gpio/samsung: gpio-samsung.c to support Samsung GPIOs

This patch adds support for Samsung GPIOs with one gpio driver
and removes old GPIO drivers which are drivers/gpio-s3c24xx.c,
gpio-s3c64xx.c, gpio-s5p64x0.c, gpio-s5pc100.c, gpio-s5pv210.c,
gpio-exynos4.c, gpio-plat-samsung.c, plat-samsung/gpio-config.c
and gpio.c to support each Samsung SoCs before. Because the
gpio-samsung.c can replace old Samsung GPIO drivers.
Basically, the gpio-samsung.c has been made by their merging
and removing duplicated definitions.

Note: gpio-samsung.c includes some SoC dependent codes and it
will be replaced next time.

Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
[kgene.kim@samsung.com: squash the removing and adding patches]
[kgene.kim@samsung.com: fixes bug during to register of gpio_chips]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Kukjin Kim 2011-08-30 20:39:08 +09:00
Родитель c4b3fd38df
Коммит 1b39d5f2cc
13 изменённых файлов: 2687 добавлений и 2950 удалений

Просмотреть файл

@ -15,8 +15,6 @@ obj-y += init.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
obj-y += dev-asocdma.o
obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o

Просмотреть файл

@ -1,431 +0,0 @@
/* linux/arch/arm/plat-s3c/gpio-config.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series GPIO configuration core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
int offset;
int ret;
if (!chip)
return -EINVAL;
offset = pin - chip->chip.base;
s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_setcfg(chip, offset, config);
s3c_gpio_unlock(chip, flags);
return ret;
}
EXPORT_SYMBOL(s3c_gpio_cfgpin);
int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
unsigned int cfg)
{
int ret;
for (; nr > 0; nr--, start++) {
ret = s3c_gpio_cfgpin(start, cfg);
if (ret != 0)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
unsigned int cfg, s3c_gpio_pull_t pull)
{
int ret;
for (; nr > 0; nr--, start++) {
s3c_gpio_setpull(start, pull);
ret = s3c_gpio_cfgpin(start, cfg);
if (ret != 0)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
unsigned s3c_gpio_getcfg(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
unsigned ret = 0;
int offset;
if (chip) {
offset = pin - chip->chip.base;
s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_getcfg(chip, offset);
s3c_gpio_unlock(chip, flags);
}
return ret;
}
EXPORT_SYMBOL(s3c_gpio_getcfg);
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
int offset, ret;
if (!chip)
return -EINVAL;
offset = pin - chip->chip.base;
s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_setpull(chip, offset, pull);
s3c_gpio_unlock(chip, flags);
return ret;
}
EXPORT_SYMBOL(s3c_gpio_setpull);
s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
int offset;
u32 pup = 0;
if (chip) {
offset = pin - chip->chip.base;
s3c_gpio_lock(chip, flags);
pup = s3c_gpio_do_getpull(chip, offset);
s3c_gpio_unlock(chip, flags);
}
return (__force s3c_gpio_pull_t)pup;
}
EXPORT_SYMBOL(s3c_gpio_getpull);
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = off;
u32 con;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
/* Map output to 0, and SFN2 to 1 */
cfg -= 1;
if (cfg > 1)
return -EINVAL;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0x1 << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
unsigned int off)
{
u32 con;
con = __raw_readl(chip->base);
con >>= off;
con &= 1;
con++;
return S3C_GPIO_SFN(con);
}
int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = off * 2;
u32 con;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
if (cfg > 3)
return -EINVAL;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0x3 << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
unsigned int off)
{
u32 con;
con = __raw_readl(chip->base);
con >>= off * 2;
con &= 3;
/* this conversion works for IN and OUT as well as special mode */
return S3C_GPIO_SPECIAL(con);
}
#endif
#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = (off & 7) * 4;
u32 con;
if (off < 8 && chip->chip.ngpio > 8)
reg -= 4;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0xf << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
unsigned int off)
{
void __iomem *reg = chip->base;
unsigned int shift = (off & 7) * 4;
u32 con;
if (off < 8 && chip->chip.ngpio > 8)
reg -= 4;
con = __raw_readl(reg);
con >>= shift;
con &= 0xf;
/* this conversion works for IN and OUT as well as special mode */
return S3C_GPIO_SPECIAL(con);
}
#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
void __iomem *reg = chip->base + 0x08;
int shift = off * 2;
u32 pup;
pup = __raw_readl(reg);
pup &= ~(3 << shift);
pup |= pull << shift;
__raw_writel(pup, reg);
return 0;
}
s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
unsigned int off)
{
void __iomem *reg = chip->base + 0x08;
int shift = off * 2;
u32 pup = __raw_readl(reg);
pup >>= shift;
pup &= 0x3;
return (__force s3c_gpio_pull_t)pup;
}
#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
switch (pull) {
case S3C_GPIO_PULL_NONE:
pull = 0x01;
break;
case S3C_GPIO_PULL_UP:
pull = 0x00;
break;
case S3C_GPIO_PULL_DOWN:
pull = 0x02;
break;
}
return s3c_gpio_setpull_updown(chip, off, pull);
}
s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off)
{
s3c_gpio_pull_t pull;
pull = s3c_gpio_getpull_updown(chip, off);
switch (pull) {
case 0x00:
pull = S3C_GPIO_PULL_UP;
break;
case 0x01:
case 0x03:
pull = S3C_GPIO_PULL_NONE;
break;
case 0x02:
pull = S3C_GPIO_PULL_DOWN;
break;
}
return pull;
}
#endif
#endif
#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull,
s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
if (pull == updown)
pup &= ~(1 << off);
else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
__raw_writel(pup, reg);
return 0;
}
static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
return pup ? S3C_GPIO_PULL_NONE : updown;
}
#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
#ifdef CONFIG_S3C_GPIO_PULL_UP
s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off)
{
return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
}
int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
#ifdef CONFIG_S3C_GPIO_PULL_DOWN
s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
unsigned int off)
{
return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
}
int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
}
#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned int off;
void __iomem *reg;
int shift;
u32 drvstr;
if (!chip)
return -EINVAL;
off = pin - chip->chip.base;
shift = off * 2;
reg = chip->base + 0x0C;
drvstr = __raw_readl(reg);
drvstr = drvstr >> shift;
drvstr &= 0x3;
return (__force s5p_gpio_drvstr_t)drvstr;
}
EXPORT_SYMBOL(s5p_gpio_get_drvstr);
int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned int off;
void __iomem *reg;
int shift;
u32 tmp;
if (!chip)
return -EINVAL;
off = pin - chip->chip.base;
shift = off * 2;
reg = chip->base + 0x0C;
tmp = __raw_readl(reg);
tmp &= ~(0x3 << shift);
tmp |= drvstr << shift;
__raw_writel(tmp, reg);
return 0;
}
EXPORT_SYMBOL(s5p_gpio_set_drvstr);
#endif /* CONFIG_S5P_GPIO_DRVSTR */

