diff --git a/CREDITS b/CREDITS index 192f749eba25..1b4f8694fa48 100644 --- a/CREDITS +++ b/CREDITS @@ -611,8 +611,7 @@ S: USA N: Randolph Chung E: tausq@debian.org D: Linux/PA-RISC hacker -S: Los Altos, CA 94022 -S: USA +S: Hong Kong N: Juan Jose Ciarlante W: http://juanjox.kernelnotes.org/ @@ -3405,6 +3404,15 @@ S: Chudenicka 8 S: 10200 Prague 10, Hostivar S: Czech Republic +N: Thibaut Varene +E: T-Bone@parisc-linux.org +W: http://www.parisc-linux.org/ +P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C FA2F 1E32 C3DA B7D2 F063 +D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits +D: Some bits in an ARM port, S1D13XXX FB driver, random patches here and there +D: AD1889 sound driver +S: Paris, France + N: Heikki Vatiainen E: hessu@cs.tut.fi D: Co-author of Multi-Protocol Over ATM (MPOA), some LANE hacks diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 433cf5e9ae04..5f7f7d7f77d2 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -24,6 +24,8 @@ DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms. DocBook/ - directory with DocBook templates etc. for kernel documentation. +HOWTO + - The process and procedures of how to do Linux kernel development. IO-mapping.txt - how to access I/O mapped memory from within device drivers. IPMI.txt @@ -256,6 +258,10 @@ specialix.txt - info on hardware/driver for specialix IO8+ multiport serial card. spinlocks.txt - info on using spinlocks to provide exclusive access in kernel. +stable_api_nonsense.txt + - info on why the kernel does not have a stable in-kernel api or abi. +stable_kernel_rules.txt + - rules and procedures for the -stable kernel releases. stallion.txt - info on using the Stallion multiport serial driver. svga.txt diff --git a/Documentation/HOWTO b/Documentation/HOWTO new file mode 100644 index 000000000000..6c9e746267da --- /dev/null +++ b/Documentation/HOWTO @@ -0,0 +1,618 @@ +HOWTO do Linux kernel development +--------------------------------- + +This is the be-all, end-all document on this topic. It contains +instructions on how to become a Linux kernel developer and how to learn +to work with the Linux kernel development community. It tries to not +contain anything related to the technical aspects of kernel programming, +but will help point you in the right direction for that. + +If anything in this document becomes out of date, please send in patches +to the maintainer of this file, who is listed at the bottom of the +document. + + +Introduction +------------ + +So, you want to learn how to become a Linux kernel developer? Or you +have been told by your manager, "Go write a Linux driver for this +device." This document's goal is to teach you everything you need to +know to achieve this by describing the process you need to go through, +and hints on how to work with the community. It will also try to +explain some of the reasons why the community works like it does. + +The kernel is written mostly in C, with some architecture-dependent +parts written in assembly. A good understanding of C is required for +kernel development. Assembly (any architecture) is not required unless +you plan to do low-level development for that architecture. Though they +are not a good substitute for a solid C education and/or years of +experience, the following books are good for, if anything, reference: + - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall] + - "Practical C Programming" by Steve Oualline [O'Reilly] + +The kernel is written using GNU C and the GNU toolchain. While it +adheres to the ISO C89 standard, it uses a number of extensions that are +not featured in the standard. The kernel is a freestanding C +environment, with no reliance on the standard C library, so some +portions of the C standard are not supported. Arbitrary long long +divisions and floating point are not allowed. It can sometimes be +difficult to understand the assumptions the kernel has on the toolchain +and the extensions that it uses, and unfortunately there is no +definitive reference for them. Please check the gcc info pages (`info +gcc`) for some information on them. + +Please remember that you are trying to learn how to work with the +existing development community. It is a diverse group of people, with +high standards for coding, style and procedure. These standards have +been created over time based on what they have found to work best for +such a large and geographically dispersed team. Try to learn as much as +possible about these standards ahead of time, as they are well +documented; do not expect people to adapt to you or your company's way +of doing things. + + +Legal Issues +------------ + +The Linux kernel source code is released under the GPL. Please see the +file, COPYING, in the main directory of the source tree, for details on +the license. If you have further questions about the license, please +contact a lawyer, and do not ask on the Linux kernel mailing list. The +people on the mailing lists are not lawyers, and you should not rely on +their statements on legal matters. + +For common questions and answers about the GPL, please see: + http://www.gnu.org/licenses/gpl-faq.html + + +Documentation +------------ + +The Linux kernel source tree has a large range of documents that are +invaluable for learning how to interact with the kernel community. When +new features are added to the kernel, it is recommended that new +documentation files are also added which explain how to use the feature. +When a kernel change causes the interface that the kernel exposes to +userspace to change, it is recommended that you send the information or +a patch to the manual pages explaining the change to the manual pages +maintainer at mtk-manpages@gmx.net. + +Here is a list of files that are in the kernel source tree that are +required reading: + README + This file gives a short background on the Linux kernel and describes + what is necessary to do to configure and build the kernel. People + who are new to the kernel should start here. + + Documentation/Changes + This file gives a list of the minimum levels of various software + packages that are necessary to build and run the kernel + successfully. + + Documentation/CodingStyle + This describes the Linux kernel coding style, and some of the + rationale behind it. All new code is expected to follow the + guidelines in this document. Most maintainers will only accept + patches if these rules are followed, and many people will only + review code if it is in the proper style. + + Documentation/SubmittingPatches + Documentation/SubmittingDrivers + These files describe in explicit detail how to successfully create + and send a patch, including (but not limited to): + - Email contents + - Email format + - Who to send it to + Following these rules will not guarantee success (as all patches are + subject to scrutiny for content and style), but not following them + will almost always prevent it. + + Other excellent descriptions of how to create patches properly are: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + "Linux kernel patch submission format" + http://linux.yyz.us/patch-format.html + + Documentation/stable_api_nonsense.txt + This file describes the rationale behind the conscious decision to + not have a stable API within the kernel, including things like: + - Subsystem shim-layers (for compatibility?) + - Driver portability between Operating Systems. + - Mitigating rapid change within the kernel source tree (or + preventing rapid change) + This document is crucial for understanding the Linux development + philosophy and is very important for people moving to Linux from + development on other Operating Systems. + + Documentation/SecurityBugs + If you feel you have found a security problem in the Linux kernel, + please follow the steps in this document to help notify the kernel + developers, and help solve the issue. + + Documentation/ManagementStyle + This document describes how Linux kernel maintainers operate and the + shared ethos behind their methodologies. This is important reading + for anyone new to kernel development (or anyone simply curious about + it), as it resolves a lot of common misconceptions and confusion + about the unique behavior of kernel maintainers. + + Documentation/stable_kernel_rules.txt + This file describes the rules on how the stable kernel releases + happen, and what to do if you want to get a change into one of these + releases. + + Documentation/kernel-docs.txt + A list of external documentation that pertains to kernel + development. Please consult this list if you do not find what you + are looking for within the in-kernel documentation. + + Documentation/applying-patches.txt + A good introduction describing exactly what a patch is and how to + apply it to the different development branches of the kernel. + +The kernel also has a large number of documents that can be +automatically generated from the source code itself. This includes a +full description of the in-kernel API, and rules on how to handle +locking properly. The documents will be created in the +Documentation/DocBook/ directory and can be generated as PDF, +Postscript, HTML, and man pages by running: + make pdfdocs + make psdocs + make htmldocs + make mandocs +respectively from the main kernel source directory. + + +Becoming A Kernel Developer +--------------------------- + +If you do not know anything about Linux kernel development, you should +look at the Linux KernelNewbies project: + http://kernelnewbies.org +It consists of a helpful mailing list where you can ask almost any type +of basic kernel development question (make sure to search the archives +first, before asking something that has already been answered in the +past.) It also has an IRC channel that you can use to ask questions in +real-time, and a lot of helpful documentation that is useful for +learning about Linux kernel development. + +The website has basic information about code organization, subsystems, +and current projects (both in-tree and out-of-tree). It also describes +some basic logistical information, like how to compile a kernel and +apply a patch. + +If you do not know where you want to start, but you want to look for +some task to start doing to join into the kernel development community, +go to the Linux Kernel Janitor's project: + http://janitor.kernelnewbies.org/ +It is a great place to start. It describes a list of relatively simple +problems that need to be cleaned up and fixed within the Linux kernel +source tree. Working with the developers in charge of this project, you +will learn the basics of getting your patch into the Linux kernel tree, +and possibly be pointed in the direction of what to go work on next, if +you do not already have an idea. + +If you already have a chunk of code that you want to put into the kernel +tree, but need some help getting it in the proper form, the +kernel-mentors project was created to help you out with this. It is a +mailing list, and can be found at: + http://selenic.com/mailman/listinfo/kernel-mentors + +Before making any actual modifications to the Linux kernel code, it is +imperative to understand how the code in question works. For this +purpose, nothing is better than reading through it directly (most tricky +bits are commented well), perhaps even with the help of specialized +tools. One such tool that is particularly recommended is the Linux +Cross-Reference project, which is able to present source code in a +self-referential, indexed webpage format. An excellent up-to-date +repository of the kernel code may be found at: + http://sosdg.org/~coywolf/lxr/ + + +The development process +----------------------- + +Linux kernel development process currently consists of a few different +main kernel "branches" and lots of different subsystem-specific kernel +branches. These different branches are: + - main 2.6.x kernel tree + - 2.6.x.y -stable kernel tree + - 2.6.x -git kernel patches + - 2.6.x -mm kernel patches + - subsystem specific kernel trees and patches + +2.6.x kernel tree +----------------- +2.6.x kernels are maintained by Linus Torvalds, and can be found on +kernel.org in the pub/linux/kernel/v2.6/ directory. Its development +process is as follows: + - As soon as a new kernel is released a two weeks window is open, + during this period of time maintainers can submit big diffs to + Linus, usually the patches that have already been included in the + -mm kernel for a few weeks. The preferred way to submit big changes + is using git (the kernel's source management tool, more information + can be found at http://git.or.cz/) but plain patches are also just + fine. + - After two weeks a -rc1 kernel is released it is now possible to push + only patches that do not include new features that could affect the + stability of the whole kernel. Please note that a whole new driver + (or filesystem) might be accepted after -rc1 because there is no + risk of causing regressions with such a change as long as the change + is self-contained and does not affect areas outside of the code that + is being added. git can be used to send patches to Linus after -rc1 + is released, but the patches need to also be sent to a public + mailing list for review. + - A new -rc is released whenever Linus deems the current git tree to + be in a reasonably sane state adequate for testing. The goal is to + release a new -rc kernel every week. + - Process continues until the kernel is considered "ready", the + process should last around 6 weeks. + +It is worth mentioning what Andrew Morton wrote on the linux-kernel +mailing list about kernel releases: + "Nobody knows when a kernel will be released, because it's + released according to perceived bug status, not according to a + preconceived timeline." + +2.6.x.y -stable kernel tree +--------------------------- +Kernels with 4 digit versions are -stable kernels. They contain +relatively small and critical fixes for security problems or significant +regressions discovered in a given 2.6.x kernel. + +This is the recommended branch for users who want the most recent stable +kernel and are not interested in helping test development/experimental +versions. + +If no 2.6.x.y kernel is available, then the highest numbered 2.6.x +kernel is the current stable kernel. + +2.6.x.y are maintained by the "stable" team , and are +released almost every other week. + +The file Documentation/stable_kernel_rules.txt in the kernel tree +documents what kinds of changes are acceptable for the -stable tree, and +how the release process works. + +2.6.x -git patches +------------------ +These are daily snapshots of Linus' kernel tree which are managed in a +git repository (hence the name.) These patches are usually released +daily and represent the current state of Linus' tree. They are more +experimental than -rc kernels since they are generated automatically +without even a cursory glance to see if they are sane. + +2.6.x -mm kernel patches +------------------------ +These are experimental kernel patches released by Andrew Morton. Andrew +takes all of the different subsystem kernel trees and patches and mushes +them together, along with a lot of patches that have been plucked from +the linux-kernel mailing list. This tree serves as a proving ground for +new features and patches. Once a patch has proved its worth in -mm for +a while Andrew or the subsystem maintainer pushes it on to Linus for +inclusion in mainline. + +It is heavily encouraged that all new patches get tested in the -mm tree +before they are sent to Linus for inclusion in the main kernel tree. + +These kernels are not appropriate for use on systems that are supposed +to be stable and they are more risky to run than any of the other +branches. + +If you wish to help out with the kernel development process, please test +and use these kernel releases and provide feedback to the linux-kernel +mailing list if you have any problems, and if everything works properly. + +In addition to all the other experimental patches, these kernels usually +also contain any changes in the mainline -git kernels available at the +time of release. + +The -mm kernels are not released on a fixed schedule, but usually a few +-mm kernels are released in between each -rc kernel (1 to 3 is common). + +Subsystem Specific kernel trees and patches +------------------------------------------- +A number of the different kernel subsystem developers expose their +development trees so that others can see what is happening in the +different areas of the kernel. These trees are pulled into the -mm +kernel releases as described above. + +Here is a list of some of the different kernel trees available: + git trees: + - Kbuild development tree, Sam Ravnborg + kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git + + - ACPI development tree, Len Brown + kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git + + - Block development tree, Jens Axboe + kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git + + - DRM development tree, Dave Airlie + kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git + + - ia64 development tree, Tony Luck + kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git + + - ieee1394 development tree, Jody McIntyre + kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git + + - infiniband, Roland Dreier + kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git + + - libata, Jeff Garzik + kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git + + - network drivers, Jeff Garzik + kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git + + - pcmcia, Dominik Brodowski + kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git + + - SCSI, James Bottomley + kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git + + Other git kernel trees can be found listed at http://kernel.org/git + + quilt trees: + - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman + kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ + + +Bug Reporting +------------- + +bugzilla.kernel.org is where the Linux kernel developers track kernel +bugs. Users are encouraged to report all bugs that they find in this +tool. For details on how to use the kernel bugzilla, please see: + http://test.kernel.org/bugzilla/faq.html + +The file REPORTING-BUGS in the main kernel source directory has a good +template for how to report a possible kernel bug, and details what kind +of information is needed by the kernel developers to help track down the +problem. + + +Mailing lists +------------- + +As some of the above documents describe, the majority of the core kernel +developers participate on the Linux Kernel Mailing list. Details on how +to subscribe and unsubscribe from the list can be found at: + http://vger.kernel.org/vger-lists.html#linux-kernel +There are archives of the mailing list on the web in many different +places. Use a search engine to find these archives. For example: + http://dir.gmane.org/gmane.linux.kernel +It is highly recommended that you search the archives about the topic +you want to bring up, before you post it to the list. A lot of things +already discussed in detail are only recorded at the mailing list +archives. + +Most of the individual kernel subsystems also have their own separate +mailing list where they do their development efforts. See the +MAINTAINERS file for a list of what these lists are for the different +groups. + +Many of the lists are hosted on kernel.org. Information on them can be +found at: + http://vger.kernel.org/vger-lists.html + +Please remember to follow good behavioral habits when using the lists. +Though a bit cheesy, the following URL has some simple guidelines for +interacting with the list (or any list): + http://www.albion.com/netiquette/ + +If multiple people respond to your mail, the CC: list of recipients may +get pretty large. Don't remove anybody from the CC: list without a good +reason, or don't reply only to the list address. Get used to receiving the +mail twice, one from the sender and the one from the list, and don't try +to tune that by adding fancy mail-headers, people will not like it. + +Remember to keep the context and the attribution of your replies intact, +keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and +add your statements between the individual quoted sections instead of +writing at the top of the mail. + +If you add patches to your mail, make sure they are plain readable text +as stated in Documentation/SubmittingPatches. Kernel developers don't +want to deal with attachments or compressed patches; they may want +to comment on individual lines of your patch, which works only that way. +Make sure you use a mail program that does not mangle spaces and tab +characters. A good first test is to send the mail to yourself and try +to apply your own patch by yourself. If that doesn't work, get your +mail program fixed or change it until it works. + +Above all, please remember to show respect to other subscribers. + + +Working with the community +-------------------------- + +The goal of the kernel community is to provide the best possible kernel +there is. When you submit a patch for acceptance, it will be reviewed +on its technical merits and those alone. So, what should you be +expecting? + - criticism + - comments + - requests for change + - requests for justification + - silence + +Remember, this is part of getting your patch into the kernel. You have +to be able to take criticism and comments about your patches, evaluate +them at a technical level and either rework your patches or provide +clear and concise reasoning as to why those changes should not be made. +If there are no responses to your posting, wait a few days and try +again, sometimes things get lost in the huge volume. + +What should you not do? + - expect your patch to be accepted without question + - become defensive + - ignore comments + - resubmit the patch without making any of the requested changes + +In a community that is looking for the best technical solution possible, +there will always be differing opinions on how beneficial a patch is. +You have to be cooperative, and willing to adapt your idea to fit within +the kernel. Or at least be willing to prove your idea is worth it. +Remember, being wrong is acceptable as long as you are willing to work +toward a solution that is right. + +It is normal that the answers to your first patch might simply be a list +of a dozen things you should correct. This does _not_ imply that your +patch will not be accepted, and it is _not_ meant against you +personally. Simply correct all issues raised against your patch and +resend it. + + +Differences between the kernel community and corporate structures +----------------------------------------------------------------- + +The kernel community works differently than most traditional corporate +development environments. Here are a list of things that you can try to +do to try to avoid problems: + Good things to say regarding your proposed changes: + - "This solves multiple problems." + - "This deletes 2000 lines of code." + - "Here is a patch that explains what I am trying to describe." + - "I tested it on 5 different architectures..." + - "Here is a series of small patches that..." + - "This increases performance on typical machines..." + + Bad things you should avoid saying: + - "We did it this way in AIX/ptx/Solaris, so therefore it must be + good..." + - "I've being doing this for 20 years, so..." + - "This is required for my company to make money" + - "This is for our Enterprise product line." + - "Here is my 1000 page design document that describes my idea" + - "I've been working on this for 6 months..." + - "Here's a 5000 line patch that..." + - "I rewrote all of the current mess, and here it is..." + - "I have a deadline, and this patch needs to be applied now." + +Another way the kernel community is different than most traditional +software engineering work environments is the faceless nature of +interaction. One benefit of using email and irc as the primary forms of +communication is the lack of discrimination based on gender or race. +The Linux kernel work environment is accepting of women and minorities +because all you are is an email address. The international aspect also +helps to level the playing field because you can't guess gender based on +a person's name. A man may be named Andrea and a woman may be named Pat. +Most women who have worked in the Linux kernel and have expressed an +opinion have had positive experiences. + +The language barrier can cause problems for some people who are not +comfortable with English. A good grasp of the language can be needed in +order to get ideas across properly on mailing lists, so it is +recommended that you check your emails to make sure they make sense in +English before sending them. + + +Break up your changes +--------------------- + +The Linux kernel community does not gladly accept large chunks of code +dropped on it all at once. The changes need to be properly introduced, +discussed, and broken up into tiny, individual portions. This is almost +the exact opposite of what companies are used to doing. Your proposal +should also be introduced very early in the development process, so that +you can receive feedback on what you are doing. It also lets the +community feel that you are working with them, and not simply using them +as a dumping ground for your feature. However, don't send 50 emails at +one time to a mailing list, your patch series should be smaller than +that almost all of the time. + +The reasons for breaking things up are the following: + +1) Small patches increase the likelihood that your patches will be + applied, since they don't take much time or effort to verify for + correctness. A 5 line patch can be applied by a maintainer with + barely a second glance. However, a 500 line patch may take hours to + review for correctness (the time it takes is exponentially + proportional to the size of the patch, or something). + + Small patches also make it very easy to debug when something goes + wrong. It's much easier to back out patches one by one than it is + to dissect a very large patch after it's been applied (and broken + something). + +2) It's important not only to send small patches, but also to rewrite + and simplify (or simply re-order) patches before submitting them. + +Here is an analogy from kernel developer Al Viro: + "Think of a teacher grading homework from a math student. The + teacher does not want to see the student's trials and errors + before they came up with the solution. They want to see the + cleanest, most elegant answer. A good student knows this, and + would never submit her intermediate work before the final + solution." + + The same is true of kernel development. The maintainers and + reviewers do not want to see the thought process behind the + solution to the problem one is solving. They want to see a + simple and elegant solution." + +It may be challenging to keep the balance between presenting an elegant +solution and working together with the community and discussing your +unfinished work. Therefore it is good to get early in the process to +get feedback to improve your work, but also keep your changes in small +chunks that they may get already accepted, even when your whole task is +not ready for inclusion now. + +Also realize that it is not acceptable to send patches for inclusion +that are unfinished and will be "fixed up later." + + +Justify your change +------------------- + +Along with breaking up your patches, it is very important for you to let +the Linux community know why they should add this change. New features +must be justified as being needed and useful. + + +Document your change +-------------------- + +When sending in your patches, pay special attention to what you say in +the text in your email. This information will become the ChangeLog +information for the patch, and will be preserved for everyone to see for +all time. It should describe the patch completely, containing: + - why the change is necessary + - the overall design approach in the patch + - implementation details + - testing results + +For more details on what this should all look like, please see the +ChangeLog section of the document: + "The Perfect Patch" + http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt + + + + +All of these things are sometimes very hard to do. It can take years to +perfect these practices (if at all). It's a continuous process of +improvement that requires a lot of patience and determination. But +don't give up, it's possible. Many have done it before, and each had to +start exactly where you are now. + + + + +---------- +Thanks to Paolo Ciarrocchi who allowed the "Development Process" section +to be based on text he had written, and to Randy Dunlap and Gerrit +Huizenga for some of the list of things you should and should not say. +Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers, +Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi +Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop, +David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for +their review, comments, and contributions. Without their help, this +document would not have been possible. + + + +Maintainer: Greg Kroah-Hartman diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt index 4b1c93a8177b..dc6045577a8b 100644 --- a/Documentation/arm/memory.txt +++ b/Documentation/arm/memory.txt @@ -1,7 +1,7 @@ Kernel Memory Layout on ARM Linux Russell King - May 21, 2004 (2.6.6) + November 17, 2005 (2.6.15) This document describes the virtual memory layout which the Linux kernel uses for ARM processors. It indicates which regions are @@ -37,6 +37,8 @@ ff000000 ffbfffff Reserved for future expansion of DMA mapping region. VMALLOC_END feffffff Free for platform use, recommended. + VMALLOC_END must be aligned to a 2MB + boundary. VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space. Memory returned by vmalloc/ioremap will diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 0f515175c72a..3c406acd4dfa 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2903,14 +2903,14 @@ Your cooperation is appreciated. 196 = /dev/dvb/adapter3/video0 first video decoder of fourth card -216 char USB BlueTooth devices - 0 = /dev/ttyUB0 First USB BlueTooth device - 1 = /dev/ttyUB1 Second USB BlueTooth device +216 char Bluetooth RFCOMM TTY devices + 0 = /dev/rfcomm0 First Bluetooth RFCOMM TTY device + 1 = /dev/rfcomm1 Second Bluetooth RFCOMM TTY device ... -217 char USB BlueTooth devices (alternate devices) - 0 = /dev/cuub0 Callout device for ttyUB0 - 1 = /dev/cuub1 Callout device for ttyUB1 +217 char Bluetooth RFCOMM TTY devices (alternate devices) + 0 = /dev/curf0 Callout device for rfcomm0 + 1 = /dev/curf1 Callout device for rfcomm1 ... 218 char The Logical Company bus Unibus/Qbus adapters diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 24fe8edad304..9b743198f77a 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -149,3 +149,13 @@ Files: drivers/md/md.c Why: Not reliable by design - can fail when most needed. Alternatives exist Who: NeilBrown + +--------------------------- + +What: au1x00_uart driver +When: January 2006 +Why: The 8250 serial driver now has the ability to deal with the differences + between the standard 8250 family of UARTs and their slightly strange + brother on Alchemy SOCs. The loss of features is not considered an + issue. +Who: Ralf Baechle diff --git a/Documentation/usb/bluetooth.txt b/Documentation/usb/bluetooth.txt deleted file mode 100644 index 774f5d3835cc..000000000000 --- a/Documentation/usb/bluetooth.txt +++ /dev/null @@ -1,44 +0,0 @@ -INTRODUCTION - - The USB Bluetooth driver supports any USB Bluetooth device. - It currently works well with the Linux USB Bluetooth stack from Axis - (available at http://developer.axis.com/software/bluetooth/ ) and - has been rumored to work with other Linux USB Bluetooth stacks. - - -CONFIGURATION - - Currently the driver can handle up to 256 different USB Bluetooth - devices at once. - - If you are not using devfs: - The major number that the driver uses is 216 so to use the driver, - create the following nodes: - mknod /dev/ttyUB0 c 216 0 - mknod /dev/ttyUB1 c 216 1 - mknod /dev/ttyUB2 c 216 2 - mknod /dev/ttyUB3 c 216 3 - . - . - . - mknod /dev/ttyUB254 c 216 254 - mknod /dev/ttyUB255 c 216 255 - - If you are using devfs: - The devices supported by this driver will show up as - /dev/usb/ttub/{0,1,...} - - When the device is connected and recognized by the driver, the driver - will print to the system log, which node the device has been bound to. - - -CONTACT: - - If anyone has any problems using this driver, please contact me, or - join the Linux-USB mailing list (information on joining the mailing - list, as well as a link to its searchable archive is at - http://www.linux-usb.org/ ) - - -Greg Kroah-Hartman -greg@kroah.com diff --git a/MAINTAINERS b/MAINTAINERS index 509927e40bbb..f239ac4762dd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -58,6 +58,7 @@ P: Person M: Mail patches to L: Mailing list that is relevant to this area W: Web-page with status/info +T: SCM tree type and URL. Type is one of: git, hg, quilt. S: Status, one of the following: Supported: Someone is actually paid to look after this. @@ -183,6 +184,7 @@ P: Len Brown M: len.brown@intel.com L: acpi-devel@lists.sourceforge.net W: http://acpi.sourceforge.net/ +T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git S: Maintained AD1816 SOUND DRIVER @@ -418,6 +420,7 @@ BLOCK LAYER P: Jens Axboe M: axboe@suse.de L: linux-kernel@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git S: Maintained BLUETOOTH SUBSYSTEM @@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported DRM DRIVERS P: David Airlie M: airlied@linux.ie L: dri-devel@lists.sourceforge.net +T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained DSCC4 DRIVER @@ -1113,6 +1118,7 @@ P: Jean Delvare M: khali@linux-fr.org L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.nu/ +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Maintained I2O @@ -1145,6 +1151,7 @@ P: Tony Luck M: tony.luck@intel.com L: linux-ia64@vger.kernel.org W: http://www.ia64-linux.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git S: Maintained SN-IA64 (Itanium) SUB-PLATFORM @@ -1212,6 +1219,7 @@ P: Jody McIntyre M: scjody@steamballoon.com L: linux1394-devel@lists.sourceforge.net W: http://www.linux1394.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git S: Maintained IEEE 1394 OHCI DRIVER @@ -1263,6 +1271,7 @@ P: Hal Rosenstock M: halr@voltaire.com L: openib-general@openib.org W: http://www.openib.org/ +T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git S: Supported INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS @@ -1436,6 +1445,7 @@ P: Kai Germaschewski M: kai@germaschewski.name P: Sam Ravnborg M: sam@ravnborg.org +T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git S: Maintained KERNEL JANITORS @@ -1782,6 +1792,7 @@ M: akpm@osdl.org P: Jeff Garzik M: jgarzik@pobox.com L: netdev@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git S: Maintained NETWORKING [GENERAL] @@ -1959,6 +1970,7 @@ P: Greg Kroah-Hartman M: gregkh@suse.de L: linux-kernel@vger.kernel.org L: linux-pci@atrey.karlin.mff.cuni.cz +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported PCI HOTPLUG CORE @@ -1980,6 +1992,7 @@ S: Maintained PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia +T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git S: Maintained PCNET32 NETWORK DRIVER @@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM P: James E.J. Bottomley M: James.Bottomley@SteelEye.com L: linux-scsi@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git S: Maintained SCSI TAPE DRIVER @@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM: P: Jeff Garzik M: jgarzik@pobox.com L: linux-ide@vger.kernel.org +T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git S: Supported SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER @@ -2749,6 +2764,7 @@ M: gregkh@suse.de L: linux-usb-users@lists.sourceforge.net L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org +T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ S: Supported USB UHCI DRIVER diff --git a/Makefile b/Makefile index c31914400953..e7a0443c867c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 15 -EXTRAVERSION =-rc1 +EXTRAVERSION =-rc2 NAME=Affluent Albatross # *DOCUMENTATION* diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 7c7f475e213e..6abafb6f1844 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -19,38 +19,28 @@ */ #ifdef DEBUG -#include - #if defined(CONFIG_DEBUG_ICEDCC) .macro loadsp, rb .endm - .macro writeb, ch, rb + .macro writeb, ch, rb mcr p14, 0, \ch, c0, c1, 0 .endm #else + +#include + .macro writeb, ch, rb senduart \ch, \rb .endm -#if defined(CONFIG_FOOTBRIDGE) || \ - defined(CONFIG_ARCH_RPC) || \ - defined(CONFIG_ARCH_INTEGRATOR) || \ - defined(CONFIG_ARCH_PXA) || \ - defined(CONFIG_ARCH_IXP4XX) || \ - defined(CONFIG_ARCH_IXP2000) || \ - defined(CONFIG_ARCH_LH7A40X) || \ - defined(CONFIG_ARCH_OMAP) - .macro loadsp, rb - addruart \rb - .endm -#elif defined(CONFIG_ARCH_SA1100) +#if defined(CONFIG_ARCH_SA1100) .macro loadsp, rb mov \rb, #0x80000000 @ physical base address -# if defined(CONFIG_DEBUG_LL_SER3) +#ifdef CONFIG_DEBUG_LL_SER3 add \rb, \rb, #0x00050000 @ Ser3 -# else +#else add \rb, \rb, #0x00010000 @ Ser1 -# endif +#endif .endm #elif defined(CONFIG_ARCH_IOP331) .macro loadsp, rb @@ -64,7 +54,9 @@ add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT .endm #else -#error no serial architecture defined + .macro loadsp, rb + addruart \rb + .endm #endif #endif #endif diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 39a6eea300a2..d0d6e6d2d649 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; +void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) +{ + unsigned int sz = SZ_1M >> PAGE_SHIFT; + + if (node != 0) + sz = 0; + + size[1] = size[0] - sz; + size[0] = sz; +} + /* * SA1111 interrupt support. Since clearing an IRQ while there are * active IRQs causes the interrupt output to pulse, the upper levels diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 756348bf5170..3f97590c91f2 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-git8 -# Thu Sep 8 19:24:02 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 17:41:24 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -61,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # System Type # @@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y # S3C2410 Boot # # CONFIG_S3C2410_BOOT_WATCHDOG is not set +# CONFIG_S3C2410_BOOT_ERROR_RESET is not set # # S3C2410 Setup @@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y # # Bus support # +CONFIG_ISA=y CONFIG_ISA_DMA_API=y # @@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_SMP is not set # CONFIG_PREEMPT is not set # CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set @@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_IMPA7 is not set CONFIG_MTD_BAST=y CONFIG_MTD_BAST_MAXSIZE=4 @@ -369,6 +392,11 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y # # Plug and Play support # +# CONFIG_PNP is not set # # Block devices # +# CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_IDE_GENERIC=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDE_BAST=y +# CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -466,6 +489,11 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + # # PHY device support # @@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -CONFIG_DM9000=m +CONFIG_DM9000=y +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -490,6 +528,7 @@ CONFIG_DM9000=m # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set +# CONFIG_ESPSERIAL is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set @@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250_FOURPORT is not set +# CONFIG_SERIAL_8250_ACCENT is not set +# CONFIG_SERIAL_8250_BOCA is not set +# CONFIG_SERIAL_8250_HUB6 is not set # # Non-8250 serial port support @@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set CONFIG_S3C2410_WATCHDOG=y + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_S3C2410_RTC=y @@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # +# CONFIG_I2C_ELEKTOR is not set CONFIG_I2C_ISA=m # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m # Graphics support # CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y # # Logo configuration @@ -772,6 +835,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -810,6 +873,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -884,6 +949,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set +CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set @@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_ERRORS is not set @@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0 # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 7a3261f0bf79..9997098009a9 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -120,7 +120,6 @@ EXPORT_SYMBOL(__arch_strncpy_from_user); EXPORT_SYMBOL(__get_user_1); EXPORT_SYMBOL(__get_user_2); EXPORT_SYMBOL(__get_user_4); -EXPORT_SYMBOL(__get_user_8); EXPORT_SYMBOL(__put_user_1); EXPORT_SYMBOL(__put_user_2); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 066597f4345a..f7f183075237 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -48,8 +48,7 @@ work_pending: mov r0, sp @ 'regs' mov r2, why @ 'syscall' bl do_notify_resume - disable_irq @ disable interrupts - b no_work_pending + b ret_slow_syscall @ Check work again work_resched: bl schedule diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index a917e3dd3666..765922bcf9e7 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -595,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, */ ret |= !valid_user_regs(regs); - /* - * Block the signal if we were unsuccessful. - */ if (ret != 0) { - spin_lock_irq(&tsk->sighand->siglock); - sigorsets(&tsk->blocked, &tsk->blocked, - &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(&tsk->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(&tsk->sighand->siglock); + force_sigsegv(sig, tsk); + return; } - if (ret == 0) - return; + /* + * Block the signal if we were successful. + */ + spin_lock_irq(&tsk->sighand->siglock); + sigorsets(&tsk->blocked, &tsk->blocked, + &ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(&tsk->blocked, sig); + recalc_sigpending(); + spin_unlock_irq(&tsk->sighand->siglock); - force_sigsegv(sig, tsk); } /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 80c8e4c8cefa..9a47770114d4 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -172,6 +172,10 @@ SECTIONS .comment 0 : { *(.comment) } } -/* those must never be empty */ +/* + * These must never be empty + * If you have to comment these two assert statements out, your + * binutils is too old (for other reasons as well) + */ ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support") ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined") diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index d204018070a4..c03ea8e666ba 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -54,15 +54,6 @@ __get_user_4: mov r0, #0 mov pc, lr - .global __get_user_8 -__get_user_8: -5: ldrt r2, [r0], #4 -6: ldrt r3, [r0] - mov r0, #0 - mov pc, lr - -__get_user_bad_8: - mov r3, #0 __get_user_bad: mov r2, #0 mov r0, #-EFAULT @@ -73,6 +64,4 @@ __get_user_bad: .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad - .long 5b, __get_user_bad_8 - .long 6b, __get_user_bad_8 .previous diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 698eb06545c4..6dbcaf114ad7 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index d83e8bad2038..c06e6041df41 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -26,8 +26,6 @@ #include #include -#define __io_address(n) __io(IO_ADDRESS(n)) - extern struct sys_timer realview_timer; #define AMBA_DEVICE(name,busid,base,plat) \ diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index 5e917e37d095..c9d7c596b200 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -21,8 +21,6 @@ #include #include -#include "core.h" - #define TWD_BASE(cpu) (__io_address(REALVIEW_TWD_BASE) + \ ((cpu) * REALVIEW_TWD_SIZE)) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 0c7d4ac9a7b3..a8fbd76d8be5 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -17,8 +17,7 @@ #include #include #include - -#include "core.h" +#include extern void realview_secondary_startup(void); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 1be2567a7486..4d962717fdf7 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = { .name = "pclk", .divisor = 1, .min_baud = 0, - .max_baud = 0. + .max_baud = 0, } }; @@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, [1] = { .hwport = 1, @@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), }, /* port 2 is not actually used */ [2] = { @@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = { .ulcon = ULCON, .ufcon = UFCON, .clocks = bast_serial_clocks, - .clocks_size = ARRAY_SIZE(bast_serial_clocks) + .clocks_size = ARRAY_SIZE(bast_serial_clocks), } }; @@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, - .offset = 0 + .offset = 0, }, [1] = { .name = "/boot", @@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = { .nr_chips = 1, .nr_map = smartmedia_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [1] = { .name = "chip0", .nr_chips = 1, .nr_map = chip0_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [2] = { .name = "chip1", .nr_chips = 1, .nr_map = chip1_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, }, [3] = { .name = "chip2", .nr_chips = 1, .nr_map = chip2_map, .nr_partitions = ARRAY_SIZE(bast_default_nand_part), - .partitions = bast_default_nand_part + .partitions = bast_default_nand_part, } }; @@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = { [0] = { .start = S3C2410_CS5 + BAST_PA_DM9000, .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [1] = { .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, - .flags = IORESOURCE_MEM + .flags = IORESOURCE_MEM, }, [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ, } }; @@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = { */ static struct dm9000_plat_data bast_dm9k_platdata = { - .flags = DM9000_PLATF_16BITONLY + .flags = DM9000_PLATF_16BITONLY, }; static struct platform_device bast_device_dm9k = { @@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = { .devices = bast_devices, .devices_count = ARRAY_SIZE(bast_devices), .clocks = bast_clocks, - .clocks_count = ARRAY_SIZE(bast_clocks) + .clocks_count = ARRAY_SIZE(bast_clocks), }; static void __init bast_map_io(void) diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 59f47d4c2dfe..ffe73ba2bf17 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -51,4 +51,4 @@ obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o -obj-$(CONFIG_CPU_V6) += proc-v6.o blockops.o +obj-$(CONFIG_CPU_V6) += proc-v6.o diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c deleted file mode 100644 index 4f5ee2d08996..000000000000 --- a/arch/arm/mm/blockops.c +++ /dev/null @@ -1,185 +0,0 @@ -#include -#include -#include -#include - -#include -#include -#include -#include - -extern struct cpu_cache_fns blk_cache_fns; - -#define HARVARD_CACHE - -/* - * blk_flush_kern_dcache_page(kaddr) - * - * Ensure that the data held in the page kaddr is written back - * to the page in question. - * - * - kaddr - kernel address (guaranteed to be page aligned) - */ -static void __attribute__((naked)) -blk_flush_kern_dcache_page(void *kaddr) -{ - asm( - "add r1, r0, %0 \n\ - sub r1, r1, %1 \n\ -1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c5, 0 \n\ - mcr p15, 0, r0, c7, c10, 4 \n\ - mov pc, lr" - : - : "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES)); -} - -/* - * blk_dma_inv_range(start,end) - * - * Invalidate the data cache within the specified region; we will - * be performing a DMA operation in this region and we want to - * purge old data in the cache. - * - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_inv_range_unified(unsigned long start, unsigned long end) -{ - asm( - "tst r0, %0 \n\ - mcrne p15, 0, r0, c7, c11, 1 @ clean unified line \n\ - tst r1, %0 \n\ - mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line\n\ - .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr" - : - : "I" (L1_CACHE_BYTES - 1)); -} - -static void __attribute__((naked)) -blk_dma_inv_range_harvard(unsigned long start, unsigned long end) -{ - asm( - "tst r0, %0 \n\ - mcrne p15, 0, r0, c7, c10, 1 @ clean D line \n\ - tst r1, %0 \n\ - mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line \n\ - .word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr" - : - : "I" (L1_CACHE_BYTES - 1)); -} - -/* - * blk_dma_clean_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_clean_range(unsigned long start, unsigned long end) -{ - asm( - ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0 @ blocking \n\ - mov r0, #0 \n\ - mcr p15, 0, r0, c7, c10, 4 @ drain write buffer \n\ - mov pc, lr"); -} - -/* - * blk_dma_flush_range(start,end) - * - start - virtual start address of region - * - end - virtual end address of region - */ -static void __attribute__((naked)) -blk_dma_flush_range(unsigned long start, unsigned long end) -{ - asm( - ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0 @ blocking \n\ - mov pc, lr"); -} - -static int blockops_trap(struct pt_regs *regs, unsigned int instr) -{ - regs->ARM_r4 |= regs->ARM_r2; - regs->ARM_pc += 4; - return 0; -} - -static char *func[] = { - "Prefetch data range", - "Clean+Invalidate data range", - "Clean data range", - "Invalidate data range", - "Invalidate instr range" -}; - -static struct undef_hook blockops_hook __initdata = { - .instr_mask = 0x0fffffd0, - .instr_val = 0x0c401f00, - .cpsr_mask = PSR_T_BIT, - .cpsr_val = 0, - .fn = blockops_trap, -}; - -static int __init blockops_check(void) -{ - register unsigned int err asm("r4") = 0; - unsigned int err_pos = 1; - unsigned int cache_type; - int i; - - asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_type)); - - printk("Checking V6 block cache operations:\n"); - register_undef_hook(&blockops_hook); - - __asm__ ("mov r0, %0\n\t" - "mov r1, %1\n\t" - "mov r2, #1\n\t" - ".word 0xec401f2c @ mcrr p15, 0, r1, r0, c12, 2\n\t" - "mov r2, #2\n\t" - ".word 0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0\n\t" - "mov r2, #4\n\t" - ".word 0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0\n\t" - "mov r2, #8\n\t" - ".word 0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0\n\t" - "mov r2, #16\n\t" - ".word 0xec401f05 @ mcrr p15, 0, r1, r0, c5, 0\n\t" - : - : "r" (PAGE_OFFSET), "r" (PAGE_OFFSET + 128) - : "r0", "r1", "r2"); - - unregister_undef_hook(&blockops_hook); - - for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1) - printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : ""); - - if ((err & 8) == 0) { - printk(" --> Using %s block cache invalidate\n", - cache_type & (1 << 24) ? "harvard" : "unified"); - if (cache_type & (1 << 24)) - cpu_cache.dma_inv_range = blk_dma_inv_range_harvard; - else - cpu_cache.dma_inv_range = blk_dma_inv_range_unified; - } - if ((err & 4) == 0) { - printk(" --> Using block cache clean\n"); - cpu_cache.dma_clean_range = blk_dma_clean_range; - } - if ((err & 2) == 0) { - printk(" --> Using block cache clean+invalidate\n"); - cpu_cache.dma_flush_range = blk_dma_flush_range; - cpu_cache.flush_kern_dcache_page = blk_flush_kern_dcache_page; - } - - return 0; -} - -__initcall(blockops_check); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c168f322ef8c..8b276ee38acf 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -420,7 +420,8 @@ static void __init bootmem_init(struct meminfo *mi) * Set up device the mappings. Since we clear out the page tables for all * mappings above VMALLOC_END, we will remove any debug device mappings. * This means you have to be careful how you debug this function, or any - * called function. (Do it by code inspection!) + * called function. This means you can't use any function or debugging + * method which may touch any device, otherwise the kernel _will_ crash. */ static void __init devicemaps_init(struct machine_desc *mdesc) { @@ -428,6 +429,12 @@ static void __init devicemaps_init(struct machine_desc *mdesc) unsigned long addr; void *vectors; + /* + * Allocate the vector page early. + */ + vectors = alloc_bootmem_low_pages(PAGE_SIZE); + BUG_ON(!vectors); + for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); @@ -461,12 +468,6 @@ static void __init devicemaps_init(struct machine_desc *mdesc) create_mapping(&map); #endif - flush_cache_all(); - local_flush_tlb_all(); - - vectors = alloc_bootmem_low_pages(PAGE_SIZE); - BUG_ON(!vectors); - /* * Create a mapping for the machine vectors at the high-vectors * location (0xffff0000). If we aren't using high-vectors, also @@ -491,12 +492,13 @@ static void __init devicemaps_init(struct machine_desc *mdesc) mdesc->map_io(); /* - * Finally flush the tlb again - this ensures that we're in a - * consistent state wrt the writebuffer if the writebuffer needs - * draining. After this point, we can start to touch devices - * again. + * Finally flush the caches and tlb to ensure that we're in a + * consistent state wrt the writebuffer. This also ensures that + * any write-allocated cache lines in the vector page are written + * back. After this point, we can start to touch devices again. */ local_flush_tlb_all(); + flush_cache_all(); } /* diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 0f128c28fee4..10901398e4a2 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -130,8 +130,7 @@ remap_area_pages(unsigned long start, unsigned long phys_addr, * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. */ void __iomem * -__ioremap(unsigned long phys_addr, size_t size, unsigned long flags, - unsigned long align) +__ioremap(unsigned long phys_addr, size_t size, unsigned long flags) { void * addr; struct vm_struct * area; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index a1468d7326eb..38d7ebf87920 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -26,7 +26,7 @@ */ #include -#include +#include #include #include #include diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c index 2ede2ee8cae4..b86148227480 100644 --- a/arch/arm/plat-omap/ocpi.c +++ b/arch/arm/plat-omap/ocpi.c @@ -34,7 +34,7 @@ #include #include -#include +#include #define OCPI_BASE 0xfffec320 #define OCPI_FAULT (OCPI_BASE + 0x00) diff --git a/arch/arm/plat-omap/pm.c b/arch/arm/plat-omap/pm.c index 966cca031ca7..1a24e2c10714 100644 --- a/arch/arm/plat-omap/pm.c +++ b/arch/arm/plat-omap/pm.c @@ -509,7 +509,7 @@ static void omap_pm_init_proc(void) * @state: suspend state we're entering. * */ -//#include +//#include static int omap_pm_prepare(suspend_state_t state) { diff --git a/arch/arm/plat-omap/sram-fn.S b/arch/arm/plat-omap/sram-fn.S index 4bea36964a00..66414cc8e6e3 100644 --- a/arch/arm/plat-omap/sram-fn.S +++ b/arch/arm/plat-omap/sram-fn.S @@ -12,7 +12,7 @@ #include #include #include -#include +#include .text diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index e06f21f60dc5..301f2e9d262e 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -91,16 +91,17 @@ ENTRY(vhpt_miss) * (the "original") TLB miss, which may either be caused by an instruction * fetch or a data access (or non-access). * - * What we do here is normal TLB miss handing for the _original_ miss, followed - * by inserting the TLB entry for the virtual page table page that the VHPT - * walker was attempting to access. The latter gets inserted as long - * as both L1 and L2 have valid mappings for the faulting address. - * The TLB entry for the original miss gets inserted only if - * the L3 entry indicates that the page is present. + * What we do here is normal TLB miss handing for the _original_ miss, + * followed by inserting the TLB entry for the virtual page table page + * that the VHPT walker was attempting to access. The latter gets + * inserted as long as page table entry above pte level have valid + * mappings for the faulting address. The TLB entry for the original + * miss gets inserted only if the pte entry indicates that the page is + * present. * * do_page_fault gets invoked in the following cases: * - the faulting virtual address uses unimplemented address bits - * - the faulting virtual address has no L1, L2, or L3 mapping + * - the faulting virtual address has no valid page table mapping */ mov r16=cr.ifa // get address that caused the TLB miss #ifdef CONFIG_HUGETLB_PAGE @@ -126,7 +127,7 @@ ENTRY(vhpt_miss) #endif ;; cmp.eq p6,p7=5,r17 // is IFA pointing into to region 5? - shr.u r18=r22,PGDIR_SHIFT // get bits 33-63 of the faulting address + shr.u r18=r22,PGDIR_SHIFT // get bottom portion of pgd index bit ;; (p7) dep r17=r17,r19,(PAGE_SHIFT-3),3 // put region number bits in place @@ -137,38 +138,38 @@ ENTRY(vhpt_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r28=r22,PUD_SHIFT // shift L2 index into position + shr.u r28=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? #ifdef CONFIG_PGTABLE_4 - dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + dep r28=r28,r17,3,(PAGE_SHIFT-3) // r28=pud_offset(pgd,addr) ;; - shr.u r18=r22,PMD_SHIFT // shift L3 index into position -(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position +(p7) ld8 r29=[r28] // get *pud (may be 0) ;; -(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL? - dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r29,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) #else - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pgd,addr) #endif ;; -(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r20=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL? - dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was pmd_present(*pmd) == NULL? + dep r21=r19,r20,3,(PAGE_SHIFT-3) // r21=pte_offset(pmd,addr) ;; -(p7) ld8 r18=[r21] // read the L4 PTE - mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss +(p7) ld8 r18=[r21] // read *pte + mov r19=cr.isr // cr.isr bit 32 tells us if this is an insn miss ;; (p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared? mov r22=cr.iha // get the VHPT address that caused the TLB miss @@ -202,25 +203,33 @@ ENTRY(vhpt_miss) dv_serialize_data /* - * Re-check L2 and L3 pagetable. If they changed, we may have received a ptc.g + * Re-check pagetable entry. If they changed, we may have received a ptc.g * between reading the pagetable and the "itc". If so, flush the entry we - * inserted and retry. + * inserted and retry. At this point, we have: + * + * r28 = equivalent of pud_offset(pgd, ifa) + * r17 = equivalent of pmd_offset(pud, ifa) + * r21 = equivalent of pte_offset(pmd, ifa) + * + * r29 = *pud + * r20 = *pmd + * r18 = *pte */ - ld8 r25=[r21] // read L4 entry again - ld8 r26=[r17] // read L3 PTE again + ld8 r25=[r21] // read *pte again + ld8 r26=[r17] // read *pmd again #ifdef CONFIG_PGTABLE_4 - ld8 r18=[r28] // read L2 entry again + ld8 r19=[r28] // read *pud again #endif cmp.ne p6,p7=r0,r0 ;; - cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change + cmp.ne.or.andcm p6,p7=r26,r20 // did *pmd change #ifdef CONFIG_PGTABLE_4 - cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change + cmp.ne.or.andcm p6,p7=r19,r29 // did *pud change #endif mov r27=PAGE_SHIFT<<2 ;; (p6) ptc.l r22,r27 // purge PTE page translation -(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change +(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did *pte change ;; (p6) ptc.l r16,r27 // purge translation #endif @@ -235,19 +244,19 @@ END(vhpt_miss) ENTRY(itlb_miss) DBG_FAULT(1) /* - * The ITLB handler accesses the L3 PTE via the virtually mapped linear + * The ITLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates .itlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -262,7 +271,7 @@ ENTRY(itlb_miss) */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -279,19 +288,19 @@ END(itlb_miss) ENTRY(dtlb_miss) DBG_FAULT(2) /* - * The DTLB handler accesses the L3 PTE via the virtually mapped linear + * The DTLB handler accesses the PTE via the virtually mapped linear * page table. If a nested TLB miss occurs, we switch into physical - * mode, walk the page table, and then re-execute the L3 PTE read - * and go on normally after that. + * mode, walk the page table, and then re-execute the PTE read and + * go on normally after that. */ mov r16=cr.ifa // get virtual address mov r29=b0 // save b0 mov r31=pr // save predicates dtlb_fault: - mov r17=cr.iha // get virtual address of L3 PTE + mov r17=cr.iha // get virtual address of PTE movl r30=1f // load nested fault continuation point ;; -1: ld8 r18=[r17] // read L3 PTE +1: ld8 r18=[r17] // read *pte ;; mov b0=r29 tbit.z p6,p0=r18,_PAGE_P_BIT // page present bit cleared? @@ -306,7 +315,7 @@ dtlb_fault: */ dv_serialize_data - ld8 r19=[r17] // read L3 PTE again and see if same + ld8 r19=[r17] // read *pte again and see if same mov r20=PAGE_SHIFT<<2 // setup page size for purge ;; cmp.ne p7,p0=r18,r19 @@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss) * r30: continuation address * r31: saved pr * - * Output: r17: physical address of L3 PTE of faulting address + * Output: r17: physical address of PTE of faulting address * r29: saved b0 * r30: continuation address * r31: saved pr @@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss) (p6) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT (p7) shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3 ;; -(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 -(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) +(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=pgd_offset for region 5 +(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=pgd_offset for region[0-4] cmp.eq p7,p6=0,r21 // unused address bits all zeroes? #ifdef CONFIG_PGTABLE_4 - shr.u r18=r22,PUD_SHIFT // shift L2 index into position + shr.u r18=r22,PUD_SHIFT // shift pud index into position #else - shr.u r18=r22,PMD_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift pmd index into position #endif ;; - ld8 r17=[r17] // fetch the L1 entry (may be 0) + ld8 r17=[r17] // get *pgd (may be 0) ;; -(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq p6,p7=r17,r0 // was pgd_present(*pgd) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=p[u|m]d_offset(pgd,addr) ;; #ifdef CONFIG_PGTABLE_4 -(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r18=r22,PMD_SHIFT // shift L3 index into position +(p7) ld8 r17=[r17] // get *pud (may be 0) + shr.u r18=r22,PMD_SHIFT // shift pmd index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pud_present(*pud) == NULL? + dep r17=r18,r17,3,(PAGE_SHIFT-3) // r17=pmd_offset(pud,addr) ;; #endif -(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L4 index into position +(p7) ld8 r17=[r17] // get *pmd (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift pte index into position ;; -(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL? - dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was pmd_present(*pmd) == NULL? + dep r17=r19,r17,3,(PAGE_SHIFT-3) // r17=pte_offset(pmd,addr); (p6) br.cond.spnt page_fault mov b0=r30 br.sptk.many b0 // return to continuation point diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 02692027730a..e14ba5e01a36 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -700,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI) += 0xffffffff80600000 # core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ arch/mips/jmr3927/common/ +cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 4f21f42d096b..08c8c855cc9c 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -93,7 +93,7 @@ void __init plat_setup(void) argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_AU1X00_CONSOLE +#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) if ((argptr = strstr(argptr, "console=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " console=ttyS0,115200"); diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig index 132ec3dac63f..74990758154b 100644 --- a/arch/mips/configs/atlas_defconfig +++ b/arch/mips/configs/atlas_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:13 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:14:02 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -191,6 +209,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -309,6 +328,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -363,6 +386,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -412,6 +436,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -472,10 +497,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -488,8 +521,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -498,13 +533,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -565,18 +601,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -643,6 +670,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -653,6 +681,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -707,6 +736,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -736,7 +766,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -754,6 +783,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -933,6 +963,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -991,6 +1022,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -1037,7 +1072,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 25e8a08e68be..ea4b75604c23 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:36 2005 # CONFIG_MIPS=y @@ -60,6 +60,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -127,8 +144,8 @@ CONFIG_SIBYTE_SB1xxx_SOC=y # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -198,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -353,14 +375,6 @@ CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -443,6 +457,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -582,6 +597,7 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,6 +650,7 @@ CONFIG_SENSORS_PCA9539=y CONFIG_SENSORS_PCF8591=y CONFIG_SENSORS_RTC8564=y CONFIG_SENSORS_MAX6875=y +# CONFIG_RTC_X1205_I2C is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y @@ -685,6 +702,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -823,6 +844,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index bfbaa08c47cb..a86cc9d9bdae 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:20 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:39 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -329,16 +352,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -412,7 +426,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +443,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -586,6 +600,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -601,6 +616,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -659,6 +675,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 4b4d1ddb3d42..3558c79b0eb7 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:23 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:04:42 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -172,6 +190,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -316,18 +340,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -401,7 +416,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -419,6 +433,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -574,6 +589,7 @@ CONFIG_COBALT_LCD=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -632,6 +648,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 6501144ec612..3b103fec7b86 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:26 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:04 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -201,7 +220,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -259,15 +277,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -293,6 +315,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -343,6 +369,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -399,6 +426,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -417,18 +449,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -473,7 +496,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -490,6 +512,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -532,6 +555,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -598,13 +622,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -633,11 +661,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -696,6 +727,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index b8cd2cd923dd..79cdd940c6a8 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:29 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:07 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -247,15 +266,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -281,6 +304,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -331,6 +358,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -387,6 +415,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -405,18 +438,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -461,7 +485,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -478,6 +501,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -507,6 +531,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -573,13 +598,16 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -608,6 +636,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -650,12 +679,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1100=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1100=y # CONFIG_FB_VIRTUAL is not set # @@ -664,6 +692,7 @@ CONFIG_FB_AU1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -697,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 530b6c2d99f6..b6bad69398e1 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:32 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:10 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -200,7 +219,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -255,13 +273,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -287,6 +309,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -333,6 +359,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -394,6 +421,11 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -414,16 +446,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -495,6 +518,7 @@ CONFIG_SCSI_MULTI_LUN=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -545,6 +569,7 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -638,13 +663,17 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y @@ -673,11 +702,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -720,12 +752,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_AU1200=y # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1200=y # CONFIG_FB_VIRTUAL is not set # @@ -756,6 +787,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -862,6 +897,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 1c2784dee697..dbaf189fc9c0 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:36 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:15 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -208,7 +227,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -432,18 +464,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -518,7 +541,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -537,7 +559,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -599,6 +623,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -664,13 +689,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -702,12 +731,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -756,12 +788,94 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA MIPS devices +# +CONFIG_SND_AU1X00=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# PCMCIA devices +# # # Open Sound System # CONFIG_SOUND_PRIME=y +CONFIG_OBSOLETE_OSS_DRIVER=y # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set @@ -774,7 +888,7 @@ CONFIG_SOUND_PRIME=y # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set -CONFIG_SOUND_AU1000=y +# CONFIG_SOUND_AU1000 is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set @@ -815,12 +929,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # USB Device Class drivers # # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 64248e2e924a..59c1ef214fc0 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:39 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:11:18 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_AU1X00=m # @@ -266,15 +284,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -300,6 +322,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -350,6 +376,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -412,6 +439,11 @@ CONFIG_MTD_NAND_AU1550=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -435,18 +467,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -550,7 +573,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -569,7 +591,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -639,6 +663,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -704,13 +729,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -742,12 +771,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -800,6 +832,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig index 326f3aa63741..4ba29e612bdf 100644 --- a/arch/mips/configs/ddb5476_defconfig +++ b/arch/mips/configs/ddb5476_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:42 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:04 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -261,6 +280,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -292,6 +315,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -321,18 +345,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -412,7 +427,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -430,6 +444,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -443,7 +458,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -591,6 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,7 +648,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -642,6 +656,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -658,7 +673,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -687,6 +701,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig index c2a01df3c8df..ea4e9046bbee 100644 --- a/arch/mips/configs/ddb5477_defconfig +++ b/arch/mips/configs/ddb5477_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:45 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:08 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -260,6 +279,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -291,6 +314,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -382,7 +397,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +414,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -575,6 +590,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -633,6 +649,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 5bc885b72d14..1ac6c9b7ef96 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:48 2005 +# Linux kernel version: 2.6.14 +# Fri Nov 11 13:29:30 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -318,16 +341,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -365,12 +379,13 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SCSI_DECNCR=y # CONFIG_SCSI_DECSII is not set # CONFIG_SCSI_SATA is not set @@ -407,7 +422,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -491,10 +505,7 @@ CONFIG_ZS=y # # Non-8250 serial port support # -CONFIG_SERIAL_DZ=y -CONFIG_SERIAL_DZ_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_DZ is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -520,6 +531,7 @@ CONFIG_RTC=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -562,15 +574,14 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PMAG_AA is not set CONFIG_FB_PMAG_BA=y CONFIG_FB_PMAGB_B=y # CONFIG_FB_MAXINE is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -594,6 +605,10 @@ CONFIG_LOGO_DEC_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -746,6 +761,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index c0d06ea5566c..a89d2f66cdfa 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:51 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:15 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,16 +340,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -403,7 +417,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,7 +440,6 @@ CONFIG_NET_ETHERNET=y # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -552,6 +564,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -564,6 +577,7 @@ CONFIG_GPIO_VR41XX=y # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -622,6 +636,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig index f1309d84d2fe..e6c3c27f41fe 100644 --- a/arch/mips/configs/ev64120_defconfig +++ b/arch/mips/configs/ev64120_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:54 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:05:12 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -326,18 +349,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -389,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -407,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -464,6 +478,7 @@ CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set # CONFIG_PPP_DEFLATE is not set # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -569,6 +584,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -627,6 +643,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig index 8ac55b7acc01..52ca6bf5be66 100644 --- a/arch/mips/configs/ev96100_defconfig +++ b/arch/mips/configs/ev96100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:57 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:22 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_KMOD is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -185,6 +203,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -269,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -323,18 +346,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -379,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -518,6 +531,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -575,6 +589,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 3ae3838f283c..79e3fe7e2d54 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:01 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:38:41 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index d962f61d5b98..72998ec35b0b 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:04 2005 +# Linux kernel version: 2.6.15-rc1 +# Sun Nov 13 23:56:52 2005 # CONFIG_MIPS=y @@ -59,6 +59,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -186,6 +203,7 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=64 CONFIG_PREEMPT_NONE=y @@ -284,10 +302,18 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -300,8 +326,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -310,12 +338,13 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -377,14 +406,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -428,6 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -437,6 +459,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -447,7 +470,6 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y -CONFIG_SCSI_QLOGIC_1280_1040=y CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set @@ -487,6 +509,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -516,7 +539,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -532,8 +554,12 @@ CONFIG_CICADA_PHY=m # CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SGI_IOC3_ETH=y +CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y +CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -672,6 +698,7 @@ CONFIG_SGI_IP27_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -724,6 +751,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -762,7 +793,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index bf8fb95b21dc..955e30f1b1ad 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:32 2005 # CONFIG_MIPS=y @@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -271,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -302,6 +324,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -334,14 +357,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -385,6 +400,7 @@ CONFIG_SCSI_SAS_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -399,6 +415,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_AIC79XX is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -432,6 +449,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -461,7 +479,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -480,6 +497,7 @@ CONFIG_NET_ETHERNET=y CONFIG_SGI_O2MACE_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -637,6 +655,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -695,6 +714,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig index 0940771bafb1..f631385217db 100644 --- a/arch/mips/configs/it8172_defconfig +++ b/arch/mips/configs/it8172_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:45 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -266,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -315,6 +338,7 @@ CONFIG_MTD_CHAR=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -372,6 +396,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -390,18 +419,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -467,7 +487,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -609,6 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -669,10 +689,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y +# CONFIG_OBSOLETE_OSS_DRIVER is not set CONFIG_SOUND_IT8172=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_AD1980 is not set # # USB support @@ -680,6 +700,10 @@ CONFIG_SOUND_IT8172=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig index 9ba61dfc490d..8d94ac753e78 100644 --- a/arch/mips/configs/ivr_defconfig +++ b/arch/mips/configs/ivr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:12 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:38 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -324,18 +347,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -409,7 +423,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -427,6 +440,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -539,7 +553,8 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_QTRONIX_KEYBOARD=y -# CONFIG_IT8172_SCR0 is not set +CONFIG_IT8172_SCR0=y +CONFIG_IT8172_SCR1=y # # Serial drivers @@ -583,6 +598,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -641,6 +657,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig index 21b2b8042f91..a8b4c9a9a63b 100644 --- a/arch/mips/configs/jaguar-atx_defconfig +++ b/arch/mips/configs/jaguar-atx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:14 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:41 2005 # CONFIG_MIPS=y @@ -54,6 +54,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -259,6 +278,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,18 +340,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -380,7 +394,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -398,6 +411,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -591,6 +605,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 6390a753e80b..c0ac5c793ec7 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:17 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:44 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -168,6 +186,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -315,18 +339,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -378,7 +393,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -396,6 +410,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -561,6 +576,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -603,7 +619,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -612,6 +627,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -628,7 +644,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -656,6 +671,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig index 03cd0ca6e639..f2bd620ff0fa 100644 --- a/arch/mips/configs/lasat200_defconfig +++ b/arch/mips/configs/lasat200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:19 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:47 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -317,6 +340,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -374,6 +398,11 @@ CONFIG_MTD_LASAT=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -396,18 +425,9 @@ CONFIG_MTD_LASAT=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -511,7 +531,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -529,6 +548,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -684,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -742,6 +763,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 2acdec959dd0..e48e1de442b4 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:22 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 13:42:55 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -197,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -315,6 +334,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -369,6 +392,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -418,6 +442,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -478,10 +503,18 @@ CONFIG_IPDDP_DECAP=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -494,8 +527,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -504,13 +539,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -CONFIG_NET_CLS_IND=y # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +CONFIG_NET_CLS_IND=y +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -572,18 +608,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -680,6 +707,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -695,6 +723,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -745,6 +774,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -774,7 +804,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -792,6 +821,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -967,6 +997,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1025,6 +1056,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -1071,7 +1106,7 @@ CONFIG_JFS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index fb9bdd9e3151..04abd1b3202b 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:25 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:05:55 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -281,10 +300,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -297,8 +324,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -311,6 +340,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_POLICE is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -361,16 +391,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -537,6 +558,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -588,6 +610,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -721,6 +747,8 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index e2c082128532..46814be0ac38 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:28 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:01 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -210,7 +229,6 @@ CONFIG_PCMCIA_IOCTL=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_TCIC is not set CONFIG_PCMCIA_VRC4173=y # @@ -281,6 +299,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,16 +363,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -612,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -625,6 +639,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set @@ -632,6 +648,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -713,12 +730,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig index f18d05c2ca77..e12118c30db4 100644 --- a/arch/mips/configs/ocelot_3_defconfig +++ b/arch/mips/configs/ocelot_3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:30 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:01:36 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_SMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -365,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -411,12 +429,13 @@ CONFIG_SCSI_PROC_FS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -427,6 +446,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -461,6 +481,7 @@ CONFIG_SCSI_QLA2XXX=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -490,7 +511,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -508,6 +528,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -589,6 +610,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -691,6 +713,7 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,7 +756,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set @@ -742,6 +764,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -758,7 +781,6 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -767,6 +789,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -792,6 +815,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig index d3a5fee02b79..99f0c980aee7 100644 --- a/arch/mips/configs/ocelot_c_defconfig +++ b/arch/mips/configs/ocelot_c_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:33 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:05 2005 # CONFIG_MIPS=y @@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -176,6 +193,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -267,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -298,6 +320,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -329,14 +352,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -388,7 +403,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -406,6 +420,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -562,6 +577,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -620,6 +636,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig index 1edde12ebff9..11c7d74ee1e5 100644 --- a/arch/mips/configs/ocelot_defconfig +++ b/arch/mips/configs/ocelot_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:35 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:08 2005 # CONFIG_MIPS=y @@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -296,6 +319,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -375,7 +390,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -513,6 +527,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -570,6 +585,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig index e2d5188cdc15..9ced1a9029d4 100644 --- a/arch/mips/configs/ocelot_g_defconfig +++ b/arch/mips/configs/ocelot_g_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:38 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:11 2005 # CONFIG_MIPS=y @@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -270,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -301,6 +323,7 @@ CONFIG_FW_LOADER=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -332,14 +355,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=y # @@ -391,7 +406,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -410,6 +424,7 @@ CONFIG_MII=y CONFIG_GALILEO_64240_ETH=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -565,6 +580,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -623,6 +639,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 47247addee1b..dbcaa77add7c 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:41 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:12:31 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -203,7 +222,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set # @@ -261,15 +279,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -295,6 +317,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -345,6 +371,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -401,6 +428,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -419,18 +451,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -475,7 +498,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -492,6 +514,7 @@ CONFIG_CICADA_PHY=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SMC91X is not set # # Ethernet (1000 Mbit) @@ -526,6 +549,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -592,12 +616,19 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # # CONFIG_SERIAL_AU1X00 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -624,11 +655,14 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -687,6 +721,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index f91a4eaae51a..5b685ceb6fde 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:44 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:14:25 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_MII=m CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -635,6 +659,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -700,13 +725,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -738,12 +767,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -796,6 +828,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index bbad27cb40a2..f8f32e99f72d 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:47 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:15:34 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -207,7 +226,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set CONFIG_PD6729=m # CONFIG_I82092 is not set -# CONFIG_TCIC is not set # CONFIG_PCMCIA_AU1X00 is not set CONFIG_PCCARD_NONSTATIC=m @@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -565,7 +587,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set # # Tulip family network device support @@ -627,6 +651,7 @@ CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -692,13 +717,17 @@ CONFIG_SERIO_RAW=m # # Serial drivers # -# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # -CONFIG_SERIAL_AU1X00=y -CONFIG_SERIAL_AU1X00_CONSOLE=y +# CONFIG_SERIAL_AU1X00 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -730,12 +759,15 @@ CONFIG_LEGACY_PTY_COUNT=256 # PCMCIA character devices # CONFIG_SYNCLINK_CS=m +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -788,6 +820,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 555837e4c06f..5820e5f2295e 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:50 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:25 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -325,16 +348,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -423,12 +437,13 @@ CONFIG_SCSI_CONSTANTS=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -439,6 +454,7 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -473,6 +489,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -510,6 +527,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -681,6 +699,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -763,12 +782,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1039,6 +1061,8 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set @@ -1055,7 +1079,31 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1067,4 +1115,4 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index 37bd8d5c865d..a4ebb538e15c 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:53 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:38 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -255,13 +274,17 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -293,6 +316,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -352,16 +379,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -451,12 +469,13 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -472,6 +491,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -506,6 +526,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -543,6 +564,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -622,6 +644,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -746,6 +769,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -796,6 +820,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -872,7 +897,6 @@ CONFIG_FB=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -881,6 +905,7 @@ CONFIG_FB=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -897,7 +922,6 @@ CONFIG_FB=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -946,12 +970,15 @@ CONFIG_USB_DEVICEFS=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1235,7 +1262,31 @@ CONFIG_CMDLINE="" # # Cryptographic options # -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices @@ -1247,6 +1298,6 @@ CONFIG_CMDLINE="" CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig index 741a9a971367..5d39162077f4 100644 --- a/arch/mips/configs/qemu_defconfig +++ b/arch/mips/configs/qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:56 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:31 2005 # CONFIG_MIPS=y @@ -49,6 +49,24 @@ CONFIG_BASE_SMALL=1 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + # # Machine selection # @@ -168,6 +186,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -234,6 +253,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -265,6 +288,7 @@ CONFIG_STANDALONE=y # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) @@ -289,16 +313,7 @@ CONFIG_CONNECTOR=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set # CONFIG_ATA_OVER_ETH is not set # @@ -353,7 +368,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=y -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -385,7 +399,6 @@ CONFIG_NET_ISA=y # CONFIG_ETH16I is not set CONFIG_NE2000=y # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -557,6 +570,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 897420d39053..047e0b4236f8 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:26:59 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:45 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -188,6 +206,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -265,15 +284,19 @@ CONFIG_IPV6=m # CONFIG_IPV6_TUNNEL is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -CONFIG_IP_NF_PPTP=m # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -355,6 +382,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -411,6 +439,11 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_NAND is not set +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + # # Parallel port support # @@ -438,16 +471,7 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -556,7 +580,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -574,6 +597,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -619,7 +643,6 @@ CONFIG_NET_PCI=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_LAN_SAA9730 is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -668,7 +691,6 @@ CONFIG_NET_RADIO=y # CONFIG_IPW2100 is not set # CONFIG_IPW_DEBUG is not set CONFIG_IPW2200=m -# CONFIG_AIRO is not set # CONFIG_HERMES is not set # CONFIG_ATMEL is not set @@ -692,6 +714,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m # CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -804,6 +827,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -847,7 +871,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set @@ -856,6 +879,7 @@ CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set @@ -876,7 +900,6 @@ CONFIG_FB_ATY_CT=y # CONFIG_FB_SMIVGX is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -926,12 +949,15 @@ CONFIG_USB=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -1106,6 +1132,7 @@ CONFIG_RELAYFS_FS=m CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 988a05824f01..55458062352e 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:03 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 14:02:50 2005 # CONFIG_MIPS=y @@ -58,6 +58,24 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -190,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -272,6 +291,10 @@ CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -325,6 +348,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -374,6 +398,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -430,10 +455,18 @@ CONFIG_DECNET=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y CONFIG_NET_SCH_CLK_JIFFIES=y # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -446,8 +479,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -456,13 +491,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -583,18 +619,9 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -638,6 +665,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -651,6 +679,7 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_MEGARAID_NEWGEN=y CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set @@ -723,6 +752,7 @@ CONFIG_DM_MULTIPATH_EMC=m # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -752,7 +782,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -770,6 +799,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set @@ -984,6 +1014,7 @@ CONFIG_RTC=m # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -1074,12 +1105,15 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -CONFIG_USB_BLUETOOTH_TTY=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1196,6 +1230,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_HP4X=m CONFIG_USB_SERIAL_SAFE=m @@ -1271,7 +1306,7 @@ CONFIG_REISERFS_FS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 4365d9c8c42e..dc453a1e4806 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:05 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:43 2005 # CONFIG_MIPS=y @@ -58,6 +58,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -126,8 +143,8 @@ CONFIG_CPU_SB1_PASS_1=y # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y # CONFIG_SIMULATION is not set -# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set -# CONFIG_CONFIG_SB1_CERR_STALL is not set +# CONFIG_SB1_CEX_ALWAYS_FATAL is not set +# CONFIG_SB1_CERR_STALL is not set CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set @@ -200,6 +217,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -359,14 +381,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -441,7 +455,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -459,6 +472,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -599,6 +613,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -651,6 +666,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index d835f6db1f41..aa27d583162d 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:07 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:45 2005 # CONFIG_MIPS=y @@ -47,6 +47,24 @@ CONFIG_BASE_SMALL=0 # # CONFIG_MODULES is not set +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -242,17 +261,8 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=18432 CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y - # # ATA/ATAPI/MFM/RLL support # @@ -353,6 +363,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -403,6 +414,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index bf60a17de2b0..ddc7e45996f2 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:10 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:49 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -277,6 +296,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -339,16 +362,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -385,12 +399,13 @@ CONFIG_SCSI_MULTI_LUN=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -401,6 +416,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -435,6 +451,7 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -464,7 +481,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -482,6 +498,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -634,6 +651,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -650,6 +668,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -733,12 +752,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig index ac8b64e87b8a..e8c82f011e98 100644 --- a/arch/mips/configs/tb0229_defconfig +++ b/arch/mips/configs/tb0229_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:13 2005 +# Linux kernel version: 2.6.14 +# Wed Nov 9 11:11:47 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -278,6 +297,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -341,18 +364,9 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -404,7 +418,6 @@ CONFIG_DUMMY=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -422,6 +435,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -504,6 +518,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y @@ -589,6 +604,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -605,6 +621,7 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -688,12 +705,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index ab13621ef3b9..125b2997abfe 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:16 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 11:17:02 2005 # CONFIG_MIPS=y @@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -273,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -328,16 +351,7 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -415,7 +429,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -439,7 +452,6 @@ CONFIG_MII=m # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -577,6 +589,7 @@ CONFIG_WATCHDOG=y # CONFIG_WDT is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_RTC_VR41XX is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -588,12 +601,15 @@ CONFIG_WATCHDOG=y # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set # CONFIG_GPIO_VR41XX is not set # CONFIG_RAW_DRIVER is not set # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -652,6 +668,10 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 5b0b7f30e205..d90790b2ab30 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:27:18 2005 +# Linux kernel version: 2.6.14 +# Mon Nov 7 23:06:59 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -181,6 +199,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT_NONE=y @@ -260,6 +279,10 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -319,18 +342,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -382,7 +396,6 @@ CONFIG_NETDEVICES=y # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -400,6 +413,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # @@ -575,6 +589,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -690,6 +708,8 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/mips/ddb5xxx/ddb5477/lcd44780.c b/arch/mips/ddb5xxx/ddb5477/lcd44780.c index 35c6c22610c5..9510b9ae6453 100644 --- a/arch/mips/ddb5xxx/ddb5477/lcd44780.c +++ b/arch/mips/ddb5xxx/ddb5477/lcd44780.c @@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c) void lcd44780_puts(const char* s) { - int i,j; + int j; int pos = 0; lcd44780_command(LCD44780_CLEAR); @@ -76,8 +76,12 @@ void lcd44780_puts(const char* s) } } #ifdef LCD44780_PUTS_PAUSE - for(i = 1; i < 2000; i++) - lcd44780_wait(); + { + int i; + + for(i = 1; i < 2000; i++) + lcd44780_wait(); + } #endif } diff --git a/arch/mips/defconfig b/arch/mips/defconfig index 4b585e642c2a..e9086da02e48 100644 --- a/arch/mips/defconfig +++ b/arch/mips/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc2 -# Thu Oct 20 22:25:09 2005 +# Linux kernel version: 2.6.14 +# Thu Nov 10 12:13:58 2005 # CONFIG_MIPS=y @@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Machine selection # @@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_NFQUEUE=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_IP6_NF_TARGET_HL=m @@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_NET_DIVERT=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# CONFIG_NET_SCHED=y # CONFIG_NET_SCH_CLK_JIFFIES is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m @@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_QOS=y -CONFIG_NET_ESTIMATOR=y + +# +# Classification +# CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m @@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m # CONFIG_CLS_U32_PERF is not set -# CONFIG_NET_CLS_IND is not set # CONFIG_CLS_U32_MARK is not set CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y # # Network testing @@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_LBD is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y CONFIG_ATA_OVER_ETH=m # @@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m # # SCSI low-level drivers # +CONFIG_ISCSI_TCP=m CONFIG_SGIWD93_SCSI=y # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set @@ -599,7 +627,6 @@ CONFIG_TUN=m # PHY device support # CONFIG_PHYLIB=m -CONFIG_PHYCONTROL=y # # MII PHY device drivers @@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # # TPM devices # +# CONFIG_TELCLOCK is not set # # I2C support @@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m CONFIG_XFS_EXPORT=y -CONFIG_XFS_QUOTA=m +CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c index 8b407d7dc460..9a8bff153d80 100644 --- a/arch/mips/jmr3927/common/rtc_ds1742.c +++ b/arch/mips/jmr3927/common/rtc_ds1742.c @@ -41,11 +41,11 @@ #include #include #include +#include #include #include -#include #include #define EPOCH 2000 diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 3e2fbdc66097..55ad0a578794 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -357,7 +357,7 @@ static void __init jmr3927_board_init(void) jmr3927_io_dipsw()); } -void __init plat_setup(void) +void __init tx3927_setup(void) { int i; diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c index e1dd7e009750..90fda0d9915f 100644 --- a/arch/mips/mips-boards/sead/sead_int.c +++ b/arch/mips/mips-boards/sead/sead_int.c @@ -30,19 +30,9 @@ extern asmlinkage void mipsIRQ(void); -asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART0, regs); -} - -asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs) -{ - do_IRQ(SEADINT_UART1, regs); -} - void __init arch_init_irq(void) { - mips_cpu_irq_init(0); + mips_cpu_irq_init(MIPSCPU_INT_BASE); /* Now safe to set the exception vector. */ set_except_vector(0, mipsIRQ); diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c index de90bec5505e..f966bc161dfa 100644 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ b/arch/mips/mips-boards/sead/sead_setup.c @@ -45,7 +45,7 @@ const char *get_system_type(void) return "MIPS SEAD"; } -static void __init sead_setup(void) +void __init plat_setup(void) { ioport_resource.end = 0x7fffffff; @@ -69,7 +69,7 @@ static void __init serial_init(void) #else s.iobase = SEAD_UART0_REGS_BASE+3; #endif - s.irq = SEADINT_UART0; + s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0; s.uartclk = SEAD_BASE_BAUD * 16; s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; s.iotype = 0; diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index d0b5c9dd0ea4..e5eceed1beff 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -178,7 +178,7 @@ void gt64240_time_init(void) timer.name = "timer"; timer.dev_id = NULL; timer.next = NULL; - timer.mask = 0; + timer.mask = CPU_MASK_NONE; irq_desc[6].action = &timer; enable_irq(6); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 7b7468304022..741e67c9195a 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100) += ops-gt96100.o obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o -obj-$(CONFIG_MIPS_TX3927) += ops-jmr3927.o +obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 0e0daadc303d..42530a0b84b3 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -72,13 +72,9 @@ static inline int check_abort(void) static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret, busno; + int ret; - /* check if the bus is top-level */ - if (bus->parent != NULL) - busno = bus->number; - - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret, busno; + int ret; - /* check if the bus is top-level */ - if (bus->parent != NULL) - bus = bus->number; - else - bus = 0; - - ret = mkaddr(busno, devfn, where); + ret = mkaddr(bus->number, devfn, where); if (ret) return ret; @@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, break; case 2: - *(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) = + *(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) = cpu_to_le16(val); break; @@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, } struct pci_ops jmr3927_pci_ops = { - jmr3927_pcibios_read_config, - jmr3927_pcibios_write_config, + jmr3927_pci_read_config, + jmr3927_pci_write_config, }; @@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr) { unsigned long val; - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr) void tc_writel(unsigned long data, volatile __u32 * addr) { - addr = PHYSADDR(addr); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = - (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = + (unsigned long) CPHYSADDR(addr); + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); @@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr) ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xff; /* clear by setting */ @@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr) data = data | (data << 8) | (data << 16) | (data << 24); ioaddr = (unsigned long) addr; offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x7; - else if (offset == 1) - byte = 0xb; - else if (offset == 2) - byte = 0xd; - else if (offset == 3) - byte = 0xe; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + byte = 0xf & ~(8 >> offset); + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr) int byte; ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); val = val & 0xffff; /* clear by setting */ @@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr) data = data | (data << 16); ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - if (offset == 0) - byte = 0x3; - else if (offset == 2) - byte = 0xc; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + offset = ioaddr & 0x2; + byte = 3 << offset; + + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); /* clear by setting */ @@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); val = - le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr-> + le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> ipcidata); /* clear by setting */ tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; @@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr) __u32 ioaddr; ioaddr = (unsigned long) addr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = cpu_to_le32(data); - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = (unsigned long) ioaddr; - *(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe = + *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | PCI_IPCIBE_IBE_LONG; while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c index 95a028769e56..f02ef6e36b02 100644 --- a/arch/mips/pci/pci-jmr3927.c +++ b/arch/mips/pci/pci-jmr3927.c @@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = { .pci_ops = &jmr3927_pci_ops, .io_resource = &pci_io_resource, .mem_resource = &pci_mem_resource, - .mem_offset = JMR3927_PCIMEM; + .mem_offset = JMR3927_PCIMEM }; diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c index eb3a16a04fee..41b5eca1148c 100644 --- a/arch/mips/sgi-ip32/crime.c +++ b/arch/mips/sgi-ip32/crime.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -18,8 +19,10 @@ #include #include -struct sgi_crime *crime; -struct sgi_mace *mace; +struct sgi_crime __iomem *crime; +struct sgi_mace __iomem *mace; + +EXPORT_SYMBOL_GPL(mace); void __init crime_init(void) { diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 988844a169e6..d016d672ec2b 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -499,8 +499,12 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path) dev = create_parisc_device(mod_path); if (dev->id.hw_type != HPHW_FAULTY) { - printk("Two devices have hardware path %s. Please file a bug with HP.\n" - "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev)); + printk(KERN_ERR "Two devices have hardware path [%s]. " + "IODC data for second device: " + "%02x%02x%02x%02x%02x%02x\n" + "Rearranging GSC cards sometimes helps\n", + parisc_pathname(dev), iodc_data[0], iodc_data[1], + iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]); return NULL; } diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index c7e66ee5b083..9af4b22a6d77 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -1846,6 +1846,7 @@ sys_clone_wrapper: ldo -16(%r30),%r29 /* Reference param save area */ #endif + /* WARNING - Clobbers r19 and r21, userspace must save these! */ STREG %r2,PT_GR19(%r1) /* save for child */ STREG %r30,PT_GR21(%r1) BL sys_clone,%r2 diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c index 1a1c66422736..8f563871e83c 100644 --- a/arch/parisc/kernel/inventory.c +++ b/arch/parisc/kernel/inventory.c @@ -188,7 +188,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index) temp = pa_pdc_cell.cba; dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path); if (!dev) { - return PDC_NE_MOD; + return PDC_OK; } /* alloc_pa_dev sets dev->hpa */ diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c index 0a331104ad56..4eada1bb27f0 100644 --- a/arch/parisc/kernel/ioctl32.c +++ b/arch/parisc/kernel/ioctl32.c @@ -19,536 +19,6 @@ #define CODE #include "compat_ioctl.c" -/* Use this to get at 32-bit user passed pointers. - See sys_sparc32.c for description about these. */ -#define A(__x) ((unsigned long)(__x)) -/* The same for use with copy_from_user() and copy_to_user(). */ -#define B(__x) ((void *)(unsigned long)(__x)) - -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -/* This really belongs in include/linux/drm.h -DaveM */ -#include "../../../drivers/char/drm/drm.h" - -typedef struct drm32_version { - int version_major; /* Major version */ - int version_minor; /* Minor version */ - int version_patchlevel;/* Patch level */ - int name_len; /* Length of name buffer */ - u32 name; /* Name of driver */ - int date_len; /* Length of date buffer */ - u32 date; /* User-space buffer to hold date */ - int desc_len; /* Length of desc buffer */ - u32 desc; /* User-space buffer to hold desc */ -} drm32_version_t; -#define DRM32_IOCTL_VERSION DRM_IOWR(0x00, drm32_version_t) - -static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_version_t *uversion = (drm32_version_t *)arg; - char *name_ptr, *date_ptr, *desc_ptr; - u32 tmp1, tmp2, tmp3; - drm_version_t kversion; - mm_segment_t old_fs; - int ret; - - memset(&kversion, 0, sizeof(kversion)); - if (get_user(kversion.name_len, &uversion->name_len) || - get_user(kversion.date_len, &uversion->date_len) || - get_user(kversion.desc_len, &uversion->desc_len) || - get_user(tmp1, &uversion->name) || - get_user(tmp2, &uversion->date) || - get_user(tmp3, &uversion->desc)) - return -EFAULT; - - name_ptr = (char *) A(tmp1); - date_ptr = (char *) A(tmp2); - desc_ptr = (char *) A(tmp3); - - ret = -ENOMEM; - if (kversion.name_len && name_ptr) { - kversion.name = kmalloc(kversion.name_len, GFP_KERNEL); - if (!kversion.name) - goto out; - } - if (kversion.date_len && date_ptr) { - kversion.date = kmalloc(kversion.date_len, GFP_KERNEL); - if (!kversion.date) - goto out; - } - if (kversion.desc_len && desc_ptr) { - kversion.desc = kmalloc(kversion.desc_len, GFP_KERNEL); - if (!kversion.desc) - goto out; - } - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl (fd, DRM_IOCTL_VERSION, (unsigned long)&kversion); - set_fs(old_fs); - - if (!ret) { - if ((kversion.name && - copy_to_user(name_ptr, kversion.name, kversion.name_len)) || - (kversion.date && - copy_to_user(date_ptr, kversion.date, kversion.date_len)) || - (kversion.desc && - copy_to_user(desc_ptr, kversion.desc, kversion.desc_len))) - ret = -EFAULT; - if (put_user(kversion.version_major, &uversion->version_major) || - put_user(kversion.version_minor, &uversion->version_minor) || - put_user(kversion.version_patchlevel, &uversion->version_patchlevel) || - put_user(kversion.name_len, &uversion->name_len) || - put_user(kversion.date_len, &uversion->date_len) || - put_user(kversion.desc_len, &uversion->desc_len)) - ret = -EFAULT; - } - -out: - kfree(kversion.name); - kfree(kversion.date); - kfree(kversion.desc); - return ret; -} - -typedef struct drm32_unique { - int unique_len; /* Length of unique */ - u32 unique; /* Unique name for driver instantiation */ -} drm32_unique_t; -#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t) -#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t) - -static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_unique_t *uarg = (drm32_unique_t *)arg; - drm_unique_t karg; - mm_segment_t old_fs; - char *uptr; - u32 tmp; - int ret; - - if (get_user(karg.unique_len, &uarg->unique_len)) - return -EFAULT; - karg.unique = NULL; - - if (get_user(tmp, &uarg->unique)) - return -EFAULT; - - uptr = (char *) A(tmp); - - if (uptr) { - karg.unique = kmalloc(karg.unique_len, GFP_KERNEL); - if (!karg.unique) - return -ENOMEM; - if (cmd == DRM32_IOCTL_SET_UNIQUE && - copy_from_user(karg.unique, uptr, karg.unique_len)) { - kfree(karg.unique); - return -EFAULT; - } - } - - old_fs = get_fs(); - set_fs(KERNEL_DS); - if (cmd == DRM32_IOCTL_GET_UNIQUE) - ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)&karg); - else - ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)&karg); - set_fs(old_fs); - - if (!ret) { - if (cmd == DRM32_IOCTL_GET_UNIQUE && - uptr != NULL && - copy_to_user(uptr, karg.unique, karg.unique_len)) - ret = -EFAULT; - if (put_user(karg.unique_len, &uarg->unique_len)) - ret = -EFAULT; - } - - kfree(karg.unique); - return ret; -} - -typedef struct drm32_map { - u32 offset; /* Requested physical address (0 for SAREA)*/ - u32 size; /* Requested physical size (bytes) */ - drm_map_type_t type; /* Type of memory to map */ - drm_map_flags_t flags; /* Flags */ - u32 handle; /* User-space: "Handle" to pass to mmap */ - /* Kernel-space: kernel-virtual address */ - int mtrr; /* MTRR slot used */ - /* Private data */ -} drm32_map_t; -#define DRM32_IOCTL_ADD_MAP DRM_IOWR(0x15, drm32_map_t) - -static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_map_t *uarg = (drm32_map_t *) arg; - drm_map_t karg; - mm_segment_t old_fs; - u32 tmp; - int ret; - - ret = get_user(karg.offset, &uarg->offset); - ret |= get_user(karg.size, &uarg->size); - ret |= get_user(karg.type, &uarg->type); - ret |= get_user(karg.flags, &uarg->flags); - ret |= get_user(tmp, &uarg->handle); - ret |= get_user(karg.mtrr, &uarg->mtrr); - if (ret) - return -EFAULT; - - karg.handle = (void *) A(tmp); - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - ret = put_user(karg.offset, &uarg->offset); - ret |= put_user(karg.size, &uarg->size); - ret |= put_user(karg.type, &uarg->type); - ret |= put_user(karg.flags, &uarg->flags); - tmp = (u32) (long)karg.handle; - ret |= put_user(tmp, &uarg->handle); - ret |= put_user(karg.mtrr, &uarg->mtrr); - if (ret) - ret = -EFAULT; - } - - return ret; -} - -typedef struct drm32_buf_info { - int count; /* Entries in list */ - u32 list; /* (drm_buf_desc_t *) */ -} drm32_buf_info_t; -#define DRM32_IOCTL_INFO_BUFS DRM_IOWR(0x18, drm32_buf_info_t) - -static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_info_t *uarg = (drm32_buf_info_t *)arg; - drm_buf_desc_t *ulist; - drm_buf_info_t karg; - mm_segment_t old_fs; - int orig_count, ret; - u32 tmp; - - if (get_user(karg.count, &uarg->count) || - get_user(tmp, &uarg->list)) - return -EFAULT; - - ulist = (drm_buf_desc_t *) A(tmp); - - orig_count = karg.count; - - karg.list = kmalloc(karg.count * sizeof(drm_buf_desc_t), GFP_KERNEL); - if (!karg.list) - return -EFAULT; - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - if (karg.count <= orig_count && - (copy_to_user(ulist, karg.list, - karg.count * sizeof(drm_buf_desc_t)))) - ret = -EFAULT; - if (put_user(karg.count, &uarg->count)) - ret = -EFAULT; - } - - kfree(karg.list); - return ret; -} - -typedef struct drm32_buf_free { - int count; - u32 list; /* (int *) */ -} drm32_buf_free_t; -#define DRM32_IOCTL_FREE_BUFS DRM_IOW( 0x1a, drm32_buf_free_t) - -static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_free_t *uarg = (drm32_buf_free_t *)arg; - drm_buf_free_t karg; - mm_segment_t old_fs; - int *ulist; - int ret; - u32 tmp; - - if (get_user(karg.count, &uarg->count) || - get_user(tmp, &uarg->list)) - return -EFAULT; - - ulist = (int *) A(tmp); - - karg.list = kmalloc(karg.count * sizeof(int), GFP_KERNEL); - if (!karg.list) - return -ENOMEM; - - ret = -EFAULT; - if (copy_from_user(karg.list, ulist, (karg.count * sizeof(int)))) - goto out; - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long) &karg); - set_fs(old_fs); - -out: - kfree(karg.list); - return ret; -} - -typedef struct drm32_buf_pub { - int idx; /* Index into master buflist */ - int total; /* Buffer size */ - int used; /* Amount of buffer in use (for DMA) */ - u32 address; /* Address of buffer (void *) */ -} drm32_buf_pub_t; - -typedef struct drm32_buf_map { - int count; /* Length of buflist */ - u32 virtual; /* Mmaped area in user-virtual (void *) */ - u32 list; /* Buffer information (drm_buf_pub_t *) */ -} drm32_buf_map_t; -#define DRM32_IOCTL_MAP_BUFS DRM_IOWR(0x19, drm32_buf_map_t) - -static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_buf_map_t *uarg = (drm32_buf_map_t *)arg; - drm32_buf_pub_t *ulist; - drm_buf_map_t karg; - mm_segment_t old_fs; - int orig_count, ret, i; - u32 tmp1, tmp2; - - if (get_user(karg.count, &uarg->count) || - get_user(tmp1, &uarg->virtual) || - get_user(tmp2, &uarg->list)) - return -EFAULT; - - karg.virtual = (void *) A(tmp1); - ulist = (drm32_buf_pub_t *) A(tmp2); - - orig_count = karg.count; - - karg.list = kmalloc(karg.count * sizeof(drm_buf_pub_t), GFP_KERNEL); - if (!karg.list) - return -ENOMEM; - - ret = -EFAULT; - for (i = 0; i < karg.count; i++) { - if (get_user(karg.list[i].idx, &ulist[i].idx) || - get_user(karg.list[i].total, &ulist[i].total) || - get_user(karg.list[i].used, &ulist[i].used) || - get_user(tmp1, &ulist[i].address)) - goto out; - - karg.list[i].address = (void *) A(tmp1); - } - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - for (i = 0; i < orig_count; i++) { - tmp1 = (u32) (long) karg.list[i].address; - if (put_user(karg.list[i].idx, &ulist[i].idx) || - put_user(karg.list[i].total, &ulist[i].total) || - put_user(karg.list[i].used, &ulist[i].used) || - put_user(tmp1, &ulist[i].address)) { - ret = -EFAULT; - goto out; - } - } - if (put_user(karg.count, &uarg->count)) - ret = -EFAULT; - } - -out: - kfree(karg.list); - return ret; -} - -typedef struct drm32_dma { - /* Indices here refer to the offset into - buflist in drm_buf_get_t. */ - int context; /* Context handle */ - int send_count; /* Number of buffers to send */ - u32 send_indices; /* List of handles to buffers (int *) */ - u32 send_sizes; /* Lengths of data to send (int *) */ - drm_dma_flags_t flags; /* Flags */ - int request_count; /* Number of buffers requested */ - int request_size; /* Desired size for buffers */ - u32 request_indices; /* Buffer information (int *) */ - u32 request_sizes; /* (int *) */ - int granted_count; /* Number of buffers granted */ -} drm32_dma_t; -#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t) - -/* RED PEN The DRM layer blindly dereferences the send/request - * indice/size arrays even though they are userland - * pointers. -DaveM - */ -static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_dma_t *uarg = (drm32_dma_t *) arg; - int *u_si, *u_ss, *u_ri, *u_rs; - drm_dma_t karg; - mm_segment_t old_fs; - int ret; - u32 tmp1, tmp2, tmp3, tmp4; - - karg.send_indices = karg.send_sizes = NULL; - karg.request_indices = karg.request_sizes = NULL; - - if (get_user(karg.context, &uarg->context) || - get_user(karg.send_count, &uarg->send_count) || - get_user(tmp1, &uarg->send_indices) || - get_user(tmp2, &uarg->send_sizes) || - get_user(karg.flags, &uarg->flags) || - get_user(karg.request_count, &uarg->request_count) || - get_user(karg.request_size, &uarg->request_size) || - get_user(tmp3, &uarg->request_indices) || - get_user(tmp4, &uarg->request_sizes) || - get_user(karg.granted_count, &uarg->granted_count)) - return -EFAULT; - - u_si = (int *) A(tmp1); - u_ss = (int *) A(tmp2); - u_ri = (int *) A(tmp3); - u_rs = (int *) A(tmp4); - - if (karg.send_count) { - karg.send_indices = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL); - karg.send_sizes = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL); - - ret = -ENOMEM; - if (!karg.send_indices || !karg.send_sizes) - goto out; - - ret = -EFAULT; - if (copy_from_user(karg.send_indices, u_si, - (karg.send_count * sizeof(int))) || - copy_from_user(karg.send_sizes, u_ss, - (karg.send_count * sizeof(int)))) - goto out; - } - - if (karg.request_count) { - karg.request_indices = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL); - karg.request_sizes = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL); - - ret = -ENOMEM; - if (!karg.request_indices || !karg.request_sizes) - goto out; - - ret = -EFAULT; - if (copy_from_user(karg.request_indices, u_ri, - (karg.request_count * sizeof(int))) || - copy_from_user(karg.request_sizes, u_rs, - (karg.request_count * sizeof(int)))) - goto out; - } - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - if (put_user(karg.context, &uarg->context) || - put_user(karg.send_count, &uarg->send_count) || - put_user(karg.flags, &uarg->flags) || - put_user(karg.request_count, &uarg->request_count) || - put_user(karg.request_size, &uarg->request_size) || - put_user(karg.granted_count, &uarg->granted_count)) - ret = -EFAULT; - - if (karg.send_count) { - if (copy_to_user(u_si, karg.send_indices, - (karg.send_count * sizeof(int))) || - copy_to_user(u_ss, karg.send_sizes, - (karg.send_count * sizeof(int)))) - ret = -EFAULT; - } - if (karg.request_count) { - if (copy_to_user(u_ri, karg.request_indices, - (karg.request_count * sizeof(int))) || - copy_to_user(u_rs, karg.request_sizes, - (karg.request_count * sizeof(int)))) - ret = -EFAULT; - } - } - -out: - kfree(karg.send_indices); - kfree(karg.send_sizes); - kfree(karg.request_indices); - kfree(karg.request_sizes); - return ret; -} - -typedef struct drm32_ctx_res { - int count; - u32 contexts; /* (drm_ctx_t *) */ -} drm32_ctx_res_t; -#define DRM32_IOCTL_RES_CTX DRM_IOWR(0x26, drm32_ctx_res_t) - -static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg) -{ - drm32_ctx_res_t *uarg = (drm32_ctx_res_t *) arg; - drm_ctx_t *ulist; - drm_ctx_res_t karg; - mm_segment_t old_fs; - int orig_count, ret; - u32 tmp; - - karg.contexts = NULL; - if (get_user(karg.count, &uarg->count) || - get_user(tmp, &uarg->contexts)) - return -EFAULT; - - ulist = (drm_ctx_t *) A(tmp); - - orig_count = karg.count; - if (karg.count && ulist) { - karg.contexts = kmalloc((karg.count * sizeof(drm_ctx_t)), GFP_KERNEL); - if (!karg.contexts) - return -ENOMEM; - if (copy_from_user(karg.contexts, ulist, - (karg.count * sizeof(drm_ctx_t)))) { - kfree(karg.contexts); - return -EFAULT; - } - } - - old_fs = get_fs(); - set_fs(KERNEL_DS); - ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long) &karg); - set_fs(old_fs); - - if (!ret) { - if (orig_count) { - if (copy_to_user(ulist, karg.contexts, - (orig_count * sizeof(drm_ctx_t)))) - ret = -EFAULT; - } - if (put_user(karg.count, &uarg->count)) - ret = -EFAULT; - } - - kfree(karg.contexts); - return ret; -} - -#endif - #define HANDLE_IOCTL(cmd, handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd, sys_ioctl) @@ -561,11 +31,6 @@ IOCTL_TABLE_START #define DECLARES #include "compat_ioctl.c" -/* PA-specific ioctls */ -COMPATIBLE_IOCTL(PA_PERF_ON) -COMPATIBLE_IOCTL(PA_PERF_OFF) -COMPATIBLE_IOCTL(PA_PERF_VERSION) - /* And these ioctls need translation */ HANDLE_IOCTL(SIOCGPPPSTATS, dev_ifsioc) HANDLE_IOCTL(SIOCGPPPCSTATS, dev_ifsioc) @@ -590,17 +55,6 @@ HANDLE_IOCTL(RTC_EPOCH_READ, w_long) COMPATIBLE_IOCTL(RTC_EPOCH_SET) #endif -#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE) -HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version); -HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique); -HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique); -HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap); -HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs); -HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs); -HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs); -HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma); -HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx); -#endif /* DRM */ IOCTL_TABLE_END int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 006385dbee66..197936d9359a 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -30,6 +30,9 @@ #include #include #include +#include + +#include #undef PARISC_IRQ_CR16_COUNTS @@ -43,26 +46,34 @@ extern irqreturn_t ipi_interrupt(int, void *, struct pt_regs *); */ static volatile unsigned long cpu_eiem = 0; -static void cpu_set_eiem(void *info) -{ - set_eiem((unsigned long) info); -} - -static inline void cpu_disable_irq(unsigned int irq) +static void cpu_disable_irq(unsigned int irq) { unsigned long eirr_bit = EIEM_MASK(irq); cpu_eiem &= ~eirr_bit; - on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1); + /* Do nothing on the other CPUs. If they get this interrupt, + * The & cpu_eiem in the do_cpu_irq_mask() ensures they won't + * handle it, and the set_eiem() at the bottom will ensure it + * then gets disabled */ } static void cpu_enable_irq(unsigned int irq) { unsigned long eirr_bit = EIEM_MASK(irq); - mtctl(eirr_bit, 23); /* clear EIRR bit before unmasking */ cpu_eiem |= eirr_bit; - on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1); + + /* FIXME: while our interrupts aren't nested, we cannot reset + * the eiem mask if we're already in an interrupt. Once we + * implement nested interrupts, this can go away + */ + if (!in_interrupt()) + set_eiem(cpu_eiem); + + /* This is just a simple NOP IPI. But what it does is cause + * all the other CPUs to do a set_eiem(cpu_eiem) at the end + * of the interrupt handler */ + smp_send_all_nop(); } static unsigned int cpu_startup_irq(unsigned int irq) @@ -74,6 +85,35 @@ static unsigned int cpu_startup_irq(unsigned int irq) void no_ack_irq(unsigned int irq) { } void no_end_irq(unsigned int irq) { } +#ifdef CONFIG_SMP +int cpu_check_affinity(unsigned int irq, cpumask_t *dest) +{ + int cpu_dest; + + /* timer and ipi have to always be received on all CPUs */ + if (irq == TIMER_IRQ || irq == IPI_IRQ) { + /* Bad linux design decision. The mask has already + * been set; we must reset it */ + irq_affinity[irq] = CPU_MASK_ALL; + return -EINVAL; + } + + /* whatever mask they set, we just allow one CPU */ + cpu_dest = first_cpu(*dest); + *dest = cpumask_of_cpu(cpu_dest); + + return 0; +} + +static void cpu_set_affinity_irq(unsigned int irq, cpumask_t dest) +{ + if (cpu_check_affinity(irq, &dest)) + return; + + irq_affinity[irq] = dest; +} +#endif + static struct hw_interrupt_type cpu_interrupt_type = { .typename = "CPU", .startup = cpu_startup_irq, @@ -82,7 +122,9 @@ static struct hw_interrupt_type cpu_interrupt_type = { .disable = cpu_disable_irq, .ack = no_ack_irq, .end = no_end_irq, -// .set_affinity = cpu_set_affinity_irq, +#ifdef CONFIG_SMP + .set_affinity = cpu_set_affinity_irq, +#endif }; int show_interrupts(struct seq_file *p, void *v) @@ -219,6 +261,17 @@ int txn_alloc_irq(unsigned int bits_wide) return -1; } + +unsigned long txn_affinity_addr(unsigned int irq, int cpu) +{ +#ifdef CONFIG_SMP + irq_affinity[irq] = cpumask_of_cpu(cpu); +#endif + + return cpu_data[cpu].txn_addr; +} + + unsigned long txn_alloc_addr(unsigned int virt_irq) { static int next_cpu = -1; @@ -233,7 +286,7 @@ unsigned long txn_alloc_addr(unsigned int virt_irq) if (next_cpu >= NR_CPUS) next_cpu = 0; /* nothing else, assign monarch */ - return cpu_data[next_cpu].txn_addr; + return txn_affinity_addr(virt_irq, next_cpu); } @@ -250,10 +303,11 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq_enter(); /* - * Only allow interrupt processing to be interrupted by the - * timer tick + * Don't allow TIMER or IPI nested interrupts. + * Allowing any single interrupt to nest can lead to that CPU + * handling interrupts with all enabled interrupts unmasked. */ - set_eiem(EIEM_MASK(TIMER_IRQ)); + set_eiem(0UL); /* 1) only process IRQs that are enabled/unmasked (cpu_eiem) * 2) We loop here on EIRR contents in order to avoid @@ -267,23 +321,41 @@ void do_cpu_irq_mask(struct pt_regs *regs) if (!eirr_val) break; - if (eirr_val & EIEM_MASK(TIMER_IRQ)) - set_eiem(0); - mtctl(eirr_val, 23); /* reset bits we are going to process */ /* Work our way from MSb to LSb...same order we alloc EIRs */ for (irq = TIMER_IRQ; eirr_val && bit; bit>>=1, irq++) { +#ifdef CONFIG_SMP + cpumask_t dest = irq_affinity[irq]; +#endif if (!