diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 773b880d5577..5692edb3491e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -300,6 +300,7 @@ config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 select U3_DART + select MPIC_BROKEN_U3 select GENERIC_TBSYNC default y diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 523f35087e81..f73a16e9867a 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -34,7 +34,7 @@ #ifdef DEBUG #include -#define DBG(fmt...) udbg_printf(fmt) +#define DBG(fmt...) printk(fmt) #else #define DBG(fmt...) #endif @@ -323,6 +323,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); if (!addrs) return; + DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs); for (; proplen >= 20; proplen -= 20, addrs += 5) { flags = pci_parse_of_flags(addrs[0]); if (!flags) @@ -332,6 +333,9 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) if (!size) continue; i = addrs[0] & 0xff; + DBG(" base: %llx, size: %llx, i: %x\n", + (unsigned long long)base, (unsigned long long)size, i); + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; } else if (i == dev->rom_base_reg) { @@ -362,6 +366,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, if (type == NULL) type = ""; + DBG(" create device, devfn: %x, type: %s\n", devfn, type); + memset(dev, 0, sizeof(struct pci_dev)); dev->bus = bus; dev->sysdata = node; @@ -381,6 +387,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); dev->class = get_int_prop(node, "class-code", 0); + DBG(" class: 0x%x\n", dev->class); + dev->current_state = 4; /* unknown power state */ if (!strcmp(type, "pci")) { @@ -402,6 +410,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, pci_parse_of_addrs(node, dev); + DBG(" adding to system ...\n"); + pci_device_add(dev, bus); /* XXX pci_scan_msi_device(dev); */ @@ -418,15 +428,21 @@ void __devinit of_scan_bus(struct device_node *node, int reglen, devfn; struct pci_dev *dev; + DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number); + while ((child = of_get_next_child(node, child)) != NULL) { + DBG(" * %s\n", child->full_name); reg = (u32 *) get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; devfn = (reg[0] >> 8) & 0xff; + /* create a new pci_dev for this device */ dev = of_create_pci_dev(child, bus, devfn); if (!dev) continue; + DBG("dev header type: %x\n", dev->hdr_type); + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) of_scan_pci_bridge(child, dev); @@ -446,16 +462,18 @@ void __devinit of_scan_pci_bridge(struct device_node *node, unsigned int flags; u64 size; + DBG("of_scan_pci_bridge(%s)\n", node->full_name); + /* parse bus-range property */ busrange = (u32 *) get_property(node, "bus-range", &len); if (busrange == NULL || len != 8) { - printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", + printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", node->full_name); return; } ranges = (u32 *) get_property(node, "ranges", &len); if (ranges == NULL) { - printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", + printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", node->full_name); return; } @@ -509,10 +527,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node, } sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), bus->number); + DBG(" bus name: %s\n", bus->name); mode = PCI_PROBE_NORMAL; if (ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode(bus); + DBG(" probe mode: %d\n", mode); + if (mode == PCI_PROBE_DEVTREE) of_scan_bus(node, bus); else if (mode == PCI_PROBE_NORMAL) @@ -528,6 +549,8 @@ void __devinit scan_phb(struct pci_controller *hose) int i, mode; struct resource *res; + DBG("Scanning PHB %s\n", node ? node->full_name : ""); + bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); if (bus == NULL) { printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", @@ -552,8 +575,9 @@ void __devinit scan_phb(struct pci_controller *hose) mode = PCI_PROBE_NORMAL; #ifdef CONFIG_PPC_MULTIPLATFORM - if (ppc_md.pci_probe_mode) + if (node && ppc_md.pci_probe_mode) mode = ppc_md.pci_probe_mode(bus); + DBG(" probe mode: %d\n", mode); if (mode == PCI_PROBE_DEVTREE) { bus->subordinate = hose->last_busno; of_scan_bus(node, bus); @@ -842,8 +866,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file, * Returns a negative error code on failure, zero on success. */ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine) + enum pci_mmap_state mmap_state, int write_combine) { unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; struct resource *rp; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 1b97e13657e5..977ee3adaf2d 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -298,6 +298,16 @@ static int __devinit finish_node_interrupts(struct device_node *np, int i, j, n, sense; unsigned int *irq, virq; struct device_node *ic; + int trace = 0; + + //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0) +#define TRACE(fmt...) + + if (!strcmp(np->name, "smu-doorbell")) + trace = 1; + + TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n", + num_interrupt_controllers); if (num_interrupt_controllers == 0) { /* @@ -332,11 +342,12 @@ static int __devinit finish_node_interrupts(struct device_node *np, } ints = (unsigned int *) get_property(np, "interrupts", &intlen); + TRACE("ints=%p, intlen=%d\n", ints, intlen); if (ints == NULL) return 0; intrcells = prom_n_intr_cells(np); intlen /= intrcells * sizeof(unsigned int); - + TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen); np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); if (!np->intrs) return -ENOMEM; @@ -347,6 +358,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, intrcount = 0; for (i = 0; i < intlen; ++i, ints += intrcells) { n = map_interrupt(&irq, &ic, np, ints, intrcells); + TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n); if (n <= 0) continue; @@ -357,6 +369,7 @@ static int __devinit finish_node_interrupts(struct device_node *np, np->intrs[intrcount].sense = map_isa_senses[sense]; } else { virq = virt_irq_create_mapping(irq[0]); + TRACE("virq=%d\n", virq); #ifdef CONFIG_PPC64 if (virq == NO_IRQ) { printk(KERN_CRIT "Could not allocate interrupt" @@ -366,6 +379,12 @@ static int __devinit finish_node_interrupts(struct device_node *np, #endif np->intrs[intrcount].line = irq_offset_up(virq); sense = (n > 1)? (irq[1] & 3): 1; + + /* Apple uses bits in there in a different way, let's + * only keep the real sense bit on macs + */ + if (_machine == PLATFORM_POWERMAC) + sense &= 0x1; np->intrs[intrcount].sense = map_mpic_senses[sense]; } @@ -375,12 +394,13 @@ static int __devinit finish_node_interrupts(struct device_node *np, char *name = get_property(ic->parent, "name", NULL); if (name && !strcmp(name, "u3")) np->intrs[intrcount].line += 128; - else if (!(name && !strcmp(name, "mac-io"))) + else if (!