net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function

On the one hand, phy_device.c provides a generic reset function if the phy
driver does not provide a soft_reset pointer. This generic reset does not take
into account the state of the phy, with a potential failure if the phy is in
powerdown mode. On the other hand, smsc driver provides a function with both
correct reset behaviour and configuration.

This patch moves the reset part into a new smsc_phy_reset function and provides
the soft_reset pointer to have a correct reset behaviour by default.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/smsc.c

@@ -42,6 +42,22 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 }
 
 static int smsc_phy_config_init(struct phy_device *phydev)
+{
+	int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+
+	if (rc < 0)
+		return rc;
+
+	/* Enable energy detect mode for this SMSC Transceivers */
+	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+		       rc | MII_LAN83C185_EDPWRDOWN);
+	if (rc < 0)
+		return rc;
+
+	return smsc_phy_ack_interrupt(phydev);
+}
+
+static int smsc_phy_reset(struct phy_device *phydev)
 {
 	int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
 	if (rc < 0)
@@ -66,18 +82,7 @@ static int smsc_phy_config_init(struct phy_device *phydev)
 			rc = phy_read(phydev, MII_BMCR);
 		} while (rc & BMCR_RESET);
 	}
-
-	rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
-	if (rc < 0)
-		return rc;
-
-	/* Enable energy detect mode for this SMSC Transceivers */
-	rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
-		       rc | MII_LAN83C185_EDPWRDOWN);
-	if (rc < 0)
-		return rc;
-
-	return smsc_phy_ack_interrupt (phydev);
+	return 0;
 }
 
 static int lan911x_config_init(struct phy_device *phydev)
@@ -142,6 +147,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
@@ -164,6 +170,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
@@ -186,6 +193,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,
@@ -230,6 +238,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= lan87xx_read_status,
 	.config_init	= smsc_phy_config_init,
+	.soft_reset	= smsc_phy_reset,
 
 	/* IRQ related */
 	.ack_interrupt	= smsc_phy_ack_interrupt,