Просмотреть файл

@ -1,167 +0,0 @@
/* linux/arch/arm/plat-s3c/gpio.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series GPIO core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <plat/gpio-core.h>
#ifdef CONFIG_S3C_GPIO_TRACK
struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip)
{
unsigned int gpn;
int i;
gpn = chip->chip.base;
for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
s3c_gpios[gpn] = chip;
}
}
#endif /* CONFIG_S3C_GPIO_TRACK */
/* Default routines for controlling GPIO, based on the original S3C24XX
* GPIO functions which deal with the case where each gpio bank of the
* chip is as following:
*
* base + 0x00: Control register, 2 bits per gpio
* gpio n: 2 bits starting at (2*n)
* 00 = input, 01 = output, others mean special-function
* base + 0x04: Data register, 1 bit per gpio
* bit n: data bit n
*/
static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long con;
s3c_gpio_lock(ourchip, flags);
con = __raw_readl(base + 0x00);
con &= ~(3 << (offset * 2));
__raw_writel(con, base + 0x00);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
static int s3c_gpiolib_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
unsigned long con;
s3c_gpio_lock(ourchip, flags);
dat = __raw_readl(base + 0x04);
dat &= ~(1 << offset);
if (value)
dat |= 1 << offset;
__raw_writel(dat, base + 0x04);
con = __raw_readl(base + 0x00);
con &= ~(3 << (offset * 2));
con |= 1 << (offset * 2);
__raw_writel(con, base + 0x00);
__raw_writel(dat, base + 0x04);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
static void s3c_gpiolib_set(struct gpio_chip *chip,
unsigned offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
s3c_gpio_lock(ourchip, flags);
dat = __raw_readl(base + 0x04);
dat &= ~(1 << offset);
if (value)
dat |= 1 << offset;
__raw_writel(dat, base + 0x04);
s3c_gpio_unlock(ourchip, flags);
}
static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
unsigned long val;
val = __raw_readl(ourchip->base + 0x04);
val >>= offset;
val &= 1;
return val;
}
__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
{
struct gpio_chip *gc = &chip->chip;
int ret;
BUG_ON(!chip->base);
BUG_ON(!gc->label);
BUG_ON(!gc->ngpio);
spin_lock_init(&chip->lock);
if (!gc->direction_input)
gc->direction_input = s3c_gpiolib_input;
if (!gc->direction_output)
gc->direction_output = s3c_gpiolib_output;
if (!gc->set)
gc->set = s3c_gpiolib_set;
if (!gc->get)
gc->get = s3c_gpiolib_get;
#ifdef CONFIG_PM
if (chip->pm != NULL) {
if (!chip->pm->save || !chip->pm->resume)
printk(KERN_ERR "gpio: %s has missing PM functions\n",
gc->label);
} else
printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
#endif
/* gpiochip_add() prints own failure message on error. */
ret = gpiochip_add(gc);
if (ret >= 0)
s3c_gpiolib_track(chip);
}
int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
struct s3c_gpio_chip *s3c_chip = container_of(chip,
struct s3c_gpio_chip, chip);
return s3c_chip->irq_base + offset;
}

Просмотреть файл

@ -95,10 +95,6 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
config GPIO_EXYNOS4
def_bool y
depends on CPU_EXYNOS4210
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
@ -131,30 +127,6 @@ config GPIO_MXS
select GPIO_GENERIC
select GENERIC_IRQ_CHIP
config GPIO_PLAT_SAMSUNG
def_bool y
depends on SAMSUNG_GPIOLIB_4BIT
config GPIO_S3C24XX
def_bool y
depends on PLAT_S3C24XX
config GPIO_S3C64XX
def_bool y
depends on ARCH_S3C64XX
config GPIO_S5P64X0
def_bool y
depends on ARCH_S5P64X0
config GPIO_S5PC100
def_bool y
depends on CPU_S5PC100
config GPIO_S5PV210
def_bool y
depends on CPU_S5PV210
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA

Просмотреть файл

@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
@ -38,14 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o
obj-$(CONFIG_GPIO_S3C64XX) += gpio-s3c64xx.o
obj-$(CONFIG_GPIO_S5P64X0) += gpio-s5p64x0.o
obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o