(name && (!strcmp(name, "mac-io") || + !strcmp(name, "u4")))) /* ignore other cascaded controllers, such as the k2-sata-root */ break; } -#endif +#endif /* CONFIG_PPC64 */ if (n > 2) { printk("hmmm, got %d intr cells for %s:", n, np->full_name); diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index a058285a70e7..9567d9474c80 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -110,10 +110,12 @@ static int early_console_initialized; void __init disable_early_printk(void) { +#if 1 if (!early_console_initialized) return; unregister_console(&udbg_console); early_console_initialized = 0; +#endif } /* called by setup_system */ diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 65fe4c166a68..dd73e38bfb7d 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -195,7 +195,7 @@ static void __init maple_init_early(void) /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_u3(); + iommu_init_early_dart(); DBG(" <- maple_init_early\n"); } @@ -257,7 +257,7 @@ static int __init maple_probe(int platform) * occupies having to be broken up so the DART itself is not * part of the cacheable linar mapping */ - alloc_u3_dart_table(); + alloc_dart_table(); return 1; } diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index b1f896952b1b..d2915d64d45e 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -101,7 +101,8 @@ static const char *macio_names[] = "Keylargo", "Pangea", "Intrepid", - "K2" + "K2", + "Shasta", }; @@ -119,7 +120,7 @@ static const char *macio_names[] = static struct device_node *uninorth_node; static u32 __iomem *uninorth_base; static u32 uninorth_rev; -static int uninorth_u3; +static int uninorth_maj; static void __iomem *u3_ht; /* @@ -1399,8 +1400,15 @@ static long g5_fw_enable(struct device_node *node, long param, long value) static long g5_mpic_enable(struct device_node *node, long param, long value) { unsigned long flags; + struct device_node *parent = of_get_parent(node); + int is_u3; - if (node->parent == NULL || strcmp(node->parent->name, "u3")) + if (parent == NULL) + return 0; + is_u3 = strcmp(parent->name, "u3") == 0 || + strcmp(parent->name, "u4") == 0; + of_node_put(parent); + if (!is_u3) return 0; LOCK(flags); @@ -1464,7 +1472,7 @@ static long g5_i2s_enable(struct device_node *node, long param, long value) }, }; - if (macio->type != macio_keylargo2 /* && macio->type != macio_shasta*/) + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; if (strncmp(node->name, "i2s-", 4)) return -ENODEV; @@ -1473,11 +1481,9 @@ static long g5_i2s_enable(struct device_node *node, long param, long value) case 0: case 1: break; -#if 0 case 2: if (macio->type == macio_shasta) break; -#endif default: return -ENODEV; } @@ -1508,7 +1514,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) struct device_node *np; macio = &macio_chips[0]; - if (macio->type != macio_keylargo2) + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; np = find_path_device("/cpus"); @@ -1547,7 +1553,8 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) */ void g5_phy_disable_cpu1(void) { - UN_OUT(U3_API_PHY_CONFIG_1, 0); + if (uninorth_maj == 3) + UN_OUT(U3_API_PHY_CONFIG_1, 0); } #endif /* CONFIG_POWER4 */ @@ -2462,6 +2469,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_POWERMAC_G5_U3L, g5_features, 0, }, + { "PowerMac11,2", "PowerMac G5 Dual Core", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac12,1", "iMac G5 (iSight)", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, { "RackMac3,1", "XServe G5", PMAC_TYPE_XSERVE_G5, g5_features, 0, @@ -2574,6 +2589,11 @@ static int __init probe_motherboard(void) pmac_mb.model_name = "Unknown K2-based"; pmac_mb.features = g5_features; break; + case macio_shasta: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; + pmac_mb.model_name = "Unknown Shasta-based"; + pmac_mb.features = g5_features; + break; #endif /* CONFIG_POWER4 */ default: return -ENODEV; @@ -2651,7 +2671,12 @@ static void __init probe_uninorth(void) /* Locate G5 u3 */ if (uninorth_node == NULL) { uninorth_node = of_find_node_by_name(NULL, "u3"); - uninorth_u3 = 1; + uninorth_maj = 3; + } + /* Locate G5 u4 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u4"); + uninorth_maj = 4; } if (uninorth_node == NULL) return; @@ -2664,12 +2689,13 @@ static void __init probe_uninorth(void) return; uninorth_base = ioremap(address, 0x40000); uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_u3) + if (uninorth_maj == 3 || uninorth_maj == 4) u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - printk(KERN_INFO "Found %s memory controller & host bridge," - " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth", - uninorth_rev); + printk(KERN_INFO "Found %s memory controller & host bridge" + " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : + uninorth_maj == 4 ? "U4" : "UniNorth", + (unsigned int)address, uninorth_rev); printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); /* Set the arbitrer QAck delay according to what Apple does @@ -2677,7 +2703,8 @@ static void __init probe_uninorth(void) if (uninorth_rev < 0x11) { actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : - UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UNI_N_ARB_CTRL_QACK_DELAY) << + UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; UN_OUT(UNI_N_ARB_CTRL, actrl); } @@ -2685,7 +2712,8 @@ static void __init probe_uninorth(void) * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI * memory timeout */ - if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0) + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || + uninorth_rev == 0xc0) UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); } @@ -2736,12 +2764,14 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ node->full_name); return; } - if (type == macio_keylargo) { + if (type == macio_keylargo || type == macio_keylargo2) { u32 *did = (u32 *)get_property(node, "device-id", NULL); if (*did == 0x00000025) type = macio_pangea; if (*did == 0x0000003e) type = macio_intrepid; + if (*did == 0x0000004f) + type = macio_shasta; } macio_chips[i].of_node = node; macio_chips[i].type = type; @@ -2840,7 +2870,8 @@ set_initial_features(void) } #ifdef CONFIG_POWER4 - if (macio_chips[0].type == macio_keylargo2) { + if (macio_chips[0].type == macio_keylargo2 || + macio_chips[0].type == macio_shasta) { #ifndef CONFIG_SMP /* On SMP machines running UP, we have the second CPU eating * bus cycles. We need to take it off the bus. This is done diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 5aab261075de..f671ed253901 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1,7 +1,7 @@ /* * Support for PCI bridges found on Power Macintoshes. * - * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org) + * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org) * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) * * This program is free software; you can redistribute it and/or @@ -25,7 +25,7 @@ #include #include #ifdef CONFIG_PPC64 -#include +//#include #include #endif @@ -44,6 +44,7 @@ static int add_bridge(struct device_node *dev); static int has_uninorth; #ifdef CONFIG_PPC64 static struct pci_controller *u3_agp; +static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; #endif /* CONFIG_PPC64 */ @@ -97,11 +98,8 @@ static void __init fixup_bus_range(struct device_node *bridge) /* Lookup the "bus-range" property for the hose */ bus_range = (int *) get_property(bridge, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s\n", - bridge->full_name); + if (bus_range == NULL || len < 2 * sizeof(int)) return; - } bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } @@ -128,14 +126,14 @@ static void __init fixup_bus_range(struct device_node *bridge) */ #define MACRISC_CFA0(devfn, off) \ - ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ - | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ - | (((unsigned long)(off)) & 0xFCUL)) + ((1 << (unsigned int)PCI_SLOT(dev_fn)) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned int)(off)) & 0xFCUL)) #define MACRISC_CFA1(bus, devfn, off) \ - ((((unsigned long)(bus)) << 16) \ - |(((unsigned long)(devfn)) << 8) \ - |(((unsigned long)(off)) & 0xFCUL) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + |(((unsigned int)(off)) & 0xFCUL) \ |1UL) static unsigned long macrisc_cfg_access(struct pci_controller* hose, @@ -168,7 +166,8 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -199,7 +198,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = macrisc_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -234,12 +234,13 @@ static struct pci_ops macrisc_pci_ops = /* * Verify that a specific (bus, dev_fn) exists on chaos */ -static int -chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) +static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) { struct device_node *np; u32 *vendor, *device; + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; np = pci_busdev_to_OF_node(bus, devfn); if (np == NULL) return PCIBIOS_DEVICE_NOT_FOUND; @@ -341,10 +342,10 @@ static int u3_ht_skip_device(struct pci_controller *hose, } #define U3_HT_CFA0(devfn, off) \ - ((((unsigned long)devfn) << 8) | offset) + ((((unsigned int)devfn) << 8) | offset) #define U3_HT_CFA1(bus, devfn, off) \ (U3_HT_CFA0(devfn, off) \ - + (((unsigned long)bus) << 16) \ + + (((unsigned int)bus) << 16) \ + 0x01000000UL) static unsigned long u3_ht_cfg_access(struct pci_controller* hose, @@ -370,7 +371,8 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -419,7 +421,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, hose = pci_bus_to_host(bus); if (hose == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - + if (offset >= 0x100) + return PCIBIOS_BAD_REGISTER_NUMBER; addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; @@ -459,6 +462,112 @@ static struct pci_ops u3_ht_pci_ops = u3_ht_read_config, u3_ht_write_config }; + +#define U4_PCIE_CFA0(devfn, off) \ + ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \ + | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + | (((unsigned int)(off)) & 0xfcU)) + +#define U4_PCIE_CFA1(bus, devfn, off) \ + ((((unsigned int)(bus)) << 16) \ + |(((unsigned int)(devfn)) << 8) \ + | ((((unsigned int)(off)) >> 8) << 28) \ + |(((unsigned int)(off)) & 0xfcU) \ + |1UL) + +static unsigned long u4_pcie_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, int offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + caddr = U4_PCIE_CFA0(dev_fn, offset); + } else + caddr = U4_PCIE_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x03; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u4_pcie_pci_ops = +{ + u4_pcie_read_config, + u4_pcie_write_config +}; + #endif /* CONFIG_PPC64 */ #ifdef CONFIG_PPC32 @@ -628,15 +737,36 @@ static void __init setup_u3_agp(struct pci_controller* hose) hose->ops = ¯isc_pci_ops; hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); - u3_agp = hose; } +static void __init setup_u4_pcie(struct pci_controller* hose) +{ + /* We currently only implement the "non-atomic" config space, to + * be optimised later. + */ + hose->ops = &u4_pcie_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + /* The bus contains a bridge from root -> device, we need to + * make it visible on bus 0 so that we pick the right type + * of config cycles. If we didn't, we would have to force all + * config cycles to be type 1. So we override the "bus-range" + * property here + */ + hose->first_busno = 0x00; + hose->last_busno = 0xff; + u4_pcie = hose; +} + static void __init setup_u3_ht(struct pci_controller* hose) { struct device_node *np = (struct device_node *)hose->arch_data; + struct pci_controller *other = NULL; int i, cur; + hose->ops = &u3_ht_pci_ops; /* We hard code the address because of the different size of @@ -670,11 +800,20 @@ static void __init setup_u3_ht(struct pci_controller* hose) u3_ht = hose; - if (u3_agp == NULL) { - DBG("U3 has no AGP, using full resource range\n"); + if (u3_agp != NULL) + other = u3_agp; + else if (u4_pcie != NULL) + other = u4_pcie; + + if (other == NULL) { + DBG("U3/4 has no AGP/PCIE, using full resource range\n"); return; } + /* Fixup bus range vs. PCIE */ + if (u4_pcie) + hose->last_busno = u4_pcie->first_busno - 1; + /* We "remove" the AGP resources from the resources allocated to HT, * that is we create "holes". However, that code does assumptions * that so far happen to be true (cross fingers...), typically that @@ -682,7 +821,7 @@ static void __init setup_u3_ht(struct pci_controller* hose) */ cur = 0; for (i=0; i<3; i++) { - struct resource *res = &u3_agp->mem_resources[i]; + struct resource *res = &other->mem_resources[i]; if (res->flags != IORESOURCE_MEM) continue; /* We don't care about "fine" resources */ @@ -777,9 +916,13 @@ static int __init add_bridge(struct device_node *dev) setup_u3_ht(hose); disp_name = "U3-HT"; primary = 1; + } else if (device_is_compatible(dev, "u4-pcie")) { + setup_u4_pcie(hose); + disp_name = "U4-PCIE"; + primary = 0; } - printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", - disp_name, hose->first_busno, hose->last_busno); + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:" + " %d->%d\n", disp_name, hose->first_busno, hose->last_busno); #endif /* CONFIG_PPC64 */ /* 32 bits only bridges */ @@ -900,6 +1043,8 @@ void __init pmac_pci_init(void) pci_setup_phb_io(u3_ht, 1); if (u3_agp) pci_setup_phb_io(u3_agp, 0); + if (u4_pcie) + pci_setup_phb_io(u4_pcie, 0); /* * On ppc64, fixup the IO resources on our host bridges as @@ -912,7 +1057,8 @@ void __init pmac_pci_init(void) /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We * assume there is no P2P bridge on the AGP bus, which should be a - * safe assumptions hopefully. + * safe assumptions for now. We should do something better in the + * future though */ if (u3_agp) { struct device_node *np = u3_agp->arch_data; @@ -920,7 +1066,6 @@ void __init pmac_pci_init(void) for (np = np->child; np; np = np->sibling) PCI_DN(np)->busno = 0xf0; } - /* pmac_check_ht_link(); */ /* Tell pci.c to not use the common resource allocation mechanism */ @@ -1127,7 +1272,8 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev) good: pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); if ((progif & 5) != 5) { - printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev)); + printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", + pci_name(dev)); (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5); if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) || (progif & 5) != 5) @@ -1153,7 +1299,8 @@ static void fixup_k2_sata(struct pci_dev* dev) for (i = 0; i < 6; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); } } else { pci_read_config_word(dev, PCI_COMMAND, &cmd); @@ -1162,7 +1309,8 @@ static void fixup_k2_sata(struct pci_dev* dev) for (i = 0; i < 5; i++) { dev->resource[i].start = dev->resource[i].end = 0; dev->resource[i].flags = 0; - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, + 0); } } } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index dbb524a851aa..18bf3011d1e3 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -524,18 +524,56 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) #endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ } +static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, + int master) +{ + unsigned char senses[128]; + int offset = master ? 0 : 128; + int count = master ? 128 : 124; + const char *name = master ? " MPIC 1 " : " MPIC 2 "; + struct resource r; + struct mpic *mpic; + unsigned int flags = master ? MPIC_PRIMARY : 0; + int rc; + + rc = of_address_to_resource(np, 0, &r); + if (rc) + return NULL; + + pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); + + prom_get_irq_senses(senses, offset, offset + count); + + flags |= MPIC_WANTS_RESET; + if (get_property(np, "big-endian", NULL)) + flags |= MPIC_BIG_ENDIAN; + + /* Primary Big Endian means HT interrupts. This is quite dodgy + * but works until I find a better way + */ + if (master && (flags & MPIC_BIG_ENDIAN)) + flags |= MPIC_BROKEN_U3; + + mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0, + senses, count, name); + if (mpic == NULL) + return NULL; + + mpic_init(mpic); + + return mpic; + } + static int __init pmac_pic_probe_mpic(void) { struct mpic *mpic1, *mpic2; struct device_node *np, *master = NULL, *slave = NULL; - unsigned char senses[128]; - struct resource r; /* We can have up to 2 MPICs cascaded */ for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) != NULL;) { if (master == NULL && - get_property(np, "interrupt-parent", NULL) != NULL) + get_property(np, "interrupts", NULL) == NULL) master = of_node_get(np); else if (slave == NULL) slave = of_node_get(np); @@ -557,13 +595,8 @@ static int __init