1303,6 @@

 		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi2";
 			reg = <0xa2000 0x4>,
 			      <0xa2110 0x4>,
 			      <0xa2114 0x4>;
@ -1344,7 +1333,6 @@

 		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi3";
 			reg = <0xa4000 0x4>,
 			      <0xa4110 0x4>,
 			      <0xa4114 0x4>;
@ -1527,7 +1515,6 @@

 		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0xc1000 0x4>,
 			      <0xc1010 0x4>,
 			      <0xc1014 0x4>;
@ -1556,7 +1543,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
 			clock-names = "fck";
@ -1577,7 +1563,6 @@
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
-			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
 			clock-names = "fck";
@ -1695,7 +1680,6 @@

 		target-module@0 {			/* 0x48300000, ap 56 40.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x0 0x4>,
 			      <0x4 0x4>;
 			reg-names = "rev", "sysc";
@ -1748,7 +1732,6 @@

 		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x2000 0x4>,
 			      <0x2004 0x4>;
 			reg-names = "rev", "sysc";
@ -1801,7 +1784,6 @@

 		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x4000 0x4>,
 			      <0x4004 0x4>;
 			reg-names = "rev", "sysc";
@ -1854,7 +1836,6 @@

 		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss3";
 			reg = <0x6000 0x4>,
 			      <0x6004 0x4>;
 			reg-names = "rev", "sysc";
@ -1896,7 +1877,6 @@

 		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss4";
 			reg = <0x8000 0x4>,
 			      <0x8004 0x4>;
 			reg-names = "rev", "sysc";
@ -1938,7 +1918,6 @@

 		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss5";
 			reg = <0xa000 0x4>,
 			      <0xa004 0x4>;
 			reg-names = "rev", "sysc";
@ -2086,7 +2065,6 @@

 		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe0";
 			reg = <0x26000 0x4>,
 			      <0x26104 0x4>;
 			reg-names = "rev", "sysc";
@ -2113,7 +2091,6 @@

 		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "vpfe1";
 			reg = <0x28000 0x4>,
 			      <0x28104 0x4>;
 			reg-names = "rev", "sysc";
@ -2162,7 +2139,6 @@

 		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3d000 0x4>,
 			      <0x3d010 0x4>,
 			      <0x3d014 0x4>;
@ -2189,7 +2165,6 @@

 		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x3f000 0x4>,
 			      <0x3f010 0x4>,
 			      <0x3f014 0x4>;
@ -2216,7 +2191,6 @@

 		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x41000 0x4>,
 			      <0x41010 0x4>,
 			      <0x41014 0x4>;
@ -2243,7 +2217,6 @@

 		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spi4";
 			reg = <0x45000 0x4>,
 			      <0x45110 0x4>,
 			      <0x45114 0x4>;
@ -2358,7 +2331,6 @@

 		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp0";
 			reg = <0xa8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
@ -2440,7 +2412,6 @@

 		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0xe8000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@ -9,6 +9,7 @@
 	aliases {
 		rtc0 = &tps659038_rtc;
 		rtc1 = &rtc;
+		display0 = &hdmi0;
 	};

 	chosen {
@ -96,6 +97,48 @@
 			default-state = "off";
 		};
 	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+		gpios = <0>, /* optional CT_CP_HPD */
+			<0>, /* optional LS_OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };

 &dra7_pmx_core {
@ -485,3 +528,19 @@
 &cpu0 {
 	vdd-supply = <&smps12_reg>;
 };
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button_1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@ -111,11 +111,6 @@
 };

 &i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
 	/*
 	 * PCA9655 GPIO expander, up to 1MHz clock.
 	 *  0-CON3 CLKREQ#
@ -183,6 +178,12 @@
 		compatible = "microchip,mcp3021";
 		reg = <0x4c>;
 	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
 };

 &i2c1 {
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@ -140,11 +140,6 @@
 	soc {
 		internal-regs {
 			i2c@11000 {
-				clock-frequency = <400000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
 				/*
 				 * PCA9655 GPIO expander, up to 1MHz clock.
 				 *  0-Board Revision bit 0 #
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@ -71,6 +71,19 @@
 	};
 };

+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
 &pinctrl {
 	microsom_phy_clk_pins: microsom-phy-clk-pins {
 		marvell,pins = "mpp45";
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@ -76,7 +76,6 @@