Просмотреть файл

@ -1,385 +0,0 @@
/*
* EXYNOS4 - GPIOlib support
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
if (pull == S3C_GPIO_PULL_UP)
pull = 3;
return s3c_gpio_setpull_updown(chip, off, pull);
}
s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
unsigned int off)
{
s3c_gpio_pull_t pull;
pull = s3c_gpio_getpull_updown(chip, off);
if (pull == 3)
pull = S3C_GPIO_PULL_UP;
return pull;
}
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_exynos4,
.get_pull = s3c_gpio_getpull_exynos4,
};
static struct s3c_gpio_cfg gpio_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_exynos4,
.get_pull = s3c_gpio_getpull_exynos4,
};
/*
* Following are the gpio banks in v310.
*
* The 'config' member when left to NULL, is initialized to the default
* structure gpio_cfg in the init function below.
*
* The 'base' member is also initialized in the init function below.
* Note: The initialization of 'base' member of s3c_gpio_chip structure
* uses the above macro and depends on the banks being listed in order here.
*/
static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
{
.chip = {
.base = EXYNOS4_GPA0(0),
.ngpio = EXYNOS4_GPIO_A0_NR,
.label = "GPA0",
},
}, {
.chip = {
.base = EXYNOS4_GPA1(0),
.ngpio = EXYNOS4_GPIO_A1_NR,
.label = "GPA1",
},
}, {
.chip = {
.base = EXYNOS4_GPB(0),
.ngpio = EXYNOS4_GPIO_B_NR,
.label = "GPB",
},
}, {
.chip = {
.base = EXYNOS4_GPC0(0),
.ngpio = EXYNOS4_GPIO_C0_NR,
.label = "GPC0",
},
}, {
.chip = {
.base = EXYNOS4_GPC1(0),
.ngpio = EXYNOS4_GPIO_C1_NR,
.label = "GPC1",
},
}, {
.chip = {
.base = EXYNOS4_GPD0(0),
.ngpio = EXYNOS4_GPIO_D0_NR,
.label = "GPD0",
},
}, {
.chip = {
.base = EXYNOS4_GPD1(0),
.ngpio = EXYNOS4_GPIO_D1_NR,
.label = "GPD1",
},
}, {
.chip = {
.base = EXYNOS4_GPE0(0),
.ngpio = EXYNOS4_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
.base = EXYNOS4_GPE1(0),
.ngpio = EXYNOS4_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
.base = EXYNOS4_GPE2(0),
.ngpio = EXYNOS4_GPIO_E2_NR,
.label = "GPE2",
},
}, {
.chip = {
.base = EXYNOS4_GPE3(0),
.ngpio = EXYNOS4_GPIO_E3_NR,
.label = "GPE3",
},
}, {
.chip = {
.base = EXYNOS4_GPE4(0),
.ngpio = EXYNOS4_GPIO_E4_NR,
.label = "GPE4",
},
}, {
.chip = {
.base = EXYNOS4_GPF0(0),
.ngpio = EXYNOS4_GPIO_F0_NR,
.label = "GPF0",
},
}, {
.chip = {
.base = EXYNOS4_GPF1(0),
.ngpio = EXYNOS4_GPIO_F1_NR,
.label = "GPF1",
},
}, {
.chip = {
.base = EXYNOS4_GPF2(0),
.ngpio = EXYNOS4_GPIO_F2_NR,
.label = "GPF2",
},
}, {
.chip = {
.base = EXYNOS4_GPF3(0),
.ngpio = EXYNOS4_GPIO_F3_NR,
.label = "GPF3",
},
},
};
static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
{
.chip = {
.base = EXYNOS4_GPJ0(0),
.ngpio = EXYNOS4_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
.chip = {
.base = EXYNOS4_GPJ1(0),
.ngpio = EXYNOS4_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
.chip = {
.base = EXYNOS4_GPK0(0),
.ngpio = EXYNOS4_GPIO_K0_NR,
.label = "GPK0",
},
}, {
.chip = {
.base = EXYNOS4_GPK1(0),
.ngpio = EXYNOS4_GPIO_K1_NR,
.label = "GPK1",
},
}, {
.chip = {
.base = EXYNOS4_GPK2(0),
.ngpio = EXYNOS4_GPIO_K2_NR,
.label = "GPK2",
},
}, {
.chip = {
.base = EXYNOS4_GPK3(0),
.ngpio = EXYNOS4_GPIO_K3_NR,
.label = "GPK3",
},
}, {
.chip = {
.base = EXYNOS4_GPL0(0),
.ngpio = EXYNOS4_GPIO_L0_NR,
.label = "GPL0",
},
}, {
.chip = {
.base = EXYNOS4_GPL1(0),
.ngpio = EXYNOS4_GPIO_L1_NR,
.label = "GPL1",
},
}, {
.chip = {
.base = EXYNOS4_GPL2(0),
.ngpio = EXYNOS4_GPIO_L2_NR,
.label = "GPL2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY0(0),
.ngpio = EXYNOS4_GPIO_Y0_NR,
.label = "GPY0",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY1(0),
.ngpio = EXYNOS4_GPIO_Y1_NR,
.label = "GPY1",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY2(0),
.ngpio = EXYNOS4_GPIO_Y2_NR,
.label = "GPY2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY3(0),
.ngpio = EXYNOS4_GPIO_Y3_NR,
.label = "GPY3",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY4(0),
.ngpio = EXYNOS4_GPIO_Y4_NR,
.label = "GPY4",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY5(0),
.ngpio = EXYNOS4_GPIO_Y5_NR,
.label = "GPY5",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY6(0),
.ngpio = EXYNOS4_GPIO_Y6_NR,
.label = "GPY6",
},
}, {
.base = (S5P_VA_GPIO2 + 0xC00),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(0),
.chip = {
.base = EXYNOS4_GPX0(0),
.ngpio = EXYNOS4_GPIO_X0_NR,
.label = "GPX0",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO2 + 0xC20),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(8),
.chip = {
.base = EXYNOS4_GPX1(0),
.ngpio = EXYNOS4_GPIO_X1_NR,
.label = "GPX1",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO2 + 0xC40),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(16),
.chip = {
.base = EXYNOS4_GPX2(0),
.ngpio = EXYNOS4_GPIO_X2_NR,
.label = "GPX2",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO2 + 0xC60),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(24),
.chip = {
.base = EXYNOS4_GPX3(0),
.ngpio = EXYNOS4_GPIO_X3_NR,
.label = "GPX3",
.to_irq = samsung_gpiolib_to_irq,
},
},
};
static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
{
.chip = {
.base = EXYNOS4_GPZ(0),
.ngpio = EXYNOS4_GPIO_Z_NR,
.label = "GPZ",
},
},
};
static __init int exynos4_gpiolib_init(void)
{
struct s3c_gpio_chip *chip;
int i;
int group = 0;
int nr_chips;
/* GPIO part 1 */
chip = exynos4_gpio_part1_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO1 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
/* GPIO part 2 */
chip = exynos4_gpio_part2_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO2 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
/* GPIO part 3 */
chip = exynos4_gpio_part3_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO3 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
return 0;
}
core_initcall(exynos4_gpiolib_init);

Просмотреть файл

@ -1,205 +0,0 @@
/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* SAMSUNG - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#ifndef DEBUG_GPIO
#define gpio_dbg(x...) do { } while (0)
#else
#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The samsung_gpiolib_4bit routines are to control the gpio banks where
* the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
* following example:
*
* base + 0x00: Control register, 4 bits per gpio
* gpio n: 4 bits starting at (4*n)
* 0000 = input, 0001 = output, others mean special-function
* base + 0x04: Data register, 1 bit per gpio
* bit n: data bit n
*
* Note, since the data register is one bit per gpio and is at base + 0x4
* we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
* the output.
*/
static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
unsigned int offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long con;
con = __raw_readl(base + GPIOCON_OFF);
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, base + GPIOCON_OFF);
gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
return 0;
}
static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long con;
unsigned long dat;
con = __raw_readl(base + GPIOCON_OFF);
con &= ~(0xf << con_4bit_shift(offset));
con |= 0x1 << con_4bit_shift(offset);
dat = __raw_readl(base + GPIODAT_OFF);
if (value)
dat |= 1 << offset;
else
dat &= ~(1 << offset);
__raw_writel(dat, base + GPIODAT_OFF);
__raw_writel(con, base + GPIOCON_OFF);
__raw_writel(dat, base + GPIODAT_OFF);
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
return 0;
}
/* The next set of routines are for the case where the GPIO configuration
* registers are 4 bits per GPIO but there is more than one register (the
* bank has more than 8 GPIOs.
*
* This case is the similar to the 4 bit case, but the registers are as
* follows:
*
* base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
* gpio n: 4 bits starting at (4*n)
* 0000 = input, 0001 = output, others mean special-function
* base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
* gpio n: 4 bits starting at (4*n)
* 0000 = input, 0001 = output, others mean special-function
* base + 0x08: Data register, 1 bit per gpio
* bit n: data bit n
*
* To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
* store the 'base + 0x4' address so that these routines see the data
* register at ourchip->base + 0x04.
*/
static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
unsigned int offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
void __iomem *regcon = base;
unsigned long con;
if (offset > 7)
offset -= 8;
else
regcon -= 4;
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, regcon);
gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
return 0;
}
static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
void __iomem *regcon = base;
unsigned long con;
unsigned long dat;
unsigned con_offset = offset;
if (con_offset > 7)
con_offset -= 8;
else
regcon -= 4;
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(con_offset));
con |= 0x1 << con_4bit_shift(con_offset);
dat = __raw_readl(base + GPIODAT_OFF);
if (value)
dat |= 1 << offset;
else
dat &= ~(1 << offset);
__raw_writel(dat, base + GPIODAT_OFF);
__raw_writel(con, regcon);
__raw_writel(dat, base + GPIODAT_OFF);
gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
return 0;
}
void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = samsung_gpiolib_4bit_input;
chip->chip.direction_output = samsung_gpiolib_4bit_output;
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = samsung_gpiolib_4bit2_input;
chip->chip.direction_output = samsung_gpiolib_4bit2_output;
chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
int nr_chips)
{
for (; nr_chips > 0; nr_chips--, chip++) {
samsung_gpiolib_add_4bit(chip);
s3c_gpiolib_add(chip);
}
}
void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
int nr_chips)
{
for (; nr_chips > 0; nr_chips--, chip++) {
samsung_gpiolib_add_4bit2(chip);
s3c_gpiolib_add(chip);
}
}
void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
int nr_chips)
{
for (; nr_chips > 0; nr_chips--, chip++)
s3c_gpiolib_add(chip);
}

