From 1f42db786b14a31bf807fc41ee5583a00c08fcb1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 14 Feb 2014 13:48:16 -0700 Subject: [PATCH] PCI: Enable INTx if BIOS left them disabled Some firmware leaves the Interrupt Disable bit set even if the device uses INTx interrupts. Clear Interrupt Disable so we get those interrupts. Based on the report mentioned below, if the user selects the "EHCI only" option in the Intel Baytrail BIOS, the EHCI device is handed off to the OS with the PCI_COMMAND_INTX_DISABLE bit set. Link: http://lkml.kernel.org/r/20140114181721.GC12126@xanatos Link: https://bugzilla.kernel.org/show_bug.cgi?id=70601 Reported-by: Chris Cheng Reported-and-tested-by: Jamie Chen Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org CC: Sarah Sharp --- drivers/pci/pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1febe90831b4..6b05f6134b68 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1181,6 +1181,8 @@ EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state); static int do_pci_enable_device(struct pci_dev *dev, int bars) { int err; + u16 cmd; + u8 pin; err = pci_set_power_state(dev, PCI_D0); if (err < 0 && err != -EIO) @@ -1190,6 +1192,14 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars) return err; pci_fixup_device(pci_fixup_enable, dev); + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & PCI_COMMAND_INTX_DISABLE) + pci_write_config_word(dev, PCI_COMMAND, + cmd & ~PCI_COMMAND_INTX_DISABLE); + } + return 0; }