 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@ -75,7 +75,6 @@

 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@ -35,7 +35,6 @@
 &mac0 {
 	status = "okay";
 	use-ncsi;
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@ -97,22 +97,22 @@
 	status = "okay";

 	power-supply@68 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x68>;
 	};

 	power-supply@69 {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x69>;
 	};

 	power-supply@6a {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6a>;
 	};

 	power-supply@6b {
-		compatible = "ibm,cffps2";
+		compatible = "ibm,cffps";
 		reg = <0x6b>;
 	};
 };
@ -352,18 +352,8 @@
 &i2c8 {
 	status = "okay";

-	ucd90320@b {
-		compatible = "ti,ucd90160";
-		reg = <0x0b>;
-	};
-
-	ucd90320@c {
-		compatible = "ti,ucd90160";
-		reg = <0x0c>;
-	};
-
 	ucd90320@11 {
-		compatible = "ti,ucd90160";
+		compatible = "ti,ucd90320";
 		reg = <0x11>;
 	};

--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@ -94,8 +94,6 @@

 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;

 		fan0-presence {
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@ -82,8 +82,6 @@

 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;

 		scm0-presence {
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@ -14,7 +14,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};

-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};

@ -107,10 +107,7 @@

 &mac0 {
 	status = "okay";
-
 	use-ncsi;
-	no-hw-checksum;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
@ -236,3 +233,16 @@
 &wdt2 {
 	aspeed,alt-boot;
 };
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@ -77,8 +77,6 @@

 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;

 		fan0-presence {
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@ -179,18 +179,21 @@
 				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;

-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2400-pinctrl";
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
 					compatible = "aspeed,ast2400-p2a-ctrl";
 					status = "disabled";
 				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
 			};

 			rng: hwrng@1e6e2078 {
@ -346,14 +349,14 @@

 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};

-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@ -47,13 +47,6 @@
 		reg = <0x80000000 0>;
 	};

-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@ -213,23 +206,32 @@
 			#size-cells = <1>;
 			ranges;

+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;

-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2500-pinctrl";
-					aspeed,external-nodes = <&gfx &lhc>;
-
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
 				};

-				p2a: p2a-control {
-					compatible = "aspeed,ast2500-p2a-ctrl";
-					status = "disabled";
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
 				};
 			};

@ -460,29 +462,30 @@

 					lpc_ctrl: lpc-ctrl@0 {
 						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x80>;
+						reg = <0x0 0x10>;
 						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};

-					lpc_snoop: lpc-snoop@0 {
+					lpc_snoop: lpc-snoop@10 {
 						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x0 0x80>;
+						reg = <0x10 0x8>;
 						interrupts = <8>;
 						status = "disabled";
 					};

-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
 					lpc_reset: reset-controller@18 {
 						compatible = "aspeed,ast2500-lpc-reset";
 						reg = <0x18 0x4>;
 						#reset-cells = <1>;
 					};

+					lhc: lhc@20 {
+						compatible = "aspeed,ast2500-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+
 					ibt: ibt@c0 {
 						compatible = "aspeed,ast2500-ibt-bmc";
 						reg = <0xc0 0x18>;
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@ -365,7 +365,7 @@
 				status = "disabled";
 			};

-			wdt4: watchdog@1e7850C0 {
+			wdt4: watchdog@1e7850c0 {
 				compatible = "aspeed,ast2600-wdt";
 				reg = <0x1e7850C0 0x40>;
 				status = "disabled";
--- a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@ -71,7 +71,6 @@

 &mac1 {
 	status = "okay";
-	no-hw-checksum;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@ -28,85 +28,6 @@
 		};
 	};

-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@ -127,15 +48,6 @@
 		};
 	};

-	i2c-gpio-0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
 	pwm_leds {
 		compatible = "pwm-leds";

@ -179,3 +91,87 @@
 			     &pinctrl_tcb1_tiob0>;
 	};
 };
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
+
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
--- a/arch/arm/boot/dts/at91-kizboxmini-base.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts
@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@ -1,17 +1,16 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-License-Identifier: GPL-2.0
 /*
 * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
 *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
 */
-/dts-v1/;
 #include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>

 / {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
 	chosen {
 		bootargs = "ubi.mtd=ubi";
 		stdout-path = &dbgu;
@ -22,24 +21,16 @@
 	};

 	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
 		slow_xtal {
 			clock-frequency = <32768>;
 		};

-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
+		adc_op_clk {
+			status = "disabled";
 		};
 	};