Просмотреть файл

@ -1,283 +0,0 @@
/*
* Copyright (c) 2008-2010 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/gpio-fns.h>
#include <mach/regs-gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <plat/pm.h>
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
return -EINVAL;
}
static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
unsigned long con;
local_irq_save(flags);
con = __raw_readl(base + 0x00);
dat = __raw_readl(base + 0x04);
dat &= ~(1 << offset);
if (value)
dat |= 1 << offset;
__raw_writel(dat, base + 0x04);
con &= ~(1 << offset);
__raw_writel(con, base + 0x00);
__raw_writel(dat, base + 0x04);
local_irq_restore(flags);
return 0;
}
static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
{
if (offset < 4)
return IRQ_EINT0 + offset;
if (offset < 8)
return IRQ_EINT4 + offset - 4;
return -EINVAL;
}
static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
.set_config = s3c_gpio_setcfg_s3c24xx_a,
.get_config = s3c_gpio_getcfg_s3c24xx_a,
};
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
.base = S3C2410_GPACON,
.pm = __gpio_pm(&s3c_gpio_pm_1bit),
.config = &s3c24xx_gpiocfg_banka,
.chip = {
.base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
.direction_input = s3c24xx_gpiolib_banka_input,
.direction_output = s3c24xx_gpiolib_banka_output,
},
},
[1] = {
.base = S3C2410_GPBCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
},
},
[2] = {
.base = S3C2410_GPCCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
},
},
[3] = {
.base = S3C2410_GPDCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
},
},
[4] = {
.base = S3C2410_GPECON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
},
},
[5] = {
.base = S3C2410_GPFCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
.to_irq = s3c24xx_gpiolib_bankf_toirq,
},
},
[6] = {
.base = S3C2410_GPGCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.irq_base = IRQ_EINT8,
.chip = {
.base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
.ngpio = 16,
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C2410_GPHCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPH(0),
.owner = THIS_MODULE,
.label = "GPIOH",
.ngpio = 11,
},
},
/* GPIOS for the S3C2443 and later devices. */
{
.base = S3C2440_GPJCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPJ(0),
.owner = THIS_MODULE,
.label = "GPIOJ",
.ngpio = 16,
},
}, {
.base = S3C2443_GPKCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPK(0),
.owner = THIS_MODULE,
.label = "GPIOK",
.ngpio = 16,
},
}, {
.base = S3C2443_GPLCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPL(0),
.owner = THIS_MODULE,
.label = "GPIOL",
.ngpio = 15,
},
}, {
.base = S3C2443_GPMCON,
.pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
.base = S3C2410_GPM(0),
.owner = THIS_MODULE,
.label = "GPIOM",
.ngpio = 2,
},
},
};
static __init int s3c24xx_gpiolib_init(void)
{
struct s3c_gpio_chip *chip = s3c24xx_gpios;
int gpn;
for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
if (!chip->config)
chip->config = &s3c24xx_gpiocfg_default;
s3c_gpiolib_add(chip);
}
return 0;
}
core_initcall(s3c24xx_gpiolib_init);
/* gpiolib wrappers until these are totally eliminated */
void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
{
int ret;
WARN_ON(to); /* should be none of these left */
if (!to) {
/* if pull is enabled, try first with up, and if that
* fails, try using down */
ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
if (ret)
s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
} else {
s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
}
}
EXPORT_SYMBOL(s3c2410_gpio_pullup);
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
/* do this via gpiolib until all users removed */
gpio_request(pin, "temporary");
gpio_set_value(pin, to);
gpio_free(pin);
}
EXPORT_SYMBOL(s3c2410_gpio_setpin);
unsigned int s3c2410_gpio_getpin(unsigned int pin)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long offs = pin - chip->chip.base;
return __raw_readl(chip->base + 0x04) & (1<< offs);
}
EXPORT_SYMBOL(s3c2410_gpio_getpin);
unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
{
unsigned long flags;
unsigned long misccr;
local_irq_save(flags);
misccr = __raw_readl(S3C24XX_MISCCR);
misccr &= ~clear;
misccr ^= change;
__raw_writel(misccr, S3C24XX_MISCCR);
local_irq_restore(flags);
return misccr;
}
EXPORT_SYMBOL(s3c2410_modify_misccr);