(bit & eirr_val)) continue; /* clear bit in mask - can exit loop sooner */ eirr_val &= ~bit; +#ifdef CONFIG_SMP + /* FIXME: because generic set affinity mucks + * with the affinity before sending it to us + * we can get the situation where the affinity is + * wrong for our CPU type interrupts */ + if (irq != TIMER_IRQ && irq != IPI_IRQ && + !cpu_isset(smp_processor_id(), dest)) { + int cpu = first_cpu(dest); + + printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n", + irq, smp_processor_id(), cpu); + gsc_writel(irq + CPU_IRQ_BASE, + cpu_data[cpu].hpa); + continue; + } +#endif + __do_IRQ(irq, regs); } } - set_eiem(cpu_eiem); + + set_eiem(cpu_eiem); /* restore original mask */ irq_exit(); } @@ -291,12 +363,14 @@ void do_cpu_irq_mask(struct pt_regs *regs) static struct irqaction timer_action = { .handler = timer_interrupt, .name = "timer", + .flags = SA_INTERRUPT, }; #ifdef CONFIG_SMP static struct irqaction ipi_action = { .handler = ipi_interrupt, .name = "IPI", + .flags = SA_INTERRUPT, }; #endif diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c index 44670d6e06f4..f6fec62b6a2f 100644 --- a/arch/parisc/kernel/perf.c +++ b/arch/parisc/kernel/perf.c @@ -196,8 +196,7 @@ static int perf_open(struct inode *inode, struct file *file); static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos); static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos); -static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg); +static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg); static void perf_start_counters(void); static int perf_stop_counters(uint32_t *raddr); static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num); @@ -438,48 +437,56 @@ static void perf_patch_images(void) * must be running on the processor that you wish to change. */ -static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long error_start; - uint32_t raddr[4]; + uint32_t raddr[4]; + int error = 0; + lock_kernel(); switch (cmd) { case PA_PERF_ON: /* Start the counters */ perf_start_counters(); - return 0; + break; case PA_PERF_OFF: error_start = perf_stop_counters(raddr); if (error_start != 0) { printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start); - return -EFAULT; + error = -EFAULT; + break; } /* copy out the Counters */ if (copy_to_user((void __user *)arg, raddr, sizeof (raddr)) != 0) { - return -EFAULT; + error = -EFAULT; + break; } - return 0; + break; case PA_PERF_VERSION: /* Return the version # */ - return put_user(PERF_VERSION, (int *)arg); + error = put_user(PERF_VERSION, (int *)arg); + break; default: - break; + error = -ENOTTY; } - return -ENOTTY; + + unlock_kernel(); + + return error; } static struct file_operations perf_fops = { .llseek = no_llseek, .read = perf_read, .write = perf_write, - .ioctl = perf_ioctl, + .unlocked_ioctl = perf_ioctl, + .compat_ioctl = perf_ioctl, .open = perf_open, .release = perf_release }; diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c index b6fe202a620d..27160e8bf15b 100644 --- a/arch/parisc/kernel/ptrace.c +++ b/arch/parisc/kernel/ptrace.c @@ -264,6 +264,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) * sigkill. perhaps it should be put in the status * that it wants to exit. */ + ret = 0; DBG("sys_ptrace(KILL)\n"); if (child->exit_state == EXIT_ZOMBIE) /* already dead */ goto out_tsk; @@ -344,11 +345,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_GETEVENTMSG: ret = put_user(child->ptrace_message, (unsigned int __user *) data); - goto out; + goto out_tsk; default: ret = ptrace_request(child, request, addr, data); - goto out; + goto out_tsk; } out_wake_notrap: diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 82c24e62ab63..3a25a7bd673e 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -296,7 +296,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, struct rt_sigframe __user *frame; unsigned long rp, usp; unsigned long haddr, sigframe_size; - struct siginfo si; int err = 0; #ifdef __LP64__ compat_int_t compat_val; diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index a9ecf6465784..ce89da0f654d 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -181,12 +181,19 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) while (ops) { unsigned long which = ffz(~ops); + ops &= ~(1 << which); + switch (which) { + case IPI_NOP: +#if (kDEBUG>=100) + printk(KERN_DEBUG "CPU%d IPI_NOP\n",this_cpu); +#endif /* kDEBUG */ + break; + case IPI_RESCHEDULE: #if (kDEBUG>=100) printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu); #endif /* kDEBUG */ - ops &= ~(1 << IPI_RESCHEDULE); /* * Reschedule callback. Everything to be * done is done by the interrupt return path. @@ -197,7 +204,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) #if (kDEBUG>=100) printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu); #endif /* kDEBUG */ - ops &= ~(1 << IPI_CALL_FUNC); { volatile struct smp_call_struct *data; void (*func)(void *info); @@ -231,7 +237,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) #if (kDEBUG>=100) printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu); #endif /* kDEBUG */ - ops &= ~(1 << IPI_CPU_START); #ifdef ENTRY_SYS_CPUS p->state = STATE_RUNNING; #endif @@ -241,7 +246,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) #if (kDEBUG>=100) printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu); #endif /* kDEBUG */ - ops &= ~(1 << IPI_CPU_STOP); #ifdef ENTRY_SYS_CPUS #else halt_processor(); @@ -252,13 +256,11 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs) #if (kDEBUG>=100) printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu); #endif /* kDEBUG */ - ops &= ~(1 << IPI_CPU_TEST); break; default: printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n", this_cpu, which); - ops &= ~(1 << which); return IRQ_NONE; } /* Switch */ } /* while (ops) */ @@ -312,6 +314,12 @@ smp_send_start(void) { send_IPI_allbutself(IPI_CPU_START); } void smp_send_reschedule(int cpu) { send_IPI_single(cpu, IPI_RESCHEDULE); } +void +smp_send_all_nop(void) +{ + send_IPI_allbutself(IPI_NOP); +} + /** * Run a function on all other CPUs. @@ -338,6 +346,10 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait) /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); + + /* can also deadlock if IPIs are disabled */ + WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0); + data.func = func; data.info = info; diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index b29b76b42bb7..d66163492890 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -164,7 +164,7 @@ linux_gateway_entry: #endif STREG %r2, TASK_PT_GR30(%r1) /* ... and save it */ - STREG %r20, TASK_PT_GR20(%r1) + STREG %r20, TASK_PT_GR20(%r1) /* Syscall number */ STREG %r21, TASK_PT_GR21(%r1) STREG %r22, TASK_PT_GR22(%r1) STREG %r23, TASK_PT_GR23(%r1) /* 4th argument */ @@ -527,6 +527,7 @@ lws_compare_and_swap: We *must* giveup this call and fail. */ ldw 4(%sr2,%r20), %r28 /* Load thread register */ + /* WARNING: If cr27 cycles to the same value we have problems */ mfctl %cr27, %r21 /* Get current thread register */ cmpb,<>,n %r21, %r28, cas_lock /* Called recursive? */ b lws_exit /* Return error! */ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74bcc0ee..bb2efdd566a9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index d41ad2e675db..98f67c78d1bd 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -14,10 +14,6 @@ HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(CONFIG_PPC64),y) -OLDARCH := ppc64 -SZ := 64 - # Set default 32 bits cross compilers for vdso and boot wrapper CROSS32_COMPILE ?= @@ -37,6 +33,12 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + +ifeq ($(CONFIG_PPC64),y) +OLDARCH := ppc64 +SZ := 64 + new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) ifeq ($(new_nm),y) @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o @@ -125,11 +124,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -139,7 +138,7 @@ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ -defaultimage-$(CONFIG_PPC32) := uImage zImage +defaultimage-$(CONFIG_PPC32) := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux defaultimage-$(CONFIG_PPC_PSERIES) := zImage KBUILD_IMAGE := $(defaultimage-y) @@ -154,33 +153,22 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm .PHONY: $(BOOT_TARGETS) -boot := arch/$(OLDARCH)/boot +boot := arch/$(ARCH)/boot -# urk -ifeq ($(CONFIG_PPC64),y) $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -else -$(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@ -endif - -uImage: vmlinux - $(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@ define archhelp - @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)' - @echo ' uImage - Create a bootable image for U-Boot / PPCBoot' + @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' install - Install kernel using' @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc $(Q)rm -rf arch/$(ARCH)/include archprepare: checkbin diff --git a/arch/ppc64/boot/Makefile b/arch/powerpc/boot/Makefile similarity index 96% rename from arch/ppc64/boot/Makefile rename to arch/powerpc/boot/Makefile index 301bc1536c49..9770f587af73 100644 --- a/arch/ppc64/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -22,7 +22,8 @@ HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC +BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ + $(shell $(CROSS32CC) -print-file-name=include) -fPIC BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds OBJCOPYFLAGS := contents,alloc,load,readonly,data @@ -98,7 +99,7 @@ quiet_cmd_ramdisk = RAMDISK $@ cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s $< -o $@ + cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ vmlinux.strip: vmlinux $(call if_changed,stripvm) diff --git a/arch/ppc64/boot/README b/arch/powerpc/boot/README similarity index 100% rename from arch/ppc64/boot/README rename to arch/powerpc/boot/README diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c similarity index 100% rename from arch/ppc64/boot/addRamDisk.c rename to arch/powerpc/boot/addRamDisk.c diff --git a/arch/ppc64/boot/addnote.c b/arch/powerpc/boot/addnote.c similarity index 100% rename from arch/ppc64/boot/addnote.c rename to arch/powerpc/boot/addnote.c diff --git a/arch/ppc64/boot/crt0.S b/arch/powerpc/boot/crt0.S similarity index 80% rename from arch/ppc64/boot/crt0.S rename to arch/powerpc/boot/crt0.S index 9cc442263939..d2f2ace56cd3 100644 --- a/arch/ppc64/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync diff --git a/arch/ppc64/boot/div64.S b/arch/powerpc/boot/div64.S similarity index 100% rename from arch/ppc64/boot/div64.S rename to arch/powerpc/boot/div64.S diff --git a/arch/ppc64/boot/elf.h b/arch/powerpc/boot/elf.h similarity index 100% rename from arch/ppc64/boot/elf.h rename to arch/powerpc/boot/elf.h diff --git a/arch/ppc64/boot/install.sh b/arch/powerpc/boot/install.sh similarity index 100% rename from arch/ppc64/boot/install.sh rename to arch/powerpc/boot/install.sh diff --git a/arch/ppc64/boot/main.c b/arch/powerpc/boot/main.c similarity index 77% rename from arch/ppc64/boot/main.c rename to arch/powerpc/boot/main.c index e0dde24a72ce..64ec93116fa6 100644 --- a/arch/ppc64/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -42,6 +42,8 @@ static struct addr_range vmlinux; static struct addr_range vmlinuz; static struct addr_range initrd; +static unsigned long elfoffset; + static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */ static char elfheader[256]; @@ -131,13 +133,70 @@ static unsigned long try_claim(unsigned long size) return addr; } +static int is_elf64(void *hdr) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && + elf64->e_ident[EI_DATA] == ELFDATA2MSB && + elf64->e_type == ET_EXEC && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + elfoffset = (unsigned long)elf64ph->p_offset; + vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset; + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset; + return 1; +} + +static int is_elf32(void *hdr) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + elf32->e_type == ET_EXEC && + elf32->e_machine == EM_PPC)) + return 0; + + elf32 = (Elf32_Ehdr *)elfheader; + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0) + break; + if (i >= elf32->e_phnum) + return 0; + + elfoffset = elf32ph->p_offset; + vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset; + vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset; + return 1; +} + void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) { - unsigned long i; int len; kernel_entry_t kernel_entry; - Elf64_Ehdr *elf64; - Elf64_Phdr *elf64ph; memset(__bss_start, 0, _end - __bss_start); @@ -153,6 +212,22 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); + vmlinuz.addr = (unsigned long)_vmlinux_start; + vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); + + /* gunzip the ELF header of the kernel */ + if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { + len = vmlinuz.size; + gunzip(elfheader, sizeof(elfheader), + (unsigned char *)vmlinuz.addr, &len); + } else + memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); + + if (!is_elf64(elfheader) && !is_elf32(elfheader)) { + printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + exit(); + } + /* * The first available claim_base must be above the end of the * the loaded kernel wrapper file (_start to _end includes the @@ -172,46 +247,11 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) claim_base = PROG_START; #endif - vmlinuz.addr = (unsigned long)_vmlinux_start; - vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); - - /* gunzip the ELF header of the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - len = vmlinuz.size; - gunzip(elfheader, sizeof(elfheader), - (unsigned char *)vmlinuz.addr, &len); - } else - memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); - - elf64 = (Elf64_Ehdr *)elfheader; - if ( elf64->e_ident[EI_MAG0] != ELFMAG0 || - elf64->e_ident[EI_MAG1] != ELFMAG1 || - elf64->e_ident[EI_MAG2] != ELFMAG2 || - elf64->e_ident[EI_MAG3] != ELFMAG3 || - elf64->e_ident[EI_CLASS] != ELFCLASS64 || - elf64->e_ident[EI_DATA] != ELFDATA2MSB || - elf64->e_type != ET_EXEC || - elf64->e_machine != EM_PPC64 ) - { - printf("Error: not a valid PPC64 ELF file!\n\r"); - exit(); - } - - elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + - (unsigned long)elf64->e_phoff); - for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) { - if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) - break; - } - vmlinux.size = (unsigned long)elf64ph->p_filesz + - (unsigned long)elf64ph->p_offset; /* We need to claim the memsize plus the file offset since gzip * will expand the header (file offset), then the kernel, then * possible rubbish we don't care about. But the kernel bss must * be claimed (it will be zero'd by the kernel itself) */ - vmlinux.memsize = (unsigned long)elf64ph->p_memsz + - (unsigned long)elf64ph->p_offset; printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); vmlinux.addr = try_claim(vmlinux.memsize); if (vmlinux.addr == 0) { @@ -254,9 +294,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) /* Skip over the ELF header */ #ifdef DEBUG printf("... skipping 0x%lx bytes of ELF header\n\r", - (unsigned long)elf64ph->p_offset); + elfoffset); #endif - vmlinux.addr += (unsigned long)elf64ph->p_offset; + vmlinux.addr += elfoffset; flush_cache((void *)vmlinux.addr, vmlinux.size); @@ -272,7 +312,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) (unsigned long)prom, NULL); #endif - kernel_entry( a1, a2, prom, NULL ); + kernel_entry(a1, a2, prom, NULL); printf("Error: Linux kernel returned to zImage bootloader!\n\r"); diff --git a/arch/ppc64/boot/page.h b/arch/powerpc/boot/page.h similarity index 100% rename from arch/ppc64/boot/page.h rename to arch/powerpc/boot/page.h diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h similarity index 100% rename from arch/ppc64/boot/ppc_asm.h rename to arch/powerpc/boot/ppc_asm.h diff --git a/arch/ppc64/boot/prom.c b/arch/powerpc/boot/prom.c similarity index 100% rename from arch/ppc64/boot/prom.c rename to arch/powerpc/boot/prom.c diff --git a/arch/ppc64/boot/prom.h b/arch/powerpc/boot/prom.h similarity index 100% rename from arch/ppc64/boot/prom.h rename to arch/powerpc/boot/prom.h diff --git a/arch/ppc64/boot/stdio.h b/arch/powerpc/boot/stdio.h similarity index 100% rename from arch/ppc64/boot/stdio.h rename to arch/powerpc/boot/stdio.h diff --git a/arch/ppc64/boot/string.S b/arch/powerpc/boot/string.S similarity index 100% rename from arch/ppc64/boot/string.S rename to arch/powerpc/boot/string.S diff --git a/arch/ppc64/boot/string.h b/arch/powerpc/boot/string.h similarity index 100% rename from arch/ppc64/boot/string.h rename to arch/powerpc/boot/string.h diff --git a/arch/ppc64/boot/zImage.lds b/arch/powerpc/boot/zImage.lds similarity index 100% rename from arch/ppc64/boot/zImage.lds rename to arch/powerpc/boot/zImage.lds diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 67ffecbc05cb..4b433411b9e3 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:36:20 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 # # Code maturity level options @@ -66,31 +81,69 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_CELL=y CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y # CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_MMIO_NVRAM=y +CONFIG_CELL_IIC=y +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -98,30 +151,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +180,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -183,6 +228,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -284,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -345,14 +398,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -442,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -495,7 +541,6 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -625,7 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -633,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -649,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -699,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -756,6 +805,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -943,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -962,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1008,17 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m # # Hardware crypto devices # - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index e76854f8c121..e7c23e3902b8 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Mon Nov 7 13:37:59 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:39:20 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -82,6 +82,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Platform support # @@ -137,6 +154,7 @@ CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -144,7 +162,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -215,6 +233,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -382,19 +404,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -656,7 +665,6 @@ CONFIG_SUNGEM=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -# CONFIG_FEC_8XX is not set # # Ethernet (1000 Mbit) @@ -710,6 +718,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -804,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -917,7 +928,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -932,6 +942,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set @@ -950,7 +961,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -959,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1474,10 +1485,11 @@ CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1497,7 +1509,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 62e92c7e9e27..5d0866707a75 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:09 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -68,22 +83,60 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_ISERIES=y # CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_ISERIES=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_IRQ_ALL_CPUS=y +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -91,26 +144,20 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -125,6 +172,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -166,6 +214,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -265,6 +317,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -326,14 +382,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -377,6 +425,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -454,6 +503,7 @@ CONFIG_DM_ZERO=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -561,6 +611,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -643,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -660,6 +713,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -712,6 +766,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -917,10 +975,25 @@ CONFIG_VIOTAPE=m CONFIG_VIOPATH=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -937,11 +1010,11 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y # @@ -982,17 +1055,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 7b480f3d1406..92e42613ef06 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:58 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,32 +81,67 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y CONFIG_U3_DART=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -100,27 +149,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -135,6 +178,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -193,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -254,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -351,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -533,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -549,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -599,6 +643,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -681,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -776,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set @@ -985,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8" CONFIG_NLS_UTF8=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1004,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set # CONFIG_IRQSTACKS is not set +CONFIG_BOOTX_TEXT=y # # Security options @@ -1051,12 +1111,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/defconfig b/arch/powerpc/configs/ppc64_defconfig similarity index 86% rename from arch/ppc64/defconfig rename to arch/powerpc/configs/ppc64_defconfig index e79fd60bc122..b5ba3bbd96fb 100644 --- a/arch/ppc64/defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:28:33 2005 +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -41,7 +56,7 @@ CONFIG_CPUSETS=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -67,78 +82,115 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -CONFIG_PPC_BPA=y CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_LEGACY_PROC is not set @@ -158,6 +210,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -199,6 +252,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -301,6 +358,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -338,13 +399,7 @@ CONFIG_FW_LOADER=y # # Parallel port support # -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT is not set # # Plug and Play support @@ -354,7 +409,6 @@ CONFIG_PARPORT_PC=m # Block devices # CONFIG_BLK_DEV_FD=y -# CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -370,14 +424,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -407,7 +453,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y @@ -479,6 +525,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -495,10 +542,12 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_PDC_ADMA is not set # CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set @@ -512,8 +561,6 @@ CONFIG_SCSI_SATA_SVW=y CONFIG_SCSI_IBMVSCSI=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 @@ -608,6 +655,9 @@ CONFIG_IEEE1394_AMDTP=m CONFIG_ADB_PMU=y CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y # # Network device support @@ -664,7 +714,6 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) @@ -684,7 +733,6 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -714,7 +762,6 @@ CONFIG_IBMOL=y # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -# CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set @@ -722,6 +769,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,7 +832,6 @@ CONFIG_INPUT_PCSPKR=m CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -817,10 +864,6 @@ CONFIG_SERIAL_JSM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set CONFIG_HVC_CONSOLE=y CONFIG_HVCS=m @@ -834,6 +877,7 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -851,6 +895,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -879,7 +924,6 @@ CONFIG_I2C_AMD8111=y CONFIG_I2C_KEYWEST=y CONFIG_I2C_PMAC_SMU=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -904,6 +948,7 @@ CONFIG_I2C_PMAC_SMU=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -945,7 +990,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -960,6 +1004,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -983,7 +1028,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -992,6 +1036,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1012,7 +1057,94 @@ CONFIG_LCD_DEVICE=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support @@ -1046,12 +1178,16 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,7 +1242,7 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set @@ -1114,7 +1250,6 @@ CONFIG_USB_PEGASUS=y # # USB port drivers # -# CONFIG_USB_USS720 is not set # # USB Serial Converter support @@ -1163,6 +1298,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1358,10 +1494,25 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1378,14 +1529,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y # # Security options @@ -1425,17 +1577,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 913962c1dae0..b589b196eb3f 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.15-rc1 -# Mon Nov 14 15:27:00 2005 +# Tue Nov 15 14:36:55 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -144,7 +144,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y -# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y CONFIG_SCANLOG=m @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e3721a84..9ed551b6c172 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,12 +12,12 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/ppc64/kernel/align.c b/arch/powerpc/kernel/align.c similarity index 51% rename from arch/ppc64/kernel/align.c rename to arch/powerpc/kernel/align.c index 256d5b592aa1..faaec9c6f78f 100644 --- a/arch/ppc64/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -7,6 +7,9 @@ * PowerPC 403GCX/405GP modifications. * Copyright (c) 2001-2002 PPC64 team, IBM Corp * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * + * Merge ppc32 and ppc64 implementations * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -38,10 +41,15 @@ struct aligninfo { #define F 8 /* to/from fp regs */ #define U 0x10 /* update index register */ #define M 0x20 /* multiple load/store */ -#define SW 0x40 /* byte swap */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + /* * The PowerPC stores certain bits of the instruction that caused the * alignment exception in the DSISR register. This array maps those @@ -57,14 +65,14 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 00 0 0101: lha */ { 2, ST }, /* 00 0 0110: sth */ { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F }, /* 00 0 1000: lfs */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F }, /* 00 0 1010: stfs */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ { 8, ST+F }, /* 00 0 1011: stfd */ INVALID, /* 00 0 1100 */ - { 8, LD }, /* 00 0 1101: ld */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ INVALID, /* 00 0 1110 */ - { 8, ST }, /* 00 0 1111: std */ + { 8, ST }, /* 00 0 1111: std/stdu */ { 4, LD+U }, /* 00 1 0000: lwzu */ INVALID, /* 00 1 0001 */ { 4, ST+U }, /* 00 1 0010: stwu */ @@ -73,9 +81,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 00 1 0101: lhau */ { 2, ST+U }, /* 00 1 0110: sthu */ { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+U }, /* 00 1 1000: lfsu */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+U }, /* 00 1 1010: stfsu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ { 8, ST+F+U }, /* 00 1 1011: stfdu */ INVALID, /* 00 1 1100 */ INVALID, /* 00 1 1101 */ @@ -89,10 +97,10 @@ static struct aligninfo aligninfo[128] = { { 4, LD+SE }, /* 01 0 0101: lwax */ INVALID, /* 01 0 0110 */ INVALID, /* 01 0 0111 */ - { 0, LD }, /* 01 0 1000: lswx */ - { 0, LD }, /* 01 0 1001: lswi */ - { 0, ST }, /* 01 0 1010: stswx */ - { 0, ST }, /* 01 0 1011: stswi */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ INVALID, /* 01 0 1100 */ { 8, LD+U }, /* 01 0 1101: ldu */ INVALID, /* 01 0 1110 */ @@ -115,7 +123,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 01 1 1111 */ INVALID, /* 10 0 0000 */ INVALID, /* 10 0 0001 */ - { 0, ST }, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0010: stwcx. */ INVALID, /* 10 0 0011 */ INVALID, /* 10 0 0100 */ INVALID, /* 10 0 0101 */ @@ -144,7 +152,7 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 10 1 1100 */ INVALID, /* 10 1 1101 */ INVALID, /* 10 1 1110 */ - { L1_CACHE_BYTES, ST }, /* 10 1 1111: dcbz */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ { 4, LD }, /* 11 0 0000: lwzx */ INVALID, /* 11 0 0001 */ { 4, ST }, /* 11 0 0010: stwx */ @@ -153,9 +161,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE }, /* 11 0 0101: lhax */ { 2, ST }, /* 11 0 0110: sthx */ INVALID, /* 11 0 0111 */ - { 4, LD+F }, /* 11 0 1000: lfsx */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F }, /* 11 0 1010: stfsx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ { 8, ST+F }, /* 11 0 1011: stfdx */ INVALID, /* 11 0 1100 */ { 8, LD+M }, /* 11 0 1101: lmd */ @@ -169,9 +177,9 @@ static struct aligninfo aligninfo[128] = { { 2, LD+SE+U }, /* 11 1 0101: lhaux */ { 2, ST+U }, /* 11 1 0110: sthux */ INVALID, /* 11 1 0111 */ - { 4, LD+F+U }, /* 11 1 1000: lfsux */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+U }, /* 11 1 1010: stfsux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ { 8, ST+F+U }, /* 11 1 1011: stfdux */ INVALID, /* 11 1 1100 */ INVALID, /* 11 1 1101 */ @@ -179,45 +187,175 @@ static struct aligninfo aligninfo[128] = { INVALID, /* 11 1 1111 */ }; -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - +/* + * Create a DSISR value from the instruction + */ static inline unsigned make_dsisr(unsigned instr) { unsigned dsisr; - - /* create a DSISR value from the instruction */ - dsisr = (instr & 0x03ff0000) >> 16; /* bits 6:15 --> 22:31 */ - - if ( IS_XFORM(instr) ) { - dsisr |= (instr & 0x00000006) << 14; /* bits 29:30 --> 15:16 */ - dsisr |= (instr & 0x00000040) << 8; /* bit 25 --> 17 */ - dsisr |= (instr & 0x00000780) << 3; /* bits 21:24 --> 18:21 */ + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; } - else { - dsisr |= (instr & 0x04000000) >> 12; /* bit 5 --> 17 */ - dsisr |= (instr & 0x78000000) >> 17; /* bits 1: 4 --> 18:21 */ - if ( IS_DSFORM(instr) ) { - dsisr |= (instr & 0x00000003) << 18; /* bits 30:31 --> 12:13 */ - } - } - + return dsisr; } -int -fix_alignment(struct pt_regs *regs) +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; + } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; + } + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; +} + + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) { unsigned int instr, nb, flags; - int t; - unsigned long reg, areg; - unsigned long i; - int ret; - unsigned dsisr; + unsigned int reg, areg; + unsigned int dsisr; unsigned char __user *addr; unsigned char __user *p; - unsigned long __user *lp; + int ret, t; union { - long ll; + u64 ll; double dd; unsigned char v[8]; struct { @@ -231,18 +369,22 @@ fix_alignment(struct pt_regs *regs) } data; /* - * Return 1 on success - * Return 0 if unable to handle the interrupt - * Return -EFAULT if data address is bad + * We require a complete register set, if not, then our assembly + * is broken */ + CHECK_FULL_REGS(regs); dsisr = regs->dsisr; + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { - unsigned int real_instr; - if (__get_user(real_instr, (unsigned int __user *)regs->nip)) - return 0; - dsisr = make_dsisr(real_instr); + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); } /* extract the operation and registers from the dsisr */ @@ -258,33 +400,37 @@ fix_alignment(struct pt_regs *regs) /* DAR has the operand effective address */ addr = (unsigned char __user *)regs->dar; - /* A size of 0 indicates an instruction we don't support */ - /* we also don't support the multiples (lmw, stmw, lmd, stmd) */ - if ((nb == 0) || (flags & M)) - return 0; /* too hard or invalid instruction */ - - /* - * Special handling for dcbz - * dcbz may give an alignment exception for accesses to caching inhibited - * storage + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here */ if (instr == DCBZ) - addr = (unsigned char __user *) ((unsigned long)addr & -L1_CACHE_BYTES); + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; /* Force the fprs into the save area so we can reference them */ if (flags & F) { - if (!user_mode(regs)) + /* userland only */ + if (unlikely(!user_mode(regs))) return 0; flush_fp_to_thread(current); } - - /* If we are loading, get the data from user space */ + + /* If we are loading, get the data from user space, else + * get it from register values + */ if (flags & LD) { data.ll = 0; ret = 0; @@ -301,75 +447,62 @@ fix_alignment(struct pt_regs *regs) case 2: ret |= __get_user(data.v[6], p++); ret |= __get_user(data.v[7], p++); - if (ret) + if (unlikely(ret)) return -EFAULT; } - } - - /* If we are storing, get the data from the saved gpr or fpr */ - if (flags & ST) { - if (flags & F) { - if (nb == 4) { - /* Doing stfs, have to convert to single */ - preempt_disable(); - enable_kernel_fp(); - cvt_df(¤t->thread.fpr[reg], (float *)&data.v[4], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - data.dd = current->thread.fpr[reg]; - } - else - data.ll = regs->gpr[reg]; - } - - /* Swap bytes as needed */ - if (flags & SW) { - if (nb == 2) - SWAP(data.v[6], data.v[7]); - else { /* nb must be 4 */ - SWAP(data.v[4], data.v[7]); - SWAP(data.v[5], data.v[6]); - } - } - - /* Sign extend as needed */ - if (flags & SE) { + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ if ( nb == 2 ) data.ll = data.x16.low16; else /* nb must be 4 */ data.ll = data.x32.low32; - } - - /* If we are loading, move the data to the gpr or fpr */ - if (flags & LD) { - if (flags & F) { - if (nb == 4) { - /* Doing lfs, have to convert to double */ - preempt_disable(); - enable_kernel_fp(); - cvt_fd((float *)&data.v[4], ¤t->thread.fpr[reg], ¤t->thread); - disable_kernel_fp(); - preempt_enable(); - } - else - current->thread.fpr[reg] = data.dd; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); } - else - regs->gpr[reg] = data.ll; + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; } - - /* If we are storing, copy the data to the user */ + + /* Store result to memory or update registers */ if (flags & ST) { ret = 0; p = addr; switch (nb) { - case 128: /* Special case - must be dcbz */ - lp = (unsigned long __user *)p; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - ret |= __put_user(0, lp++); - break; case 8: ret |= __put_user(data.v[0], p++); ret |= __put_user(data.v[1], p++); @@ -382,15 +515,16 @@ fix_alignment(struct pt_regs *regs) ret |= __put_user(data.v[6], p++); ret |= __put_user(data.v[7], p++); } - if (ret) + if (unlikely(ret)) return -EFAULT; - } - + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + /* Update RA as needed */ - if (flags & U) { + if (flags & U) regs->gpr[areg] = regs->dar; - } return 1; } - diff --git a/arch/ppc64/kernel/idle.c b/arch/powerpc/kernel/idle_64.c similarity index 100% rename from arch/ppc64/kernel/idle.c rename to arch/powerpc/kernel/idle_64.c diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a75ed26..624a983a9676 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/ppc64/kernel/nvram.c b/arch/powerpc/kernel/nvram_64.c similarity index 100% rename from arch/ppc64/kernel/nvram.c rename to arch/powerpc/kernel/nvram_64.c diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 3cef1b8f57f0..8b6008ab217d 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -30,17 +30,17 @@ #include #include #include -#include #include #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif unsigned long pci_probe_only = 1; -unsigned long pci_assign_all_buses = 0; +int pci_assign_all_buses = 0; /* * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch @@ -55,11 +55,6 @@ static void fixup_resource(struct resource *res, struct pci_dev *dev); static void do_bus_setup(struct pci_bus *bus); #endif -unsigned int pcibios_assign_all_busses(void) -{ - return pci_assign_all_buses; -} - /* pci_io_base -- the base address from which io bars are offsets. * This is the lowest I/O base address (so bar values are always positive), * and it *must* be the start of ISA space if an ISA bus exists because @@ -187,7 +182,7 @@ static DEFINE_SPINLOCK(hose_spinlock); /* * pci_controller(phb) initialized common variables. */ -void __devinit pci_setup_pci_controller(struct pci_controller *hose) +static void __devinit pci_setup_pci_controller(struct pci_controller *hose) { memset(hose, 0, sizeof(struct pci_controller)); @@ -197,6 +192,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose) spin_unlock(&hose_spinlock); } +static void add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb) +{ + struct property *of_prop; + unsigned int size; + + of_prop = (struct property *) + get_property(dev, "linux,pci-domain", &size); + if (of_prop != NULL) + return; + WARN_ON(of_prop && size < sizeof(int)); + if (of_prop && size < sizeof(int)) + of_prop = NULL; + size = sizeof(struct property) + sizeof(int); + if (of_prop == NULL) { + if (mem_init_done) + of_prop = kmalloc(size, GFP_KERNEL); + else + of_prop = alloc_bootmem(size); + } + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(int); + of_prop->value = (unsigned char *)&of_prop[1]; + *((int *)of_prop->value) = phb->global_number; + prom_add_property(dev, of_prop); +} + +struct pci_controller * pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + if (mem_init_done) + phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + else + phb = alloc_bootmem(sizeof (struct pci_controller)); + if (phb == NULL) + return NULL; + pci_setup_pci_controller(phb); + phb->arch_data = dev; + phb->is_dynamic = mem_init_done; + if (dev) + add_linux_pci_domain(dev, phb); + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + if (phb->arch_data) { + struct device_node *np = phb->arch_data; + int *domain = (int *)get_property(np, + "linux,pci-domain", NULL); + if (domain) + *domain = -1; + } + if (phb->is_dynamic) + kfree(phb); +} + static void __init pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -907,9 +961,10 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ - rlen = 0; - hose->io_base_phys = 0; ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + hose->io_base_phys = 0; while ((rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; pci_space = ranges[0]; @@ -1107,6 +1162,8 @@ int remap_bus_range(struct pci_bus *bus) if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) return 1; + if (start_phys == 0) + return 1; printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); if (__ioremap_explicit(start_phys, start_virt, size, _PAGE_NO_CACHE | _PAGE_GUARDED)) @@ -1124,17 +1181,6 @@ void phbs_remap_io(void) remap_bus_range(hose->bus); } -/* - * ppc64 can have multifunction devices that do not respond to function 0. - * In this case we must scan all functions. - * XXX this can go now, we use the OF device tree in all the - * cases that caused problems. -- paulus - */ -int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) -{ - return 0; -} - static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) { struct pci_controller *hose = pci_bus_to_host(dev->bus); diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 59846b40d521..af4d1bc9a2eb 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -146,9 +146,6 @@ EXPORT_SYMBOL(pci_bus_io_base); EXPORT_SYMBOL(pci_bus_io_base_phys); EXPORT_SYMBOL(pci_bus_mem_base_phys); EXPORT_SYMBOL(pci_bus_to_hose); -EXPORT_SYMBOL(pci_resource_to_bus); -EXPORT_SYMBOL(pci_phys_to_bus); -EXPORT_SYMBOL(pci_bus_to_phys); #endif /* CONFIG_PCI */ #ifdef CONFIG_NOT_COHERENT_CACHE diff --git a/include/asm-ppc64/ptrace-common.h b/arch/powerpc/kernel/ptrace-common.h similarity index 100% rename from include/asm-ppc64/ptrace-common.h rename to arch/powerpc/kernel/ptrace-common.h diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 3d2abd95c7ae..400793c71304 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -36,8 +36,9 @@ #include #include #include + #ifdef CONFIG_PPC64 -#include +#include "ptrace-common.h" #endif #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 91eb952e0293..61762640b877 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -33,7 +33,8 @@ #include #include #include -#include + +#include "ptrace-common.h" /* * does not yet catch signals sent when the child dies. diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b948662704c..635d3b9a8811 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 0e5a8e116653..60dec2401c26 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -304,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb, unsigned int addr_size_words) { - pci_setup_pci_controller(phb); - if (is_python(dev)) python_countermeasures(dev, addr_size_words); if (phb_set_bus_ranges(dev, phb)) return 1; - phb->arch_data = dev; phb->ops = &rtas_pci_ops; phb->buid = get_phb_buid(dev); return 0; } -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - unsigned long __init find_and_init_phbs(void) { struct device_node *node; @@ -397,10 +340,10 @@ unsigned long __init find_and_init_phbs(void) if (node->type == NULL || strcmp(node->type, "pci") != 0) continue; - phb = alloc_phb(node, root_size_cells); + phb = pcibios_alloc_controller(node); if (!phb) continue; - + setup_phb(node, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); #ifdef CONFIG_PPC_PSERIES @@ -446,10 +389,10 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) root_size_cells = prom_n_size_cells(root); primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); + phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - + setup_phb(dn, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, dn, primary); pci_setup_phb_io_dynamic(phb, primary); @@ -505,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) } list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); + pcibios_free_controller(phb); return 0; } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 33e7f2c7f194..bd3eb4292b53 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -59,6 +59,7 @@ #undef DEBUG #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 62dfc5b8d765..30374d2f88e5 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -49,15 +49,16 @@ #include #endif -int smp_hw_index[NR_CPUS]; -struct thread_info *secondary_ti; - #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; + cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b458aaf..de8479769bb7 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* diff --git a/arch/powerpc/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S index c8db993574ee..09629aea3e47 100644 --- a/arch/powerpc/kernel/vdso32/cacheflush.S +++ b/arch/powerpc/kernel/vdso32/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index f6b38472318d..4709f1d9542c 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl __get_datapage@local mtlr r12 @@ -63,6 +62,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) beqlr li r0,__NR_syscalls stw r0,0(r4) + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 0a32a41d50b0..7eebff03a041 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -59,6 +59,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r5,TZONE_TZ_DSTTIME(r11) 1: mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -117,6 +118,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mulli r5,r5,1000 stw r5,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -185,6 +187,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) stw r4,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -219,6 +222,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l diff --git a/arch/powerpc/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index d4a0ad28d534..cb4ae0a5edd0 100644 --- a/arch/powerpc/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index 6393e4137bc7..3b2dd7d0c1eb 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -54,12 +54,12 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl V_LOCAL_FUNC(__get_datapage) mtlr r12 addi r3,r3,CFG_SYSCALL_MAP64 cmpli cr0,r4,0 + crclr cr0*4+so beqlr li r0,__NR_syscalls stw r0,0(r4) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 1a89094715cc..ccaeda5136d1 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -52,6 +52,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r4,TZONE_TZ_MINWEST(r10) stw r5,TZONE_TZ_DSTTIME(r10) 1: mtlr r12 + crclr cr0*4+so li r3,0 /* always success */ blr .cfi_endproc @@ -99,6 +100,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -159,6 +161,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r7,TSPC64_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -193,6 +196,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l diff --git a/arch/powerpc/mm/imalloc.c b/arch/powerpc/mm/imalloc.c index f4ca29cf5364..f9587bcc6a48 100644 --- a/arch/powerpc/mm/imalloc.c +++ b/arch/powerpc/mm/imalloc.c @@ -14,9 +14,10 @@ #include #include #include -#include #include +#include "mmu_decl.h" + static DECLARE_MUTEX(imlist_sem); struct vm_struct * imlist = NULL; diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 1134f70f231d..81cfb0c2ec58 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -64,7 +64,8 @@ #include #include #include -#include + +#include "mmu_decl.h" #ifdef DEBUG #define DBG(fmt...) printk(fmt) diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 9b5aa6808eb8..9584608fd768 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -22,35 +22,38 @@ #include "mmu_decl.h" /* for __max_low_memory */ #endif -struct lmb lmb; - #undef DEBUG +#ifdef DEBUG +#include +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +struct lmb lmb; + void lmb_dump_all(void) { #ifdef DEBUG unsigned long i; - udbg_printf("lmb_dump_all:\n"); - udbg_printf(" memory.cnt = 0x%lx\n", - lmb.memory.cnt); - udbg_printf(" memory.size = 0x%lx\n", - lmb.memory.size); + DBG("lmb_dump_all:\n"); + DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); + DBG(" memory.size = 0x%lx\n", lmb.memory.size); for (i=0; i < lmb.memory.cnt ;i++) { - udbg_printf(" memory.region[0x%x].base = 0x%lx\n", + DBG(" memory.region[0x%x].base = 0x%lx\n", i, lmb.memory.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.memory.region[i].size); } - udbg_printf("\n reserved.cnt = 0x%lx\n", - lmb.reserved.cnt); - udbg_printf(" reserved.size = 0x%lx\n", - lmb.reserved.size); + DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); + DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); for (i=0; i < lmb.reserved.cnt ;i++) { - udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", + DBG(" reserved.region[0x%x].base = 0x%lx\n", i, lmb.reserved.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.reserved.region[i].size); } #endif /* DEBUG */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e2c95fcb8055..4bd7b0a70996 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -200,6 +200,8 @@ void show_mem(void) unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) @@ -336,7 +338,7 @@ void __init mem_init(void) struct page *page; unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; - num_physpages = max_pfn; /* RAM is assumed contiguous */ + num_physpages = lmb.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -348,11 +350,13 @@ void __init mem_init(void) } } #else - max_mapnr = num_physpages; + max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index a4d7a327c0e5..bea2d21ac6f7 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -33,7 +33,6 @@ extern void invalidate_tlbcam_entry(int index); extern int __map_without_bats; extern unsigned long ioremap_base; -extern unsigned long ioremap_bot; extern unsigned int rtas_data, rtas_size; extern PTE *Hash, *Hash_end; @@ -42,6 +41,7 @@ extern unsigned long Hash_size, Hash_mask; extern unsigned int num_tlbcam_entries; #endif +extern unsigned long ioremap_bot; extern unsigned long __max_low_memory; extern unsigned long __initial_memory_limit; extern unsigned long total_memory; @@ -84,4 +84,16 @@ static inline void flush_HPTE(unsigned context, unsigned long va, else _tlbie(va); } +#else /* CONFIG_PPC64 */ +/* imalloc region types */ +#define IM_REGION_UNUSED 0x1 +#define IM_REGION_SUBSET 0x2 +#define IM_REGION_EXISTS 0x4 +#define IM_REGION_OVERLAP 0x8 +#define IM_REGION_SUPERSET 0x10 + +extern struct vm_struct * im_get_free_area(unsigned long size); +extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, + int region_type); +extern void im_free(void *addr); #endif diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bd2cf1336885..f72cf87364cb 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -483,6 +483,7 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); + unsigned int i; printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); @@ -490,7 +491,9 @@ static void __init setup_nonnuma(void) (top_of_ram - total_ram) >> 20); map_cpu_to_node(boot_cpuid, 0); - add_region(0, 0, lmb_end_of_DRAM() >> PAGE_SHIFT); + for (i = 0; i < lmb.memory.cnt; ++i) + add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, + lmb_size_pages(&lmb.memory, i)); node_set_online(0); } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index c7f7bb6f30b3..2ffca63602c5 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -64,7 +64,8 @@ #include #include #include -#include + +#include "mmu_decl.h" unsigned long ioremap_bot = IMALLOC_BASE; static unsigned long phbs_io_bot = PHBS_IO_BASE; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099ddab9205..dda5f2c72c25 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb2315997d45..b616053bc331 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include #include #include +#include static void __devinit smp_chrp_kick_cpu(int nr) { diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535ddb82..737ee5d9f0aa 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 4b75131773a6..dafc518fbb83 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -244,10 +244,9 @@ unsigned long __init find_and_init_phbs(void) if (ret == 0) { printk("bus %d appears to exist\n", bus); - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + phb = pcibios_alloc_controller(NULL); if (phb == NULL) return -ENOMEM; - pci_setup_pci_controller(phb); phb->pci_mem_offset = phb->local_number = bus; phb->first_busno = bus; diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 895aeb3f75d0..f40451da037c 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -326,26 +326,12 @@ static int __init add_bridge(struct device_node *dev) dev->full_name); } - hose = alloc_bootmem(sizeof(struct pci_controller)); + hose = pcibios_alloc_controller(dev); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - disp_name = NULL; if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a8e606..15846cc938ac 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 10f1d942c661..0d7fa00fcb00 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2362,6 +2362,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index dfd41b9781a9..443be526cde7 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -640,15 +640,16 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, + 0x02000000); /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read its configuration register (if any). + * /ht node doesn't expose a "ranges" property, so we "remove" + * regions that have been allocated to AGP. So far, this version of + * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions + * to /ht. We need to fix that sooner or later by either parsing all + * child "ranges" properties or figuring out the U3 address space + * decoding logic and then read its configuration register (if any). */ hose->io_base_phys = 0xf4000000; hose->pci_io_size = 0x00400000; @@ -671,10 +672,10 @@ static void __init setup_u3_ht(struct pci_controller* hose) return; } - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered + /* We "remove" the AGP resources from the resources allocated to HT, + * that is we create "holes". However, that code does assumptions + * that so far happen to be true (cross fingers...), typically that + * resources in the AGP node are properly ordered */ cur = 0; for (i=0; i<3; i++) { @@ -684,23 +685,30 @@ static void __init setup_u3_ht(struct pci_controller* hose) /* We don't care about "fine" resources */ if (res->start >= 0xf0000000) continue; - /* Check if it's just a matter of "shrinking" us in one direction */ + /* Check if it's just a matter of "shrinking" us in one + * direction + */ if (hose->mem_resources[cur].start == res->start) { DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); + cur, hose->mem_resources[cur].start, + res->end + 1); hose->mem_resources[cur].start = res->end + 1; continue; } if (hose->mem_resources[cur].end == res->end) { DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); + cur, hose->mem_resources[cur].end, + res->start - 1); hose->mem_resources[cur].end = res->start - 1; continue; } /* No, it's not the case, we need a hole */ if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); + /* not enough resources for a hole, we drop part + * of the range + */ + printk(KERN_WARNING "Running out of resources" + " for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } @@ -714,17 +722,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->mem_resources[cur-1].end = res->start - 1; } } - -/* XXX this needs to be converged between ppc32 and ppc64... */ -static struct pci_controller * __init pcibios_alloc_controller(void) -{ - struct pci_controller *hose; - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose) - pci_setup_pci_controller(hose); - return hose; -} #endif /* @@ -756,11 +753,16 @@ static int __init add_bridge(struct device_node *dev) #endif bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); } + /* XXX Different prototypes, to be merged */ +#ifdef CONFIG_PPC64 + hose = pcibios_alloc_controller(dev); +#else hose = pcibios_alloc_controller(); +#endif if (!hose) return -ENOMEM; hose->arch_data = dev; @@ -768,7 +770,7 @@ static int __init add_bridge(struct device_node *dev) hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index 957b09103422..fb2a7c798e82 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -631,8 +632,9 @@ void smp_core99_give_timebase(void) mb(); /* wait for the secondary to have taken it */ - for (t = 100000; t > 0 && sec_tb_reset; --t) - udelay(10); + /* note: can't use udelay here, since it needs the timebase running */ + for (t = 10000000; t > 0 && sec_tb_reset; --t) + barrier(); if (sec_tb_reset) /* XXX BUG_ON here? */ printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n"); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de2310e70b..c8d2a40dc5b4 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b2e06..4a465f067ede 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 5800cde7d5ad..25181c594d73 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -51,6 +51,7 @@ #include "plpar_wrappers.h" #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 105f05341a41..58d1cc2023c8 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -361,7 +361,8 @@ static void mpic_enable_irq(unsigned int irq) DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & ~MPIC_VECPRI_MASK); + mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & + ~MPIC_VECPRI_MASK); /* make sure mask gets to controller before we return to user */ do { @@ -381,7 +382,8 @@ static void mpic_disable_irq(unsigned int irq) DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | MPIC_VECPRI_MASK); + mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | + MPIC_VECPRI_MASK); /* make sure mask gets to controller before we return to user */ do { @@ -735,12 +737,13 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) { - reg = mpic_ipi_read(irq - mpic->ipi_offset) & MPIC_VECPRI_PRIORITY_MASK; + reg = mpic_ipi_read(irq - mpic->ipi_offset) & + ~MPIC_VECPRI_PRIORITY_MASK; mpic_ipi_write(irq - mpic->ipi_offset, reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } else { - reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI) - & MPIC_VECPRI_PRIORITY_MASK; + reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI) + & ~MPIC_VECPRI_PRIORITY_MASK; mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI, reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 17a4da65e275..0bb23fce4293 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-$(CONFIG_POWER4) += idle_power4.o extra-y += vmlinux.lds obj-y := entry.o traps.o idle.o time.o misc.o \ - process.o align.o \ + process.o \ setup.o \ ppc_htab.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o @@ -38,7 +38,7 @@ endif # These are here while we do the architecture merge else -obj-y := idle.o align.o +obj-y := idle.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o diff --git a/arch/ppc/kernel/align.c b/arch/ppc/kernel/align.c deleted file mode 100644 index ab398c4b70b6..000000000000 --- a/arch/ppc/kernel/align.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * align.c - handle alignment exceptions for the Power PC. - * - * Copyright (c) 1996 Paul Mackerras - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson - * PowerPC 403GCX/405GP modifications. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -struct aligninfo { - unsigned char len; - unsigned char flags; -}; - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) -#define OPCD(inst) (((inst) & 0xFC000000) >> 26) -#define RS(inst) (((inst) & 0x03E00000) >> 21) -#define RA(inst) (((inst) & 0x001F0000) >> 16) -#define IS_XFORM(code) ((code) == 31) -#endif - -#define INVALID { 0, 0 } - -#define LD 1 /* load */ -#define ST 2 /* store */ -#define SE 4 /* sign-extend value */ -#define F 8 /* to/from fp regs */ -#define U 0x10 /* update index register */ -#define M 0x20 /* multiple load/store */ -#define S 0x40 /* single-precision fp, or byte-swap value */ -#define SX 0x40 /* byte count in XER */ -#define HARD 0x80 /* string, stwcx. */ - -#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ - -/* - * The PowerPC stores certain bits of the instruction that caused the - * alignment exception in the DSISR register. This array maps those - * bits to information about the operand length and what the - * instruction would do. - */ -static struct aligninfo aligninfo[128] = { - { 4, LD }, /* 00 0 0000: lwz / lwarx */ - INVALID, /* 00 0 0001 */ - { 4, ST }, /* 00 0 0010: stw */ - INVALID, /* 00 0 0011 */ - { 2, LD }, /* 00 0 0100: lhz */ - { 2, LD+SE }, /* 00 0 0101: lha */ - { 2, ST }, /* 00 0 0110: sth */ - { 4, LD+M }, /* 00 0 0111: lmw */ - { 4, LD+F+S }, /* 00 0 1000: lfs */ - { 8, LD+F }, /* 00 0 1001: lfd */ - { 4, ST+F+S }, /* 00 0 1010: stfs */ - { 8, ST+F }, /* 00 0 1011: stfd */ - INVALID, /* 00 0 1100 */ - INVALID, /* 00 0 1101: ld/ldu/lwa */ - INVALID, /* 00 0 1110 */ - INVALID, /* 00 0 1111: std/stdu */ - { 4, LD+U }, /* 00 1 0000: lwzu */ - INVALID, /* 00 1 0001 */ - { 4, ST+U }, /* 00 1 0010: stwu */ - INVALID, /* 00 1 0011 */ - { 2, LD+U }, /* 00 1 0100: lhzu */ - { 2, LD+SE+U }, /* 00 1 0101: lhau */ - { 2, ST+U }, /* 00 1 0110: sthu */ - { 4, ST+M }, /* 00 1 0111: stmw */ - { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ - { 8, LD+F+U }, /* 00 1 1001: lfdu */ - { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ - { 8, ST+F+U }, /* 00 1 1011: stfdu */ - INVALID, /* 00 1 1100 */ - INVALID, /* 00 1 1101 */ - INVALID, /* 00 1 1110 */ - INVALID, /* 00 1 1111 */ - INVALID, /* 01 0 0000: ldx */ - INVALID, /* 01 0 0001 */ - INVALID, /* 01 0 0010: stdx */ - INVALID, /* 01 0 0011 */ - INVALID, /* 01 0 0100 */ - INVALID, /* 01 0 0101: lwax */ - INVALID, /* 01 0 0110 */ - INVALID, /* 01 0 0111 */ - { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ - { 4, LD+M+HARD }, /* 01 0 1001: lswi */ - { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ - { 4, ST+M+HARD }, /* 01 0 1011: stswi */ - INVALID, /* 01 0 1100 */ - INVALID, /* 01 0 1101 */ - INVALID, /* 01 0 1110 */ - INVALID, /* 01 0 1111 */ - INVALID, /* 01 1 0000: ldux */ - INVALID, /* 01 1 0001 */ - INVALID, /* 01 1 0010: stdux */ - INVALID, /* 01 1 0011 */ - INVALID, /* 01 1 0100 */ - INVALID, /* 01 1 0101: lwaux */ - INVALID, /* 01 1 0110 */ - INVALID, /* 01 1 0111 */ - INVALID, /* 01 1 1000 */ - INVALID, /* 01 1 1001 */ - INVALID, /* 01 1 1010 */ - INVALID, /* 01 1 1011 */ - INVALID, /* 01 1 1100 */ - INVALID, /* 01 1 1101 */ - INVALID, /* 01 1 1110 */ - INVALID, /* 01 1 1111 */ - INVALID, /* 10 0 0000 */ - INVALID, /* 10 0 0001 */ - { 0, ST+HARD }, /* 10 0 0010: stwcx. */ - INVALID, /* 10 0 0011 */ - INVALID, /* 10 0 0100 */ - INVALID, /* 10 0 0101 */ - INVALID, /* 10 0 0110 */ - INVALID, /* 10 0 0111 */ - { 4, LD+S }, /* 10 0 1000: lwbrx */ - INVALID, /* 10 0 1001 */ - { 4, ST+S }, /* 10 0 1010: stwbrx */ - INVALID, /* 10 0 1011 */ - { 2, LD+S }, /* 10 0 1100: lhbrx */ - INVALID, /* 10 0 1101 */ - { 2, ST+S }, /* 10 0 1110: sthbrx */ - INVALID, /* 10 0 1111 */ - INVALID, /* 10 1 0000 */ - INVALID, /* 10 1 0001 */ - INVALID, /* 10 1 0010 */ - INVALID, /* 10 1 0011 */ - INVALID, /* 10 1 0100 */ - INVALID, /* 10 1 0101 */ - INVALID, /* 10 1 0110 */ - INVALID, /* 10 1 0111 */ - INVALID, /* 10 1 1000 */ - INVALID, /* 10 1 1001 */ - INVALID, /* 10 1 1010 */ - INVALID, /* 10 1 1011 */ - INVALID, /* 10 1 1100 */ - INVALID, /* 10 1 1101 */ - INVALID, /* 10 1 1110 */ - { 0, ST+HARD }, /* 10 1 1111: dcbz */ - { 4, LD }, /* 11 0 0000: lwzx */ - INVALID, /* 11 0 0001 */ - { 4, ST }, /* 11 0 0010: stwx */ - INVALID, /* 11 0 0011 */ - { 2, LD }, /* 11 0 0100: lhzx */ - { 2, LD+SE }, /* 11 0 0101: lhax */ - { 2, ST }, /* 11 0 0110: sthx */ - INVALID, /* 11 0 0111 */ - { 4, LD+F+S }, /* 11 0 1000: lfsx */ - { 8, LD+F }, /* 11 0 1001: lfdx */ - { 4, ST+F+S }, /* 11 0 1010: stfsx */ - { 8, ST+F }, /* 11 0 1011: stfdx */ - INVALID, /* 11 0 1100 */ - INVALID, /* 11 0 1101: lmd */ - INVALID, /* 11 0 1110 */ - INVALID, /* 11 0 1111: stmd */ - { 4, LD+U }, /* 11 1 0000: lwzux */ - INVALID, /* 11 1 0001 */ - { 4, ST+U }, /* 11 1 0010: stwux */ - INVALID, /* 11 1 0011 */ - { 2, LD+U }, /* 11 1 0100: lhzux */ - { 2, LD+SE+U }, /* 11 1 0101: lhaux */ - { 2, ST+U }, /* 11 1 0110: sthux */ - INVALID, /* 11 1 0111 */ - { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ - { 8, LD+F+U }, /* 11 1 1001: lfdux */ - { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ - { 8, ST+F+U }, /* 11 1 1011: stfdux */ - INVALID, /* 11 1 1100 */ - INVALID, /* 11 1 1101 */ - INVALID, /* 11 1 1110 */ - INVALID, /* 11 1 1111 */ -}; - -#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) - -int -fix_alignment(struct pt_regs *regs) -{ - int instr, nb, flags; -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - int opcode, f1, f2, f3; -#endif - int i, t; - int reg, areg; - int offset, nb0; - unsigned char __user *addr; - unsigned char *rptr; - union { - long l; - float f; - double d; - unsigned char v[8]; - } data; - - CHECK_FULL_REGS(regs); - -#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE) - /* The 4xx-family & Book-E processors have no DSISR register, - * so we emulate it. - * The POWER4 has a DSISR register but doesn't set it on - * an alignment fault. -- paulus - */ - - if (__get_user(instr, (unsigned int __user *) regs->nip)) - return 0; - opcode = OPCD(instr); - reg = RS(instr); - areg = RA(instr); - - if (!IS_XFORM(opcode)) { - f1 = 0; - f2 = (instr & 0x04000000) >> 26; - f3 = (instr & 0x78000000) >> 27; - } else { - f1 = (instr & 0x00000006) >> 1; - f2 = (instr & 0x00000040) >> 6; - f3 = (instr & 0x00000780) >> 7; - } - - instr = ((f1 << 5) | (f2 << 4) | f3); -#else - reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */ - areg = regs->dsisr & 0x1f; /* register to update */ - instr = (regs->dsisr >> 10) & 0x7f; -#endif - - nb = aligninfo[instr].len; - if (nb == 0) { - long __user *p; - int i; - - if (instr != DCBZ) - return 0; /* too hard or invalid instruction */ - /* - * The dcbz (data cache block zero) instruction - * gives an alignment fault if used on non-cacheable - * memory. We handle the fault mainly for the - * case when we are running with the cache disabled - * for debugging. - */ - p = (long __user *) (regs->dar & -L1_CACHE_BYTES); - if (user_mode(regs) - && !