@ -63,17 +54,25 @@
 		};
 	};

-	pwm_leds {
+	leds: pwm_leds {
 		compatible = "pwm-leds";

-		green {
+		led_blue: pwm_blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: pwm_green {
 			label = "pwm:green:user";
 			pwms = <&pwm0 0 10000000 0>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};

-		red {
+		led_red: pwm_red {
 			label = "pwm:red:user";
 			pwms = <&pwm0 1 10000000 0>;
 			max-brightness = <255>;
@ -82,53 +81,12 @@
 	};
 };

-&dbgu {
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };

-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				bootstrap@0 {
-					label = "bootstrap";
-					reg = <0x0 0x20000>;
-				};
-
-				ubi@20000 {
-					label = "ubi";
-					reg = <0x20000 0x7fe0000>;
-				};
-			};
-		};
-	};
-};
-
 &macb0 {
 	phy-mode = "rmii";
 	status = "okay";
@ -137,26 +95,70 @@
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1>;
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
 	status = "okay";
 };

-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
+&dbgu {
+	status = "okay";
 };

-&usart0 {
+&watchdog {
 	status = "okay";
 };

+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
 &usb0 {
 	num-ports = <1>;
 	status = "okay";
@ -166,6 +168,3 @@
 	status = "okay";
 };

-&watchdog {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/at91-kizboxmini-mb.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/at91-kizboxmini-rd.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@ -8,7 +8,6 @@
 */
 /dts-v1/;
 #include "at91-linea.dtsi"
-#include "sama5d3_lcd.dtsi"
 #include "at91-natte.dtsi"

 / {
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators: regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_1v8: fixed-regulator-vdd_1v8@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd_1v5: fixed-regulator-vdd_1v5@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD_1V5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD1_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+
+		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "VDD2_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code=<0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c32";
+			reg = <0x53>;
+			pagesize = <16>;
+			size = <128>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi0: spi@400 {
+		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+		reg = <0x400 0x200>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+		clock-names = "spi_clk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		atmel,fifo-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart1: serial@200 {
+		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(10))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		atmel,fifo-size = <16>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+			 /*	A	B	C	*/
+			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
+			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
+			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
+			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
+			 >;
+
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@ -24,6 +24,10 @@
 	};

 	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
 		apb {
 			qspi1: spi@f0024000 {
 				pinctrl-names = "default";
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@ -131,6 +131,9 @@
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
 					dma-names = "tx", "rx";
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
@ -246,6 +249,9 @@

 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(13))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(14))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3700000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+};
+
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@ -0,0 +1,270 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		compatible = "atmel,at91sam9260-usart";
+		reg = <0x200 0x200>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(11))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(12))>;
+		dma-names = "tx", "rx";
+		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		clock-names = "usart";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: spi_flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
--- a/arch/arm/boot/dts/at91-smartkiz.dts
+++ b/arch/arm/boot/dts/at91-smartkiz.dts
@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&leds {
+	blue {
+		status = "okay";
+	};
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@ -187,7 +187,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -221,7 +221,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -239,7 +239,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -257,7 +257,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -275,7 +275,7 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
@ -283,7 +283,7 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
@ -738,7 +738,7 @@
 				status = "disabled";
 			};

-			watchdog@fffffd40 {
+			watchdog: watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
@ -793,7 +793,7 @@
 		};
 	};

-	i2c-gpio-0 {
+	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@ -329,7 +329,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -347,7 +347,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -365,7 +365,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@ -183,7 +183,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -201,7 +201,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -219,7 +219,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@ -556,7 +556,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -574,7 +574,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -592,7 +592,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -610,7 +610,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
 							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@ -682,7 +682,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -721,7 +721,7 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -744,7 +744,7 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

@ -767,7 +767,7 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};

--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@ -12,26 +12,6 @@

 	interrupt-parent = <&gicv2>;

-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-		 * that's not good enough for the BCM2711 as some devices can
-		 * only address the lower 1G of memory (ZONE_DMA).
-		 */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x2000000>; /* 32MB */
-			alloc-ranges = <0x0 0x00000000 0x40000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-
 	soc {
 		/*
 		 * Defined ranges:
@ -123,10 +103,8 @@
 		};

 		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* RNG is incompatible with brcm,bcm2835-rng */
-			status = "disabled";
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
 		};

 		uart2: serial@7e201400 {
@ -342,7 +320,36 @@
 		#address-cells = <2>;
 		#size-cells = <1>;