Просмотреть файл

@ -1,289 +0,0 @@
/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <mach/regs-gpio.h>
/* GPIO bank summary:
*
* Bank GPIOs Style SlpCon ExtInt Group
* A 8 4Bit Yes 1
* B 7 4Bit Yes 1
* C 8 4Bit Yes 2
* D 5 4Bit Yes 3
* E 5 4Bit Yes None
* F 16 2Bit Yes 4 [1]
* G 7 4Bit Yes 5
* H 10 4Bit[2] Yes 6
* I 16 2Bit Yes None
* J 12 2Bit Yes None
* K 16 4Bit[2] No None
* L 15 4Bit[2] No None
* M 6 4Bit No IRQ_EINT
* N 16 2Bit No IRQ_EINT
* O 16 2Bit Yes 7
* P 15 2Bit Yes 8
* Q 9 2Bit Yes 9
*
* [1] BANKF pins 14,15 do not form part of the external interrupt sources
* [2] BANK has two control registers, GPxCON0 and GPxCON1
*/
static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.get_config = s3c_gpio_getcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
.cfg_eint = 7,
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.get_config = s3c_gpio_getcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
.cfg_eint = 3,
.get_config = s3c_gpio_getcfg_s3c64xx_4bit,
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
static struct s3c_gpio_chip gpio_4bit[] = {
{
.base = S3C64XX_GPA_BASE,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPA(0),
.ngpio = S3C64XX_GPIO_A_NR,
.label = "GPA",
},
}, {
.base = S3C64XX_GPB_BASE,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPB(0),
.ngpio = S3C64XX_GPIO_B_NR,
.label = "GPB",
},
}, {
.base = S3C64XX_GPC_BASE,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPC(0),
.ngpio = S3C64XX_GPIO_C_NR,
.label = "GPC",
},
}, {
.base = S3C64XX_GPD_BASE,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPD(0),
.ngpio = S3C64XX_GPIO_D_NR,
.label = "GPD",
},
}, {
.base = S3C64XX_GPE_BASE,
.config = &gpio_4bit_cfg_noint,
.chip = {
.base = S3C64XX_GPE(0),
.ngpio = S3C64XX_GPIO_E_NR,
.label = "GPE",
},
}, {
.base = S3C64XX_GPG_BASE,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPG(0),
.ngpio = S3C64XX_GPIO_G_NR,
.label = "GPG",
},
}, {
.base = S3C64XX_GPM_BASE,
.config = &gpio_4bit_cfg_eint0011,
.chip = {
.base = S3C64XX_GPM(0),
.ngpio = S3C64XX_GPIO_M_NR,
.label = "GPM",
.to_irq = s3c64xx_gpio2int_gpm,
},
},
};
static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
static struct s3c_gpio_chip gpio_4bit2[] = {
{
.base = S3C64XX_GPH_BASE + 0x4,
.config = &gpio_4bit_cfg_eint0111,
.chip = {
.base = S3C64XX_GPH(0),
.ngpio = S3C64XX_GPIO_H_NR,
.label = "GPH",
},
}, {
.base = S3C64XX_GPK_BASE + 0x4,
.config = &gpio_4bit_cfg_noint,
.chip = {
.base = S3C64XX_GPK(0),
.ngpio = S3C64XX_GPIO_K_NR,
.label = "GPK",
},
}, {
.base = S3C64XX_GPL_BASE + 0x4,
.config = &gpio_4bit_cfg_eint0011,
.chip = {
.base = S3C64XX_GPL(0),
.ngpio = S3C64XX_GPIO_L_NR,
.label = "GPL",
.to_irq = s3c64xx_gpio2int_gpl,
},
},
};
static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
.cfg_eint = 2,
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
.cfg_eint = 3,
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_chip gpio_2bit[] = {
{
.base = S3C64XX_GPF_BASE,
.config = &gpio_2bit_cfg_eint11,
.chip = {
.base = S3C64XX_GPF(0),
.ngpio = S3C64XX_GPIO_F_NR,
.label = "GPF",
},
}, {
.base = S3C64XX_GPI_BASE,
.config = &gpio_2bit_cfg_noint,
.chip = {
.base = S3C64XX_GPI(0),
.ngpio = S3C64XX_GPIO_I_NR,
.label = "GPI",
},
}, {
.base = S3C64XX_GPJ_BASE,
.config = &gpio_2bit_cfg_noint,
.chip = {
.base = S3C64XX_GPJ(0),
.ngpio = S3C64XX_GPIO_J_NR,
.label = "GPJ",
},
}, {
.base = S3C64XX_GPN_BASE,
.irq_base = IRQ_EINT(0),
.config = &gpio_2bit_cfg_eint10,
.chip = {
.base = S3C64XX_GPN(0),
.ngpio = S3C64XX_GPIO_N_NR,
.label = "GPN",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = S3C64XX_GPO_BASE,
.config = &gpio_2bit_cfg_eint11,
.chip = {
.base = S3C64XX_GPO(0),
.ngpio = S3C64XX_GPIO_O_NR,
.label = "GPO",
},
}, {
.base = S3C64XX_GPP_BASE,
.config = &gpio_2bit_cfg_eint11,
.chip = {
.base = S3C64XX_GPP(0),
.ngpio = S3C64XX_GPIO_P_NR,
.label = "GPP",
},
}, {
.base = S3C64XX_GPQ_BASE,
.config = &gpio_2bit_cfg_eint11,
.chip = {
.base = S3C64XX_GPQ(0),
.ngpio = S3C64XX_GPIO_Q_NR,
.label = "GPQ",
},
},
};
static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
{
chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
}
static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
int nr_chips,
void (*fn)(struct s3c_gpio_chip *))
{
for (; nr_chips > 0; nr_chips--, chips++) {
if (fn)
(fn)(chips);
s3c_gpiolib_add(chips);
}
}
static __init int s3c64xx_gpiolib_init(void)
{
s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit),
samsung_gpiolib_add_4bit);
s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
samsung_gpiolib_add_4bit2);
s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
s3c64xx_gpiolib_add_2bit);
return 0;
}
core_initcall(s3c64xx_gpiolib_init);

