gpio: move tca9554 from pcf857x to pca953x

The TCA9554 doesn't work with the pcf857x driver, trying to change the direction
gives a NAK bailout error.

TCA9554 is similar to the PCA9554, thus change the driver.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/gpio/Kconfig

@@ -752,7 +752,7 @@ config GPIO_PCA953X
 	  4 bits:	pca9536, pca9537
 
 	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
-			pca9556, pca9557, pca9574, tca6408, xra1202
+			pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
 
 	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
 			tca6416

drivers/gpio/gpio-pca953x.c

@@ -82,6 +82,7 @@ static const struct i2c_device_id pca953x_id[] = {
 	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
 	{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
 	{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "tca9554", 8  | PCA953X_TYPE | PCA_INT, },
 	{ "xra1202", 8  | PCA953X_TYPE },
 	{ }
 };

drivers/gpio/gpio-pcf857x.c

@@ -46,7 +46,6 @@ static const struct i2c_device_id pcf857x_id[] = {
 	{ "pca9675", 16 },
 	{ "max7328", 8 },
 	{ "max7329", 8 },
-	{ "tca9554", 8 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pcf857x_id);
@@ -66,7 +65,6 @@ static const struct of_device_id pcf857x_of_table[] = {
 	{ .compatible = "nxp,pca9675" },
 	{ .compatible = "maxim,max7328" },
 	{ .compatible = "maxim,max7329" },
-	{ .compatible = "ti,tca9554" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pcf857x_of_table);