microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: dts: rza2mevb: sort nodes of rza2mevb board 

This patch sorts the nodes of arch/arm/boot/dts/r7s9210-rza2mevb.dts.

* Sort subnodes of root ("/") node alphabetically
* Sort following top-level nodes alphabetically
* Sort subnodes of pinctrl alphabetically

Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
[simon: rebase and sort new ehci nodes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Yoshihiro Kaneko 2019-05-17 23:43:07 +09:00 коммит произвёл Simon Horman
Родитель 07d2bf96e0
Коммит 1de78ccbda
1 изменённых файлов: 52 добавлений и 52 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

104
arch/arm/boot/dts/r7s9210-rza2mevb.dts
Просмотреть файл

@ -26,11 +26,6 @@
stdout-path = "serial0:115200n8";
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x00800000>; /* HyperRAM */
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
@ -46,6 +41,41 @@
gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
};
};
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x00800000>; /* HyperRAM */
};
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&ether0 {
pinctrl-names = "default";
pinctrl-0 = <&eth0_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&ether1 {
pinctrl-names = "default";
pinctrl-0 = <&eth1_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy1>;
phy1: ethernet-phy@1 {
reg = <0>;
};
};
/* EXTAL */
@ -53,23 +83,16 @@
clock-frequency = <24000000>; /* 24MHz */
};
/* RTC_X1 */
&rtc_x1_clk {
clock-frequency = <32768>;
/* High resolution System tick timers */
&ostm0 {
status = "okay";
};
/* USB_X1 */
&usb_x1_clk {
clock-frequency = <48000000>;
&ostm1 {
status = "okay";
};
&pinctrl {
/* Serial Console */
scif4_pins: serial4 {
pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
<RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
};
eth0_pins: eth0 {
pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */
<RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */
@ -98,6 +121,12 @@
<RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
};
/* Serial Console */
scif4_pins: serial4 {
pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
<RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
};
sdhi0_pins: sdhi0 {
pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */
<RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */
@ -121,13 +150,9 @@
};
};
/* High resolution System tick timers */
&ostm0 {
status = "okay";
};
&ostm1 {
status = "okay";
/* RTC_X1 */
&rtc_x1_clk {
clock-frequency = <32768>;
};
/* Serial Console */
@ -138,28 +163,6 @@
status = "okay";
};
&ether0 {
pinctrl-names = "default";
pinctrl-0 = <&eth0_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&ether1 {
pinctrl-names = "default";
pinctrl-0 = <&eth1_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy1>;
phy1: ethernet-phy@1 {
reg = <0>;
};
};
&sdhi0 {
pinctrl-names = "default";
pinctrl-0 = <&sdhi0_pins>;
@ -182,10 +185,6 @@
status = "okay";
};
&ehci0 {
status = "okay";
};
/* USB-1 as Host */
&usb2_phy1 {
pinctrl-names = "default";
@ -194,6 +193,7 @@
status = "okay";
};
&ehci1 {
status = "okay";
/* USB_X1 */
&usb_x1_clk {
clock-frequency = <48000000>;
};