scripts/faddr2line: Fix overlapping text section failures
There have been some recent reports of faddr2line failures:
$ scripts/faddr2line sound/soundcore.ko sound_devnode+0x5/0x35
bad symbol size: base: 0x0000000000000000 end: 0x0000000000000000
$ ./scripts/faddr2line vmlinux.o enter_from_user_mode+0x24
bad symbol size: base: 0x0000000000005fe0 end: 0x0000000000005fe0
The problem is that faddr2line is based on 'nm', which has a major
limitation: it doesn't know how to distinguish between different text
sections. So if an offset exists in multiple text sections in the
object, it may fail.
Rewrite faddr2line to be section-aware, by basing it on readelf.
Fixes: 67326666e2 ("scripts: add script for translating stack dump function offsets")
Reported-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/29ff99f86e3da965b6e46c1cc2d72ce6528c17c3.1652382321.git.jpoimboe@kernel.org
This commit is contained in:
Josh Poimboeuf
Родитель
21e350233b
Коммит
1d1a0e7c51
|
|
@ -44,17 +44,6 @@
|
|||
set -o errexit
|
||||
set -o nounset
|
||||
|
||||
READELF="${CROSS_COMPILE:-}readelf"
|
||||
ADDR2LINE="${CROSS_COMPILE:-}addr2line"
|
||||
SIZE="${CROSS_COMPILE:-}size"
|
||||
NM="${CROSS_COMPILE:-}nm"
|
||||
|
||||
command -v awk >/dev/null 2>&1 || die "awk isn't installed"
|
||||
command -v ${READELF} >/dev/null 2>&1 || die "readelf isn't installed"
|
||||
command -v ${ADDR2LINE} >/dev/null 2>&1 || die "addr2line isn't installed"
|
||||
command -v ${SIZE} >/dev/null 2>&1 || die "size isn't installed"
|
||||
command -v ${NM} >/dev/null 2>&1 || die "nm isn't installed"
|
||||
|
||||
usage() {
|
||||
echo "usage: faddr2line [--list] <object file> <func+offset> <func+offset>..." >&2
|
||||
exit 1
|
||||
|
|
@ -69,6 +58,14 @@ die() {
|
|||
exit 1
|
||||
}
|
||||
|
||||
READELF="${CROSS_COMPILE:-}readelf"
|
||||
ADDR2LINE="${CROSS_COMPILE:-}addr2line"
|
||||
AWK="awk"
|
||||
|
||||
command -v ${AWK} >/dev/null 2>&1 || die "${AWK} isn't installed"
|
||||
command -v ${READELF} >/dev/null 2>&1 || die "${READELF} isn't installed"
|
||||
command -v ${ADDR2LINE} >/dev/null 2>&1 || die "${ADDR2LINE} isn't installed"
|
||||
|
||||
# Try to figure out the source directory prefix so we can remove it from the
|
||||
# addr2line output. HACK ALERT: This assumes that start_kernel() is in
|
||||
# init/main.c! This only works for vmlinux. Otherwise it falls back to
|
||||
|
|
@ -76,7 +73,7 @@ die() {
|
|||
find_dir_prefix() {
|
||||
local objfile=$1
|
||||
|
||||
local start_kernel_addr=$(${READELF} -sW $objfile | awk '$8 == "start_kernel" {printf "0x%s", $2}')
|
||||
local start_kernel_addr=$(${READELF} --symbols --wide $objfile | ${AWK} '$8 == "start_kernel" {printf "0x%s", $2}')
|
||||
[[ -z $start_kernel_addr ]] && return
|
||||
|
||||
local file_line=$(${ADDR2LINE} -e $objfile $start_kernel_addr)
|
||||
|
|
@ -97,86 +94,133 @@ __faddr2line() {
|
|||
local dir_prefix=$3
|
||||
local print_warnings=$4
|
||||
|
||||
local func=${func_addr%+*}
|
||||
local sym_name=${func_addr%+*}
|
||||
local offset=${func_addr#*+}
|
||||
offset=${offset%/*}
|
||||
local size=
|
||||
[[ $func_addr =~ "/" ]] && size=${func_addr#*/}
|
||||
local user_size=
|
||||
[[ $func_addr =~ "/" ]] && user_size=${func_addr#*/}
|
||||
|
||||
if [[ -z $func ]] || [[ -z $offset ]] || [[ $func = $func_addr ]]; then
|
||||
if [[ -z $sym_name ]] || [[ -z $offset ]] || [[ $sym_name = $func_addr ]]; then
|
||||
warn "bad func+offset $func_addr"
|
||||
DONE=1
|
||||
return
|
||||
fi
|
||||
|
||||
# Go through each of the object's symbols which match the func name.
|
||||
# In rare cases there might be duplicates.
|
||||
file_end=$(${SIZE} -Ax $objfile | awk '$1 == ".text" {print $2}')
|
||||
while read symbol; do
|
||||
local fields=($symbol)
|
||||
local sym_base=0x${fields[0]}
|
||||
local sym_type=${fields[1]}
|
||||
local sym_end=${fields[3]}
|
||||
# In rare cases there might be duplicates, in which case we print all
|
||||
# matches.
|
||||
while read line; do
|
||||
local fields=($line)
|
||||
local sym_addr=0x${fields[1]}
|
||||
local sym_elf_size=${fields[2]}
|
||||
local sym_sec=${fields[6]}
|
||||
|
||||
# calculate the size
|
||||
local sym_size=$(($sym_end - $sym_base))
|
||||
if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
|
||||
warn "bad symbol size: base: $sym_base end: $sym_end"
|
||||
# Get the section size:
|
||||
local sec_size=$(${READELF} --section-headers --wide $objfile |
|
||||
sed 's/\[ /\[/' |
|
||||
${AWK} -v sec=$sym_sec '$1 == "[" sec "]" { print "0x" $6; exit }')
|
||||
|
||||
if [[ -z $sec_size ]]; then
|
||||
warn "bad section size: section: $sym_sec"
|
||||
DONE=1
|
||||
return
|
||||
fi
|
||||
|
||||
# Calculate the symbol size.
|
||||
#
|
||||
# Unfortunately we can't use the ELF size, because kallsyms
|
||||
# also includes the padding bytes in its size calculation. For
|
||||
# kallsyms, the size calculation is the distance between the
|
||||
# symbol and the next symbol in a sorted list.
|
||||
local sym_size
|
||||
local cur_sym_addr
|
||||
local found=0
|
||||
while read line; do
|
||||
local fields=($line)
|
||||
cur_sym_addr=0x${fields[1]}
|
||||
local cur_sym_elf_size=${fields[2]}
|
||||
local cur_sym_name=${fields[7]:-}
|
||||
|
||||
if [[ $cur_sym_addr = $sym_addr ]] &&
|
||||
[[ $cur_sym_elf_size = $sym_elf_size ]] &&
|
||||
[[ $cur_sym_name = $sym_name ]]; then
|
||||
found=1
|
||||
continue
|
||||
fi
|
||||
|
||||
if [[ $found = 1 ]]; then
|
||||
sym_size=$(($cur_sym_addr - $sym_addr))
|
||||
[[ $sym_size -lt $sym_elf_size ]] && continue;
|
||||
found=2
|
||||
break
|
||||
fi
|
||||
done < <(${READELF} --symbols --wide $objfile | ${AWK} -v sec=$sym_sec '$7 == sec' | sort --key=2)
|
||||
|
||||
if [[ $found = 0 ]]; then
|
||||
warn "can't find symbol: sym_name: $sym_name sym_sec: $sym_sec sym_addr: $sym_addr sym_elf_size: $sym_elf_size"
