scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host

The host makes direct calls into phy using ufs_qcom_phy_*()
APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy
which is not being used by any architecture as yet. Future
architectures too are not going to use 20nm ufs phy.
So remove these ufs_qcom_phy_*() calls from host to let further
change declare the 20nm phy as broken.
Also remove couple of stale enum defines for ufs phy.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/qualcomm/phy-qcom-ufs-i.h

@@ -17,9 +17,9 @@
 
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
-#include <linux/phy/phy-qcom-ufs.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>

drivers/scsi/ufs/ufs-qcom.c

@@ -16,7 +16,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
-#include <linux/phy/phy-qcom-ufs.h>
 
 #include "ufshcd.h"
 #include "ufshcd-pltfrm.h"
@@ -189,22 +188,9 @@ out:
 
 static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
 {
-	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct phy *phy = host->generic_phy;
 	u32 tx_lanes;
-	int err = 0;
 
-	err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
-	if (err)
-		goto out;
-
-	err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes);
-	if (err)
-		dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n",
-			__func__);
-
-out:
-	return err;
+	return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
 }
 
 static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
@@ -932,10 +918,8 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 {
 	u32 val;
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct phy *phy = host->generic_phy;
 	struct ufs_qcom_dev_params ufs_qcom_cap;
 	int ret = 0;
-	int res = 0;
 
 	if (!dev_req_params) {
 		pr_err("%s: incoming dev_req_params is NULL\n", __func__);
@@ -1002,12 +986,6 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
 		}
 
 		val = ~(MAX_U32 << dev_req_params->lane_tx);
-		res = ufs_qcom_phy_set_tx_lane_enable(phy, val);
-		if (res) {
-			dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n",
-				__func__, res);
-			ret = res;
-		}
 
 		/* cache the power mode parameters to use internally */
 		memcpy(&host->dev_req_params,
@@ -1264,10 +1242,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 		}
 	}
 
-	/* update phy revision information before calling phy_init() */
-	ufs_qcom_phy_save_controller_version(host->generic_phy,
-		host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
-
 	err = ufs_qcom_init_lane_clks(host);
 	if (err)
 		goto out_variant_clear;

drivers/scsi/ufs/ufs-qcom.h

@@ -129,11 +129,6 @@ enum {
 	MASK_CLK_NS_REG                     = 0xFFFC00,
 };
 
-enum ufs_qcom_phy_init_type {
-	UFS_PHY_INIT_FULL,
-	UFS_PHY_INIT_CFG_RESTORE,
-};
-
 /* QCOM UFS debug print bit mask */
 #define UFS_QCOM_DBG_PRINT_REGS_EN	BIT(0)
 #define UFS_QCOM_DBG_PRINT_ICE_REGS_EN	BIT(1)

include/linux/phy/phy-qcom-ufs.h

@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef PHY_QCOM_UFS_H_
-#define PHY_QCOM_UFS_H_
-
-#include "phy.h"
-
-int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
-void ufs_qcom_phy_save_controller_version(struct phy *phy,
-			u8 major, u16 minor, u16 step);
-
-#endif /* PHY_QCOM_UFS_H_ */