Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "I2C has some bugfixes for you: mainly Jarkko fixed up a few things in
  the designware driver regarding the new slave mode. But Ulf also fixed
  a long-standing and now agreed suspend problem. Plus, some simple
  stuff which nonetheless needs fixing"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Fix runtime PM for I2C slave mode
  i2c: designware: Remove needless pm_runtime_put_noidle() call
  i2c: aspeed: fixed potential null pointer dereference
  i2c: simtec: use release_mem_region instead of release_resource
  i2c: core: Make comment about I2C table requirement to reflect the code
  i2c: designware: Fix standard mode speed when configuring the slave mode
  i2c: designware: Fix oops from i2c_dw_irq_handler_slave
  i2c: designware: Fix system suspend

drivers/i2c/busses/i2c-aspeed.c

@@ -410,10 +410,11 @@ static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
 	}
 
 	/* We are in an invalid state; reset bus to a known state. */
-	if (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP) {
+	if (!bus->msgs) {
 		dev_err(bus->dev, "bus in unknown state");
 		bus->cmd_err = -EIO;
-		aspeed_i2c_do_stop(bus);
+		if (bus->master_state != ASPEED_I2C_MASTER_STOP)
+			aspeed_i2c_do_stop(bus);
 		goto out_no_complete;
 	}
 	msg = &bus->msgs[bus->msgs_index];

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -198,8 +198,7 @@ static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
 	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
 
 	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
-			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
-			 DW_IC_CON_SPEED_FAST;
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED;
 
 	dev->mode = DW_IC_SLAVE;
 
@@ -430,7 +429,7 @@ static void dw_i2c_plat_complete(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM
-static int dw_i2c_plat_suspend(struct device *dev)
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
@@ -452,11 +451,21 @@ static int dw_i2c_plat_resume(struct device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_suspend(struct device *dev)
+{
+	pm_runtime_resume(dev);
+	return dw_i2c_plat_runtime_suspend(dev);
+}
+#endif
+
 static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
 	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
+			   dw_i2c_plat_resume,
+			   NULL)
 };
 
 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)

drivers/i2c/busses/i2c-designware-slave.c

@@ -177,6 +177,8 @@ static int i2c_dw_reg_slave(struct i2c_client *slave)
 		return -EBUSY;
 	if (slave->flags & I2C_CLIENT_TEN)
 		return -EAFNOSUPPORT;
+	pm_runtime_get_sync(dev->dev);
+
 	/*
 	 * Set slave address in the IC_SAR register,
 	 * the address to which the DW_apb_i2c responds.
@@ -205,6 +207,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 	dev->disable_int(dev);
 	dev->disable(dev);
 	dev->slave = NULL;
+	pm_runtime_put(dev->dev);
 
 	return 0;
 }
@@ -272,7 +275,7 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
 	slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
 		DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
 
-	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY))
+	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave)
 		return 0;
 
 	dev_dbg(dev->dev,
@@ -382,7 +385,6 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret)
 		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
-	pm_runtime_put_noidle(dev->dev);
 
 	return ret;
 }

drivers/i2c/busses/i2c-simtec.c

@@ -127,8 +127,7 @@ static int simtec_i2c_probe(struct platform_device *dev)
 	iounmap(pd->reg);
 
  err_res:
-	release_resource(pd->ioarea);
-	kfree(pd->ioarea);
+	release_mem_region(pd->ioarea->start, size);
 
  err:
 	kfree(pd);
@@ -142,8 +141,7 @@ static int simtec_i2c_remove(struct platform_device *dev)
 	i2c_del_adapter(&pd->adap);
 
 	iounmap(pd->reg);
-	release_resource(pd->ioarea);
-	kfree(pd->ioarea);
+	release_mem_region(pd->ioarea->start, resource_size(pd->ioarea));
 	kfree(pd);
 
 	return 0;

drivers/i2c/i2c-core-base.c

@@ -353,8 +353,8 @@ static int i2c_device_probe(struct device *dev)
 	}
 
 	/*
-	 * An I2C ID table is not mandatory, if and only if, a suitable Device
-	 * Tree match table entry is supplied for the probing device.
+	 * An I2C ID table is not mandatory, if and only if, a suitable OF
+	 * or ACPI ID table is supplied for the probing device.
 	 */
 	if (!driver->id_table &&
 	    !i2c_acpi_match_device(dev->driver->acpi_match_table, client) &&