|
||||
DONE=1
|
||||
return
|
||||
fi
|
||||
|
||||
# If nothing was found after the symbol, assume it's the last
|
||||
# symbol in the section.
|
||||
[[ $found = 1 ]] && sym_size=$(($sec_size - $sym_addr))
|
||||
|
||||
if [[ -z $sym_size ]] || [[ $sym_size -le 0 ]]; then
|
||||
warn "bad symbol size: sym_addr: $sym_addr cur_sym_addr: $cur_sym_addr"
|
||||
DONE=1
|
||||
return
|
||||
fi
|
||||
|
||||
sym_size=0x$(printf %x $sym_size)
|
||||
|
||||
# calculate the address
|
||||
local addr=$(($sym_base + $offset))
|
||||
# Calculate the section address from user-supplied offset:
|
||||
local addr=$(($sym_addr + $offset))
|
||||
if [[ -z $addr ]] || [[ $addr = 0 ]]; then
|
||||
warn "bad address: $sym_base + $offset"
|
||||
warn "bad address: $sym_addr + $offset"
|
||||
DONE=1
|
||||
return
|
||||
fi
|
||||
addr=0x$(printf %x $addr)
|
||||
|
||||
# weed out non-function symbols
|
||||
if [[ $sym_type != t ]] && [[ $sym_type != T ]]; then
|
||||
# If the user provided a size, make sure it matches the symbol's size:
|
||||
if [[ -n $user_size ]] && [[ $user_size -ne $sym_size ]]; then
|
||||
[[ $print_warnings = 1 ]] &&
|
||||
echo "skipping $func address at $addr due to non-function symbol of type '$sym_type'"
|
||||
continue
|
||||
fi
|
||||
|
||||
# if the user provided a size, make sure it matches the symbol's size
|
||||
if [[ -n $size ]] && [[ $size -ne $sym_size ]]; then
|
||||
[[ $print_warnings = 1 ]] &&
|
||||
echo "skipping $func address at $addr due to size mismatch ($size != $sym_size)"
|
||||
echo "skipping $sym_name address at $addr due to size mismatch ($user_size != $sym_size)"
|
||||
continue;
|
||||
fi
|
||||
|
||||
# make sure the provided offset is within the symbol's range
|
||||
# Make sure the provided offset is within the symbol's range:
|
||||
if [[ $offset -gt $sym_size ]]; then
|
||||
[[ $print_warnings = 1 ]] &&
|
||||
echo "skipping $func address at $addr due to size mismatch ($offset > $sym_size)"
|
||||
echo "skipping $sym_name address at $addr due to size mismatch ($offset > $sym_size)"
|
||||
continue
|
||||
fi
|
||||
|
||||
# separate multiple entries with a blank line
|
||||
# In case of duplicates or multiple addresses specified on the
|
||||
# cmdline, separate multiple entries with a blank line:
|
||||
[[ $FIRST = 0 ]] && echo
|
||||
FIRST=0
|
||||
|
||||
# pass real address to addr2line
|
||||
echo "$func+$offset/$sym_size:"
|
||||
local file_lines=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
|
||||
[[ -z $file_lines ]] && return
|
||||
echo "$sym_name+$offset/$sym_size:"
|
||||
|
||||
# Pass section address to addr2line and strip absolute paths
|
||||
# from the output:
|
||||
local output=$(${ADDR2LINE} -fpie $objfile $addr | sed "s; $dir_prefix\(\./\)*; ;")
|
||||
[[ -z $output ]] && continue
|
||||
|
||||
# Default output (non --list):
|
||||
if [[ $LIST = 0 ]]; then
|
||||
echo "$file_lines" | while read -r line
|
||||
echo "$output" | while read -r line
|
||||
do
|
||||
echo $line
|
||||
done
|
||||
DONE=1;
|
||||
return
|
||||
continue
|
||||
fi
|
||||
|
||||
# show each line with context
|
||||
echo "$file_lines" | while read -r line
|
||||
# For --list, show each line with its corresponding source code:
|
||||
echo "$output" | while read -r line
|
||||
do
|
||||
echo
|
||||
echo $line
|
||||
|
|
@ -184,12 +228,12 @@ __faddr2line() {
|
|||
n1=$[$n-5]
|
||||
n2=$[$n+5]
|
||||
f=$(echo $line | sed 's/.*at \(.\+\):.*/\1/g')
|
||||
awk 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
|
||||
${AWK} 'NR>=strtonum("'$n1'") && NR<=strtonum("'$n2'") { if (NR=='$n') printf(">%d<", NR); else printf(" %d ", NR); printf("\t%s\n", $0)}' $f
|
||||
done
|
||||
|
||||
DONE=1
|
||||
|
||||
done < <(${NM} -n $objfile | awk -v fn=$func -v end=$file_end '$3 == fn { found=1; line=$0; start=$1; next } found == 1 { found=0; print line, "0x"$1 } END {if (found == 1) print line, end; }')
|
||||
done < <(${READELF} --symbols --wide $objfile | ${AWK} -v fn=$sym_name '$4 == "FUNC" && $8 == fn')
|
||||
}
|
||||
|
||||
[[ $# -lt 2 ]] && usage
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче