powerpc: gpio driver for mpc8349/8572/8610 and compatible

Structured similar to the existing QE GPIO support.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Peter Korsgaard 2008-09-23 17:35:38 +02:00 коммит произвёл Kumar Gala
Родитель 1afb7f809b
Коммит 1e16dfc1ba
4 изменённых файлов: 221 добавлений и 0 удалений

Просмотреть файл

@ -0,0 +1,40 @@
GPIO controllers on MPC8xxx SoCs
This is for the non-QE/CPM/GUTs GPIO controllers as found on
8349, 8572, 8610 and compatible.
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
Required properties:
- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- interrupts : Interrupt mapping for GPIO IRQ (currently unused).
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
Example of gpio-controller nodes for a MPC8347 SoC:
gpio1: gpio-controller@c00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x100>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
gpio2: gpio-controller@d00 {
#gpio-cells = <2>;
compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
reg = <0xd00 0x100>;
interrupts = <75 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
See booting-without-of.txt for details of how to specify GPIO
information for devices.

Просмотреть файл

@ -7,6 +7,15 @@ config PPC4xx_PCI_EXPRESS
depends on PCI && 4xx
default n
config MPC8xxx_GPIO
bool "MPC8xxx GPIO support"
depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Say Y here if you're going to use hardware that connects to the
MPC831x/834x/837x/8572/8610 GPIOs.
config PPC_MSI_BITMAP
bool
depends on PCI_MSI

Просмотреть файл

@ -16,6 +16,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/

Просмотреть файл

@ -0,0 +1,171 @@
/*
* GPIOs on MPC8349/8572/8610 and compatible
*
* Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#define MPC8XXX_GPIO_PINS 32
#define GPIO_DIR 0x00
#define GPIO_ODR 0x04
#define GPIO_DAT 0x08
#define GPIO_IER 0x0c
#define GPIO_IMR 0x10
#define GPIO_ICR 0x14
struct mpc8xxx_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
/*
* shadowed data register to be able to clear/set output pins in
* open drain mode safely
*/
u32 data;
};
static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
{
return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
}
static inline struct mpc8xxx_gpio_chip *
to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
{
return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
}
static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
}
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
}
static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
if (val)
mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
else
mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
return 0;
}
static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
mpc8xxx_gpio_set(gc, gpio, val);
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
return 0;
}
static void __init mpc8xxx_add_controller(struct device_node *np)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc;
struct of_mm_gpio_chip *mm_gc;
struct of_gpio_chip *of_gc;
struct gpio_chip *gc;
int ret;
mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
if (!mpc8xxx_gc) {
ret = -ENOMEM;
goto err;
}
spin_lock_init(&mpc8xxx_gc->lock);
mm_gc = &mpc8xxx_gc->mm_gc;
of_gc = &mm_gc->of_gc;
gc = &of_gc->gc;
mm_gc->save_regs = mpc8xxx_gpio_save_regs;
of_gc->gpio_cells = 2;
gc->ngpio = MPC8XXX_GPIO_PINS;
gc->direction_input = mpc8xxx_gpio_dir_in;
gc->direction_output = mpc8xxx_gpio_dir_out;
gc->get = mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
ret = of_mm_gpiochip_add(np, mm_gc);
if (ret)
goto err;
return;
err:
pr_err("%s: registration failed with status %d\n",
np->full_name, ret);
kfree(mpc8xxx_gc);
return;
}
static int __init mpc8xxx_add_gpiochips(void)
{
struct device_node *np;
for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio")
mpc8xxx_add_controller(np);
for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio")
mpc8xxx_add_controller(np);
for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio")
mpc8xxx_add_controller(np);
return 0;
}
arch_initcall(mpc8xxx_add_gpiochips);