mmc: renesas_sdhi: add initial setting of interrupt mask register

The initial value of the interrupt mask register may be different from
the H/W manual at the startup of the kernel by setting from the
bootloader. Since the error interrupts may be unmasked, the driver sets
initial value.

The initial value is only known for R-Car Gen2 and Gen3 platforms so
limit the initialization to those platforms.

Based on work from Masaharu Hayakawa.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/renesas_sdhi_core.c

@@ -523,6 +523,10 @@ static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host)
 	sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL,
 		       ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN &
 		       sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
+
+	if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+		sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK,
+					     TMIO_MASK_INIT_RCAR2);
 }
 
 static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit)

drivers/mmc/host/tmio_mmc.h

@@ -96,6 +96,7 @@
 
 /* Define some IRQ masks */
 /* This is the mask used at reset by the chip */
+#define TMIO_MASK_INIT_RCAR2	0x8b7f031d /* Initial value for R-Car Gen2+ */
 #define TMIO_MASK_ALL           0x837f031d
 #define TMIO_MASK_READOP  (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND)
 #define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND)