libata-sff: separate out BMDMA init

Separate out ata_pci_bmdma_prepare_host() and ata_pci_bmdma_init_one()
from their SFF counterparts.  SFF ones no longer try to initialize
BMDMA or set PCI master.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/ata_generic.c

@@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 			return rc;
 		pcim_pin_device(dev);
 	}
-	return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
 }
 
 static struct pci_device_id ata_generic[] = {

drivers/ata/ata_piix.c

@@ -1589,7 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		hpriv->map = piix_init_sata_map(pdev, port_info,
 					piix_map_db_table[ent->driver_data]);
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	host->private_data = hpriv;

drivers/ata/libata-sff.c

@@ -2315,13 +2315,13 @@ int ata_pci_sff_init_host(struct ata_host *host)
 EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
 
 /**
- *	ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ *	ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
  *
- *	Helper to allocate ATA host for @pdev, acquire all native PCI
- *	resources and initialize it accordingly in one go.
+ *	Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ *	all PCI resources and initialize it accordingly in one go.
  *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
@@ -2351,9 +2351,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
 	if (rc)
 		goto err_out;
 
-	/* init DMA related stuff */
-	ata_pci_bmdma_init(host);
-
 	devres_remove_group(&pdev->dev, NULL);
 	*r_host = host;
 	return 0;
@@ -2458,8 +2455,21 @@ out:
 }
 EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
 
+static const struct ata_port_info *ata_sff_find_valid_pi(
+					const struct ata_port_info * const *ppi)
+{
+	int i;
+
+	/* look up the first valid port_info */
+	for (i = 0; i < 2 && ppi[i]; i++)
+		if (ppi[i]->port_ops != &ata_dummy_port_ops)
+			return ppi[i];
+
+	return NULL;
+}
+
 /**
- *	ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ *	ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
  *	@sht: scsi_host_template to use when registering the host
@@ -2468,11 +2478,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
  *
  *	This is a helper function which can be called from a driver's
  *	xxx_init_one() probe function if the hardware uses traditional
- *	IDE taskfile registers.
- *
- *	This function calls pci_enable_device(), reserves its register
- *	regions, sets the dma mask, enables bus master mode, and calls
- *	ata_device_add()
+ *	IDE taskfile registers and is PIO only.
  *
  *	ASSUMPTION:
  *	Nobody makes a single channel controller that appears solely as
@@ -2489,20 +2495,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 		 struct scsi_host_template *sht, void *host_priv, int hflag)
 {
 	struct device *dev = &pdev->dev;
-	const struct ata_port_info *pi = NULL;
+	const struct ata_port_info *pi;
 	struct ata_host *host = NULL;
-	int i, rc;
+	int rc;
 
 	DPRINTK("ENTER\n");
 
-	/* look up the first valid port_info */
-	for (i = 0; i < 2 && ppi[i]; i++) {
-		if (ppi[i]->port_ops != &ata_dummy_port_ops) {
-			pi = ppi[i];
-			break;
-		}
-	}
-
+	pi = ata_sff_find_valid_pi(ppi);
 	if (!pi) {
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "no valid port_info specified\n");
@@ -2523,8 +2522,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 	host->private_data = host_priv;
 	host->flags |= hflag;
 
-	pci_set_master(pdev);
-	rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
 		devres_remove_group(&pdev->dev, NULL);
@@ -3196,6 +3194,98 @@ void ata_pci_bmdma_init(struct ata_host *host)
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
 
+/**
+ *	ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ *	@pdev: target PCI device
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@r_host: out argument for the initialized ATA host
+ *
+ *	Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ *	resources and initialize it accordingly in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+			       const struct ata_port_info * const * ppi,
+			       struct ata_host **r_host)
+{
+	int rc;
+
+	rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+	if (rc)
+		return rc;
+
+	ata_pci_bmdma_init(*r_host);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ *	ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ *	@pdev: Controller to be initialized
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@sht: scsi_host_template to use when registering the host
+ *	@host_priv: host private_data
+ *	@hflags: host flags
+ *
+ *	This function is similar to ata_pci_sff_init_one() but also
+ *	takes care of BMDMA initialization.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+			   const struct ata_port_info * const * ppi,
+			   struct scsi_host_template *sht, void *host_priv,
+			   int hflags)
+{
+	struct device *dev = &pdev->dev;
+	const struct ata_port_info *pi;
+	struct ata_host *host = NULL;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	pi = ata_sff_find_valid_pi(ppi);
+	if (!pi) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "no valid port_info specified\n");
+		return -EINVAL;
+	}
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		goto out;
+
+	/* prepare and activate BMDMA host */
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+	if (rc)
+		goto out;
+	host->private_data = host_priv;
+	host->flags |= hflags;
+
+	pci_set_master(pdev);
+	rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+	if (rc == 0)
+		devres_remove_group(&pdev->dev, NULL);
+	else
+		devres_release_group(&pdev->dev, NULL);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
 #endif /* CONFIG_PCI */
 