pmac_pic_probe_mpic(void) ppc_md.get_irq = mpic_get_irq; /* Setup master */ - BUG_ON(of_address_to_resource(master, 0, &r)); - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, master, 0, 0); - prom_get_irq_senses(senses, 0, 128); - mpic1 = mpic_alloc(r.start, MPIC_PRIMARY | MPIC_WANTS_RESET, - 0, 0, 128, 252, senses, 128, " OpenPIC "); + mpic1 = pmac_setup_one_mpic(master, 1); BUG_ON(mpic1 == NULL); - mpic_init(mpic1); /* Install NMI if any */ pmac_pic_setup_mpic_nmi(mpic1); @@ -574,27 +607,12 @@ static int __init pmac_pic_probe_mpic(void) if (slave == NULL || slave->n_intrs < 1) return 0; - /* Setup slave, failures are non-fatal */ - if (of_address_to_resource(slave, 0, &r)) { - printk(KERN_ERR "Can't get address of MPIC %s\n", - slave->full_name); - return 0; - } - pmac_call_feature(PMAC_FTR_ENABLE_MPIC, slave, 0, 0); - prom_get_irq_senses(senses, 128, 128 + 124); - - /* We don't need to set MPIC_BROKEN_U3 here since we don't have - * hypertransport interrupts routed to it, at least not on currently - * supported machines, that may change. - */ - mpic2 = mpic_alloc(r.start, MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, - 0, 128, 124, 0, senses, 124, " U3-MPIC "); + mpic2 = pmac_setup_one_mpic(slave, 0); if (mpic2 == NULL) { - printk(KERN_ERR "Can't create slave MPIC %s\n", - slave->full_name); + printk(KERN_ERR "Failed to setup slave MPIC\n"); + of_node_put(slave); return 0; } - mpic_init(mpic2); mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2); of_node_put(slave); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 18c5620f87fa..1daa5a06e9ea 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -345,7 +345,7 @@ void __init pmac_setup_arch(void) #ifdef CONFIG_SMP /* Check for Core99 */ - if (find_devices("uni-n") || find_devices("u3")) + if (find_devices("uni-n") || find_devices("u3") || find_devices("u4")) smp_ops = &core99_smp_ops; #ifdef CONFIG_PPC32 else @@ -635,7 +635,7 @@ static void __init pmac_init_early(void) /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_u3(); + iommu_init_early_dart(); #endif } @@ -711,7 +711,7 @@ static int __init pmac_probe(int platform) * occupies having to be broken up so the DART itself is not * part of the cacheable linar mapping */ - alloc_u3_dart_table(); + alloc_dart_table(); #endif #ifdef CONFIG_PMAC_SMU @@ -733,10 +733,11 @@ static int pmac_pci_probe_mode(struct pci_bus *bus) struct device_node *node = bus->sysdata; /* We need to use normal PCI probing for the AGP bus, - since the device for the AGP bridge isn't in the tree. */ - if (bus->self == NULL && device_is_compatible(node, "u3-agp")) + * since the device for the AGP bridge isn't in the tree. + */ + if (bus->self == NULL && (device_is_compatible(node, "u3-agp") || + device_is_compatible(node, "u4-pcie"))) return PCI_PROBE_NORMAL; - return PCI_PROBE_DEVTREE; } #endif diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 862f1e985c19..df01bb8feb16 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -361,7 +361,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr) set_dec(tb_ticks_per_jiffy); /* XXX fixme */ set_tb(0, 0); - last_jiffy_stamp(cpu_nr) = 0; if (cpu_nr > 0) { mb(); @@ -429,15 +428,62 @@ struct smp_ops_t psurge_smp_ops = { }; #endif /* CONFIG_PPC32 - actually powersurge support */ +/* + * Core 99 and later support + */ + +static void (*pmac_tb_freeze)(int freeze); +static unsigned long timebase; +static int tb_req; + +static void smp_core99_give_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + while(!tb_req) + barrier(); + tb_req = 0; + (*pmac_tb_freeze)(1); + mb(); + timebase = get_tb(); + mb(); + while (timebase) + barrier(); + mb(); + (*pmac_tb_freeze)(0); + mb(); + + local_irq_restore(flags); +} + + +static void __devinit smp_core99_take_timebase(void) +{ + unsigned long flags; + + local_irq_save(flags); + + tb_req = 1; + mb(); + while (!timebase) + barrier(); + mb(); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + mb(); + set_dec(tb_ticks_per_jiffy/2); + + local_irq_restore(flags); +} + #ifdef CONFIG_PPC64 /* * G5s enable/disable the timebase via an i2c-connected clock chip. */ static struct device_node *pmac_tb_clock_chip_host; static u8 pmac_tb_pulsar_addr; -static void (*pmac_tb_freeze)(int freeze); -static DEFINE_SPINLOCK(timebase_lock); -static unsigned long timebase; static void smp_core99_cypress_tb_freeze(int freeze) { @@ -447,7 +493,8 @@ static void smp_core99_cypress_tb_freeze(int freeze) /* Strangely, the device-tree says address is 0xd2, but darwin * accesses 0xd0 ... */ - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, + pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, 0xd0 | pmac_low_i2c_read, 0x81, &data, 1); @@ -475,7 +522,8 @@ static void smp_core99_pulsar_tb_freeze(int freeze) u8 data; int rc; - pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined); + pmac_low_i2c_setmode(pmac_tb_clock_chip_host, + pmac_low_i2c_mode_combined); rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host, pmac_tb_pulsar_addr | pmac_low_i2c_read, 0x2e, &data, 1); @@ -496,54 +544,14 @@ static void smp_core99_pulsar_tb_freeze(int freeze) } } - -static void smp_core99_give_timebase(void) -{ - /* Open i2c bus for synchronous access */ - if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0)) - panic("Can't open i2c for TB sync !\n"); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(1); - mb(); - timebase = get_tb(); - spin_unlock(&timebase_lock); - - while (timebase) - barrier(); - - spin_lock(&timebase_lock); - (*pmac_tb_freeze)(0); - spin_unlock(&timebase_lock); - - /* Close i2c bus */ - pmac_low_i2c_close(pmac_tb_clock_chip_host); -} - - -static void __devinit smp_core99_take_timebase(void) -{ - while (!timebase) - barrier(); - spin_lock(&timebase_lock); - set_tb(timebase >> 32, timebase & 0xffffffff); - timebase = 0; - spin_unlock(&timebase_lock); -} - -static void __init smp_core99_setup(int ncpus) +static void __init smp_core99_setup_i2c_hwsync(int ncpus) { struct device_node *cc = NULL; struct device_node *p; + const char *name = NULL; u32 *reg; int ok; - /* HW sync only on these platforms */ - if (!machine_is_compatible("PowerMac7,2") && - !machine_is_compatible("PowerMac7,3") && - !machine_is_compatible("RackMac3,1")) - return; - /* Look for the clock chip */ while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) { p = of_get_parent(cc); @@ -561,114 +569,64 @@ static void __init smp_core99_setup(int ncpus) if (device_is_compatible(cc, "pulsar-legacy-slewing")) { pmac_tb_freeze = smp_core99_pulsar_tb_freeze; pmac_tb_pulsar_addr = 0xd2; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + name = "Pulsar"; } else if (device_is_compatible(cc, "cy28508")) { pmac_tb_freeze = smp_core99_cypress_tb_freeze; - printk(KERN_INFO "Timebase clock is Cypress chip\n"); + name = "Cypress"; } break; case 0xd4: pmac_tb_freeze = smp_core99_pulsar_tb_freeze; pmac_tb_pulsar_addr = 0xd4; - printk(KERN_INFO "Timebase clock is Pulsar chip\n"); + name = "Pulsar"; break; } - if (pmac_tb_freeze != NULL) { - pmac_tb_clock_chip_host = of_get_parent(cc); - of_node_put(cc); + if (pmac_tb_freeze != NULL) break; + } + if (pmac_tb_freeze != NULL) { + struct device_node *p = of_get_parent(cc); + of_node_put(cc); + while(p && strcmp(p->type, "i2c")) { + cc = of_get_parent(p); + of_node_put(p); + p = cc; } + if (p == NULL) + goto no_i2c_sync; + /* Open i2c bus for synchronous access */ + if (pmac_low_i2c_open(p, 0)) { + printk(KERN_ERR "Failed top open i2c bus %s for clock" + " sync, fallback to software sync !