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES)) - return -EFAULT; - for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i) - if (__put_user(0, p+i)) - return -EFAULT; - return 1; - } - - flags = aligninfo[instr].flags; - if ((flags & (LD|ST)) == 0) - return 0; - - /* For the 4xx-family & Book-E processors, the 'dar' field of the - * pt_regs structure is overloaded and is really from the DEAR. - */ - - addr = (unsigned char __user *)regs->dar; - - if (flags & M) { - /* lmw, stmw, lswi/x, stswi/x */ - nb0 = 0; - if (flags & HARD) { - if (flags & SX) { - nb = regs->xer & 127; - if (nb == 0) - return 1; - } else { - if (__get_user(instr, - (unsigned int __user *)regs->nip)) - return 0; - nb = (instr >> 11) & 0x1f; - if (nb == 0) - nb = 32; - } - if (nb + reg * 4 > 128) { - nb0 = nb + reg * 4 - 128; - nb = 128 - reg * 4; - } - } else { - /* lwm, stmw */ - nb = (32 - reg) * 4; - } - - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) - return -EFAULT; /* bad address */ - - rptr = (unsigned char *) ®s->gpr[reg]; - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__get_user(rptr[i], addr+i)) - return -EFAULT; - } - for (; (i & 3) != 0; ++i) - rptr[i] = 0; - } else { - for (i = 0; i < nb; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - if (nb0 > 0) { - rptr = (unsigned char *) ®s->gpr[0]; - addr += nb; - for (i = 0; i < nb0; ++i) - if (__put_user(rptr[i], addr+i)) - return -EFAULT; - } - } - return 1; - } - - offset = 0; - if (nb < 4) { - /* read/write the least significant bits */ - data.l = 0; - offset = 4 - nb; - } - - /* Verify the address of the operand */ - if (user_mode(regs)) { - if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb)) - return -EFAULT; /* bad address */ - } - - if (flags & F) { - preempt_disable(); - if (regs->msr & MSR_FP) - giveup_fpu(current); - preempt_enable(); - } - - /* If we read the operand, copy it in, else get register values */ - if (flags & LD) { - for (i = 0; i < nb; ++i) - if (__get_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - data.d = current->thread.fpr[reg]; - } else { - data.l = regs->gpr[reg]; - } - - switch (flags & ~U) { - case LD+SE: /* sign extend */ - if (data.v[2] >= 0x80) - data.v[0] = data.v[1] = -1; - break; - - case LD+S: /* byte-swap */ - case ST+S: - if (nb == 2) { - SWAP(data.v[2], data.v[3]); - } else { - SWAP(data.v[0], data.v[3]); - SWAP(data.v[1], data.v[2]); - } - break; - - /* Single-precision FP load and store require conversions... */ - case LD+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_fd(&data.f, &data.d, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - case ST+F+S: -#ifdef CONFIG_PPC_FPU - preempt_disable(); - enable_kernel_fp(); - cvt_df(&data.d, &data.f, ¤t->thread); - preempt_enable(); -#else - return 0; -#endif - break; - } - - if (flags & ST) { - for (i = 0; i < nb; ++i) - if (__put_user(data.v[offset+i], addr+i)) - return -EFAULT; - } else if (flags & F) { - current->thread.fpr[reg] = data.d; - } else { - regs->gpr[reg] = data.l; - } - - if (flags & U) - regs->gpr[areg] = regs->dar; - - return 1; -} diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c index 48ed58f995c0..f7fae5f153b2 100644 --- a/arch/ppc/kernel/pci.c +++ b/arch/ppc/kernel/pci.c @@ -45,7 +45,6 @@ static void update_bridge_base(struct pci_bus *bus, int i); static void pcibios_fixup_resources(struct pci_dev* dev); static void fixup_broken_pcnet32(struct pci_dev* dev); static int reparent_resources(struct resource *parent, struct resource *res); -static void fixup_rev1_53c810(struct pci_dev* dev); static void fixup_cpc710_pci64(struct pci_dev* dev); #ifdef CONFIG_PPC_OF static u8* pci_to_OF_bus_map; diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index dc55e1abc45b..0eb0b7085e6a 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -602,7 +602,19 @@ void parse_bootinfo(struct bi_record *rec) #endif /* CONFIG_BLK_DEV_INITRD */ #ifdef CONFIG_PPC_MULTIPLATFORM case BI_MACHTYPE: - _machine = data[0]; + /* Machine types changed with the merge. Since the + * bootinfo are now deprecated, we can just hard code + * the appropriate conversion here for when we are + * called with yaboot which passes us a machine type + * this way. + */ + switch(data[0]) { + case 1: _machine = _MACH_prep; break; + case 2: _machine = _MACH_Pmac; break; + case 4: _machine = _MACH_chrp; break; + default: + _machine = data[0]; + } break; #endif case BI_MEMSIZE: diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 99b48abd3296..45f0782059f1 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -597,21 +597,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); +#ifdef CONFIG_8xx + /* On 8xx, the TLB handlers work in 2 stages: + * First, a zeroed entry is loaded by TLBMiss handler, + * which causes the TLBError handler to be triggered. + * That means the zeroed TLB has to be invalidated + * whenever a page miss occurs. + */ + _tlbie(address); +#endif if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { - if (vma->vm_mm == current->active_mm) { -#ifdef CONFIG_8xx - /* On 8xx, cache control instructions (particularly - * "dcbst" from flush_dcache_icache) fault as write - * operation if there is an unpopulated TLB entry - * for the address in question. To workaround that, - * we invalidate the TLB here, thus avoiding dcbst - * misbehaviour. - */ - _tlbie(address); -#endif + if (vma->vm_mm == current->active_mm) __flush_dcache_icache((void *) address); - } else + else flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h index 7b26bcc5d10d..198a6a02cde8 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h @@ -25,6 +25,8 @@ #define BCSR_ADDR ((uint)0xf8000000) #define BCSR_SIZE ((uint)(32 * 1024)) +struct seq_file; + extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); extern void mpc85xx_ads_init_IRQ(void) __init; extern void mpc85xx_ads_map_io(void) __init; diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h index 7bcc6c35a417..2f25b5195152 100644 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ b/arch/ppc/platforms/85xx/stx_gp3.h @@ -21,7 +21,6 @@ #include #include -#include #include #define BOARD_CCSRBAR ((uint)0xe0000000) @@ -43,7 +42,6 @@ extern void mpc85xx_setup_hose(void) __init; extern void mpc85xx_restart(char *cmd); extern void mpc85xx_power_off(void); extern void mpc85xx_halt(void); -extern int mpc85xx_show_cpuinfo(struct seq_file *m); extern void mpc85xx_init_IRQ(void) __init; extern unsigned long mpc85xx_find_end_of_memory(void) __init; extern void mpc85xx_calibrate_decr(void) __init; diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c index a1523989aff4..82cf3ab77f4a 100644 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ b/arch/ppc/syslib/mpc83xx_sys.c @@ -69,9 +69,33 @@ struct ppc_sys_spec ppc_sys_specs[] = { }, }, { - .ppc_sys_name = "8343E", + .ppc_sys_name = "8347E", .mask = 0xFFFF0000, .value = 0x80540000, + .num_devices = 9, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8347", + .mask = 0xFFFF0000, + .value = 0x80550000, + .num_devices = 8, + .device_list = (enum ppc_sys_devices[]) + { + MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, + MPC83xx_IIC2, MPC83xx_DUART, + MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO + }, + }, + { + .ppc_sys_name = "8343E", + .mask = 0xFFFF0000, + .value = 0x80560000, .num_devices = 8, .device_list = (enum ppc_sys_devices[]) { @@ -83,7 +107,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { .ppc_sys_name = "8343", .mask = 0xFFFF0000, - .value = 0x80550000, + .value = 0x80570000, .num_devices = 7, .device_list = (enum ppc_sys_devices[]) { diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 98612d420346..c80177f8ec04 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -184,7 +184,9 @@ xmon_map_scc(void) sccc = base + (addr & ~PAGE_MASK); sccd = sccc + 0x10; - } else { + } +#ifdef CONFIG_PPC_CHRP + else { base = (volatile unsigned char *) isa_io_base; if (_machine == _MACH_chrp) base = (volatile unsigned char *) @@ -200,6 +202,7 @@ xmon_map_scc(void) RXRDY = 1; DLAB = 0x80; } +#endif /* CONFIG_PPC_CHRP */ #elif defined(CONFIG_GEMINI) /* should already be mapped by the kernel boot */ sccc = (volatile unsigned char *) 0xffeffb0d; diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug deleted file mode 100644 index b258c9314a1b..000000000000 --- a/arch/ppc64/Kconfig.debug +++ /dev/null @@ -1,65 +0,0 @@ -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config DEBUG_STACKOVERFLOW - bool "Check for stack overflows" - depends on DEBUG_KERNEL - help - This option will cause messages to be printed if free stack space - drops below a certain limit. - -config KPROBES - bool "Kprobes" - depends on DEBUG_KERNEL - help - Kprobes allows you to trap at almost any kernel address and - execute a callback function. register_kprobe() establishes - a probepoint and specifies the callback. Kprobes is useful - for kernel debugging, non-intrusive instrumentation and testing. - If in doubt, say "N". - -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUGGER - bool "Enable debugger hooks" - depends on DEBUG_KERNEL - help - Include in-kernel hooks for kernel debuggers. Unless you are - intending to debug the kernel, say N here. - -config XMON - bool "Include xmon kernel debugger" - depends on DEBUGGER && !PPC_ISERIES - help - Include in-kernel hooks for the xmon kernel monitor/debugger. - Unless you are intending to debug the kernel, say N here. - Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise - nothing will appear on the screen (xmon writes directly to the - framebuffer memory). - The cmdline option 'xmon' or 'xmon=early' will drop into xmon very - early during boot. 'xmon=on' will just enable the xmon debugger hooks. - 'xmon=off' will disable the debugger hooks if CONFIG_XMON_DEFAULT is set. - -config XMON_DEFAULT - bool "Enable xmon by default" - depends on XMON - help - xmon is normally disabled unless booted with 'xmon=on'. - Use 'xmon=off' to disable xmon init during runtime. - -config IRQSTACKS - bool "Use separate kernel stacks when processing interrupts" - help - If you say Y here the kernel will use separate kernel stacks - for handling hard and soft interrupts. This can help avoid - overflowing the process kernel stacks. - -endmenu diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile deleted file mode 100644 index a55a82d145d4..000000000000 --- a/arch/ppc64/Makefile +++ /dev/null @@ -1,142 +0,0 @@ -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# Changes for PPC by Gary Thomas -# Rewritten by Cort Dougan and Paul Mackerras -# Adjusted for PPC64 by Tom Gall -# - -KERNELLOAD := 0xc000000000000000 - -# Set default 32 bits cross compilers for vdso and boot wrapper -CROSS32_COMPILE ?= - -CROSS32CC := $(CROSS32_COMPILE)gcc -CROSS32AS := $(CROSS32_COMPILE)as -CROSS32LD := $(CROSS32_COMPILE)ld -CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy - -# If we have a biarch compiler, use it for 32 bits cross compile if -# CROSS32_COMPILE wasn't explicitely defined, and add proper explicit -# target type to target compilers - -HAS_BIARCH := $(call cc-option-yn, -m64) -ifeq ($(HAS_BIARCH),y) -ifeq ($(CROSS32_COMPILE),) -CROSS32CC := $(CC) -m32 -CROSS32AS := $(AS) -a32 -CROSS32LD := $(LD) -m elf32ppc -CROSS32OBJCOPY := $(OBJCOPY) -endif -override AS += -a64 -override LD += -m elf64ppc -override CC += -m64 -endif - -export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY - -new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) - -ifeq ($(new_nm),y) -NM := $(NM) --synthetic - -endif - -CHECKFLAGS += -m64 -D__powerpc__ -D__powerpc64__ - -LDFLAGS := -m elf64ppc -LDFLAGS_vmlinux := -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD) -CFLAGS += -msoft-float -pipe -mminimal-toc -mtraceback=none \ - -mcall-aixdesc -# Temporary hack until we have migrated to asm-powerpc -CPPFLAGS += -Iarch/$(ARCH)/include - -GCC_VERSION := $(call cc-version) -GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;) - -ifeq ($(CONFIG_POWER4_ONLY),y) -ifeq ($(CONFIG_ALTIVEC),y) -ifeq ($(GCC_BROKEN_VEC),y) - CFLAGS += $(call cc-option,-mcpu=970) -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mcpu=power4) -endif -else - CFLAGS += $(call cc-option,-mtune=power4) -endif - -# No AltiVec instruction when building kernel -CFLAGS += $(call cc-option, -mno-altivec) - -# Enable unit-at-a-time mode when possible. It shrinks the -# kernel considerably. -CFLAGS += $(call cc-option,-funit-at-a-time) - -head-y := arch/ppc64/kernel/head.o -head-y += arch/powerpc/kernel/fpu.o -head-y += arch/powerpc/kernel/entry_64.o - -core-y += arch/ppc64/kernel/ arch/powerpc/kernel/ -core-y += arch/powerpc/mm/ -core-y += arch/powerpc/sysdev/ -core-y += arch/powerpc/platforms/ -core-y += arch/powerpc/lib/ -core-$(CONFIG_XMON) += arch/powerpc/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ - -boot := arch/ppc64/boot - -boottargets-$(CONFIG_PPC_PSERIES) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_PMAC) += zImage.vmode zImage.initrd.vmode -boottargets-$(CONFIG_PPC_MAPLE) += zImage zImage.initrd -boottargets-$(CONFIG_PPC_ISERIES) += vmlinux.sminitrd vmlinux.initrd vmlinux.sm -boottargets-$(CONFIG_PPC_BPA) += zImage zImage.initrd -$(boottargets-y): vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ - -bootimage-$(CONFIG_PPC_PSERIES) := $(boot)/zImage -bootimage-$(CONFIG_PPC_PMAC) := vmlinux -bootimage-$(CONFIG_PPC_MAPLE) := $(boot)/zImage -bootimage-$(CONFIG_PPC_BPA) := $(boot)/zImage -bootimage-$(CONFIG_PPC_ISERIES) := vmlinux -BOOTIMAGE := $(bootimage-y) -install: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -defaultimage-$(CONFIG_PPC_PSERIES) := zImage -defaultimage-$(CONFIG_PPC_PMAC) := zImage.vmode -defaultimage-$(CONFIG_PPC_MAPLE) := zImage -defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux -KBUILD_IMAGE := $(defaultimage-y) -all: $(KBUILD_IMAGE) - -archclean: - $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc - $(Q)rm -rf arch/$(ARCH)/include - - -# Temporary hack until we have migrated to asm-powerpc -include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: - $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi - $(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm - -define archhelp - echo ' zImage.vmode - Compressed kernel image (arch/$(ARCH)/boot/zImage.vmode)' - echo ' zImage.initrd.vmode - Compressed kernel image with initrd attached,' - echo ' sourced from arch/$(ARCH)/boot/ramdisk.image.gz' - echo ' (arch/$(ARCH)/boot/zImage.initrd.vmode)' - echo ' zImage - zImage for pSeries machines' - echo ' zImage.initrd - zImage with initrd for pSeries machines' -endef diff --git a/arch/ppc64/configs/bpa_defconfig b/arch/ppc64/configs/bpa_defconfig deleted file mode 100644 index 67ffecbc05cb..000000000000 --- a/arch/ppc64/configs/bpa_defconfig +++ /dev/null @@ -1,1024 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -# CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=y -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=y -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=y -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=m -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINK is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_STALDRV is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -CONFIG_EFI_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -CONFIG_DEBUGGER=y -# CONFIG_XMON is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig deleted file mode 100644 index 6323065fbf2c..000000000000 --- a/arch/ppc64/configs/g5_defconfig +++ /dev/null @@ -1,1392 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:23 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -CONFIG_PPC_PMAC=y -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_PPC_PMAC64=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG_CPU is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -CONFIG_SCSI_SATA_SVW=y -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -CONFIG_IEEE1394_OUI_DB=y -CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y -CONFIG_IEEE1394_CONFIG_ROM_IP1394=y -# CONFIG_IEEE1394_EXPORT_FULL_API is not set - -# -# Device Drivers -# -# CONFIG_IEEE1394_PCILYNX is not set -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocol Drivers -# -CONFIG_IEEE1394_VIDEO1394=m -CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -CONFIG_IEEE1394_ETH1394=m -CONFIG_IEEE1394_DV1394=m -CONFIG_IEEE1394_RAWIO=y -# CONFIG_IEEE1394_CMP is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -CONFIG_ADB_PMU=y -CONFIG_PMAC_SMU=y -CONFIG_THERM_PM72=y - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -CONFIG_SUNGEM=y -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -CONFIG_TIGON3=m -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_PMACZILOG is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_AGP_UNINORTH=m -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_KEYWEST=y -CONFIG_I2C_PMAC_SMU=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -CONFIG_FB_RIVA=y -# CONFIG_FB_RIVA_I2C is not set -# CONFIG_FB_RIVA_DEBUG is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -# CONFIG_USB_STORAGE_ONETOUCH is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -CONFIG_HID_FF=y -CONFIG_HID_PID=y -CONFIG_LOGITECH_FF=y -CONFIG_THRUSTMASTER_FF=y -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_AX8817X is not set -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_NET1080 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig deleted file mode 100644 index 62e92c7e9e27..000000000000 --- a/arch/ppc64/configs/iSeries_defconfig +++ /dev/null @@ -1,998 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -CONFIG_PPC_ISERIES=y -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=m -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_ISERIES_VETH=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=m -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# iSeries device drivers -# -CONFIG_VIOCONS=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -CONFIG_VIOPATH=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig deleted file mode 100644 index 7b480f3d1406..000000000000 --- a/arch/ppc64/configs/maple_defconfig +++ /dev/null @@ -1,1062 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -# CONFIG_CPUSETS is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y -CONFIG_U3_DART=y -CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set -# CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_IDE_TASK_IOCTL=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -CONFIG_I2C_AMD8111=y -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_STORAGE is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=y -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_BELKIN is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FTDI_SIO is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_PL2303 is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_SAFE is not set -CONFIG_USB_SERIAL_TI=m -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_SERIAL_OMNINET is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -CONFIG_DEBUG_SLAB=y -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_SPINLOCK_SLEEP=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -# CONFIG_IRQSTACKS is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig deleted file mode 100644 index 9f09dff9e11a..000000000000 --- a/arch/ppc64/configs/pSeries_defconfig +++ /dev/null @@ -1,1371 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 -# -CONFIG_64BIT=y -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_EARLY_PRINTK=y -CONFIG_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_CPUSETS=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y -CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y - -# -# Platform support -# -# CONFIG_PPC_ISERIES is not set -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set -# CONFIG_PPC_PMAC is not set -# CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y -CONFIG_PPC_OF=y -CONFIG_XICS=y -CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y -CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set -CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y -CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus Options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -CONFIG_HOTPLUG_PCI=m -# CONFIG_HOTPLUG_PCI_FAKE is not set -# CONFIG_HOTPLUG_PCI_CPCI is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -CONFIG_HOTPLUG_PCI_RPA=m -CONFIG_HOTPLUG_PCI_RPA_DLPAR=m - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=y -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_NETLINK=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_NFQUEUE=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_SERIAL is not set -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -CONFIG_BLK_DEV_FD=m -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_SL82C105=y -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -CONFIG_SCSI_IBMVSCSI=y -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set -CONFIG_SCSI_IPR=y -CONFIG_SCSI_IPR_TRACE=y -CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA6312=m -CONFIG_SCSI_QLA24XX=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_IBMVETH=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# -CONFIG_ACENIC=y -CONFIG_ACENIC_OMIT_TIGON_I=y -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_TIGON3=y -# CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_IXGB=m -# CONFIG_IXGB_NAPI is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set - -# -# Token Ring devices -# -CONFIG_TR=y -CONFIG_IBMOL=y -# CONFIG_3C359 is not set -# CONFIG_TMS380TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -CONFIG_INPUT_PCSPKR=m -# CONFIG_INPUT_UINPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_ICOM=m -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set -CONFIG_HVC_CONSOLE=y -CONFIG_HVCS=m - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=1024 -# CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -CONFIG_FB_MACMODES=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_VGA16 is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -# CONFIG_FB_MATROX_I2C is not set -CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set -CONFIG_FB_RADEON=y -CONFIG_FB_RADEON_I2C=y -# CONFIG_FB_RADEON_DEBUG is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_CYBLA is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# -# CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -CONFIG_INFINIBAND=m -# CONFIG_INFINIBAND_USER_MAD is not set -# CONFIG_INFINIBAND_USER_ACCESS is not set -CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y -# CONFIG_XFS_QUOTA is not set -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -CONFIG_RPCSEC_GSS_SPKM3=m -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=17 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_DEBUGGER=y -CONFIG_XMON=y -CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set -CONFIG_IRQSTACKS=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile deleted file mode 100644 index e876c213f5ce..000000000000 --- a/arch/ppc64/kernel/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the linux ppc64 kernel. -# - -obj-y += idle.o align.o - -obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o diff --git a/block/as-iosched.c b/block/as-iosched.c index a78e160b59a3..fbe050124ec5 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -1,6 +1,4 @@ /* - * linux/drivers/block/as-iosched.c - * * Anticipatory & deadline i/o scheduler. * * Copyright (C) 2002 Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 2b64f5852bfd..ee0bb41694b0 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1,6 +1,4 @@ /* - * linux/drivers/block/cfq-iosched.c - * * CFQ, or complete fairness queueing, disk scheduler. * * Based on ideas from a previously unfinished io diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c index 7929471d7df7..9cbec09e8415 100644 --- a/block/deadline-iosched.c +++ b/block/deadline-iosched.c @@ -1,6 +1,4 @@ /* - * linux/drivers/block/deadline-iosched.c - * * Deadline i/o scheduler. * * Copyright (C) 2002 Jens Axboe diff --git a/block/elevator.c b/block/elevator.c index e4c58827bb46..6c3fc8a10bf2 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -1,6 +1,4 @@ /* - * linux/drivers/block/elevator.c - * * Block device elevator/IO-scheduler. * * Copyright (C) 2000 Andrea Arcangeli SuSE diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index 5f52e30b43f8..99c9ca6d5992 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1,6 +1,4 @@ /* - * linux/drivers/block/ll_rw_blk.c - * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1994, Karl Keyte: Added support for disk statistics * Elevator latency, (C) 2000 Andrea Arcangeli SuSE diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 573b6a97bb1f..70d8a6ec0920 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -514,8 +514,6 @@ static int acpi_processor_set_power_policy(struct acpi_processor *pr) static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_fadt"); if (!pr) @@ -524,8 +522,7 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) if (!pr->pblk) return_VALUE(-ENODEV); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(pr->power.states, 0, sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -555,13 +552,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) static int acpi_processor_get_power_info_default_c1(struct acpi_processor *pr) { - int i; - ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1"); - for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++) - memset(&(pr->power.states[i]), 0, - sizeof(struct acpi_processor_cx)); + memset(pr->power.states, 0, sizeof(pr->power.states)); /* if info is obtained from pblk/fadt, type equals state */ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1; @@ -873,7 +866,8 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { if (pr->power.states[i].valid) { pr->power.count = i; - pr->flags.power = 1; + if (pr->power.states[i].type >= ACPI_STATE_C2) + pr->flags.power = 1; } } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e239a6c29230..a9e33db46e68 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1017,10 +1017,11 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, status = -ENOMEM; goto cleanup1; } - if (ioc->Request.Type.Direction == XFER_WRITE && - copy_from_user(buff[sg_used], data_ptr, sz)) { + if (ioc->Request.Type.Direction == XFER_WRITE) { + if (copy_from_user(buff[sg_used], data_ptr, sz)) { status = -ENOMEM; - goto cleanup1; + goto cleanup1; + } } else { memset(buff[sg_used], 0, sz); } @@ -1138,8 +1139,15 @@ static int revalidate_allvol(ctlr_info_t *host) for(i=0; i< NWD; i++) { struct gendisk *disk = host->gendisk[i]; - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); + if (disk) { + request_queue_t *q = disk->queue; + + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (q) + blk_cleanup_queue(q); + put_disk(disk); + } } /* @@ -1453,10 +1461,13 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, * allows us to delete disk zero but keep the controller registered. */ if (h->gendisk[0] != disk){ - if (disk->flags & GENHD_FL_UP){ - blk_cleanup_queue(disk->queue); - del_gendisk(disk); - drv->queue = NULL; + if (disk) { + request_queue_t *q = disk->queue; + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (q) + blk_cleanup_queue(q); + put_disk(disk); } } @@ -3225,9 +3236,14 @@ static void __devexit cciss_remove_one (struct pci_dev *pdev) /* remove it from the disk list */ for (j = 0; j < NWD; j++) { struct gendisk *disk = hba[i]->gendisk[j]; - if (disk->flags & GENHD_FL_UP) { - del_gendisk(disk); - blk_cleanup_queue(disk->queue); + if (disk) { + request_queue_t *q = disk->queue; + + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + if (q) + blk_cleanup_queue(q); + put_disk(disk); } } diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index ea89dca3dbb5..01a1f6badb53 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2203,7 +2203,7 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { - if (smi_info->thread != ERR_PTR(-ENOMEM)) + if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM)) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); } diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index b58adfe3ed19..a6873bf89ffa 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -6,7 +6,7 @@ menu "TPM devices" config TCG_TPM tristate "TPM Hardware Support" - depends on EXPERIMENTAL && PCI + depends on EXPERIMENTAL ---help--- If you have a TPM security chip in your system, which implements the Trusted Computing Group's specification, diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 0b283d246730..a9be0e8eaea5 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -377,6 +377,7 @@ int tpm_release(struct inode *inode, struct file *file) file->private_data = NULL; chip->num_opens--; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); atomic_set(&chip->data_pending, 0); put_device(chip->dev); kfree(chip->data_buffer); @@ -428,6 +429,7 @@ ssize_t tpm_read(struct file * file, char __user *buf, int ret_size; del_singleshot_timer_sync(&chip->user_read_timer); + flush_scheduled_work(); ret_size = atomic_read(&chip->data_pending); atomic_set(&chip->data_pending, 0); if (ret_size > 0) { /* relay data */ diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c index deb4b5c80914..ff3654964fe3 100644 --- a/drivers/char/tpm/tpm_atmel.c +++ b/drivers/char/tpm/tpm_atmel.c @@ -47,13 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) return -EIO; for (i = 0; i < 6; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading header\n"); + dev_err(chip->dev, "error reading header\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* size of the data received */ @@ -64,10 +63,9 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) dev_err(chip->dev, "Recv size(%d) less than available space\n", size); for (; i < size; i++) { /* clear the waiting data anyway */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } } @@ -76,17 +74,17 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count) /* read all the data available */ for (; i < size; i++) { - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); if ((status & ATML_STATUS_DATA_AVAIL) == 0) { - dev_err(chip->dev, - "error reading data\n"); + dev_err(chip->dev, "error reading data\n"); return -EIO; } - *buf++ = atmel_getb(chip, 0); + *buf++ = ioread8(chip->vendor->iobase); } /* make sure data available is gone */ - status = atmel_getb(chip, 1); + status = ioread8(chip->vendor->iobase + 1); + if (status & ATML_STATUS_DATA_AVAIL) { dev_err(chip->dev, "data available is stuck\n"); return -EIO; @@ -102,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) dev_dbg(chip->dev, "tpm_atml_send:\n"); for (i = 0; i < count; i++) { dev_dbg(chip->dev, "%d 0x%x(%d)\n", i, buf[i], buf[i]); - atmel_putb(buf[i], chip, 0); + iowrite8(buf[i], chip->vendor->iobase); } return count; @@ -110,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count) static void tpm_atml_cancel(struct tpm_chip *chip) { - atmel_putb(ATML_STATUS_ABORT, chip, 1); + iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1); } static u8 tpm_atml_status(struct tpm_chip *chip) { - return atmel_getb(chip, 1); + return ioread8(chip->vendor->iobase + 1); } static struct file_operations atmel_ops = { @@ -162,7 +160,8 @@ static void atml_plat_remove(void) if (chip) { if (chip->vendor->have_region) - atmel_release_region(chip->vendor->base, chip->vendor->region_size); + atmel_release_region(chip->vendor->base, + chip->vendor->region_size); atmel_put_base_addr(chip->vendor); tpm_remove_hardware(chip->dev); platform_device_unregister(pdev); @@ -183,14 +182,19 @@ static int __init init_atmel(void) driver_register(&atml_drv); - if (atmel_get_base_addr(&tpm_atmel) != 0) { + if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) { rc = -ENODEV; goto err_unreg_drv; } - tpm_atmel.have_region = (atmel_request_region( tpm_atmel.base, tpm_atmel.region_size, "tpm_atmel0") == NULL) ? 0 : 1; + tpm_atmel.have_region = + (atmel_request_region + (tpm_atmel.base, tpm_atmel.region_size, + "tpm_atmel0") == NULL) ? 0 : 1; - if (IS_ERR(pdev = platform_device_register_simple("tpm_atmel", -1, NULL, 0 ))) { + if (IS_ERR + (pdev = + platform_device_register_simple("tpm_atmel", -1, NULL, 0))) { rc = PTR_ERR(pdev); goto err_rel_reg; } @@ -202,9 +206,10 @@ static int __init init_atmel(void) err_unreg_dev: platform_device_unregister(pdev); err_rel_reg: - if (tpm_atmel.have_region) - atmel_release_region(tpm_atmel.base, tpm_atmel.region_size); atmel_put_base_addr(&tpm_atmel); + if (tpm_atmel.have_region) + atmel_release_region(tpm_atmel.base, + tpm_atmel.region_size); err_unreg_drv: driver_unregister(&atml_drv); return rc; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 3c5b9a8d1c49..d3478aaadd77 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -27,12 +27,14 @@ #define atmel_putb(val, chip, offset) writeb(val, chip->vendor->iobase + offset) #define atmel_request_region request_mem_region #define atmel_release_region release_mem_region -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) + +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { iounmap(vendor->iobase); } -static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { struct device_node *dn; unsigned long address, size; @@ -44,11 +46,11 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) dn = of_find_node_by_name(NULL, "tpm"); if (!dn) - return 1; + return NULL; if (!device_is_compatible(dn, "AT97SC3201")) { of_node_put(dn); - return 1; + return NULL; } reg = (unsigned int *) get_property(dn, "reg", ®len); @@ -71,8 +73,7 @@ static int atmel_get_base_addr(struct tpm_vendor_specific *vendor) vendor->base = address; vendor->region_size = size; - vendor->iobase = ioremap(address, size); - return 0; + return ioremap(vendor->base, vendor->region_size); } #else #define atmel_getb(chip, offset) inb(chip->vendor->base + offset) @@ -105,18 +106,19 @@ static int atmel_verify_tpm11(void) return 0; } -static inline void atmel_put_base_addr(struct tpm_vendor_specific *vendor) +static inline void atmel_put_base_addr(struct tpm_vendor_specific + *vendor) { } /* Determine where to talk to device */ -static unsigned long atmel_get_base_addr(struct tpm_vendor_specific +static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor) { int lo, hi; if (atmel_verify_tpm11() != 0) - return 1; + return NULL; lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO); hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI); @@ -124,6 +126,6 @@ static unsigned long atmel_get_base_addr(struct tpm_vendor_specific vendor->base = (hi << 8) | lo; vendor->region_size = 2; - return 0; + return ioport_map(vendor->base, vendor->region_size); } #endif diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index cef024a7d048..cd6f45d186ab 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -36,8 +36,6 @@ #include /* Pick up IXP2000-specific bits */ #include -static struct device_driver ixp2000_i2c_driver; - static inline int ixp2000_scl_pin(void *data) { return ((struct ixp2000_i2c_pins*)data)->scl_pin; @@ -120,7 +118,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP2000, - strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name, + strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data, @@ -132,7 +130,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->sda_pin, 0); if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) { - dev_err(dev, "Could not install, error %d\n", err); + dev_err(&plat_dev->dev, "Could not install, error %d\n", err); kfree(drv_data); return err; } diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index aa36855fa995..e422d8b2d4d6 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -35,8 +35,6 @@ #include /* Pick up IXP4xx-specific bits */ -static struct device_driver ixp4xx_i2c_driver; - static inline int ixp4xx_scl_pin(void *data) { return ((struct ixp4xx_i2c_pins*)data)->scl_pin; @@ -128,7 +126,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.timeout = 100; drv_data->adapter.id = I2C_HW_B_IXP4XX; - strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name, + strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, I2C_NAME_SIZE); drv_data->adapter.algo_data = &drv_data->algo_data; @@ -140,7 +138,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->sda_pin, 0); if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { - printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id); + printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); kfree(drv_data); return err; diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 42e5b8175cbf..31e649a9ff71 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -625,7 +625,7 @@ config BLK_DEV_NS87415 tristate "NS87415 chipset support" help This driver adds detection and support for the NS87415 chip - (used in SPARC64, among others). + (used mainly on SPARC64 and PA-RISC machines). Please read the comments at the top of . @@ -787,6 +787,10 @@ config BLK_DEV_IDE_PMAC_BLINK This option enables the use of the sleep LED as a hard drive activity LED. +config BLK_DEV_IDE_SWARM + tristate "IDE for Sibyte evaluation boards" + depends on SIBYTE_SB1xxx_SOC + config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cca9c075966d..569fae717503 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -48,6 +48,6 @@ obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ +obj-$(CONFIG_BLK_DEV_IDE) += legacy/ arm/ mips/ obj-$(CONFIG_BLK_DEV_HD) += legacy/ obj-$(CONFIG_ETRAX_IDE) += cris/ diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c2f47923d174..9455e42abb23 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3328,8 +3328,8 @@ static ide_proc_entry_t idecd_proc[] = { #endif static ide_driver_t ide_cdrom_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-cdrom", .bus = &ide_bus_type, .probe = ide_cd_probe, @@ -3510,8 +3510,8 @@ static void __exit ide_cdrom_exit(void) { driver_unregister(&ide_cdrom_driver.gen_driver); } - -static int ide_cdrom_init(void) + +static int __init ide_cdrom_init(void) { return driver_register(&ide_cdrom_driver.gen_driver); } diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index e827b39e4b3c..f4e3d3527b0e 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1089,8 +1089,8 @@ static void ide_device_shutdown(struct device *dev) } static ide_driver_t idedisk_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-disk", .bus = &ide_bus_type, .probe = ide_disk_probe, @@ -1266,7 +1266,7 @@ static void __exit idedisk_exit (void) driver_unregister(&idedisk_driver.gen_driver); } -static int idedisk_init (void) +static int __init idedisk_init(void) { return driver_register(&idedisk_driver.gen_driver); } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index f615ab759962..9e293c8063dc 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1925,8 +1925,8 @@ static ide_proc_entry_t idefloppy_proc[] = { static int ide_floppy_probe(struct device *); static ide_driver_t idefloppy_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-floppy", .bus = &ide_bus_type, .probe = ide_floppy_probe, @@ -2191,10 +2191,7 @@ static void __exit idefloppy_exit (void) driver_unregister(&idefloppy_driver.gen_driver); } -/* - * idefloppy_init will register the driver for each floppy. - */ -static int idefloppy_init (void) +static int __init idefloppy_init(void) { printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); return driver_register(&idefloppy_driver.gen_driver); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 5275cbb1afe9..ecfafcdafea4 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1629,12 +1629,6 @@ EXPORT_SYMBOL(ide_init_drive_cmd); * for the new rq to be completed. This is VERY DANGEROUS, and is * intended for careful use by the ATAPI tape/cdrom driver code. * - * If action is ide_next, then the rq is queued immediately after - * the currently-being-processed-request (if any), and the function - * returns without waiting for the new rq to be completed. As above, - * This is VERY DANGEROUS, and is intended for careful use by the - * ATAPI tape/cdrom driver code. - * * If action is ide_end, then the rq is queued at the end of the * request queue, and the function returns immediately without waiting * for the new rq to be completed. This is again intended for careful diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index b09a6537c7a8..41d46dbe6c24 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -410,10 +410,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) { u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */ - if (on && drive->media == ide_disk) { - if (!PCI_DMA_BUS_IS_PHYS) - addr = BLK_BOUNCE_ANY; - else if (HWIF(drive)->pci_dev) + if (!PCI_DMA_BUS_IS_PHYS) { + addr = BLK_BOUNCE_ANY; + } else if (on && drive->media == ide_disk) { + if (HWIF(drive)->pci_dev) addr = HWIF(drive)->pci_dev->dma_mask; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0ac7eb8f40d5..7d7944ed4158 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4748,8 +4748,8 @@ static ide_proc_entry_t idetape_proc[] = { static int ide_tape_probe(struct device *); static ide_driver_t idetape_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-tape", .bus = &ide_bus_type, .probe = ide_tape_probe, @@ -4916,10 +4916,7 @@ static void __exit idetape_exit (void) unregister_chrdev(IDETAPE_MAJOR, "ht"); } -/* - * idetape_init will register the driver for each tape. - */ -static int idetape_init (void) +static int __init idetape_init(void) { int error = 1; idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 54f9639c2a8c..62ebefd6394a 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -51,8 +51,6 @@ #include #include -#define DEBUG_TASKFILE 0 /* unset when fixed */ - static void ata_bswap_data (void *buffer, int wcount) { u16 *p = buffer; @@ -765,9 +763,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) ide_hwif_t *hwif = HWIF(drive); task_struct_t *taskfile = (task_struct_t *) task->tfRegister; hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister; -#if DEBUG_TASKFILE - u8 status; -#endif if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -778,19 +773,13 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) } /* - * (ks) Check taskfile in/out flags. + * (ks) Check taskfile in flags. * If set, then execute as it is defined. * If not set, then define default settings. * The default values are: - * write and read all taskfile registers (except data) - * write and read the hob registers (sector,nsector,lcyl,hcyl) + * read all taskfile registers (except data) + * read the hob registers (sector, nsector, lcyl, hcyl) */ - if (task->tf_out_flags.all == 0) { - task->tf_out_flags.all = IDE_TASKFILE_STD_OUT_FLAGS; - if (drive->addressing == 1) - task->tf_out_flags.all |= (IDE_HOB_STD_OUT_FLAGS << 8); - } - if (task->tf_in_flags.all == 0) { task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; if (drive->addressing == 1) @@ -803,16 +792,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task) hwif->OUTB(drive->ctl, IDE_CONTROL_REG); SELECT_MASK(drive, 0); -#if DEBUG_TASKFILE - status = hwif->INB(IDE_STATUS_REG); - if (status & 0x80) { - printk("flagged_taskfile -> Bad status. Status = %02x. wait 100 usec ...\n", status); - udelay(100); - status = hwif->INB(IDE_STATUS_REG); - printk("flagged_taskfile -> Status = %02x\n", status); - } -#endif - if (task->tf_out_flags.b.data) { u16 data = taskfile->data + (hobfile->data << 8); hwif->OUTW(data, IDE_DATA_REG); diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile new file mode 100644 index 000000000000..578e52a59588 --- /dev/null +++ b/drivers/ide/mips/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_BLK_DEV_IDE_SWARM) += swarm.o diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c new file mode 100644 index 000000000000..66f6064f4640 --- /dev/null +++ b/drivers/ide/mips/swarm.c @@ -0,0 +1,201 @@ +/* + * Copyright (C) 2001, 2002, 2003 Broadcom Corporation + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved. + * Author: Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * Derived loosely from ide-pmac.c, so: + * Copyright (C) 1998 Paul Mackerras. + * Copyright (C) 1995-1998 Mark Lord + */ + +/* + * Boards with SiByte processors so far have supported IDE devices via + * the Generic Bus, PCI bus, and built-in PCMCIA interface. In all + * cases, byte-swapping must be avoided for these devices (whereas + * other PCI devices, for example, will require swapping). Any + * SiByte-targetted kernel including IDE support will include this + * file. Probing of a Generic Bus for an IDE device is controlled by + * the definition of "SIBYTE_HAVE_IDE", which is provided by + * for Broadcom boards. + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define DRV_NAME "ide-swarm" + +static char swarm_ide_string[] = DRV_NAME; + +static struct resource swarm_ide_resource = { + .name = "SWARM GenBus IDE", + .flags = IORESOURCE_MEM, +}; + +static struct platform_device *swarm_ide_dev; + +/* + * swarm_ide_probe - if the board header indicates the existence of + * Generic Bus IDE, allocate a HWIF for it. + */ +static int __devinit swarm_ide_probe(struct device *dev) +{ + ide_hwif_t *hwif; + u8 __iomem *base; + phys_t offset, size; + int i; + + if (!SIBYTE_HAVE_IDE) + return -ENODEV; + + /* Find an empty slot. */ + for (i = 0; i < MAX_HWIFS; i++) + if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET]) + break; + if (i >= MAX_HWIFS) { + printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); + return -ENOMEM; + } + + hwif = ide_hwifs + i; + + base = ioremap(A_IO_EXT_BASE, 0x800); + offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); + size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); + iounmap(base); + + offset = G_IO_START_ADDR(offset) << S_IO_ADDRBASE; + size = (G_IO_MULT_SIZE(size) + 1) << S_IO_REGSIZE; + if (offset < A_PHYS_GENBUS || offset >= A_PHYS_GENBUS_END) { + printk(KERN_INFO DRV_NAME + ": IDE interface at GenBus disabled\n"); + return -EBUSY; + } + + printk(KERN_INFO DRV_NAME ": IDE interface at GenBus slot %i\n", + IDE_CS); + + swarm_ide_resource.start = offset; + swarm_ide_resource.end = offset + size - 1; + if (request_resource(&iomem_resource, &swarm_ide_resource)) { + printk(KERN_ERR DRV_NAME + ": can't request I/O memory resource\n"); + return -EBUSY; + } + + base = ioremap(offset, size); + + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + /* Prevent resource map manipulation. */ + hwif->mmio = 2; + hwif->noprobe = 0; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) + hwif->hw.io_ports[i] = + (unsigned long)(base + ((0x1f0 + i) << 5)); + hwif->hw.io_ports[IDE_CONTROL_OFFSET] = + (unsigned long)(base + (0x3f6 << 5)); + hwif->hw.irq = K_INT_GB_IDE; + + memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports)); + hwif->irq = hwif->hw.irq; + + dev_set_drvdata(dev, hwif); + + return 0; +} + +static struct device_driver swarm_ide_driver = { + .name = swarm_ide_string, + .bus = &platform_bus_type, + .probe = swarm_ide_probe, +}; + +static void swarm_ide_platform_release(struct device *device) +{ + struct platform_device *pldev; + + /* free device */ + pldev = to_platform_device(device); + kfree(pldev); +} + +static int __devinit swarm_ide_init_module(void) +{ + struct platform_device *pldev; + int err; + + printk(KERN_INFO "SWARM IDE driver\n"); + + if (driver_register(&swarm_ide_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + err = -ENODEV; + goto out; + } + + if (!(pldev = kmalloc(sizeof (*pldev), GFP_KERNEL))) { + err = -ENOMEM; + goto out_unregister_driver; + } + + memset (pldev, 0, sizeof (*pldev)); + pldev->name = swarm_ide_string; + pldev->id = 0; + pldev->dev.release = swarm_ide_platform_release; + + if (platform_device_register(pldev)) { + err = -ENODEV; + goto out_free_pldev; + } + + if (!pldev->dev.driver) { + /* + * The driver was not bound to this device, there was + * no hardware at this address. Unregister it, as the + * release fuction will take care of freeing the + * allocated structure + */ + platform_device_unregister (pldev); + } + + swarm_ide_dev = pldev; + + return 0; + +out_free_pldev: + kfree(pldev); + +out_unregister_driver: + driver_unregister(&swarm_ide_driver); +out: + return err; +} + +module_init(swarm_ide_init_module); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 52cadc005d72..a21b1e11eef4 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = { #define BUSCLOCK(D) \ ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D))) -#if 0 - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { - (void) pci_read_config_byte(dev, 0x54, &art); - p += sprintf(p, "DMA Mode: %s(%s)", - (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO", - (art&0x02)?"2":(art&0x01)?"1":"0"); - p += sprintf(p, " %s(%s)", - (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO", - (art&0x08)?"2":(art&0x04)?"1":"0"); - p += sprintf(p, " %s(%s)", - (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO", - (art&0x20)?"2":(art&0x10)?"1":"0"); - p += sprintf(p, " %s(%s)\n", - (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO", - (art&0x80)?"2":(art&0x40)?"1":"0"); - } else { -#endif /* * TO DO: active tuning and correction of cards without a bios. @@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive) switch(hwif->pci_dev->device) { case PCI_DEVICE_ID_ARTOP_ATP865: case PCI_DEVICE_ID_ARTOP_ATP865R: -#if 0 - mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3; -#else mode = (hwif->INB(((hwif->channel) ? hwif->mate->dma_status : hwif->dma_status)) & 0x10) ? 4 : 3; -#endif break; case PCI_DEVICE_ID_ARTOP_ATP860: case PCI_DEVICE_ID_ARTOP_ATP860R: @@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive) case PCI_DEVICE_ID_ARTOP_ATP865: case PCI_DEVICE_ID_ARTOP_ATP865R: printk(" AEC62XX time out "); -#if 0 - { - int i = 0; - u8 reg49h = 0; - pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, ®49h); - for (i=0;i<256;i++) - pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10); - pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10); - } - return 0; -#endif default: break; } -#if 0 - { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; - u8 tmp1 = 0, tmp2 = 0, mode6 = 0; - - pci_read_config_byte(dev, 0x44, &tmp1); - pci_read_config_byte(dev, 0x45, &tmp2); - printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2); - mode6 = HWIF(drive)->INB(((hwif->channel) ? - hwif->mate->dma_status : - hwif->dma_status)); - printk(" AEC6280 133=%x ", (mode6 & 0x10)); - } -#endif return 0; } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 6cf49394a80f..cf84350efc55 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -876,10 +876,15 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = { static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + static struct pci_device_id ati_rs100[] = { + { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) }, + { }, + }; + ide_pci_device_t *d = &ali15x3_chipset; - if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL)) - printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n"); + if (pci_dev_present(ati_rs100)) + printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n"); #if defined(CONFIG_SPARC64) d->init_hwif = init_hwif_common_ali15x3; diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 7dc24682d197..ea3c52cc8ac1 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -222,10 +222,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic /* We must not grab the entire device, it has 'ISA' space in its BARS too and we will freak out other bits of the kernel */ - if(pci_enable_device_bars(dev, 1<<2)) - { + if (pci_enable_device_bars(dev, 1<<2)) { printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); - return 1; + return -ENODEV; } pci_set_master(dev); if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 022d244f2eb0..f1ca154dd52c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -6,7 +6,13 @@ * * May be copied or modified under the terms of the GNU General Public License * - * Documentation available under NDA only + * Documentation for CMD680: + * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2 + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Errata and other documentation only available under NDA. * * * FAQ Items: diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 16b3e2d8bfb1..75a2253a3e68 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -87,6 +87,7 @@ static const struct { u8 chipset_family; u8 flags; } SiSHostChipInfo[] = { + { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 }, diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index a4d099c937ff..7161ce0ef5aa 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -79,6 +79,7 @@ static struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -100,185 +101,14 @@ static struct via_isa_bridge { { NULL } }; -static struct via_isa_bridge *via_config; -static unsigned int via_80w; static unsigned int via_clock; static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" }; -/* - * VIA /proc entry. - */ - -#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) - -#include -#include - -static u8 via_proc = 0; -static unsigned long via_base; -static struct pci_dev *bmide_dev, *isa_dev; - -static char *via_control3[] = { "No limit", "64", "128", "192" }; - -#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg) -#define via_print_drive(name, format, arg...)\ - p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n"); - - -/** - * via_get_info - generate via /proc file - * @buffer: buffer for data - * @addr: set to start of data to use - * @offset: current file offset - * @count: size of read - * - * Fills in buffer with the debugging/configuration information for - * the VIA chipset tuning and attached drives - */ - -static int via_get_info(char *buffer, char **addr, off_t offset, int count) +struct via82cxxx_dev { - int speed[4], cycle[4], setup[4], active[4], recover[4], den[4], - uen[4], udma[4], umul[4], active8b[4], recover8b[4]; - struct pci_dev *dev = bmide_dev; - unsigned int v, u, i; - int len; - u16 c, w; - u8 t, x; - char *p = buffer; - - via_print("----------VIA BusMastering IDE Configuration" - "----------------"); - - via_print("Driver Version: 3.38"); - via_print("South Bridge: VIA %s", - via_config->name); - - pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t); - pci_read_config_byte(dev, PCI_REVISION_ID, &x); - via_print("Revision: ISA %#x IDE %#x", t, x); - via_print("Highest DMA rate: %s", - via_dma[via_config->flags & VIA_UDMA]); - - via_print("BM-DMA base: %#lx", via_base); - via_print("PCI clock: %d.%dMHz", - via_clock / 1000, via_clock / 100 % 10); - - pci_read_config_byte(dev, VIA_MISC_1, &t); - via_print("Master Read Cycle IRDY: %dws", - (t & 64) >> 6); - via_print("Master Write Cycle IRDY: %dws", - (t & 32) >> 5); - via_print("BM IDE Status Register Read Retry: %s", - (t & 8) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_MISC_3, &t); - via_print("Max DRDY Pulse Width: %s%s", - via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : ""); - - via_print("-----------------------Primary IDE" - "-------Secondary IDE------"); - via_print("Read DMA FIFO flush: %10s%20s", - (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no"); - via_print("End Sector FIFO flush: %10s%20s", - (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_IDE_CONFIG, &t); - via_print("Prefetch Buffer: %10s%20s", - (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no"); - via_print("Post Write Buffer: %10s%20s", - (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no"); - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &t); - via_print("Enabled: %10s%20s", - (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no"); - - c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8); - via_print("Simplex only: %10s%20s", - (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no"); - - via_print("Cable Type: %10s%20s", - (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w"); - - via_print("-------------------drive0----drive1" - "----drive2----drive3-----"); - - pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v); - pci_read_config_word(dev, VIA_8BIT_TIMING, &w); - - if (via_config->flags & VIA_UDMA) - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - else u = 0; - - for (i = 0; i < 4; i++) { - - setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1; - recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1; - active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1; - active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1; - recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1; - udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2; - umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2; - uen[i] = ((u >> ((3 - i) << 3)) & 0x20); - den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2)); - - speed[i] = 2 * via_clock / (active[i] + recover[i]); - cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock; - - if (!uen[i] || !den[i]) - continue; - - switch (via_config->flags & VIA_UDMA) { - - case VIA_UDMA_33: - speed[i] = 2 * via_clock / udma[i]; - cycle[i] = 1000000 * udma[i] / via_clock; - break; - - case VIA_UDMA_66: - speed[i] = 4 * via_clock / (udma[i] * umul[i]); - cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock; - break; - - case VIA_UDMA_100: - speed[i] = 6 * via_clock / udma[i]; - cycle[i] = 333333 * udma[i] / via_clock; - break; - - case VIA_UDMA_133: - speed[i] = 8 * via_clock / udma[i]; - cycle[i] = 250000 * udma[i] / via_clock; - break; - } - } - - via_print_drive("Transfer Mode: ", "%10s", - den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO"); - - via_print_drive("Address Setup: ", "%8dns", - 1000000 * setup[i] / via_clock); - via_print_drive("Cmd Active: ", "%8dns", - 1000000 * active8b[i] / via_clock); - via_print_drive("Cmd Recovery: ", "%8dns", - 1000000 * recover8b[i] / via_clock); - via_print_drive("Data Active: ", "%8dns", - 1000000 * active[i] / via_clock); - via_print_drive("Data Recovery: ", "%8dns", - 1000000 * recover[i] / via_clock); - via_print_drive("Cycle Time: ", "%8dns", - cycle[i]); - via_print_drive("Transfer Rate: ", "%4d.%dMB/s", - speed[i] / 1000, speed[i] / 100 % 10); - - /* hoping it is less than 4K... */ - len = (p - buffer) - offset; - *addr = buffer + offset; - - return len > count ? count : len; -} - -#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ + struct via_isa_bridge *via_config; + unsigned int via_80w; +}; /** * via_set_speed - write timing registers @@ -289,11 +119,13 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count) * via_set_speed writes timing values to the chipset registers */ -static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) +static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) { + struct pci_dev *dev = hwif->pci_dev; + struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); u8 t; - if (~via_config->flags & VIA_BAD_AST) { + if (~vdev->via_config->flags & VIA_BAD_AST) { pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); @@ -305,7 +137,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); - switch (via_config->flags & VIA_UDMA) { + switch (vdev->via_config->flags & VIA_UDMA) { case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; @@ -329,6 +161,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing) static int via_set_drive(ide_drive_t *drive, u8 speed) { ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1); + struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif); struct ide_timing t, p; unsigned int T, UT; @@ -337,7 +170,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) T = 1000000000 / via_clock; - switch (via_config->flags & VIA_UDMA) { + switch (vdev->via_config->flags & VIA_UDMA) { case VIA_UDMA_33: UT = T; break; case VIA_UDMA_66: UT = T/2; break; case VIA_UDMA_100: UT = T/3; break; @@ -352,7 +185,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed) ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); } - via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t); + via_set_speed(HWIF(drive), drive->dn, &t); if (!drive->init_speed) drive->init_speed = speed; @@ -390,20 +223,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio) static int via82cxxx_ide_dma_check (ide_drive_t *drive) { - u16 w80 = HWIF(drive)->udma_four; + ide_hwif_t *hwif = HWIF(drive); + struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif); + u16 w80 = hwif->udma_four; u16 speed = ide_find_best_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | - (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | - (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); + (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) | + (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0)); via_set_drive(drive, speed); if (drive->autodma && (speed & XFER_MODE) != XFER_PIO) - return HWIF(drive)->ide_dma_on(drive); - return HWIF(drive)->ide_dma_off_quietly(drive); + return hwif->ide_dma_on(drive); + return hwif->ide_dma_off_quietly(drive); +} + +static struct via_isa_bridge *via_config_find(struct pci_dev **isa) +{ + struct via_isa_bridge *via_config; + u8 t; + + for (via_config = via_isa_bridges; via_config->id; via_config++) + if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA + + !!(via_config->flags & VIA_BAD_ID), + via_config->id, NULL))) { + + pci_read_config_byte(*isa, PCI_REVISION_ID, &t); + if (t >= via_config->rev_min && + t <= via_config->rev_max) + break; + } + + return via_config; } /** @@ -418,82 +272,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive) static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name) { struct pci_dev *isa = NULL; + struct via_isa_bridge *via_config; u8 t, v; unsigned int u; - int i; /* * Find the ISA bridge to see how good the IDE is. */ - - for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((isa = pci_find_device(PCI_VENDOR_ID_VIA + - !!(via_config->flags & VIA_BAD_ID), - via_config->id, NULL))) { - - pci_read_config_byte(isa, PCI_REVISION_ID, &t); - if (t >= via_config->rev_min && - t <= via_config->rev_max) - break; - } - + via_config = via_config_find(&isa); if (!via_config->id) { printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n"); return -ENODEV; } /* - * Check 80-wire cable presence and setup Clk66. + * Setup or disable Clk66 if appropriate */ - switch (via_config->flags & VIA_UDMA) { - - case VIA_UDMA_66: - /* Enable Clk66 */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_100: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case VIA_UDMA_133: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - via_80w |= (1 << (1 - (i >> 4))); - } - break; - - } - - /* Disable Clk66 */ - if (via_config->flags & VIA_BAD_CLK66) { + if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) { + /* Enable Clk66 */ + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); + } else if (via_config->flags & VIA_BAD_CLK66) { /* Would cause trouble on 596a and 686 */ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); @@ -560,26 +360,78 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const via_dma[via_config->flags & VIA_UDMA], pci_name(dev)); - /* - * Setup /proc/ide/via entry. - */ - -#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS) - if (!via_proc) { - via_base = pci_resource_start(dev, 4); - bmide_dev = dev; - isa_dev = isa; - ide_pci_create_host_proc("via", via_get_info); - via_proc = 1; - } -#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */ return 0; } +/* + * Check and handle 80-wire cable presence + */ +static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev) +{ + unsigned int u; + int i; + pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); + + switch (vdev->via_config->flags & VIA_UDMA) { + + case VIA_UDMA_66: + for (i = 24; i >= 0; i -= 8) + if (((u >> (i & 16)) & 8) && + ((u >> i) & 0x20) && + (((u >> i) & 7) < 2)) { + /* + * 2x PCI clock and + * UDMA w/ < 3T/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_100: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 4))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + case VIA_UDMA_133: + for (i = 24; i >= 0; i -= 8) + if (((u >> i) & 0x10) || + (((u >> i) & 0x20) && + (((u >> i) & 7) < 6))) { + /* BIOS 80-wire bit or + * UDMA w/ < 60ns/cycle + */ + vdev->via_80w |= (1 << (1 - (i >> 4))); + } + break; + + } +} + static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) { + struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev), + GFP_KERNEL); + struct pci_dev *isa = NULL; int i; + if (vdev == NULL) { + printk(KERN_ERR "VP_IDE: out of memory :(\n"); + return; + } + + memset(vdev, 0, sizeof(struct via82cxxx_dev)); + ide_set_hwifdata(hwif, vdev); + + vdev->via_config = via_config_find(&isa); + via_cable_detect(hwif->pci_dev, vdev); + hwif->autodma = 0; hwif->tuneproc = &via82cxxx_tune_drive; @@ -594,7 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) for (i = 0; i < 2; i++) { hwif->drives[i].io_32bit = 1; - hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1; + hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1; hwif->drives[i].autotune = 1; hwif->drives[i].dn = hwif->channel * 2 + i; } @@ -608,7 +460,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->swdma_mask = 0x07; if (!hwif->udma_four) - hwif->udma_four = (via_80w >> hwif->channel) & 1; + hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1; hwif->ide_dma_check = &via82cxxx_ide_dma_check; if (!noautodma) hwif->autodma = 1; @@ -616,24 +468,35 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->drives[1].autodma = hwif->autodma; } -static ide_pci_device_t via82cxxx_chipset __devinitdata = { - .name = "VP_IDE", - .init_chipset = init_chipset_via82cxxx, - .init_hwif = init_hwif_via82cxxx, - .channels = 2, - .autodma = NOAUTODMA, - .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, - .bootable = ON_BOARD, +static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { + { /* 0 */ + .name = "VP_IDE", + .init_chipset = init_chipset_via82cxxx, + .init_hwif = init_hwif_via82cxxx, + .channels = 2, + .autodma = NOAUTODMA, + .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, + .bootable = ON_BOARD + },{ /* 1 */ + .name = "VP_IDE", + .init_chipset = init_chipset_via82cxxx, + .init_hwif = init_hwif_via82cxxx, + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, + .bootable = ON_BOARD, + } }; static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &via82cxxx_chipset); + return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); } static struct pci_device_id via_pci_tbl[] = { { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, via_pci_tbl); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 136911a86e84..16b28357885b 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1401,20 +1401,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) /* We probe the hwif now */ probe_hwif_init(hwif); - /* The code IDE code will have set hwif->present if we have devices attached, - * if we don't, the discard the interface except if we are on a media bay slot - */ - if (!hwif->present && !pmif->mediabay) { - printk(KERN_INFO "ide%d: Bus empty, interface released.\n", - hwif->index); - default_hwif_iops(hwif); - for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i) - hwif->io_ports[i] = 0; - hwif->chipset = ide_unknown; - hwif->noprobe = 1; - return -ENODEV; - } - return 0; } diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index d4f2111d4364..7ebf992e8c2f 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -787,7 +787,7 @@ static int pre_init = 1; /* Before first ordered IDE scan */ static LIST_HEAD(ide_pci_drivers); /* - * __ide_register_pci_driver - attach IDE driver + * __ide_pci_register_driver - attach IDE driver * @driver: pci driver * @module: owner module of the driver * diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 5ea741f47fc8..e73f81c22381 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -312,7 +312,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, int ret, length, hdr_len, copy_offset; int rmpp_active = 0; - if (count < sizeof (struct ib_user_mad)) + if (count < sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR) return -EINVAL; length = count - sizeof (struct ib_user_mad); diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 760c418d5bc9..dd4e13303e96 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -730,14 +730,15 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) } if (attr_mask & IB_QP_ACCESS_FLAGS) { + qp_context->params2 |= + cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ? + MTHCA_QP_BIT_RWE : 0); + /* - * Only enable RDMA/atomics if we have responder - * resources set to a non-zero value. + * Only enable RDMA reads and atomics if we have + * responder resources set to a non-zero value. */ if (qp->resp_depth) { - qp_context->params2 |= - cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ? - MTHCA_QP_BIT_RWE : 0); qp_context->params2 |= cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_READ ? MTHCA_QP_BIT_RRE : 0); @@ -759,22 +760,19 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) if (qp->resp_depth && !attr->max_dest_rd_atomic) { /* * Lowering our responder resources to zero. - * Turn off RDMA/atomics as responder. - * (RWE/RRE/RAE in params2 already zero) + * Turn off reads RDMA and atomics as responder. + * (RRE/RAE in params2 already zero) */ - qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE | - MTHCA_QP_OPTPAR_RRE | + qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE | MTHCA_QP_OPTPAR_RAE); } if (!qp->resp_depth && attr->max_dest_rd_atomic) { /* * Increasing our responder resources from - * zero. Turn on RDMA/atomics as appropriate. + * zero. Turn on RDMA reads and atomics as + * appropriate. */ - qp_context->params2 |= - cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_WRITE ? - MTHCA_QP_BIT_RWE : 0); qp_context->params2 |= cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_READ ? MTHCA_QP_BIT_RRE : 0); @@ -782,8 +780,7 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask) cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_ATOMIC ? MTHCA_QP_BIT_RAE : 0); - qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE | - MTHCA_QP_OPTPAR_RRE | + qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE | MTHCA_QP_OPTPAR_RAE); } @@ -921,10 +918,12 @@ static void mthca_adjust_qp_caps(struct mthca_dev *dev, else qp->max_inline_data = max_data_size - MTHCA_INLINE_HEADER_SIZE; - qp->sq.max_gs = max_data_size / sizeof (struct mthca_data_seg); - qp->rq.max_gs = (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) - - sizeof (struct mthca_next_seg)) / - sizeof (struct mthca_data_seg); + qp->sq.max_gs = min_t(int, dev->limits.max_sg, + max_data_size / sizeof (struct mthca_data_seg)); + qp->rq.max_gs = min_t(int, dev->limits.max_sg, + (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) - + sizeof (struct mthca_next_seg)) / + sizeof (struct mthca_data_seg)); } /* diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 321a3a10e69b..ee9fe226ae99 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -802,13 +802,21 @@ static int srp_post_recv(struct srp_target_port *target) /* * Must be called with target->scsi_host->host_lock held to protect - * req_lim and tx_head. + * req_lim and tx_head. Lock cannot be dropped between call here and + * call to __srp_post_send(). */ static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target) { if (target->tx_head - target->tx_tail >= SRP_SQ_SIZE) return NULL; + if (unlikely(target->req_lim < 1)) { + if (printk_ratelimit()) + printk(KERN_DEBUG PFX "Target has req_lim %d\n", + target->req_lim); + return NULL; + } + return target->tx_ring[target->tx_head & SRP_SQ_SIZE]; } @@ -823,11 +831,6 @@ static int __srp_post_send(struct srp_target_port *target, struct ib_send_wr wr, *bad_wr; int ret = 0; - if (target->req_lim < 1) { - printk(KERN_ERR PFX "Target has req_lim %d\n", target->req_lim); - return -EAGAIN; - } - list.addr = iu->dma; list.length = len; list.lkey = target->srp_host->mr->lkey; @@ -1417,6 +1420,8 @@ static ssize_t srp_create_target(struct class_device *class_dev, if (!target_host) return -ENOMEM; + target_host->max_lun = SRP_MAX_LUN; + target = host_to_target(target_host); memset(target, 0, sizeof *target); diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h index 4fec28a71367..b564f18caf78 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.h +++ b/drivers/infiniband/ulp/srp/ib_srp.h @@ -54,6 +54,7 @@ enum { SRP_PORT_REDIRECT = 1, SRP_DLID_REDIRECT = 2, + SRP_MAX_LUN = 512, SRP_MAX_IU_LEN = 256, SRP_RQ_SHIFT = 6, diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig index 801c98f30e5c..c82105920d71 100644 --- a/drivers/isdn/hisax/Kconfig +++ b/drivers/isdn/hisax/Kconfig @@ -110,7 +110,7 @@ config HISAX_16_3 config HISAX_TELESPCI bool "Teles PCI" - depends on PCI && (BROKEN || !(SPARC64 || PPC)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K)) help This enables HiSax support for the Teles PCI. See on how to configure it. @@ -238,7 +238,7 @@ config HISAX_MIC config HISAX_NETJET bool "NETjet card" - depends on PCI && (BROKEN || !(SPARC64 || PPC)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K)) help This enables HiSax support for the NetJet from Traverse Technologies. @@ -249,7 +249,7 @@ config HISAX_NETJET config HISAX_NETJET_U bool "NETspider U card" - depends on PCI && (BROKEN || !(SPARC64 || PPC)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K)) help This enables HiSax support for the Netspider U interface ISDN card from Traverse Technologies. @@ -317,7 +317,7 @@ config HISAX_GAZEL config HISAX_HFC_PCI bool "HFC PCI-Bus cards" - depends on PCI && (BROKEN || !(SPARC64 || PPC)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K)) help This enables HiSax support for the HFC-S PCI 2BDS0 based cards. @@ -344,14 +344,14 @@ config HISAX_HFC_SX config HISAX_ENTERNOW_PCI bool "Formula-n enter:now PCI card" - depends on PCI && (BROKEN || !(SPARC64 || PPC)) + depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K)) help This enables HiSax support for the Formula-n enter:now PCI ISDN card. config HISAX_AMD7930 bool "Am7930 (EXPERIMENTAL)" - depends on EXPERIMENTAL && (SPARC32 || SPARC64) + depends on EXPERIMENTAL && SPARC help This enables HiSax support for the AMD7930 chips on some SPARCs. This code is not finished yet. diff --git a/drivers/isdn/pcbit/Kconfig b/drivers/isdn/pcbit/Kconfig index f06997faef16..0933881ab0c2 100644 --- a/drivers/isdn/pcbit/Kconfig +++ b/drivers/isdn/pcbit/Kconfig @@ -3,7 +3,7 @@ # config ISDN_DRV_PCBIT tristate "PCBIT-D support" - depends on ISDN_I4L && ISA && (BROKEN || !PPC) + depends on ISDN_I4L && ISA && (BROKEN || X86) help This enables support for the PCBIT ISDN-card. This card is manufactured in Portugal by Octal. For running this card, diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 51315302a85e..252d55df9642 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -326,9 +326,9 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait) } } - ret = page->mapping->a_ops->prepare_write(NULL, page, 0, PAGE_SIZE); + ret = page->mapping->a_ops->prepare_write(bitmap->file, page, 0, PAGE_SIZE); if (!ret) - ret = page->mapping->a_ops->commit_write(NULL, page, 0, + ret = page->mapping->a_ops->commit_write(bitmap->file, page, 0, PAGE_SIZE); if (ret) { unlock_page(page); diff --git a/drivers/md/md.c b/drivers/md/md.c index f3fed662f32e..78c7418478d6 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3846,11 +3846,20 @@ static int is_mddev_idle(mddev_t *mddev) curr_events = disk_stat_read(disk, sectors[0]) + disk_stat_read(disk, sectors[1]) - atomic_read(&disk->sync_io); - /* Allow some slack between valud of curr_events and last_events, - * as there are some uninteresting races. + /* The difference between curr_events and last_events + * will be affected by any new non-sync IO (making + * curr_events bigger) and any difference in the amount of + * in-flight syncio (making current_events bigger or smaller) + * The amount in-flight is currently limited to + * 32*64K in raid1/10 and 256*PAGE_SIZE in raid5/6 + * which is at most 4096 sectors. + * These numbers are fairly fragile and should be made + * more robust, probably by enforcing the + * 'window size' that md_do_sync sort-of uses. + * * Note: the following is an unsigned comparison. */ - if ((curr_events - rdev->last_events + 32) > 64) { + if ((curr_events - rdev->last_events + 4096) > 8192) { rdev->last_events = curr_events; idle = 0; } @@ -4109,7 +4118,7 @@ static void md_do_sync(mddev_t *mddev) if (currspeed > sysctl_speed_limit_min) { if ((currspeed > sysctl_speed_limit_max) || !is_mddev_idle(mddev)) { - msleep(250); + msleep(500); goto repeat; } } diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index a1607e7d6d6b..fb394a0d838c 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -276,7 +276,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2) if (cinergyt2->stream_urb[i]) usb_free_urb(cinergyt2->stream_urb[i]); - pci_free_consistent(NULL, STREAM_URB_COUNT*STREAM_BUF_SIZE, + usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, cinergyt2->streambuf, cinergyt2->streambuf_dmahandle); } @@ -284,9 +284,8 @@ static int cinergyt2_alloc_stream_urbs (struct cinergyt2 *cinergyt2) { int i; - cinergyt2->streambuf = pci_alloc_consistent(NULL, - STREAM_URB_COUNT*STREAM_BUF_SIZE, - &cinergyt2->streambuf_dmahandle); + cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE, + SLAB_KERNEL, &cinergyt2->streambuf_dmahandle); if (!cinergyt2->streambuf) { dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n"); return -ENOMEM; @@ -780,6 +779,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_register_device(cinergyt2->rc_input_dev); schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2); + + return 0; } static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c index 35097c9bbf50..b8ccb0a95789 100644 --- a/drivers/mtd/maps/ipaq-flash.c +++ b/drivers/mtd/maps/ipaq-flash.c @@ -246,7 +246,7 @@ int __init ipaq_mtd_init(void) ipaq_map[i].size = h3xxx_max_flash_size; ipaq_map[i].set_vpp = h3xxx_set_vpp; ipaq_map[i].phys = cs_phys[i]; - ipaq_map[i].virt = __ioremap(cs_phys[i], 0x04000000, 0, 1); + ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000); if (machine_is_h3100 () || machine_is_h1900()) ipaq_map[i].bankwidth = 2; } @@ -280,7 +280,7 @@ int __init ipaq_mtd_init(void) nb_parts = ARRAY_SIZE(jornada_partitions); ipaq_map[0].size = jornada_max_flash_size; ipaq_map[0].set_vpp = jornada56x_set_vpp; - ipaq_map[0].virt = (__u32)__ioremap(0x0, 0x04000000, 0, 1); + ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000); } #endif #ifdef CONFIG_SA1100_JORNADA720 @@ -442,7 +442,7 @@ static int __init h1900_special_case(void) ipaq_map[0].size = 0x80000; ipaq_map[0].set_vpp = h3xxx_set_vpp; ipaq_map[0].phys = 0x0; - ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1); + ipaq_map[0].virt = ioremap(0x0, 0x04000000); ipaq_map[0].bankwidth = 2; printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt); diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index fc7a78e31735..2c9cc7f37e92 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -159,12 +159,12 @@ static int ixp2000_flash_probe(struct platform_device *dev) return -ENODEV; window_size = dev->resource->end - dev->resource->start + 1; - dev_info(_dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n", - ixp_data->nr_banks, ((u32)window_size >> 20)); + dev_info(&dev->dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n", + ixp_data->nr_banks, ((u32)window_size >> 20)); if (plat->width != 1) { - dev_err(_dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n", - plat->width * 8); + dev_err(&dev->dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n", + plat->width * 8); return -EIO; } @@ -202,7 +202,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) dev->resource->end - dev->resource->start + 1, dev->dev.bus_id); if (!info->res) { - dev_err(_dev, "Could not reserve memory region\n"); + dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; goto Error; } @@ -210,7 +210,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) info->map.map_priv_1 = (unsigned long) ioremap(dev->resource->start, dev->resource->end - dev->resource->start + 1); if (!info->map.map_priv_1) { - dev_err(_dev, "Failed to ioremap flash region\n"); + dev_err(&dev->dev, "Failed to ioremap flash region\n"); err = -EIO; goto Error; } @@ -221,13 +221,13 @@ static int ixp2000_flash_probe(struct platform_device *dev) */ erratum44_workaround = ixp2000_has_broken_slowport(); - dev_info(_dev, "Erratum 44 workaround %s\n", + dev_info(&dev->dev, "Erratum 44 workaround %s\n", erratum44_workaround ? "enabled" : "disabled"); #endif info->mtd = do_map_probe(plat->map_name, &info->map); if (!info->mtd) { - dev_err(_dev, "map_probe failed\n"); + dev_err(&dev->dev, "map_probe failed\n"); err = -ENXIO; goto Error; } @@ -237,7 +237,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) if (err > 0) { err = add_mtd_partitions(info->mtd, info->partitions, err); if(err) - dev_err(_dev, "Could not parse partitions\n"); + dev_err(&dev->dev, "Could not parse partitions\n"); } if (err) @@ -251,8 +251,8 @@ Error: } static struct platform_driver ixp2000_flash_driver = { - .probe = &ixp2000_flash_probe, - .remove = &ixp2000_flash_remove + .probe = ixp2000_flash_probe, + .remove = ixp2000_flash_remove, .driver = { .name = "IXP2000-Flash", }, diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 041e4b3358fb..f68f7a99a630 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -112,7 +112,7 @@ static int __init h1910_init (void) if (!machine_is_h1900()) return -ENODEV; - nandaddr = __ioremap(0x08000000, 0x1000, 0, 1); + nandaddr = ioremap(0x08000000, 0x1000); if (!nandaddr) { printk("Failed to ioremap nand flash.\n"); return -ENOMEM; diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 332e9953c55c..cd0b1dccfb61 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -32,6 +32,7 @@ * */ +#include #include #include #include diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 7a6aeae2c9fa..22cd04556707 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.14-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k4"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; - struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 256 }; + struct param_range cbs = { .min = 64, .max = 256, .count = 128 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */ @@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]); } +/********************************************************/ +/* Micro code for 8086:1229 Rev 8 */ +/********************************************************/ + +/* Parameter values for the D101M B-step */ +#define D101M_CPUSAVER_TIMER_DWORD 78 +#define D101M_CPUSAVER_BUNDLE_DWORD 65 +#define D101M_CPUSAVER_MIN_SIZE_DWORD 126 + +#define D101M_B_RCVBUNDLE_UCODE \ +{\ +0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \ +0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \ +0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \ +0x00380438, 0x00000000, 0x00140000, 0x00380555, \ +0x00308000, 0x00100662, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \ +0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \ +0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \ +0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \ +0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \ +0x00041000, 0x00010004, 0x00130826, 0x000C0006, \ +0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380C34, 0x00000000, 0x00000000, \ +0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \ +0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \ +0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \ +0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \ +0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \ +0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \ +0x00130826, 0x000C0001, 0x00220559, 0x00101313, \ +0x00380559, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00130831, 0x0010090B, 0x00124813, \ +0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \ +0x003806A8, 0x00000000, 0x00000000, 0x00000000, \ +} + +/********************************************************/ +/* Micro code for 8086:1229 Rev 9 */ +/********************************************************/ + +/* Parameter values for the D101S */ +#define D101S_CPUSAVER_TIMER_DWORD 78 +#define D101S_CPUSAVER_BUNDLE_DWORD 67 +#define D101S_CPUSAVER_MIN_SIZE_DWORD 128 + +#define D101S_RCVBUNDLE_UCODE \ +{\ +0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \ +0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \ +0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \ +0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \ +0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \ +0x00308000, 0x00100610, 0x00100561, 0x000E0408, \ +0x00134861, 0x000C0002, 0x00103093, 0x00308000, \ +0x00100624, 0x00100561, 0x000E0408, 0x00100861, \ +0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \ +0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \ +0x003A047E, 0x00044010, 0x00380819, 0x00000000, \ +0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \ +0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \ +0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \ +0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \ +0x00101313, 0x00380700, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00080600, 0x00101B10, 0x00050004, 0x00100826, \ +0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \ +0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \ +0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \ +0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \ +0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \ +0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \ +0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \ +0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \ +0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00130831, \ +0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \ +0x00041000, 0x00010004, 0x00380700 \ +} + +/********************************************************/ +/* Micro code for the 8086:1229 Rev F/10 */ +/********************************************************/ + +/* Parameter values for the D102 E-step */ +#define D102_E_CPUSAVER_TIMER_DWORD 42 +#define D102_E_CPUSAVER_BUNDLE_DWORD 54 +#define D102_E_CPUSAVER_MIN_SIZE_DWORD 46 + +#define D102_E_RCVBUNDLE_UCODE \ +{\ +0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \ +0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \ +0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \ +0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \ +0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \ +0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \ +0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +0x00000000, 0x00000000, 0x00000000, 0x00000000, \ +} + static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) { - int i; - static const u32 ucode[UCODE_SIZE] = { - /* NFS packets are misinterpreted as TCO packets and - * incorrectly routed to the BMC over SMBus. This - * microcode patch checks the fragmented IP bit in the - * NFS/UDP header to distinguish between NFS and TCO. */ - 0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, - 0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, - 0x00906EFD, 0x00900EFD, 0x00E00EF8, - }; +/* *INDENT-OFF* */ + static struct { + u32 ucode[UCODE_SIZE + 1]; + u8 mac; + u8 timer_dword; + u8 bundle_dword; + u8 min_size_dword; + } ucode_opts[] = { + { D101M_B_RCVBUNDLE_UCODE, + mac_82559_D101M, + D101M_CPUSAVER_TIMER_DWORD, + D101M_CPUSAVER_BUNDLE_DWORD, + D101M_CPUSAVER_MIN_SIZE_DWORD }, + { D101S_RCVBUNDLE_UCODE, + mac_82559_D101S, + D101S_CPUSAVER_TIMER_DWORD, + D101S_CPUSAVER_BUNDLE_DWORD, + D101S_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_F, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { D102_E_RCVBUNDLE_UCODE, + mac_82551_10, + D102_E_CPUSAVER_TIMER_DWORD, + D102_E_CPUSAVER_BUNDLE_DWORD, + D102_E_CPUSAVER_MIN_SIZE_DWORD }, + { {0}, 0, 0, 0, 0} + }, *opts; +/* *INDENT-ON* */ - if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) { - for(i = 0; i < UCODE_SIZE; i++) +/************************************************************************* +* CPUSaver parameters +* +* All CPUSaver parameters are 16-bit literals that are part of a +* "move immediate value" instruction. By changing the value of +* the literal in the instruction before the code is loaded, the +* driver can change the algorithm. +* +* INTDELAY - This loads the dead-man timer with its inital value. +* When this timer expires the interrupt is asserted, and the +* timer is reset each time a new packet is received. (see +* BUNDLEMAX below to set the limit on number of chained packets) +* The current default is 0x600 or 1536. Experiments show that +* the value should probably stay within the 0x200 - 0x1000. +* +* BUNDLEMAX - +* This sets the maximum number of frames that will be bundled. In +* some situations, such as the TCP windowing algorithm, it may be +* better to limit the growth of the bundle size than let it go as +* high as it can, because that could cause too much added latency. +* The default is six, because this is the number of packets in the +* default TCP window size. A value of 1 would make CPUSaver indicate +* an interrupt for every frame received. If you do not want to put +* a limit on the bundle size, set this value to xFFFF. +* +* BUNDLESMALL - +* This contains a bit-mask describing the minimum size frame that +* will be bundled. The default masks the lower 7 bits, which means +* that any frame less than 128 bytes in length will not be bundled, +* but will instead immediately generate an interrupt. This does +* not affect the current bundle in any way. Any frame that is 128 +* bytes or large will be bundled normally. This feature is meant +* to provide immediate indication of ACK frames in a TCP environment. +* Customers were seeing poor performance when a machine with CPUSaver +* enabled was sending but not receiving. The delay introduced when +* the ACKs were received was enough to reduce total throughput, because +* the sender would sit idle until the ACK was finally seen. +* +* The current default is 0xFF80, which masks out the lower 7 bits. +* This means that any frame which is x7F (127) bytes or smaller +* will cause an immediate interrupt. Because this value must be a +* bit mask, there are only a few valid values that can be used. To +* turn this feature off, the driver can write the value xFFFF to the +* lower word of this instruction (in the same way that the other +* parameters are used). Likewise, a value of 0xF800 (2047) would +* cause an interrupt to be generated for every frame, because all +* standard Ethernet frames are <= 2047 bytes in length. +*************************************************************************/ + +/* if you wish to disable the ucode functionality, while maintaining the + * workarounds it provides, set the following defines to: + * BUNDLESMALL 0 + * BUNDLEMAX 1 + * INTDELAY 1 + */ +#define BUNDLESMALL 1 +#define BUNDLEMAX (u16)6 +#define INTDELAY (u16)1536 /* 0x600 */ + + /* do not load u-code for ICH devices */ + if (nic->flags & ich) + goto noloaducode; + + /* Search for ucode match against h/w rev_id */ + for (opts = ucode_opts; opts->mac; opts++) { + int i; + u32 *ucode = opts->ucode; + if (nic->mac != opts->mac) + continue; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for (i = 0; i < UCODE_SIZE; i++) cb->u.ucode[i] = cpu_to_le32(ucode[i]); cb->command = cpu_to_le16(cb_ucode); - } else - cb->command = cpu_to_le16(cb_nop); + return; + } + +noloaducode: + cb->command = cpu_to_le16(cb_nop); } static void e100_setup_iaaddr(struct nic *nic, struct cb *cb, diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig index 94e7a9af8705..a84c232395e3 100644 --- a/drivers/net/fec_8xx/Kconfig +++ b/drivers/net/fec_8xx/Kconfig @@ -1,6 +1,6 @@ config FEC_8XX tristate "Motorola 8xx FEC driver" - depends on NET_ETHERNET && FEC + depends on NET_ETHERNET && 8xx select MII config FEC_8XX_GENERIC_PHY diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c index 6a3129bc15a6..9b8295ee06ef 100644 --- a/drivers/net/ioc3-eth.c +++ b/drivers/net/ioc3-eth.c @@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = { static int __init ioc3_init_module(void) { - return pci_module_init(&ioc3_driver); + return pci_register_driver(&ioc3_driver); } static void __exit ioc3_cleanup_module(void) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 159b56a56ef4..14a76f7cf900 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { if (netif_msg_probe(tp)) { printk(KERN_ERR PFX - "Cannot find PowerManagement capability. " - "Aborting.\n"); + "PowerManagement capability not found.\n"); } - goto err_out_mwi; } /* make sure PCI base addr 1 is MMIO */ @@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) } while (boguscnt > 0); if (boguscnt <= 0) { - if (net_ratelimit() && netif_msg_intr(tp)) { + if (netif_msg_intr(tp) && net_ratelimit() ) { printk(KERN_WARNING "%s: Too much work at interrupt!\n", dev->name); } diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h index 9e9da6b4080f..a7e9d29a86a7 100644 --- a/drivers/net/saa9730.h +++ b/drivers/net/saa9730.h @@ -1,6 +1,7 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki * * ######################################################################## * @@ -265,6 +266,7 @@ /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */ #define SAA9730_LAN_REGS_ADDR 0x20400 +#define SAA9730_LAN_REGS_SIZE 0x00400 struct lan_saa9730_regmap { volatile unsigned int TxBuffA; /* 0x20400 */ @@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap; /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */ #define SAA9730_EVM_REGS_ADDR 0x02000 +#define SAA9730_EVM_REGS_SIZE 0x00400 struct evm_saa9730_regmap { volatile unsigned int InterruptStatus1; /* 0x2000 */ @@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap; struct lan_saa9730_private { + /* + * Rx/Tx packet buffers. + * The Rx and Tx packets must be PACKET_SIZE aligned. + */ + void *buffer_start; + unsigned int buffer_size; + + /* + * DMA address of beginning of this object, returned + * by pci_alloc_consistent(). + */ + dma_addr_t dma_addr; + + /* Pointer to the associated pci device structure */ + struct pci_dev *pci_dev; + /* Pointer for the SAA9730 LAN controller register set. */ t_lan_saa9730_regmap *lan_saa9730_regs; /* Pointer to the SAA9730 EVM register. */ t_evm_saa9730_regmap *evm_saa9730_regs; - /* TRUE if the next buffer to write is RxBuffA, FALSE if RxBuffB. */ - unsigned char NextRcvToUseIsA; /* Rcv buffer Index. */ unsigned char NextRcvPacketIndex; + /* Next buffer index. */ + unsigned char NextRcvBufferIndex; /* Index of next packet to use in that buffer. */ unsigned char NextTxmPacketIndex; @@ -353,13 +372,8 @@ struct lan_saa9730_private { unsigned char DmaRcvPackets; unsigned char DmaTxmPackets; - unsigned char RcvAIndex; /* index into RcvBufferSpace[] for Blk A */ - unsigned char RcvBIndex; /* index into RcvBufferSpace[] for Blk B */ - - unsigned int - TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE]; - unsigned int - RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE]; + void *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE]; + void *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE]; unsigned int TxBufferFree[LAN_SAA9730_BUFFERS]; unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6]; diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index c91e2e81f131..28bf2e69eb5e 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -154,6 +154,12 @@ MODULE_LICENSE("GPL"); */ #define MEMORY_WAIT_TIME 16 +/* + * The maximum number of processing loops allowed for each call to the + * IRQ handler. + */ +#define MAX_IRQ_LOOPS 8 + /* * This selects whether TX packets are sent one by one to the SMC91x internal * memory and throttled until transmission completes. This may prevent @@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsigned long data) /* queue the packet for TX */ SMC_SET_MMU_CMD(MC_ENQUEUE); - SMC_ACK_INT(IM_TX_EMPTY_INT); smc_special_unlock(&lp->lock); dev->trans_start = jiffies; @@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data) smc_phy_check_media(dev, 1); smc_phy_configure_exit: + SMC_SELECT_BANK(2); spin_unlock_irq(&lp->lock); lp->work_pending = 0; } @@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) SMC_SET_INT_MASK(0); /* set a timeout value, so I don't stay here forever */ - timeout = 8; + timeout = MAX_IRQ_LOOPS; do { status = SMC_GET_INT(); @@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* restore register states */ SMC_SET_PTR(saved_pointer); SMC_SET_INT_MASK(mask); - spin_unlock(&lp->lock); - DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout); + if (timeout == MAX_IRQ_LOOPS) + PRINTK("%s: spurious interrupt (mask = 0x%02x)\n", + dev->name, mask); + DBG(3, "%s: Interrupt done (%d loops)\n", + dev->name, MAX_IRQ_LOOPS - timeout); /* * We return IRQ_HANDLED unconditionally here even if there was diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index a01efa6d5c62..1fd04662c4fc 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb) "uptime %ud%uh%um%us)\n", dev->name, days, hrs, min, sec); +#if 0 netif_carrier_on(dev); +#endif hdlc->state.cisco.up = 1; } } @@ -225,7 +227,9 @@ static void cisco_timer(unsigned long arg) hdlc->state.cisco.settings.timeout * HZ)) { hdlc->state.cisco.up = 0; printk(KERN_INFO "%s: Link down\n", dev->name); +#if 0 netif_carrier_off(dev); +#endif } cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, @@ -261,8 +265,10 @@ static void cisco_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); del_timer_sync(&hdlc->state.cisco.timer); +#if 0 if (netif_carrier_ok(dev)) netif_carrier_off(dev); +#endif hdlc->state.cisco.up = 0; hdlc->state.cisco.request_sent = 0; } diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index e1601d35dced..523afe17564e 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -545,8 +545,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev) hdlc->state.fr.reliable = reliable; if (reliable) { +#if 0 if (!netif_carrier_ok(dev)) netif_carrier_on(dev); +#endif hdlc->state.fr.n391cnt = 0; /* Request full status */ hdlc->state.fr.dce_changed = 1; @@ -560,8 +562,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev) } } } else { +#if 0 if (netif_carrier_ok(dev)) netif_carrier_off(dev); +#endif while (pvc) { /* Deactivate all PVCs */ pvc_carrier(0, pvc); diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c index cdd4c09c2d90..46cef8f92133 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc_generic.c @@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct net_device *dev) hdlc_device *hdlc = dev_to_hdlc(dev); if (hdlc->proto.start) return hdlc->proto.start(dev); +#if 0 #ifdef DEBUG_LINK if (netif_carrier_ok(dev)) printk(KERN_ERR "hdlc_set_carrier_on(): already on\n"); #endif netif_carrier_on(dev); +#endif } @@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struct net_device *dev) if (hdlc->proto.stop) return hdlc->proto.stop(dev); +#if 0 #ifdef DEBUG_LINK if (!netif_carrier_ok(dev)) printk(KERN_ERR "hdlc_set_carrier_off(): already off\n"); #endif netif_carrier_off(dev); +#endif } @@ -294,8 +298,10 @@ int register_hdlc_device(struct net_device *dev) if (result != 0) return -EIO; +#if 0 if (netif_carrier_ok(dev)) netif_carrier_off(dev); /* no carrier until DCD goes up */ +#endif return 0; } diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c index 579480dad374..346c6febb033 100644 --- a/drivers/net/wireless/hermes.c +++ b/drivers/net/wireless/hermes.c @@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) * * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware */ -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; @@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, * * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware */ -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; @@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, * * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware */ -int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len, +int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len, u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h index a6bd472d75d4..7644f72a9f4e 100644 --- a/drivers/net/wireless/hermes.h +++ b/drivers/net/wireless/hermes.h @@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, struct hermes_response *resp); int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len, +int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, u16 id, u16 offset); -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len, +int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, u16 id, u16 offset); int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, - unsigned data_len, unsigned len, u16 id, u16 offset); + unsigned data_len, int len, u16 id, u16 offset); int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, u16 *length, void *buf); int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h index 33acb8add4d6..afac5c7a323d 100644 --- a/drivers/net/wireless/i82593.h +++ b/drivers/net/wireless/i82593.h @@ -7,11 +7,16 @@ * * Copyright 1994, Anders Klemets * - * This software may be freely distributed for noncommercial purposes - * as long as this notice is retained. - * * HISTORY * i82593.h,v + * Revision 1.4 2005/11/4 09:15:00 baroniunas + * Modified copyright with permission of author as follows: + * + * "If I82539.H is the only file with my copyright statement + * that is included in the Source Forge project, then you have + * my approval to change the copyright statement to be a GPL + * license, in the way you proposed on October 10." + * * Revision 1.1 1996/07/17 15:23:12 root * Initial revision * diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index a2e6214169e9..77d2a21d4cd0 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, dev->ethtool_ops = &ipw2100_ethtool_ops; dev->tx_timeout = ipw2100_tx_timeout; dev->wireless_handlers = &ipw2100_wx_handler_def; - dev->get_wireless_stats = ipw2100_wx_wireless_stats; + priv->wireless_data.ieee80211 = priv->ieee; + dev->wireless_data = &priv->wireless_data; dev->set_mac_address = ipw2100_set_address; dev->watchdog_timeo = 3 * HZ; dev->irq = 0; @@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct net_device *dev, } range->num_frequency = val; + /* Event capability (kernel + driver) */ + range->event_capa[0] = (IW_EVENT_CAPA_K_0 | + IW_EVENT_CAPA_MASK(SIOCGIWAP)); + range->event_capa[1] = IW_EVENT_CAPA_K_1; + IPW_DEBUG_WX("GET Range\n"); return 0; @@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handler[] = { #endif /* CONFIG_IPW2100_MONITOR */ }; -static struct iw_handler_def ipw2100_wx_handler_def = { - .standard = ipw2100_wx_handlers, - .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler), - .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler), - .num_private_args = sizeof(ipw2100_private_args) / - sizeof(struct iw_priv_args), - .private = (iw_handler *) ipw2100_private_handler, - .private_args = (struct iw_priv_args *)ipw2100_private_args, -}; - /* * Get wireless statistics. * Called by /proc/net/wireless @@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) return (struct iw_statistics *)NULL; } +static struct iw_handler_def ipw2100_wx_handler_def = { + .standard = ipw2100_wx_handlers, + .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler), + .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler), + .num_private_args = sizeof(ipw2100_private_args) / + sizeof(struct iw_priv_args), + .private = (iw_handler *) ipw2100_private_handler, + .private_args = (struct iw_priv_args *)ipw2100_private_args, + .get_wireless_stats = ipw2100_wx_wireless_stats, +}; + static void ipw2100_wx_event_work(struct ipw2100_priv *priv) { union iwreq_data wrqu; diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 140fdf2a0a09..7c65b10bb164 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -571,6 +571,8 @@ struct ipw2100_priv { struct net_device *net_dev; struct iw_statistics wstats; + struct iw_public_data wireless_data; + struct tasklet_struct irq_tasklet; struct workqueue_struct *workqueue; diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index b0d195d1721a..5e7c7e944c9d 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1110,8 +1110,7 @@ static struct ipw_fw_error *ipw_alloc_error_log(struct ipw_priv *priv) error->elem_len = elem_len; error->log_len = log_len; error->elem = (struct ipw_error_elem *)error->payload; - error->log = (struct ipw_event *)(error->elem + - (sizeof(*error->elem) * elem_len)); + error->log = (struct ipw_event *)(error->elem + elem_len); ipw_capture_event_log(priv, log_len, error->log); @@ -8926,6 +8925,10 @@ static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid, struct ipw_scan_request_ext scan; int err = 0, scan_type; + if (!(priv->status & STATUS_INIT) || + (priv->status & STATUS_EXIT_PENDING)) + return 0; + down(&priv->sem); if (priv->status & STATUS_RF_KILL_MASK) { diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c index 109a96d90007..23deee69974b 100644 --- a/drivers/net/wireless/prism54/isl_38xx.c +++ b/drivers/net/wireless/prism54/isl_38xx.c @@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) /* assert the Wakeup interrupt in the Device Interrupt Register */ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP, ISL38XX_DEV_INT_REG); + +#if VERBOSE > SHOW_ERROR_MESSAGES udelay(ISL38XX_WRITEIO_DELAY); /* perform another read on the Device Status Register */ reg = readl(device_base + ISL38XX_CTRL_STAT_REG); - -#if VERBOSE > SHOW_ERROR_MESSAGES do_gettimeofday(¤t_time); DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", current_time.tv_sec, (long)current_time.tv_usec, reg); diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index a39fbfef789a..19657efa8dc3 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -700,6 +700,28 @@ static unsigned int iosapic_startup_irq(unsigned int irq) return 0; } +#ifdef CONFIG_SMP +static void iosapic_set_affinity_irq(unsigned int irq, cpumask_t dest) +{ + struct vector_info *vi = iosapic_get_vector(irq); + u32 d0, d1, dummy_d0; + unsigned long flags; + + if (cpu_check_affinity(irq, &dest)) + return; + + vi->txn_addr = txn_affinity_addr(irq, first_cpu(dest)); + + spin_lock_irqsave(&iosapic_lock, flags); + /* d1 contains the destination CPU, so only want to set that + * entry */ + iosapic_rd_irt_entry(vi, &d0, &d1); + iosapic_set_irt_data(vi, &dummy_d0, &d1); + iosapic_wr_irt_entry(vi, d0, d1); + spin_unlock_irqrestore(&iosapic_lock, flags); +} +#endif + static struct hw_interrupt_type iosapic_interrupt_type = { .typename = "IO-SAPIC-level", .startup = iosapic_startup_irq, @@ -708,7 +730,9 @@ static struct hw_interrupt_type iosapic_interrupt_type = { .disable = iosapic_disable_irq, .ack = no_ack_irq, .end = iosapic_end_irq, -// .set_affinity = iosapic_set_affinity_irq, +#ifdef CONFIG_SMP + .set_affinity = iosapic_set_affinity_irq, +#endif }; int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev) diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index bab3bcabcb6e..d14888e149bb 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -24,6 +24,9 @@ * Major changes to get basic interrupt infrastructure working to * hopefully be able to support all SuperIO devices. Currently * works with serial. -- John Marvin + * + * Converted superio_init() to be a PCI_FIXUP_FINAL callee. + * -- Kyle McMartin */ @@ -141,10 +144,10 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs) } /* Initialize Super I/O device */ - -static void __devinit -superio_init(struct superio_device *sio) +static void +superio_init(struct pci_dev *pcidev) { + struct superio_device *sio = &sio_dev; struct pci_dev *pdev = sio->lio_pdev; u16 word; @@ -160,8 +163,8 @@ superio_init(struct superio_device *sio) /* ...then properly fixup the USB to point at suckyio PIC */ sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev); - printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n", - pci_name(pdev),pdev->irq); + printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n", + pci_name(pdev), pdev->irq); pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base); sio->sp1_base &= ~1; @@ -274,7 +277,7 @@ superio_init(struct superio_device *sio) sio->suckyio_irq_enabled = 1; } - +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init); static void superio_disable_irq(unsigned int irq) { @@ -452,8 +455,10 @@ static void superio_fixup_pci(struct pci_dev *pdev) DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci); -static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id) +static int __devinit +superio_probe(struct pci_dev *dev, const struct pci_device_id *id) { + struct superio_device *sio = &sio_dev; /* ** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a @@ -466,7 +471,8 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_ dev->subsystem_vendor, dev->subsystem_device, dev->class); - superio_init(&sio_dev); + if (!sio->suckyio_irq_enabled) + BUG(); /* Enabled by PCI_FIXUP_FINAL */ if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */ superio_parport_init(); @@ -481,19 +487,21 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_ DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n"); } - /* Let appropriate other driver claim this device. */ + /* Let appropriate other driver claim this device. */ return -ENODEV; } static struct pci_device_id superio_tbl[] = { - { PCI_VENDOR_ID_NS, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) }, { 0, } }; static struct pci_driver superio_driver = { - .name = "SuperIO", - .id_table = superio_tbl, - .probe = superio_probe, + .name = "SuperIO", + .id_table = superio_tbl, + .probe = superio_probe, }; static int __init superio_modinit(void) @@ -506,6 +514,5 @@ static void __exit superio_exit(void) pci_unregister_driver(&superio_driver); } - module_init(superio_modinit); module_exit(superio_exit); diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index f5b7d360fc10..1026f2bc3185 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -1179,12 +1179,12 @@ raw3270_create_attributes(struct raw3270 *rp) //FIXME: check return code sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group); rp->clttydev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_TTY3270_MAJOR, rp->minor), &rp->cdev->dev, "tty%s", rp->cdev->dev.bus_id); rp->cltubdev = - class_device_create(class3270, + class_device_create(class3270, NULL, MKDEV(IBM_FS3270_MAJOR, rp->minor), &rp->cdev->dev, "tub%s", rp->cdev->dev.bus_id); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 84c42c44e04d..20dd85a77813 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -497,7 +497,7 @@ config SCSI_ATA_PIIX If unsure, say N. config SCSI_SATA_MV - tristate "Marvell SATA support" + tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" depends on SCSI_SATA && PCI && EXPERIMENTAL help This option enables support for the Marvell Serial ATA family. diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 894e7113e0b3..83467a05dc8e 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -48,7 +48,7 @@ #include #define DRV_NAME "ahci" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.2" enum { @@ -558,23 +558,25 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16); } -static void ahci_intr_error(struct ata_port *ap, u32 irq_stat) +static void ahci_restart_port(struct ata_port *ap, u32 irq_stat) { void __iomem *mmio = ap->host_set->mmio_base; void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no); u32 tmp; int work; - printk(KERN_WARNING "ata%u: port reset, " - "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", - ap->id, - irq_stat, - readl(mmio + HOST_IRQ_STAT), - readl(port_mmio + PORT_IRQ_STAT), - readl(port_mmio + PORT_CMD), - readl(port_mmio + PORT_TFDATA), - readl(port_mmio + PORT_SCR_STAT), - readl(port_mmio + PORT_SCR_ERR)); + if ((ap->device[0].class != ATA_DEV_ATAPI) || + ((irq_stat & PORT_IRQ_TF_ERR) == 0)) + printk(KERN_WARNING "ata%u: port reset, " + "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n", + ap->id, + irq_stat, + readl(mmio + HOST_IRQ_STAT), + readl(port_mmio + PORT_IRQ_STAT), + readl(port_mmio + PORT_CMD), + readl(port_mmio + PORT_TFDATA), + readl(port_mmio + PORT_SCR_STAT), + readl(port_mmio + PORT_SCR_ERR)); /* stop DMA */ tmp = readl(port_mmio + PORT_CMD); @@ -632,7 +634,7 @@ static void ahci_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); } else { - ahci_intr_error(ap, readl(port_mmio + PORT_IRQ_STAT)); + ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT)); /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. @@ -677,7 +679,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc) err_mask = AC_ERR_HOST_BUS; /* command processing has stopped due to error; restart */ - ahci_intr_error(ap, status); + ahci_restart_port(ap, status); if (qc) ata_qc_complete(qc, err_mask); diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 855428ff37e9..333d69dd84ef 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -50,7 +50,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.04" +#define DRV_VERSION "1.05" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index e1960d69fb90..4cb1f3ed9100 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -784,8 +784,8 @@ static ide_proc_entry_t idescsi_proc[] = { #endif static ide_driver_t idescsi_driver = { - .owner = THIS_MODULE, .gen_driver = { + .owner = THIS_MODULE, .name = "ide-scsi", .bus = &ide_bus_type, .probe = ide_scsi_probe, diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ba1eb8b38e00..665ae79e1fd6 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1046,6 +1046,30 @@ static unsigned int ata_pio_modes(const struct ata_device *adev) return modes; } +static int ata_qc_wait_err(struct ata_queued_cmd *qc, + struct completion *wait) +{ + int rc = 0; + + if (wait_for_completion_timeout(wait, 30 * HZ) < 1) { + /* timeout handling */ + unsigned int err_mask = ac_err_mask(ata_chk_status(qc->ap)); + + if (!err_mask) { + printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n", + qc->ap->id, qc->tf.command); + } else { + printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n", + qc->ap->id, qc->tf.command); + rc = -EIO; + } + + ata_qc_complete(qc, err_mask); + } + + return rc; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1125,7 +1149,7 @@ retry: if (rc) goto err_out; else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); spin_lock_irqsave(&ap->host_set->lock, flags); ap->ops->tf_read(ap, &qc->tf); @@ -1570,11 +1594,13 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, /* * Find the mode. - */ + */ if (!(s = ata_timing_find_mode(speed))) return -EINVAL; + memcpy(t, s, sizeof(*s)); + /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. @@ -1595,7 +1621,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, * Convert the timing to bus clock counts. */ - ata_timing_quantize(s, t, T, UT); + ata_timing_quantize(t, t, T, UT); /* * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T @@ -2267,7 +2293,7 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) if (rc) ata_port_disable(ap); else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); DPRINTK("EXIT\n"); } @@ -2315,7 +2341,7 @@ static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) if (rc) goto err_out; - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); swap_buf_le16(dev->id, ATA_ID_WORDS); @@ -2371,7 +2397,7 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) if (rc) ata_port_disable(ap); else - wait_for_completion(&wait); + ata_qc_wait_err(qc, &wait); DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 74a84e0ec0a4..8ebaa694d18e 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -29,7 +29,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.12" /* must be exactly four chars */ +#define DRV_VERSION "1.20" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 257c128f4aaa..ab7432a5778e 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1,7 +1,8 @@ /* * sata_mv.c - Marvell SATA support * - * Copyright 2005: EMC Corporation, all rights reserved. + * Copyright 2005: EMC Corporation, all rights reserved. + * Copyright 2005 Red Hat, Inc. All rights reserved. * * Please ALWAYS copy linux-ide@vger.kernel.org on emails. * @@ -36,7 +37,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.25" +#define DRV_VERSION "0.5" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -50,6 +51,9 @@ enum { MV_PCI_REG_BASE = 0, MV_IRQ_COAL_REG_BASE = 0x18000, /* 6xxx part only */ MV_SATAHC0_REG_BASE = 0x20000, + MV_FLASH_CTL = 0x1046c, + MV_GPIO_PORT_CTL = 0x104f0, + MV_RESET_CFG = 0x180d8, MV_PCI_REG_SZ = MV_MAJOR_REG_AREA_SZ, MV_SATAHC_REG_SZ = MV_MAJOR_REG_AREA_SZ, @@ -72,11 +76,6 @@ enum { MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), - /* Our DMA boundary is determined by an ePRD being unable to handle - * anything larger than 64KB - */ - MV_DMA_BOUNDARY = 0xffffU, - MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, @@ -86,16 +85,9 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | - MV_FLAG_GLBL_SFT_RST), - - chip_504x = 0, - chip_508x = 1, - chip_604x = 2, - chip_608x = 3, + MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE, CRQB_FLAG_READ = (1 << 0), CRQB_TAG_SHIFT = 1, @@ -116,8 +108,19 @@ enum { PCI_MASTER_EMPTY = (1 << 3), GLOB_SFT_RST = (1 << 4), - PCI_IRQ_CAUSE_OFS = 0x1d58, - PCI_IRQ_MASK_OFS = 0x1d5c, + MV_PCI_MODE = 0xd00, + MV_PCI_EXP_ROM_BAR_CTL = 0xd2c, + MV_PCI_DISC_TIMER = 0xd04, + MV_PCI_MSI_TRIGGER = 0xc38, + MV_PCI_SERR_MASK = 0xc28, + MV_PCI_XBAR_TMOUT = 0x1d04, + MV_PCI_ERR_LOW_ADDRESS = 0x1d40, + MV_PCI_ERR_HIGH_ADDRESS = 0x1d44, + MV_PCI_ERR_ATTRIBUTE = 0x1d48, + MV_PCI_ERR_COMMAND = 0x1d50, + + PCI_IRQ_CAUSE_OFS = 0x1d58, + PCI_IRQ_MASK_OFS = 0x1d5c, PCI_UNMASK_ALL_IRQS = 0x7fffff, /* bits 22-0 */ HC_MAIN_IRQ_CAUSE_OFS = 0x1d60, @@ -134,7 +137,7 @@ enum { SELF_INT = (1 << 23), TWSI_INT = (1 << 24), HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */ - HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | + HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT | HC_MAIN_RSVD), @@ -153,6 +156,15 @@ enum { /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ SATA_ACTIVE_OFS = 0x350, + PHY_MODE3 = 0x310, + PHY_MODE4 = 0x314, + PHY_MODE2 = 0x330, + MV5_PHY_MODE = 0x74, + MV5_LT_MODE = 0x30, + MV5_PHY_CTL = 0x0C, + SATA_INTERFACE_CTL = 0x050, + + MV_M2_PREAMP_MASK = 0x7e0, /* Port registers */ EDMA_CFG_OFS = 0, @@ -182,17 +194,16 @@ enum { EDMA_ERR_LNK_CTRL_TX = (0x1f << 21), EDMA_ERR_LNK_DATA_TX = (0x1f << 26), EDMA_ERR_TRANS_PROTO = (1 << 31), - EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | + EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR | EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR | - EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | + EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 | EDMA_ERR_LNK_DATA_RX | - EDMA_ERR_LNK_DATA_TX | + EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), EDMA_REQ_Q_BASE_HI_OFS = 0x10, EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ - EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, EDMA_REQ_Q_OUT_PTR_OFS = 0x18, EDMA_REQ_Q_PTR_SHIFT = 5, @@ -200,7 +211,6 @@ enum { EDMA_RSP_Q_BASE_HI_OFS = 0x1c, EDMA_RSP_Q_IN_PTR_OFS = 0x20, EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ - EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, EDMA_RSP_Q_PTR_SHIFT = 3, EDMA_CMD_OFS = 0x28, @@ -208,14 +218,44 @@ enum { EDMA_DS = (1 << 1), ATA_RST = (1 << 2), + EDMA_IORDY_TMOUT = 0x34, + EDMA_ARB_CFG = 0x38, + /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), + MV_HP_ERRATA_50XXB0 = (1 << 1), + MV_HP_ERRATA_50XXB2 = (1 << 2), + MV_HP_ERRATA_60X1B2 = (1 << 3), + MV_HP_ERRATA_60X1C0 = (1 << 4), + MV_HP_50XX = (1 << 5), /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; +#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX) +#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0) + +enum { + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, + + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, +}; + +enum chip_type { + chip_504x, + chip_508x, + chip_5080, + chip_604x, + chip_608x, +}; + /* Command ReQuest Block: 32B */ struct mv_crqb { u32 sg_addr; @@ -252,14 +292,37 @@ struct mv_port_priv { u32 pp_flags; }; +struct mv_port_signal { + u32 amps; + u32 pre; +}; + +struct mv_host_priv; +struct mv_hw_ops { + void (*phy_errata)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); + void (*enable_leds)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*read_preamp)(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); + int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); + void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); + void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); +}; + struct mv_host_priv { u32 hp_flags; + struct mv_port_signal signal[8]; + const struct mv_hw_ops *ops; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in); +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); +static void __mv_phy_reset(struct ata_port *ap, int can_sleep); static void mv_host_stop(struct ata_host_set *host_set); static int mv_port_start(struct ata_port *ap); static void mv_port_stop(struct ata_port *ap); @@ -270,6 +333,29 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port); +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio); +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc); +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no); +static void mv_stop_and_reset(struct ata_port *ap); + static struct scsi_host_template mv_sht = { .module = THIS_MODULE, .name = DRV_NAME, @@ -278,7 +364,7 @@ static struct scsi_host_template mv_sht = { .eh_strategy_handler = ata_scsi_error, .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT, + .sg_tablesize = MV_MAX_SG_CT / 2, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, @@ -290,7 +376,34 @@ static struct scsi_host_template mv_sht = { .ordered_flush = 1, }; -static const struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv5_ops = { + .port_disable = ata_port_disable, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .phy_reset = mv_phy_reset, + + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, + + .eng_timeout = mv_eng_timeout, + + .irq_handler = mv_interrupt, + .irq_clear = mv_irq_clear, + + .scr_read = mv5_scr_read, + .scr_write = mv5_scr_write, + + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, +}; + +static const struct ata_port_operations mv6_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -322,37 +435,44 @@ static struct ata_port_info mv_port_info[] = { .sht = &mv_sht, .host_flags = MV_COMMON_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ - .port_ops = &mv_ops, + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, }, { /* chip_508x */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ - .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ - .port_ops = &mv_ops, + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, + }, + { /* chip_5080 */ + .sht = &mv_sht, + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &mv5_ops, }, { /* chip_604x */ .sht = &mv_sht, .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_ops, + .port_ops = &mv6_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | MV_FLAG_DUAL_HC), .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 */ - .port_ops = &mv_ops, + .port_ops = &mv6_ops, }, }; static const struct pci_device_id mv_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5040), 0, 0, chip_504x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5041), 0, 0, chip_504x}, - {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_508x}, + {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5080), 0, 0, chip_5080}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5081), 0, 0, chip_508x}, {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x}, @@ -371,6 +491,24 @@ static struct pci_driver mv_pci_driver = { .remove = ata_pci_remove_one, }; +static const struct mv_hw_ops mv5xxx_ops = { + .phy_errata = mv5_phy_errata, + .enable_leds = mv5_enable_leds, + .read_preamp = mv5_read_preamp, + .reset_hc = mv5_reset_hc, + .reset_flash = mv5_reset_flash, + .reset_bus = mv5_reset_bus, +}; + +static const struct mv_hw_ops mv6xxx_ops = { + .phy_errata = mv6_phy_errata, + .enable_leds = mv6_enable_leds, + .read_preamp = mv6_read_preamp, + .reset_hc = mv6_reset_hc, + .reset_flash = mv6_reset_flash, + .reset_bus = mv_reset_pci_bus, +}; + /* * Functions */ @@ -386,11 +524,27 @@ static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); } +static inline unsigned int mv_hc_from_port(unsigned int port) +{ + return port >> MV_PORT_HC_SHIFT; +} + +static inline unsigned int mv_hardport_from_port(unsigned int port) +{ + return port & MV_PORT_MASK; +} + +static inline void __iomem *mv_hc_base_from_port(void __iomem *base, + unsigned int port) +{ + return mv_hc_base(base, mv_hc_from_port(port)); +} + static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port) { - return (mv_hc_base(base, port >> MV_PORT_HC_SHIFT) + - MV_SATAHC_ARBTR_REG_SZ + - ((port & MV_PORT_MASK) * MV_PORT_REG_SZ)); + return mv_hc_base_from_port(base, port) + + MV_SATAHC_ARBTR_REG_SZ + + (mv_hardport_from_port(port) * MV_PORT_REG_SZ); } static inline void __iomem *mv_ap_base(struct ata_port *ap) @@ -398,9 +552,9 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long hp_flags) +static inline int mv_get_hc_count(unsigned long host_flags) { - return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((host_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } static void mv_irq_clear(struct ata_port *ap) @@ -452,7 +606,7 @@ static void mv_stop_dma(struct ata_port *ap) } else { assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); } - + /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { reg = readl(port_mmio + EDMA_CMD_OFS); @@ -503,7 +657,7 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port, struct pci_dev *pdev) { #ifdef ATA_DEBUG - void __iomem *hc_base = mv_hc_base(mmio_base, + void __iomem *hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); void __iomem *port_base; int start_port, num_ports, p, start_hc, num_hcs, hc; @@ -517,7 +671,7 @@ static void mv_dump_all_regs(void __iomem *mmio_base, int port, start_port = port; num_ports = num_hcs = 1; } - DPRINTK("All registers for port(s) %u-%u:\n", start_port, + DPRINTK("All registers for port(s) %u-%u:\n", start_port, num_ports > 1 ? num_ports - 1 : start_port); if (NULL != pdev) { @@ -584,70 +738,6 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -/** - * mv_global_soft_reset - Perform the 6xxx global soft reset - * @mmio_base: base address of the HBA - * - * This routine only applies to 6xxx parts. - * - * LOCKING: - * Inherited from caller. - */ -static int mv_global_soft_reset(void __iomem *mmio_base) -{ - void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; - int i, rc = 0; - u32 t; - - /* Following procedure defined in PCI "main command and status - * register" table. - */ - t = readl(reg); - writel(t | STOP_PCI_MASTER, reg); - - for (i = 0; i < 1000; i++) { - udelay(1); - t = readl(reg); - if (PCI_MASTER_EMPTY & t) { - break; - } - } - if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); - rc = 1; - goto done; - } - - /* set reset */ - i = 5; - do { - writel(t | GLOB_SFT_RST, reg); - t = readl(reg); - udelay(1); - } while (!