 /**

drivers/ata/pata_acpi.c

@@ -260,7 +260,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 			return rc;
 		pcim_pin_device(pdev);
 	}
-	return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
 }
 
 static const struct pci_device_id pacpi_pci_tbl[] = {

drivers/ata/pata_ali.c

@@ -583,7 +583,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	        	ppi[0] = &info_20_udma;
 	}
 
-	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+	if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
+		return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+	else
+		return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_amd.c

@@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* And fire it up */
-	return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_artop.c

@@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	BUG_ON(ppi[0] == NULL);
 
-	return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
 }
 
 static const struct pci_device_id artop_pci_tbl[] = {

drivers/ata/pata_atiixp.c

@@ -246,8 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
 			ppi[i] = &ata_dummy_port_info;
 
-	return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL,
-						ATA_HOST_PARALLEL_SCAN);
+	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
 }
 
 static const struct pci_device_id atiixp[] = {

drivers/ata/pata_cmd64x.c

@@ -367,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_cs5530.c

@@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_cs5535.c

@@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
 }
 
 static const struct pci_device_id cs5535[] = {

drivers/ata/pata_cs5536.c

@@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
 }
 
 static const struct pci_device_id cs5536[] = {

drivers/ata/pata_cypress.c

@@ -138,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 	if (PCI_FUNC(pdev->devfn) != 1)
 		return -ENODEV;
 
-	return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
 }
 
 static const struct pci_device_id cy82c693[] = {

drivers/ata/pata_efar.c

@@ -277,8 +277,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL,
-					ATA_HOST_PARALLEL_SCAN);
+	return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
 }
 
 static const struct pci_device_id efar_pci_tbl[] = {

drivers/ata/pata_hpt366.c

@@ -361,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 	}
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_hpt37x.c

@@ -987,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
 }
 
 static const struct pci_device_id hpt37x[] = {

drivers/ata/pata_hpt3x2n.c

@@ -548,7 +548,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
 }
 
 static const struct pci_device_id hpt3x2n[] = {

drivers/ata/pata_it8213.c

@@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {

drivers/ata/pata_it821x.c

@@ -933,7 +933,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		else
 			ppi[0] = &info_smart;
 	}
-	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_jmicron.c

@@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {

drivers/ata/pata_marvell.c

@@ -153,7 +153,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 		return -ENODEV;
 	}
 #endif
-	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0);
 }
 
 static const struct pci_device_id marvell_pci_tbl[] = {

drivers/ata/pata_netcell.c

@@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	ata_pci_bmdma_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {

drivers/ata/pata_ns87415.c

@@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
 	ns87415_fixup(pdev);
 
-	return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {

drivers/ata/pata_oldpiix.c

@@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
 }
 
 static const struct pci_device_id oldpiix_pci_tbl[] = {

drivers/ata/pata_optidma.c

@@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0);
 }
 
 static const struct pci_device_id optidma[] = {

drivers/ata/pata_pdc202xx_old.c

@@ -337,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 				return -ENODEV;
 		}
 	}
-	return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
 }
 
 static const struct pci_device_id pdc202xx[] = {

drivers/ata/pata_piccolo.c

@@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 	/* Just one port for the moment */
-	return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0);
 }
 
 static struct pci_device_id ata_tosh[] = {

drivers/ata/pata_radisys.c

@@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {

drivers/ata/pata_rdc.c

@@ -344,7 +344,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev,
 	 */
 	pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	host->private_data = hpriv;

drivers/ata/pata_sc1200.c

@@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
 }
 
 static const struct pci_device_id sc1200[] = {

drivers/ata/pata_sch.c

@@ -179,7 +179,7 @@ static int __devinit sch_init_one(struct pci_dev *pdev,
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
 }
 
 static int __init sch_init(void)

drivers/ata/pata_serverworks.c

@@ -460,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
 		ata_pci_bmdma_clear_simplex(pdev);
 
-	return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_sil680.c

@@ -378,7 +378,7 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 				 IRQF_SHARED, &sil680_sht);
 
 use_ioports:
-	return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_sis.c

@@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	sis_fixup(pdev, chipset);
 
-	return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_sl82c105.c

@@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
 
-	return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
 }
 
 static const struct pci_device_id sl82c105[] = {

drivers/ata/pata_triflex.c

@@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0);
 }
 
 static const struct pci_device_id triflex[] = {

drivers/ata/pata_via.c

@@ -627,7 +627,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* We have established the device type, now fire it up */
-	return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
 }
 
 #ifdef CONFIG_PM

drivers/ata/sata_nv.c

@@ -2430,7 +2430,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ppi[0] = &nv_port_info[type];
 	ipriv = ppi[0]->private_data;
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 

drivers/ata/sata_sis.c

@@ -279,7 +279,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 

drivers/ata/sata_via.c

@@ -463,7 +463,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;
@@ -520,7 +520,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int i, rc;
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;

include/linux/libata.h

@@ -1644,6 +1644,13 @@ extern int ata_bmdma_port_start32(struct ata_port *ap);
 #ifdef CONFIG_PCI
 extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
 extern void ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+				      const struct ata_port_info * const * ppi,
+				      struct ata_host **r_host);
+extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+				  const struct ata_port_info * const * ppi,
+				  struct scsi_host_template *sht,
+				  void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
 
 /**