-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};

 		genet: ethernet@7d580000 {
 			compatible = "brcm,bcm2711-genet-v5";
@ -840,6 +847,19 @@
 	};
 };

+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
 &i2c0 {
 	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
 	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@ -70,6 +70,12 @@
 			system-power-controller;
 		};

+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
 		pixelvalve@7e206000 {
 			compatible = "brcm,bcm2835-pixelvalve0";
 			reg = <0x7e206000 0x100>;
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@ -30,6 +30,19 @@
 		stdout-path = "serial0:115200n8";
 	};

+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
@ -84,12 +97,6 @@
 				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
 		};

-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
 		mailbox: mailbox@7e00b880 {
 			compatible = "brcm,bcm2835-mbox";
 			reg = <0x7e00b880 0x40>;
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@ -55,18 +55,9 @@
 		priority = <200>;
 	};

-	/* Hardware I2C block cannot do more than 63 bytes per transfer,
-	 * which would prevent reading from a SFP's EEPROM (256 byte).
-	 */
-	i2c1: i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
 	sfp: sfp {
 		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
+		i2c-bus = <&i2c0>;
 		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
 		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@ -74,6 +65,10 @@
 	};
 };

+&i2c0 {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/dm3725.dtsi
+++ b/arch/arm/boot/dts/dm3725.dtsi
@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+	status = "disabled";
+};
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@ -186,7 +186,6 @@

 		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "dma_system";
 			reg = <0x56000 0x4>,
 			      <0x5602c 0x4>,
 			      <0x56028 0x4>;
@ -212,7 +211,7 @@
 			ranges = <0x0 0x56000 0x1000>;

 			sdma: dma-controller@0 {
-				compatible = "ti,omap4430-sdma";
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
 				reg = <0x0 0x1000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
@ -234,7 +233,6 @@

 		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp1";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>,
 			      <0x80014 0x4>;
@ -302,7 +300,6 @@

 		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "ocp2scp3";
 			reg = <0x90000 0x4>,
 			      <0x90010 0x4>,
 			      <0x90014 0x4>;
@ -394,7 +391,6 @@

 		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
 			reg = <0xd9038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@ -414,7 +410,6 @@

 		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
 			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
 			reg = <0xdd038 0x4>;
 			reg-names = "sysc";
 			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
@ -471,7 +466,6 @@

 		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "spinlock";
 			reg = <0xf6000 0x4>,
 			      <0xf6010 0x4>,
 			      <0xf6014 0x4>;
@ -1233,7 +1227,6 @@

 		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer9";
 			reg = <0x3e000 0x4>,
 			      <0x3e010 0x4>;
 			reg-names = "rev", "sysc";
@ -1748,7 +1741,6 @@

 		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "elm";
 			reg = <0x78000 0x4>,
 			      <0x78010 0x4>,
 			      <0x78014 0x4>;
@ -1842,7 +1834,6 @@

 		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer10";
 			reg = <0x86000 0x4>,
 			      <0x86010 0x4>;
 			reg-names = "rev", "sysc";
@ -1870,7 +1861,6 @@

 		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer11";
 			reg = <0x88000 0x4>,
 			      <0x88010 0x4>;
 			reg-names = "rev", "sysc";
@ -2044,6 +2034,37 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};

+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
@ -2490,7 +2511,6 @@

 		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss0";
 			reg = <0x3e000 0x4>,
 			      <0x3e004 0x4>;
 			reg-names = "rev", "sysc";
@ -2537,7 +2557,6 @@

 		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss1";
 			reg = <0x40000 0x4>,
 			      <0x40004 0x4>;
 			reg-names = "rev", "sysc";
@ -2584,7 +2603,6 @@

 		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "epwmss2";
 			reg = <0x42000 0x4>,
 			      <0x42004 0x4>;
 			reg-names = "rev", "sysc";
@ -3326,7 +3344,6 @@

 		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer5";
 			reg = <0x20000 0x4>,
 			      <0x20010 0x4>;
 			reg-names = "rev", "sysc";
@ -3354,7 +3371,6 @@

 		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer6";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>;
 			reg-names = "rev", "sysc";
@ -3382,7 +3398,6 @@

 		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer7";
 			reg = <0x24000 0x4>,
 			      <0x24010 0x4>;
 			reg-names = "rev", "sysc";
@ -3410,7 +3425,6 @@