(GLOB_SFT_RST & t) && (i-- > 0)); - - if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME ": can't set global reset\n"); - rc = 1; - goto done; - } - - /* clear reset and *reenable the PCI master* (not mentioned in spec) */ - i = 5; - do { - writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); - t = readl(reg); - udelay(1); - } while ((GLOB_SFT_RST & t) && (i-- > 0)); - - if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); - rc = 1; - } -done: - return rc; -} - /** * mv_host_stop - Host specific cleanup/stop routine. * @host_set: host data structure @@ -701,7 +791,7 @@ static int mv_port_start(struct ata_port *ap) goto err_out; memset(pp, 0, sizeof(*pp)); - mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, GFP_KERNEL); if (!mem) goto err_out_pp; @@ -711,7 +801,7 @@ static int mv_port_start(struct ata_port *ap) if (rc) goto err_out_priv; - /* First item in chunk of DMA memory: + /* First item in chunk of DMA memory: * 32-slot command request table (CRQB), 32 bytes each in size */ pp->crqb = mem; @@ -719,7 +809,7 @@ static int mv_port_start(struct ata_port *ap) mem += MV_CRQB_Q_SZ; mem_dma += MV_CRQB_Q_SZ; - /* Second item: + /* Second item: * 32-slot command response table (CRPB), 8 bytes each in size */ pp->crpb = mem; @@ -733,18 +823,18 @@ static int mv_port_start(struct ata_port *ap) pp->sg_tbl = mem; pp->sg_tbl_dma = mem_dma; - writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); - writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); pp->req_producer = pp->rsp_consumer = 0; @@ -805,20 +895,30 @@ static void mv_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; ata_for_each_sg(sg, qc) { - u32 sg_len; dma_addr_t addr; + u32 sg_len, len, offset; addr = sg_dma_address(sg); sg_len = sg_dma_len(sg); - pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); - pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); - assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); - pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); - if (ata_sg_is_last(sg, qc)) - pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + while (sg_len) { + offset = addr & MV_DMA_BOUNDARY; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; - i++; + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + pp->sg_tbl[i].flags_size = cpu_to_le32(len); + + sg_len -= len; + addr += len; + + if (!sg_len && ata_sg_is_last(sg, qc)) + pp->sg_tbl[i].flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + + i++; + } } } @@ -859,7 +959,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) } /* the req producer index should be the same as we remember it */ - assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->req_producer); @@ -871,9 +971,9 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) assert(MV_MAX_Q_DEPTH > qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; - pp->crqb[pp->req_producer].sg_addr = + pp->crqb[pp->req_producer].sg_addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); - pp->crqb[pp->req_producer].sg_addr_hi = + pp->crqb[pp->req_producer].sg_addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); @@ -896,7 +996,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) #ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ case ATA_CMD_FPDMA_READ: case ATA_CMD_FPDMA_WRITE: - mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); break; #endif /* FIXME: remove this line when NCQ added */ @@ -962,7 +1062,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) pp->req_producer); /* until we do queuing, the queue should be empty at this point */ assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == - ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); mv_inc_q_index(&pp->req_producer); /* now incr producer index */ @@ -999,15 +1099,15 @@ static u8 mv_get_crpb_status(struct ata_port *ap) out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); /* the response consumer index should be the same as we remember it */ - assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->rsp_consumer); /* increment our consumer index... */ pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); - + /* and, until we do NCQ, there should only be 1 CRPB waiting */ - assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> - EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == pp->rsp_consumer); /* write out our inc'd consumer index so EDMA knows we're caught up */ @@ -1055,7 +1155,7 @@ static void mv_err_intr(struct ata_port *ap) /* check for fatal here and recover if needed */ if (EDMA_ERR_FATAL & edma_err_cause) { - mv_phy_reset(ap); + mv_stop_and_reset(ap); } } @@ -1120,6 +1220,10 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, handled++; } + if (ap && + (ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) + continue; + err_mask = ac_err_mask(ata_status); shift = port << 1; /* (port * 2) */ @@ -1131,14 +1235,15 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, err_mask |= AC_ERR_OTHER; handled++; } - + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); /* mark qc status appropriately */ - ata_qc_complete(qc, err_mask); + if (!(qc->tf.ctl & ATA_NIEN)) + ata_qc_complete(qc, err_mask); } } } @@ -1146,7 +1251,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, } /** - * mv_interrupt - + * mv_interrupt - * @irq: unused * @dev_instance: private data; in this case the host structure * @regs: unused @@ -1156,7 +1261,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, * routine to handle. Also check for PCI errors which are only * reported here. * - * LOCKING: + * LOCKING: * This routine holds the host_set lock while processing pending * interrupts. */ @@ -1202,8 +1307,422 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port) +{ + void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port); + unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL; + + return hc_mmio + ofs; +} + +static unsigned int mv5_scr_offset(unsigned int sc_reg_in) +{ + unsigned int ofs; + + switch (sc_reg_in) { + case SCR_STATUS: + case SCR_ERROR: + case SCR_CONTROL: + ofs = sc_reg_in * sizeof(u32); + break; + default: + ofs = 0xffffffffU; + break; + } + return ofs; +} + +static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + return readl(mmio + ofs); + else + return (u32) ofs; +} + +static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) +{ + void __iomem *mmio = mv5_phy_base(ap->host_set->mmio_base, ap->port_no); + unsigned int ofs = mv5_scr_offset(sc_reg_in); + + if (ofs != 0xffffffffU) + writelfl(val, mmio + ofs); +} + +static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u8 rev_id; + int early_5080; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + early_5080 = (pdev->device == 0x5080) && (rev_id == 0); + + if (!early_5080) { + u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= (1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); + } + + mv_reset_pci_bus(pdev, mmio); +} + +static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x0fcfffff, mmio + MV_FLASH_CTL); +} + +static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, idx); + u32 tmp; + + tmp = readl(phy_mmio + MV5_PHY_MODE); + + hpriv->signal[idx].pre = tmp & 0x1800; /* bits 12:11 */ + hpriv->signal[idx].amps = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + writel(0, mmio + MV_GPIO_PORT_CTL); + + /* FIXME: handle MV_HP_ERRATA_50XXB2 errata */ + + tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL); + tmp |= ~(1 << 0); + writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); +} + +static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *phy_mmio = mv5_phy_base(mmio, port); + const u32 mask = (1<<12) | (1<<11) | (1<<7) | (1<<6) | (1<<5); + u32 tmp; + int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0); + + if (fix_apm_sq) { + tmp = readl(phy_mmio + MV5_LT_MODE); + tmp |= (1 << 19); + writel(tmp, phy_mmio + MV5_LT_MODE); + + tmp = readl(phy_mmio + MV5_PHY_CTL); + tmp &= ~0x3; + tmp |= 0x1; + writel(tmp, phy_mmio + MV5_PHY_CTL); + } + + tmp = readl(phy_mmio + MV5_PHY_MODE); + tmp &= ~mask; + tmp |= hpriv->signal[port].pre; + tmp |= hpriv->signal[port].amps; + writel(tmp, phy_mmio + MV5_PHY_MODE); +} + + +#undef ZERO +#define ZERO(reg) writel(0, port_mmio + (reg)) +static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + + mv_channel_reset(hpriv, mmio, port); + + ZERO(0x028); /* command */ + writel(0x11f, port_mmio + EDMA_CFG_OFS); + ZERO(0x004); /* timer */ + ZERO(0x008); /* irq err cause */ + ZERO(0x00c); /* irq err mask */ + ZERO(0x010); /* rq bah */ + ZERO(0x014); /* rq inp */ + ZERO(0x018); /* rq outp */ + ZERO(0x01c); /* respq bah */ + ZERO(0x024); /* respq outp */ + ZERO(0x020); /* respq inp */ + ZERO(0x02c); /* test control */ + writel(0xbc, port_mmio + EDMA_IORDY_TMOUT); +} +#undef ZERO + +#define ZERO(reg) writel(0, hc_mmio + (reg)) +static void mv5_reset_one_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int hc) +{ + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + u32 tmp; + + ZERO(0x00c); + ZERO(0x010); + ZERO(0x014); + ZERO(0x018); + + tmp = readl(hc_mmio + 0x20); + tmp &= 0x1c1c1c1c; + tmp |= 0x03030303; + writel(tmp, hc_mmio + 0x20); +} +#undef ZERO + +static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + unsigned int hc, port; + + for (hc = 0; hc < n_hc; hc++) { + for (port = 0; port < MV_PORTS_PER_HC; port++) + mv5_reset_hc_port(hpriv, mmio, + (hc * MV_PORTS_PER_HC) + port); + + mv5_reset_one_hc(hpriv, mmio, hc); + } + + return 0; +} + +#undef ZERO +#define ZERO(reg) writel(0, mmio + (reg)) +static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) +{ + u32 tmp; + + tmp = readl(mmio + MV_PCI_MODE); + tmp &= 0xff00ffff; + writel(tmp, mmio + MV_PCI_MODE); + + ZERO(MV_PCI_DISC_TIMER); + ZERO(MV_PCI_MSI_TRIGGER); + writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT); + ZERO(HC_MAIN_IRQ_MASK_OFS); + ZERO(MV_PCI_SERR_MASK); + ZERO(PCI_IRQ_CAUSE_OFS); + ZERO(PCI_IRQ_MASK_OFS); + ZERO(MV_PCI_ERR_LOW_ADDRESS); + ZERO(MV_PCI_ERR_HIGH_ADDRESS); + ZERO(MV_PCI_ERR_ATTRIBUTE); + ZERO(MV_PCI_ERR_COMMAND); +} +#undef ZERO + +static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + u32 tmp; + + mv5_reset_flash(hpriv, mmio); + + tmp = readl(mmio + MV_GPIO_PORT_CTL); + tmp &= 0x3; + tmp |= (1 << 5) | (1 << 6); + writel(tmp, mmio + MV_GPIO_PORT_CTL); +} + /** - * mv_phy_reset - Perform eDMA reset followed by COMRESET + * mv6_reset_hc - Perform the 6xxx global soft reset + * @mmio: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int n_hc) +{ + void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS; + int i, rc = 0; + u32 t; + + /* Following procedure defined in PCI "main command and status + * register" table. + */ + t = readl(reg); + writel(t | STOP_PCI_MASTER, reg); + + for (i = 0; i < 1000; i++) { + udelay(1); + t = readl(reg); + if (PCI_MASTER_EMPTY & t) { + break; + } + } + if (!(PCI_MASTER_EMPTY & t)) { + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; + goto done; + } + + /* set reset */ + i = 5; + do { + writel(t | GLOB_SFT_RST, reg); + t = readl(reg); + udelay(1); + } while (!(GLOB_SFT_RST & t) && (i-- > 0)); + + if (!(GLOB_SFT_RST & t)) { + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; + goto done; + } + + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ + i = 5; + do { + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); + t = readl(reg); + udelay(1); + } while ((GLOB_SFT_RST & t) && (i-- > 0)); + + if (GLOB_SFT_RST & t) { + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; + } +done: + return rc; +} + +static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, + void __iomem *mmio) +{ + void __iomem *port_mmio; + u32 tmp; + + tmp = readl(mmio + MV_RESET_CFG); + if ((tmp & (1 << 0)) == 0) { + hpriv->signal[idx].amps = 0x7 << 8; + hpriv->signal[idx].pre = 0x1 << 5; + return; + } + + port_mmio = mv_port_base(mmio, idx); + tmp = readl(port_mmio + PHY_MODE2); + + hpriv->signal[idx].amps = tmp & 0x700; /* bits 10:8 */ + hpriv->signal[idx].pre = tmp & 0xe0; /* bits 7:5 */ +} + +static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio) +{ + writel(0x00000060, mmio + MV_GPIO_PORT_CTL); +} + +static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + + u32 hp_flags = hpriv->hp_flags; + int fix_phy_mode2 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + int fix_phy_mode4 = + hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); + u32 m2, tmp; + + if (fix_phy_mode2) { + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~(1 << 16); + m2 |= (1 << 31); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + + m2 = readl(port_mmio + PHY_MODE2); + m2 &= ~((1 << 16) | (1 << 31)); + writel(m2, port_mmio + PHY_MODE2); + + udelay(200); + } + + /* who knows what this magic does */ + tmp = readl(port_mmio + PHY_MODE3); + tmp &= ~0x7F800000; + tmp |= 0x2A800000; + writel(tmp, port_mmio + PHY_MODE3); + + if (fix_phy_mode4) { + u32 m4; + + m4 = readl(port_mmio + PHY_MODE4); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + tmp = readl(port_mmio + 0x310); + + m4 = (m4 & ~(1 << 1)) | (1 << 0); + + writel(m4, port_mmio + PHY_MODE4); + + if (hp_flags & MV_HP_ERRATA_60X1B2) + writel(tmp, port_mmio + 0x310); + } + + /* Revert values of pre-emphasis and signal amps to the saved ones */ + m2 = readl(port_mmio + PHY_MODE2); + + m2 &= ~MV_M2_PREAMP_MASK; + m2 |= hpriv->signal[port].amps; + m2 |= hpriv->signal[port].pre; + m2 &= ~(1 << 16); + + writel(m2, port_mmio + PHY_MODE2); +} + +static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, + unsigned int port_no) +{ + void __iomem *port_mmio = mv_port_base(mmio, port_no); + + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); + + if (IS_60XX(hpriv)) { + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 12) | (1 << 7); + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + udelay(25); /* allow reset propagation */ + + /* Spec never mentions clearing the bit. Marvell's driver does + * clear the bit, however. + */ + writelfl(0, port_mmio + EDMA_CMD_OFS); + + hpriv->ops->phy_errata(hpriv, mmio, port_no); + + if (IS_50XX(hpriv)) + mdelay(1); +} + +static void mv_stop_and_reset(struct ata_port *ap) +{ + struct mv_host_priv *hpriv = ap->host_set->private_data; + void __iomem *mmio = ap->host_set->mmio_base; + + mv_stop_dma(ap); + + mv_channel_reset(hpriv, mmio, ap->port_no); + + __mv_phy_reset(ap, 0); +} + +static inline void __msleep(unsigned int msec, int can_sleep) +{ + if (can_sleep) + msleep(msec); + else + mdelay(msec); +} + +/** + * __mv_phy_reset - Perform eDMA reset followed by COMRESET * @ap: ATA channel to manipulate * * Part of this is taken from __sata_phy_reset and modified to @@ -1213,41 +1732,47 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, * Inherited from caller. This is coded to safe to call at * interrupt level, i.e. it does not sleep. */ -static void mv_phy_reset(struct ata_port *ap) +static void __mv_phy_reset(struct ata_port *ap, int can_sleep) { + struct mv_port_priv *pp = ap->private_data; + struct mv_host_priv *hpriv = ap->host_set->private_data; void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; unsigned long timeout; + int retry = 5; + u32 sstatus; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - mv_stop_dma(ap); - - writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); - udelay(25); /* allow reset propagation */ - - /* Spec never mentions clearing the bit. Marvell's driver does - * clear the bit, however. - */ - writelfl(0, port_mmio + EDMA_CMD_OFS); - - VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - /* proceed to init communications via the scr_control reg */ + /* Issue COMRESET via SControl */ +comreset_retry: scr_write_flush(ap, SCR_CONTROL, 0x301); - mdelay(1); + __msleep(1, can_sleep); + scr_write_flush(ap, SCR_CONTROL, 0x300); - timeout = jiffies + (HZ * 1); + __msleep(20, can_sleep); + + timeout = jiffies + msecs_to_jiffies(200); do { - mdelay(10); - if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + sstatus = scr_read(ap, SCR_STATUS) & 0x3; + if ((sstatus == 3) || (sstatus == 0)) break; + + __msleep(1, can_sleep); } while (time_before(jiffies, timeout)); - VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + /* work around errata */ + if (IS_60XX(hpriv) && + (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) && + (retry-- > 0)) + goto comreset_retry; + + DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); @@ -1261,6 +1786,21 @@ static void mv_phy_reset(struct ata_port *ap) } ap->cbl = ATA_CBL_SATA; + /* even after SStatus reflects that device is ready, + * it seems to take a while for link to be fully + * established (and thus Status no longer 0x80/0x7F), + * so we poll a bit for that, here. + */ + retry = 20; + while (1) { + u8 drv_stat = ata_check_status(ap); + if ((drv_stat != 0x80) && (drv_stat != 0x7f)) + break; + __msleep(500, can_sleep); + if (retry-- <= 0) + break; + } + tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); tf.lbal = readb((void __iomem *) ap->ioaddr.lbal_addr); @@ -1271,9 +1811,19 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("Port disabled post-sig: No device present.\n"); ata_port_disable(ap); } + + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + VPRINTK("EXIT\n"); } +static void mv_phy_reset(struct ata_port *ap) +{ + __mv_phy_reset(ap, 1); +} + /** * mv_eng_timeout - Routine called by libata when SCSI times out I/O * @ap: ATA channel to manipulate @@ -1291,16 +1841,16 @@ static void mv_eng_timeout(struct ata_port *ap) printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); DPRINTK("All regs @ start of eng_timeout\n"); - mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, to_pci_dev(ap->host_set->dev)); qc = ata_qc_from_tag(ap, ap->active_tag); printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", - ap->host_set->mmio_base, ap, qc, qc->scsicmd, + ap->host_set->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd); mv_err_intr(ap); - mv_phy_reset(ap); + mv_stop_and_reset(ap); if (!qc) { printk(KERN_ERR "ata%u: BUG: timeout without command\n", @@ -1336,17 +1886,17 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; unsigned serr_ofs; - /* PIO related setup + /* PIO related setup */ port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); - port->error_addr = + port->error_addr = port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); - port->status_addr = + port->status_addr = port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); /* special case: control/altstatus doesn't have ATA_REG_ address */ port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; @@ -1362,14 +1912,92 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) /* unmask all EDMA error interrupts */ writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); - VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", + VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", readl(port_mmio + EDMA_CFG_OFS), readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +static int mv_chip_id(struct pci_dev *pdev, struct mv_host_priv *hpriv, + unsigned int board_idx) +{ + u8 rev_id; + u32 hp_flags = hpriv->hp_flags; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + switch(board_idx) { + case chip_5080: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_50XX; + + switch (rev_id) { + case 0x1: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying 50XXB2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_504x: + case chip_508x: + hpriv->ops = &mv5xxx_ops; + hp_flags |= MV_HP_50XX; + + switch (rev_id) { + case 0x0: + hp_flags |= MV_HP_ERRATA_50XXB0; + break; + case 0x3: + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_50XXB2; + break; + } + break; + + case chip_604x: + case chip_608x: + hpriv->ops = &mv6xxx_ops; + + switch (rev_id) { + case 0x7: + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + case 0x9: + hp_flags |= MV_HP_ERRATA_60X1C0; + break; + default: + dev_printk(KERN_WARNING, &pdev->dev, + "Applying B2 workarounds to unknown rev\n"); + hp_flags |= MV_HP_ERRATA_60X1B2; + break; + } + break; + + default: + printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx); + return 1; + } + + hpriv->hp_flags = hp_flags; + + return 0; +} + /** - * mv_host_init - Perform some early initialization of the host. + * mv_init_host - Perform some early initialization of the host. + * @pdev: host PCI device * @probe_ent: early data struct representing the host * * If possible, do an early global reset of the host. Then do @@ -1378,23 +2006,48 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) * LOCKING: * Inherited from caller. */ -static int mv_host_init(struct ata_probe_ent *probe_ent) +static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent, + unsigned int board_idx) { int rc = 0, n_hc, port, hc; void __iomem *mmio = probe_ent->mmio_base; - void __iomem *port_mmio; + struct mv_host_priv *hpriv = probe_ent->private_data; - if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && - mv_global_soft_reset(probe_ent->mmio_base)) { - rc = 1; + /* global interrupt mask */ + writel(0, mmio + HC_MAIN_IRQ_MASK_OFS); + + rc = mv_chip_id(pdev, hpriv, board_idx); + if (rc) goto done; - } n_hc = mv_get_hc_count(probe_ent->host_flags); probe_ent->n_ports = MV_PORTS_PER_HC * n_hc; + for (port = 0; port < probe_ent->n_ports; port++) + hpriv->ops->read_preamp(hpriv, port, mmio); + + rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); + if (rc) + goto done; + + hpriv->ops->reset_flash(hpriv, mmio); + hpriv->ops->reset_bus(pdev, mmio); + hpriv->ops->enable_leds(hpriv, mmio); + for (port = 0; port < probe_ent->n_ports; port++) { - port_mmio = mv_port_base(mmio, port); + if (IS_60XX(hpriv)) { + void __iomem *port_mmio = mv_port_base(mmio, port); + + u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL); + ifctl |= (1 << 12); + writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL); + } + + hpriv->ops->phy_errata(hpriv, mmio, port); + } + + for (port = 0; port < probe_ent->n_ports; port++) { + void __iomem *port_mmio = mv_port_base(mmio, port); mv_port_init(&probe_ent->port[port], port_mmio); } @@ -1418,11 +2071,12 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " - "PCI int cause/mask=0x%08x/0x%08x\n", + "PCI int cause/mask=0x%08x/0x%08x\n", readl(mmio + HC_MAIN_IRQ_CAUSE_OFS), readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); + done: return rc; } @@ -1458,7 +2112,7 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) dev_printk(KERN_INFO, &pdev->dev, "%u slots %u ports %s mode IRQ via %s\n", - (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } @@ -1528,7 +2182,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->private_data = hpriv; /* initialize adapter */ - rc = mv_host_init(probe_ent); + rc = mv_init_host(pdev, probe_ent, board_idx); if (rc) { goto err_out_hpriv; } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 242d906987ad..8a8e3e3ef0ed 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "1.02" +#define DRV_VERSION "1.03" enum { diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index 4a6d3067d23c..a8987f5ff5cc 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.04" +#define DRV_VERSION "0.05" enum { QS_PORTS = 4, diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 55e744d6db88..e0d6f194f54f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -5,17 +5,6 @@ * * Based on preview driver from Silicon Image. * - * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support - * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make - * those work. Enabling those shouldn't be difficult. Basic - * structure is all there (in libata-dev tree). If you have any - * information about this hardware, please contact me or linux-ide. - * Info is needed on... - * - * - How to issue tagged commands and turn on sactive on issue accordingly. - * - Where to put an ATAPI command and how to tell the device to send it. - * - How to enable/use 64bit. - * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any @@ -42,7 +31,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.23" /* * Port request block (PRB) 32 bytes @@ -139,6 +128,7 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */ PORT_CS_RESUME = (1 << 6), /* port resume */ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ @@ -188,11 +178,29 @@ enum { PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ + /* bits of PRB control field */ + PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */ + PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */ + PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */ + PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */ + PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* PRB protocol field */ + PRB_PROT_PACKET = (1 << 0), + PRB_PROT_TCQ = (1 << 1), + PRB_PROT_NCQ = (1 << 2), + PRB_PROT_READ = (1 << 3), + PRB_PROT_WRITE = (1 << 4), + PRB_PROT_TRANSPARENT = (1 << 5), + /* * Other constants */ SGE_TRM = (1 << 31), /* Last SGE in chain */ - PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + SGE_LNK = (1 << 30), /* linked list + Points to SGT, not SGE */ + SGE_DRD = (1 << 29), /* discard data read (/dev/null) + data address ignored */ /* board id */ BID_SIL3124 = 0, @@ -202,11 +210,22 @@ enum { IRQ_STAT_4PORTS = 0xf, }; -struct sil24_cmd_block { +struct sil24_ata_block { struct sil24_prb prb; struct sil24_sge sge[LIBATA_MAX_PRD]; }; +struct sil24_atapi_block { + struct sil24_prb prb; + u8 cdb[16]; + struct sil24_sge sge[LIBATA_MAX_PRD - 1]; +}; + +union sil24_cmd_block { + struct sil24_ata_block ata; + struct sil24_atapi_block atapi; +}; + /* * ap->private_data * @@ -214,7 +233,7 @@ struct sil24_cmd_block { * here from the previous interrupt. */ struct sil24_port_priv { - struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + union sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ struct ata_taskfile tf; /* Cached taskfile registers */ }; @@ -225,6 +244,7 @@ struct sil24_host_priv { void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */ }; +static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev); static u8 sil24_check_status(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); @@ -278,6 +298,8 @@ static struct scsi_host_template sil24_sht = { static const struct ata_port_operations sil24_ops = { .port_disable = ata_port_disable, + .dev_config = sil24_dev_config, + .check_status = sil24_check_status, .check_altstatus = sil24_check_status, .dev_select = ata_noop_dev_select, @@ -314,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -325,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -336,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = { { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_SRST | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -345,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + + if (ap->cdb_len == 16) + writel(PORT_CS_CDB16, port + PORT_CTRL_STAT); + else + writel(PORT_CS_CDB16, port + PORT_CTRL_CLR); +} + static inline void sil24_update_tf(struct ata_port *ap) { struct sil24_port_priv *pp = ap->private_data; @@ -396,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) *tf = pp->tf; } +static int sil24_issue_SRST(struct ata_port *ap) +{ + void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_prb *prb = &pp->cmd_block[0].ata.prb; + dma_addr_t paddr = pp->cmd_block_dma; + u32 irq_enable, irq_stat; + int cnt; + + /* temporarily turn off IRQs during SRST */ + irq_enable = readl(port + PORT_IRQ_ENABLE_SET); + writel(irq_enable, port + PORT_IRQ_ENABLE_CLR); + + /* + * XXX: Not sure whether the following sleep is needed or not. + * The original driver had it. So.... + */ + msleep(10); + + prb->ctrl = PRB_CTRL_SRST; + prb->fis[1] = 0; /* no PM yet */ + + writel((u32)paddr, port + PORT_CMD_ACTIVATE); + + for (cnt = 0; cnt < 100; cnt++) { + irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + + irq_stat >>= PORT_IRQ_RAW_SHIFT; + if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR)) + break; + + msleep(1); + } + + /* restore IRQs */ + writel(irq_enable, port + PORT_IRQ_ENABLE_SET); + + if (!(irq_stat & PORT_IRQ_COMPLETE)) + return -1; + + /* update TF */ + sil24_update_tf(ap); + return 0; +} + static void sil24_phy_reset(struct ata_port *ap) { + struct sil24_port_priv *pp = ap->private_data; + __sata_phy_reset(ap); - /* - * No ATAPI yet. Just unconditionally indicate ATA device. - * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA - * and libata core will ignore the device. - */ - if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) - ap->device[0].class = ATA_DEV_ATA; + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + if (sil24_issue_SRST(ap) < 0) { + printk(KERN_ERR DRV_NAME + " ata%u: SRST failed, disabling port\n", ap->id); + ap->ops->port_disable(ap); + return; + } + + ap->device->class = ata_dev_classify(&pp->tf); } static inline void sil24_fill_sg(struct ata_queued_cmd *qc, - struct sil24_cmd_block *cb) + struct sil24_sge *sge) { - struct sil24_sge *sge = cb->sge; struct scatterlist *sg; unsigned int idx = 0; @@ -432,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct sil24_port_priv *pp = ap->private_data; - struct sil24_cmd_block *cb = pp->cmd_block + qc->tag; - struct sil24_prb *prb = &cb->prb; + union sil24_cmd_block *cb = pp->cmd_block + qc->tag; + struct sil24_prb *prb; + struct sil24_sge *sge; switch (qc->tf.protocol) { case ATA_PROT_PIO: case ATA_PROT_DMA: case ATA_PROT_NODATA: + prb = &cb->ata.prb; + sge = cb->ata.sge; + prb->ctrl = 0; break; + + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_DMA: + case ATA_PROT_ATAPI_NODATA: + prb = &cb->atapi.prb; + sge = cb->atapi.sge; + memset(cb->atapi.cdb, 0, 32); + memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len); + + if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) { + if (qc->tf.flags & ATA_TFLAG_WRITE) + prb->ctrl = PRB_CTRL_PACKET_WRITE; + else + prb->ctrl = PRB_CTRL_PACKET_READ; + } else + prb->ctrl = 0; + + break; + default: - /* ATAPI isn't supported yet */ + prb = NULL; /* shut up, gcc */ + sge = NULL; BUG(); } ata_tf_to_fis(&qc->tf, prb->fis, 0); if (qc->flags & ATA_QCFLAG_DMAMAP) - sil24_fill_sg(qc, cb); + sil24_fill_sg(qc, sge); } static int sil24_qc_issue(struct ata_queued_cmd *qc) @@ -467,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } +static int __sil24_restart_controller(void __iomem *port) +{ + u32 tmp; + int cnt; + + writel(PORT_CS_INIT, port + PORT_CTRL_STAT); + + /* Max ~10ms */ + for (cnt = 0; cnt < 10000; cnt++) { + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_RDY) + return 0; + udelay(1); + } + + return -1; +} + +static void sil24_restart_controller(struct ata_port *ap) +{ + if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr)) + printk(KERN_ERR DRV_NAME + " ata%u: failed to restart controller\n", ap->id); +} + static int __sil24_reset_controller(void __iomem *port) { int cnt; @@ -486,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port) if (tmp & PORT_CS_DEV_RST) return -1; - return 0; + + if (tmp & PORT_CS_RDY) + return 0; + + return __sil24_restart_controller(port); } static void sil24_reset_controller(struct ata_port *ap) @@ -548,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) if (serror) writel(serror, port + PORT_SERROR); - printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + /* + * Don't log ATAPI device errors. They're supposed to happen + * and any serious errors will be logged using sense data by + * the SCSI layer. + */ + if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB) + printk("ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { /* @@ -558,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) */ sil24_update_tf(ap); err_mask = ac_err_mask(pp->tf.command); + sil24_restart_controller(ap); } else { /* * Other errors. libata currently doesn't have any @@ -565,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) * ATA_ERR. */ err_mask = AC_ERR_OTHER; + sil24_reset_controller(ap); } if (qc) ata_qc_complete(qc, err_mask); - - sil24_reset_controller(ap); } static inline void sil24_host_intr(struct ata_port *ap) @@ -646,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; struct sil24_port_priv *pp; - struct sil24_cmd_block *cb; + union sil24_cmd_block *cb; size_t cb_size = sizeof(*cb); dma_addr_t cb_dma; int rc = -ENOMEM; diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 57e5a9d964c3..6e7f7c83a75a 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -54,7 +54,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "1.06" +#define DRV_VERSION "1.07" /* Taskfile registers offsets */ #define K2_SATA_TF_CMD_OFFSET 0x00 diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index b4bbe48acab0..dcc3ad9a9d6e 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -46,7 +46,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.7" +#define DRV_VERSION "0.8" enum { diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 77a6e4b9262d..fcfa486965b4 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -47,7 +47,7 @@ #include #define DRV_NAME "sata_vsc" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" /* Interrupt register offsets (from chip base address) */ #define VSC_SATA_INT_STAT_OFFSET 0x00 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ff36f0c9fdad..ad47c1b84c3f 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -507,7 +507,7 @@ config SERIAL_SUNSU_CONSOLE config SERIAL_MUX tristate "Serial MUX support" - depends on PARISC + depends on GSC select SERIAL_CORE default y ---help--- diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 938d185841c9..89d7bd3eaee3 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -49,7 +49,6 @@ #include #include -#include #include #include #include @@ -63,7 +62,8 @@ #define AMBA_ISR_PASS_LIMIT 256 -#define UART_DUMMY_RSR_RX 256 +#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) +#define UART_DUMMY_DR_RX (1 << 16) /* * We wrap our port structure around the generic uart_port. @@ -116,7 +116,7 @@ pl011_rx_chars(struct uart_amba_port *uap) #endif { struct tty_struct *tty = uap->port.info->tty; - unsigned int status, ch, flag, rsr, max_count = 256; + unsigned int status, ch, flag, max_count = 256; status = readw(uap->port.membase + UART01x_FR); while ((status & UART01x_FR_RXFE) == 0 && max_count--) { @@ -129,7 +129,7 @@ pl011_rx_chars(struct uart_amba_port *uap) */ } - ch = readw(uap->port.membase + UART01x_DR); + ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; @@ -137,34 +137,33 @@ pl011_rx_chars(struct uart_amba_port *uap) * Note that the error handling code is * out of the main execution path */ - rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - if (rsr & UART01x_RSR_BE) { - rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + if (unlikely(ch & UART_DR_ERROR)) { + if (ch & UART011_DR_BE) { + ch &= ~(UART011_DR_FE | UART011_DR_PE); uap->port.icount.brk++; if (uart_handle_break(&uap->port)) goto ignore_char; - } else if (rsr & UART01x_RSR_PE) + } else if (ch & UART011_DR_PE) uap->port.icount.parity++; - else if (rsr & UART01x_RSR_FE) + else if (ch & UART011_DR_FE) uap->port.icount.frame++; - if (rsr & UART01x_RSR_OE) + if (ch & UART011_DR_OE) uap->port.icount.overrun++; - rsr &= uap->port.read_status_mask; + ch &= uap->port.read_status_mask; - if (rsr & UART01x_RSR_BE) + if (ch & UART011_DR_BE) flag = TTY_BREAK; - else if (rsr & UART01x_RSR_PE) + else if (ch & UART011_DR_PE) flag = TTY_PARITY; - else if (rsr & UART01x_RSR_FE) + else if (ch & UART011_DR_FE) flag = TTY_FRAME; } if (uart_handle_sysrq_char(&uap->port, ch, regs)) goto ignore_char; - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag); ignore_char: status = readw(uap->port.membase + UART01x_FR); @@ -476,33 +475,33 @@ pl011_set_termios(struct uart_port *port, struct termios *termios, */ uart_update_timeout(port, termios->c_cflag, baud); - port->read_status_mask = UART01x_RSR_OE; + port->read_status_mask = UART011_DR_OE | 255; if (termios->c_iflag & INPCK) - port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= UART01x_RSR_BE; + port->read_status_mask |= UART011_DR_BE; /* * Characters to ignore */ port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART01x_RSR_BE; + port->ignore_status_mask |= UART011_DR_BE; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART01x_RSR_OE; + port->ignore_status_mask |= UART011_DR_OE; } /* * Ignore all characters if CREAD is not set. */ if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_RSR_RX; + port->ignore_status_mask |= UART_DUMMY_DR_RX; if (UART_ENABLE_MS(port, termios->c_cflag)) pl011_enable_ms(port); diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c index 660bae5ba179..7633132a10aa 100644 --- a/drivers/serial/mux.c +++ b/drivers/serial/mux.c @@ -65,8 +65,8 @@ static struct uart_driver mux_driver = { static struct timer_list mux_timer; -#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET) -#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET) +#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET) +#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET) #define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8 /** @@ -79,10 +79,7 @@ static struct timer_list mux_timer; */ static unsigned int mux_tx_empty(struct uart_port *port) { - unsigned int cnt = __raw_readl((unsigned long)port->membase - + IO_DCOUNT_REG_OFFSET); - - return cnt ? 0 : TIOCSER_TEMT; + return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT; } /** @@ -218,8 +215,7 @@ static void mux_read(struct uart_port *port) __u32 start_count = port->icount.rx; while(1) { - data = __raw_readl((unsigned long)port->membase - + IO_DATA_REG_OFFSET); + data = __raw_readl(port->membase + IO_DATA_REG_OFFSET); if (MUX_STATUS(data)) continue; @@ -481,6 +477,13 @@ static int __init mux_probe(struct parisc_device *dev) port->ops = &mux_pops; port->flags = UPF_BOOT_AUTOCONF; port->line = port_cnt; + + /* The port->timeout needs to match what is present in + * uart_wait_until_sent in serial_core.c. Otherwise + * the time spent in msleep_interruptable will be very + * long, causing the appearance of a console hang. + */ + port->timeout = HZ / 50; spin_lock_init(&port->lock); status = uart_add_one_port(&mux_driver, port); BUG_ON(status); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 0e3daf6d7b50..25a086458ab9 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -161,7 +161,6 @@ static void sa1100_stop_tx(struct uart_port *port) static void sa1100_start_tx(struct uart_port *port) { struct sa1100_port *sport = (struct sa1100_port *)port; - unsigned long flags; u32 utcr3; utcr3 = UART_GET_UTCR3(sport); diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c index c52af73a251b..6756d0fab6fe 100644 --- a/drivers/tc/zs.c +++ b/drivers/tc/zs.c @@ -6,7 +6,7 @@ * * DECstation changes * Copyright (C) 1998-2000 Harald Koerfgen - * Copyright (C) 2000, 2001, 2002, 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005 Maciej W. Rozycki * * For the rest of the code the original Copyright applies: * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) @@ -55,6 +55,7 @@ #include #include #include +#include #ifdef CONFIG_SERIAL_DEC_CONSOLE #include #endif @@ -63,7 +64,6 @@ #include #include #include -#include #include #include @@ -128,6 +128,8 @@ static struct zs_parms ds_parms = { #define BUS_PRESENT (DS_BUS_PRESENT) +DEFINE_SPINLOCK(zs_lock); + struct dec_zschannel zs_channels[NUM_CHANNELS]; struct dec_serial zs_soft[NUM_CHANNELS]; int zs_channels_found; @@ -159,8 +161,6 @@ static unsigned char zs_init_regs[16] __initdata = { 0 /* write 15 */ }; -DECLARE_TASK_QUEUE(tq_zs_serial); - static struct tty_driver *serial_driver; /* serial subtype definitions */ @@ -294,8 +294,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set) { unsigned long flags; - - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->zs_channel != info->zs_chan_a) { if (set) { info->zs_chan_a->curregs[5] |= (which & (RTS | DTR)); @@ -304,7 +303,7 @@ static inline void zs_rtsdtr(struct dec_serial *info, int which, int set) } write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* Utility routines for the Zilog */ @@ -345,12 +344,10 @@ static inline void rs_recv_clear(struct dec_zschannel *zsc) * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. */ -static _INLINE_ void rs_sched_event(struct dec_serial *info, - int event) +static _INLINE_ void rs_sched_event(struct dec_serial *info, int event) { info->event |= 1 << event; - queue_task(&info->tqueue, &tq_zs_serial); - mark_bh(SERIAL_BH); + tasklet_schedule(&info->tlet); } static _INLINE_ void receive_chars(struct dec_serial *info, @@ -497,9 +494,10 @@ static _INLINE_ void status_handle(struct dec_serial *info) /* * This is the serial driver's generic interrupt routine */ -void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) +static irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct dec_serial *info = (struct dec_serial *) dev_id; + irqreturn_t status = IRQ_NONE; unsigned char zs_intreg; int shift; @@ -521,6 +519,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) if ((zs_intreg & CHAN_IRQMASK) == 0) break; + status = IRQ_HANDLED; + if (zs_intreg & CHBRxIP) { receive_chars(info, regs); } @@ -534,6 +534,8 @@ void rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) /* Why do we need this ? */ write_zsreg(info->zs_channel, 0, RES_H_IUS); + + return status; } #ifdef ZS_DEBUG_REGS @@ -578,12 +580,12 @@ static void rs_stop(struct tty_struct *tty) return; #if 1 - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->zs_channel->curregs[5] & TxENAB) { info->zs_channel->curregs[5] &= ~TxENAB; write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); #endif } @@ -595,7 +597,7 @@ static void rs_start(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_start")) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); #if 1 if (info->xmit_cnt && info->xmit_buf && !(info->zs_channel->curregs[5] & TxENAB)) { info->zs_channel->curregs[5] |= TxENAB; @@ -606,7 +608,7 @@ static void rs_start(struct tty_struct *tty) transmit_chars(info); } #endif - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -618,12 +620,8 @@ static void rs_start(struct tty_struct *tty) * interrupt driver proper are done; the interrupt driver schedules * them using rs_sched_event(), and they get done here. */ -static void do_serial_bh(void) -{ - run_task_queue(&tq_zs_serial); -} -static void do_softint(void *private_) +static void do_softint(unsigned long private_) { struct dec_serial *info = (struct dec_serial *) private_; struct tty_struct *tty; @@ -634,10 +632,11 @@ static void do_softint(void *private_) if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); } } -int zs_startup(struct dec_serial * info) +static int zs_startup(struct dec_serial * info) { unsigned long flags; @@ -650,7 +649,7 @@ int zs_startup(struct dec_serial * info) return -ENOMEM; } - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); #ifdef SERIAL_DEBUG_OPEN printk("starting up ttyS%d (irq %d)...", info->line, info->irq); @@ -706,7 +705,7 @@ int zs_startup(struct dec_serial * info) info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; info->flags |= ZILOG_INITIALIZED; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return 0; } @@ -726,7 +725,7 @@ static void shutdown(struct dec_serial * info) info->irq); #endif - save_flags(flags); cli(); /* Disable interrupts */ + spin_lock_irqsave(&zs_lock, flags); if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); @@ -749,7 +748,7 @@ static void shutdown(struct dec_serial * info) set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~ZILOG_INITIALIZED; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -785,7 +784,7 @@ static void change_speed(struct dec_serial *info) i += 15; } - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); info->zs_baud = baud_table[i]; if (info->zs_baud) { brg = BPS_TO_BRG(info->zs_baud, zs_parms->clock/info->clk_divisor); @@ -858,7 +857,7 @@ static void change_speed(struct dec_serial *info) /* Load up the new values */ load_zsregs(info->zs_channel, info->zs_channel->curregs); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static void rs_flush_chars(struct tty_struct *tty) @@ -874,9 +873,9 @@ static void rs_flush_chars(struct tty_struct *tty) return; /* Enable transmitter */ - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static int rs_write(struct tty_struct * tty, @@ -892,26 +891,17 @@ static int rs_write(struct tty_struct * tty, if (!tty || !info->xmit_buf) return 0; - save_flags(flags); while (1) { - cli(); + spin_lock_irqsave(&zs_lock, flags); c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; - if (from_user) { - down(&tmp_buf_sem); - copy_from_user(tmp_buf, buf, c); - c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); - up(&tmp_buf_sem); - } else - memcpy(info->xmit_buf + info->xmit_head, buf, c); + memcpy(info->xmit_buf + info->xmit_head, buf, c); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); info->xmit_cnt += c; - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); buf += c; count -= c; total += c; @@ -920,7 +910,7 @@ static int rs_write(struct tty_struct * tty, if (info->xmit_cnt && !tty->stopped && !info->tx_stopped && !info->tx_active) transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return total; } @@ -952,9 +942,9 @@ static void rs_flush_buffer(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) return; - cli(); + spin_lock_irq(&zs_lock); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - sti(); + spin_unlock_irq(&zs_lock); tty_wakeup(tty); } @@ -982,11 +972,11 @@ static void rs_throttle(struct tty_struct * tty) return; if (I_IXOFF(tty)) { - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); info->x_char = STOP_CHAR(tty); if (!info->tx_active) transmit_chars(info); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } if (C_CRTSCTS(tty)) { @@ -1010,7 +1000,7 @@ static void rs_unthrottle(struct tty_struct * tty) return; if (I_IXOFF(tty)) { - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (info->x_char) info->x_char = 0; else { @@ -1018,7 +1008,7 @@ static void rs_unthrottle(struct tty_struct * tty) if (!info->tx_active) transmit_chars(info); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } if (C_CRTSCTS(tty)) { @@ -1111,9 +1101,9 @@ static int get_lsr_info(struct dec_serial * info, unsigned int *value) { unsigned char status; - cli(); + spin_lock(&zs_lock); status = read_zsreg(info->zs_channel, 0); - sti(); + spin_unlock_irq(&zs_lock); put_user(status,value); return 0; } @@ -1136,11 +1126,11 @@ static int rs_tiocmget(struct tty_struct *tty, struct file *file) if (info->zs_channel == info->zs_chan_a) result = 0; else { - cli(); + spin_lock(&zs_lock); control = info->zs_chan_a->curregs[5]; status_a = read_zsreg(info->zs_chan_a, 0); status_b = read_zsreg(info->zs_channel, 0); - sti(); + spin_unlock_irq(&zs_lock); result = ((control & RTS) ? TIOCM_RTS: 0) | ((control & DTR) ? TIOCM_DTR: 0) | ((status_b & DCD) ? TIOCM_CAR: 0) @@ -1155,8 +1145,6 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct dec_serial * info = (struct dec_serial *)tty->driver_data; - int error; - unsigned int arg, bits; if (info->hook) return -ENODEV; @@ -1170,8 +1158,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, if (info->zs_channel == info->zs_chan_a) return 0; - get_user(arg, value); - cli(); + spin_lock(&zs_lock); if (set & TIOCM_RTS) info->zs_chan_a->curregs[5] |= RTS; if (set & TIOCM_DTR) @@ -1181,7 +1168,7 @@ static int rs_tiocmset(struct tty_struct *tty, struct file *file, if (clear & TIOCM_DTR) info->zs_chan_a->curregs[5] &= ~DTR; write_zsreg(info->zs_chan_a, 5, info->zs_chan_a->curregs[5]); - sti(); + spin_unlock_irq(&zs_lock); return 0; } @@ -1198,19 +1185,18 @@ static void rs_break(struct tty_struct *tty, int break_state) if (!info->port) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (break_state == -1) info->zs_channel->curregs[5] |= SND_BRK; else info->zs_channel->curregs[5] &= ~SND_BRK; write_zsreg(info->zs_channel, 5, info->zs_channel->curregs[5]); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static int rs_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { - int error; struct dec_serial * info = (struct dec_serial *)tty->driver_data; if (info->hook) @@ -1287,10 +1273,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp) if (!info || serial_paranoia_check(info, tty->name, "rs_close")) return; - save_flags(flags); cli(); + spin_lock_irqsave(&zs_lock, flags); if (tty_hung_up_p(filp)) { - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return; } @@ -1315,7 +1301,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->count = 0; } if (info->count) { - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return; } info->flags |= ZILOG_CLOSING; @@ -1358,7 +1344,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) } info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING); wake_up_interruptible(&info->close_wait); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } /* @@ -1398,7 +1384,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) /* * rs_hangup() --- called by tty_hangup() when a hangup is signaled. */ -void rs_hangup(struct tty_struct *tty) +static void rs_hangup(struct tty_struct *tty) { struct dec_serial * info = (struct dec_serial *)tty->driver_data; @@ -1466,16 +1452,16 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready before block: ttyS%d, count = %d\n", info->line, info->count); #endif - cli(); + spin_lock(&zs_lock); if (!tty_hung_up_p(filp)) info->count--; - sti(); + spin_unlock_irq(&zs_lock); info->blocked_open++; while (1) { - cli(); + spin_lock(&zs_lock); if (tty->termios->c_cflag & CBAUD) zs_rtsdtr(info, RTS | DTR, 1); - sti(); + spin_unlock_irq(&zs_lock); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || !(info->flags & ZILOG_INITIALIZED)) { @@ -1523,7 +1509,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, * the IRQ chain. It also performs the serial-specific * initialization for the tty structure. */ -int rs_open(struct tty_struct *tty, struct file * filp) +static int rs_open(struct tty_struct *tty, struct file * filp) { struct dec_serial *info; int retval, line; @@ -1706,7 +1692,7 @@ static void __init probe_sccs(void) } } - save_and_cli(flags); + spin_lock_irqsave(&zs_lock, flags); for (n = 0; n < zs_channels_found; n++) { if (n % 2 == 0) { write_zsreg(zs_soft[n].zs_chan_a, R9, FHWRES); @@ -1716,7 +1702,7 @@ static void __init probe_sccs(void) load_zsregs(zs_soft[n].zs_channel, zs_soft[n].zs_channel->curregs); } - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); } static struct tty_operations serial_ops = { @@ -1749,9 +1735,6 @@ int __init zs_init(void) if(!BUS_PRESENT) return -ENODEV; - /* Setup base handler, and timer table. */ - init_bh(SERIAL_BH, do_serial_bh); - /* Find out how many Z8530 SCCs we have */ if (zs_chain == 0) probe_sccs(); @@ -1800,8 +1783,7 @@ int __init zs_init(void) info->event = 0; info->count = 0; info->blocked_open = 0; - info->tqueue.routine = do_softint; - info->tqueue.data = info; + tasklet_init(&info->tlet, do_softint, (unsigned long)info); init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); printk("ttyS%02d at 0x%08x (irq = %d) is a Z85C30 SCC\n", @@ -1833,8 +1815,7 @@ int __init zs_init(void) /* * polling I/O routines */ -static int -zs_poll_tx_char(void *handle, unsigned char ch) +static int zs_poll_tx_char(void *handle, unsigned char ch) { struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; @@ -1857,8 +1838,7 @@ zs_poll_tx_char(void *handle, unsigned char ch) return -ENODEV; } -static int -zs_poll_rx_char(void *handle) +static int zs_poll_rx_char(void *handle) { struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; @@ -2037,7 +2017,7 @@ static int __init serial_console_setup(struct console *co, char *options) } co->cflag = cflag; - save_and_cli(flags); + spin_lock_irqsave(&zs_lock, flags); /* * Set up the baud rate generator. @@ -2092,7 +2072,7 @@ static int __init serial_console_setup(struct console *co, char *options) zs_soft[co->index].clk_divisor = clk_divisor; zs_soft[co->index].zs_baud = get_zsbaud(&zs_soft[co->index]); - restore_flags(flags); + spin_unlock_irqrestore(&zs_lock, flags); return 0; } @@ -2229,5 +2209,3 @@ void __init zs_kgdb_hook(int tty_num) set_debug_traps(); /* init stub */ } #endif /* ifdef CONFIG_KGDB */ - - diff --git a/drivers/tc/zs.h b/drivers/tc/zs.h index c52edffa6049..13512200ceba 100644 --- a/drivers/tc/zs.h +++ b/drivers/tc/zs.h @@ -6,14 +6,14 @@ * * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004, 2005 Maciej W. Rozycki */ #ifndef _DECSERIAL_H #define _DECSERIAL_H #include -#define NUM_ZSREGS 16 +#define NUM_ZSREGS 16 struct serial_struct { int type; @@ -139,8 +139,7 @@ struct dec_serial { int xmit_head; int xmit_tail; int xmit_cnt; - struct tq_struct tqueue; - struct tq_struct tqueue_hangup; + struct tasklet_struct tlet; wait_queue_head_t open_wait; wait_queue_head_t close_wait; }; @@ -282,7 +281,7 @@ struct dec_serial { #define DLC 4 /* Disable Lower Chain */ #define MIE 8 /* Master Interrupt Enable */ #define STATHI 0x10 /* Status high */ -#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ +#define SOFTACK 0x20 /* Software Interrupt Acknowledge */ #define NORESET 0 /* No reset on write to R9 */ #define CHRB 0x40 /* Reset channel B */ #define CHRA 0x80 /* Reset channel A */ @@ -395,8 +394,8 @@ struct dec_serial { /* Read Register 15 (value of WR 15) */ /* Misc macros */ -#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES)) -#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \ +#define ZS_CLEARERR(channel) (write_zsreg(channel, 0, ERR_RES)) +#define ZS_CLEARFIFO(channel) do { volatile unsigned char garbage; \ garbage = read_zsdata(channel); \ garbage = read_zsdata(channel); \ garbage = read_zsdata(channel); \ diff --git a/drivers/usb/atm/Makefile b/drivers/usb/atm/Makefile index 751f297be2ef..85099718c683 100644 --- a/drivers/usb/atm/Makefile +++ b/drivers/usb/atm/Makefile @@ -6,3 +6,7 @@ obj-$(CONFIG_USB_CXACRU) += cxacru.o obj-$(CONFIG_USB_SPEEDTOUCH) += speedtch.o obj-$(CONFIG_USB_ATM) += usbatm.o obj-$(CONFIG_USB_XUSBATM) += xusbatm.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index 936646457935..1adacd60d713 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -27,14 +27,9 @@ #include /* -#define DEBUG #define VERBOSE_DEBUG */ -#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG) -# define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index dd1c4d2a0c31..86d5c380892d 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -14,3 +14,7 @@ ifeq ($(CONFIG_USB_DEVICEFS),y) endif obj-$(CONFIG_USB) += usbcore.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 57e800ac3cee..419c9943a7cb 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -15,14 +15,6 @@ #include #include #include - - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include "hcd.h" diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 993019500cc3..a9d89c78cc20 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -1,9 +1,4 @@ #include - -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 942cd437dc48..b1d6e9af732d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1392,13 +1392,13 @@ static int proc_ioctl_default(struct dev_state *ps, void __user *arg) } #ifdef CONFIG_COMPAT -static int proc_ioctl_compat(struct dev_state *ps, void __user *arg) +static int proc_ioctl_compat(struct dev_state *ps, compat_uptr_t arg) { struct usbdevfs_ioctl32 __user *uioc; struct usbdevfs_ioctl ctrl; u32 udata; - uioc = compat_ptr(arg); + uioc = compat_ptr((long)arg); if (get_user(ctrl.ifno, &uioc->ifno) || get_user(ctrl.ioctl_code, &uioc->ioctl_code) || __get_user(udata, &uioc->data)) @@ -1511,7 +1511,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd case USBDEVFS_IOCTL32: snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__); - ret = proc_ioctl_compat(ps, p); + ret = proc_ioctl_compat(ps, (compat_uptr_t)(long)p); break; #endif diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index e695308095ae..37b13368c814 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -19,12 +19,6 @@ #include #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include "usb.h" diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 84d9e69329bb..7feb829362d6 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -17,13 +17,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6c7ca5b08cd6..5e5f65a475ab 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -23,11 +23,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG -#define DEBUG -#endif - #include #include #include diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 256d9f698715..840727948d84 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -9,11 +9,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include #include diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 12f490fdee8f..c44bbedec817 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -46,7 +46,6 @@ static struct super_operations usbfs_ops; static struct file_operations default_file_operations; -static struct inode_operations usbfs_dir_inode_operations; static struct vfsmount *usbfs_mount; static int usbfs_mount_count; /* = 0 */ static int ignore_mount = 0; @@ -262,7 +261,7 @@ static struct inode *usbfs_get_inode (struct super_block *sb, int mode, dev_t de inode->i_fop = &default_file_operations; break; case S_IFDIR: - inode->i_op = &usbfs_dir_inode_operations; + inode->i_op = &simple_dir_inode_operations; inode->i_fop = &simple_dir_operations; /* directory inodes start off with i_nlink == 2 (for "." entry) */ @@ -417,10 +416,6 @@ static struct file_operations default_file_operations = { .llseek = default_file_lseek, }; -static struct inode_operations usbfs_dir_inode_operations = { - .lookup = simple_lookup, -}; - static struct super_operations usbfs_ops = { .statfs = simple_statfs, .drop_inode = generic_delete_inode, diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 644a3d4f12aa..fe74f99ca5f4 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -3,13 +3,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include /* for scatterlist macros */ #include #include @@ -1457,12 +1450,11 @@ free_interfaces: */ for (i = 0; i < nintf; ++i) { struct usb_interface *intf = cp->interface[i]; - struct usb_host_interface *alt = intf->cur_altsetting; dev_dbg (&dev->dev, "adding %s (config #%d, interface %d)\n", intf->dev.bus_id, configuration, - alt->desc.bInterfaceNumber); + intf->cur_altsetting->desc.bInterfaceNumber); ret = device_add (&intf->dev); if (ret != 0) { dev_err(&dev->dev, diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c index 37da059eced7..fbbebab52fbd 100644 --- a/drivers/usb/core/notify.c +++ b/drivers/usb/core/notify.c @@ -12,13 +12,7 @@ #include #include #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include - #include "usb.h" diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index edd83e014452..71d881327e88 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -12,14 +12,7 @@ #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include - #include "usb.h" /* endpoint stuff */ diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index f2a1fed2a802..081796726b95 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -4,12 +4,6 @@ #include #include #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif #include #include "hcd.h" diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 0eefff7bcb3c..e197ce9353de 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -22,13 +22,6 @@ */ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 1e407745c115..c655d46c8aed 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -944,7 +944,7 @@ static int dummy_udc_suspend (struct platform_device *dev, pm_message_t state) set_link_state (dum); spin_unlock_irq (&dum->lock); - dev->power.power_state = state; + dev->dev.power.power_state = state; usb_hcd_poll_rh_status (dummy_to_hcd (dum)); return 0; } @@ -1904,7 +1904,7 @@ static int dummy_hcd_probe (struct platform_device *dev) struct usb_hcd *hcd; int retval; - dev_info (dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); + dev_info(&dev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc); hcd = usb_create_hcd (&dummy_hcd, &dev->dev, dev->dev.bus_id); if (!hcd) diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 081ec3f5cff4..3959ccc88332 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -219,7 +219,7 @@ static int ohci_hcd_lh7a404_drv_probe(struct platform_device *pdev) static int ohci_hcd_lh7a404_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_lh7a404_remove(hcd, pdev); return 0; diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 18755766e406..2ec6a78bd65e 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -185,7 +185,7 @@ static int ohci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev) { - struct usb_hcd *hcd = platform_get_drvdata(dev); + struct usb_hcd *hcd = platform_get_drvdata(pdev); usb_hcd_ppc_soc_remove(hcd, pdev); return 0; diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 61a2604cce4f..950543aa5ac7 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -327,6 +327,18 @@ static inline void mts_urb_abort(struct mts_desc* desc) { usb_kill_urb( desc->urb ); } +static int mts_slave_alloc (struct scsi_device *s) +{ + s->inquiry_len = 0x24; + return 0; +} + +static int mts_slave_configure (struct scsi_device *s) +{ + blk_queue_dma_alignment(s->request_queue, (512 - 1)); + return 0; +} + static int mts_scsi_abort (Scsi_Cmnd *srb) { struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); @@ -411,7 +423,7 @@ static void mts_transfer_done( struct urb *transfer, struct pt_regs *regs ) MTS_INT_INIT(); context->srb->result &= MTS_SCSI_ERR_MASK; - context->srb->result |= (unsigned)context->status<<1; + context->srb->result |= (unsigned)(*context->scsi_status)<<1; mts_transfer_cleanup(transfer); @@ -427,7 +439,7 @@ static void mts_get_status( struct urb *transfer ) mts_int_submit_urb(transfer, usb_rcvbulkpipe(context->instance->usb_dev, context->instance->ep_response), - &context->status, + context->scsi_status, 1, mts_transfer_done ); } @@ -481,7 +493,7 @@ static void mts_command_done( struct urb *transfer, struct pt_regs *regs ) context->data_pipe, context->data, context->data_length, - context->srb->use_sg ? mts_do_sg : mts_data_done); + context->srb->use_sg > 1 ? mts_do_sg : mts_data_done); } else { mts_get_status(transfer); } @@ -627,7 +639,6 @@ int mts_scsi_queuecommand( Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback ) callback(srb); } - out: return err; } @@ -645,6 +656,9 @@ static struct scsi_host_template mts_scsi_host_template = { .cmd_per_lun = 1, .use_clustering = 1, .emulated = 1, + .slave_alloc = mts_slave_alloc, + .slave_configure = mts_slave_configure, + .max_sectors= 256, /* 128 K */ }; struct vendor_product @@ -771,8 +785,8 @@ static int mts_usb_probe(struct usb_interface *intf, MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); return -ENODEV; } - - + + new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); if (!new_desc) goto out; @@ -781,6 +795,10 @@ static int mts_usb_probe(struct usb_interface *intf, if (!new_desc->urb) goto out_kfree; + new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); + if (!new_desc->context.scsi_status) + goto out_kfree2; + new_desc->usb_dev = dev; new_desc->usb_intf = intf; init_MUTEX(&new_desc->lock); @@ -817,6 +835,8 @@ static int mts_usb_probe(struct usb_interface *intf, usb_set_intfdata(intf, new_desc); return 0; + out_kfree2: + kfree(new_desc->context.scsi_status); out_free_urb: usb_free_urb(new_desc->urb); out_kfree: @@ -836,6 +856,7 @@ static void mts_usb_disconnect (struct usb_interface *intf) scsi_host_put(desc->host); usb_free_urb(desc->urb); + kfree(desc->context.scsi_status); kfree(desc); } @@ -856,5 +877,3 @@ module_exit(microtek_drv_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); - - diff --git a/drivers/usb/image/microtek.h b/drivers/usb/image/microtek.h index 3271deb8c001..926d4bdc6746 100644 --- a/drivers/usb/image/microtek.h +++ b/drivers/usb/image/microtek.h @@ -22,7 +22,7 @@ struct mts_transfer_context int data_pipe; int fragment; - u8 status; /* status returned from ep_response after command completion */ + u8 *scsi_status; /* status returned from ep_response after command completion */ }; diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 5e03b93f29f6..07cb17db42fc 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -42,3 +42,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 79ddce4555ab..45f3130fadea 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1318,6 +1318,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_PTU 0x0003 #define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 #define USB_DEVICE_ID_WACOM_CINTIQ 0x003F +#define USB_DEVICE_ID_WACOM_DTF 0x00C0 #define USB_VENDOR_ID_ACECAD 0x0460 #define USB_DEVICE_ID_ACECAD_FLAIR 0x0004 @@ -1524,6 +1525,9 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE }, @@ -1531,11 +1535,19 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c index 3b581853cf10..4a50acb39d29 100644 --- a/drivers/usb/input/itmtouch.c +++ b/drivers/usb/input/itmtouch.c @@ -40,13 +40,6 @@ *****************************************************************************/ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c index 5b8d65f62abf..a32cfe51b77d 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/usb/input/keyspan_remote.c @@ -160,7 +160,8 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) * though so it's not too big a deal */ if (dev->data.pos >= dev->data.len) { - dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", + dev_dbg(&dev->udev->dev, + "%s - Error ran out of data. pos: %d, len: %d\n", __FUNCTION__, dev->data.pos, dev->data.len); return -1; } @@ -306,7 +307,7 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) err("Bad message recieved, no stop bit found.