arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts

The regulator is a part of the hikey board, therefore let's move it from
the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the
regulator according to the datasheet (5V_HUB) to better reflect the HW.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -81,6 +81,16 @@
 		};
 	};
 
+	reg_5v_hub: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio0 7 0>;
+		regulator-always-on;
+	};
+
 	soc {
 		spi0: spi@f7106000 {
 			status = "ok";

arch/arm64/boot/dts/hisilicon/hi6220.dtsi

@@ -725,20 +725,10 @@
 			status = "disabled";
 		};
 
-		fixed_5v_hub: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "fixed_5v_hub";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio0 7 0>;
-			regulator-always-on;
-		};
-
 		usb_phy: usbphy {
 			compatible = "hisilicon,hi6220-usb-phy";
 			#phy-cells = <0>;
-			phy-supply = <&fixed_5v_hub>;
+			phy-supply = <&reg_5v_hub>;
 			hisilicon,peripheral-syscon = <&sys_ctrl>;
 		};