 		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer8";
 			reg = <0x26000 0x4>,
 			      <0x26010 0x4>;
 			reg-names = "rev", "sysc";
@ -3438,7 +3452,6 @@

 		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer13";
 			reg = <0x28000 0x4>,
 			      <0x28010 0x4>;
 			reg-names = "rev", "sysc";
@ -3466,7 +3479,6 @@

 		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer14";
 			reg = <0x2a000 0x4>,
 			      <0x2a010 0x4>;
 			reg-names = "rev", "sysc";
@ -3494,7 +3506,6 @@

 		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer15";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
 			reg-names = "rev", "sysc";
@ -3522,7 +3533,6 @@

 		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer16";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
 			reg-names = "rev", "sysc";
@ -4422,7 +4432,6 @@

 		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
-			ti,hwmods = "timer12";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>;
 			reg-names = "rev", "sysc";
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@ -377,44 +377,120 @@
 			ti,hwmods = "dmm";
 		};

-		mmu0_dsp1: mmu@40d01000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d01000 0x100>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			status = "disabled";
+		target-module@40d01000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d01000 0x4>,
+			      <0x40d01010 0x4>,
+			      <0x40d01014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d01000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			};
 		};

-		mmu1_dsp1: mmu@40d02000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d02000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			status = "disabled";
+		target-module@40d02000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d02000 0x4>,
+			      <0x40d02010 0x4>,
+			      <0x40d02014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d02000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			};
 		};

-		mmu_ipu1: mmu@58882000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x58882000 0x100>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu1";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@58882000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58882000 0x4>,
+			      <0x58882010 0x4>,
+			      <0x58882014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_ipu 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58882000 0x100>;
+
+			mmu_ipu1: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};

-		mmu_ipu2: mmu@55082000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu2";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55082000 0x100>;
+
+			mmu_ipu2: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};

 		abb_mpu: regulator-abb-mpu {
@ -652,48 +728,96 @@
 			};
 		};

-		aes1: aes@4b500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b500000 0xa0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes1_target: target-module@4b500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b500080 0x4>,
+			      <0x4b500084 0x4>,
+			      <0x4b500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b500000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};

-		aes2: aes@4b700000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b700000 0xa0>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		aes2_target: target-module@4b700000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b700080 0x4>,
+			      <0x4b700084 0x4>,
+			      <0x4b700088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
 			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b700000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};

-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
+		sham_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
 			clock-names = "fck";
-		};
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;

-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};

 		opp_supply_mpu: opp-supply@4a003b20 {
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@ -66,24 +66,63 @@
 			};
 		};

-		mmu0_dsp2: mmu@41501000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41501000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			status = "disabled";
+		target-module@41501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41501000 0x4>,
+			      <0x41501010 0x4>,
+			      <0x41501014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41501000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu0_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			};
 		};

-		mmu1_dsp2: mmu@41502000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41502000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			status = "disabled";
+		target-module@41502000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41502000 0x4>,
+			      <0x41502010 0x4>,
+			      <0x41502014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41502000 0x1000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			mmu1_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			};
 		};
 	};
 };
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@ -13,6 +13,13 @@
 	model = "TI DRA762 EVM";
 	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";

+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
@ -116,6 +123,48 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };

 &i2c1 {
@ -411,6 +460,23 @@
 	phy-supply = <&ldo3_reg>;
 };

+&dss {
+	status = "ok";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "ok";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
 &qspi {
 	spi-max-frequency = <96000000>;
 	m25p80@0 {
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@ -48,7 +48,8 @@
 		};
 	};

-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};

--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@ -145,12 +145,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;

-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};

-			smp-sysram@3f000 {
+			smp-sram@3f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x3f000 0x1000>;
 			};
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@ -590,16 +590,16 @@
 };

 &sysram {
-	smp-sysram@0 {
+	smp-sram@0 {
 		status = "disabled";
 	};

-	smp-sysram@5000 {
+	smp-sram@5000 {
 		compatible = "samsung,exynos4210-sysram";
 		reg = <0x5000 0x1000>;
 	};

-	smp-sysram@1f000 {
+	smp-sram@1f000 {
 		status = "disabled";
 	};
 };
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@ -79,12 +79,12 @@
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x20000>;

-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};

-			smp-sysram@1f000 {
+			smp-sram@1f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x1f000 0x1000>;
 			};
--- a/Показать больше
+++ b/Показать больше