\n"); } - dev_dbg(&remote->udev, + dev_dbg(&remote->udev->dev, "%s found valid message: system: %d, button: %d, toggle: %d\n", __FUNCTION__, message.system, message.button, message.toggle); diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c index 7fce526560ca..52cc18cd247d 100644 --- a/drivers/usb/input/mtouchusb.c +++ b/drivers/usb/input/mtouchusb.c @@ -40,13 +40,6 @@ *****************************************************************************/ #include - -#ifdef CONFIG_USB_DEBUG - #define DEBUG -#else - #undef DEBUG -#endif - #include #include #include diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c index dca5ee93a4ef..19e015d171aa 100644 --- a/drivers/usb/input/pid.c +++ b/drivers/usb/input/pid.c @@ -37,8 +37,6 @@ #include "hid.h" #include "pid.h" -#define DEBUG - #define CHECK_OWNERSHIP(i, hid_pid) \ ((i) < FF_EFFECTS_MAX && i >= 0 && \ test_bit(FF_PID_FLAGS_USED, &hid_pid->effects[(i)].flags) && \ diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c index 0043e6ebcd1f..7420c6b84284 100644 --- a/drivers/usb/input/touchkitusb.c +++ b/drivers/usb/input/touchkitusb.c @@ -30,10 +30,6 @@ #include #include #include - -#if !defined(DEBUG) && defined(CONFIG_USB_DEBUG) -#define DEBUG -#endif #include #include diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c index ea0f75773ae1..aea1cfae34cc 100644 --- a/drivers/usb/input/wacom.c +++ b/drivers/usb/input/wacom.c @@ -52,8 +52,10 @@ * v1.30.1 (pi) - Added Graphire3 support * v1.40 (pc) - Add support for several new devices, fix eraser reporting, ... * v1.43 (pc) - Added support for Cintiq 21UX - - Fixed a Graphire bug - - Merged wacom_intuos3_irq into wacom_intuos_irq + * - Fixed a Graphire bug + * - Merged wacom_intuos3_irq into wacom_intuos_irq + * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc. + * - Report Device IDs */ /* @@ -76,7 +78,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.43" +#define DRIVER_VERSION "v1.44" #define DRIVER_AUTHOR "Vojtech Pavlik " #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -86,10 +88,14 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE(DRIVER_LICENSE); #define USB_VENDOR_ID_WACOM 0x056a +#define STYLUS_DEVICE_ID 0x02 +#define CURSOR_DEVICE_ID 0x06 +#define ERASER_DEVICE_ID 0x0A enum { PENPARTNER = 0, GRAPHIRE, + G4, PL, INTUOS, INTUOS3, @@ -116,6 +122,7 @@ struct wacom { struct urb *irq; struct wacom_features *features; int tool[2]; + int id[2]; __u32 serial[2]; char phys[32]; }; @@ -136,7 +143,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int prox, pressure; + int prox, pressure, id; int retval; switch (urb->status) { @@ -163,6 +170,7 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); + id = ERASER_DEVICE_ID; if (prox) { pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); @@ -177,11 +185,15 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) * an out of proximity for previous tool then a in for new tool. */ if (!wacom->tool[0]) { - /* Going into proximity select tool */ - wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + /* Eraser bit set for DTF */ + if (data[1] & 0x10) + wacom->tool[1] = BTN_TOOL_RUBBER; + else + /* Going into proximity select tool */ + wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; } else { /* was entered with stylus2 pressed */ - if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) { + if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { /* report out proximity for previous tool */ input_report_key(dev, wacom->tool[1], 0); input_sync(dev); @@ -192,8 +204,9 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs) if (wacom->tool[1] != BTN_TOOL_RUBBER) { /* Unknown tool selected default to pen tool */ wacom->tool[1] = BTN_TOOL_PEN; + id = STYLUS_DEVICE_ID; } - input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */ + input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */ input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); input_report_abs(dev, ABS_PRESSURE, pressure); @@ -250,10 +263,10 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); if (data[1] & 0x04) { - input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x08); } else { - input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20); + input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); } input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2])); @@ -299,7 +312,7 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs) } input_regs(dev, regs); - input_report_key(dev, BTN_TOOL_PEN, 1); + input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID); input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1])); input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3])); input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127); @@ -319,7 +332,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) struct wacom *wacom = urb->context; unsigned char *data = wacom->data; struct input_dev *dev = wacom->dev; - int x, y; + int x, y, id, rw; int retval; switch (urb->status) { @@ -344,6 +357,7 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) input_regs(dev, regs); + id = STYLUS_DEVICE_ID; if (data[1] & 0x10) { /* in prox */ switch ((data[1] >> 5) & 3) { @@ -354,18 +368,27 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) case 1: /* Rubber */ wacom->tool[0] = BTN_TOOL_RUBBER; + id = ERASER_DEVICE_ID; break; case 2: /* Mouse with wheel */ input_report_key(dev, BTN_MIDDLE, data[1] & 0x04); - input_report_rel(dev, REL_WHEEL, (signed char) data[6]); + if (wacom->features->type == G4) { + rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03); + input_report_rel(dev, REL_WHEEL, rw); + } else + input_report_rel(dev, REL_WHEEL, (signed char) data[6]); /* fall through */ case 3: /* Mouse without wheel */ wacom->tool[0] = BTN_TOOL_MOUSE; + id = CURSOR_DEVICE_ID; input_report_key(dev, BTN_LEFT, data[1] & 0x01); input_report_key(dev, BTN_RIGHT, data[1] & 0x02); - input_report_abs(dev, ABS_DISTANCE, data[7]); + if (wacom->features->type == G4) + input_report_abs(dev, ABS_DISTANCE, data[6]); + else + input_report_abs(dev, ABS_DISTANCE, data[7]); break; } } @@ -376,16 +399,50 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs) input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6])); + input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); input_report_key(dev, BTN_TOUCH, data[1] & 0x01); input_report_key(dev, BTN_STYLUS, data[1] & 0x02); input_report_key(dev, BTN_STYLUS2, data[1] & 0x04); } } - input_report_key(dev, wacom->tool[0], data[1] & 0x10); + input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0); input_sync(dev); + /* send pad data */ + if (wacom->features->type == G4) { + /* fist time sending pad data */ + if (wacom->tool[1] != BTN_TOOL_FINGER) { + wacom->id[1] = 0; + wacom->serial[1] = (data[7] & 0x38) >> 2; + } + if (data[7] & 0xf8) { + input_report_key(dev, BTN_0, (data[7] & 0x40)); + input_report_key(dev, BTN_4, (data[7] & 0x80)); + if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e)) + /* alter REL_WHEEL value so X apps can get it */ + wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1; + else + wacom->serial[1] = (data[7] & 0x38 ) >> 2; + + /* don't alter the value when there is no wheel event */ + if (wacom->serial[1] == 1) + wacom->serial[1] = 0; + rw = wacom->serial[1]; + rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07); + input_report_rel(dev, REL_WHEEL, rw); + wacom->tool[1] = BTN_TOOL_FINGER; + wacom->id[1] = data[7] & 0xf8; + input_report_key(dev, wacom->tool[1], 0xf0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom->id[1] = 0; + wacom->serial[1] = 0; + input_report_key(dev, wacom->tool[1], 0); + input_event(dev, EV_MSC, MSC_SERIAL, 0xf0); + } + input_sync(dev); + } exit: retval = usb_submit_urb (urb, GFP_ATOMIC); if (retval) @@ -410,7 +467,8 @@ static int wacom_intuos_inout(struct urb *urb) (data[4] << 20) + (data[5] << 12) + (data[6] << 4) + (data[7] >> 4); - switch ((data[2] << 4) | (data[3] >> 4)) { + wacom->id[idx] = (data[2] << 4) | (data[3] >> 4); + switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ case 0x012: @@ -458,7 +516,7 @@ static int wacom_intuos_inout(struct urb *urb) default: /* Unknown tool */ wacom->tool[idx] = BTN_TOOL_PEN; } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); return 1; @@ -637,7 +695,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs) } } - input_report_key(dev, wacom->tool[idx], 1); + input_report_key(dev, wacom->tool[idx], wacom->id[idx]); input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]); input_sync(dev); @@ -655,6 +713,13 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq }, + { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, @@ -666,16 +731,20 @@ static struct wacom_features wacom_features[] = { { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq }, { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq }, { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq }, + { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq }, + { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq }, + { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, { "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq }, - { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq }, - { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq }, { "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq }, + { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq }, { } @@ -688,6 +757,13 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, @@ -699,16 +775,20 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, - { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } @@ -779,6 +859,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0); switch (wacom->features->type) { + case G4: + input_dev->evbit[0] |= BIT(EV_MSC); + input_dev->mscbit[0] |= BIT(MSC_SERIAL); + input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); + /* fall through */ + case GRAPHIRE: input_dev->evbit[0] |= BIT(EV_REL); input_dev->relbit[0] |= BIT(REL_WHEEL); diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 862e40a83689..6c693bc68e2e 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -18,4 +18,8 @@ obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_USS720) += uss720.o -obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ \ No newline at end of file +obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/ + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 5f33f7c64885..2a28ceeaa66a 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -30,7 +30,6 @@ #include #include #include -#undef DEBUG /* include debug macros until it's done */ #include /*-------------------------------------------------------------------*/ diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c index b84eda631ab5..a30d4a6ee824 100644 --- a/drivers/usb/misc/phidgetservo.c +++ b/drivers/usb/misc/phidgetservo.c @@ -26,9 +26,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -#define DEBUG 1 -#endif #include #include #include diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 7d02d8ec6b1a..9590dbac5d9a 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -393,7 +393,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) ibuf, this_read, &partial, 8000); - dbg(KERN_DEBUG "read stats: result:%d this_read:%u partial:%u", + dbg("read stats: result:%d this_read:%u partial:%u", result, this_read, partial); if (partial) { diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index f6ba4c788dbc..3c93921cb6b3 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -10,9 +10,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG - #define DEBUG 1 -#endif #include #include #include diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 2997f558159b..605a2afe34ed 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1,7 +1,4 @@ #include -#if !defined (DEBUG) && defined (CONFIG_USB_DEBUG) -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0592cb5e6c4d..1cabe7ed91f5 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -41,8 +41,6 @@ /*****************************************************************************/ -#define DEBUG - #include #include #include diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile index 222c0495f791..a21e6eaabaf6 100644 --- a/drivers/usb/net/Makefile +++ b/drivers/usb/net/Makefile @@ -16,3 +16,7 @@ obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o obj-$(CONFIG_USB_NET_ZAURUS) += zaurus.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_ZD1201) += zd1201.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c index 252a34fbb42c..542120ef1fd2 100644 --- a/drivers/usb/net/asix.c +++ b/drivers/usb/net/asix.c @@ -23,9 +23,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c index 652b04bbf6af..c008c981862b 100644 --- a/drivers/usb/net/cdc_ether.c +++ b/drivers/usb/net/cdc_ether.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c index f1730b685fd2..f05cfb83c82d 100644 --- a/drivers/usb/net/cdc_subset.c +++ b/drivers/usb/net/cdc_subset.c @@ -18,9 +18,6 @@ */ #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c index c0f263b202a6..2455e9a85674 100644 --- a/drivers/usb/net/gl620a.c +++ b/drivers/usb/net/gl620a.c @@ -22,9 +22,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index 6bef1be6b36c..b5776518020f 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -219,7 +219,6 @@ struct kaweth_device __u32 status; int end; - int removed; int suspend_lowmem_rx; int suspend_lowmem_ctrl; int linkstate; @@ -699,6 +698,7 @@ static int kaweth_close(struct net_device *net) usb_kill_urb(kaweth->irq_urb); usb_kill_urb(kaweth->rx_urb); + usb_kill_urb(kaweth->tx_urb); flush_scheduled_work(); @@ -750,13 +750,6 @@ static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net) spin_lock(&kaweth->device_lock); - if (kaweth->removed) { - /* our device is undergoing disconnection - we bail out */ - spin_unlock(&kaweth->device_lock); - dev_kfree_skb_irq(skb); - return 0; - } - kaweth_async_set_rx_mode(kaweth); netif_stop_queue(net); @@ -1136,10 +1129,6 @@ static void kaweth_disconnect(struct usb_interface *intf) return; } netdev = kaweth->net; - kaweth->removed = 1; - usb_kill_urb(kaweth->irq_urb); - usb_kill_urb(kaweth->rx_urb); - usb_kill_urb(kaweth->tx_urb); kaweth_dbg("Unregistering net device"); unregister_netdev(netdev); diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c index cee55f8cf64f..b3799b1a2b0d 100644 --- a/drivers/usb/net/net1080.c +++ b/drivers/usb/net/net1080.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c index 537eb181d985..683e3df5d607 100644 --- a/drivers/usb/net/pegasus.c +++ b/drivers/usb/net/pegasus.c @@ -28,8 +28,6 @@ * is out of the interrupt routine. */ -#undef DEBUG - #include #include #include diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c index 74c2b3581c76..89856aa0e3b8 100644 --- a/drivers/usb/net/plusb.c +++ b/drivers/usb/net/plusb.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index b5a925dc1beb..c0ecbab6f6ba 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 74f05c9c84d5..362d6907c9bb 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -34,9 +34,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c index 5d4b7d55b097..680d13957af4 100644 --- a/drivers/usb/net/zaurus.c +++ b/drivers/usb/net/zaurus.c @@ -21,9 +21,6 @@ // #define VERBOSE // more; success messages #include -#ifdef CONFIG_USB_DEBUG -# define DEBUG -#endif #include #include #include diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.history similarity index 99% rename from drivers/usb/serial/ChangeLog.old rename to drivers/usb/serial/ChangeLog.history index c1b279939bbf..52c4f7bd7a80 100644 --- a/drivers/usb/serial/ChangeLog.old +++ b/drivers/usb/serial/ChangeLog.history @@ -400,7 +400,7 @@ visor.c Change Log comments: (11/11/2001) gkh Added support for the m125 devices, and added check to prevent oopses - for Clié devices that lie about the number of ports they have. + for Clié devices that lie about the number of ports they have. (08/30/2001) gkh Added support for the Clie devices, both the 3.5 and 4.0 os versions. diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 7b5e8e4ee2bb..14f55fd26a64 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,6 +62,15 @@ config USB_SERIAL_AIRPRIME To compile this driver as a module, choose M here: the module will be called airprime. +config USB_SERIAL_ANYDATA + tristate "USB AnyData CDMA Wireless Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a AnyData CDMA device. + + To compile this driver as a module, choose M here: the + module will be called anydata. + config USB_SERIAL_BELKIN tristate "USB Belkin and Peracom Single Port Serial Driver" depends on USB_SERIAL @@ -394,15 +403,6 @@ config USB_SERIAL_MCT_U232 To compile this driver as a module, choose M here: the module will be called mct_u232. -config USB_SERIAL_NOKIA_DKU2 - tristate "USB Nokia DKU2 Driver" - depends on USB_SERIAL - help - Say Y here if you want to use a Nokia DKU2 device. - - To compile this driver as a module, choose M here: the - module will be called nokia_dku2. - config USB_SERIAL_PL2303 tristate "USB Prolific 2303 Single Port Serial Driver" depends on USB_SERIAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 55fd461793b7..f0b04420cea1 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -12,6 +12,7 @@ usbserial-obj-$(CONFIG_USB_EZUSB) += ezusb.o usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y) obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o +obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o @@ -31,7 +32,6 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o -obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o diff --git a/drivers/usb/serial/anydata.c b/drivers/usb/serial/anydata.c new file mode 100644 index 000000000000..18022a74a3dc --- /dev/null +++ b/drivers/usb/serial/anydata.c @@ -0,0 +1,123 @@ +/* + * AnyData CDMA Serial USB driver + * + * Copyright (C) 2005 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include "usb-serial.h" + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */ + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* if overridden by the user, then use their value for the size of the + * read and write urbs */ +static int buffer_size; +static int debug; + +static struct usb_driver anydata_driver = { + .owner = THIS_MODULE, + .name = "anydata", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, +}; + +static int anydata_open(struct usb_serial_port *port, struct file *filp) +{ + char *buffer; + int result = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (buffer_size) { + /* override the default buffer sizes */ + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + kfree (port->read_urb->transfer_buffer); + port->read_urb->transfer_buffer = buffer; + port->read_urb->transfer_buffer_length = buffer_size; + + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + kfree (port->write_urb->transfer_buffer); + port->write_urb->transfer_buffer = buffer; + port->write_urb->transfer_buffer_length = buffer_size; + port->bulk_out_size = buffer_size; + } + + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + usb_serial_generic_write_bulk_callback, port); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __FUNCTION__, result); + + return result; +} + +static struct usb_serial_driver anydata_device = { + .driver = { + .owner = THIS_MODULE, + .name = "anydata", + }, + .id_table = id_table, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, + .open = anydata_open, +}; + +static int __init anydata_init(void) +{ + int retval; + + retval = usb_serial_register(&anydata_device); + if (retval) + return retval; + retval = usb_register(&anydata_driver); + if (retval) + usb_serial_deregister(&anydata_device); + return retval; +} + +static void __exit anydata_exit(void) +{ + usb_deregister(&anydata_driver); + usb_serial_deregister(&anydata_device); +} + +module_init(anydata_init); +module_exit(anydata_exit); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index c5334dd89b12..c9787001cf2a 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -60,6 +60,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 8909208f506a..53a47c31cd0e 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -309,6 +309,7 @@ void usb_serial_generic_write_bulk_callback (struct urb *urb, struct pt_regs *re schedule_work(&port->work); } +EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); void usb_serial_generic_shutdown (struct usb_serial *serial) { diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c deleted file mode 100644 index fad01bef3a64..000000000000 --- a/drivers/usb/serial/nokia_dku2.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * Nokia DKU2 USB driver - * - * Copyright (C) 2004 - * Author: C Kemp - * - * This program is largely derived from work by the linux-usb group - * and associated source files. Please see the usb/serial files for - * individual credits and copyrights. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * 20.09.2005 - Matthias Blaesing - * Added short name to device structure to make driver load into kernel 2.6.13 - * - * 20.09.2005 - Matthias Blaesing - * Added usb_deregister to exit code - to allow remove and reinsert of module - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "usb-serial.h" - - -#define NOKIA_VENDOR_ID 0x0421 -#define NOKIA7600_PRODUCT_ID 0x0400 -#define NOKIA6230_PRODUCT_ID 0x040f -#define NOKIA6170_PRODUCT_ID 0x0416 -#define NOKIA6670_PRODUCT_ID 0x041d -#define NOKIA6680_PRODUCT_ID 0x041e -#define NOKIA6230i_PRODUCT_ID 0x0428 - -#define NOKIA_AT_PORT 0x82 -#define NOKIA_FBUS_PORT 0x86 - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.2" -#define DRIVER_AUTHOR "C Kemp" -#define DRIVER_DESC "Nokia DKU2 Driver" - -static struct usb_device_id id_table [] = { - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(usb, id_table); - -/* The only thing which makes this device different from a generic - * device is that we have to set an alternative configuration to make - * the relevant endpoints available. In 2.6 this is really easy... */ -static int nokia_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - int retval = -ENODEV; - - if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) { - /* the AT port */ - dev_info(&serial->dev->dev, "Nokia AT Port:\n"); - retval = 0; - } else if (serial->interface->num_altsetting == 2 && - serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) { - /* the FBUS port */ - dev_info(&serial->dev->dev, "Nokia FBUS Port:\n"); - usb_set_interface(serial->dev, 10, 1); - retval = 0; - } - - return retval; -} - -static struct usb_driver nokia_driver = { - .owner = THIS_MODULE, - .name = "nokia_dku2", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, -}; - -static struct usb_serial_driver nokia_serial_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "nokia_dku2", - }, - .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver", - .id_table = id_table, - .num_interrupt_in = 1, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .probe = nokia_probe, -}; - -static int __init nokia_init(void) -{ - int retval; - - retval = usb_serial_register(&nokia_serial_driver); - if (retval) - return retval; - - retval = usb_register(&nokia_driver); - if (retval) { - usb_serial_deregister(&nokia_serial_driver); - return retval; - } - - info(DRIVER_VERSION " " DRIVER_AUTHOR); - info(DRIVER_DESC); - - return retval; -} - -static void __exit nokia_exit(void) -{ - usb_deregister(&nokia_driver); - usb_serial_deregister(&nokia_serial_driver); -} - -module_init(nokia_init); -module_exit(nokia_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 165c119bf10e..41a45a5025b2 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -71,7 +71,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) }, { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) }, { } /* Terminating entry */ @@ -811,7 +813,9 @@ static void pl2303_update_line_status(struct usb_serial_port *port, u8 length = UART_STATE; if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && - (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65)) { + (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 || + le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 || + le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) { length = 1; status_idx = 0; } diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 7be9644f5a03..21d434d81813 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -54,7 +54,9 @@ #define SAMSUNG_PRODUCT_ID 0x8001 #define SIEMENS_VENDOR_ID 0x11f5 +#define SIEMENS_PRODUCT_ID_SX1 0x0001 #define SIEMENS_PRODUCT_ID_X65 0x0003 +#define SIEMENS_PRODUCT_ID_X75 0x0004 #define SYNTECH_VENDOR_ID 0x0745 #define SYNTECH_PRODUCT_ID 0x0001 diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 1a9679f76f5a..c41d64dbb0f0 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -115,7 +115,7 @@ config USB_STORAGE_JUMPSHOT config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)" - depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL + depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL && !PM help Say Y here to include additional code to support the Maxtor OneTouch USB hard drive's onetouch button. diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index 33c55a6261bb..fea176d7e79a 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -853,7 +853,7 @@ static int usbat_identify_device(struct us_data *us, rc = usbat_device_reset(us); if (rc != USB_STOR_TRANSPORT_GOOD) return rc; - msleep(25); + msleep(500); /* * In attempt to distinguish between HP CDRW's and Flash readers, we now diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 9e926a8f2116..0a9858f69a9b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -710,11 +710,6 @@ UNUSUAL_DEV( 0x0686, 0x4017, 0x0001, 0x0001, "DIMAGE E223", US_SC_SCSI, US_PR_DEVICE, NULL, 0 ), -UNUSUAL_DEV( 0x0693, 0x0002, 0x0100, 0x0100, - "Hagiwara", - "FlashGate SmartMedia", - US_SC_SCSI, US_PR_BULK, NULL, 0 ), - UNUSUAL_DEV( 0x0693, 0x0005, 0x0100, 0x0100, "Hagiwara", "Flashgate", @@ -1008,6 +1003,11 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, * */ #ifdef CONFIG_USB_STORAGE_ONETOUCH + UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, "Maxtor", "OneTouch External Harddrive", diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 2c856838694e..00d87f5bb7be 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -325,8 +326,8 @@ static void __init offb_init_nodriver(struct device_node *dp) int *pp, i; unsigned int len; int width = 640, height = 480, depth = 8, pitch; - unsigned *up; - unsigned long address; + unsigned int rsize, *up; + unsigned long address = 0; if ((pp = (int *) get_property(dp, "depth", &len)) != NULL && len == sizeof(int)) @@ -344,10 +345,40 @@ static void __init offb_init_nodriver(struct device_node *dp) pitch = 0x1000; } else pitch = width; - if ((up = (unsigned *) get_property(dp, "address", &len)) != NULL - && len == sizeof(unsigned)) + + rsize = (unsigned long)pitch * (unsigned long)height * + (unsigned long)(depth / 8); + + /* Try to match device to a PCI device in order to get a properly + * translated address rather then trying to decode the open firmware + * stuff in various incorrect ways + */ +#ifdef CONFIG_PCI + /* First try to locate the PCI device if any */ + { + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + if (dp == pci_device_to_OF_node(pdev)) + break; + } + if (pdev) { + for (i = 0; i < 6 && address == 0; i++) { + if ((pci_resource_flags(pdev, i) & + IORESOURCE_MEM) && + (pci_resource_len(pdev, i) >= rsize)) + address = pci_resource_start(pdev, i); + } + pci_dev_put(pdev); + } + } +#endif /* CONFIG_PCI */ + + if (address == 0 && + (up = (unsigned *) get_property(dp, "address", &len)) != NULL && + len == sizeof(unsigned)) address = (u_long) * up; - else { + if (address == 0) { for (i = 0; i < dp->n_addrs; ++i) if (dp->addrs[i].size >= pitch * height * depth / 8) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 26300fccb4fc..31b7efd94d66 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -49,6 +49,8 @@ #include #include #include +#include +#include #include #include #include @@ -121,6 +123,11 @@ #include +#include +#include +#include +#include + #undef INCLUDES #endif @@ -129,6 +136,15 @@ /* Aiee. Someone does not find a difference between int and long */ #define EXT2_IOC32_GETFLAGS _IOR('f', 1, int) #define EXT2_IOC32_SETFLAGS _IOW('f', 2, int) +#define EXT3_IOC32_GETVERSION _IOR('f', 3, int) +#define EXT3_IOC32_SETVERSION _IOW('f', 4, int) +#define EXT3_IOC32_GETRSVSZ _IOR('f', 5, int) +#define EXT3_IOC32_SETRSVSZ _IOW('f', 6, int) +#define EXT3_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int) +#ifdef CONFIG_JBD_DEBUG +#define EXT3_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int) +#endif + #define EXT2_IOC32_GETVERSION _IOR('v', 1, int) #define EXT2_IOC32_SETVERSION _IOW('v', 2, int) @@ -175,6 +191,22 @@ static int do_ext2_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg)); } +static int do_ext3_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + /* These are just misnamed, they actually get/put from/to user an int */ + switch (cmd) { + case EXT3_IOC32_GETVERSION: cmd = EXT3_IOC_GETVERSION; break; + case EXT3_IOC32_SETVERSION: cmd = EXT3_IOC_SETVERSION; break; + case EXT3_IOC32_GETRSVSZ: cmd = EXT3_IOC_GETRSVSZ; break; + case EXT3_IOC32_SETRSVSZ: cmd = EXT3_IOC_SETRSVSZ; break; + case EXT3_IOC32_GROUP_EXTEND: cmd = EXT3_IOC_GROUP_EXTEND; break; +#ifdef CONFIG_JBD_DEBUG + case EXT3_IOC32_WAIT_FOR_READONLY: cmd = EXT3_IOC_WAIT_FOR_READONLY; break; +#endif + } + return sys_ioctl(fd, cmd, (unsigned long)compat_ptr(arg)); +} + struct video_tuner32 { compat_int_t tuner; char name[32]; @@ -413,6 +445,128 @@ out: return err; } +struct compat_dmx_event { + dmx_event_t event; + compat_time_t timeStamp; + union + { + dmx_scrambling_status_t scrambling; + } u; +}; + +static int do_dmx_get_event(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct dmx_event kevent; + mm_segment_t old_fs = get_fs(); + int err; + + set_fs(KERNEL_DS); + err = sys_ioctl(fd, cmd, (unsigned long) &kevent); + set_fs(old_fs); + + if (!err) { + struct compat_dmx_event __user *up = compat_ptr(arg); + + err = put_user(kevent.event, &up->event); + err |= put_user(kevent.timeStamp, &up->timeStamp); + err |= put_user(kevent.u.scrambling, &up->u.scrambling); + if (err) + err = -EFAULT; + } + + return err; +} + +struct compat_video_event { + int32_t type; + compat_time_t timestamp; + union { + video_size_t size; + unsigned int frame_rate; + } u; +}; + +static int do_video_get_event(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct video_event kevent; + mm_segment_t old_fs = get_fs(); + int err; + + set_fs(KERNEL_DS); + err = sys_ioctl(fd, cmd, (unsigned long) &kevent); + set_fs(old_fs); + + if (!err) { + struct compat_video_event __user *up = compat_ptr(arg); + + err = put_user(kevent.type, &up->type); + err |= put_user(kevent.timestamp, &up->timestamp); + err |= put_user(kevent.u.size.w, &up->u.size.w); + err |= put_user(kevent.u.size.h, &up->u.size.h); + err |= put_user(kevent.u.size.aspect_ratio, + &up->u.size.aspect_ratio); + if (err) + err = -EFAULT; + } + + return err; +} + +struct compat_video_still_picture { + compat_uptr_t iFrame; + int32_t size; +}; + +static int do_video_stillpicture(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct compat_video_still_picture __user *up; + struct video_still_picture __user *up_native; + compat_uptr_t fp; + int32_t size; + int err; + + up = (struct compat_video_still_picture __user *) arg; + err = get_user(fp, &up->iFrame); + err |= get_user(size, &up->size); + if (err) + return -EFAULT; + + up_native = + compat_alloc_user_space(sizeof(struct video_still_picture)); + + put_user(compat_ptr(fp), &up_native->iFrame); + put_user(size, &up_native->size); + + err = sys_ioctl(fd, cmd, (unsigned long) up_native); + + return err; +} + +struct compat_video_spu_palette { + int length; + compat_uptr_t palette; +}; + +static int do_video_set_spu_palette(unsigned int fd, unsigned int cmd, unsigned long arg) +{ + struct compat_video_spu_palette __user *up; + struct video_spu_palette __user *up_native; + compat_uptr_t palp; + int length, err; + + up = (struct compat_video_spu_palette __user *) arg; + err = get_user(palp, &up->palette); + err |= get_user(length, &up->length); + + up_native = compat_alloc_user_space(sizeof(struct video_spu_palette)); + put_user(compat_ptr(palp), &up_native->palette); + put_user(length, &up_native->length); + + err = sys_ioctl(fd, cmd, (unsigned long) up_native); + + return err; +} + #ifdef CONFIG_NET static int do_siocgstamp(unsigned int fd, unsigned int cmd, unsigned long arg) { @@ -2854,6 +3008,15 @@ HANDLE_IOCTL(EXT2_IOC32_GETFLAGS, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_SETFLAGS, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_GETVERSION, do_ext2_ioctl) HANDLE_IOCTL(EXT2_IOC32_SETVERSION, do_ext2_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GETVERSION, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_SETVERSION, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GETRSVSZ, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_SETRSVSZ, do_ext3_ioctl) +HANDLE_IOCTL(EXT3_IOC32_GROUP_EXTEND, do_ext3_ioctl) +COMPATIBLE_IOCTL(EXT3_IOC_GROUP_ADD) +#ifdef CONFIG_JBD_DEBUG +HANDLE_IOCTL(EXT3_IOC32_WAIT_FOR_READONLY, do_ext3_ioctl) +#endif HANDLE_IOCTL(VIDIOCGTUNER32, do_video_ioctl) HANDLE_IOCTL(VIDIOCSTUNER32, do_video_ioctl) HANDLE_IOCTL(VIDIOCGWIN32, do_video_ioctl) @@ -2954,5 +3117,11 @@ HANDLE_IOCTL(NCP_IOC_GETPRIVATEDATA_32, do_ncp_getprivatedata) HANDLE_IOCTL(NCP_IOC_SETPRIVATEDATA_32, do_ncp_setprivatedata) #endif +/* dvb */ +HANDLE_IOCTL(DMX_GET_EVENT, do_dmx_get_event) +HANDLE_IOCTL(VIDEO_GET_EVENT, do_video_get_event) +HANDLE_IOCTL(VIDEO_STILLPICTURE, do_video_stillpicture) +HANDLE_IOCTL(VIDEO_SET_SPU_PALETTE, do_video_set_spu_palette) + #undef DECLARES #endif diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 7d0ab791b16c..9fc4bcfa1681 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -19,7 +19,7 @@ */ #include #include -#include +#include #include #undef CLPS7111_BASE diff --git a/include/asm-arm/arch-epxa10db/uncompress.h b/include/asm-arm/arch-epxa10db/uncompress.h index d33ad6a93749..fdfe0e6848f8 100644 --- a/include/asm-arm/arch-epxa10db/uncompress.h +++ b/include/asm-arm/arch-epxa10db/uncompress.h @@ -19,7 +19,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include "asm/arch/platform.h" -#include "asm/arch/hardware.h" +#include "asm/hardware.h" #define UART00_TYPE (volatile unsigned int*) #include "asm/arch/uart00.h" diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h index 2fffacf85a01..9535764bcc71 100644 --- a/include/asm-arm/arch-h720x/uncompress.h +++ b/include/asm-arm/arch-h720x/uncompress.h @@ -7,7 +7,7 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -#include +#include #define LSR 0x14 #define TEMPTY 0x40 diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h index 238197cfb9d9..f195542898e0 100644 --- a/include/asm-arm/arch-imx/irqs.h +++ b/include/asm-arm/arch-imx/irqs.h @@ -23,7 +23,7 @@ #define __ARM_IRQS_H__ /* Use the imx definitions */ -#include +#include /* * IMX Interrupt numbers diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h index d65ab3cd5d5d..8c91674706b1 100644 --- a/include/asm-arm/arch-imx/timex.h +++ b/include/asm-arm/arch-imx/timex.h @@ -21,7 +21,7 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -#include +#include #define CLOCK_TICK_RATE (CLK32) #endif diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h index 0ec7093f7c37..da6981efdc39 100644 --- a/include/asm-arm/arch-integrator/smp.h +++ b/include/asm-arm/arch-integrator/smp.h @@ -3,7 +3,7 @@ #include -#include +#include #include #define hard_smp_processor_id() \ diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h index 688f7f90d93e..942b622455bc 100644 --- a/include/asm-arm/arch-ixp4xx/io.h +++ b/include/asm-arm/arch-ixp4xx/io.h @@ -59,11 +59,10 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); * fallback to the default. */ static inline void __iomem * -__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags, unsigned long align) +__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags) { - extern void __iomem * __ioremap(unsigned long, size_t, unsigned long, unsigned long); if((addr < 0x48000000) || (addr > 0x4fffffff)) - return __ioremap(addr, size, flags, align); + return __ioremap(addr, size, flags); return (void *)addr; } @@ -71,13 +70,11 @@ __ixp4xx_ioremap(unsigned long addr, size_t size, unsigned long flags, unsigned static inline void __ixp4xx_iounmap(void __iomem *addr) { - extern void __iounmap(void __iomem *addr); - if ((u32)addr >= VMALLOC_START) __iounmap(addr); } -#define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x) +#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f) #define __arch_iounmap(a) __ixp4xx_iounmap(a) #define writeb(v, p) __ixp4xx_writeb(v, p) diff --git a/include/asm-arm/arch-l7200/aux_reg.h b/include/asm-arm/arch-l7200/aux_reg.h index 762cbc76c501..5b4396de16a0 100644 --- a/include/asm-arm/arch-l7200/aux_reg.h +++ b/include/asm-arm/arch-l7200/aux_reg.h @@ -9,7 +9,7 @@ #ifndef _ASM_ARCH_AUXREG_H #define _ASM_ARCH_AUXREG_H -#include +#include #define l7200aux_reg *((volatile unsigned int *) (AUX_BASE)) diff --git a/include/asm-arm/arch-l7200/gp_timers.h b/include/asm-arm/arch-l7200/gp_timers.h index 6f20962df248..9c4804d13578 100644 --- a/include/asm-arm/arch-l7200/gp_timers.h +++ b/include/asm-arm/arch-l7200/gp_timers.h @@ -10,7 +10,7 @@ #ifndef _ASM_ARCH_GPTIMERS_H #define _ASM_ARCH_GPTIMERS_H -#include +#include /* * Layout of L7200 general purpose timer registers diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 1b3885741ac1..f486b72070ea 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -26,7 +26,7 @@ #ifndef __ASM_ARCH_OMAP_GPIO_H #define __ASM_ARCH_OMAP_GPIO_H -#include +#include #include #include diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 9779686bdceb..4ffce1d77759 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -260,7 +260,7 @@ extern void omap_init_irq(void); * The definition of NR_IRQS is in board-specific header file, which is * included via hardware.h */ -#include +#include #ifndef NR_IRQS #define NR_IRQS IH_BOARD_BASE diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h index 305bdeb16ab8..e79d98ab2ab6 100644 --- a/include/asm-arm/arch-omap/mcbsp.h +++ b/include/asm-arm/arch-omap/mcbsp.h @@ -24,7 +24,7 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H -#include +#include #define OMAP730_MCBSP1_BASE 0xfffb1000 #define OMAP730_MCBSP2_BASE 0xfffb1800 diff --git a/include/asm-arm/arch-omap/system.h b/include/asm-arm/arch-omap/system.h index b43cdd2a3874..9af415d2944a 100644 --- a/include/asm-arm/arch-omap/system.h +++ b/include/asm-arm/arch-omap/system.h @@ -7,7 +7,7 @@ #include #include #include -#include +#include #include #ifndef CONFIG_MACH_VOICEBLUE diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index 67879cdb6ef2..9ca76dc3a7af 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -27,5 +27,6 @@ /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) +#define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h index 9f8fcbca0869..6f3d0ce0ca1e 100644 --- a/include/asm-arm/arch-realview/system.h +++ b/include/asm-arm/arch-realview/system.h @@ -36,7 +36,7 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET); + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; unsigned int val; /* diff --git a/include/asm-arm/arch-rpc/system.h b/include/asm-arm/arch-rpc/system.h index ca3277d1d5ea..729c2ae4b513 100644 --- a/include/asm-arm/arch-rpc/system.h +++ b/include/asm-arm/arch-rpc/system.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include +#include #include #include diff --git a/include/asm-arm/arch-sa1100/memory.h b/include/asm-arm/arch-sa1100/memory.h index 0fc555b4c912..018a9f0e3986 100644 --- a/include/asm-arm/arch-sa1100/memory.h +++ b/include/asm-arm/arch-sa1100/memory.h @@ -18,20 +18,10 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_SA1111 -static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) -{ - unsigned int sz = SZ_1M >> PAGE_SHIFT; - - if (node != 0) - sz = 0; - - size[1] = size[0] - sz; - size[0] = sz; -} +void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); #define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) + sa1111_adjust_zones(node, size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) diff --git a/include/asm-arm/atomic.h b/include/asm-arm/atomic.h index 75b802719723..d586f65c8228 100644 --- a/include/asm-arm/atomic.h +++ b/include/asm-arm/atomic.h @@ -12,6 +12,7 @@ #define __ASM_ARM_ATOMIC_H #include +#include typedef struct { volatile int counter; } atomic_t; @@ -82,11 +83,12 @@ static inline int atomic_sub_return(int i, atomic_t *v) static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { - u32 oldval, res; + unsigned long oldval, res; do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" + "mov %0, #0\n" "teq %1, %3\n" "strexeq %0, %4, [%2]\n" : "=&r" (res), "=&r" (oldval) diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index e007dd990da5..7399d431edfe 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -19,6 +19,7 @@ #ifdef __KERNEL__ +#include #include #define smp_mb__before_clear_bit() mb() diff --git a/include/asm-arm/hardware/amba_serial.h b/include/asm-arm/hardware/amba_serial.h index 71770aa6389f..dc726ffccebd 100644 --- a/include/asm-arm/hardware/amba_serial.h +++ b/include/asm-arm/hardware/amba_serial.h @@ -50,6 +50,11 @@ #define UART011_ICR 0x44 /* Interrupt clear register. */ #define UART011_DMACR 0x48 /* DMA control register. */ +#define UART011_DR_OE (1 << 11) +#define UART011_DR_BE (1 << 10) +#define UART011_DR_PE (1 << 9) +#define UART011_DR_FE (1 << 8) + #define UART01x_RSR_OE 0x08 #define UART01x_RSR_BE 0x04 #define UART01x_RSR_PE 0x02 diff --git a/include/asm-arm/hardware/dec21285.h b/include/asm-arm/hardware/dec21285.h index 9049f0ddaecf..6685e3fb97b1 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/include/asm-arm/hardware/dec21285.h @@ -20,7 +20,7 @@ #include #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 2e6799632f12..ae69db4a1010 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -54,6 +54,12 @@ extern void __raw_readsl(void __iomem *addr, void *data, int longlen); #define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) #define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) +/* + * Architecture ioremap implementation. + */ +extern void __iomem * __ioremap(unsigned long, size_t, unsigned long); +extern void __iounmap(void __iomem *addr); + /* * Bad read/write accesses... */ @@ -256,18 +262,15 @@ out: * ioremap takes a PCI memory address, as specified in * Documentation/IO-mapping.txt. */ -extern void __iomem * __ioremap(unsigned long, size_t, unsigned long, unsigned long); -extern void __iounmap(void __iomem *addr); - #ifndef __arch_ioremap -#define ioremap(cookie,size) __ioremap(cookie,size,0,1) -#define ioremap_nocache(cookie,size) __ioremap(cookie,size,0,1) -#define ioremap_cached(cookie,size) __ioremap(cookie,size,L_PTE_CACHEABLE,1) +#define ioremap(cookie,size) __ioremap(cookie,size,0) +#define ioremap_nocache(cookie,size) __ioremap(cookie,size,0) +#define ioremap_cached(cookie,size) __ioremap(cookie,size,L_PTE_CACHEABLE) #define iounmap(cookie) __iounmap(cookie) #else -#define ioremap(cookie,size) __arch_ioremap((cookie),(size),0,1) -#define ioremap_nocache(cookie,size) __arch_ioremap((cookie),(size),0,1) -#define ioremap_cached(cookie,size) __arch_ioremap((cookie),(size),L_PTE_CACHEABLE,1) +#define ioremap(cookie,size) __arch_ioremap((cookie),(size),0) +#define ioremap_nocache(cookie,size) __arch_ioremap((cookie),(size),0) +#define ioremap_cached(cookie,size) __arch_ioremap((cookie),(size),L_PTE_CACHEABLE) #define iounmap(cookie) __arch_iounmap(cookie) #endif diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 3d4b810d8c38..81c59facea3b 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARM_MMU_CONTEXT_H #define __ASM_ARM_MMU_CONTEXT_H +#include #include #include diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 8efa4ebdcacb..5621d61ebc07 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -93,8 +93,6 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *), int sig, const char *name); -#include - #define xchg(ptr,x) \ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) @@ -102,6 +100,8 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, extern asmlinkage void __backtrace(void); extern asmlinkage void c_backtrace(unsigned long fp, int pmode); + +struct mm_struct; extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 8252a4cd860f..7c98557b717f 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -12,6 +12,7 @@ #ifdef __KERNEL__ +#include #include #define THREAD_SIZE_ORDER 1 diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h index a2fdad0138b3..064f0f5e8e2b 100644 --- a/include/asm-arm/uaccess.h +++ b/include/asm-arm/uaccess.h @@ -100,7 +100,6 @@ static inline void set_fs (mm_segment_t fs) extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -extern int __get_user_8(void *); extern int __get_user_bad(void); #define __get_user_x(__r2,__p,__e,__s,__i...) \ @@ -114,7 +113,7 @@ extern int __get_user_bad(void); #define get_user(x,p) \ ({ \ const register typeof(*(p)) __user *__p asm("r0") = (p);\ - register typeof(*(p)) __r2 asm("r2"); \ + register unsigned int __r2 asm("r2"); \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ @@ -126,12 +125,9 @@ extern int __get_user_bad(void); case 4: \ __get_user_x(__r2, __p, __e, 4, "lr"); \ break; \ - case 8: \ - __get_user_x(__r2, __p, __e, 8, "lr"); \ - break; \ default: __e = __get_user_bad(); break; \ } \ - x = __r2; \ + x = (typeof(*(p))) __r2; \ __e; \ }) diff --git a/include/asm-i386/signal.h b/include/asm-i386/signal.h index cbb47d34aa31..76524b4052ac 100644 --- a/include/asm-i386/signal.h +++ b/include/asm-i386/signal.h @@ -159,14 +159,37 @@ typedef struct sigaltstack { #define __HAVE_ARCH_SIG_BITOPS -static __inline__ void sigaddset(sigset_t *set, int _sig) +#define sigaddset(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigaddset((set),(sig)) : \ + __gen_sigaddset((set),(sig))) + +static __inline__ void __gen_sigaddset(sigset_t *set, int _sig) { - __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); + __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc"); } -static __inline__ void sigdelset(sigset_t *set, int _sig) +static __inline__ void __const_sigaddset(sigset_t *set, int _sig) { - __asm__("btrl %1,%0" : "=m"(*set) : "Ir"(_sig - 1) : "cc"); + unsigned long sig = _sig - 1; + set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW); +} + +#define sigdelset(set,sig) \ + (__builtin_constant_p(sig) ? \ + __const_sigdelset((set),(sig)) : \ + __gen_sigdelset((set),(sig))) + + +static __inline__ void __gen_sigdelset(sigset_t *set, int _sig) +{ + __asm__("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc"); +} + +static __inline__ void __const_sigdelset(sigset_t *set, int _sig) +{ + unsigned long sig = _sig - 1; + set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW)); } static __inline__ int __const_sigismember(sigset_t *set, int _sig) diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index 2c87b41e69ba..55c37c106ef0 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -231,11 +231,12 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) } /* - * atomic_sub_if_positive - add integer to atomic variable + * atomic_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract * @v: pointer of type atomic_t * - * Atomically test @v and decrement if it is greater than 0. - * The function returns the old value of @v minus 1. + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. */ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { @@ -577,11 +578,12 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) } /* - * atomic64_sub_if_positive - add integer to atomic variable + * atomic64_sub_if_positive - conditionally subtract integer from atomic variable + * @i: integer value to subtract * @v: pointer of type atomic64_t * - * Atomically test @v and decrement if it is greater than 0. - * The function returns the old value of @v minus 1. + * Atomically test @v and subtract @i if @v is greater or equal than @i. + * The function returns the old value of @v minus @i. */ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 3061870b7f6c..d42685747e7d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -459,10 +459,10 @@ __BUILDIO(q, u64) #define __BUILD_MEMORY_STRING(bwlq, type) \ \ -static inline void writes##bwlq(volatile void __iomem *mem, void *addr, \ - unsigned int count) \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ { \ - volatile type *__addr = addr; \ + const volatile type *__addr = addr; \ \ while (count--) { \ mem_write##bwlq(*__addr, mem); \ diff --git a/include/asm-mips/ip32/crime.h b/include/asm-mips/ip32/crime.h index 152879bae20f..a13702fafa85 100644 --- a/include/asm-mips/ip32/crime.h +++ b/include/asm-mips/ip32/crime.h @@ -154,7 +154,7 @@ struct sgi_crime { #define CRIME_MEM_ERROR_ECC_REPL_MASK 0xffffffff }; -extern struct sgi_crime *crime; +extern struct sgi_crime __iomem *crime; #define CRIME_HI_MEM_BASE 0x40000000 /* this is where whole 1G of RAM is mapped */ diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h index 5bdc51d85b6c..990082c81f39 100644 --- a/include/asm-mips/ip32/mace.h +++ b/include/asm-mips/ip32/mace.h @@ -150,24 +150,34 @@ struct mace_audio { /* register definitions for parallel port DMA */ struct mace_parport { -/* 0 - do nothing, 1 - pulse terminal count to the device after buffer is drained */ -#define MACEPAR_CONTEXT_LASTFLAG BIT(63) -/* Should not cross 4K page boundary */ -#define MACEPAR_CONTEXT_DATALEN_MASK 0xfff00000000 -/* Can be arbitrarily aligned on any byte boundary on output, 64 byte aligned on input */ -#define MACEPAR_CONTEXT_BASEADDR_MASK 0xffffffff + /* 0 - do nothing, + * 1 - pulse terminal count to the device after buffer is drained */ +#define MACEPAR_CONTEXT_LASTFLAG BIT(63) + /* Should not cross 4K page boundary */ +#define MACEPAR_CONTEXT_DATA_BOUND 0x0000000000001000UL +#define MACEPAR_CONTEXT_DATALEN_MASK 0x00000fff00000000UL +#define MACEPAR_CONTEXT_DATALEN_SHIFT 32 + /* Can be arbitrarily aligned on any byte boundary on output, + * 64 byte aligned on input */ +#define MACEPAR_CONTEXT_BASEADDR_MASK 0x00000000ffffffffUL volatile u64 context_a; volatile u64 context_b; -#define MACEPAR_CTLSTAT_DIRECTION BIT(0) /* 0 - mem->device, 1 - device->mem */ -#define MACEPAR_CTLSTAT_ENABLE BIT(1) /* 0 - channel frozen, 1 - channel enabled */ -#define MACEPAR_CTLSTAT_RESET BIT(2) /* 0 - channel active, 1 - complete channel reset */ -#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) -#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) - volatile u64 cntlstat; /* Control/Status register */ -#define MACEPAR_DIAG_CTXINUSE BIT(1) -#define MACEPAR_DIAG_DMACTIVE BIT(2) /* 1 - Dma engine is enabled and processing something */ -#define MACEPAR_DIAG_CTRMASK 0x3ffc /* Counter of bytes left */ - volatile u64 diagnostic; /* RO: diagnostic register */ + /* 0 - mem->device, 1 - device->mem */ +#define MACEPAR_CTLSTAT_DIRECTION BIT(0) + /* 0 - channel frozen, 1 - channel enabled */ +#define MACEPAR_CTLSTAT_ENABLE BIT(1) + /* 0 - channel active, 1 - complete channel reset */ +#define MACEPAR_CTLSTAT_RESET BIT(2) +#define MACEPAR_CTLSTAT_CTXB_VALID BIT(3) +#define MACEPAR_CTLSTAT_CTXA_VALID BIT(4) + volatile u64 cntlstat; /* Control/Status register */ +#define MACEPAR_DIAG_CTXINUSE BIT(0) + /* 1 - Dma engine is enabled and processing something */ +#define MACEPAR_DIAG_DMACTIVE BIT(1) + /* Counter of bytes left */ +#define MACEPAR_DIAG_CTRMASK 0x0000000000003ffcUL +#define MACEPAR_DIAG_CTRSHIFT 2 + volatile u64 diagnostic; /* RO: diagnostic register */ }; /* ISA Control and DMA registers */ @@ -353,6 +363,6 @@ struct sgi_mace { char _pad6[0x80000 - sizeof(struct mace_isa)]; }; -extern struct sgi_mace *mace; +extern struct sgi_mace __iomem *mace; #endif /* __ASM_MACE_H__ */ diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h index 5d894376fc1a..647fdb54cc1d 100644 --- a/include/asm-mips/mach-db1x00/db1200.h +++ b/include/asm-mips/mach-db1x00/db1200.h @@ -220,5 +220,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BOARD_PC1_INT DB1200_PC1_INT #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* Nand chip select */ +#define NAND_CS 1 + #endif /* __ASM_DB1200_H */ diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index efafe65258b6..7b28b23f91ce 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -200,6 +200,12 @@ typedef volatile struct ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_CS 1 + +/* should be done by yamon */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_DB1X00_H */ diff --git a/include/asm-mips/mach-ip32/mc146818rtc.h b/include/asm-mips/mach-ip32/mc146818rtc.h index f5d780ff843f..c28ba8d84076 100644 --- a/include/asm-mips/mach-ip32/mc146818rtc.h +++ b/include/asm-mips/mach-ip32/mc146818rtc.h @@ -11,7 +11,6 @@ #ifndef __ASM_MACH_IP32_MC146818RTC_H #define __ASM_MACH_IP32_MC146818RTC_H -#include #include #define RTC_PORT(x) (0x70 + (x)) @@ -26,8 +25,10 @@ static inline void CMOS_WRITE(unsigned char data, unsigned long addr) mace->isa.rtc[addr << 8] = data; } -/* FIXME: Do it right. For now just assume that noone lives in 20th century - * and no O2 user in 22th century ;-) */ +/* + * FIXME: Do it right. For now just assume that noone lives in 20th century + * and no O2 user in 22th century ;-) + */ #define mc146818_decode_year(year) ((year) + 2000) #define RTC_ALWAYS_BCD 0 diff --git a/include/asm-mips/mach-jmr3927/asm/ds1742.h b/include/asm-mips/mach-jmr3927/ds1742.h similarity index 74% rename from include/asm-mips/mach-jmr3927/asm/ds1742.h rename to include/asm-mips/mach-jmr3927/ds1742.h index 134a4b6c334a..cff6192d4bdb 100644 --- a/include/asm-mips/mach-jmr3927/asm/ds1742.h +++ b/include/asm-mips/mach-jmr3927/ds1742.h @@ -5,12 +5,12 @@ * * Copyright (C) 2003 by Ralf Baechle */ -#ifndef __ASM_MACH_JMR3927_ASM_DS1742_H -#define __ASM_MACH_JMR3927_ASM_DS1742_H +#ifndef __ASM_MACH_JMR3927_DS1742_H +#define __ASM_MACH_JMR3927_DS1742_H #include #define rtc_read(reg) (jmr3927_nvram_in(addr)) #define rtc_write(data, reg) (jmr3927_nvram_out((data),(reg))) -#endif /* __ASM_MACH_JMR3927_ASM_DS1742_H */ +#endif /* __ASM_MACH_JMR3927_DS1742_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h index 9a3088b19bf3..409d443322c1 100644 --- a/include/asm-mips/mach-pb1x00/pb1200.h +++ b/include/asm-mips/mach-pb1x00/pb1200.h @@ -248,5 +248,8 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BOARD_PC1_INT PB1200_PC1_INT #define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET))) +/* Nand chip select */ +#define NAND_CS 1 + #endif /* __ASM_PB1200_H */ diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h index 431d6088ea96..9578ead11e8a 100644 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -166,4 +166,11 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_CS 1 + +/* should be done by yamon */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ + #endif /* __ASM_PB1550_H */ diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h index c3dcfcb928b6..365c2a3c64f5 100644 --- a/include/asm-mips/mips-boards/seadint.h +++ b/include/asm-mips/mips-boards/seadint.h @@ -20,9 +20,14 @@ #ifndef _MIPS_SEADINT_H #define _MIPS_SEADINT_H -#define SEADINT_UART0 2 -#define SEADINT_UART1 3 +/* + * Interrupts 0..7 are used for SEAD CPU interrupts + */ +#define MIPSCPU_INT_BASE 0 -extern void seadint_init(void); +#define MIPSCPU_INT_UART0 2 +#define MIPSCPU_INT_UART1 3 + +#define MIPSCPU_INT_CPUCTR 7 #endif /* !(_MIPS_SEADINT_H) */ diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h index 8ca539e80d87..6fe903e09c62 100644 --- a/include/asm-mips/signal.h +++ b/include/asm-mips/signal.h @@ -155,27 +155,6 @@ typedef struct sigaltstack { #ifdef __KERNEL__ #include -/* - * The following break codes are or were in use for specific purposes in - * other MIPS operating systems. Linux/MIPS doesn't use all of them. The - * unused ones are here as placeholders; we might encounter them in - * non-Linux/MIPS object files or make use of them in the future. - */ -#define BRK_USERBP 0 /* User bp (used by debuggers) */ -#define BRK_KERNELBP 1 /* Break in the kernel */ -#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */ -#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */ -#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */ -#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */ -#define BRK_OVERFLOW 6 /* Overflow check */ -#define BRK_DIVZERO 7 /* Divide by zero check */ -#define BRK_RANGE 8 /* Range error check */ -#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */ -#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */ -#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */ -#define BRK_MULOVF 1023 /* Multiply overflow */ -#define BRK_BUG 512 /* Used by BUG() */ - #define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif /* __KERNEL__ */ diff --git a/include/asm-parisc/irq.h b/include/asm-parisc/irq.h index f876bdf22056..b0a30e2c9813 100644 --- a/include/asm-parisc/irq.h +++ b/include/asm-parisc/irq.h @@ -8,6 +8,7 @@ #define _ASM_PARISC_IRQ_H #include +#include #include #define NO_IRQ (-1) @@ -49,10 +50,10 @@ extern int txn_alloc_irq(unsigned int nbits); extern int txn_claim_irq(int); extern unsigned int txn_alloc_data(unsigned int); extern unsigned long txn_alloc_addr(unsigned int); +extern unsigned long txn_affinity_addr(unsigned int irq, int cpu); extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *); - -extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *); +extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest); /* soft power switch support (power.c) */ extern struct tasklet_struct power_tasklet; diff --git a/include/asm-parisc/smp.h b/include/asm-parisc/smp.h index 9413f67a540b..dbdbd2e9fdf9 100644 --- a/include/asm-parisc/smp.h +++ b/include/asm-parisc/smp.h @@ -29,6 +29,7 @@ extern cpumask_t cpu_online_map; #define cpu_logical_map(cpu) (cpu) extern void smp_send_reschedule(int cpu); +extern void smp_send_all_nop(void); #endif /* !ASSEMBLY */ @@ -53,7 +54,11 @@ extern unsigned long cpu_present_mask; #define raw_smp_processor_id() (current_thread_info()->cpu) -#endif /* CONFIG_SMP */ +#else /* CONFIG_SMP */ + +static inline void smp_send_all_nop(void) { return; } + +#endif #define NO_PROC_ID 0xFF /* No processor magic marker */ #define ANY_PROC_ID 0xFF /* Any processor magic marker */ diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h index 7c3f406a746a..16c2ac075fc5 100644 --- a/include/asm-parisc/spinlock.h +++ b/include/asm-parisc/spinlock.h @@ -11,18 +11,25 @@ static inline int __raw_spin_is_locked(raw_spinlock_t *x) return *a == 0; } -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0) #define __raw_spin_unlock_wait(x) \ do { cpu_relax(); } while (__raw_spin_is_locked(x)) -static inline void __raw_spin_lock(raw_spinlock_t *x) +static inline void __raw_spin_lock_flags(raw_spinlock_t *x, + unsigned long flags) { volatile unsigned int *a; mb(); a = __ldcw_align(x); while (__ldcw(a) == 0) - while (*a == 0); + while (*a == 0) + if (flags & PSW_SM_I) { + local_irq_enable(); + cpu_relax(); + local_irq_disable(); + } else + cpu_relax(); mb(); } @@ -60,26 +67,20 @@ static inline int __raw_spin_trylock(raw_spinlock_t *x) static __inline__ void __raw_read_lock(raw_rwlock_t *rw) { - unsigned long flags; - local_irq_save(flags); __raw_spin_lock(&rw->lock); rw->counter++; __raw_spin_unlock(&rw->lock); - local_irq_restore(flags); } static __inline__ void __raw_read_unlock(raw_rwlock_t *rw) { - unsigned long flags; - local_irq_save(flags); __raw_spin_lock(&rw->lock); rw->counter--; __raw_spin_unlock(&rw->lock); - local_irq_restore(flags); } /* write_lock is less trivial. We optimistically grab the lock and check diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h index e97aa8d1eff5..c9ec39c6fc6c 100644 --- a/include/asm-parisc/tlbflush.h +++ b/include/asm-parisc/tlbflush.h @@ -12,21 +12,15 @@ * N class systems, only one PxTLB inter processor broadcast can be * active at any one time on the Merced bus. This tlb purge * synchronisation is fairly lightweight and harmless so we activate - * it on all SMP systems not just the N class. */ -#ifdef CONFIG_SMP + * it on all SMP systems not just the N class. We also need to have + * preemption disabled on uniprocessor machines, and spin_lock does that + * nicely. + */ extern spinlock_t pa_tlb_lock; #define purge_tlb_start(x) spin_lock(&pa_tlb_lock) #define purge_tlb_end(x) spin_unlock(&pa_tlb_lock) -#else - -#define purge_tlb_start(x) do { } while(0) -#define purge_tlb_end(x) do { } while (0) - -#endif - - extern void flush_tlb_all(void); /* @@ -88,7 +82,6 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */ flush_tlb_all(); else { - preempt_disable(); mtsp(vma->vm_mm->context,1); purge_tlb_start(); if (split_tlb) { @@ -102,7 +95,6 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, pdtlb(start); start += PAGE_SIZE; } - preempt_enable(); } purge_tlb_end(); } diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 04e2726002cf..d1cfa3f515ea 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -90,6 +90,7 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000) #define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000) #define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000) +#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #ifdef __powerpc64__ /* Add the 64b processor unique features in the top half of the word */ @@ -97,7 +98,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0000000200000000) #define CPU_FTR_TLBIEL ASM_CONST(0x0000000400000000) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000800000000) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000001000000000) #define CPU_FTR_IABR ASM_CONST(0x0000002000000000) #define CPU_FTR_MMCRA ASM_CONST(0x0000004000000000) #define CPU_FTR_CTRL ASM_CONST(0x0000008000000000) @@ -113,7 +113,6 @@ extern void do_cpu_ftr_fixups(unsigned long offset); #define CPU_FTR_16M_PAGE ASM_CONST(0x0) #define CPU_FTR_TLBIEL ASM_CONST(0x0) #define CPU_FTR_NOEXECUTE ASM_CONST(0x0) -#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0) #define CPU_FTR_IABR ASM_CONST(0x0) #define CPU_FTR_MMCRA ASM_CONST(0x0) #define CPU_FTR_CTRL ASM_CONST(0x0) @@ -273,18 +272,21 @@ enum { CPU_FTRS_POWER3_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, CPU_FTRS_POWER4_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | - CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE, + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_NODSISRALIGN, CPU_FTRS_970_32 = CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_ALTIVEC_COMP | - CPU_FTR_MAYBE_CAN_NAP, + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN, CPU_FTRS_8XX = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - CPU_FTRS_E200 = CPU_FTR_USE_TB, - CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, + CPU_FTRS_40X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_44X = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, + CPU_FTRS_E200 = CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN, + CPU_FTRS_E500 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | + CPU_FTR_NODSISRALIGN, CPU_FTRS_E500_2 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | - CPU_FTR_BIG_PHYS, - CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON, + CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN, + CPU_FTRS_GENERIC_32 = CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN, #ifdef __powerpc64__ CPU_FTRS_POWER3 = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_IABR, diff --git a/include/asm-powerpc/delay.h b/include/asm-powerpc/delay.h index 1492aa9ab716..54fe1f4f8fd0 100644 --- a/include/asm-powerpc/delay.h +++ b/include/asm-powerpc/delay.h @@ -13,43 +13,7 @@ * Anton Blanchard. */ -extern unsigned long tb_ticks_per_usec; - -#ifdef CONFIG_PPC64 -/* define these here to prevent circular dependencies */ -/* these instructions control the thread priority on multi-threaded cpus */ -#define __HMT_low() asm volatile("or 1,1,1") -#define __HMT_medium() asm volatile("or 2,2,2") -#else -#define __HMT_low() -#define __HMT_medium() -#endif - -#define __barrier() asm volatile("" ::: "memory") - -static inline unsigned long __get_tb(void) -{ - unsigned long rval; - - asm volatile("mftb %0" : "=r" (rval)); - return rval; -} - -static inline void __delay(unsigned long loops) -{ - unsigned long start = __get_tb(); - - while((__get_tb() - start) < loops) - __HMT_low(); - __HMT_medium(); - __barrier(); -} - -static inline void udelay(unsigned long usecs) -{ - unsigned long loops = tb_ticks_per_usec * usecs; - - __delay(loops); -} +extern void __delay(unsigned long loops); +extern void udelay(unsigned long usecs); #endif /* _ASM_POWERPC_DELAY_H */ diff --git a/include/asm-ppc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h similarity index 56% rename from include/asm-ppc/dma-mapping.h rename to include/asm-powerpc/dma-mapping.h index 6e9635114433..59a80163f75f 100644 --- a/include/asm-ppc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -1,15 +1,22 @@ /* - * This is based on both include/asm-sh/dma-mapping.h and - * include/asm-ppc/pci.h + * Copyright (C) 2004 IBM + * + * Implements the generic device dma API for powerpc. + * the pci and vio busses */ -#ifndef __ASM_PPC_DMA_MAPPING_H -#define __ASM_PPC_DMA_MAPPING_H +#ifndef _ASM_DMA_MAPPING_H +#define _ASM_DMA_MAPPING_H #include +#include +#include /* need struct page definitions */ #include #include #include +#include + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) #ifdef CONFIG_NOT_COHERENT_CACHE /* @@ -24,22 +31,12 @@ extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, size_t size, int direction); -#define dma_cache_inv(_start,_size) \ - invalidate_dcache_range(_start, (_start + _size)) -#define dma_cache_wback(_start,_size) \ - clean_dcache_range(_start, (_start + _size)) -#define dma_cache_wback_inv(_start,_size) \ - flush_dcache_range(_start, (_start + _size)) #else /* ! CONFIG_NOT_COHERENT_CACHE */ /* * Cache coherent cores. */ -#define dma_cache_inv(_start,_size) do { } while (0) -#define dma_cache_wback(_start,_size) do { } while (0) -#define dma_cache_wback_inv(_start,_size) do { } while (0) - #define __dma_alloc_coherent(gfp, size, handle) NULL #define __dma_free_coherent(size, addr) do { } while (0) #define __dma_sync(addr, size, rw) do { } while (0) @@ -47,6 +44,30 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, #endif /* ! CONFIG_NOT_COHERENT_CACHE */ +#ifdef CONFIG_PPC64 + +extern int dma_supported(struct device *dev, u64 mask); +extern int dma_set_mask(struct device *dev, u64 dma_mask); +extern void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); +extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle); +extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, enum dma_data_direction direction); +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); +extern dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction); +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction); +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nhwentries, enum dma_data_direction direction); + +#else /* CONFIG_PPC64 */ + #define dma_supported(dev, mask) (1) static inline int dma_set_mask(struct device *dev, u64 dma_mask) @@ -144,29 +165,27 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, /* We don't do anything here. */ #define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, - size_t size, - enum dma_data_direction direction) +#endif /* CONFIG_PPC64 */ + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) { BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); } -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, - size_t size, - enum dma_data_direction direction) +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) { BUG_ON(direction == DMA_NONE); - __dma_sync(bus_to_virt(dma_handle), size, direction); } -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) { int i; @@ -176,9 +195,9 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, __dma_sync_page(sg->page, sg->offset, sg->length, direction); } -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) { int i; @@ -188,6 +207,15 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, __dma_sync_page(sg->page, sg->offset, sg->length, direction); } +static inline int dma_mapping_error(dma_addr_t dma_addr) +{ +#ifdef CONFIG_PPC64 + return (dma_addr == DMA_ERROR_CODE); +#else + return 0; +#endif +} + #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) #ifdef CONFIG_NOT_COHERENT_CACHE @@ -198,40 +226,60 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, static inline int dma_get_cache_alignment(void) { +#ifdef CONFIG_PPC64 + /* no easy way to get cache size on all processors, so return + * the maximum possible, to be safe */ + return (1 << L1_CACHE_SHIFT_MAX); +#else /* * Each processor family will define its own L1_CACHE_SHIFT, * L1_CACHE_BYTES wraps to this, so this is always safe. */ return L1_CACHE_BYTES; +#endif } -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) { /* just sync everything for now */ dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction); } -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, unsigned long offset, size_t size, + enum dma_data_direction direction) { /* just sync everything for now */ dma_sync_single_for_device(dev, dma_handle, offset + size, direction); } static inline void dma_cache_sync(void *vaddr, size_t size, - enum dma_data_direction direction) + enum dma_data_direction direction) { + BUG_ON(direction == DMA_NONE); __dma_sync(vaddr, size, (int)direction); } -static inline int dma_mapping_error(dma_addr_t dma_addr) -{ - return 0; -} +/* + * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO + */ +struct dma_mapping_ops { + void * (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *dev, void *ptr, + size_t size, enum dma_data_direction direction); + void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction); + int (*map_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + void (*unmap_sg)(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); + int (*dma_supported)(struct device *dev, u64 mask); + int (*dac_dma_supported)(struct device *dev, u64 mask); +}; -#endif /* __ASM_PPC_DMA_MAPPING_H */ +#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h index 89f26ab31908..f8633aafe4ba 100644 --- a/include/asm-powerpc/eeh.h +++ b/include/asm-powerpc/eeh.h @@ -30,6 +30,8 @@ struct device_node; #ifdef CONFIG_EEH +extern int eeh_subsystem_enabled; + /* Values for eeh_mode bits in device_node */ #define EEH_MODE_SUPPORTED (1<<0) #define EEH_MODE_NOCHECK (1<<1) @@ -75,7 +77,7 @@ void eeh_remove_device(struct pci_dev *); * If this macro yields TRUE, the caller relays to eeh_check_failure() * which does further tests out of line. */ -#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0) +#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled) /* * Reads from a device which has been isolated by EEH will return diff --git a/include/asm-ppc64/io.h b/include/asm-powerpc/io.h similarity index 98% rename from include/asm-ppc64/io.h rename to include/asm-powerpc/io.h index 77fc07c3c6bd..48938d84d055 100644 --- a/include/asm-ppc64/io.h +++ b/include/asm-powerpc/io.h @@ -1,5 +1,5 @@ -#ifndef _PPC64_IO_H -#define _PPC64_IO_H +#ifndef _ASM_POWERPC_IO_H +#define _ASM_POWERPC_IO_H /* * This program is free software; you can redistribute it and/or @@ -8,7 +8,10 @@ * 2 of the License, or (at your option) any later version. */ -#include +#ifndef CONFIG_PPC64 +#include +#else + #include #include #include @@ -455,4 +458,5 @@ extern int check_legacy_ioport(unsigned long base_port); #endif /* __KERNEL__ */ -#endif /* _PPC64_IO_H */ +#endif /* CONFIG_PPC64 */ +#endif /* _ASM_POWERPC_IO_H */ diff --git a/include/asm-ppc64/mmu.h b/include/asm-powerpc/mmu.h similarity index 98% rename from include/asm-ppc64/mmu.h rename to include/asm-powerpc/mmu.h index 1a7e0afa2dc6..c1b4bbabbe97 100644 --- a/include/asm-ppc64/mmu.h +++ b/include/asm-powerpc/mmu.h @@ -1,3 +1,10 @@ +#ifndef _ASM_POWERPC_MMU_H_ +#define _ASM_POWERPC_MMU_H_ + +#ifndef CONFIG_PPC64 +#include +#else + /* * PowerPC memory management structures * @@ -10,10 +17,6 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _PPC64_MMU_H_ -#define _PPC64_MMU_H_ - -#include #include #include @@ -392,4 +395,5 @@ static inline unsigned long get_vsid(unsigned long context, unsigned long ea) #endif /* __ASSEMBLY */ -#endif /* _PPC64_MMU_H_ */ +#endif /* CONFIG_PPC64 */ +#endif /* _ASM_POWERPC_MMU_H_ */ diff --git a/include/asm-ppc64/mmu_context.h b/include/asm-powerpc/mmu_context.h similarity index 91% rename from include/asm-ppc64/mmu_context.h rename to include/asm-powerpc/mmu_context.h index 4f512e9fa6b8..ea6798c7d5fc 100644 --- a/include/asm-ppc64/mmu_context.h +++ b/include/asm-powerpc/mmu_context.h @@ -1,7 +1,10 @@ -#ifndef __PPC64_MMU_CONTEXT_H -#define __PPC64_MMU_CONTEXT_H +#ifndef __ASM_POWERPC_MMU_CONTEXT_H +#define __ASM_POWERPC_MMU_CONTEXT_H + +#ifndef CONFIG_PPC64 +#include +#else -#include #include #include #include @@ -82,4 +85,5 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) local_irq_restore(flags); } -#endif /* __PPC64_MMU_CONTEXT_H */ +#endif /* CONFIG_PPC64 */ +#endif /* __ASM_POWERPC_MMU_CONTEXT_H */ diff --git a/include/asm-ppc64/mmzone.h b/include/asm-powerpc/mmzone.h similarity index 100% rename from include/asm-ppc64/mmzone.h rename to include/asm-powerpc/mmzone.h diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index c16f106b5373..1e6e7846824f 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -86,7 +86,11 @@ static inline void copy_page(void *to, void *from) extern u64 ppc64_pft_size; /* Large pages size */ +#ifdef CONFIG_HUGETLB_PAGE extern unsigned int HPAGE_SHIFT; +#else +#define HPAGE_SHIFT PAGE_SHIFT +#endif #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) diff --git a/include/asm-ppc64/pci-bridge.h b/include/asm-powerpc/pci-bridge.h similarity index 89% rename from include/asm-ppc64/pci-bridge.h rename to include/asm-powerpc/pci-bridge.h index efbdaece0cf0..223ec7bd81da 100644 --- a/include/asm-ppc64/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -1,8 +1,10 @@ -#ifdef __KERNEL__ -#ifndef _ASM_PCI_BRIDGE_H -#define _ASM_PCI_BRIDGE_H +#ifndef _ASM_POWERPC_PCI_BRIDGE_H +#define _ASM_POWERPC_PCI_BRIDGE_H + +#ifndef CONFIG_PPC64 +#include +#else -#include #include #include @@ -61,12 +63,14 @@ struct pci_dn { int busno; /* for pci devices */ int bussubno; /* for pci devices */ int devfn; /* for pci devices */ + +#ifdef CONFIG_PPC_PSERIES int eeh_mode; /* See eeh.h for possible EEH_MODEs */ int eeh_config_addr; int eeh_check_count; /* # times driver ignored error */ int eeh_freeze_count; /* # times this device froze up. */ int eeh_is_bridge; /* device is pci-to-pci bridge */ - +#endif int pci_ext_config_space; /* for pci devices */ struct pci_controller *phb; /* for pci devices */ struct iommu_table *iommu_table; /* for phb's or bridges */ @@ -74,9 +78,9 @@ struct pci_dn { struct device_node *node; /* back-pointer to the device_node */ #ifdef CONFIG_PPC_ISERIES struct list_head Device_List; - int Irq; /* Assigned IRQ */ - int Flags; /* Possible flags(disable/bist)*/ - u8 LogicalSlot; /* Hv Slot Index for Tces */ + int Irq; /* Assigned IRQ */ + int Flags; /* Possible flags(disable/bist)*/ + u8 LogicalSlot; /* Hv Slot Index for Tces */ #endif u32 config_space[16]; /* saved PCI config space */ }; @@ -136,10 +140,14 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) return PCI_DN(busdn)->phb; } +extern struct pci_controller * +pcibios_alloc_controller(struct device_node *dev); +extern void pcibios_free_controller(struct pci_controller *phb); + /* Return values for ppc_md.pci_probe_mode function */ #define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ #define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ #define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ +#endif /* CONFIG_PPC64 */ #endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc64/pci.h b/include/asm-powerpc/pci.h similarity index 63% rename from include/asm-ppc64/pci.h rename to include/asm-powerpc/pci.h index fafdf885a3cc..d5934a076bd0 100644 --- a/include/asm-ppc64/pci.h +++ b/include/asm-powerpc/pci.h @@ -1,5 +1,5 @@ -#ifndef __PPC64_PCI_H -#define __PPC64_PCI_H +#ifndef __ASM_POWERPC_PCI_H +#define __ASM_POWERPC_PCI_H #ifdef __KERNEL__ /* @@ -18,6 +18,7 @@ #include #include #include +#include #include @@ -26,11 +27,21 @@ struct pci_dev; -#ifdef CONFIG_PPC_ISERIES +/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +/* + * Set this to 1 if you want the kernel to re-assign all PCI + * bus numbers + */ +extern int pci_assign_all_buses; +#define pcibios_assign_all_busses() (pci_assign_all_buses) + #define pcibios_scan_all_fns(a, b) 0 -#else -extern int pcibios_scan_all_fns(struct pci_bus *bus, int devfn); -#endif static inline void pcibios_set_master(struct pci_dev *dev) { @@ -50,6 +61,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#ifdef CONFIG_PPC64 #define HAVE_ARCH_PCI_MWI 1 static inline int pcibios_prep_mwi(struct pci_dev *dev) { @@ -64,12 +76,10 @@ static inline int pcibios_prep_mwi(struct pci_dev *dev) return 0; } -extern unsigned int pcibios_assign_all_busses(void); - extern struct dma_mapping_ops pci_dma_ops; /* For DAC DMA, we currently don't support it by default, but - * we let the platform override this + * we let 64-bit platforms override this. */ static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask) { @@ -102,6 +112,35 @@ extern int pci_domain_nr(struct pci_bus *bus); /* Decide whether to display the domain number in /proc */ extern int pci_proc_domain(struct pci_bus *bus); +#else /* 32-bit */ + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* + * At present there are very few 32-bit PPC machines that can have + * memory above the 4GB point, and we don't support that. + */ +#define pci_dac_dma_supported(pci_dev, mask) (0) + +/* Return the index of the PCI controller for device PDEV. */ +#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index + +/* Set the name of the bus as it appears in /proc/bus/pci */ +static inline int pci_proc_domain(struct pci_bus *bus) +{ + return 0; +} + +#endif /* CONFIG_PPC64 */ + struct vm_area_struct; /* Map a range of PCI memory or I/O space for a device into user space */ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, @@ -110,6 +149,7 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ #define HAVE_PCI_MMAP 1 +#ifdef CONFIG_PPC64 /* pci_unmap_{single,page} is not a nop, thus... */ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; @@ -124,22 +164,40 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ (((PTR)->LEN_NAME) = (VAL)) -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use +/* The PCI address space does not equal the physical memory address + * space (we have an IOMMU). The IDE and SCSI device layers use * this boolean for bounce buffer decisions. */ #define PCI_DMA_BUS_IS_PHYS (0) + +#else /* 32-bit */ + +/* The PCI address space does equal the physical memory + * address space (no IOMMU). The IDE and SCSI device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_PPC64 */ -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, +extern void pcibios_bus_to_resource(struct pci_dev *dev, + struct resource *res, struct pci_bus_region *region); -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) +static inline struct resource *pcibios_select_root(struct pci_dev *pdev, + struct resource *res) { struct resource *root = NULL; @@ -151,14 +209,12 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res) return root; } -extern int -unmap_bus_range(struct pci_bus *bus); +extern int unmap_bus_range(struct pci_bus *bus); -extern int -remap_bus_range(struct pci_bus *bus); +extern int remap_bus_range(struct pci_bus *bus); -extern void -pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus); +extern void pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); @@ -180,14 +236,12 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file, unsigned long size, pgprot_t prot); -#ifdef CONFIG_PPC_MULTIPLATFORM +#if defined(CONFIG_PPC_MULTIPLATFORM) || defined(CONFIG_PPC32) #define HAVE_ARCH_PCI_RESOURCE_TO_USER extern void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, u64 *start, u64 *end); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - +#endif /* CONFIG_PPC_MULTIPLATFORM || CONFIG_PPC32 */ #endif /* __KERNEL__ */ - -#endif /* __PPC64_PCI_H */ +#endif /* __ASM_POWERPC_PCI_H */ diff --git a/include/asm-ppc64/pgalloc.h b/include/asm-powerpc/pgalloc.h similarity index 95% rename from include/asm-ppc64/pgalloc.h rename to include/asm-powerpc/pgalloc.h index dcf3622d1946..bfc2113b3630 100644 --- a/include/asm-ppc64/pgalloc.h +++ b/include/asm-powerpc/pgalloc.h @@ -1,5 +1,9 @@ -#ifndef _PPC64_PGALLOC_H -#define _PPC64_PGALLOC_H +#ifndef _ASM_POWERPC_PGALLOC_H +#define _ASM_POWERPC_PGALLOC_H + +#ifndef CONFIG_PPC64 +#include +#else #include #include @@ -148,4 +152,5 @@ extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); #define check_pgt_cache() do { } while (0) -#endif /* _PPC64_PGALLOC_H */ +#endif /* CONFIG_PPC64 */ +#endif /* _ASM_POWERPC_PGALLOC_H */ diff --git a/include/asm-ppc64/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h similarity index 100% rename from include/asm-ppc64/pgtable-4k.h rename to include/asm-powerpc/pgtable-4k.h diff --git a/include/asm-ppc64/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h similarity index 100% rename from include/asm-ppc64/pgtable-64k.h rename to include/asm-powerpc/pgtable-64k.h diff --git a/include/asm-ppc64/pgtable.h b/include/asm-powerpc/pgtable.h similarity index 97% rename from include/asm-ppc64/pgtable.h rename to include/asm-powerpc/pgtable.h index a9783ba7fe98..0303f57366c1 100644 --- a/include/asm-ppc64/pgtable.h +++ b/include/asm-powerpc/pgtable.h @@ -1,5 +1,9 @@ -#ifndef _PPC64_PGTABLE_H -#define _PPC64_PGTABLE_H +#ifndef _ASM_POWERPC_PGTABLE_H +#define _ASM_POWERPC_PGTABLE_H + +#ifndef CONFIG_PPC64 +#include +#else /* * This file contains the functions and defines necessary to modify and use @@ -46,6 +50,13 @@ struct mm_struct; #define VMALLOC_SIZE (0x80000000000UL) #define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) +/* + * Define the address range of the imalloc VM area. + */ +#define PHBS_IO_BASE VMALLOC_END +#define IMALLOC_BASE (PHBS_IO_BASE + 0x80000000ul) /* Reserve 2 gigs for PHBs */ +#define IMALLOC_END (VMALLOC_START + PGTABLE_RANGE) + /* * Common bits in a linux-style PTE. These match the bits in the * (hardware-defined) PowerPC PTE as closely as possible. Additional @@ -69,7 +80,7 @@ struct mm_struct; #define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) -/* __pgprot defined in asm-ppc64/page.h */ +/* __pgprot defined in asm-powerpc/page.h */ #define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) #define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) @@ -509,4 +520,5 @@ void pgtable_cache_init(void); #endif /* __ASSEMBLY__ */ -#endif /* _PPC64_PGTABLE_H */ +#endif /* CONFIG_PPC64 */ +#endif /* _ASM_POWERPC_PGTABLE_H */ diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index 9896fade98a7..36cdc869e580 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -14,7 +14,6 @@ extern unsigned long isa_io_base; -extern void pci_setup_pci_controller(struct pci_controller *hose); extern void pci_setup_phb_io(struct pci_controller *hose, int primary); extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary); @@ -49,8 +48,6 @@ extern void pSeries_final_fixup(void); extern void pSeries_irq_bus_setup(struct pci_bus *bus); extern unsigned long pci_probe_only; -extern unsigned long pci_assign_all_buses; -extern int pci_read_irq_line(struct pci_dev *pci_dev); /* ---- EEH internal-use-only related routines ---- */ #ifdef CONFIG_EEH diff --git a/include/asm-ppc64/spinlock.h b/include/asm-powerpc/spinlock.h similarity index 80% rename from include/asm-ppc64/spinlock.h rename to include/asm-powerpc/spinlock.h index 7d84fb5e39f1..caa4b14e0e94 100644 --- a/include/asm-ppc64/spinlock.h +++ b/include/asm-powerpc/spinlock.h @@ -18,31 +18,41 @@ * * (the type definitions are in asm/spinlock_types.h) */ -#include +#ifdef CONFIG_PPC64 #include #include #include +#endif +#include +#include #define __raw_spin_is_locked(x) ((x)->slock != 0) +#ifdef CONFIG_PPC64 +/* use 0x800000yy when locked, where yy == CPU number */ +#define LOCK_TOKEN (*(u32 *)(&get_paca()->lock_token)) +#else +#define LOCK_TOKEN 1 +#endif + /* * This returns the old value in the lock, so we succeeded * in getting the lock if the return value is 0. */ static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock) { - unsigned long tmp, tmp2; + unsigned long tmp, token; + token = LOCK_TOKEN; __asm__ __volatile__( -" lwz %1,%3(13) # __spin_trylock\n\ -1: lwarx %0,0,%2\n\ +"1: lwarx %0,0,%2 # __spin_trylock\n\ cmpwi 0,%0,0\n\ bne- 2f\n\ stwcx. %1,0,%2\n\ bne- 1b\n\ isync\n\ -2:" : "=&r" (tmp), "=&r" (tmp2) - : "r" (&lock->slock), "i" (offsetof(struct paca_struct, lock_token)) +2:" : "=&r" (tmp) + : "r" (token), "r" (&lock->slock) : "cr0", "memory"); return tmp; @@ -113,11 +123,17 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) { - __asm__ __volatile__("lwsync # __raw_spin_unlock": : :"memory"); + __asm__ __volatile__(SYNC_ON_SMP" # __raw_spin_unlock" + : : :"memory"); lock->slock = 0; } +#ifdef CONFIG_PPC64 extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); +#else +#define __raw_spin_unlock_wait(lock) \ + do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) +#endif /* * Read-write spinlocks, allowing multiple readers @@ -133,6 +149,14 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); #define __raw_read_can_lock(rw) ((rw)->lock >= 0) #define __raw_write_can_lock(rw) (!(rw)->lock) +#ifdef CONFIG_PPC64 +#define __DO_SIGN_EXTEND "extsw %0,%0\n" +#define WRLOCK_TOKEN LOCK_TOKEN /* it's negative */ +#else +#define __DO_SIGN_EXTEND +#define WRLOCK_TOKEN (-1) +#endif + /* * This returns the old value in the lock + 1, * so we got a read lock if the return value is > 0. @@ -142,11 +166,12 @@ static long __inline__ __read_trylock(raw_rwlock_t *rw) long tmp; __asm__ __volatile__( -"1: lwarx %0,0,%1 # read_trylock\n\ - extsw %0,%0\n\ - addic. %0,%0,1\n\ - ble- 2f\n\ - stwcx. %0,0,%1\n\ +"1: lwarx %0,0,%1 # read_trylock\n" + __DO_SIGN_EXTEND +" addic. %0,%0,1\n\ + ble- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ bne- 1b\n\ isync\n\ 2:" : "=&r" (tmp) @@ -162,18 +187,19 @@ static long __inline__ __read_trylock(raw_rwlock_t *rw) */ static __inline__ long __write_trylock(raw_rwlock_t *rw) { - long tmp, tmp2; + long tmp, token; + token = WRLOCK_TOKEN; __asm__ __volatile__( -" lwz %1,%3(13) # write_trylock\n\ -1: lwarx %0,0,%2\n\ +"1: lwarx %0,0,%2 # write_trylock\n\ cmpwi 0,%0,0\n\ - bne- 2f\n\ - stwcx. %1,0,%2\n\ + bne- 2f\n" + PPC405_ERR77(0,%1) +" stwcx. %1,0,%2\n\ bne- 1b\n\ isync\n\ -2:" : "=&r" (tmp), "=&r" (tmp2) - : "r" (&rw->lock), "i" (offsetof(struct paca_struct, lock_token)) +2:" : "=&r" (tmp) + : "r" (token), "r" (&rw->lock) : "cr0", "memory"); return tmp; @@ -224,8 +250,9 @@ static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) __asm__ __volatile__( "eieio # read_unlock\n\ 1: lwarx %0,0,%1\n\ - addic %0,%0,-1\n\ - stwcx. %0,0,%1\n\ + addic %0,%0,-1\n" + PPC405_ERR77(0,%1) +" stwcx. %0,0,%1\n\ bne- 1b" : "=&r"(tmp) : "r"(&rw->lock) @@ -234,7 +261,8 @@ static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) static __inline__ void __raw_write_unlock(raw_rwlock_t *rw) { - __asm__ __volatile__("lwsync # write_unlock": : :"memory"); + __asm__ __volatile__(SYNC_ON_SMP" # write_unlock" + : : :"memory"); rw->lock = 0; } diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 015d28746e1b..db8095cbe09b 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -41,6 +41,10 @@ static inline int node_to_first_cpu(int node) .cache_hot_time = (10*1000000), \ .cache_nice_tries = 1, \ .per_cpu_gain = 100, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h index 85d8a7be25c4..b9f9118b1607 100644 --- a/include/asm-powerpc/vdso.h +++ b/include/asm-powerpc/vdso.h @@ -11,7 +11,7 @@ #define VDSO32_MBASE VDSO32_LBASE #define VDSO64_MBASE VDSO64_LBASE -#define VDSO_VERSION_STRING LINUX_2.6.12 +#define VDSO_VERSION_STRING LINUX_2.6.15 /* Define if 64 bits VDSO has procedure descriptors */ #undef VDS64_HAS_DESCRIPTORS diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index 43d2ebbc7748..b638b87cebe3 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -1091,5 +1091,7 @@ typedef struct im_idma { #define CPM_IMMR_OFFSET 0x101a8 #endif +#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ + #endif /* __CPM2__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 2bfdf9c98459..84ac6e258eef 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -545,6 +545,23 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *); #include #endif +#ifdef CONFIG_NOT_COHERENT_CACHE + +#define dma_cache_inv(_start,_size) \ + invalidate_dcache_range(_start, (_start + _size)) +#define dma_cache_wback(_start,_size) \ + clean_dcache_range(_start, (_start + _size)) +#define dma_cache_wback_inv(_start,_size) \ + flush_dcache_range(_start, (_start + _size)) + +#else + +#define dma_cache_inv(_start,_size) do { } while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { } while (0) + +#endif + /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem * access diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h index 931b6de7ef53..bdefd1c4a558 100644 --- a/include/asm-ppc/pgalloc.h +++ b/include/asm-ppc/pgalloc.h @@ -28,7 +28,7 @@ extern void pgd_free(pgd_t *pgd); #define pmd_populate_kernel(mm, pmd, pte) \ (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) #define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT) + (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) #endif extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); diff --git a/include/asm-ppc64/dma-mapping.h b/include/asm-ppc64/dma-mapping.h deleted file mode 100644 index fb68fa23bea8..000000000000 --- a/include/asm-ppc64/dma-mapping.h +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright (C) 2004 IBM - * - * Implements the generic device dma API for ppc64. Handles - * the pci and vio busses - */ - -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include -#include -/* need struct page definitions */ -#include -#include -#include - -#define DMA_ERROR_CODE (~(dma_addr_t)0x0) - -extern int dma_supported(struct device *dev, u64 mask); -extern int dma_set_mask(struct device *dev, u64 dma_mask); -extern void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); -extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle); -extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, - size_t size, enum dma_data_direction direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction); - -static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline int dma_mapping_error(dma_addr_t dma_addr) -{ - return (dma_addr == DMA_ERROR_CODE); -} - -/* Now for the API extensions over the pci_ one */ - -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_is_consistent(d) (1) - -static inline int -dma_get_cache_alignment(void) -{ - /* no easy way to get cache size on all processors, so return - * the maximum possible, to be safe */ - return (1 << L1_CACHE_SHIFT_MAX); -} - -static inline void -dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline void -dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -static inline void -dma_cache_sync(void *vaddr, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - /* nothing to do */ -} - -/* - * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO - */ -struct dma_mapping_ops { - void * (*alloc_coherent)(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - void (*free_coherent)(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction); - void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); - int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); - int (*dma_supported)(struct device *dev, u64 mask); - int (*dac_dma_supported)(struct device *dev, u64 mask); -}; - -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/include/asm-ppc64/imalloc.h b/include/asm-ppc64/imalloc.h deleted file mode 100644 index 42adf7033a81..000000000000 --- a/include/asm-ppc64/imalloc.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _PPC64_IMALLOC_H -#define _PPC64_IMALLOC_H - -/* - * Define the address range of the imalloc VM area. - */ -#define PHBS_IO_BASE VMALLOC_END -#define IMALLOC_BASE (PHBS_IO_BASE + 0x80000000ul) /* Reserve 2 gigs for PHBs */ -#define IMALLOC_END (VMALLOC_START + PGTABLE_RANGE) - - -/* imalloc region types */ -#define IM_REGION_UNUSED 0x1 -#define IM_REGION_SUBSET 0x2 -#define IM_REGION_EXISTS 0x4 -#define IM_REGION_OVERLAP 0x8 -#define IM_REGION_SUPERSET 0x10 - -extern struct vm_struct * im_get_free_area(unsigned long size); -extern struct vm_struct * im_get_area(unsigned long v_addr, unsigned long size, - int region_type); -extern void im_free(void *addr); - -extern unsigned long ioremap_bot; - -#endif /* _PPC64_IMALLOC_H */ diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h index 424d5e622b43..6e27f42e3a57 100644 --- a/include/linux/cciss_ioctl.h +++ b/include/linux/cciss_ioctl.h @@ -10,8 +10,8 @@ typedef struct _cciss_pci_info_struct { unsigned char bus; - unsigned short domain; unsigned char dev_fn; + unsigned short domain; __u32 board_id; } cciss_pci_info_struct; diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h index 174f3379e5d9..119f9d064cc6 100644 --- a/include/linux/compat_ioctl.h +++ b/include/linux/compat_ioctl.h @@ -795,3 +795,70 @@ COMPATIBLE_IOCTL(HIDIOCGFLAG) COMPATIBLE_IOCTL(HIDIOCSFLAG) COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINDEX) COMPATIBLE_IOCTL(HIDIOCGCOLLECTIONINFO) +/* dvb */ +COMPATIBLE_IOCTL(AUDIO_STOP) +COMPATIBLE_IOCTL(AUDIO_PLAY) +COMPATIBLE_IOCTL(AUDIO_PAUSE) +COMPATIBLE_IOCTL(AUDIO_CONTINUE) +COMPATIBLE_IOCTL(AUDIO_SELECT_SOURCE) +COMPATIBLE_IOCTL(AUDIO_SET_MUTE) +COMPATIBLE_IOCTL(AUDIO_SET_AV_SYNC) +COMPATIBLE_IOCTL(AUDIO_SET_BYPASS_MODE) +COMPATIBLE_IOCTL(AUDIO_CHANNEL_SELECT) +COMPATIBLE_IOCTL(AUDIO_GET_STATUS) +COMPATIBLE_IOCTL(AUDIO_GET_CAPABILITIES) +COMPATIBLE_IOCTL(AUDIO_CLEAR_BUFFER) +COMPATIBLE_IOCTL(AUDIO_SET_ID) +COMPATIBLE_IOCTL(AUDIO_SET_MIXER) +COMPATIBLE_IOCTL(AUDIO_SET_STREAMTYPE) +COMPATIBLE_IOCTL(AUDIO_SET_EXT_ID) +COMPATIBLE_IOCTL(AUDIO_SET_ATTRIBUTES) +COMPATIBLE_IOCTL(AUDIO_SET_KARAOKE) +COMPATIBLE_IOCTL(DMX_START) +COMPATIBLE_IOCTL(DMX_STOP) +COMPATIBLE_IOCTL(DMX_SET_FILTER) +COMPATIBLE_IOCTL(DMX_SET_PES_FILTER) +COMPATIBLE_IOCTL(DMX_SET_BUFFER_SIZE) +COMPATIBLE_IOCTL(DMX_GET_PES_PIDS) +COMPATIBLE_IOCTL(DMX_GET_CAPS) +COMPATIBLE_IOCTL(DMX_SET_SOURCE) +COMPATIBLE_IOCTL(DMX_GET_STC) +COMPATIBLE_IOCTL(FE_GET_INFO) +COMPATIBLE_IOCTL(FE_DISEQC_RESET_OVERLOAD) +COMPATIBLE_IOCTL(FE_DISEQC_SEND_MASTER_CMD) +COMPATIBLE_IOCTL(FE_DISEQC_RECV_SLAVE_REPLY) +COMPATIBLE_IOCTL(FE_DISEQC_SEND_BURST) +COMPATIBLE_IOCTL(FE_SET_TONE) +COMPATIBLE_IOCTL(FE_SET_VOLTAGE) +COMPATIBLE_IOCTL(FE_ENABLE_HIGH_LNB_VOLTAGE) +COMPATIBLE_IOCTL(FE_READ_STATUS) +COMPATIBLE_IOCTL(FE_READ_BER) +COMPATIBLE_IOCTL(FE_READ_SIGNAL_STRENGTH) +COMPATIBLE_IOCTL(FE_READ_SNR) +COMPATIBLE_IOCTL(FE_READ_UNCORRECTED_BLOCKS) +COMPATIBLE_IOCTL(FE_SET_FRONTEND) +COMPATIBLE_IOCTL(FE_GET_FRONTEND) +COMPATIBLE_IOCTL(FE_GET_EVENT) +COMPATIBLE_IOCTL(FE_DISHNETWORK_SEND_LEGACY_CMD) +COMPATIBLE_IOCTL(VIDEO_STOP) +COMPATIBLE_IOCTL(VIDEO_PLAY) +COMPATIBLE_IOCTL(VIDEO_FREEZE) +COMPATIBLE_IOCTL(VIDEO_CONTINUE) +COMPATIBLE_IOCTL(VIDEO_SELECT_SOURCE) +COMPATIBLE_IOCTL(VIDEO_SET_BLANK) +COMPATIBLE_IOCTL(VIDEO_GET_STATUS) +COMPATIBLE_IOCTL(VIDEO_SET_DISPLAY_FORMAT) +COMPATIBLE_IOCTL(VIDEO_FAST_FORWARD) +COMPATIBLE_IOCTL(VIDEO_SLOWMOTION) +COMPATIBLE_IOCTL(VIDEO_GET_CAPABILITIES) +COMPATIBLE_IOCTL(VIDEO_CLEAR_BUFFER) +COMPATIBLE_IOCTL(VIDEO_SET_ID) +COMPATIBLE_IOCTL(VIDEO_SET_STREAMTYPE) +COMPATIBLE_IOCTL(VIDEO_SET_FORMAT) +COMPATIBLE_IOCTL(VIDEO_SET_SYSTEM) +COMPATIBLE_IOCTL(VIDEO_SET_HIGHLIGHT) +COMPATIBLE_IOCTL(VIDEO_SET_SPU) +COMPATIBLE_IOCTL(VIDEO_GET_NAVI) +COMPATIBLE_IOCTL(VIDEO_SET_ATTRIBUTES) +COMPATIBLE_IOCTL(VIDEO_GET_SIZE) +COMPATIBLE_IOCTL(VIDEO_GET_FRAME_RATE) diff --git a/include/linux/ds17287rtc.h b/include/linux/ds17287rtc.h new file mode 100644 index 000000000000..c281ba42e28f --- /dev/null +++ b/include/linux/ds17287rtc.h @@ -0,0 +1,67 @@ +/* + * ds17287rtc.h - register definitions for the ds1728[57] RTC / CMOS RAM + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * (C) 2003 Guido Guenther + */ +#ifndef __LINUX_DS17287RTC_H +#define __LINUX_DS17287RTC_H + +#include /* get the user-level API */ +#include /* spinlock_t */ +#include + +/* Register A */ +#define DS_REGA_DV2 0x40 /* countdown chain */ +#define DS_REGA_DV1 0x20 /* oscillator enable */ +#define DS_REGA_DV0 0x10 /* bank select */ + +/* bank 1 registers */ +#define DS_B1_MODEL 0x40 /* model number byte */ +#define DS_B1_SN1 0x41 /* serial number byte 1 */ +#define DS_B1_SN2 0x42 /* serial number byte 2 */ +#define DS_B1_SN3 0x43 /* serial number byte 3 */ +#define DS_B1_SN4 0x44 /* serial number byte 4 */ +#define DS_B1_SN5 0x45 /* serial number byte 5 */ +#define DS_B1_SN6 0x46 /* serial number byte 6 */ +#define DS_B1_CRC 0x47 /* CRC byte */ +#define DS_B1_CENTURY 0x48 /* Century byte */ +#define DS_B1_DALARM 0x49 /* date alarm */ +#define DS_B1_XCTRL4A 0x4a /* extendec control register 4a */ +#define DS_B1_XCTRL4B 0x4b /* extendec control register 4b */ +#define DS_B1_RTCADDR2 0x4e /* rtc address 2 */ +#define DS_B1_RTCADDR3 0x4f /* rtc address 3 */ +#define DS_B1_RAMLSB 0x50 /* extended ram LSB */ +#define DS_B1_RAMMSB 0x51 /* extended ram MSB */ +#define DS_B1_RAMDPORT 0x53 /* extended ram data port */ + +/* register details */ +/* extended control register 4a */ +#define DS_XCTRL4A_VRT2 0x80 /* valid ram and time */ +#define DS_XCTRL4A_INCR 0x40 /* increment progress status */ +#define DS_XCTRL4A_BME 0x20 /* burst mode enable */ +#define DS_XCTRL4A_PAB 0x08 /* power active bar ctrl */ +#define DS_XCTRL4A_RF 0x04 /* ram clear flag */ +#define DS_XCTRL4A_WF 0x02 /* wake up alarm flag */ +#define DS_XCTRL4A_KF 0x01 /* kickstart flag */ + +/* interrupt causes */ +#define DS_XCTRL4A_IFS (DS_XCTRL4A_RF|DS_XCTRL4A_WF|DS_XCTRL4A_KF) + +/* extended control register 4b */ +#define DS_XCTRL4B_ABE 0x80 /* auxiliary battery enable */ +#define DS_XCTRL4B_E32K 0x40 /* enable 32.768 kHz Output */ +#define DS_XCTRL4B_CS 0x20 /* crystal select */ +#define DS_XCTRL4B_RCE 0x10 /* ram clear enable */ +#define DS_XCTRL4B_PRS 0x08 /* PAB resec select */ +#define DS_XCTRL4B_RIE 0x04 /* ram clear interrupt enable */ +#define DS_XCTRL4B_WFE 0x02 /* wake up alarm interrupt enable */ +#define DS_XCTRL4B_KFE 0x01 /* kickstart interrupt enable */ + +/* interrupt enable bits */ +#define DS_XCTRL4B_IFES (DS_XCTRL4B_RIE|DS_XCTRL4B_WFE|DS_XCTRL4B_KFE) + +#endif /* __LINUX_DS17287RTC_H */ diff --git a/include/linux/ds1742rtc.h b/include/linux/ds1742rtc.h new file mode 100644 index 000000000000..a83cdd1cafc9 --- /dev/null +++ b/include/linux/ds1742rtc.h @@ -0,0 +1,53 @@ +/* + * ds1742rtc.h - register definitions for the Real-Time-Clock / CMOS RAM + * + * Copyright (C) 1999-2001 Toshiba Corporation + * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) + * + * Permission is hereby granted to copy, modify and redistribute this code + * in terms of the GNU Library General Public License, Version 2 or later, + * at your option. + */ +#ifndef __LINUX_DS1742RTC_H +#define __LINUX_DS1742RTC_H + +#include + +#define RTC_BRAM_SIZE 0x800 +#define RTC_OFFSET 0x7f8 + +/* + * Register summary + */ +#define RTC_CONTROL (RTC_OFFSET + 0) +#define RTC_CENTURY (RTC_OFFSET + 0) +#define RTC_SECONDS (RTC_OFFSET + 1) +#define RTC_MINUTES (RTC_OFFSET + 2) +#define RTC_HOURS (RTC_OFFSET + 3) +#define RTC_DAY (RTC_OFFSET + 4) +#define RTC_DATE (RTC_OFFSET + 5) +#define RTC_MONTH (RTC_OFFSET + 6) +#define RTC_YEAR (RTC_OFFSET + 7) + +#define RTC_CENTURY_MASK 0x3f +#define RTC_SECONDS_MASK 0x7f +#define RTC_DAY_MASK 0x07 + +/* + * Bits in the Control/Century register + */ +#define RTC_WRITE 0x80 +#define RTC_READ 0x40 + +/* + * Bits in the Seconds register + */ +#define RTC_STOP 0x80 + +/* + * Bits in the Day register + */ +#define RTC_BATT_FLAG 0x80 +#define RTC_FREQ_TEST 0x40 + +#endif /* __LINUX_DS1742RTC_H */ diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index b5d660089de4..2b54eac738ea 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -80,10 +80,12 @@ /* * Define standard taskfile in/out register */ -#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE #define IDE_TASKFILE_STD_IN_FLAGS 0xFE -#define IDE_HOB_STD_OUT_FLAGS 0x3C #define IDE_HOB_STD_IN_FLAGS 0x3C +#ifndef __KERNEL__ +#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE +#define IDE_HOB_STD_OUT_FLAGS 0x3C +#endif typedef unsigned char task_ioreg_t; typedef unsigned long sata_ioreg_t; diff --git a/include/linux/ide.h b/include/linux/ide.h index ac8b25fa6506..a39c3c59789d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1089,9 +1089,11 @@ enum { /* * Subdrivers support. + * + * The gendriver.owner field should be set to the module owner of this driver. + * The gendriver.name field should be set to the name of this driver */ typedef struct ide_driver_s { - struct module *owner; const char *version; u8 media; unsigned supports_dsc_overlap : 1; @@ -1199,37 +1201,11 @@ extern u64 ide_get_error_location(ide_drive_t *, char *); */ typedef enum { ide_wait, /* insert rq at end of list, and wait for it */ - ide_next, /* insert rq immediately after current request */ ide_preempt, /* insert rq in front of current request */ ide_head_wait, /* insert rq in front of current request and wait for it */ ide_end /* insert rq at end of list, but don't wait for it */ } ide_action_t; -/* - * This function issues a special IDE device request - * onto the request queue. - * - * If action is ide_wait, then the rq is queued at the end of the - * request queue, and the function sleeps until it has been processed. - * This is for use when invoked from an ioctl handler. - * - * If action is ide_preempt, then the rq is queued at the head of - * the request queue, displacing the currently-being-processed - * request and this function returns immediately without waiting - * for the new rq to be completed. This is VERY DANGEROUS, and is - * intended for careful use by the ATAPI tape/cdrom driver code. - * - * If action is ide_next, then the rq is queued immediately after - * the currently-being-processed-request (if any), and the function - * returns without waiting for the new rq to be completed. As above, - * This is VERY DANGEROUS, and is intended for careful use by the - * ATAPI tape/cdrom driver code. - * - * If action is ide_end, then the rq is queued at the end of the - * request queue, and the function returns immediately without waiting - * for the new rq to be completed. This is again intended for careful - * use by the ATAPI tape/cdrom driver code. - */ extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t); /* diff --git a/include/linux/mm.h b/include/linux/mm.h index 1013a42d10b1..0986d19be0b7 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -940,7 +940,9 @@ unsigned long max_sane_readahead(unsigned long nr); /* Do stack extension */ extern int expand_stack(struct vm_area_struct *vma, unsigned long address); +#ifdef CONFIG_IA64 extern int expand_upwards(struct vm_area_struct *vma, unsigned long address); +#endif /* Look up the first VMA which satisfies addr < vm_end, NULL if none. */ extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d4c1c8fd2925..efb60d06caab 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -620,6 +620,7 @@ #define PCI_DEVICE_ID_SI_961 0x0961 #define PCI_DEVICE_ID_SI_962 0x0962 #define PCI_DEVICE_ID_SI_963 0x0963 +#define PCI_DEVICE_ID_SI_965 0x0965 #define PCI_DEVICE_ID_SI_5511 0x5511 #define PCI_DEVICE_ID_SI_5513 0x5513 #define PCI_DEVICE_ID_SI_5518 0x5518 @@ -1234,6 +1235,7 @@ #define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 #define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 #define PCI_DEVICE_ID_VIA_XN266 0x3156 +#define PCI_DEVICE_ID_VIA_6410 0x3164 #define PCI_DEVICE_ID_VIA_8754C_0 0x3168 #define PCI_DEVICE_ID_VIA_8235 0x3177 #define PCI_DEVICE_ID_VIA_8385_0 0x3188 @@ -1401,6 +1403,7 @@ #define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 #define PCI_VENDOR_ID_MARVELL 0x11ab +#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 #define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h index b93fd8c1d884..cde2f4f4f501 100644 --- a/include/net/ieee80211.h +++ b/include/net/ieee80211.h @@ -1042,7 +1042,7 @@ static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr) case IEEE80211_4ADDR_LEN: return ((struct ieee80211_hdr_4addr *)hdr)->payload; } - + return NULL; } static inline int ieee80211_is_ofdm_rate(u8 rate) diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h index c7a959428b4f..8f6306581fa7 100644 --- a/include/net/llc_pdu.h +++ b/include/net/llc_pdu.h @@ -357,7 +357,7 @@ static inline void llc_pdu_init_as_test_rsp(struct sk_buff *skb, /* LLC Type 1 XID command/response information fields format */ struct llc_xid_info { - u8 fmt_id; /* always 0x18 for LLC */ + u8 fmt_id; /* always 0x81 for LLC */ u8 type; /* different if NULL/non-NULL LSAP */ u8 rw; /* sender receive window */ }; diff --git a/include/net/tcp.h b/include/net/tcp.h index 0f9848011972..d78025f9fbea 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -552,8 +552,8 @@ extern u32 __tcp_select_window(struct sock *sk); /* TCP timestamps are only 32-bits, this causes a slight * complication on 64-bit systems since we store a snapshot - * of jiffies in the buffer control blocks below. We decidedly - * only use of the low 32-bits of jiffies and hide the ugly + * of jiffies in the buffer control blocks below. We decided + * to use only the low 32-bits of jiffies and hide the ugly * casts with the following macro. */ #define tcp_time_stamp ((__u32)(jiffies)) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index eb6719c50b4e..88c28d476550 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -80,6 +80,7 @@ struct rcu_torture { struct rcu_head rtort_rcu; int rtort_pipe_count; struct list_head rtort_free; + int rtort_mbtest; }; static int fullstop = 0; /* stop generating callbacks at test end. */ @@ -96,6 +97,8 @@ static atomic_t rcu_torture_wcount[RCU_TORTURE_PIPE_LEN + 1]; atomic_t n_rcu_torture_alloc; atomic_t n_rcu_torture_alloc_fail; atomic_t n_rcu_torture_free; +atomic_t n_rcu_torture_mberror; +atomic_t n_rcu_torture_error; /* * Allocate an element from the rcu_tortures pool. @@ -145,9 +148,10 @@ rcu_torture_cb(struct rcu_head *p) if (i > RCU_TORTURE_PIPE_LEN) i = RCU_TORTURE_PIPE_LEN; atomic_inc(&rcu_torture_wcount[i]); - if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) + if (++rp->rtort_pipe_count >= RCU_TORTURE_PIPE_LEN) { + rp->rtort_mbtest = 0; rcu_torture_free(rp); - else + } else call_rcu(p, rcu_torture_cb); } @@ -206,6 +210,7 @@ rcu_torture_writer(void *arg) rp->rtort_pipe_count = 0; udelay(rcu_random(&rand) & 0x3ff); old_rp = rcu_torture_current; + rp->rtort_mbtest = 1; rcu_assign_pointer(rcu_torture_current, rp); smp_wmb(); if (old_rp != NULL) { @@ -252,6 +257,8 @@ rcu_torture_reader(void *arg) schedule_timeout_interruptible(HZ); continue; } + if (p->rtort_mbtest == 0) + atomic_inc(&n_rcu_torture_mberror); udelay(rcu_random(&rand) & 0x7f); preempt_disable(); pipe_count = p->rtort_pipe_count; @@ -300,16 +307,22 @@ rcu_torture_printk(char *page) } cnt += sprintf(&page[cnt], "rcutorture: "); cnt += sprintf(&page[cnt], - "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d", + "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d " + "rtmbe: %d", rcu_torture_current, rcu_torture_current_version, list_empty(&rcu_torture_freelist), atomic_read(&n_rcu_torture_alloc), atomic_read(&n_rcu_torture_alloc_fail), - atomic_read(&n_rcu_torture_free)); + atomic_read(&n_rcu_torture_free), + atomic_read(&n_rcu_torture_mberror)); + if (atomic_read(&n_rcu_torture_mberror) != 0) + cnt += sprintf(&page[cnt], " !!!"); cnt += sprintf(&page[cnt], "\nrcutorture: "); - if (i > 1) + if (i > 1) { cnt += sprintf(&page[cnt], "!!! "); + atomic_inc(&n_rcu_torture_error); + } cnt += sprintf(&page[cnt], "Reader Pipe: "); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) cnt += sprintf(&page[cnt], " %ld", pipesummary[i]); @@ -400,7 +413,9 @@ rcu_torture_cleanup(void) for (i = 0; i < RCU_TORTURE_PIPE_LEN; i++) synchronize_rcu(); rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ - PRINTK_STRING("--- End of test"); + printk(KERN_ALERT TORTURE_FLAG + "--- End of test: %s\n", + atomic_read(&n_rcu_torture_error) == 0 ? "SUCCESS" : "FAILURE"); } static int @@ -425,6 +440,7 @@ rcu_torture_init(void) INIT_LIST_HEAD(&rcu_torture_freelist); for (i = 0; i < sizeof(rcu_tortures) / sizeof(rcu_tortures[0]); i++) { + rcu_tortures[i].rtort_mbtest = 0; list_add_tail(&rcu_tortures[i].rtort_free, &rcu_torture_freelist); } @@ -436,6 +452,8 @@ rcu_torture_init(void) atomic_set(&n_rcu_torture_alloc, 0); atomic_set(&n_rcu_torture_alloc_fail, 0); atomic_set(&n_rcu_torture_free, 0); + atomic_set(&n_rcu_torture_mberror, 0); + atomic_set(&n_rcu_torture_error, 0); for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++) atomic_set(&rcu_torture_wcount[i], 0); for_each_cpu(cpu) { diff --git a/mm/mmap.c b/mm/mmap.c index 6c997b159600..4f8def03428c 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1501,7 +1501,7 @@ static int acct_stack_growth(struct vm_area_struct * vma, unsigned long size, un * PA-RISC uses this for its stack; IA64 for its Register Backing Store. * vma is the last one with address > vma->vm_end. Have to extend vma. */ -#ifdef CONFIG_STACK_GROWSUP +#ifndef CONFIG_IA64 static inline #endif int expand_upwards(struct vm_area_struct *vma, unsigned long address) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 74138c9a22b9..0166ea15c9ee 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -750,6 +750,7 @@ int clear_page_dirty_for_io(struct page *page) } return TestClearPageDirty(page); } +EXPORT_SYMBOL(clear_page_dirty_for_io); int test_clear_page_writeback(struct page *page) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 104e69ca55e0..bd4de592dc23 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -845,21 +845,22 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order, might_sleep_if(wait); +restart: z = zonelist->zones; /* the list of zones suitable for gfp_mask */ if (unlikely(*z == NULL)) { /* Should this ever happen?? */ return NULL; } -restart: + page = get_page_from_freelist(gfp_mask|__GFP_HARDWALL, order, zonelist, ALLOC_CPUSET); if (page) goto got_pg; - do + do { wakeup_kswapd(*z, order); - while (*(++z)); + } while (*(++z)); /* * OK, we're below the kswapd watermark and have kicked background diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index e7d26d9943c2..8ce0ce2ee48e 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -71,7 +71,7 @@ struct ipfrag_skb_cb /* Describe an entry in the "incomplete datagrams" queue. */ struct ipq { - struct ipq *next; /* linked list pointers */ + struct hlist_node list; struct list_head lru_list; /* lru list member */ u32 user; u32 saddr; @@ -89,7 +89,6 @@ struct ipq { spinlock_t lock; atomic_t refcnt; struct timer_list timer; /* when will this queue expire? */ - struct ipq **pprev; int iif; struct timeval stamp; }; @@ -99,7 +98,7 @@ struct ipq { #define IPQ_HASHSZ 64 /* Per-bucket lock is easy to add now. */ -static struct ipq *ipq_hash[IPQ_HASHSZ]; +static struct hlist_head ipq_hash[IPQ_HASHSZ]; static DEFINE_RWLOCK(ipfrag_lock); static u32 ipfrag_hash_rnd; static LIST_HEAD(ipq_lru_list); @@ -107,9 +106,7 @@ int ip_frag_nqueues = 0; static __inline__ void __ipq_unlink(struct ipq *qp) { - if(qp->next) - qp->next->pprev = qp->pprev; - *qp->pprev = qp->next; + hlist_del(&qp->list); list_del(&qp->lru_list); ip_frag_nqueues--; } @@ -139,27 +136,18 @@ static void ipfrag_secret_rebuild(unsigned long dummy) get_random_bytes(&ipfrag_hash_rnd, sizeof(u32)); for (i = 0; i < IPQ_HASHSZ; i++) { struct ipq *q; + struct hlist_node *p, *n; - q = ipq_hash[i]; - while (q) { - struct ipq *next = q->next; + hlist_for_each_entry_safe(q, p, n, &ipq_hash[i], list) { unsigned int hval = ipqhashfn(q->id, q->saddr, q->daddr, q->protocol); if (hval != i) { - /* Unlink. */ - if (q->next) - q->next->pprev = q->pprev; - *q->pprev = q->next; + hlist_del(&q->list); /* Relink to new hash chain. */ - if ((q->next = ipq_hash[hval]) != NULL) - q->next->pprev = &q->next; - ipq_hash[hval] = q; - q->pprev = &ipq_hash[hval]; + hlist_add_head(&q->list, &ipq_hash[hval]); } - - q = next; } } write_unlock(&ipfrag_lock); @@ -310,14 +298,16 @@ out: static struct ipq *ip_frag_intern(unsigned int hash, struct ipq *qp_in) { struct ipq *qp; - +#ifdef CONFIG_SMP + struct hlist_node *n; +#endif write_lock(&ipfrag_lock); #ifdef CONFIG_SMP /* With SMP race we have to recheck hash table, because * such entry could be created on other cpu, while we * promoted read lock to write lock. */ - for(qp = ipq_hash[hash]; qp; qp = qp->next) { + hlist_for_each_entry(qp, n, &ipq_hash[hash], list) { if(qp->id == qp_in->id && qp->saddr == qp_in->saddr && qp->daddr == qp_in->daddr && @@ -337,10 +327,7 @@ static struct ipq *ip_frag_intern(unsigned int hash, struct ipq *qp_in) atomic_inc(&qp->refcnt); atomic_inc(&qp->refcnt); - if((qp->next = ipq_hash[hash]) != NULL) - qp->next->pprev = &qp->next; - ipq_hash[hash] = qp; - qp->pprev = &ipq_hash[hash]; + hlist_add_head(&qp->list, &ipq_hash[hash]); INIT_LIST_HEAD(&qp->lru_list); list_add_tail(&qp->lru_list, &ipq_lru_list); ip_frag_nqueues++; @@ -392,9 +379,10 @@ static inline struct ipq *ip_find(struct iphdr *iph, u32 user) __u8 protocol = iph->protocol; unsigned int hash = ipqhashfn(id, saddr, daddr, protocol); struct ipq *qp; + struct hlist_node *n; read_lock(&ipfrag_lock); - for(qp = ipq_hash[hash]; qp; qp = qp->next) { + hlist_for_each_entry(qp, n, &ipq_hash[hash], list) { if(qp->id == id && qp->saddr == saddr && qp->daddr == daddr && diff --git a/net/ipv4/netfilter/ip_conntrack_ftp.c b/net/ipv4/netfilter/ip_conntrack_ftp.c index d77d6b3f5f80..59e12b02b22c 100644 --- a/net/ipv4/netfilter/ip_conntrack_ftp.c +++ b/net/ipv4/netfilter/ip_conntrack_ftp.c @@ -29,9 +29,9 @@ static char *ftp_buffer; static DEFINE_SPINLOCK(ip_ftp_lock); #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); static int loose; module_param(loose, int, 0600); diff --git a/net/ipv4/netfilter/ip_conntrack_irc.c b/net/ipv4/netfilter/ip_conntrack_irc.c index 15457415a4f3..2dea1db14406 100644 --- a/net/ipv4/netfilter/ip_conntrack_irc.c +++ b/net/ipv4/netfilter/ip_conntrack_irc.c @@ -34,7 +34,7 @@ #include #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; static int max_dcc_channels = 8; static unsigned int dcc_timeout = 300; @@ -52,7 +52,7 @@ EXPORT_SYMBOL_GPL(ip_nat_irc_hook); MODULE_AUTHOR("Harald Welte "); MODULE_DESCRIPTION("IRC (DCC) connection tracking helper"); MODULE_LICENSE("GPL"); -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); MODULE_PARM_DESC(ports, "port numbers of IRC servers"); module_param(max_dcc_channels, int, 0400); MODULE_PARM_DESC(max_dcc_channels, "max number of expected DCC channels per IRC session"); diff --git a/net/ipv4/netfilter/ip_conntrack_tftp.c b/net/ipv4/netfilter/ip_conntrack_tftp.c index a78736b8525d..d3c5a371f993 100644 --- a/net/ipv4/netfilter/ip_conntrack_tftp.c +++ b/net/ipv4/netfilter/ip_conntrack_tftp.c @@ -26,9 +26,9 @@ MODULE_DESCRIPTION("tftp connection tracking helper"); MODULE_LICENSE("GPL"); #define MAX_PORTS 8 -static short ports[MAX_PORTS]; +static unsigned short ports[MAX_PORTS]; static int ports_c; -module_param_array(ports, short, &ports_c, 0400); +module_param_array(ports, ushort, &ports_c, 0400); MODULE_PARM_DESC(ports, "port numbers of tftp servers"); #if 0 diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c index 82b3c189bd7d..63cf7e540847 100644 --- a/net/ipv4/tcp_highspeed.c +++ b/net/ipv4/tcp_highspeed.c @@ -111,7 +111,7 @@ static void hstcp_init(struct sock *sk) } static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt, - u32 in_flight, u32 pkts_acked) + u32 in_flight, int data_acked) { struct tcp_sock *tp = tcp_sk(sk); struct hstcp *ca = inet_csk_ca(sk); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 40a26b7157b4..bf2e23086bce 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -367,7 +367,7 @@ static void tcp_rcv_rtt_update(struct tcp_sock *tp, u32 sample, int win_dep) * are stalled on filesystem I/O. * * Also, since we are only going for a minimum in the - * non-timestamp case, we do not smoother things out + * non-timestamp case, we do not smooth things out * else with timestamps disabled convergence takes too * long. */ @@ -546,7 +546,7 @@ static void tcp_rtt_estimator(struct sock *sk, const __u32 mrtt) * * Funny. This algorithm seems to be very broken. * These formulae increase RTO, when it should be decreased, increase - * too slowly, when it should be increased fastly, decrease too fastly + * too slowly, when it should be increased quickly, decrease too quickly * etc. I guess in BSD RTO takes ONE value, so that it is absolutely * does not matter how to _calculate_ it. Seems, it was trap * that VJ failed to avoid. 8) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index ddcf7754eec2..56a09a4ac410 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1045,9 +1045,10 @@ int ipv6_dev_get_saddr(struct net_device *daddr_dev, } #endif /* Rule 8: Use longest matching prefix */ - if (hiscore.rule < 8) + if (hiscore.rule < 8) { hiscore.matchlen = ipv6_addr_diff(&ifa_result->addr, daddr); - score.rule++; + hiscore.rule++; + } score.matchlen = ipv6_addr_diff(&ifa->addr, daddr); if (score.matchlen > hiscore.matchlen) { score.rule = 8; diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 003fd99ff597..25757ade989f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -287,7 +287,7 @@ int ipv6_setsockopt(struct sock *sk, int level, int optname, { struct ipv6_txoptions *opt; if (optlen == 0) - optval = 0; + optval = NULL; /* hop-by-hop / destination options are privileged option */ retv = -EPERM; diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index e4fe9ee484dd..5d316cb72ec9 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -74,7 +74,7 @@ struct ip6frag_skb_cb struct frag_queue { - struct frag_queue *next; + struct hlist_node list; struct list_head lru_list; /* lru list member */ __u32 id; /* fragment id */ @@ -95,14 +95,13 @@ struct frag_queue #define FIRST_IN 2 #define LAST_IN 1 __u16 nhoffset; - struct frag_queue **pprev; }; /* Hash table. */ #define IP6Q_HASHSZ 64 -static struct frag_queue *ip6_frag_hash[IP6Q_HASHSZ]; +static struct hlist_head ip6_frag_hash[IP6Q_HASHSZ]; static DEFINE_RWLOCK(ip6_frag_lock); static u32 ip6_frag_hash_rnd; static LIST_HEAD(ip6_frag_lru_list); @@ -110,9 +109,7 @@ int ip6_frag_nqueues = 0; static __inline__ void __fq_unlink(struct frag_queue *fq) { - if(fq->next) - fq->next->pprev = fq->pprev; - *fq->pprev = fq->next; + hlist_del(&fq->list); list_del(&fq->lru_list); ip6_frag_nqueues--; } @@ -163,28 +160,21 @@ static void ip6_frag_secret_rebuild(unsigned long dummy) get_random_bytes(&ip6_frag_hash_rnd, sizeof(u32)); for (i = 0; i < IP6Q_HASHSZ; i++) { struct frag_queue *q; + struct hlist_node *p, *n; - q = ip6_frag_hash[i]; - while (q) { - struct frag_queue *next = q->next; + hlist_for_each_entry_safe(q, p, n, &ip6_frag_hash[i], list) { unsigned int hval = ip6qhashfn(q->id, &q->saddr, &q->daddr); if (hval != i) { - /* Unlink. */ - if (q->next) - q->next->pprev = q->pprev; - *q->pprev = q->next; + hlist_del(&q->list); /* Relink to new hash chain. */ - if ((q->next = ip6_frag_hash[hval]) != NULL) - q->next->pprev = &q->next; - ip6_frag_hash[hval] = q; - q->pprev = &ip6_frag_hash[hval]; - } + hlist_add_head(&q->list, + &ip6_frag_hash[hval]); - q = next; + } } } write_unlock(&ip6_frag_lock); @@ -337,10 +327,13 @@ static struct frag_queue *ip6_frag_intern(unsigned int hash, struct frag_queue *fq_in) { struct frag_queue *fq; +#ifdef CONFIG_SMP + struct hlist_node *n; +#endif write_lock(&ip6_frag_lock); #ifdef CONFIG_SMP - for (fq = ip6_frag_hash[hash]; fq; fq = fq->next) { + hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) { if (fq->id == fq_in->id && ipv6_addr_equal(&fq_in->saddr, &fq->saddr) && ipv6_addr_equal(&fq_in->daddr, &fq->daddr)) { @@ -358,10 +351,7 @@ static struct frag_queue *ip6_frag_intern(unsigned int hash, atomic_inc(&fq->refcnt); atomic_inc(&fq->refcnt); - if((fq->next = ip6_frag_hash[hash]) != NULL) - fq->next->pprev = &fq->next; - ip6_frag_hash[hash] = fq; - fq->pprev = &ip6_frag_hash[hash]; + hlist_add_head(&fq->list, &ip6_frag_hash[hash]); INIT_LIST_HEAD(&fq->lru_list); list_add_tail(&fq->lru_list, &ip6_frag_lru_list); ip6_frag_nqueues++; @@ -401,10 +391,11 @@ static __inline__ struct frag_queue * fq_find(u32 id, struct in6_addr *src, struct in6_addr *dst) { struct frag_queue *fq; + struct hlist_node *n; unsigned int hash = ip6qhashfn(id, src, dst); read_lock(&ip6_frag_lock); - for(fq = ip6_frag_hash[hash]; fq; fq = fq->next) { + hlist_for_each_entry(fq, n, &ip6_frag_hash[hash], list) { if (fq->id == id && ipv6_addr_equal(src, &fq->saddr) && ipv6_addr_equal(dst, &fq->daddr)) { diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9a71a8d1078a..a7a537b50595 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1732,7 +1732,7 @@ int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb) /* * 2. allocate and initialize walker. */ - w = kmalloc(sizeof(*w), GFP_KERNEL); + w = kmalloc(sizeof(*w), GFP_ATOMIC); if (w == NULL) return -ENOMEM; RT6_TRACE("dump<%p", w); diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 59d02cbbeb9e..c3f0b0783453 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -116,7 +116,9 @@ static int llc_ui_send_data(struct sock* sk, struct sk_buff *skb, int noblock) struct llc_sock* llc = llc_sk(sk); int rc = 0; - if (unlikely(llc_data_accept_state(llc->state) || llc->p_flag)) { + if (unlikely(llc_data_accept_state(llc->state) || + llc->remote_busy_flag || + llc->p_flag)) { long timeout = sock_sndtimeo(sk, noblock); rc = llc_ui_wait_for_busy_core(sk, timeout); @@ -542,6 +544,7 @@ static int llc_ui_wait_for_busy_core(struct sock *sk, long timeout) if (sk_wait_event(sk, &timeout, (sk->sk_shutdown & RCV_SHUTDOWN) || (!llc_data_accept_state(llc->state) && + !llc->remote_busy_flag && !llc->p_flag))) break; rc = -ERESTARTSYS; diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c index b0bcfb1f12dd..8169f24ed33e 100644 --- a/net/llc/llc_c_ac.c +++ b/net/llc/llc_c_ac.c @@ -866,7 +866,8 @@ int llc_conn_ac_send_ack_if_needed(struct sock *sk, struct sk_buff *skb) llc->ack_must_be_send = 1; llc->ack_pf = pf_bit & 1; } - if (((llc->vR - llc->first_pdu_Ns + 129) % 128) >= llc->npta) { + if (((llc->vR - llc->first_pdu_Ns + 1 + LLC_2_SEQ_NBR_MODULO) + % LLC_2_SEQ_NBR_MODULO) >= llc->npta) { llc_conn_ac_send_rr_rsp_f_set_ackpf(sk, skb); llc->ack_must_be_send = 0; llc->ack_pf = 0; @@ -994,8 +995,8 @@ static int llc_conn_ac_inc_npta_value(struct sock *sk, struct sk_buff *skb) llc->dec_step = 0; llc->dec_cntr = llc->inc_cntr = 2; ++llc->npta; - if (llc->npta > 127) - llc->npta = 127 ; + if (llc->npta > (u8) ~LLC_2_SEQ_NBR_MODULO) + llc->npta = (u8) ~LLC_2_SEQ_NBR_MODULO; } else --llc->inc_cntr; return 0; @@ -1065,9 +1066,10 @@ int llc_conn_ac_dec_tx_win_size(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); u8 unacked_pdu = skb_queue_len(&llc->pdu_unack_q); - llc->k -= unacked_pdu; - if (llc->k < 2) - llc->k = 2; + if (llc->k - unacked_pdu < 1) + llc->k = 1; + else + llc->k -= unacked_pdu; return 0; } @@ -1084,8 +1086,8 @@ int llc_conn_ac_inc_tx_win_size(struct sock *sk, struct sk_buff *skb) struct llc_sock *llc = llc_sk(sk); llc->k += 1; - if (llc->k > 128) - llc->k = 128 ; + if (llc->k > (u8) ~LLC_2_SEQ_NBR_MODULO) + llc->k = (u8) ~LLC_2_SEQ_NBR_MODULO; return 0; } @@ -1309,7 +1311,7 @@ int llc_conn_ac_set_vs_nr(struct sock *sk, struct sk_buff *skb) static int llc_conn_ac_inc_vs_by_1(struct sock *sk, struct sk_buff *skb) { - llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % 128; + llc_sk(sk)->vS = (llc_sk(sk)->vS + 1) % LLC_2_SEQ_NBR_MODULO; return 0; } diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 9a67c796b385..1da678303d78 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -387,7 +387,7 @@ nf_ct_invert_tuple(struct nf_conntrack_tuple *inverse, static void nf_ct_unlink_expect(struct nf_conntrack_expect *exp) { ASSERT_WRITE_LOCK(&nf_conntrack_lock); - NF_CT_ASSERT(!timer_pending(&exp_timeout)); + NF_CT_ASSERT(!timer_pending(&exp->timeout)); list_del(&exp->list); NF_CT_STAT_INC(expect_delete); exp->master->expecting--; @@ -1395,6 +1395,13 @@ void nf_conntrack_cleanup(void) kmem_cache_destroy(nf_conntrack_expect_cachep); free_conntrack_hash(nf_conntrack_hash, nf_conntrack_vmalloc, nf_conntrack_htable_size); + + /* free l3proto protocol tables */ + for (i = 0; i < PF_MAX; i++) + if (nf_ct_protos[i]) { + kfree(nf_ct_protos[i]); + nf_ct_protos[i] = NULL; + } } static struct list_head *alloc_hashtable(int size, int *vmalloced) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 45224db4fe2f..5af381f9fe3d 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -694,7 +694,7 @@ static int init_or_cleanup(int init) cleanup_proc_stat: #endif #ifdef CONFIG_PROC_FS - proc_net_remove("nf_conntrack_stat"); + remove_proc_entry("nf_conntrack", proc_net_stat); cleanup_proc_exp: proc_net_remove("nf_conntrack_expect"); cleanup_proc: diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 7f34e7fd767c..55cd5327fbd7 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -40,9 +40,10 @@ config NET_SCHED The available schedulers are listed in the following questions; you can say Y to as many as you like. If unsure, say N now. +if NET_SCHED + choice prompt "Packet scheduler clock source" - depends on NET_SCHED default NET_SCH_CLK_JIFFIES ---help--- Packet schedulers need a monotonic clock that increments at a static @@ -98,11 +99,9 @@ config NET_SCH_CLK_CPU endchoice comment "Queueing/Scheduling" - depends on NET_SCHED config NET_SCH_CBQ tristate "Class Based Queueing (CBQ)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Class-Based Queueing (CBQ) packet scheduling algorithm. This algorithm classifies the waiting packets @@ -120,7 +119,6 @@ config NET_SCH_CBQ config NET_SCH_HTB tristate "Hierarchical Token Bucket (HTB)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Token Buckets (HTB) packet scheduling algorithm. See @@ -135,7 +133,6 @@ config NET_SCH_HTB config NET_SCH_HFSC tristate "Hierarchical Fair Service Curve (HFSC)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Hierarchical Fair Service Curve (HFSC) packet scheduling algorithm. @@ -145,7 +142,7 @@ config NET_SCH_HFSC config NET_SCH_ATM tristate "ATM Virtual Circuits (ATM)" - depends on NET_SCHED && ATM + depends on ATM ---help--- Say Y here if you want to use the ATM pseudo-scheduler. This provides a framework for invoking classifiers, which in turn @@ -159,7 +156,6 @@ config NET_SCH_ATM config NET_SCH_PRIO tristate "Multi Band Priority Queueing (PRIO)" - depends on NET_SCHED ---help--- Say Y here if you want to use an n-band priority queue packet scheduler. @@ -169,7 +165,6 @@ config NET_SCH_PRIO config NET_SCH_RED tristate "Random Early Detection (RED)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Random Early Detection (RED) packet scheduling algorithm. @@ -181,7 +176,6 @@ config NET_SCH_RED config NET_SCH_SFQ tristate "Stochastic Fairness Queueing (SFQ)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Stochastic Fairness Queueing (SFQ) packet scheduling algorithm . @@ -193,7 +187,6 @@ config NET_SCH_SFQ config NET_SCH_TEQL tristate "True Link Equalizer (TEQL)" - depends on NET_SCHED ---help--- Say Y here if you want to use the True Link Equalizer (TLE) packet scheduling algorithm. This queueing discipline allows the combination @@ -206,7 +199,6 @@ config NET_SCH_TEQL config NET_SCH_TBF tristate "Token Bucket Filter (TBF)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Token Bucket Filter (TBF) packet scheduling algorithm. @@ -218,7 +210,6 @@ config NET_SCH_TBF config NET_SCH_GRED tristate "Generic Random Early Detection (GRED)" - depends on NET_SCHED ---help--- Say Y here if you want to use the Generic Random Early Detection (GRED) packet scheduling algorithm for some of your network devices @@ -230,7 +221,6 @@ config NET_SCH_GRED config NET_SCH_DSMARK tristate "Differentiated Services marker (DSMARK)" - depends on NET_SCHED ---help--- Say Y if you want to schedule packets according to the Differentiated Services architecture proposed in RFC 2475. @@ -242,7 +232,6 @@ config NET_SCH_DSMARK config NET_SCH_NETEM tristate "Network emulator (NETEM)" - depends on NET_SCHED ---help--- Say Y if you want to emulate network delay, loss, and packet re-ordering. This is often useful to simulate networks when @@ -255,7 +244,6 @@ config NET_SCH_NETEM config NET_SCH_INGRESS tristate "Ingress Qdisc" - depends on NET_SCHED ---help--- Say Y here if you want to use classifiers for incoming packets. If unsure, say Y. @@ -264,14 +252,12 @@ config NET_SCH_INGRESS module will be called sch_ingress. comment "Classification" - depends on NET_SCHED config NET_CLS boolean config NET_CLS_BASIC tristate "Elementary classification (BASIC)" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to be able to classify packets using @@ -282,7 +268,6 @@ config NET_CLS_BASIC config NET_CLS_TCINDEX tristate "Traffic-Control Index (TCINDEX)" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to be able to classify packets based on @@ -294,7 +279,6 @@ config NET_CLS_TCINDEX config NET_CLS_ROUTE4 tristate "Routing decision (ROUTE)" - depends NET_SCHED select NET_CLS_ROUTE select NET_CLS ---help--- @@ -306,11 +290,9 @@ config NET_CLS_ROUTE4 config NET_CLS_ROUTE bool - default n config NET_CLS_FW tristate "Netfilter mark (FW)" - depends NET_SCHED select NET_CLS ---help--- If you say Y here, you will be able to classify packets @@ -321,7 +303,6 @@ config NET_CLS_FW config NET_CLS_U32 tristate "Universal 32bit comparisons w/ hashing (U32)" - depends NET_SCHED select NET_CLS ---help--- Say Y here to be able to classify packetes using a universal @@ -345,7 +326,6 @@ config CLS_U32_MARK config NET_CLS_RSVP tristate "IPv4 Resource Reservation Protocol (RSVP)" - depends on NET_SCHED select NET_CLS select NET_ESTIMATOR ---help--- @@ -361,7 +341,6 @@ config NET_CLS_RSVP config NET_CLS_RSVP6 tristate "IPv6 Resource Reservation Protocol (RSVP6)" - depends on NET_SCHED select NET_CLS select NET_ESTIMATOR ---help--- @@ -377,7 +356,6 @@ config NET_CLS_RSVP6 config NET_EMATCH bool "Extended Matches" - depends NET_SCHED select NET_CLS ---help--- Say Y here if you want to use extended matches on top of classifiers @@ -456,7 +434,7 @@ config NET_EMATCH_TEXT config NET_CLS_ACT bool "Actions" - depends on EXPERIMENTAL && NET_SCHED + depends on EXPERIMENTAL select NET_ESTIMATOR ---help--- Say Y here if you want to use traffic control actions. Actions @@ -539,7 +517,7 @@ config NET_ACT_SIMP config NET_CLS_POLICE bool "Traffic Policing (obsolete)" - depends on NET_SCHED && NET_CLS_ACT!=y + depends on NET_CLS_ACT!=y select NET_ESTIMATOR ---help--- Say Y here if you want to do traffic policing, i.e. strict @@ -549,7 +527,7 @@ config NET_CLS_POLICE config NET_CLS_IND bool "Incoming device classification" - depends on NET_SCHED && (NET_CLS_U32 || NET_CLS_FW) + depends on NET_CLS_U32 || NET_CLS_FW ---help--- Say Y here to extend the u32 and fw classifier to support classification based on the incoming device. This option is @@ -557,11 +535,12 @@ config NET_CLS_IND config NET_ESTIMATOR bool "Rate estimator" - depends on NET_SCHED ---help--- Say Y here to allow using rate estimators to estimate the current rate-of-flow for network devices, queues, etc. This module is automaticaly selected if needed but can be selected manually for statstical purposes. +endif # NET_SCHED + endmenu diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index 65384afcfc3f..d74bfabe5300 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -1194,8 +1194,14 @@ static void tumbler_resume(pmac_t *chip) tumbler_set_master_volume(mix); if (chip->update_automute) chip->update_automute(chip, 0); - if (mix->headphone_irq >= 0) + if (mix->headphone_irq >= 0) { + unsigned char val; + enable_irq(mix->headphone_irq); + /* activate headphone status interrupts */ + val = do_gpio_read(&mix->hp_detect); + do_gpio_write(&mix->hp_detect, val | 0x80); + } if (mix->lineout_irq >= 0) enable_irq(mix->lineout_irq); }