Просмотреть файл

@ -1,510 +0,0 @@
/*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
/*
* S5P6440 GPIO bank summary:
*
* Bank GPIOs Style SlpCon ExtInt Group
* A 6 4Bit Yes 1
* B 7 4Bit Yes 1
* C 8 4Bit Yes 2
* F 2 2Bit Yes 4 [1]
* G 7 4Bit Yes 5
* H 10 4Bit[2] Yes 6
* I 16 2Bit Yes None
* J 12 2Bit Yes None
* N 16 2Bit No IRQ_EINT
* P 8 2Bit Yes 8
* R 15 4Bit[2] Yes 8
*
* S5P6450 GPIO bank summary:
*
* Bank GPIOs Style SlpCon ExtInt Group
* A 6 4Bit Yes 1
* B 7 4Bit Yes 1
* C 8 4Bit Yes 2
* D 8 4Bit Yes None
* F 2 2Bit Yes None
* G 14 4Bit[2] Yes 5
* H 10 4Bit[2] Yes 6
* I 16 2Bit Yes None
* J 12 2Bit Yes None
* K 5 4Bit Yes None
* N 16 2Bit No IRQ_EINT
* P 11 2Bit Yes 8
* Q 14 2Bit Yes None
* R 15 4Bit[2] Yes None
* S 8 2Bit Yes None
*
* [1] BANKF pins 14,15 do not form part of the external interrupt sources
* [2] BANK has two control registers, GPxCON0 and GPxCON1
*/
static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
unsigned int offset)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
void __iomem *regcon = base;
unsigned long con;
unsigned long flags;
switch (offset) {
case 6:
offset += 1;
case 0:
case 1:
case 2:
case 3:
case 4:
case 5:
regcon -= 4;
break;
default:
offset -= 7;
break;
}
s3c_gpio_lock(ourchip, flags);
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, regcon);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
void __iomem *base = ourchip->base;
void __iomem *regcon = base;
unsigned long con;
unsigned long dat;
unsigned long flags;
unsigned con_offset = offset;
switch (con_offset) {
case 6:
con_offset += 1;
case 0:
case 1:
case 2:
case 3:
case 4:
case 5:
regcon -= 4;
break;
default:
con_offset -= 7;
break;
}
s3c_gpio_lock(ourchip, flags);
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(con_offset));
con |= 0x1 << con_4bit_shift(con_offset);
dat = __raw_readl(base + GPIODAT_OFF);
if (value)
dat |= 1 << offset;
else
dat &= ~(1 << offset);
__raw_writel(con, regcon);
__raw_writel(dat, base + GPIODAT_OFF);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift;
u32 con;
switch (off) {
case 0:
case 1:
case 2:
case 3:
case 4:
case 5:
shift = (off & 7) * 4;
reg -= 4;
break;
case 6:
shift = ((off + 1) & 7) * 4;
reg -= 4;
default:
shift = ((off + 1) & 7) * 4;
break;
}
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0xf << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
{
.cfg_eint = 0,
}, {
.cfg_eint = 7,
}, {
.cfg_eint = 3,
.set_config = s5p64x0_gpio_setcfg_4bit_rbank,
}, {
.cfg_eint = 0,
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
}, {
.cfg_eint = 2,
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
}, {
.cfg_eint = 3,
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
},
};
static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
{
.base = S5P64X0_GPA_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6440_GPA(0),
.ngpio = S5P6440_GPIO_A_NR,
.label = "GPA",
},
}, {
.base = S5P64X0_GPB_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6440_GPB(0),
.ngpio = S5P6440_GPIO_B_NR,
.label = "GPB",
},
}, {
.base = S5P64X0_GPC_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6440_GPC(0),
.ngpio = S5P6440_GPIO_C_NR,
.label = "GPC",
},
}, {
.base = S5P64X0_GPG_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6440_GPG(0),
.ngpio = S5P6440_GPIO_G_NR,
.label = "GPG",
},
},
};
static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
{
.base = S5P64X0_GPH_BASE + 0x4,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6440_GPH(0),
.ngpio = S5P6440_GPIO_H_NR,
.label = "GPH",
},
},
};
static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
{
.base = S5P64X0_GPR_BASE + 0x4,
.config = &s5p64x0_gpio_cfgs[2],
.chip = {
.base = S5P6440_GPR(0),
.ngpio = S5P6440_GPIO_R_NR,
.label = "GPR",
},
},
};
static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
{
.base = S5P64X0_GPF_BASE,
.config = &s5p64x0_gpio_cfgs[5],
.chip = {
.base = S5P6440_GPF(0),
.ngpio = S5P6440_GPIO_F_NR,
.label = "GPF",
},
}, {
.base = S5P64X0_GPI_BASE,
.config = &s5p64x0_gpio_cfgs[3],
.chip = {
.base = S5P6440_GPI(0),
.ngpio = S5P6440_GPIO_I_NR,
.label = "GPI",
},
}, {
.base = S5P64X0_GPJ_BASE,
.config = &s5p64x0_gpio_cfgs[3],
.chip = {
.base = S5P6440_GPJ(0),
.ngpio = S5P6440_GPIO_J_NR,
.label = "GPJ",
},
}, {
.base = S5P64X0_GPN_BASE,
.config = &s5p64x0_gpio_cfgs[4],
.chip = {
.base = S5P6440_GPN(0),
.ngpio = S5P6440_GPIO_N_NR,
.label = "GPN",
},
}, {
.base = S5P64X0_GPP_BASE,
.config = &s5p64x0_gpio_cfgs[5],
.chip = {
.base = S5P6440_GPP(0),
.ngpio = S5P6440_GPIO_P_NR,
.label = "GPP",
},
},
};
static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
{
.base = S5P64X0_GPA_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPA(0),
.ngpio = S5P6450_GPIO_A_NR,
.label = "GPA",
},
}, {
.base = S5P64X0_GPB_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPB(0),
.ngpio = S5P6450_GPIO_B_NR,
.label = "GPB",
},
}, {
.base = S5P64X0_GPC_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPC(0),
.ngpio = S5P6450_GPIO_C_NR,
.label = "GPC",
},
}, {
.base = S5P6450_GPD_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPD(0),
.ngpio = S5P6450_GPIO_D_NR,
.label = "GPD",
},
}, {
.base = S5P6450_GPK_BASE,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPK(0),
.ngpio = S5P6450_GPIO_K_NR,
.label = "GPK",
},
},
};
static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
{
.base = S5P64X0_GPG_BASE + 0x4,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPG(0),
.ngpio = S5P6450_GPIO_G_NR,
.label = "GPG",
},
}, {
.base = S5P64X0_GPH_BASE + 0x4,
.config = &s5p64x0_gpio_cfgs[1],
.chip = {
.base = S5P6450_GPH(0),
.ngpio = S5P6450_GPIO_H_NR,
.label = "GPH",
},
},
};
static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
{
.base = S5P64X0_GPR_BASE + 0x4,
.config = &s5p64x0_gpio_cfgs[2],
.chip = {
.base = S5P6450_GPR(0),
.ngpio = S5P6450_GPIO_R_NR,
.label = "GPR",
},
},
};
static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
{
.base = S5P64X0_GPF_BASE,
.config = &s5p64x0_gpio_cfgs[5],
.chip = {
.base = S5P6450_GPF(0),
.ngpio = S5P6450_GPIO_F_NR,
.label = "GPF",
},
}, {
.base = S5P64X0_GPI_BASE,
.config = &s5p64x0_gpio_cfgs[3],
.chip = {
.base = S5P6450_GPI(0),
.ngpio = S5P6450_GPIO_I_NR,
.label = "GPI",
},
}, {
.base = S5P64X0_GPJ_BASE,
.config = &s5p64x0_gpio_cfgs[3],
.chip = {
.base = S5P6450_GPJ(0),
.ngpio = S5P6450_GPIO_J_NR,
.label = "GPJ",
},
}, {
.base = S5P64X0_GPN_BASE,
.config = &s5p64x0_gpio_cfgs[4],
.chip = {
.base = S5P6450_GPN(0),
.ngpio = S5P6450_GPIO_N_NR,
.label = "GPN",
},
}, {
.base = S5P64X0_GPP_BASE,
.config = &s5p64x0_gpio_cfgs[5],
.chip = {
.base = S5P6450_GPP(0),
.ngpio = S5P6450_GPIO_P_NR,
.label = "GPP",
},
}, {
.base = S5P6450_GPQ_BASE,
.config = &s5p64x0_gpio_cfgs[4],
.chip = {
.base = S5P6450_GPQ(0),
.ngpio = S5P6450_GPIO_Q_NR,
.label = "GPQ",
},
}, {
.base = S5P6450_GPS_BASE,
.config = &s5p64x0_gpio_cfgs[5],
.chip = {
.base = S5P6450_GPS(0),
.ngpio = S5P6450_GPIO_S_NR,
.label = "GPS",
},
},
};
void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
{
for (; nr_chips > 0; nr_chips--, chipcfg++) {
if (!chipcfg->set_config)
chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit;
if (!chipcfg->get_config)
chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit;
if (!chipcfg->set_pull)
chipcfg->set_pull = s3c_gpio_setpull_updown;
if (!chipcfg->get_pull)
chipcfg->get_pull = s3c_gpio_getpull_updown;
}
}
static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
int nr_chips)
{
for (; nr_chips > 0; nr_chips--, chip++) {
chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
chip->chip.direction_output =
s5p64x0_gpiolib_rbank_4bit2_output;
s3c_gpiolib_add(chip);
}
}
static int __init s5p64x0_gpiolib_init(void)
{
unsigned int chipid;
chipid = __raw_readl(S5P64X0_SYS_ID);
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
if ((chipid & 0xff000) == 0x50000) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
ARRAY_SIZE(s5p6450_gpio_4bit));
samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
ARRAY_SIZE(s5p6450_gpio_4bit2));
s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
} else {
samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
ARRAY_SIZE(s5p6440_gpio_2bit));
samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
ARRAY_SIZE(s5p6440_gpio_4bit));
samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
ARRAY_SIZE(s5p6440_gpio_4bit2));
s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
}
return 0;
}
core_initcall(s5p64x0_gpiolib_init);

