dt-bindings: mailbox: Document Hi6220 mailbox driver

Document DT binding for Hisilicon Hi6220 mailbox driver.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This commit is contained in:
Leo Yan 2016-02-15 21:50:23 +08:00 коммит произвёл Jassi Brar
Родитель 2d74ffdc91
Коммит 1cb17866f0
1 изменённых файлов: 74 добавлений и 0 удалений

Просмотреть файл

@ -0,0 +1,74 @@
Hisilicon Hi6220 Mailbox Driver
===============================
Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel
is unidirectional with a maximum message size of 8 words. I/O is
performed using register access (there is no DMA) and the cell
raises an interrupt when messages are received.
Mailbox Device Node:
====================
Required properties:
--------------------
- compatible: Shall be "hisilicon,hi6220-mbox"
- reg: Contains the mailbox register address range (base
address and length); the first item is for IPC
registers, the second item is shared buffer for
slots.
- #mbox-cells: Common mailbox binding property to identify the number
of cells required for the mailbox specifier. Must be 3.
<&phandle slot_id dst_irq ack_irq>
phandle: Label name of mailbox controller
slot_id: Slot id used either for TX or RX
dst_irq: IRQ identifier index number which used by MCU
ack_irq: IRQ identifier index number with generating a
TX/RX interrupt to application processor,
mailbox driver uses it to acknowledge interrupt
- interrupts: Contains the interrupt information for the mailbox
device. The format is dependent on which interrupt
controller the SoCs use.
Optional Properties:
--------------------
- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver
use this flag to ask MCU to enable "automatic idle
flag" mode or IRQ generated mode to acknowledge a TX
completion.
Example:
--------
mailbox: mailbox@f7510000 {
compatible = "hisilicon,hi6220-mbox";
reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
<0x0 0x06dff800 0x0 0x0800>; /* Mailbox */
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <3>;
};
Mailbox client
===============
Required properties:
--------------------
- compatible: Many (See the client docs).
- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt)
Cells must match 'mbox-cells' (See Mailbox Device Node above).
Optional Properties:
--------------------
- mbox-names: Name given to channels seen in the 'mboxes' property.
Example:
--------
stub_clock: stub_clock {
compatible = "hisilicon,hi6220-stub-clk";
hisilicon,hi6220-clk-sram = <&sram>;
#clock-cells = <1>;
mbox-names = "mbox-tx", "mbox-rx";
mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>;
};