Merge remote-tracking branch 'regulator/topic/enable-invert' into v3.9-rc8

drivers/regulator/88pm8607.c

@@ -220,35 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static int pm8606_preg_enable(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-
-	return pm860x_set_bits(info->i2c, rdev->desc->enable_reg,
-			       1 << rdev->desc->enable_mask, 0);
-}
-
-static int pm8606_preg_disable(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-
-	return pm860x_set_bits(info->i2c, rdev->desc->enable_reg,
-			       1 << rdev->desc->enable_mask,
-			       1 << rdev->desc->enable_mask);
-}
-
-static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	int ret;
-
-	ret = pm860x_reg_read(info->i2c, rdev->desc->enable_reg);
-	if (ret < 0)
-		return ret;
-
-	return !((unsigned char)ret & (1 << rdev->desc->enable_mask));
-}
-
 static struct regulator_ops pm8607_regulator_ops = {
 	.list_voltage	= pm8607_list_voltage,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -259,9 +230,9 @@ static struct regulator_ops pm8607_regulator_ops = {
 };
 
 static struct regulator_ops pm8606_preg_ops = {
-	.enable		= pm8606_preg_enable,
-	.disable	= pm8606_preg_disable,
-	.is_enabled	= pm8606_preg_is_enabled,
+	.enable		= regulator_enable_regmap,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
 };
 
 #define PM8606_PREG(ereg, ebit)						\
@@ -274,6 +245,7 @@ static struct regulator_ops pm8606_preg_ops = {
 		.owner	= THIS_MODULE,					\
 		.enable_reg = PM8606_##ereg,				\
 		.enable_mask = (ebit),					\
+		.enable_is_inverted = true,				\
 	},								\
 }
 

drivers/regulator/core.c

@@ -1803,6 +1803,9 @@ int regulator_is_enabled_regmap(struct regulator_dev *rdev)
 	if (ret != 0)
 		return ret;
 
+	if (rdev->desc->enable_is_inverted)
+		return (val & rdev->desc->enable_mask) == 0;
+	else
 		return (val & rdev->desc->enable_mask) != 0;
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
@@ -1818,9 +1821,15 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
  */
 int regulator_enable_regmap(struct regulator_dev *rdev)
 {
+	unsigned int val;
+
+	if (rdev->desc->enable_is_inverted)
+		val = 0;
+	else
+		val = rdev->desc->enable_mask;
+
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-				  rdev->desc->enable_mask,
-				  rdev->desc->enable_mask);
+				  rdev->desc->enable_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_enable_regmap);
 
@@ -1835,8 +1844,15 @@ EXPORT_SYMBOL_GPL(regulator_enable_regmap);
  */
 int regulator_disable_regmap(struct regulator_dev *rdev)
 {
+	unsigned int val;
+
+	if (rdev->desc->enable_is_inverted)
+		val = rdev->desc->enable_mask;
+	else
+		val = 0;
+
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-				  rdev->desc->enable_mask, 0);
+				  rdev->desc->enable_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_disable_regmap);
 

drivers/regulator/max8649.c

@@ -60,36 +60,6 @@ struct max8649_regulator_info {
 	unsigned	ramp_down:1;
 };
 
-/* EN_PD means pulldown on EN input */
-static int max8649_enable(struct regulator_dev *rdev)
-{
-	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
-	return regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_EN_PD, 0);
-}
-
-/*
- * Applied internal pulldown resistor on EN input pin.
- * If pulldown EN pin outside, it would be better.
- */
-static int max8649_disable(struct regulator_dev *rdev)
-{
-	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
-	return regmap_update_bits(info->regmap, MAX8649_CONTROL, MAX8649_EN_PD,
-				MAX8649_EN_PD);
-}
-
-static int max8649_is_enabled(struct regulator_dev *rdev)
-{
-	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(info->regmap, MAX8649_CONTROL, &val);
-	if (ret != 0)
-		return ret;
-	return !((unsigned char)val & MAX8649_EN_PD);
-}
-
 static int max8649_enable_time(struct regulator_dev *rdev)
 {
 	struct max8649_regulator_info *info = rdev_get_drvdata(rdev);
@@ -151,9 +121,9 @@ static struct regulator_ops max8649_dcdc_ops = {
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.list_voltage	= regulator_list_voltage_linear,
 	.map_voltage	= regulator_map_voltage_linear,
-	.enable		= max8649_enable,
-	.disable	= max8649_disable,
-	.is_enabled	= max8649_is_enabled,
+	.enable		= regulator_enable_regmap,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
 	.enable_time	= max8649_enable_time,
 	.set_mode	= max8649_set_mode,
 	.get_mode	= max8649_get_mode,
@@ -169,6 +139,9 @@ static struct regulator_desc dcdc_desc = {
 	.vsel_mask	= MAX8649_VOL_MASK,
 	.min_uV		= MAX8649_DCDC_VMIN,
 	.uV_step	= MAX8649_DCDC_STEP,
+	.enable_reg	= MAX8649_CONTROL,
+	.enable_mask	= MAX8649_EN_PD,
+	.enable_is_inverted = true,
 };
 
 static struct regmap_config max8649_regmap_config = {

include/linux/regulator/driver.h

@@ -199,6 +199,8 @@ enum regulator_type {
  *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
+ *                      when using regulator_enable_regmap and friends APIs.
  * @bypass_reg: Register for control when using regmap set_bypass
  * @bypass_mask: Mask for control when using regmap set_bypass
  *
@@ -228,6 +230,7 @@ struct regulator_desc {
 	unsigned int apply_bit;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
+	bool enable_is_inverted;
 	unsigned int bypass_reg;
 	unsigned int bypass_mask;