Просмотреть файл

@ -1,354 +0,0 @@
/*
* S5PC100 - GPIOlib support
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2009 Samsung Electronics Co
* Kyungmin Park <kyungmin.park@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
/* S5PC100 GPIO bank summary:
*
* Bank GPIOs Style INT Type
* A0 8 4Bit GPIO_INT0
* A1 5 4Bit GPIO_INT1
* B 8 4Bit GPIO_INT2
* C 5 4Bit GPIO_INT3
* D 7 4Bit GPIO_INT4
* E0 8 4Bit GPIO_INT5
* E1 6 4Bit GPIO_INT6
* F0 8 4Bit GPIO_INT7
* F1 8 4Bit GPIO_INT8
* F2 8 4Bit GPIO_INT9
* F3 4 4Bit GPIO_INT10
* G0 8 4Bit GPIO_INT11
* G1 3 4Bit GPIO_INT12
* G2 7 4Bit GPIO_INT13
* G3 7 4Bit GPIO_INT14
* H0 8 4Bit WKUP_INT
* H1 8 4Bit WKUP_INT
* H2 8 4Bit WKUP_INT
* H3 8 4Bit WKUP_INT
* I 8 4Bit GPIO_INT15
* J0 8 4Bit GPIO_INT16
* J1 5 4Bit GPIO_INT17
* J2 8 4Bit GPIO_INT18
* J3 8 4Bit GPIO_INT19
* J4 4 4Bit GPIO_INT20
* K0 8 4Bit None
* K1 6 4Bit None
* K2 8 4Bit None
* K3 8 4Bit None
* L0 8 4Bit None
* L1 8 4Bit None
* L2 8 4Bit None
* L3 8 4Bit None
*/
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_cfg_eint = {
.cfg_eint = 0xf,
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
/*
* GPIO bank's base address given the index of the bank in the
* list of all gpio banks.
*/
#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
/*
* Following are the gpio banks in S5PC100.
*
* The 'config' member when left to NULL, is initialized to the default
* structure gpio_cfg in the init function below.
*
* The 'base' member is also initialized in the init function below.
* Note: The initialization of 'base' member of s3c_gpio_chip structure
* uses the above macro and depends on the banks being listed in order here.
*/
static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
{
.chip = {
.base = S5PC100_GPA0(0),
.ngpio = S5PC100_GPIO_A0_NR,
.label = "GPA0",
},
}, {
.chip = {
.base = S5PC100_GPA1(0),
.ngpio = S5PC100_GPIO_A1_NR,
.label = "GPA1",
},
}, {
.chip = {
.base = S5PC100_GPB(0),
.ngpio = S5PC100_GPIO_B_NR,
.label = "GPB",
},
}, {
.chip = {
.base = S5PC100_GPC(0),
.ngpio = S5PC100_GPIO_C_NR,
.label = "GPC",
},
}, {
.chip = {
.base = S5PC100_GPD(0),
.ngpio = S5PC100_GPIO_D_NR,
.label = "GPD",
},
}, {
.chip = {
.base = S5PC100_GPE0(0),
.ngpio = S5PC100_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
.base = S5PC100_GPE1(0),
.ngpio = S5PC100_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
.base = S5PC100_GPF0(0),
.ngpio = S5PC100_GPIO_F0_NR,
.label = "GPF0",
},
}, {
.chip = {
.base = S5PC100_GPF1(0),
.ngpio = S5PC100_GPIO_F1_NR,
.label = "GPF1",
},
}, {
.chip = {
.base = S5PC100_GPF2(0),
.ngpio = S5PC100_GPIO_F2_NR,
.label = "GPF2",
},
}, {
.chip = {
.base = S5PC100_GPF3(0),
.ngpio = S5PC100_GPIO_F3_NR,
.label = "GPF3",
},
}, {
.chip = {
.base = S5PC100_GPG0(0),
.ngpio = S5PC100_GPIO_G0_NR,
.label = "GPG0",
},
}, {
.chip = {
.base = S5PC100_GPG1(0),
.ngpio = S5PC100_GPIO_G1_NR,
.label = "GPG1",
},
}, {
.chip = {
.base = S5PC100_GPG2(0),
.ngpio = S5PC100_GPIO_G2_NR,
.label = "GPG2",
},
}, {
.chip = {
.base = S5PC100_GPG3(0),
.ngpio = S5PC100_GPIO_G3_NR,
.label = "GPG3",
},
}, {
.chip = {
.base = S5PC100_GPI(0),
.ngpio = S5PC100_GPIO_I_NR,
.label = "GPI",
},
}, {
.chip = {
.base = S5PC100_GPJ0(0),
.ngpio = S5PC100_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
.chip = {
.base = S5PC100_GPJ1(0),
.ngpio = S5PC100_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
.chip = {
.base = S5PC100_GPJ2(0),
.ngpio = S5PC100_GPIO_J2_NR,
.label = "GPJ2",
},
}, {
.chip = {
.base = S5PC100_GPJ3(0),
.ngpio = S5PC100_GPIO_J3_NR,
.label = "GPJ3",
},
}, {
.chip = {
.base = S5PC100_GPJ4(0),
.ngpio = S5PC100_GPIO_J4_NR,
.label = "GPJ4",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK0(0),
.ngpio = S5PC100_GPIO_K0_NR,
.label = "GPK0",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK1(0),
.ngpio = S5PC100_GPIO_K1_NR,
.label = "GPK1",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK2(0),
.ngpio = S5PC100_GPIO_K2_NR,
.label = "GPK2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPK3(0),
.ngpio = S5PC100_GPIO_K3_NR,
.label = "GPK3",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL0(0),
.ngpio = S5PC100_GPIO_L0_NR,
.label = "GPL0",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL1(0),
.ngpio = S5PC100_GPIO_L1_NR,
.label = "GPL1",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL2(0),
.ngpio = S5PC100_GPIO_L2_NR,
.label = "GPL2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL3(0),
.ngpio = S5PC100_GPIO_L3_NR,
.label = "GPL3",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PC100_GPL4(0),
.ngpio = S5PC100_GPIO_L4_NR,
.label = "GPL4",
},
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_eint,
.irq_base = IRQ_EINT(0),
.chip = {
.base = S5PC100_GPH0(0),
.ngpio = S5PC100_GPIO_H0_NR,
.label = "GPH0",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC20),
.config = &gpio_cfg_eint,
.irq_base = IRQ_EINT(8),
.chip = {
.base = S5PC100_GPH1(0),
.ngpio = S5PC100_GPIO_H1_NR,
.label = "GPH1",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC40),
.config = &gpio_cfg_eint,
.irq_base = IRQ_EINT(16),
.chip = {
.base = S5PC100_GPH2(0),
.ngpio = S5PC100_GPIO_H2_NR,
.label = "GPH2",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC60),
.config = &gpio_cfg_eint,
.irq_base = IRQ_EINT(24),
.chip = {
.base = S5PC100_GPH3(0),
.ngpio = S5PC100_GPIO_H3_NR,
.label = "GPH3",
.to_irq = samsung_gpiolib_to_irq,
},
},
};
static __init int s5pc100_gpiolib_init(void)
{
struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
int gpioint_group = 0;
int i;
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL) {
chip->config = &gpio_cfg;
chip->group = gpioint_group++;
}
if (chip->base == NULL)
chip->base = S5PC100_BANK_BASE(i);
}
samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
return 0;
}
core_initcall(s5pc100_gpiolib_init);