\n", + p->full_name); + of_node_put(p); + goto no_i2c_sync; + } + pmac_tb_clock_chip_host = p; + printk(KERN_INFO "Processor timebase sync using %s i2c clock\n", + name); + return; } - if (pmac_tb_freeze == NULL) { - smp_ops->give_timebase = smp_generic_give_timebase; - smp_ops->take_timebase = smp_generic_take_timebase; - } + no_i2c_sync: + pmac_tb_freeze = NULL; } -/* nothing to do here, caches are already set up by service processor */ -static inline void __devinit core99_init_caches(int cpu) -{ -} +#endif /* CONFIG_PPC64 */ -#else /* CONFIG_PPC64 */ /* - * SMP G4 powermacs use a GPIO to enable/disable the timebase. + * SMP G4 and newer G5 use a GPIO to enable/disable the timebase. */ static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */ -static unsigned int pri_tb_hi, pri_tb_lo; -static unsigned int pri_tb_stamp; - -/* not __init, called in sleep/wakeup code */ -void smp_core99_give_timebase(void) +static void smp_core99_gpio_tb_freeze(int freeze) { - unsigned long flags; - unsigned int t; - - /* wait for the secondary to be in take_timebase */ - for (t = 100000; t > 0 && !sec_tb_reset; --t) - udelay(10); - if (!sec_tb_reset) { - printk(KERN_WARNING "Timeout waiting sync on second CPU\n"); - return; - } - - /* freeze the timebase and read it */ - /* disable interrupts so the timebase is disabled for the - shortest possible time */ - local_irq_save(flags); - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + if (freeze) + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4); + else + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - mb(); - pri_tb_hi = get_tbu(); - pri_tb_lo = get_tbl(); - pri_tb_stamp = last_jiffy_stamp(smp_processor_id()); - mb(); - - /* tell the secondary we're ready */ - sec_tb_reset = 2; - mb(); - - /* wait for the secondary to have taken it */ - /* note: can't use udelay here, since it needs the timebase running */ - for (t = 10000000; t > 0 && sec_tb_reset; --t) - barrier(); - if (sec_tb_reset) - /* XXX BUG_ON here? */ - printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); - - /* Now, restart the timebase by leaving the GPIO to an open collector */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0); - pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0); - local_irq_restore(flags); -} - -/* not __init, called in sleep/wakeup code */ -void smp_core99_take_timebase(void) -{ - unsigned long flags; - - /* tell the primary we're here */ - sec_tb_reset = 1; - mb(); - - /* wait for the primary to set pri_tb_hi/lo */ - while (sec_tb_reset < 2) - mb(); - - /* set our stuff the same as the primary */ - local_irq_save(flags); - set_dec(1); - set_tb(pri_tb_hi, pri_tb_lo); - last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp; - mb(); - - /* tell the primary we're done */ - sec_tb_reset = 0; - mb(); - local_irq_restore(flags); } /* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */ @@ -677,6 +635,7 @@ volatile static long int core99_l3_cache; static void __devinit core99_init_caches(int cpu) { +#ifndef CONFIG_PPC64 if (!cpu_has_feature(CPU_FTR_L2CR)) return; @@ -702,30 +661,80 @@ static void __devinit core99_init_caches(int cpu) _set_L3CR(core99_l3_cache); printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache); } +#endif /* !CONFIG_PPC64 */ } static void __init smp_core99_setup(int ncpus) { - struct device_node *cpu; - u32 *tbprop = NULL; - int i; +#ifdef CONFIG_PPC64 - core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ - cpu = of_find_node_by_type(NULL, "cpu"); - if (cpu != NULL) { - tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL); - if (tbprop) - core99_tb_gpio = *tbprop; - of_node_put(cpu); + /* i2c based HW sync on some G5s */ + if (machine_is_compatible("PowerMac7,2") || + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) + smp_core99_setup_i2c_hwsync(ncpus); + + /* GPIO based HW sync on recent G5s */ + if (pmac_tb_freeze == NULL) { + struct device_node *np = + of_find_node_by_name(NULL, "timebase-enable"); + u32 *reg = (u32 *)get_property(np, "reg", NULL); + + if (np && reg && !strcmp(np->type, "gpio")) { + core99_tb_gpio = *reg; + if (core99_tb_gpio < 0x50) + core99_tb_gpio += 0x50; + pmac_tb_freeze = smp_core99_gpio_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " GPIO 0x%02x\n", core99_tb_gpio); + } } - /* XXX should get this from reg properties */ - for (i = 1; i < ncpus; ++i) - smp_hw_index[i] = i; - powersave_nap = 0; -} +#else /* CONFIG_PPC64 */ + + /* GPIO based HW sync on ppc32 Core99 */ + if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) { + struct device_node *cpu; + u32 *tbprop = NULL; + + core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != NULL) { + tbprop = (u32 *)get_property(cpu, "timebase-enable", + NULL); + if (tbprop) + core99_tb_gpio = *tbprop; + of_node_put(cpu); + } + pmac_tb_freeze = smp_core99_gpio_tb_freeze; + printk(KERN_INFO "Processor timebase sync using" + " GPIO 0x%02x\n", core99_tb_gpio); + } + +#endif /* CONFIG_PPC64 */ + + /* No timebase sync, fallback to software */ + if (pmac_tb_freeze == NULL) { + smp_ops->give_timebase = smp_generic_give_timebase; + smp_ops->take_timebase = smp_generic_take_timebase; + printk(KERN_INFO "Processor timebase sync using software\n"); + } + +#ifndef CONFIG_PPC64 + { + int i; + + /* XXX should get this from reg properties */ + for (i = 1; i < ncpus; ++i) + smp_hw_index[i] = i; + } #endif + /* 32 bits SMP can't NAP */ + if (!machine_is_compatible("MacRISC4")) + powersave_nap = 0; +} + static int __init smp_core99_probe(void) { struct device_node *cpus; @@ -803,17 +812,25 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr) mpic_setup_this_cpu(); if (cpu_nr == 0) { -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 extern void g5_phy_disable_cpu1(void); + /* Close i2c bus if it was used for tb sync */ + if (pmac_tb_clock_chip_host) { + pmac_low_i2c_close(pmac_tb_clock_chip_host); + pmac_tb_clock_chip_host = NULL; + } + /* If we didn't start the second CPU, we must take * it off the bus */ if (machine_is_compatible("MacRISC4") && num_online_cpus() < 2) g5_phy_disable_cpu1(); -#endif /* CONFIG_POWER4 */ - if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349); +#endif /* CONFIG_PPC64 */ + + if (ppc_md.progress) + ppc_md.progress("core99_setup_cpu 0 done", 0x349); } } diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index b3e3636a57b0..14b9abde2d27 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -4,6 +4,6 @@ obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o -obj-$(CONFIG_U3_DART) += u3_iommu.o +obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_83xx) += ipic.o diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h index 33ed9ed7fc1e..c2d05763ccbe 100644 --- a/arch/powerpc/sysdev/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -20,29 +20,44 @@ #define _POWERPC_SYSDEV_DART_H -/* physical base of DART registers */ -#define DART_BASE 0xf8033000UL - /* Offset from base to control register */ -#define DARTCNTL 0 -/* Offset from base to exception register */ -#define DARTEXCP 0x10 -/* Offset from base to TLB tag registers */ -#define DARTTAG 0x1000 +#define DART_CNTL 0 +/* Offset from base to exception register */ +#define DART_EXCP_U3 0x10 +/* Offset from base to TLB tag registers */ +#define DART_TAGS_U3 0x1000 + +/* U4 registers */ +#define DART_BASE_U4 0x10 +#define DART_SIZE_U4 0x20 +#define DART_EXCP_U4 0x30 +#define DART_TAGS_U4 0x1000 /* Control Register fields */ -/* base address of table (pfn) */ -#define DARTCNTL_BASE_MASK 0xfffff -#define DARTCNTL_BASE_SHIFT 12 +/* U3 registers */ +#define DART_CNTL_U3_BASE_MASK 0xfffff +#define DART_CNTL_U3_BASE_SHIFT 12 +#define DART_CNTL_U3_FLUSHTLB 0x400 +#define DART_CNTL_U3_ENABLE 0x200 +#define DART_CNTL_U3_SIZE_MASK 0x1ff +#define DART_CNTL_U3_SIZE_SHIFT 0 + +/* U4 registers */ +#define DART_BASE_U4_BASE_MASK 0xffffff +#define DART_BASE_U4_BASE_SHIFT 0 +#define DART_CNTL_U4_FLUSHTLB 0x20000000 +#define DART_CNTL_U4_ENABLE 0x80000000 +#define DART_SIZE_U4_SIZE_MASK 0x1fff +#define DART_SIZE_U4_SIZE_SHIFT 0 + +#define DART_REG(r) (dart + ((r) >> 2)) +#define DART_IN(r) (in_be32(DART_REG(r))) +#define DART_OUT(r,v) (out_be32(DART_REG(r), (v))) -#define DARTCNTL_FLUSHTLB 0x400 -#define DARTCNTL_ENABLE 0x200 /* size of table in pages */ -#define DARTCNTL_SIZE_MASK 0x1ff -#define DARTCNTL_SIZE_SHIFT 0 /* DART table fields */ diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/dart_iommu.c similarity index 65% rename from arch/powerpc/sysdev/u3_iommu.c rename to arch/powerpc/sysdev/dart_iommu.c index 5c1a26a6d00c..df0dbdee762a 100644 --- a/arch/powerpc/sysdev/u3_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -1,25 +1,27 @@ /* - * arch/powerpc/sysdev/u3_iommu.c + * arch/powerpc/sysdev/dart_iommu.c * * Copyright (C) 2004 Olof Johansson , IBM Corporation + * Copyright (C) 2005 Benjamin Herrenschmidt , + * IBM Corporation * * Based on pSeries_iommu.c: * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * Copyright (C) 2004 Olof Johansson , IBM Corporation * - * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu. + * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu. + * * - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -57,21 +59,22 @@ static unsigned long dart_tablesize; static u32 *dart_vbase; /* Mapped base address for the dart */ -static unsigned int *dart; +static unsigned int *__iomem dart; /* Dummy val that entries are set to when unused */ static unsigned int dart_emptyval; -static struct iommu_table iommu_table_u3; -static int iommu_table_u3_inited; +static struct iommu_table iommu_table_dart; +static int iommu_table_dart_inited; static int dart_dirty; +static int dart_is_u4; #define DBG(...) static inline void dart_tlb_invalidate_all(void) { unsigned long l = 0; - unsigned int reg; + unsigned int reg, inv_bit; unsigned long limit; DBG("dart: flush\n"); @@ -81,29 +84,28 @@ static inline void dart_tlb_invalidate_all(void) * * Gotcha: Sometimes, the DART won't detect that the bit gets * set. If so, clear it and set it again. - */ + */ limit = 0; + inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB; retry: - reg = in_be32((unsigned int *)dart+DARTCNTL); - reg |= DARTCNTL_FLUSHTLB; - out_be32((unsigned int *)dart+DARTCNTL, reg); - l = 0; - while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) && - l < (1L<it_base) + index; - + /* On U3, all memory is contigous, so we can move this * out of the loop. */ @@ -148,7 +150,7 @@ static void dart_build(struct iommu_table *tbl, long index, static void dart_free(struct iommu_table *tbl, long index, long npages) { unsigned int *dp; - + /* We don't worry about flushing the TLB cache. The only drawback of * not doing it is that we won't catch buggy device drivers doing * bad DMAs, but then no 32-bit architecture ever does either. @@ -160,7 +162,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) npages <<= DART_PAGE_FACTOR; dp = ((unsigned int *)tbl->it_base) + index; - + while (npages--) *(dp++) = dart_emptyval; } @@ -168,20 +170,25 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) static int dart_init(struct device_node *dart_node) { - unsigned int regword; unsigned int i; - unsigned long tmp; + unsigned long tmp, base, size; + struct resource r; if (dart_tablebase == 0 || dart_tablesize == 0) { - printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n"); + printk(KERN_INFO "DART: table not allocated, using " + "direct DMA\n"); return -ENODEV; } + if (of_address_to_resource(dart_node, 0, &r)) + panic("DART: can't get register base ! "); + /* Make sure nothing from the DART range remains in the CPU cache * from a previous mapping that existed before the kernel took * over */ - flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize); + flush_dcache_phys_range(dart_tablebase, + dart_tablebase + dart_tablesize); /* Allocate a spare page to map all invalid DART pages. We need to do * that to work around what looks like a problem with the HT bridge @@ -189,21 +196,16 @@ static int dart_init(struct device_node *dart_node) */ tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE); if (!tmp) - panic("U3-DART: Cannot allocate spare page!"); - dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK); + panic("DART: Cannot allocate spare page!"); + dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & + DARTMAP_RPNMASK); - /* Map in DART registers. FIXME: Use device node to get base address */ - dart = ioremap(DART_BASE, 0x7000); + /* Map in DART registers */ + dart = ioremap(r.start, r.end - r.start + 1); if (dart == NULL) - panic("U3-DART: Cannot map registers!"); + panic("DART: Cannot map registers!"); - /* Set initial control register contents: table base, - * table size and enable bit - */ - regword = DARTCNTL_ENABLE | - ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) | - (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK) - << DARTCNTL_SIZE_SHIFT); + /* Map in DART table */ dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize); /* Fill initial table */ @@ -211,36 +213,50 @@ static int dart_init(struct device_node *dart_node) dart_vbase[i] = dart_emptyval; /* Initialize DART with table base and enable it. */ - out_be32((unsigned int *)dart, regword); + base = dart_tablebase >> DART_PAGE_SHIFT; + size = dart_tablesize >> DART_PAGE_SHIFT; + if (dart_is_u4) { + BUG_ON(size & ~DART_SIZE_U4_SIZE_MASK); + DART_OUT(DART_BASE_U4, base); + DART_OUT(DART_SIZE_U4, size); + DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE); + } else { + BUG_ON(size & ~DART_CNTL_U3_SIZE_MASK); + DART_OUT(DART_CNTL, + DART_CNTL_U3_ENABLE | + (base << DART_CNTL_U3_BASE_SHIFT) | + (size << DART_CNTL_U3_SIZE_SHIFT)); + } /* Invalidate DART to get rid of possible stale TLBs */ dart_tlb_invalidate_all(); - printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n"); + printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n", + dart_is_u4 ? "U4" : "U3"); return 0; } -static void iommu_table_u3_setup(void) +static void iommu_table_dart_setup(void) { - iommu_table_u3.it_busno = 0; - iommu_table_u3.it_offset = 0; + iommu_table_dart.it_busno = 0; + iommu_table_dart.it_offset = 0; /* it_size is in number of entries */ - iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; + iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; /* Initialize the common IOMMU code */ - iommu_table_u3.it_base = (unsigned long)dart_vbase; - iommu_table_u3.it_index = 0; - iommu_table_u3.it_blocksize = 1; - iommu_init_table(&iommu_table_u3); + iommu_table_dart.it_base = (unsigned long)dart_vbase; + iommu_table_dart.it_index = 0; + iommu_table_dart.it_blocksize = 1; + iommu_init_table(&iommu_table_dart); /* Reserve the last page of the DART to avoid possible prefetch * past the DART mapped area */ - set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map); + set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map); } -static void iommu_dev_setup_u3(struct pci_dev *dev) +static void iommu_dev_setup_dart(struct pci_dev *dev) { struct device_node *dn; @@ -254,35 +270,39 @@ static void iommu_dev_setup_u3(struct pci_dev *dev) dn = pci_device_to_OF_node(dev); if (dn) - PCI_DN(dn)->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_dart; } -static void iommu_bus_setup_u3(struct pci_bus *bus) +static void iommu_bus_setup_dart(struct pci_bus *bus) { struct device_node *dn; - if (!iommu_table_u3_inited) { - iommu_table_u3_inited = 1; - iommu_table_u3_setup(); + if (!iommu_table_dart_inited) { + iommu_table_dart_inited = 1; + iommu_table_dart_setup(); } dn = pci_bus_to_OF_node(bus); if (dn) - PCI_DN(dn)->iommu_table = &iommu_table_u3; + PCI_DN(dn)->iommu_table = &iommu_table_dart; } static void iommu_dev_setup_null(struct pci_dev *dev) { } static void iommu_bus_setup_null(struct pci_bus *bus) { } -void iommu_init_early_u3(void) +void iommu_init_early_dart(void) { struct device_node *dn; /* Find the DART in the device-tree */ dn = of_find_compatible_node(NULL, "dart", "u3-dart"); - if (dn == NULL) - return; + if (dn == NULL) { + dn = of_find_compatible_node(NULL, "dart", "u4-dart"); + if (dn == NULL) + goto bail; + dart_is_u4 = 1; + } /* Setup low level TCE operations for the core IOMMU code */ ppc_md.tce_build = dart_build; @@ -290,24 +310,27 @@ void iommu_init_early_u3(void) ppc_md.tce_flush = dart_flush; /* Initialize the DART HW */ - if (dart_init(dn)) { - /* If init failed, use direct iommu and null setup functions */ - ppc_md.iommu_dev_setup = iommu_dev_setup_null; - ppc_md.iommu_bus_setup = iommu_bus_setup_null; - - /* Setup pci_dma ops */ - pci_direct_iommu_init(); - } else { - ppc_md.iommu_dev_setup = iommu_dev_setup_u3; - ppc_md.iommu_bus_setup = iommu_bus_setup_u3; + if (dart_init(dn) == 0) { + ppc_md.iommu_dev_setup = iommu_dev_setup_dart; + ppc_md.iommu_bus_setup = iommu_bus_setup_dart; /* Setup pci_dma ops */ pci_iommu_init(); + + return; } + + bail: + /* If init failed, use direct iommu and null setup functions */ + ppc_md.iommu_dev_setup = iommu_dev_setup_null; + ppc_md.iommu_bus_setup = iommu_bus_setup_null; + + /* Setup pci_dma ops */ + pci_direct_iommu_init(); } -void __init alloc_u3_dart_table(void) +void __init alloc_dart_table(void) { /* Only reserve DART space if machine has more than 2GB of RAM * or if requested with iommu=on on cmdline. @@ -323,5 +346,5 @@ void __init alloc_u3_dart_table(void) dart_tablebase = (unsigned long) abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L)); - printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase); + printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase); } diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 9513ea78e6c1..4f26304d0263 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -13,6 +13,9 @@ */ #undef DEBUG +#undef DEBUG_IPI +#undef DEBUG_IRQ +#undef DEBUG_LOW #include #include @@ -168,35 +171,86 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic) /* Test if an interrupt is sourced from HyperTransport (used on broken U3s) * to force the edge setting on the MPIC and do the ack workaround. */ -static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source_no) +static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) { - if (source_no >= 128 || !mpic->fixups) + if (source >= 128 || !mpic->fixups) return 0; - return mpic->fixups[source_no].base != NULL; + return mpic->fixups[source].base != NULL; } -static inline void mpic_apic_end_irq(struct mpic *mpic, unsigned int source_no) +static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source) { - struct mpic_irq_fixup *fixup = &mpic->fixups[source_no]; + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; - spin_lock(&mpic->fixup_lock); - writeb(0x11 + 2 * fixup->irq, fixup->base + 2); - writel(fixup->data, fixup->base + 4); - spin_unlock(&mpic->fixup_lock); + if (fixup->applebase) { + unsigned int soff = (fixup->index >> 3) & ~3; + unsigned int mask = 1U << (fixup->index & 0x1f); + writel(mask, fixup->applebase + soff); + } else { + spin_lock(&mpic->fixup_lock); + writeb(0x11 + 2 * fixup->index, fixup->base + 2); + writel(fixup->data, fixup->base + 4); + spin_unlock(&mpic->fixup_lock); + } } +static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, + unsigned int irqflags) +{ + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; + unsigned long flags; + u32 tmp; -static void __init mpic_scan_ioapic(struct mpic *mpic, u8 __iomem *devbase) + if (fixup->base == NULL) + return; + + DBG("startup_ht_interrupt(%u, %u) index: %d\n", + source, irqflags, fixup->index); + spin_lock_irqsave(&mpic->fixup_lock, flags); + /* Enable and configure */ + writeb(0x10 + 2 * fixup->index, fixup->base + 2); + tmp = readl(fixup->base + 4); + tmp &= ~(0x23U); + if (irqflags & IRQ_LEVEL) + tmp |= 0x22; + writel(tmp, fixup->base + 4); + spin_unlock_irqrestore(&mpic->fixup_lock, flags); +} + +static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, + unsigned int irqflags) +{ + struct mpic_irq_fixup *fixup = &mpic->fixups[source]; + unsigned long flags; + u32 tmp; + + if (fixup->base == NULL) + return; + + DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags); + + /* Disable */ + spin_lock_irqsave(&mpic->fixup_lock, flags); + writeb(0x10 + 2 * fixup->index, fixup->base + 2); + tmp = readl(fixup->base + 4); + tmp &= ~1U; + writel(tmp, fixup->base + 4); + spin_unlock_irqrestore(&mpic->fixup_lock, flags); +} + +static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase, + unsigned int devfn, u32 vdid) { int i, irq, n; + u8 __iomem *base; u32 tmp; u8 pos; - for (pos = readb(devbase + 0x34); pos; pos = readb(devbase + pos + 1)) { - u8 id = readb(devbase + pos); - - if (id == 0x08) { + for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0; + pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) { + u8 id = readb(devbase + pos + PCI_CAP_LIST_ID); + if (id == PCI_CAP_ID_HT_IRQCONF) { id = readb(devbase + pos + 3); if (id == 0x80) break; @@ -205,33 +259,41 @@ static void __init mpic_scan_ioapic(struct mpic *mpic, u8 __iomem *devbase) if (pos == 0) return; - printk(KERN_INFO "mpic: - Workarounds @ %p, pos = 0x%02x\n", devbase, pos); + base = devbase + pos; + writeb(0x01, base + 2); + n = (readl(base + 4) >> 16) & 0xff; - devbase += pos; - - writeb(0x01, devbase + 2); - n = (readl(devbase + 4) >> 16) & 0xff; + printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x" + " has %d irqs\n", + devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1); for (i = 0; i <= n; i++) { - writeb(0x10 + 2 * i, devbase + 2); - tmp = readl(devbase + 4); - if ((tmp & 0x21) != 0x20) - continue; + writeb(0x10 + 2 * i, base + 2); + tmp = readl(base + 4); irq = (tmp >> 16) & 0xff; - mpic->fixups[irq].irq = i; - mpic->fixups[irq].base = devbase; - writeb(0x11 + 2 * i, devbase + 2); - mpic->fixups[irq].data = readl(devbase + 4) | 0x80000000; + DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp); + /* mask it , will be unmasked later */ + tmp |= 0x1; + writel(tmp, base + 4); + mpic->fixups[irq].index = i; + mpic->fixups[irq].base = base; + /* Apple HT PIC has a non-standard way of doing EOIs */ + if ((vdid & 0xffff) == 0x106b) + mpic->fixups[irq].applebase = devbase + 0x60; + else + mpic->fixups[irq].applebase = NULL; + writeb(0x11 + 2 * i, base + 2); + mpic->fixups[irq].data = readl(base + 4) | 0x80000000; } } -static void __init mpic_scan_ioapics(struct mpic *mpic) +static void __init mpic_scan_ht_pics(struct mpic *mpic) { unsigned int devfn; u8 __iomem *cfgspace; - printk(KERN_INFO "mpic: Setting up IO-APICs workarounds for U3\n"); + printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n"); /* Allocate fixups array */ mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup)); @@ -247,13 +309,14 @@ static void __init mpic_scan_ioapics(struct mpic *mpic) cfgspace = ioremap(0xf2000000, 0x10000); BUG_ON(cfgspace == NULL); - /* Now we scan all slots. We do a very quick scan, we read the header type, - * vendor ID and device ID only, that's plenty enough + /* Now we scan all slots. We do a very quick scan, we read the header + * type, vendor ID and device ID only, that's plenty enough */ for (devfn = 0; devfn < 0x100; devfn++) { u8 __iomem *devbase = cfgspace + (devfn << 8); u8 hdr_type = readb(devbase + PCI_HEADER_TYPE); u32 l = readl(devbase + PCI_VENDOR_ID); + u16 s; DBG("devfn %x, l: %x\n", devfn, l); @@ -261,8 +324,12 @@ static void __init mpic_scan_ioapics(struct mpic *mpic) if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000) goto next; + /* Check if is supports capability lists */ + s = readw(devbase + PCI_STATUS); + if (!(s & PCI_STATUS_CAP_LIST)) + goto next; - mpic_scan_ioapic(mpic, devbase); + mpic_scan_ht_pic(mpic, devbase, devfn, l); next: /* next device, if function 0 */ @@ -363,6 +430,31 @@ static void mpic_enable_irq(unsigned int irq) break; } } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); + +#ifdef CONFIG_MPIC_BROKEN_U3 + if (mpic->flags & MPIC_BROKEN_U3) { + unsigned int src = irq - mpic->irq_offset; + if (mpic_is_ht_interrupt(mpic, src) && + (irq_desc[irq].status & IRQ_LEVEL)) + mpic_ht_end_irq(mpic, src); + } +#endif /* CONFIG_MPIC_BROKEN_U3 */ +} + +static unsigned int mpic_startup_irq(unsigned int irq) +{ +#ifdef CONFIG_MPIC_BROKEN_U3 + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = irq - mpic->irq_offset; + + if (mpic_is_ht_interrupt(mpic, src)) + mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); + +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_enable_irq(irq); + + return 0; } static void mpic_disable_irq(unsigned int irq) @@ -386,12 +478,27 @@ static void mpic_disable_irq(unsigned int irq) } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); } +static void mpic_shutdown_irq(unsigned int irq) +{ +#ifdef CONFIG_MPIC_BROKEN_U3 + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = irq - mpic->irq_offset; + + if (mpic_is_ht_interrupt(mpic, src)) + mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); + +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + mpic_disable_irq(irq); +} + static void mpic_end_irq(unsigned int irq) { struct mpic *mpic = mpic_from_irq(irq); +#ifdef DEBUG_IRQ DBG("%s: end_irq: %d\n", mpic->name, irq); - +#endif /* We always EOI on end_irq() even for edge interrupts since that * should only lower the priority, the MPIC should have properly * latched another edge interrupt coming in anyway @@ -400,8 +507,9 @@ static void mpic_end_irq(unsigned int irq) #ifdef CONFIG_MPIC_BROKEN_U3 if (mpic->flags & MPIC_BROKEN_U3) { unsigned int src = irq - mpic->irq_offset; - if (mpic_is_ht_interrupt(mpic, src)) - mpic_apic_end_irq(mpic, src); + if (mpic_is_ht_interrupt(mpic, src) && + (irq_desc[irq].status & IRQ_LEVEL)) + mpic_ht_end_irq(mpic, src); } #endif /* CONFIG_MPIC_BROKEN_U3 */ @@ -482,6 +590,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, mpic->name = name; mpic->hc_irq.typename = name; + mpic->hc_irq.startup = mpic_startup_irq; + mpic->hc_irq.shutdown = mpic_shutdown_irq; mpic->hc_irq.enable = mpic_enable_irq; mpic->hc_irq.disable = mpic_disable_irq; mpic->hc_irq.end = mpic_end_irq; @@ -650,10 +760,10 @@ void __init mpic_init(struct mpic *mpic) mpic->irq_count = mpic->num_sources; #ifdef CONFIG_MPIC_BROKEN_U3 - /* Do the ioapic fixups on U3 broken mpic */ + /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) - mpic_scan_ioapics(mpic); + mpic_scan_ht_pics(mpic); #endif /* CONFIG_MPIC_BROKEN_U3 */ for (i = 0; i < mpic->num_sources; i++) { @@ -840,7 +950,9 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) BUG_ON(mpic == NULL); +#ifdef DEBUG_IPI DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); +#endif mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10, mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); @@ -851,19 +963,28 @@ int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) u32 irq; irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK; +#ifdef DEBUG_LOW DBG("%s: get_one_irq(): %d\n", mpic->name, irq); - +#endif if (mpic->cascade && irq == mpic->cascade_vec) { +#ifdef DEBUG_LOW DBG("%s: cascading ...\n", mpic->name); +#endif irq = mpic->cascade(regs, mpic->cascade_data); mpic_eoi(mpic); return irq; } if (unlikely(irq == MPIC_VEC_SPURRIOUS)) return -1; - if (irq < MPIC_VEC_IPI_0) + if (irq < MPIC_VEC_IPI_0) { +#ifdef DEBUG_IRQ + DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset); +#endif return irq + mpic->irq_offset; + } +#ifdef DEBUG_IPI DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0); +#endif return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset; } diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index a8d3bc0a9c5c..5013b1285e22 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1686,7 +1686,7 @@ pmac_ide_probe(void) #else macio_register_driver(&pmac_ide_macio_driver); pci_register_driver(&pmac_ide_pci_driver); -#endif +#endif } #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index e8378274d710..96226116a646 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -53,7 +53,7 @@ #undef DEBUG_SMU #ifdef DEBUG_SMU -#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0) +#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0) #else #define DPRINTK(fmt, args...) do { } while (0) #endif @@ -909,10 +909,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id) struct property *prop; /* First query the partition info */ + DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq); smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2, smu_done_complete, &comp, SMU_CMD_PARTITION_LATEST, id); wait_for_completion(&comp); + DPRINTK("SMU: done, status: %d, reply_len: %d\n", + cmd.cmd.status, cmd.cmd.reply_len); /* Partition doesn't exist (or other error) */ if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6) @@ -975,6 +978,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size, sprintf(pname, "sdb-partition-%02x", id); + DPRINTK("smu_get_sdb_partition(%02x)\n", id); + if (interruptible) { int rc; rc = down_interruptible(&smu_part_access); @@ -986,6 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size, part = (struct smu_sdbp_header *)get_property(smu->of_node, pname, size); if (part == NULL) { + DPRINTK("trying to extract from SMU ...\n"); part = smu_create_sdb_partition(id); if (part != NULL && size) *size = part->len << 2; diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index f89f06050893..59f062668997 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -56,7 +56,7 @@ struct device_node; /* Walks all buses and creates iommu tables */ extern void iommu_setup_pSeries(void); -extern void iommu_setup_u3(void); +extern void iommu_setup_dart(void); /* Frees table for an individual device node */ extern void iommu_free_table(struct device_node *dn); @@ -104,7 +104,7 @@ extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); -extern void iommu_init_early_u3(void); +extern void iommu_init_early_dart(void); #ifdef CONFIG_PCI extern void pci_iommu_init(void); @@ -113,6 +113,6 @@ extern void pci_direct_iommu_init(void); static inline void pci_iommu_init(void) { } #endif -extern void alloc_u3_dart_table(void); +extern void alloc_dart_table(void); #endif /* _ASM_IOMMU_H */ diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 6ce27e1b5646..bf7e71793205 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -117,8 +117,9 @@ typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data); struct mpic_irq_fixup { u8 __iomem *base; + u8 __iomem *applebase; u32 data; - unsigned int irq; + unsigned int index; }; #endif /* CONFIG_MPIC_BROKEN_U3 */ diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h index e9683bcff19b..f6997ed5179e 100644 --- a/include/asm-powerpc/pmac_feature.h +++ b/include/asm-powerpc/pmac_feature.h @@ -121,6 +121,7 @@ #define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */ #define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */ #define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */ +#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */ /* * Motherboard flags @@ -341,6 +342,7 @@ enum { macio_pangea, macio_intrepid, macio_keylargo2, + macio_shasta, }; struct macio_chip diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e2a089b051ed..d27a78b71297 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -196,6 +196,7 @@ #define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ #define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ #define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_HT_IRQCONF 0x08 /* HyperTransport IRQ Configuration */ #define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ #define PCI_CAP_ID_EXP 0x10 /* PCI Express */ #define PCI_CAP_ID_MSIX 0x11 /* MSI-X */