genirq: Handle NOAUTOEN interrupt setup proper

If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq().  The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().

That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.

If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.

Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
This commit is contained in:
Thomas Gleixner 2017-05-31 11:58:32 +02:00
Родитель 5a29ef2209
Коммит 201d7f47f3
3 изменённых файлов: 69 добавлений и 25 удалений

Просмотреть файл

@ -216,6 +216,7 @@ enum {
IRQD_WAKEUP_ARMED = (1 << 19),
IRQD_FORWARDED_TO_VCPU = (1 << 20),
IRQD_AFFINITY_MANAGED = (1 << 21),
IRQD_IRQ_STARTED = (1 << 22),
};
#define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
@ -329,6 +330,11 @@ static inline void irqd_clr_activated(struct irq_data *d)
__irqd_to_state(d) &= ~IRQD_ACTIVATED;
}
static inline bool irqd_is_started(struct irq_data *d)
{
return __irqd_to_state(d) & IRQD_IRQ_STARTED;
}
#undef __irqd_to_state
static inline irq_hw_number_t irqd_to_hwirq(struct irq_data *d)

Просмотреть файл

@ -185,37 +185,64 @@ static void irq_state_set_masked(struct irq_desc *desc)
irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
}
static void irq_state_clr_started(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_STARTED);
}
static void irq_state_set_started(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_STARTED);
}
int irq_startup(struct irq_desc *desc, bool resend)
{
int ret = 0;
irq_state_clr_disabled(desc);
desc->depth = 0;
irq_domain_activate_irq(&desc->irq_data);
if (desc->irq_data.chip->irq_startup) {
ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
irq_state_clr_masked(desc);
} else {
if (irqd_is_started(&desc->irq_data)) {
irq_enable(desc);
} else {
irq_domain_activate_irq(&desc->irq_data);
if (desc->irq_data.chip->irq_startup) {
ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
irq_state_clr_disabled(desc);
irq_state_clr_masked(desc);
} else {
irq_enable(desc);
}
irq_state_set_started(desc);
}
if (resend)
check_irq_resend(desc);
return ret;
}
static void __irq_disable(struct irq_desc *desc, bool mask);
void irq_shutdown(struct irq_desc *desc)
{
irq_state_set_disabled(desc);
desc->depth = 1;
if (desc->irq_data.chip->irq_shutdown)
desc->irq_data.chip->irq_shutdown(&desc->irq_data);
else if (desc->irq_data.chip->irq_disable)
desc->irq_data.chip->irq_disable(&desc->irq_data);
else
desc->irq_data.chip->irq_mask(&desc->irq_data);
if (irqd_is_started(&desc->irq_data)) {
desc->depth = 1;
if (desc->irq_data.chip->irq_shutdown) {
desc->irq_data.chip->irq_shutdown(&desc->irq_data);
irq_state_set_disabled(desc);
irq_state_set_masked(desc);
} else {
__irq_disable(desc, true);
}
irq_state_clr_started(desc);
}
/*
* This must be called even if the interrupt was never started up,
* because the activation can happen before the interrupt is
* available for request/startup. It has it's own state tracking so
* it's safe to call it unconditionally.
*/
irq_domain_deactivate_irq(&desc->irq_data);
irq_state_set_masked(desc);
}
void irq_enable(struct irq_desc *desc)
@ -228,6 +255,17 @@ void irq_enable(struct irq_desc *desc)
irq_state_clr_masked(desc);
}
static void __irq_disable(struct irq_desc *desc, bool mask)
{
irq_state_set_disabled(desc);
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
} else if (mask) {
mask_irq(desc);
}
}
/**
* irq_disable - Mark interrupt disabled
* @desc: irq descriptor which should be disabled
@ -250,13 +288,7 @@ void irq_enable(struct irq_desc *desc)
*/
void irq_disable(struct irq_desc *desc)
{
irq_state_set_disabled(desc);
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
} else if (irq_settings_disable_unlazy(desc)) {
mask_irq(desc);
}
__irq_disable(desc, irq_settings_disable_unlazy(desc));
}
void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)

Просмотреть файл

@ -533,9 +533,15 @@ void __enable_irq(struct irq_desc *desc)
goto err_out;
/* Prevent probing on this irq: */
irq_settings_set_noprobe(desc);
irq_enable(desc);
check_irq_resend(desc);
/* fall-through */
/*
* Call irq_startup() not irq_enable() here because the
* interrupt might be marked NOAUTOEN. So irq_startup()
* needs to be invoked when it gets enabled the first
* time. If it was already started up, then irq_startup()
* will invoke irq_enable() under the hood.
*/
irq_startup(desc, true);
break;
}
default:
desc->depth--;