Просмотреть файл

@ -1,287 +0,0 @@
/*
* S5PV210 - GPIOlib support
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <mach/map.h>
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
static struct s3c_gpio_cfg gpio_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
.get_pull = s3c_gpio_getpull_updown,
};
/* GPIO bank's base address given the index of the bank in the
* list of all gpio banks.
*/
#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
/*
* Following are the gpio banks in v210.
*
* The 'config' member when left to NULL, is initialized to the default
* structure gpio_cfg in the init function below.
*
* The 'base' member is also initialized in the init function below.
* Note: The initialization of 'base' member of s3c_gpio_chip structure
* uses the above macro and depends on the banks being listed in order here.
*/
static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
{
.chip = {
.base = S5PV210_GPA0(0),
.ngpio = S5PV210_GPIO_A0_NR,
.label = "GPA0",
},
}, {
.chip = {
.base = S5PV210_GPA1(0),
.ngpio = S5PV210_GPIO_A1_NR,
.label = "GPA1",
},
}, {
.chip = {
.base = S5PV210_GPB(0),
.ngpio = S5PV210_GPIO_B_NR,
.label = "GPB",
},
}, {
.chip = {
.base = S5PV210_GPC0(0),
.ngpio = S5PV210_GPIO_C0_NR,
.label = "GPC0",
},
}, {
.chip = {
.base = S5PV210_GPC1(0),
.ngpio = S5PV210_GPIO_C1_NR,
.label = "GPC1",
},
}, {
.chip = {
.base = S5PV210_GPD0(0),
.ngpio = S5PV210_GPIO_D0_NR,
.label = "GPD0",
},
}, {
.chip = {
.base = S5PV210_GPD1(0),
.ngpio = S5PV210_GPIO_D1_NR,
.label = "GPD1",
},
}, {
.chip = {
.base = S5PV210_GPE0(0),
.ngpio = S5PV210_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
.base = S5PV210_GPE1(0),
.ngpio = S5PV210_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
.base = S5PV210_GPF0(0),
.ngpio = S5PV210_GPIO_F0_NR,
.label = "GPF0",
},
}, {
.chip = {
.base = S5PV210_GPF1(0),
.ngpio = S5PV210_GPIO_F1_NR,
.label = "GPF1",
},
}, {
.chip = {
.base = S5PV210_GPF2(0),
.ngpio = S5PV210_GPIO_F2_NR,
.label = "GPF2",
},
}, {
.chip = {
.base = S5PV210_GPF3(0),
.ngpio = S5PV210_GPIO_F3_NR,
.label = "GPF3",
},
}, {
.chip = {
.base = S5PV210_GPG0(0),
.ngpio = S5PV210_GPIO_G0_NR,
.label = "GPG0",
},
}, {
.chip = {
.base = S5PV210_GPG1(0),
.ngpio = S5PV210_GPIO_G1_NR,
.label = "GPG1",
},
}, {
.chip = {
.base = S5PV210_GPG2(0),
.ngpio = S5PV210_GPIO_G2_NR,
.label = "GPG2",
},
}, {
.chip = {
.base = S5PV210_GPG3(0),
.ngpio = S5PV210_GPIO_G3_NR,
.label = "GPG3",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_GPI(0),
.ngpio = S5PV210_GPIO_I_NR,
.label = "GPI",
},
}, {
.chip = {
.base = S5PV210_GPJ0(0),
.ngpio = S5PV210_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
.chip = {
.base = S5PV210_GPJ1(0),
.ngpio = S5PV210_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
.chip = {
.base = S5PV210_GPJ2(0),
.ngpio = S5PV210_GPIO_J2_NR,
.label = "GPJ2",
},
}, {
.chip = {
.base = S5PV210_GPJ3(0),
.ngpio = S5PV210_GPIO_J3_NR,
.label = "GPJ3",
},
}, {
.chip = {
.base = S5PV210_GPJ4(0),
.ngpio = S5PV210_GPIO_J4_NR,
.label = "GPJ4",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP01(0),
.ngpio = S5PV210_GPIO_MP01_NR,
.label = "MP01",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP02(0),
.ngpio = S5PV210_GPIO_MP02_NR,
.label = "MP02",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP03(0),
.ngpio = S5PV210_GPIO_MP03_NR,
.label = "MP03",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP04(0),
.ngpio = S5PV210_GPIO_MP04_NR,
.label = "MP04",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP05(0),
.ngpio = S5PV210_GPIO_MP05_NR,
.label = "MP05",
},
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(0),
.chip = {
.base = S5PV210_GPH0(0),
.ngpio = S5PV210_GPIO_H0_NR,
.label = "GPH0",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC20),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(8),
.chip = {
.base = S5PV210_GPH1(0),
.ngpio = S5PV210_GPIO_H1_NR,
.label = "GPH1",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC40),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(16),
.chip = {
.base = S5PV210_GPH2(0),
.ngpio = S5PV210_GPIO_H2_NR,
.label = "GPH2",
.to_irq = samsung_gpiolib_to_irq,
},
}, {
.base = (S5P_VA_GPIO + 0xC60),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(24),
.chip = {
.base = S5PV210_GPH3(0),
.ngpio = S5PV210_GPIO_H3_NR,
.label = "GPH3",
.to_irq = samsung_gpiolib_to_irq,
},
},
};
static __init int s5pv210_gpiolib_init(void)
{
struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
int gpioint_group = 0;
int i = 0;
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL) {
chip->config = &gpio_cfg;
chip->group = gpioint_group++;
}
if (chip->base == NULL)
chip->base = S5PV210_BANK_BASE(i);
}
samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
return 0;
}
core_initcall(s5pv210_gpiolib_init);

2686
drivers/gpio/gpio-samsung.c Normal file

Разница между файлами не показана из-за своего большого размера Загрузить разницу